Mine let rip on Monday, although mine is a different pedal box (Zetec), I am sure the procedure is the same. It is literally a 5 minute job, but you do need double jointed upper torso and arms. You don't need to take the pedal box off. Just get down, unhook it at both ends (head first into the footwell!!!!!). Pull the pedal all the way back up to release the quadrant ratchet. Thread the new cable through, hook up to the pedal first, then the clutch lever arm. Press the pedal a few times and you're away. Bought mine from motor factors for about £12. Good luck.
-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). To unsubscribe, reply using "remove me" as the subject.
