Geoff.
After breaking down on the M25 with your car the other Friday Eve. Did
you or Steve re do the connections to the Maf sensor as they were
corroded....as the symptoms were very erratic idle, high idle and
eventually fuel loss. when the breakdown chap played with the connection
it improved and idled properly, when we arrived at yours it was still
idling a little high though.
Andy.
----- Original Message -----
From: geoff ward
To: [email protected]
Sent: Monday, June 07, 2010 11:06 AM
Subject: Re: [Quantum Owners] Poor idling/running Zetec
Jim,
Disconnecting the MAF was very similar to disconnecting the idle speed
control valve or the throttle position sensor, it will idle at a more
sensible speed but runs really rough. We used the loom from the doner
escort, plastic inlet.
Geoff.
On 7 June 2010 10:54, Jim Hearne<[email protected]> wrote:
When you fitted the alloy inlet manifold which injector wiring loom
did you fit, the one from the alloy manifold or the one from the Escort
plastic manifold ?
As somebody else found recently there are slight wiring differences
between the 2 involving the cam sensor and air temperature sensors.
Jim
On 07/06/2010 10:42, geoff ward wrote:
Hi Jim,
Not sure about that, don't know what you mean by throttle pot,
hopefully Steve will respond. At the moment the car is in Aylesbury but
has been at Steve's near Woking.
Geoff.
On 7 June 2010 10:28, Jim Hearne<[email protected]> wrote:
Did you do any electrical tests on the throttle pot.
Where is the car ?
Jim
On 07/06/2010 10:19, geoff ward wrote:
Hi all and thanks again for all the helpful suggestions.
Steve and I have checked and double checked through all that
has been suggested, every thing seems to work as it should individually.
The idle speed control vale has been thoroughly cleaned again and
checked to see that it works, then refitted with a new gasket and that
it receives input, electronically, from its plug. Steve has checked all
the connections with his testing equipment, it's all beyond me!, and it
all works. We have reset the ECU yet again, despite spending all day
Saturday trying to get it to run properly, it still has the same
problem. Thank you Steve for all the time and effort you have put in so
far to try and fix it. So if any of you have any further suggestions, we
would be pleased to hear them, as Carole and I are getting worried now,
with only one weekend to go before we head to Scotland.
Yours hopefully Geoff.
On 1 June 2010 22:59, geoff ward<[email protected]>
wrote:
Thank you to all for your help and advice, I will do a bit
more checking and cleaning of contacts etc tomorrow. The strangest
thing,as Steve mentioned in his original post, is that the engine idles
perfectly at around 900 - 1000 rpm (according to the XR2 rev counter)
when you first start it up. I have followed the method for resetting the
ECU 4 times know and it has had good idle speed every time for the first
stage of the reset, ie allow to idle for 10 -15 mins (DO NOT TOUCH THE
THROTTLE) it only goes all wrong after that! As soon as you start to
drive it, that's when it wont idle properly anymore.
Carole say thank you all.
Regards, Geoff.
On 1 June 2010 12:29, Steve Kodz<[email protected]>
wrote:
We're getting a very bad idle with the Zetec in Carole's
2+2. With the idle speed control valve connected from cold it will idle
nicely at around 1000rpm, if just left to idle and warm through.
However if you rev, or drive that car the best idle to can get is
between 2-3,000 rpm, which isn't great :( The car also drives badly,
having hesitation and then you fight the engine on the over run.
It is a lot better with the ISCV disconnected, but still
not great. The idle is still a bit high, being around 1,200 rpm and it
still doesn't drive that great.
We've tried resetting the ECU to re-program it and Geoff's
cleaned all the electrical contact and the ISCV. Any ideas what else
needs to be done to get this ready before the HHII?
Regards,
Steve
--
www.h4-turbo.co.uk
www.quantumowners.co.uk
www.quantumcars.co.uk
www.quantumheritage.co.uk
--
You received this message because you are subscribed to the
Google Groups "Quantum Owners Group" group. To post to this group, send
email to [email protected] To unsubscribe from this group,
send email to [email protected] For more
options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is
provided on an "As Is" basis, without warranty or the implication
thereof. Neither the Quantum Owners Club nor the individuals associated
with the Quantum Owners Club or in the preparation of the above
information shall have any liability to any person or entity with
respect to liability, loss, or damage caused or alleged to be caused
directly or indirectly by the instructions contained within this or
related message(s).
You received this message because you are subscribed to the
Google Groups "Quantum Owners Group" group. To post to this group, send
email to [email protected] To unsubscribe from this group,
send email to [email protected] For more
options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided
on an "As Is" basis, without warranty or the implication thereof.
Neither the Quantum Owners Club nor the individuals associated with the
Quantum Owners Club or in the preparation of the above information shall
have any liability to any person or entity with respect to liability,
loss, or damage caused or alleged to be caused directly or indirectly by
the instructions contained within this or related message(s).
You received this message because you are subscribed to the
Google Groups "Quantum Owners Group" group. To post to this group, send
email to [email protected] To unsubscribe from this group,
send email to [email protected] For more
options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on
an "As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the Quantum
Owners Club or in the preparation of the above information shall have
any liability to any person or entity with respect to liability, loss,
or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group. To post to this group, send email
to [email protected] To unsubscribe from this group, send
email to [email protected] For more options,
visit this group at http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on
an "As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the Quantum
Owners Club or in the preparation of the above information shall have
any liability to any person or entity with respect to liability, loss,
or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).