Thank you to all for your help and advice, I will do a bit more checking and
cleaning of contacts etc  tomorrow. The strangest thing,as Steve mentioned
in his original post, is that the engine idles perfectly
at around 900 - 1000 rpm (according to the XR2 rev counter) when you first
start it up. I have followed the method for resetting the ECU 4 times know
and it has had good idle speed every time for the first stage of the reset,
ie allow to idle for 10 -15 mins (DO NOT TOUCH THE THROTTLE) it only goes
all wrong after that! As soon as you start to drive it, that's when it wont
idle properly anymore.

Carole say thank you all.

Regards, Geoff.
On 1 June 2010 12:29, Steve Kodz <[email protected]> wrote:

> We're getting a very bad idle with the Zetec in Carole's 2+2.  With the
> idle
> speed control valve connected from cold it will idle nicely at around
> 1000rpm, if just left to idle and warm through.  However if you rev, or
> drive that car the best idle to can get is between 2-3,000 rpm, which isn't
> great :(  The car also drives badly, having hesitation and then you fight
> the engine on the over run.
>
> It is a lot better with the ISCV disconnected, but still not great.  The
> idle is still a bit high, being around 1,200 rpm and it still doesn't drive
> that great.
>
> We've tried resetting the ECU to re-program it and Geoff's cleaned all the
> electrical contact and the ISCV.  Any ideas what else needs to be done to
> get this ready before the HHII?
>
> Regards,
> Steve
> --
> www.h4-turbo.co.uk
> www.quantumowners.co.uk
> www.quantumcars.co.uk
> www.quantumheritage.co.uk
>
> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to [email protected]
> To unsubscribe from this group, send email to
> [email protected]
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to