Hi. I've started a new post because the existing one was getting cluttered. On my H4 I noticed that there was surface rust on the rear chassis in the engine bay. Lots of Kurust, Hammerite rust killer primer & Hammerite smooth cured that. ( the front chassis is covered with a fine coating of oil so no rust there!). The chassis rails in the wet area seem sound, (tested with my mk 1 pointed scewdriver ) but the coating is suspect. My usual response would be to spray the cavity with Waxoil but have been told that this is not compatible with fiberglass. Can anyone confirm or deny this? Plan B would be to use old engine oil, taking precautions to collect & dispose of the excess.Cheaper but effective, as used on older cars to prevent rust in the distant past. JimT
-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
