So I'm assuming that this jack didn't have enough detail for you? http://www.ebay.com/itm/FOA-Tiger-Tank-Working-Jack-/400255022934?pt=LH_DefaultDomain_0&hash=item5d310ef756#ht_500wt_1156
Derek On Sun, Nov 6, 2011 at 9:36 PM, <[email protected]> wrote: > Thanks Chris, this is actually an experiment. Please see attached pic. > They come in many different materials and different prices. We are > starting with the cheapest and hope that the detail will show and will go > from there. Keeping our fingers crossed that the details will show. :) > > John > > > On 11/06/11, [email protected] wrote: > In a message dated 11/6/2011 9:04:23 A.M. Eastern Standard Time, > [email protected] writes: > > Pulled the trigger yesterday and sent my 20 ton jack to Shapeway's for > printing. Charlie thanks for the name I had never heard of them. Only > cost $25.00 to have it printed. When it arrives will get it to Frank and > see if it's ok for molding. If so we will try it with a sprocket next, > hopefully I didn't screw it up to badly. :) > > John > > i'd be curious to see pictures of the jack when it arrives and some > close-ups of it to see how well it turned out. $25.00 seems to be very > cheap and hope because it's round it doesn't turn out bad. > > Chris, > Odyssey Slipways <http://hometown.aol.com/odysseyslipways/index.html> > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
