sorry, forgot until just now about the attached file........ lol, is this the guys over in Russia? i was just looking at this monster myself the other day and emailed them about some parts and if i could buy them from them. does your build have to be exactly like this? as in the way they built the suspension, sprockets and the likes? as for that type of suspension, unless you know exactly how they do it and can get all of the parts done the same way, i'd opt for suspension such as on the Tiger. as for the sprockets, i'd mount them to the sides of a main hub and use the hub to secure it tot he shaft. for my tiger, i'll be adding some parts to the sides of the sprockets to make it look just like the sprocket wheel, but instead, replace the teeth with an O-ring. the finished part would slip onto the shaft and stick tot he sprocket using a few glued in (strong) magnets. this way if for some reason it did break, i could at least easily replace the piece on the outside (inside would require removing the sprocket Chris, _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html)
-- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
