Hi
could it be something to do with the controller, ie spike on the supply, or
maybe RF getting into it.
Steve
----- Original Message -----
From: "Scott" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Saturday, April 08, 2006 11:50 PM
Subject: [Repeater-Builder] Weird Kerchuking Problem
> Here's the problem...
>
> Every so often (several times in 10 minutes) we are getting a key up
> of our repeater.
>
> Here is what we know...
> There is no signal coming in on the input frequency. No even a small
> spike. It is almost like something in the set up is timing and keying,
> but it is not an exact interval. Doesn't matter is RX tone is enabled
> in the CAT or not.
>
> Here is the setup...
> Motorola Mitrek trunk mount on 443.275, CAT 250 controller, Com-Spec
> TS64DS tone board. It has a good 300W 3 can duplexer that is tuned
> correctly and working well. 75Amp power supply. The cabinet also has
> an APRS rig in it, as well as a remote receiver for another repeater,
> and a link radio, but NONE of that is even turned on (and doesn't make
> a difference when it is).
>
> Suggestions as to what to look for...?
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.4.0/304 - Release Date: 07/04/06
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
