Built a box structure out of 1x2" to stiffen my english style sector table.
A 2'x8' piece of 3/4" plywood supported only on the far ends can get quite a
bit of sag in the middle. Wired tracks on one end.
I've drilled holes for 3/16" bolts in the middle of the tracks at the end to
stop the trains running off the table. Bolts are removable when their track is
live.
Hoped to run an op session next week, but much paperwork and labeling on the
layout remain.
I'm 200 miles or 4 hours from Chattanooga but hope to have the layout
humming by the NASG convention just in case someone drives through on the way
down or back.
George Courtney
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
