brew doctor is giving lots of errors about unbrewed files: trevorkarn@Trevors-MacBook-Air sage % brew doctor
*Please note that these warnings are just used to help the Homebrew maintainers* *with debugging if you file an issue. If everything you use Homebrew for is* *working fine: please don't worry or file an issue; just ignore this. Thanks!* Warning: Unbrewed dylibs were found in /usr/local/lib. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected dylibs: /usr/local/lib/libtcl8.6.dylib /usr/local/lib/libtk8.6.dylib Warning: Unbrewed header files were found in /usr/local/include. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected header files: /usr/local/include/fakemysql.h /usr/local/include/fakepq.h /usr/local/include/fakesql.h /usr/local/include/itcl.h /usr/local/include/itcl2TclOO.h /usr/local/include/itclDecls.h /usr/local/include/itclInt.h /usr/local/include/itclIntDecls.h /usr/local/include/itclMigrate2TclCore.h /usr/local/include/itclTclIntStubsFcn.h /usr/local/include/mysqlStubs.h /usr/local/include/odbcStubs.h /usr/local/include/pqStubs.h /usr/local/include/tcl.h /usr/local/include/tclDecls.h /usr/local/include/tclOO.h /usr/local/include/tclOODecls.h /usr/local/include/tclPlatDecls.h /usr/local/include/tclThread.h /usr/local/include/tclTomMath.h /usr/local/include/tclTomMathDecls.h /usr/local/include/tdbc.h /usr/local/include/tdbcDecls.h /usr/local/include/tdbcInt.h /usr/local/include/tk.h /usr/local/include/tkDecls.h /usr/local/include/tkPlatDecls.h Warning: Unbrewed '.pc' files were found in /usr/local/lib/pkgconfig. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected '.pc' files: /usr/local/lib/pkgconfig/tcl.pc /usr/local/lib/pkgconfig/tk.pc Warning: Unbrewed static libraries were found in /usr/local/lib. If you didn't put them there on purpose they could cause problems when building Homebrew formulae, and may need to be deleted. Unexpected static libraries: /usr/local/lib/libtclstub8.6.a /usr/local/lib/libtkstub8.6.a Warning: You have unlinked kegs in your Cellar. Leaving kegs unlinked can lead to build-trouble and cause formulae that depend on those kegs to fail to run properly once built. Run `brew link` on these: ffmpeg ghostscript Warning: Homebrew's "sbin" was not found in your PATH but you have installed formulae that put executables in /usr/local/sbin. Consider setting your PATH for example like so: echo 'export PATH="/usr/local/sbin:$PATH"' >> ~/.zshrc Warning: Broken symlinks were found. Remove them with `brew cleanup`: /usr/local/bin/git-trac /usr/local/share/ghostscript/9.27/Resource/Font/wasy10.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasy5.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasy6.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasy7.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasy8.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasy9.pfb /usr/local/share/ghostscript/9.27/Resource/Font/wasyb10.pfb /usr/local/share/man/man1/brew-cask.1 /usr/local/share/zsh/site-functions/_brew_cask trevorkarn@Trevors-MacBook-Air sage % brew cleanup Removing: /usr/local/Cellar/gettext/0.20.1... (1,899 files, 18.5MB) Removing: /usr/local/Cellar/gmp/6.1.2_2... (18 files, 3.1MB) Removing: /usr/local/Cellar/gnutls/3.6.9... (1,227 files, 9.9MB) Removing: /usr/local/Cellar/icu4c/64.2... (257 files, 69.2MB) Removing: /usr/local/Cellar/libevent/2.1.11... (1,063 files, 5MB) Removing: /usr/local/Cellar/libffi/3.2.1... (16 files, 296.8KB) Removing: /usr/local/Cellar/libidn2/2.2.0_1... (70 files, 700.9KB) Removing: /usr/local/Cellar/libtasn1/4.14... (59 files, 384KB) Removing: /usr/local/Cellar/nettle/3.4.1... (85 files, 2MB) Error: Interrupted system call @ dir_initialize - /usr/local/Cellar/opus trevorkarn@Trevors-MacBook-Air sage % ;2D Best Regards, Trevor Karn On Mon, Feb 8, 2021 at 8:38 PM Zachary Scherr <[email protected]> wrote: > In your original config.log, it looked like sage was picking up its own > fortran: > > configure:11991: gfortran has already been installed by SageMath > configure:39396: result: gfortran-9.2.0: > already installed as an SPKG > > The current version of gfortran from homebrew is 10.2.0 version 3 > > GNU Fortran (Homebrew GCC 10.2.0_3) 10.2.0 > Copyright (C) 2020 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > ./configure should be picking up homebrew's gfortran (installed with gcc), > and it seems from your config.log file that you do have homebrew and > therefore you should have the most recent gfortran. > Do you have the newest config.log file from after running make distclean? > You may also want to try running > > brew doctor > > to see if there is something wrong with your homebrew. > On Monday, February 8, 2021 at 9:27:11 PM UTC-5 Trevor Karn wrote: > >> Unfortunately, that did not seem to work. >> >> Here are the last few lines of the terminal output and I've attached the >> numpy log. >> >> [singular-4.1.1p2.p0] real 28m38.843s >> >> [singular-4.1.1p2.p0] user 24m18.545s >> >> [singular-4.1.1p2.p0] sys 3m53.423s >> >> [singular-4.1.1p2.p0] Copying package files from temporary location >> /Users/trevorkarn/Applications/sage/local/var/tmp/sage/build/singular-4.1.1p2.p0/inst >> to /Users/trevorkarn/Applications/sage/local >> >> [singular-4.1.1p2.p0] Successfully installed singular-4.1.1p2.p0 >> >> [singular-4.1.1p2.p0] Deleting temporary build directory >> >> [singular-4.1.1p2.p0] >> /Users/trevorkarn/Applications/sage/local/var/tmp/sage/build/singular-4.1.1p2.p0 >> >> [singular-4.1.1p2.p0] Finished installing singular-4.1.1p2.p0 >> >> make[2]: *** [all-build] Error 2 >> >> >> real 182m14.796s >> >> user 355m33.883s >> >> sys 72m32.388s >> >> *************************************************************** >> >> Error building Sage. >> >> >> The following package(s) may have failed to build (not necessarily >> >> during this run of 'make all-build'): >> >> >> * package: numpy-1.19.4 >> >> last build time: Feb 8 19:48 >> >> log file: >> /Users/trevorkarn/Applications/sage/logs/pkgs/numpy-1.19.4.log >> >> build directory: >> /Users/trevorkarn/Applications/sage/local/var/tmp/sage/build/numpy-1.19.4 >> >> >> It is safe to delete any log files and build directories, but they >> >> contain information that is helpful for debugging build problems. >> >> WARNING: If you now run 'make' again, the build directory of the >> >> same version of the package will, by default, be deleted. Set the >> >> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. >> >> >> make[1]: *** [all-build] Error 1 >> >> make: *** [build] Error 2 >> >> trevorkarn@Trevors-MacBook-Air sage % >> >> >> Best Regards, >> >> Trevor Karn >> >> >> On Mon, Feb 8, 2021 at 1:56 PM Zachary Scherr <[email protected]> wrote: >> >>> yea, something seems messed up. For example, the numpy problem was >>> fixed on beta 6 and should still be fixed in beta 7. It looks like somehow >>> you have old files hanging around which are causing problems. Hopefully >>> make distclean will clean everything and let you start fresh. >>> >>> On Monday, February 8, 2021 at 2:25:16 PM UTC-5 Trevor Karn wrote: >>> >>>> I must have typed it wrong. The second option you gave failed on numpy, >>>> but I tried the first option again, and it is compiling. >>>> >>>> Best Regards, >>>> >>>> Trevor Karn >>>> >>>> >>>> On Mon, Feb 8, 2021 at 11:31 AM Zachary Scherr <[email protected]> >>>> wrote: >>>> >>>>> Are you sure you typed it correctly? Maybe try running >>>>> >>>>> ./bootstrap >>>>> >>>>> to make sure that the make targets are in order. >>>>> >>>>> On Monday, February 8, 2021 at 12:27:01 PM UTC-5 Trevor Karn wrote: >>>>> >>>>>> I tried make distclean and got an error “make: *** No rule to make >>>>>> target ‘distclean’. Stop.” >>>>>> >>>>>> So I tried your second suggestion and it seems to be working so far, >>>>>> but it is still compiling. >>>>>> >>>>>> On Mon, Feb 8, 2021 at 10:29 AM Zachary Scherr <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Probably the thing to try would be: >>>>>>> >>>>>>> make distclean >>>>>>> >>>>>>> and then you can build from scratch via: >>>>>>> >>>>>>> ./bootstrap >>>>>>> source .homebrew-build-env >>>>>>> ./configure >>>>>>> make -j4 build >>>>>>> >>>>>>> But if you want to try cleaning wheel first before starting from >>>>>>> scratch, you could just try >>>>>>> >>>>>>> make wheel-clean >>>>>>> make -j4 build >>>>>>> >>>>>>> but it might be better to clean everything and start from scratch. >>>>>>> >>>>>>> On Monday, February 8, 2021 at 10:59:05 AM UTC-5 Trevor Karn wrote: >>>>>>> >>>>>>>> I do not see pep425tags.py in that directory. >>>>>>>> >>>>>>>> trevorkarn@Trevors-MacBook-Air sage % cd >>>>>>>> /Users/trevorkarn/Applications/sage/local/lib/python3.9/site-packages/wheel/ >>>>>>>> >>>>>>>> trevorkarn@Trevors-MacBook-Air wheel % ls >>>>>>>> >>>>>>>> __init__.py __pycache__ cli metadata.py util.py wheelfile.py >>>>>>>> >>>>>>>> __main__.py bdist_wheel.py macosx_libfile.py pkginfo.py vendored >>>>>>>> >>>>>>>> Is there a way to clean the build environment? >>>>>>>> >>>>>>>> Best Regards, >>>>>>>> >>>>>>>> Trevor Karn >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Feb 8, 2021 at 9:54 AM Dima Pasechnik <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> the only explanation for pep425tags.py would be an unclean build >>>>>>>>> environment - e.g. weird env vars set, or strange stuff in PATH. >>>>>>>>> >>>>>>>>> On Mon, Feb 8, 2021 at 3:51 PM Zachary Scherr <[email protected]> >>>>>>>>> wrote: >>>>>>>>> > >>>>>>>>> > and do you see that pep425tags.py file in that directory? >>>>>>>>> > >>>>>>>>> > On Monday, February 8, 2021 at 10:21:09 AM UTC-5 Trevor Karn >>>>>>>>> wrote: >>>>>>>>> >> >>>>>>>>> >> The only contents of the file you pointed me towards are >>>>>>>>> >> >>>>>>>>> >> __version__ = '0.36.2' >>>>>>>>> >> >>>>>>>>> >> Best Regards, >>>>>>>>> >> >>>>>>>>> >> Trevor Karn >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >> On Mon, Feb 8, 2021 at 9:09 AM Zachary Scherr <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>> >>>>>>>>> >>> I really don't understand. The Cython log file shows that the >>>>>>>>> problem is in >>>>>>>>> >>> >>>>>>>>> >>> >>>>>>>>> /Users/trevorkarn/Applications/sage/local/lib/python3.9/site-packages/wheel/pep425tags.py >>>>>>>>> >>> >>>>>>>>> >>> I could be mistaken, but I don't think pep425tags.py has been >>>>>>>>> a part of the wheel package for a while now. Certainly when I looked >>>>>>>>> at >>>>>>>>> wheel on my sage there was no such file. >>>>>>>>> >>> >>>>>>>>> >>> Can you go to your >>>>>>>>> "/Users/trevorkarn/Applications/sage/local/lib/python3.9/site-packages/wheel/" >>>>>>>>> directory and take a look at __init__.py. Does the version say >>>>>>>>> 0.36.2? >>>>>>>>> >>> >>>>>>>>> >>> On Monday, February 8, 2021 at 9:32:20 AM UTC-5 Trevor Karn >>>>>>>>> wrote: >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> Here is what I get. It seems like it is the same as yours? >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> trevorkarn@Trevors-MacBook-Air sage % brew info python3 >>>>>>>>> >>>> >>>>>>>>> >>>> [email protected]: stable 3.9.1 >>>>>>>>> >>>> >>>>>>>>> >>>> Interpreted, interactive, object-oriented programming language >>>>>>>>> >>>> >>>>>>>>> >>>> https://www.python.org/ >>>>>>>>> >>>> >>>>>>>>> >>>> /usr/local/Cellar/[email protected]/3.9.1_8 (8,665 files, 129.4MB) * >>>>>>>>> >>>> >>>>>>>>> >>>> Built from source on 2021-02-05 at 16:39:31 >>>>>>>>> >>>> >>>>>>>>> >>>> From: >>>>>>>>> https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/[email protected] >>>>>>>>> >>>> >>>>>>>>> >>>> License: Python-2.0 >>>>>>>>> >>>> >>>>>>>>> >>>> ==> Dependencies >>>>>>>>> >>>> >>>>>>>>> >>>> Build: pkg-config ✔ >>>>>>>>> >>>> >>>>>>>>> >>>> Required: gdbm ✔, [email protected] ✔, readline ✔, sqlite ✔, >>>>>>>>> tcl-tk ✔, xz ✔ >>>>>>>>> >>>> >>>>>>>>> >>>> ==> Caveats >>>>>>>>> >>>> >>>>>>>>> >>>> Python has been installed as >>>>>>>>> >>>> >>>>>>>>> >>>> /usr/local/bin/python3 >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> Unversioned symlinks `python`, `python-config`, `pip` etc. >>>>>>>>> pointing to >>>>>>>>> >>>> >>>>>>>>> >>>> `python3`, `python3-config`, `pip3` etc., respectively, have >>>>>>>>> been installed into >>>>>>>>> >>>> >>>>>>>>> >>>> /usr/local/opt/[email protected]/libexec/bin >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> You can install Python packages with >>>>>>>>> >>>> >>>>>>>>> >>>> pip3 install <package> >>>>>>>>> >>>> >>>>>>>>> >>>> They will install into the site-package directory >>>>>>>>> >>>> >>>>>>>>> >>>> /usr/local/lib/python3.9/site-packages >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> See: https://docs.brew.sh/Homebrew-and-Python >>>>>>>>> >>>> >>>>>>>>> >>>> ==> Analytics >>>>>>>>> >>>> >>>>>>>>> >>>> install: 755,419 (30 days), 2,396,024 (90 days), 2,995,387 >>>>>>>>> (365 days) >>>>>>>>> >>>> >>>>>>>>> >>>> install-on-request: 244,063 (30 days), 714,665 (90 days), >>>>>>>>> 799,812 (365 days) >>>>>>>>> >>>> >>>>>>>>> >>>> build-error: 0 (30 days) >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> Best Regards, >>>>>>>>> >>>> >>>>>>>>> >>>> Trevor Karn >>>>>>>>> >>>> >>>>>>>>> >>>> >>>>>>>>> >>>> On Mon, Feb 8, 2021 at 8:17 AM Dima Pasechnik < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> >>>>>>>>> >>>>> Could it be that you need to update your Homebrew (?) >>>>>>>>> python3 package? >>>>>>>>> >>>>> What version do you have now? >>>>>>>>> >>>>> E.g. on a box where the latest Sage builds I have >>>>>>>>> >>>>> >>>>>>>>> >>>>> % brew info python3 >>>>>>>>> >>>>> >>>>>>>>> >>>>> [email protected]: stable 3.9.1 (bottled) >>>>>>>>> >>>>> Interpreted, interactive, object-oriented programming >>>>>>>>> language >>>>>>>>> >>>>> https://www.python.org/ >>>>>>>>> >>>>> /usr/local/Cellar/[email protected]/3.9.1_8 (4,057 files, 67.8MB) * >>>>>>>>> >>>>> Poured from bottle on 2021-02-06 at 10:13:24 >>>>>>>>> >>>>> From: >>>>>>>>> https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/[email protected] >>>>>>>>> >>>>> >>>>>>>>> >>>>> >>>>>>>>> >>>>> On Mon, Feb 8, 2021 at 1:53 PM Trevor Karn < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > Ah I see, thanks for explaining. >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > Here is my top-level config.log. >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > Best Regards, >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > Trevor Karn >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > On Mon, Feb 8, 2021 at 7:09 AM Dima Pasechnik < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> On Mon, 8 Feb 2021, 13:02 Trevor Karn, < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> Thanks for sending that link. I am confused though, >>>>>>>>> because it says a fix was issued. Does that mean it should work now? >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> sorry, I was not clear. What I meant to say that it >>>>>>>>> appears to be a well-known issue in the Python@macOS universe, >>>>>>>>> >>>>> >> and lately all seems to be OK with Sage. >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> To figure out exactly goes wrong in your case, we need to >>>>>>>>> know where Python3 used in Sage is coming from. >>>>>>>>> >>>>> >> Please post the top-level config.log >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> And yes, I am on the most recent develop branch >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> On Mon, Feb 8, 2021 at 5:42 AM Dima Pasechnik < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> >>>> >>>>>>>>> >>>>> >>>> This seems to be well-known issue, see e.g >>>>>>>>> >>>>> >>>> https://github.com/pypa/virtualenv/issues/2027 >>>>>>>>> >>>>> >>>> >>>>>>>>> >>>>> >>>> Are you on the most recent develop branch (9.3.beta7)? >>>>>>>>> >>>>> >>>> >>>>>>>>> >>>>> >>>> On Mon, Feb 8, 2021 at 9:20 AM Trevor Karn < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > Hi, >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > I'm trying to build Sage from the source code. I >>>>>>>>> cloned it from git, and tried to build from the develop branch using >>>>>>>>> make >>>>>>>>> from the sage directory. I ran into trouble building cython. The error >>>>>>>>> message suggested that I email this group. Does anyone have any >>>>>>>>> advice on >>>>>>>>> how to proceed? >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > I am using macOS Big Sur 11.2 on a MacBook Air. >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > The log file is attached, this is from a second run - >>>>>>>>> it failed once, and I tried running make a second time without any >>>>>>>>> changes >>>>>>>>> and this is the log from the second run, which returns the same error >>>>>>>>> just >>>>>>>>> without all of the info before it (eg. the flint installation). >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > Thanks so much. >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > Best, >>>>>>>>> >>>>> >>>> > Trevor >>>>>>>>> >>>>> >>>> > >>>>>>>>> >>>>> >>>> > -- >>>>>>>>> >>>>> >>>> > You received this message because you are subscribed >>>>>>>>> to the Google Groups "sage-devel" group. >>>>>>>>> >>>>> >>>> > To unsubscribe from this group and stop receiving >>>>>>>>> emails from it, send an email to [email protected]. >>>>>>>>> >>>>> >>>> > To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/1c93ec2e-86bd-45f0-bba0-cc254a392305n%40googlegroups.com >>>>>>>>> . >>>>>>>>> >>>>> >>>> >>>>>>>>> >>>>> >>>> -- >>>>>>>>> >>>>> >>>> You received this message because you are subscribed to >>>>>>>>> a topic in the Google Groups "sage-devel" group. >>>>>>>>> >>>>> >>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>>>> . >>>>>>>>> >>>>> >>>> To unsubscribe from this group and all its topics, send >>>>>>>>> an email to [email protected]. >>>>>>>>> >>>>> >>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAAWYfq3CFFAYzUtNnSrt_RPKW7X_p8j_VXGtZbKLWG%2BST%3DCO%2BQ%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> -- >>>>>>>>> >>>>> >>> Best, >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> Trevor >>>>>>>>> >>>>> >>> >>>>>>>>> >>>>> >>> -- >>>>>>>>> >>>>> >>> You received this message because you are subscribed to >>>>>>>>> the Google Groups "sage-devel" group. >>>>>>>>> >>>>> >>> To unsubscribe from this group and stop receiving emails >>>>>>>>> from it, send an email to [email protected]. >>>>>>>>> >>>>> >>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAJ6VCMAVGG57CHovd7zoXa0C3Nxsr3WfXi0FWwapKrDfup7_sA%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>>>> >> >>>>>>>>> >>>>> >> -- >>>>>>>>> >>>>> >> You received this message because you are subscribed to a >>>>>>>>> topic in the Google Groups "sage-devel" group. >>>>>>>>> >>>>> >> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>>>> . >>>>>>>>> >>>>> >> To unsubscribe from this group and all its topics, send >>>>>>>>> an email to [email protected]. >>>>>>>>> >>>>> >> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAAWYfq026cNP9FTmBySPskZZoc%2BH4ykTQO7je6TW4YTkirg_qw%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>>>> > >>>>>>>>> >>>>> > -- >>>>>>>>> >>>>> > You received this message because you are subscribed to >>>>>>>>> the Google Groups "sage-devel" group. >>>>>>>>> >>>>> > To unsubscribe from this group and stop receiving emails >>>>>>>>> from it, send an email to [email protected]. >>>>>>>>> >>>>> > To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAJ6VCMDJEN7KzDmvB0x0GDrXiQrK3F_e_eBZvSJf-JxVre0n-Q%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>>>> >>>>>>>>> >>>>> -- >>>>>>>>> >>>>> You received this message because you are subscribed to a >>>>>>>>> topic in the Google Groups "sage-devel" group. >>>>>>>>> >>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>>>> . >>>>>>>>> >>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>> email to [email protected]. >>>>>>>>> >>>>> >>>>>>>>> >>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAAWYfq3meWN5AWip9BG5GzJ%3DFfLvoHKFrpS6Ezmq4X2GWH8mQw%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>> >>>>>>>>> >>> -- >>>>>>>>> >>> You received this message because you are subscribed to a >>>>>>>>> topic in the Google Groups "sage-devel" group. >>>>>>>>> >>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>>>> . >>>>>>>>> >>> To unsubscribe from this group and all its topics, send an >>>>>>>>> email to [email protected]. >>>>>>>>> >>> >>>>>>>>> >>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/c02796d9-9057-41e2-829f-eeb933132d42n%40googlegroups.com >>>>>>>>> . >>>>>>>>> > >>>>>>>>> > -- >>>>>>>>> > You received this message because you are subscribed to the >>>>>>>>> Google Groups "sage-devel" group. >>>>>>>>> > To unsubscribe from this group and stop receiving emails from >>>>>>>>> it, send an email to [email protected]. >>>>>>>>> >>>>>>>> > To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/bd636baa-f6b1-42f7-866b-77ba0af40b6en%40googlegroups.com >>>>>>>>> . >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "sage-devel" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>>>> . >>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>> to [email protected]. >>>>>>>>> >>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/sage-devel/CAAWYfq08zf6vp0LfT%2BGfAy25ML95cxTyxAQho9gB_UdGjqpHFA%40mail.gmail.com >>>>>>>>> . >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "sage-devel" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> >>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/sage-devel/c6d5aec3-7f1c-4dc7-a94b-d1e2ab5fdf53n%40googlegroups.com >>>>>>> <https://groups.google.com/d/msgid/sage-devel/c6d5aec3-7f1c-4dc7-a94b-d1e2ab5fdf53n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- >>>>>> Best, >>>>>> >>>>>> Trevor >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "sage-devel" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> >>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/sage-devel/47b9954f-e37a-4a81-a7f4-7747b8139e5an%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/sage-devel/47b9954f-e37a-4a81-a7f4-7747b8139e5an%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "sage-devel" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/sage-devel/415b45c0-6ee0-41bf-ab36-0a82153fd66fn%40googlegroups.com >>> <https://groups.google.com/d/msgid/sage-devel/415b45c0-6ee0-41bf-ab36-0a82153fd66fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to a topic in the > Google Groups "sage-devel" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/sage-devel/TmbLnmwz2mg/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-devel/aafdb9d9-fdc8-4761-864d-051ee78536b3n%40googlegroups.com > <https://groups.google.com/d/msgid/sage-devel/aafdb9d9-fdc8-4761-864d-051ee78536b3n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/CAJ6VCMBOUdVE-LhdEZTxxkjT%3DOTPk9eHuX537hmO%3Dx9MRzKR1Q%40mail.gmail.com.
