wcndave wrote:
>
> However, when I come back more than about 12 hours later, the whole
> thing is not responsive and requires a reboot, and as this is PoE, that
> means going to my switch in basement.
> Also, the screensaver settings are all lost, so I have to set them all
> over again...
>
>
For the settings on reboot
there is a menu item in the pCP specific
part of Jivelite to make a backup - because pCP avoids writing to
storage unless told to do it.
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzf
So I have been using LMS for nearly 20 years now, and then went to
Joggler devices to replace old Logitech Touch devices, and recently
tried Volumio as a "modern" replacement.
However, it's multi-room doesn't work, and spotify is broken... but then
my jogglers all stopped working (contact me if y
carsten_h wrote:
> I think you can take a look at this project:
> https://docs.picoreplayer.org/projects/autostart-squeezelite-from-usb-dac/
>
> There has to be also a thread inside the forum, but I didnt found it.I
> wasn't sure if that applied to this issue. Everything works except
alsa volu
paul- wrote:
> Are you using the USB reset scripts? Are you sure the restarted
> instance of squeezelite is getting the -V option?I don't know what the USB
> reset scripts are. The restarted instance has
the -V option as I can control the alsa volume.
Sent from my Pixel 3a using Tapatalk
slartibartfast wrote:
> OK LMS stops controlling alsa volume after the E30 DAC has been in
> standby mode. After coming out of standby mode I can play music but
> cannot control alsa volume until I restart Squeezelite.
>
> Sent from my Pixel 3a using Tapatalk
Are you using the USB reset script
slartibartfast wrote:
> After coming out of standby mode I can play music but cannot control
> alsa volume until I restart Squeezelite.
I think you can take a look at this project:
https://docs.picoreplayer.org/projects/autostart-squeezelite-from-usb-dac/
There has to be also a thread inside th
slartibartfast wrote:
> I mentioned this in another post. After setting alsa volume control with
> the -V option I find that LMS doesn't control the volume after a period
> of time. Restarting Squeezelite restores volume control. I first noticed
> it yesterday and again today. What could cause t
I mentioned this in another post. After setting alsa volume control with
the -V option I find that LMS doesn't control the volume after a period
of time. Restarting Squeezelite restores volume control. I first noticed
it yesterday and again today. What could cause that?
Sent from my Pixel 3a usi
You can also enable SAMBA server on pCP so that you can copy files to it
from Windows (or other things that can use SMB protocol).
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cb
coyrls wrote:
> Try putting a backslash "", in front of "(" and ")". If that doesn't
> work, try a double backslash!
Nah, didn't let me do that. Tried single quotes, double quotes as well.
No luck.
garym wrote:
> I'm sure you have a reason for this approach that I'm simply not
> thinking ab
I'm sure you have a reason for this approach that I'm simply not
thinking about, but my first thought was why not avoid all this and plug
the USB drive directly into the rPi and mount from there instead of the
router. That's what many piCorePlayer users do.
*Home:* Pi4B-8GB/pCP8.3.x/4TB>LMS 8.
Try putting a backslash "\", in front of "(" and ")".
coyrls's Profile: http://forums.slimdevices.com/member.php?userid=44253
View this thread: http://forums.slimdevices.com/showthread.php?t=114828
___
Hi all,
I've been using piCorePlayer for a while now with a USB flashdrive
plugged into my router as my main source of music. Took me a bit of
trial and error but eventually worked out the right settings to mount
the USB using CIF. Worked like a charm - nice cheap, super responsive
NAS!! :-)
kidstypike wrote:
> What do you mean by "does not work"? The needles don't move?
Yes the needles do not move.
>
> The VU meters only work if you are controlling the squeezelite instance
> on the Pi running Jivelite, they won't work if you're controlling
> another player. Although you could syn
nupi wrote:
> Thanks! :)
>
> Everything seems to work except for the VU meter. I can see the VU
> meter. But it does not work. Strange. That would be nice if it would
> work. But it's nothing really important.
What do you mean by "does not work"? The needles don't move?
The VU meters only wor
Thanks! :)
Everything seems to work except for the VU meter. I can see the VU
meter. But it does not work. Strange. That would be nice if it would
work. But it's nothing really important.
nupi's Profile: http://forums.sli
mr-b wrote:
> Tx. I'm wary of adding things that would reduce reliability - that's
> what I'm trying to solve!
> What kinds of things might it break? I'm not hacking or trying to turn
> PCP into a Swiss army knife, just trying to make it easier to diagnose
> messages.
util-linux.tcz contains a
pCP is running in RAM, you need to backup changes. There is a backup
option in the pCP menu on Jivelite. Or do it from the pCP web
interface.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate' (https://picoreplayer.org/index.ht
nupi wrote:
>
> And even worse. At every restart/reboot comes the settings menu with
> language and skin. How do I get this to go away?
Tell Jivelite to save its settings.
>From memory it is in the pCP section of the settings in Jivelite UI
itself.
Paul Webster
author of \"now playing\" plu
nupi wrote:
> Now with HiFiBerry Digi2 Pro it is working.
>
> I didn't know there was a vumeter.
> In PiCorePlayer itself it was missing under settings. Only when I
> clicked on Download in the browser under Tweaks, Jivelite Setup, the Vu
> Meter appeared in the PiCorePlayer.
>
> Unfortunately
nupi wrote:
>
> In that case I will have to buy HiFiBerry Digi2 Pro.
Now with HiFiBerry Digi2 Pro it is working.
I didn't know there was a vumeter.
In PiCorePlayer itself it was missing under settings. Only when I
clicked on Download in the browser under Tweaks, Jivelite Setup, the Vu
Meter a
Hi Michael, Paul, thanks for your answers!
mherger wrote:
> Why would you want to run rustc on pCP? You can run it on any "full
> blown" OS, or even cross-compile for the Pi - it might be worlds faster,
> too.
Very good point, actually! I was expecting this kind of feedback,
though.
And the sim
There is a bash script in this answer that might you ... apart from pCP
not using bash ...
https://stackoverflow.com/questions/13890789/how-do-i-convert-dmesg-timestamp-to-custom-date-format
You might be able to convert it to ash (which I think is the pCP
default)
Paul Webster
author of \"now
Tx. I'm wary of adding things that would reduce reliability - that's
what I'm trying to solve!
What kinds of things might it break? I'm not hacking or trying to turn
PCP into a Swiss army knife, just trying to make it easier to diagnose
messages.
Install util-linux.tcz
/usr/local/bin/dmesg -T
WARNING: There is a chance that loading util-linux.tcz may break
something else. When we initially wrote piCorePlayer, we didn't
anticipate users replacing busybox commands.
Hi
Is there any way that the Diagnostics page 'dmesg' section could be
converted to human readable time? I find trying to diagnose various
things very difficult when I've no idea when they happened.
I tried the CLI and thought I'd found an option to do it but it doesn't
work.
$ sudo dmesg -T
dm
In general, pCP was never intended to be a development platform. I was
tinkering with rust while trying to get firefox to run on pCP. The
binaries on our repo are not complete(I need to remove them) Remove it
completely, then if you want, install from the tinycore repo.
piCorePlayer a smal
I would need libLLVM-13.so on my piCorePlayer in order to run rustc:
Why would you want to run rustc on pCP? You can run it on any "full
blown" OS, or even cross-compile for the Pi - it might be worlds faster,
too. It's what I'm doing for the Spotty helper application. I even use a
Github wor
Hi,
I would need libLLVM-13.so on my piCorePlayer in order to run rustc:
rustc: error while loading shared libraries: libLLVM-13.so:
cannot open shared object file: No such file or directory
I have seen the "piCorePlayer main repository" contains version 10 of
llvmlib.tcz whereas the "Officia
Thank you. I already suspected that.
In that case I will have to buy HiFiBerry Digi2 Pro.
nupi's Profile: http://forums.slimdevices.com/member.php?userid=73244
View this thread: http://forums.slimdevices.com/showthread.ph
In the past I have left those 2 lines in place and still used HDMI, but
that was with KMS not FKMS.
I read a description of them that said that they use HDMI ARC (Audio
Return Channel) ... if that is the only way that they work then they
might not work at all when directly connected to Raspberry
Paul Webster wrote:
> You don’t say what you tried but have a go with
Thanks. I tried various Outpout settings.
Paul Webster wrote:
>
> plughw:CARD=b1,DEV=0
> however, to me that looks like it might be the 2nd HDMI port on RPi4
I tried that too. Most of the time I used the first HDMI port. But
nupi wrote:
> Where do you make these settings?
>
> Edit: I think I get it. But unfortunately without any success.
>
>
> [ INFO ] Squeezelite Output devices
> >
Code:
> >
> Output devices:
> null - Discard all samples (playback) or gener
AnaximanderThales wrote:
> Ssh'd in again and went through the available outputs (hw:card=b1,
> plughw:card, sysdefault:card) via cli. plughw worked and I entered that
> setting into pcp squeezelite output setting. Rebooted and now I have
> sound, and we have the 'needed' requirements resolved
paul- wrote:
> pCP8 with RPi 7" DSI or other DPI display + HDMI Audio
>
> So I've made some progress here, there is no one generic setting that
> works for all.
>
> You will need to edit the config.txt on the boot partition.
> > >
- Comment out or delete the line gpu_mem=xxx
- add a li
See piCorePlayer documentation:
- "'My changes disappeared'
(https://picoreplayer.gitlab.io/pCP-docs/faq/my_changes_disappeared/)".
- "'piCorePlayer backup'
(https://picoreplayer.gitlab.io/pCP-docs/information/pcp_backup/)".
- "'Creating a piCore extension'
(https://picoreplayer.gi
As happy new user of piCorePlayer I want to say it works amazingly.
Thanks a lot!
What I'm struggling with is Bluetooth dongle support as the internal
Bluetooth module of the Raspberry Pi performs really bad in terms of
coverage for me even with WiFi blocked. I have tried 7 different dongles
(fr
Thank you both. Ill play with cron a bit to see if that helps.
von-Ah's Profile: http://forums.slimdevices.com/member.php?userid=73100
View this thread: http://forums.slimdevices.com/showthread.php?t=114828
__
von-Ah wrote:
> Thanks for addressing my question, Paul. Could you please provide a
> little more context on your suggestion? What does set cron entail?
Cron is enabled on the tweaks page
.. if you only have one there, you
can enter the cron entry on the web page. The link provided above mig
von-Ah wrote:
> Thanks for addressing my question, Paul. Could you please provide a
> little more context on your suggestion? What does set cron entail?
Not Paul, but perhaps this links will help you get started. I am not
certain if the pCP implementation of cron matches this generic
descripti
paul- wrote:
> You could set cron on all of the devices to do that. The squeezelite
> script is in /usr/local/etc/init.d
Thanks for addressing my question, Paul. Could you please provide a
little more context on your suggestion? What does set cron entail?
--
I have this funny phenomenon, that sometimes after reboot, the
screensaver does not turn on after 30s to my "beloved" black digital
clock (black). Also switching to other "clocks" does not help them.
That would usually be the case when it didn't get valid time
information. This can happen when
I have this funny phenomenon, that sometimes after reboot, the
screensaver does not turn on after 30s to my "beloved" black digital
clock (black). Also switching to other "clocks" does not help them.
After a few days normally it suddenly works again (so after a few
restarts)
My 4 picore players
von-Ah wrote:
>
> I know there are tons of variables here, and I don't know if I'll find
> the root cause, so I want to ask: Is there a plugin or command string
> that I can use/write to restart all squeezelite players on the server at
> the same time?
You could set cron on all of the devices
Greg Erskine wrote:
> Is it a one wire device?
>
> Have you loaded the appropriate w1-.tcz extension?
The DHT11/DHT22 family are not one-wire devices. They can be
bit-banged, from either the kernel (if you have the drivers) or from
userspace.
Turns out doing it from userspace works just
Is it a one wire device?
Have you loaded the appropriate w1-.tcz extension?
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t
Thanks -- yes, I already have config.txt configured correctly, with:
"dtoverlay=dht11,gpiopin=24". There are no mentions of the overlay (or
the string "dht" in the kernel log.
But you did send me off to do more searching.
I've been assuming that I want to use the kernel driver for the DHT
dev
Use [Main Page] in [Beta] mode > [Extras] > "Overlays README" to confirm
DHT11 overlay is available and what params to use.
Add "dtoverlay=dht11,xxx" to config.txt--see "'Edit config.txt'
(https://picoreplayer.gitlab.io/pCP-docs/how-to/edit_config_txt/)"
Reboot and check for messages in dmesg,
I'm having a surprising amount of trouble finding the (presumably!)
pre-built dht11 and industrialio kernel modules, which are needed for a
DHT22 temperature sensor I'd like to add to one of my pCP boards.
The DHT11 is supported by a dtoverlay, so I'd be surprised if the
driver's dependencies w
I have four pcP players going at the same time. One has LMS and
squeezelite active. I use the Group plugin to keep them synced.
After the music has been paused or inactive for a while (undetermined
time), if I start playing something again, one or two of the players
will cause the sync to reset
bengaldave wrote:
>
>
> Just a note, it seems that you must disconnect the airplay first before
> you can start local play.
>
> Not a problem
Yes, only one audio program can use the audio hardware at a time.
Squeezelite has the -C option to release the hardware, and disconnecting
airplay sh
Hello,
Assuming that you wanted some feedback for the latest airplay, it
works!
Thanks for the work involved!
/home/tc$ /usr/local/sbin/shairport-sync -V
4.1.1-AirPlay2-libdaemon-OpenSSL-tinysvcmdns-ALSA-stdout-pipe-soxr-metadata-sysconfdir:/usr/local/etc
Just a note, it seems that you must
Hi, trying to do insitu uograde from 7.0.0 to 8.0.0 (or 8.1.0 / 8.2.0)
but I cannot download any install files. I can see similar problems
early in this thread with people who only run LMS and not Squeezelite
(which is my setup as well). But the suggested download of
cdrom-5.4.83-pcpCore-v7.tcz d
Version 1.9.9-1414 of the squeezelite extension is available via the
update button on the main page tab of the web admin.
I'd suggest using the Full Update button to ensure all the dependencies
are up to date as well.
r1414 includes a fix for gapless playback of ogg/vorbis and opus
file/stream
Version 4.1.1 is now available from the Shairport-sync option in the
Audio Tweaks section of the tweaks tab in the web admin, replacing the
old 3.3.8 build.
To update; select No and let pcp uninstall and reboot, then select Yes
and reboot again if prompted. You should now see a pCP-Airplay2 devi
Finally found the values to enter in the Network Disk Mount :) !
One issue remaining and we're good to go :p :
- When opening spotify on my phone, I cannot see Picoreplayer when
clicking on external devices
Any idea please? :)
--
kidstypike wrote:
> 39379
Thanks a lot ! I can now fill the fields!
Now I need to know what values to enter :D: confused:
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread: http:
kidstypike wrote:
> Did you install the "Extra file system support"? (At the bottom of your
> screenshot).
39379
+---+
|Filename: Add.jpg |
|Download: http://forums.slimdevices.com
sdiesel77 wrote:
> Thanks a lot Paul and Greg!
> The player is now working, I can listen to radios and spotty.
>
> Two remaining issues:
> - I can't setup my NAS library. All fields are grey..
> - When opening Spotify on my phone I can't see the Picoreplayer on
> remote device
>
> 39378
Did y
Paul Webster wrote:
> Deactivate it if you do not want a player on it.
> But it looks like you do since you were expecting to see it listed.
>
> If correct then enable Squeezelite.
>
> Next step the NAS
Thanks a lot Paul and Greg!
The player is now working, I can listen to radios and spotty.
Good news!
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=114828
___
unix mailing
I think I answered my own question, well, solved the problem, by just
doing a complete re-install from scratch. I think the LMS port setting
in one page was confused (by me in config) with the LMS port setting on
another setup page...
2 x Booms, 2 x Players, 2 x Touch, 4 x Joggler, LMS 7.7.6-
Deactivate it if you do not want a player on it.
But it looks like you do since you were expecting to see it listed.
If correct then enable Squeezelite.
Next step the NAS
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, sca
Greg Erskine wrote:
> Is squeezelite running?No, I followed the instructions on the slim device
> forum and it says to
deactivate it.
Sent from my SM-G986B using Tapatalk
sdiesel77's Profile: http://forums.slimdevices
Is squeezelite running?
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=114828
___
Hi All,
My Rpi4 with PCP7 just crashed yesterday and couldn't restore it so I
decided to download PCP8 and install it on my Rpi4 with Touchscreen.
And it's a nightmare since this morning I can't get it to work :(
I have installed PCP, then Jiveilte and LMS but here are the issues:
- When going i
on pCP ... Jivelite is a controller only (it is not SqueezePlay).
So having it runninf just gives you the ability to control things.
Perhaps your Squeezelite is not running.
What does it show on the pCP Squeezelite page.
Paul Webster
author of \"now playing\" plugins covering radio france (fi
I have a pi4 with picore installed, and it's showing all my players bar
the one that should be running on the pi.
So JiveLite must be ok, as it's connected to the LMS.
I can't see why on both the player and on the LMS, the player is not
showing up as a player
Any experience as to why this can
paul- wrote:
> I have not found a way to have two screens and HDMI audio working on
> pCP. For multiple screens, You probably need to be running an Xorg
> solution.
Okay. I had come across multiple tutorials on setting up
squeezelite/jivelight on raspian. I've heard it's not quite the same
AnaximanderThales wrote:
>
>
> I have not found a way to have two screens and HDMI audio working on
> pCP. For multiple screens, You probably need to be running an Xorg
> solution.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'do
There may (or not) be some useful info in this project "'Raspberry Pi
Zero W with HDMI TV and Jivelite'
(https://docs.picoreplayer.org/projects/rpi0w-hdmitv-jivelite/)".
I have never tried TV and 7" screen output at once.
paul- wrote:
> So I re-read my post here
> https://forums.slimdevices.com/showthread.php?114828-Announce-piCorePlayer-8-0-0&p=1029240&viewfull=1#post1029240
> I think when I did this test, I did not use the vc4-kms-v3d driver. I
> made only the changes listed in the post, and then used the con
AnaximanderThales wrote:
>
> On to what I have tried:
> I have tried both 32- and 64-bit versions.
> I have set SqueezeLite for HDMI Audio (as well as Headphones and None
> just to be thorough)
> I have added dtparam=vc4-kms-v3d, as well as -fkms-
> I have removed gpu_mem OR left it in place
>
Paul Webster wrote:
> Most internet radio stations are 44.1KHz (like a CD) some are 48KHz
> (like DAB radio - e.g. BBC).
> You can usually see what is playing via the "More" function in the web
> UI.
That's what I thought you were getting at. So, current song playing is
at 44.1 sample rate (fr
Most internet radio stations are 44.1KHz (like a CD) some are 48KHz
(like DAB radio - e.g. BBC).
You can usually see what is playing via the "More" function in the web
UI.
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala
Paul Webster wrote:
> Also ... try different sources including 48kHz and 44.1KHz
I thought I might be able to figure this one out, but having some
issues. Where do I need to do this?
AnaximanderThales's Profile:
http://
paul- wrote:
> That doesn't need to be in asound.conf. Alsa handles it directly.
Ahh! It has been a long while. Thank you.
AnaximanderThales's Profile:
http://forums.slimdevices.com/member.php?userid=73206
View this t
Paul Webster wrote:
> Try pushing the volume up in LMS and in the TV just in case that is the
> issue (it was for me once).
TV volume is sitting at 50, and the volume slider on the web interface
of LMS is maxed, and I can confirm that alsa volume is at fixed volume
(I assume that's default for H
AnaximanderThales wrote:
> Okay -- hdmi wasn't plugged in securely, so iec958:CARD=vc4hdmi,DEV=0
> does get squeezelite running, however still no sound.
>
> Examining the /etc/asound.conf (in diagnostics) there is no vc4hdmi,
> just headphones:
> >
Code:
> >
> # def
Also ... try different sources including 48kHz and 44.1KHz
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cbc/radio-canada
and, via the extra \"radio now playing\" plugin lots more
Try pushing the volume up in LMS and in the TV just in case that is the
issue (it was for me once).
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cbc/radio-canada
and, via the ext
Okay -- hdmi wasn't plugged in securely, so iec958:CARD=vc4hdmi,DEV=0
does get squeezelite running, however still no sound.
Examining the /etc/asound.conf (in diagnostics) there is no vc4hdmi,
just headphones:
Code:
# default - Generated by piCorePlayer
pcm.!defaul
Paul Webster wrote:
> In the pCP web page ... the section headed "Change Squeezelite settings"
> has "Squeezelite command string" at the bottom ... with a "more" link.
> Click "more" and you will see the command line that pCP is using.
> From ssh session ... run the same command and capture the
In the pCP web page ... the section headed "Change Squeezelite settings"
has "Squeezelite command string" at the bottom ... with a "more" link.
Click "more" and you will see the command line that pCP is using.
>From ssh session ... run the same command and capture the output (as
text not as an im
Paul Webster wrote:
> If the device was listed when clicking more in pCP web interface then
> it really should have been OK for Squeezelite- at least to run.
>
> You could try running Squeezelite from the command line (pCP can be
> coaxed to show you what it is using) and then you might see a
If the device was listed when clicking more in pCP web interface then
it really should have been OK for Squeezelite- at least to run.
You could try running Squeezelite from the command line (pCP can be
coaxed to show you what it is using) and then you might see a more
specific error message at
Paul Webster wrote:
> On pCP 8 - with KMS - set the Squeezelite output to go to the IEC device
> to get audio on HDMI.
I believe that you are replying to me -- I did accidentally leave that
out. I have tried all of the vc4hdmi outputs:
IEC958, Default, Card, etc. All of those leaves Squeezebo
On pCP 8 - with KMS - set the Squeezelite output to go to the IEC device
to get audio on HDMI.
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc
australia and cbc/radio-canada
and, via the extra \"
I had pCP setup before this, I am pretty sure it was pCP7, but I did not
keep a backup to verify that. When this worked, the album info
displayed on the 7" screen, and the rainbow test screen would display on
the TV (assuming it was on).
The hardware is rPi 3B v1.2. Despite all the documentati
The AMP3 uses a Merus DAC/Amp
If that output doesn't yield any result, then I would load HifiBerryOS
and see what happens.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate' (https://picoreplayer.org/index.html#donate) if you like
Paul Webster wrote:
> On the pCP Squeezelite page ... click "more" for the field "Output
> setting".
> If the overlay worked then you should see some suitable device listed
> there ... click some and try.
Not sure if the overlay worked. The list of output devices appears to be
standard list (Se
On the pCP Squeezelite page ... click "more" for the field "Output
setting".
If the overlay worked then you should see some suitable device listed
there ... click some and try.
Paul Webster
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute,
paul- wrote:
> We will have to add that in a future release. In the meantime you
> should be able to just edit the config.txt on your boot disk and add
>
>
> dtoverlay=hifiberry-amp3
I added dtoverlay=hifiberry-amp3 to conifg.txt, and verified that it
exists on the diagnostics page. Squeeze
paul- wrote:
> We will have to add that in a future release. In the meantime you
> should be able to just edit the config.txt on your boot disk and add
>
>
> dtoverlay=hifiberry-amp3
Fantastic news. Ill do that & report back. Thanks Paul
---
We will have to add that in a future release. In the meantime you
should be able to just edit the config.txt on your boot disk and add
dtoverlay=hifiberry-amp3
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate' (https://picorep
Hi,
Would it be possible to add support for hifiberry amp3? I tried a fresh
install of 8.2 and selected Hifiberry DAC+ (and Pro, AMP2) but
squeezelite failed to launch.
Happy to run any diagnostics or tests to support this. Thanks
--
slartibartfast wrote:
> Have you tried updating from 8.1 to 8.2?
>
> Sent from my Pixel 3a using Tapatalk
I did, confirmed in post #1195.
Bagwit's Profile: http://forums.slimdevices.com/member.php?userid=73188
View this
Viota wrote:
> Did this update happen as I too need NVME SSD support? I have 32 bit
> piCorePlayer (Player and Server) booting and running from NVMe SSD on
> CM4 Lite module but unclear how to mount a MUSIC folder or copy my music
> library over to the NVME? Would appreciate some guidance. Many
paul- wrote:
> I'll have to make that update. I'm looking to do a web page update
> soon. I'll post when I do
Did this update happen as I too need NVME SSD support? I have 32 bit
piCorePlayer (Player and Server) booting and running from NVMe SSD on
CM4 Lite module but unclear how to mount a M
1 - 100 of 1009 matches
Mail list logo