Upload the iso to one of the data domains you use for your VMs.
-Original Message-
From: Mikhail Po
Sent: Tuesday, August 29, 2023 12:22 AM
To: users@ovirt.org
Subject: [ovirt-users] Re: Separate NFS Domain Storage for each Domain Storage
For the initial installation of the operating
I'm not sure what you mean by your "example", nor why you would need a
dedicated ISO Storage Domain, when that practice was ended a while ago.
I have several "datacenters", all using iSCSI and FC SAN storage, but I keep an
NFS storage domain available to copy ISO's and templates, and to move VMs
You allocated a 100G storage domain.
Within that storage domain, you allocated a 50G disk to hold the disk image.
Just like any other storage domain, you can create additional disks. I have
seen warnings, for going over 80% allocated within this storage domain.
When building the Self-Hosted-En
GB and
I can't increase it...
Em qui., 29 de dez. de 2022 às 18:53,
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com>
mailto:matthew.st...@fujitsu.com>> escreveu:
If you used the default image for your self-hosted-engine, it will create the
disk of the size you spec
he disk is only 58GB and
I can't increase it...
Em qui., 29 de dez. de 2022 às 18:53,
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com>
mailto:matthew.st...@fujitsu.com>> escreveu:
If you used the default image for your self-hosted-engine, it will create the
disk
If you used the default image for your self-hosted-engine, it will create the
disk of the size you specified, (50GB) but only allocate the space it actually
requires.
This means the remaining space on the allocated disk, is there, unused.
Since it setup with LVM, you can use 'fdisk' to creat
Elrepo also has packages for the drivers that RedHat decided to remove.
Of course, you could just purchase some supported Network Interface Cards.
-Original Message-
From: Darrell Budic
Sent: Monday, December 19, 2022 5:41 PM
To: parallax
Cc: users
Subject: [ovirt-users] Re: ovirt nod
Scratch this query. It appears we had two identical images. It wouldn't
permit importing due to matching disk id's.
From: matthew.st...@fujitsu.com
Sent: Saturday, December 10, 2022 10:24 PM
To: users@ovirt.org
Subject: [ovirt-users] Recombining disks under a single VM
Up until
the other drive as an un-importable VM on
the NFS storage partition, mounted on datacenter TWO.
Any hints on how I "merge" these two, back into one function VM?
== matthew.st...@fujitsu.com
___
Users mailing list -- users@ovirt.org
To unsubscr
Assuming your are using SAN or NAS storage, have you considered just collapsing
everything into the Default cluster?
-Original Message-
From: murat.cel...@dbpro.com.tr
Sent: Wednesday, August 31, 2022 9:41 AM
To: users@ovirt.org
Subject: [ovirt-users] Moving SelfHosted Engine
Hello
We
Deleted some files to "clean up" /var/log, but the space was not recovered?
Space for deleted files are only recovered when all references to that space
are removed. This includes the directory reference, and any open file-handles
to the file.
The is a popular trick for a self-deleting scratc
I’ve always been told that migrating self-hosted-engine storage was a backup,
shutdown, and rebuild from backup procedure.
In my iscsi environment it has never worked. (More due to the history of my
environment, than the procedure itself.)
Since we have too many hosts in a datacenter, we’ve ch
iSCSI environment.
-Original Message-
From: Abe E
Sent: Saturday, February 19, 2022 2:09 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: ovirtmgmt VLAN and IP Change
How did you do this if the host had a gluster volume on it though? Mine does
not let me remove due to that.
__
I had to do this for a number of hosts last year.
I put the host into maintenance, and then removed it.
I used 'nmtui' to change the hostname. (Changing hostname suffix from two
digits to three digits) (Probably could have used hostnamectl)
I change directory to /var/lib/vdsm/persistence/net
I'm planning a re-organization of my oVirt environment.
I need a Postgres command-line to dump a listing of VMs/disks/storage_domains.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: http
My understanding, is that OLVM/oVirt use the root password to push it's SSH
credentials at first login. Once that is done, all other SSH access is though
those credentials.
You should be able to change the root password without issue.
From: Tommy Sway
Sent: Friday, September 17, 2021 4:12 AM
eads_as_cores" does not exist"
message:"pq: column "count_threads_as_cores" does not exist"
Many of the other reports worked fine, with only a few similar errors.
Is this caused by version incompatibility?
After all, 4.4 in the original document was replaced with 4.3 before
One path per controller though its own switch is usually enough.
I install multiple links between storage and switches, to increase the
bandwidth of that link. But I've never done that between switches and hosts.
Link A from host to Switch A to Storage Controller A
Link B from host to Switch B
The instructions to modify the json files are missing. (Using find and sed to
change all instances of v4_4_ to v4_3_ before importing them into Grafana)
This is from an Oracle Blog on the doing this with OLVM 4.3 (which is basically
a repackaged oVirt 4.3)
Build Grafana Dashboard for Oracle Lin
release42
yum install
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.0-1.el7.noarch.rpm
On 7/8/21 8:41 PM, matthew.st...@fujitsu.com wrote:
> If the hardware is old, and won't support EL8, the best option is to update
> to oVirt 4.3.10 and update CentO
Some of my systems have megaraid sas2 raid controllers, which Red Hat have
stopped supporting "under EL8", and all the variants have followed suit.
-Original Message-----
From: matthew.st...@fujitsu.com
Sent: Thursday, July 8, 2021 12:42 PM
To: Andrei Verovski ; users@ovirt.o
If the hardware is old, and won't support EL8, the best option is to update to
oVirt 4.3.10 and update CentOS to 7u9.
Some of my systems have megaraid sas2 raid controllers, which Red Hat have
stopped supporting, and all the variant have followed suit.
I have tried the Elrepo DUD's to work arou
Found the answer:
Update /var/lib/vdsm/persistence/netconf/nets/ovritmgmt and reboot.
From: matthew.st...@fujitsu.com
Sent: Monday, May 10, 2021 3:18 PM
To: users@ovirt.org
Subject: [ovirt-users] Changing the ovirtmgmt IP address
Version: 4.3.10
I'm attempting to change the IP ad
Version: 4.3.10
I'm attempting to change the IP address, netmask and gateway of the ovirtmgmt
NIC of a host, but everytime I reboot the host, the old address/netmask/gateway
re-assert themselves.
Where do I need to make the changes, so they will be permanent?
I've modified /etc/sysconfig/netwo
Appliance hosted-engine on block storage (fc,iscsi). Have you checked that you
are not wasting space on the disk itself?
When I setup my hosted-engine, I created a 100GB lun, and told the setup
routine to make a 85GB disk, which it did, however the appliance only used 30GB
of that, leaving 55G
If you assigned the network to the cluster, they should be available in the new
VM dialog, once you selected the cluster.
-Original Message-
From: Miguel Garcia
Sent: Thursday, April 29, 2021 1:28 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: Unable to provide network acces to secon
Compute > Clusters > "Name" > Logical Network > Manage Networks
-Original Message-
From: Miguel Garcia
Sent: Wednesday, April 28, 2021 12:20 PM
To: users@ovirt.org
Subject: [ovirt-users] Unable to provide network acces to second cluster in DC
I have created the following DC and cluster
entry in [virtualmachines:vars] with the value of 2
(default is 1) and then in the other classes, I assigned a value of 3.
Now the variable in [class:vars] will override the variables in
[virtualmachines:vars]. Of course the host level can still override all.
From: matthew.st...@fujitsu.com
tenance. I then undeployed it; then patched it; and
finally deployed it.
Its back up and running and taking VMs, and no more 'Duplicate keys' errors.
-Original Message-----
From: matthew.st...@fujitsu.com
Sent: Monday, April 26, 2021 7:18 PM
To: Nir Soffer
Cc: users@ovirt.org
S
__:312)
-Original Message-
From: Nir Soffer
Sent: Monday, April 26, 2021 5:12 PM
To: Stier, Matthew
Cc: Benny Zlotnik ; users@ovirt.org
Subject: Re: [ovirt-users] Re: Attempting to detach a storage domain
On Tue, Apr 27, 2021 at 12:48 AM matthew.st...@fujitsu.com
ew
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Attempting to detach a storage domain
I think engine.log would be a good place to start, it would likely tell us on
which host there's a problem (if there is one)
On Sun, Apr 25, 2021 at 10:22 AM matthew.st...@fujitsu.com
wrote:
>
>
] Attempting to detach a storage domain
What do the logs say?
This usually means that not all hosts were able to disconnect from it
On Sun, Apr 25, 2021 at 9:45 AM matthew.st...@fujitsu.com
wrote:
>
> Ovirt: 4.3.10
>
> Storage: iSCSI
>
>
>
> Problem: Attempting to place storage doma
Ovirt: 4.3.10
Storage: iSCSI
Problem: Attempting to place storage domain into 'maintenance' in preparation
for detachment and destruction, has left it hung in a 'Preparation for
maintenance' state.
I have three storage domain I need to put into maintenance, detach and delete.
When I placed pl
ovirt_vm module from oVirt Ansible Collection which
contains newer versions than the ovirt_vm module included in Ansible 2.9?
https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_vm_module.html
Thanks,
Martin
On Thu, Apr 22, 2021 at 9:28 AM
matthew.st...@fujitsu.com
The 'nics' section of ovirt_vm is vague and with nearly no examples.
My playbook is based upon
https://blogs.oracle.com/scoter/ansible-with-oracle-linux-virtualization-manager-olvm
I've made several modifications, (more default) and added a few lines, which I
believe is supposed to assign vnic
If you destroyed, no.
To migrate the storage, intact, you need to shutdown the VMs, place the storage
domain into maintenance, then detach, and remove the storage domain. And then
do an attach on the new DC.
I've been doing this iSCSI to migrate VMs from an existing DC to a new DC to
alleviat
Disks + Linux + iSCSI target (Need I say more)
-Original Message-
From: Chris Adams
Sent: Wednesday, February 17, 2021 12:26 PM
To: users@ovirt.org
Subject: [ovirt-users] Small SAN suggestions?
I have an oVirt cluster with a significantly oversized SAN for storage (iSCSI,
have 30TB s
I'm running OLVM 4.3.6 (Consider it oVIrt 4.3.6).
When I created my second cluster, I could not access the hosts on the second
cluster using VNC (haven't tried to get html5 working).
Since I was forced to power off everything, (power outage), I've had no issue
with accessing the console on any
9, 2021 at 3:42 PM
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com>
mailto:matthew.st...@fujitsu.com>> wrote:
Elrepo.org
From: Shantur Rathore mailto:rathor...@gmail.com>>
Sent: Tuesday, February 9, 2021 9:28 AM
To: users mailto:users@ovirt.org>>
Subject: [ovirt
Over this weekend, I need to shutdown and restart 1500 VMs while I do work.
Modifying an Ansible playbook I have, to accomplish that, seems easy enough.
Last weekend I used the web gui and edited each Virtual Machine and changed the
'cluster' to the one I wanted to assign it too. Now I would l
gt; [root@ohost1 ~]# firewall-cmd --list-all public (active)
> target: default
> icmp-block-inversion: no
> interfaces: bond0 ovirtmgmt
> sources:
> services: cockpit dhcpv6-client libvirt-tls ovirt-imageio ovirt-
> vmconsole snmp ssh vdsm
> ports: 22/tcp 6081/udp
&
k with new cluster.
Did you shut down the vm's and start them up on the new cluster? It sounds like
they are associated with the default still and that's where virt viewer is
looking for them..
Eric Evans
Digital Data Services LLC.
304.660.9080
-Original Message-----
From: matth
Sounds like it, but VMs are running on the same network, with the same IP
address. The only firewall involved are on the hosts, and they are both
firewalld, and have the same ports and service permitted.
-Original Message-
From: Strahil Nikolov
Sent: Sunday, January 10, 2021 10:57 PM
Is it possible to break up an oVirt cluster into multiple clusters?
I have an Oracle Linux Virtualization Manager 4.3.6 cluster (think oVirt 4.3.6)
that is hosting four different classes of VM's.
I have acquired some additional hosts, and instead of adding them to my
"default" cluster, I want t
Nothing much really. It is two ways to get to the same result.
Use a CentOS minimal OS install, plus the oVirt packages from the repository.
Or an oVirt Node ISO with all of the necessary package included. Patchable and
upgradable from the respective repositories.
From: tommy
Sent: Monday, D
Define ‘proxy’ with /etc/yum.conf.
From: Simon Coter
Sent: Tuesday, November 10, 2020 9:59 AM
To: Matteo Bonardi
Cc: Strahil Nikolov ; users
Subject: [ovirt-users] Re: Deploy oVirt Engine fail behind proxy
Hi Matteo,
this one is the solution we’ve applied on OLVM that should also work for oVi
I had a need for this on one of my clusters. Spun up a VM to host, installed
and configured the software.
-Original Message-
From: yam yam
Sent: Tuesday, November 10, 2020 12:08 AM
To: users@ovirt.org
Subject: [ovirt-users] Re: setting routing rules for guests?
Thanks for the reply!
I've migrated my iSCSI storage to a new array, and the only thing remaining is
to migrate the hosted-engine.
Any directions on how I should proceed. I understand that I will need to
back-up the existing, create a new hosted-engine on the new storage, specifying
the backup a reference.
I just
I'm running Oracle Linux Virtualization Manager 4.3.6 (ie oVirt 4.3.6) on
Oracle Linux 7u9 with their UEK6 kernel.
Only issue was with V2V migration (VMware to OLVM) and that was due to a
missing package (qemu-block-curl). [Pulling the missing package from Oracle's
developer repository, as i
oVirt 4.3.6
Attempted to build 10 VMs from a template, concurrently, and apparently
overloaded the 1GB link to the iSCSI storage. I now have four VMs hung in the
Locked connection on the display, and no means to cancel, remove them.
The all have 'Failed to complete VM creation.' log entri
To get a project going, I used an iSCSI SAN array of limited storage, while
waiting to obtain, and make operational another iSCSI SAN of considerably more
storage.
I've attached the new iSCSI array to my cluster of hosts, attached a number of
LUNs as additional storage domains, and move my coll
If you can’t go direct, how about round about, with an iSCSI gateway.
From: Jeremey Wise
Sent: Wednesday, September 30, 2020 11:33 PM
To: users
Subject: [ovirt-users] CEPH - Opinions and ROI
I have for many years used gluster because..well. 3 nodes.. and so long as I
can pull a drive out.. I
oVirt newbie starting with 4.4.2.
Any good documentation on setting up networking?
I want to bond my two network interfaces. The native interface will be uses
for management. All other traffic will be over tagged vlans.
___
Users mailing list -- use
It is being mounted under /rhev/data-center/mnt/ on the hosts, but is not
being self-hosted engine.
From: matthew.st...@fujitsu.com
Sent: Saturday, September 26, 2020 4:17 PM
To: Edward Berger
Cc: users@ovirt.org
Subject: [ovirt-users] Re: Populating ISO storage domain
I setup the folder and
domain
If its in an NFS folder, make sure the ownership is vdsm:kvm (36:36)
On Sat, Sep 26, 2020 at 2:57 PM
matthew.st...@fujitsu.com<mailto:matthew.st...@fujitsu.com>
mailto:matthew.st...@fujitsu.com>> wrote:
I’ve created and ISO storage domain, and placed ISO’s in the export path do
I've created and ISO storage domain, and placed ISO's in the export path do not
show up under Storage > Storage Domains > iso > images; nor as available images
which creating a new VM.
Haven't located method get them noticed. There is a greyed out 'scan disk'
option.
What is the proper metho
Got this fixed. Ignore.
From: matthew.st...@fujitsu.com
Sent: Saturday, September 26, 2020 1:39 PM
To: users@ovirt.org
Subject: [ovirt-users] Recreating ISO storage domain
I have created a three host oVirt cluster using 4.4.2.
I created an ISO storage domain to hold my collection of ISO
I have created a three host oVirt cluster using 4.4.2.
I created an ISO storage domain to hold my collection of ISO images, and then
decided to migrate it to a better location.
I placed the storage domain in maintenance mode, end then removed it.
When I when to recreate it add the new location,
58 matches
Mail list logo