Hello,
i have to create a new ovirt cluster with 3 node using gluster FS, which ovirt
version do you suggest ?
BTW: on ovirt.org it is not clear the actually status of version… stable,
testing, beta etc… i suggest a more clear page with the indication of version
status, link to release note an
On 17-1-2014 8:53, Gabi C wrote:
've been there! :-D
I mean exactly same issuse you had on Centos, I had on Fedora 19.
Did you disable selinux on nodes? 'cause that's what is causing SSh
connection closing
My setup:
1 engine on vmware - fedora 19, up-to-date
2 nodes on IBM x series 3650
Hi,
well the latest stable release is 3.3.2
3.3.3 is still in beta and 3.4 is in alpha.
HTH
Am 17.01.2014 09:21, schrieb tristan...@libero.it:
> Hello,
>
> i have to create a new ovirt cluster with 3 node using gluster FS, which
> ovirt
> version do you suggest ?
>
> BTW: on ovirt.org it is
Hi,
oVirt 3.3.3 beta has been released and is actually on QA.
We'll start composing oVirt 3.3.3 RC on 2014-01-21 12:00 UTC.
The bug tracker [1] shows no bugs blocking the release
The following is a list of the non-blocking bugs still open with target 3.3 -
3.3.3:
Whiteboard Bug ID Summary
Hi All,
I would like to see, in the webui, all VMs that have snapshots attached
to them but I'm not able to construct a search that will work. For one
thing there is no 'Snapshot' category so I think that it will be impossible.
The use case is that I would like to have a way to see, in the webu
well, I have to admit that it has been a while since I tried logging in
to a vm console from a Windows OS :)
Adding some people to this which I think can help more than me...
On 01/17/2014 12:58 AM, David Li wrote:
Well, it didn't even have any traces to tell me if it's installed. I am
suppos
On Jan 17, 2014, at 09:59 , Dafna Ron wrote:
> well, I have to admit that it has been a while since I tried logging in to a
> vm console from a Windows OS :)
> Adding some people to this which I think can help more than me...
>
>
> On 01/17/2014 12:58 AM, David Li wrote:
>> Well, it didn't ev
On 17-1-2014 1:58, David Li wrote:
Well, it didn't even have any traces to tell me if it's installed. I am
supposed to see these according to the instruction but none of them showed up.
* IE will prompt you with "This website wants to install the following add-on
SpiceX.cab... proceed
Hi,
oVirt 3.4.0 alpha has been released and is actually on QA.
An issue has been found in VDSM so we have updated the packages in alpha
repositories for Fedora.
We had an issue with nightly build for EL6 packages yesterday so EL6 repository
is not yet updated.
We'll try to sync it today, I'm sorr
Indeed,
Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by
adding physical volumes from your shared storage (The process is managed by
ovirt-engine, the actual actions on your storage are done by your host which
has VDSM installed on).
- Original Message -
F
Thanks Elad for explaining .
On Fri, Jan 17, 2014 at 2:55 PM, Elad Ben Aharon wrote:
> Indeed,
> Using ovirt-engine APIs you can edit your iSCSI storage domain and extend
> it by adding physical volumes from your shared storage (The process is
> managed by ovirt-engine, the actual actions on you
On Fri, Jan 17, 2014 at 10:25 AM, Elad Ben Aharon wrote:
> Indeed,
> Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it
> by adding physical volumes from your shared storage (The process is managed
> by ovirt-engine, the actual actions on your storage are done by your h
Cheers,
Andrew
From: Sandro Bonazzola
Sent: Friday, January 17, 2014 8:16 PM
To: arch, engine-devel, VDSM Project Development, users
Hi,
oVirt 3.4.0 alpha has been released and is actually on QA.
An issue has been found in VDSM so we have updated the packages in alpha
On Fri, Jan 17, 2014 at 08:25:05AM +0100, Gianluca Cecchi wrote:
> On Fri, Nov 29, 2013 at 11:48 AM, Dan Kenigsberg wrote:
> > On Fri, Nov 29, 2013 at 04:04:03PM +0530, Vijay Bellur wrote:
> >
> >>
> >> There are two ways in which GlusterFS can be used as a storage domain:
> >>
> >> a) Use gluster
On Fri, Jan 17, 2014 at 10:32 AM, Gianluca Cecchi wrote:
>
> I think one option should be to provide the user, if not already
> present/tested/supported, the opportunity to resize the LUN on storage
> array and then run a rescan from oVIrt to see the new size and use it
> without disruption of ser
On 01/17/2014 12:30 AM, i iordanov wrote:
> Hello,
>
> My apologies for cross-posting, but this discussion concerns both
> mailing lists, I think.
>
> In Opaque, I recently started setting the proxy property of SpiceSession
> from a console file, as is done in remote-viewer, in order to support
>
On 01/17/2014 12:55 PM, Gianluca Cecchi wrote:
On Fri, Nov 29, 2013 at 11:48 AM, Dan Kenigsberg wrote:
On Fri, Nov 29, 2013 at 04:04:03PM +0530, Vijay Bellur wrote:
There are two ways in which GlusterFS can be used as a storage domain:
a) Use gluster native/fuse access with POSIXFS
b) Use
Hi Joop,
1. I did disabled firewalld/iptbles on both nodes and engines.
2. Disabling selinux: when setting to permissive via /etc/selinux/config
(and of course unpersist/persist them -> /config/etc) doesn't work
( as write this I've just reboot one node with the above modification and
when
On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote:
>
> I think a this point it is safe to install.
>
>> If I can go, can I use
>> https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3-Beta/html/Installation_Guide/Installing_and_Configuring_the_History_Database.ht
Il 17/01/2014 11:40, Gianluca Cecchi ha scritto:
> On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote:
>
>>
>> I think a this point it is safe to install.
>>
>>> If I can go, can I use
>>> https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.3-Beta/html/Installatio
Hi,
my advice would be the following:
for "nodes" use either a "full"
minimal centos or fedora and install ovirt.org
repo on top of that.
then everything works.
the "node.isos" provided by ovirt are in pre-alpha
state to be honest.
sure you still have to disable selinux
(or better configure it
Gabi, why not share with us engine.log for your failure of adding the disk?
Yair
- Original Message -
> From: "Gabi C"
> To: "Will Dennis (Live.com)"
> Cc: users@ovirt.org
> Sent: Friday, January 17, 2014 9:53:55 AM
> Subject: Re: [Users] New user to oVirt, and I haz a sad so far...
>
Hey,
as many of you have noticed there wasn't any well working oVirt Node ISO
around for oVirt 3.3.
To get this ball rolling again I've put together a draft image of ALPHA
quality. It contains many fixes some of us have been working on over the
last weeks.
- Source & ISO -
To not drown Jenkins in
Thanks Sven!
On Fri, Jan 17, 2014 at 1:04 PM, Sven Kieske wrote:
> Hi,
>
> my advice would be the following:
>
> for "nodes" use either a "full"
> minimal centos or fedora and install ovirt.org
> repo on top of that.
>
> then everything works.
>
> the "node.isos" provided by ovirt are in pre-
On Fri, Jan 17, 2014 at 11:50 AM, Sandro Bonazzola wrote:
>
> This has been fixed yesterday http://gerrit.ovirt.org/#/c/23304/
>
Please note that at the end of the problem, only PostgreSQL database
has been restarted, while ovirt engine kept stopped as for the
requested input at the beginning o
Hey Will,
that was surely a bad start and we know about the state of Node.
Please take a look at this email
http://lists.ovirt.org/pipermail/node-devel/2014-January/000581.html
to see where you can find a draft image which should address some bugs.
- fabian
Am Donnerstag, den 16.01.2014, 23:08
Hi,
is it possible to get the vm events via any API/CLI?
I'm talking about the "events" tab which you can select
in webadmin when you selected a vm.
If this is possible, how can we get the data?
We could even write a vdsm hook, if necessary, but
would of course prefer REST-API.
Thanks.
--
Mit
I did a quick test with ovirt-shell:
# Query vm id:
[oVirt shell (connected)]# list vms --query "name=testvm"
id : 8b2ad3a2-9704-47e6-99f1-f196856d7bd5
name : plsweb02
[oVirt shell (connected)]#
# List events:
list events --kwargs "vm-id=a82874bb-152d-4efd-952b-3f3304af7bb3"
Un
Hi all,
We recently created a "fictitious" Bugzilla user who is the QE contact
for oVirt bugs - b...@ovirt.org
In Bugzilla, it is possible to get notifications of all changes to bugs
where this user is QE contact (which is usually all of them), by the
following procedure:
* Log into Bugzilla
* C
Il 15/01/2014 14:54, Sandro Bonazzola ha scritto:
> Il 15/01/2014 02:35, Andrew Lau ha scritto:
>> I guess I spoke too soon.. Although, it allowed me to complete the setup
>> prompts it now fails at "Misc Configuration"
>>
>> Error Logs:
>>
>> 2014-01-15 11:49:34 INFO
>> otopi.plugins.ovirt_hoste
Hi Will,
Great to see you on the users list! (well, not great to see the content,
but you know what I mean...)
On 01/17/2014 05:08 AM, Will Dennis (Live.com) wrote:
> So I have no idea on how to proceed now, and what methods I can use to try
> and debug the connectivity problem between the engine
Hi Juan!
I´ve read a post you made about packaging Remote-Viewer for OS X. I
tested extracting and running this[1] package on a 10.7.5 machine,
logging in to our webadmin portal with Firefox, clicking for console on
a VM, remote-viewer starts up but doesn´t seems to load the console.vv
file (the V
Hi,
this seems to work, but as far as I see
I just get the events from the last start of the vm
until now?
Can the time range or the number of reported events
be influenced in some way?
Additionally I didn't find this function in REST-API
yet. Maybe I'm looking in the wrong direction..
Am 17.01
Or to make it short:
If you are already logged into BZ
open:
https://bugzilla.redhat.com/userprefs.cgi?tab=email
and add:
Watch user list -> add "b...@ovirt.org"
Am 17.01.2014 14:54, schrieb Dave Neary:
> * Log into Bugzilla
> * Click on "Preferences"
> * Click on "Email Preferences"
> * At the b
On 01/17/2014 03:14 PM, Karli Sjöberg wrote:
> Hi Juan!
>
> I´ve read a post you made about packaging Remote-Viewer for OS X. I
> tested extracting and running this[1] package on a 10.7.5 machine,
> logging in to our webadmin portal with Firefox, clicking for console on
> a VM, remote-viewer start
Il 17/01/2014 10:16, Sandro Bonazzola ha scritto:
> Hi,
> oVirt 3.4.0 alpha has been released and is actually on QA.
> An issue has been found in VDSM so we have updated the packages in alpha
> repositories for Fedora.
> We had an issue with nightly build for EL6 packages yesterday so EL6
> repos
On Fri, 2014-01-17 at 15:39 +0100, Juan Hernandez wrote:
> On 01/17/2014 03:14 PM, Karli Sjöberg wrote:
> > Hi Juan!
> >
> > I´ve read a post you made about packaging Remote-Viewer for OS X. I
> > tested extracting and running this[1] package on a 10.7.5 machine,
> > logging in to our webadmin por
On 01/17/2014 10:56 AM, noc wrote:
Hi All,
I would like to see, in the webui, all VMs that have snapshots attached
to them but I'm not able to construct a search that will work. For one
thing there is no 'Snapshot' category so I think that it will be
impossible.
The use case is that I would like
I see a lot of threads about v2v pains (mostly from ESX?)
I'm interested to see if we can make this simpler/easier.
if you have experience with this, please describe the steps you are
using (also the source platform), and how you would like to see this
make simpler (I'm assuming that would sta
Hey,
On Fri, Jan 17, 2014 at 02:49:42PM +, Karli Sjöberg wrote:
> On Fri, 2014-01-17 at 15:39 +0100, Juan Hernandez wrote:
> > On 01/17/2014 03:14 PM, Karli Sjöberg wrote:
> > > Hi Juan!
> > >
> > > I´ve read a post you made about packaging Remote-Viewer for OS X. I
> > > tested extracting an
On 01/17/2014 03:22 PM, Itamar Heim wrote:
On 01/17/2014 02:24 AM, Dafna Ron wrote:
sounds like a very creative use for the provider 3.3 feature and I like
the way you think :)
basically, it will require installing an all-in-one openstack but if
downtime is such a big issue it could be a good s
On 01/17/2014 02:24 AM, Dafna Ron wrote:
sounds like a very creative use for the provider 3.3 feature and I like
the way you think :)
basically, it will require installing an all-in-one openstack but if
downtime is such a big issue it could be a good solution...
or just only glance, if no keys
Michal,
What's the most common tool people use to access oVirt VM consoles? Spice? VNC?
- Original Message -
> From: Michal Skrivanek
> To: David Li
> Cc: Meital Avital ; Einav Cohen ; Omer
> Frenkel ; "users@ovirt.org List" ;
> "d...@redhat.com Ron"
> Sent: Friday, January 17, 201
Hi
I am experiencing issues with manual VM migration. VM fails to migrate to
other node in the same Cluster. Here are some relevant engine.log entries:
ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-73) Rerun vm
a31cfd62-26fc-4396-8a83-1aed68c7fd39. Ca
Hi,
I myself have no experience with this so far, but I can quote "blaster"
from the ML:
Blaster wrote:
>I haven’t tried this yet, but if I had to move a VM from ESXi to oVirt
>this is how I would do it…
>(actually, this is how I did it with Windows 7 guests…)
>Shutdown guest on ESXi (or use Gh
Which error are you getting in the UI?
Can you please attach the full engine and vdsm logs?
Also, please check if there is a relevant error in /var/log/messages
- Original Message -
> From: "Edgars M."
> To: users@ovirt.org
> Sent: Friday, January 17, 2014 3:42:37 PM
> Subject: [Users
On Fri, Jan 17, 2014 at 4:19 PM, Itamar Heim wrote:
> I see a lot of threads about v2v pains (mostly from ESX?)
>
> I'm interested to see if we can make this simpler/easier.
hear hear!
>
> if you have experience with this, please describe the steps you are using
> (also the source platform),
Sou
Thanks, Joop, for the node platform best practices. I did turn selinux from
"enforcing" to "permissive", and then when I tried to ping the engine by
fqdn, I saw that DNS lookups were failing (even tho resolv.conf looked
correct.) Did a 'yum remove NetworkManager" and then fixed the
/etc/sysconfig/n
Non-operational means it's connected, but missing a cluster resource (can't
access a storage domain, or misses one of the network definitions the
cluster should have)
On Fri, Jan 17, 2014 at 9:55 AM, Will Dennis (Live.com) <
willardden...@live.com> wrote:
> Thanks, Joop, for the node platform be
> - Original Message -
> From: "Will Dennis (Live.com)"
> Sent: Friday, January 17, 2014 11:55:55 AM
>
>
>
> Thanks, Joop, for the node platform best practices… I did turn selinux from
> “enforcing” to “permissive”, and then when I tried to ping the engine by
> fqdn, I saw that DNS look
Aha!
"Host does not comply with the cluster Default networks, the
following networks are missing on host: 'ovirtmgmt' "
What must I do to correct this? I do not remember reading about having to do
something like this in the docs... Also, the node is on a different network
that the engine, not
go to the "Network Interface" sub-tab of that node and click the "Setup
Host Networks" button.
In the dialog that has opened, attach the 'ovirtmgmt' network from the
right-hand side of the dialog to one of your node's NICs on the left-hand
side by dragging that network onto the NIC.
click OK.
a
> Date: Fri, 17 Jan 2014 15:12:20 +0100
> From: dne...@redhat.com
> To: willardden...@live.com; users@ovirt.org
> Subject: Re: [Users] New user to oVirt, and I haz a sad so far...
>
> Hi Will,
>
> Great to see you on the users list! (well, not great to see the content,
> but you know what I mea
its obvious that something is bad with your repo.
can you please run:
yum repolist
and:
for f in `ls /etc/yum.repos.d/`; do cat /etc/yum.repos.d/$f; done
i'd check the centos repo, I use:
[BASE]
name=BASE
baseurl=http://mirror.centos.org/centos/6/os/x86_64/
gpgcheck=0
enabled=1
On Wed,
Uuup! :)
Thanks for your assistance, Einav!
Now onwards
> Date: Fri, 17 Jan 2014 12:18:30 -0500
> From: eco...@redhat.com
> To: willardden...@live.com
> CC: n...@nieuwland.nl; users@ovirt.org
> Subject: Re: [Users] New user to oVirt, and I haz a sad so
Docs should be updated with a warning then as to the "alpha" status of the
ovirt-node product... It was a huge time-sink for me.
- Will
-Original Message-
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Sven Kieske
Sent: Friday, January 17, 2014 6:05 AM
To: u
Hi,
On 01/17/2014 06:19 PM, Willard Dennis wrote:
>> I have had success setting up CentOS 6.5 minimal in nodes, configuring
>> network, and then adding the node through the management interface - the
>> Engine takes care of installing & configuring the nodes.
>>
>> Have you tried this?
>
> No, I
Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6
Assaf mentioned the following which is true.
You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then placeas many
VM, tagged networks as you'd like on the same NIC or bond.
I tried a few things and I haven't been abl
Hi,
Keep seeing this in my engine.log, any idea where does this come from?
"Failed to invoke scheduled method gluster_async_task_poll_event:
java.lang.reflect.InvocationTargetException"
I'm using 3.3.2-1.el6 with
glusterfs-server-3.4.2-1.el6.x86_64
vdsm-gluster-4.13.2-1.el6.noarch
2014-01-17 1
Hi Juan,
On Fri, Jan 17, 2014 at 4:55 AM, Juan Hernandez wrote:
> You are right. Obtaining the global proxy setting is currently
> impossible in the API. There is no bug requesting it, as far as I know.
> Can you open a new one?
>
Here is the bug report for future reference:
https://bugzilla.r
On 01/17/2014 04:30 PM, Sven Kieske wrote:
Hi,
this seems to work, but as far as I see
I just get the events from the last start of the vm
until now?
Can the time range or the number of reported events
be influenced in some way?
Additionally I didn't find this function in REST-API
yet. Maybe I
On 01/17/2014 09:31 PM, William Kwan wrote:
Hi,
Keep seeing this in my engine.log, any idea where does this come from?
"Failed to invoke scheduled method gluster_async_task_poll_event:
java.lang.reflect.InvocationTargetException"
its mostly noise iirc.
fixed in 3.4 via: http://gerrit.ovirt.or
Hi Laercio,
Am Freitag, den 17.01.2014, 14:49 -0200 schrieb Laercio Motta:
> I tested the ISO here.
Thanks for being that brave! ;)
> - I was able to register with the engine and aprove (thing with
> 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version was not possible)
Great that this works now
On 01/17/2014 07:31 PM, Willard Dennis wrote:
Uuup! :)
Thanks for your assistance, Einav!
Now onwards
Hi Will,
this should work out of the box.
would help if you can open a bug on this not happening so it will be
verified it does work out of the box.
On 01/17/2014 08:07 PM, Dave Neary wrote:
Hi,
On 01/17/2014 06:19 PM, Willard Dennis wrote:
I have had success setting up CentOS 6.5 minimal in nodes, configuring
network, and then adding the node through the management interface - the
Engine takes care of installing & configuring the nodes.
H
On 01/17/2014 10:41 AM, Sven Kieske wrote:
Hi,
well the latest stable release is 3.3.2
3.3.3 is still in beta and 3.4 is in alpha.
just wondering - which type of OS are you planning to use for the hosts?
HTH
Am 17.01.2014 09:21, schrieb tristan...@libero.it:
Hello,
i have to create a ne
OK.. tested with bond0.102 for vlan102
I guess I can't do this with oVirt? It wouldn't pickup this interface. It
still shows up eth0, eth1 and bond0 only
Will
On Friday, January 17, 2014 1:15 PM, William Kwan wrote:
Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6
On 01/17/2014 11:38 PM, William Kwan wrote:
OK.. tested with bond0.102 for vlan102
I guess I can't do this with oVirt? It wouldn't pickup this interface.
It still shows up eth0, eth1 and bond0 only
you tried to define a vlan youself on the bond, or use a vlan via a
logical network over the
On 01/17/2014 06:25 PM, Edgars M. wrote:
Hi Meital
I tried to migrate another VM and it also failed.
This is what I get in UI:
Migration started (VM: nophpapp01, Source: novmnode1, Destination:
novmnode2, User: edgarsm).
Migration failed due to Error: Fatal error during migration. Trying to
m
On 01/17/2014 12:50 PM, Sandro Bonazzola wrote:
Il 17/01/2014 11:40, Gianluca Cecchi ha scritto:
On Thu, Jan 16, 2014 at 5:55 PM, Yaniv Dary wrote:
I think a this point it is safe to install.
If I can go, can I use
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtua
On 01/17/2014 11:32 AM, Gianluca Cecchi wrote:
On Fri, Jan 17, 2014 at 10:25 AM, Elad Ben Aharon wrote:
Indeed,
Using ovirt-engine APIs you can edit your iSCSI storage domain and extend it by
adding physical volumes from your shared storage (The process is managed by
ovirt-engine, the actual
I tried to define a virtual interface for vlan102, by
adding ifcfg-bond0.102
manually and restarted network services.
On Friday, January 17, 2014 4:45 PM, Itamar Heim wrote:
On 01/17/2014 11:38 PM, William Kwan wrote:
> OK.. tested with bond0.102 for vlan102
> I guess I can't do
On 01/18/2014 12:05 AM, William Kwan wrote:
I tried to define a virtual interface for vlan102, by
adding ifcfg-bond0.102
manually and restarted network services.
why not via ovirt-engine?
On Friday, January 17, 2014 4:45 PM, Itamar Heim wrote:
On 01/17/2014 11:38 PM, William Kwan wrote:
I opened a bug about missing info in UI:
https://bugzilla.redhat.com/show_bug.cgi?id=1054994
It actually failed with this error:
Thread-1417::DEBUG::2014-01-17 17:01:28,344::vm::768::vm.Vm::(run)
vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::starting migration monitor thread
Thread-1415::DEBUG::20
On 01/18/2014 12:07 AM, Meital Bourvine wrote:
I opened a bug about missing info in UI:
https://bugzilla.redhat.com/show_bug.cgi?id=1054994
It actually failed with this error:
Thread-1417::DEBUG::2014-01-17 17:01:28,344::vm::768::vm.Vm::(run)
vmId=`b8787906-187a-4234-a0c9-58fc4ddf2a57`::startin
On 01/16/2014 08:38 PM, Joop wrote:
David Li wrote:
What you described makes sense to me!
Now I tried the second time after rebooting everything:
engine-iso-uploader upload -v -i ISO_DOMAIN
CentOS-6.4-x86_64-netinstall.iso &
It could be me, but doesn't engine-iso-uploader ask for the admin
p
On 01/16/2014 08:35 PM, Assaf Muller wrote:
Ok so if you want to set the management network (untagged) and VM networks
(tagged) on the same bond,
then the management network has to be non-VM. IE: You won't be able to connect
instances to the management
network.
William - did this work for you
On 01/16/2014 07:21 PM, Satya Vempati wrote:
I have a disk image (i.e. a file) that I want to register as a disk
using the REST API.
The REST API works with existing disks, but does the API work with disk
images?
can you pleas explain what do you mean by an image compared to a disk?
___
This time I tried to use "spice html5 browser client". I downloaded the cert
from http:///ovirt-engine/ca.crt. This time the console window "
spice javascript client" showed up in the firefox (24.2.0) but it stays gray.
Nothing can be seen.
So what else am I missing here?
- Original M
On 01/16/2014 06:47 PM, Tobias Fiebig wrote:
Heho,
Unfortunately yes, you'll suffer from a down time during this process.
Well, as the downtime could be significantly decreased/the comfort for
an "migrate one vm, then the next" largely increased, if an nfs storage
could be mounted on multiple d
On Fri, Jan 17, 2014 at 12:10 PM, Gianluca Cecchi wrote:
>
> engine web admin available and reportsportal too
> but the password set up during first broken install for ovirt-admin
> user doesn't work
>
> Invalid credentials supplied.
>
> Could not login to JasperReports Server.
>
> Any hints on h
On 01/16/2014 05:02 PM, Jorick Astrego wrote:
Hi Rob,
Short answer, it really depends on your provider. But generally using a
single good provider makes life easier and cheaper.
I just had a client where we failed to implement any high available vm
platform due to the way they had set up their
On 01/16/2014 04:22 PM, Maurice James wrote:
Does anyone know if directdraw/directx works on windows guests in Ovirt?
adding spice devel
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 01/16/2014 11:45 AM, Frank Wall wrote:
On Thu, Jan 16, 2014 at 12:26:37PM +0500, Nauman Abbas wrote:
For some reason, the password I put during installation is not working.
I've tried the following combinations
No reason to use trial and error here. There's always the excellent
RHEV REST AP
On 01/18/2014 12:30 AM, David Li wrote:
This time I tried to use "spice html5 browser client". I downloaded the cert from
http:///ovirt-engine/ca.crt. This time the console window " spice javascript
client" showed up in the firefox (24.2.0) but it stays gray. Nothing can be seen.
So what else
On 17 Jan 2014, at 23:38, Itamar Heim wrote:
> On 01/18/2014 12:30 AM, David Li wrote:
>> This time I tried to use "spice html5 browser client". I downloaded the cert
>> from http:///ovirt-engine/ca.crt. This time the console window "
>> spice javascript client" showed up in the firefox (24.2
On 01/10/2014 08:44 PM, José Luis Sanz Boixader wrote:
I have an oVirt testing setup with 3 hosts running for a few weeks:
CentOS 6.4, oVirt 3.3.1, VDSM 4.13.0, iSCSI based storage domain.
I have just realized that sanlock has no leases on VM disks, so nothing
prevents vdsm/libvirt from starting
On 01/09/2014 10:34 AM, Sander Grendelman wrote:
No experience there but I can make some suggestions.
The upcoming self-hosted engine feature I mentioned before should have
built-in HA for these kind of situations.
http://www.ovirt.org/Features/Self_Hosted_Engine
Another option: AFAIK oVirt eng
On 01/09/2014 10:16 AM, squadra wrote:
Hello folks,
since the nfs discussion remembered me that i got some vm left to
migrate... here some kind of special question. i am open for
non-bestpractice hacky solutions, too
Situation is:
- 2 Ovirt Cluster - Same DC - one NFS backed, one iSCSI backed
The node is up and running. I can ssh in no problem. VM is started and running
ok with 0% CPU 3% memory.
I don't know how to connect VNC to it, my VNC console option is grayed out.
I also tried " browser plugin" option by installing spice-xpi on my RHEL6
(which runs the firefox browser). Now
On 01/06/2014 10:02 AM, Sven Kieske wrote:
Hi,
thanks for your answers so far, Omer provided me already with an example
of the changed properties:
deleteProtected turns into delete_protected
is there a complete list somewhere?
this would be helpful to maintain our code and to prevent errors
w
On 01/18/2014 12:49 AM, David Li wrote:
The node is up and running. I can ssh in no problem. VM is started and running
ok with 0% CPU 3% memory.
I don't know how to connect VNC to it, my VNC console option is grayed out.
stop the VM. edit it, change console from spice to vnc, start VM,
conne
On 12/31/2013 03:43 PM, Neil Schulz wrote:
On 12/31/2013 3:02 AM, Sander Grendelman wrote:
On Mon, Dec 30, 2013 at 7:57 PM, Neil Schulz mailto:neil.sch...@neteasy.us>> wrote:
I'm not very knowledgeable in VLANs. Sorry for the lack of
knowledge in advance.
Is it possible to create a
On Fri, Jan 17, 2014 at 11:48 PM, Itamar Heim wrote:
> On 01/09/2014 10:16 AM, squadra wrote:
>
>> Hello folks,
>>
>> since the nfs discussion remembered me that i got some vm left to
>> migrate... here some kind of special question. i am open for
>> non-bestpractice hacky solutions, too
>>
>> Si
On 01/03/2014 06:45 AM, Blaster wrote:
I have my current ovirt 3.3.2 AIO setup running on old hardware that I wish to
move to new hardware. All my VMs and associated virtual disks are on a single
physical disk. I can’t seem to find a nice way to “export” that disk and VMs,
remove it, and re-
OK, I will open a bug; trying now to bring up the node using CentOS 6.5
minimal, will keep good notes this time on what I have to do to get it
connected to the engine.
Thanks,
Will
-Original Message-
From: Itamar Heim [mailto:ih...@redhat.com]
Sent: Friday, January 17, 2014 3:34 PM
To: W
Hi,
> Could you explain this a bit more?
> Did all NICs appear, or did to many NICs appear?
I'm used to udev leave my NIC in sequence.
And in this case it got messed up:
common:
eth0 -> port 1
eth1 -> port 2
ethx >> port X
What happened:
eth0 -> port 1
eth4 -> port 3
eth5 -> port 4
eth6 -> port
I am not sure which install this is refering to. The only thing I did for this
is to update my firefox to 24.2.0.
- Original Message -
> From: Michal Skrivanek
> To: David Li
> Cc: Michal Skrivanek ; "users@ovirt.org List"
> ; Itamar Heim
> Sent: Friday, January 17, 2014 2:41 PM
> Su
On 01/18/2014 12:57 AM, squadra wrote:
On Fri, Jan 17, 2014 at 11:48 PM, Itamar Heim mailto:ih...@redhat.com>> wrote:
On 01/09/2014 10:16 AM, squadra wrote:
Hello folks,
since the nfs discussion remembered me that i got some vm left to
migrate... here some kind of s
On 01/18/2014 01:03 AM, David Li wrote:
I am not sure which install this is refering to. The only thing I did for this
is to update my firefox to 24.2.0.
install of ovirt engine 3.3
- Original Message -
From: Michal Skrivanek
To: David Li
Cc: Michal Skrivanek ; "users@ovirt.org
1 - 100 of 105 matches
Mail list logo