[Dx4win] winkey
last night winkey worked great with Writelog but no keying with Dx4WIN thru microKeyer2. All the settings were the same as 9.04. Turned everything off and went to bed. Got up this morning switched on and VOILA everything now working go figure! So I am in the dark as to what was happening but as long as it works, daddy is happy! 73's Cort K4WI __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] winkey
What are your Winkey settings in the CW Keyboard/WinKey settings? The settings shown in the example configuration for MK II and Dx4Win work properly with the demo (9.0.5.1221) and both MK II (Winkey v.10) and MK III (WinKey v.30). 73, ... Joe, W4TV On 2019-06-18 8:01 PM, Courtney Judd wrote: upgraded to latest 9.05 and the winkeyer doesn't work. I am using FT5000 with microKeyer2. Everything worked in previous version but now radio keys up and it acts like it is sending but nothing happening. Checked both dx4win and microham software but don't see what needs to be adjusted... radio and PTT is on com5 and winkeyer on com4 any ideas? 73's Cort K4WI __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4win / WINKEY interface still apparently broken
I have a different version of the problem The short version is that when sending CW from DX4win using WINKEY ( ALT-K) the DOT and DASH are reversed? I was using DX4WIN 9.03 and Winkey Firmware 30.1 ( Firmware 31.2 would not work with DX4WIN 9.03...known bug) Today I upgraded DX4WIN to 9.05 now NEITHER version of Winkey Firmware ( 30.1 nor 31.2) work correctly with DX4WIN ... 8^( WINKEY still works correctly with other programs, most notably N1MM with both versions of the Winkey firmware. So PAUL I assume the bug is still resides on your side of the aisle Dave NR1DX On 6/18/2019 8:01 PM, Courtney Judd wrote: upgraded to latest 9.05 and the winkeyer doesn't work. I am using FT5000 with microKeyer2. Everything worked in previous version but now radio keys up and it acts like it is sending but nothing happening. Checked both dx4win and microham software but don't see what needs to be adjusted... radio and PTT is on com5 and winkeyer on com4 any ideas? 73's Cort K4WI __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] winkey
upgraded to latest 9.05 and the winkeyer doesn't work. I am using FT5000 with microKeyer2. Everything worked in previous version but now radio keys up and it acts like it is sending but nothing happening. Checked both dx4win and microham software but don't see what needs to be adjusted... radio and PTT is on com5 and winkeyer on com4 any ideas? 73's Cort K4WI __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] WINKEY USB 3.1 Does NOT work with DX4WIN (Solved mostly)
OK here is the (hopefully) temporary workaround for those of you who have the latest Winkey USB 3.1 which DOES NOT (yet?) work with DX4WIN The cliff notes version is "down-rev" the WINKEY USB firmware from 31.02 to 30.10 the downside of this is largely the loss of the RTTY features in 31. For now I can live with this. You will also need to download TWO versions of WKTOOLS (tools4.3 works with 30.10 firmware and tools5.1 for 31.02 firmware.) you will need both tool kits to get back and forth. Also a good idea to unplug the USB cable after changing firmware for a few seconds so the drivers can reload Many thanks to K1EL at WINKEY for his prompt replies to my questions and the info necessary to do the reverse upgrade. Once the older firmware was loaded in the WINKEY , DX4WIM recognized the WINKEYER without a hitch. So far the folks at DX4WIN have not responded to acknowledge the problem . So when if ever there will be a fix that will allow return to later version of WINKEY firmware is unknown for now Also many thanks to Max N5HNJ who set me on the right track to get the information I needed and provided a few tips that even K1EL forgot to mention about the need for two different tool kits depending on the firmware. CU in the pile up Dave NR1DX Dave manu...@artekmanuals.com www.ArtekManuals.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Dave, you can go back and forth between 3.0 and 3.1, no problems. The 3.0 and 3.1 firmware can be download from K1EL: https://hamcrafters2.com/WinKeyer_31.html WK3tools is the only software you need to upload/update the firmware, be aware you need a specific WK3tools for the 3.1 and a different one for 3.0. From a CW stand point there is no much difference between the two version, but 3.1 enables the RTTY/FSK function that is fantastic. I hope Paul is considering to look at the code, maybe 3.0 will not be available anymore in the near future and this will push DX4WIN in a corner. -- 73 de Max, N5NHJ (I8NHJ) Thursday, May 23, 2019, 10:26:08 PM, you wrote: > Max > How do I get a copy of the earlier firmware , is it easy to install via > the USB port or is it a chip replacement? and what are the drawbacks > Dave > NR1DX > On 5/23/2019 6:06 PM, Max Mucci, N5NHJ (I8NHJ) wrote: >> Dave, >> I'm sorry for the delay, I've been busy all the day long. >> There is not any way to have the WK 3.1 working with DX4WIN, I asked Paul to >> fix this, I don't know if he is doing something. >> Only work around is to rollback/replace the current 3.1 firmware with the >> 3.0 that works. >> Let me know if you need any more help. >> Thursday, May 23, 2019, 2:42:41 PM, you wrote: >> >>> OK I found Max's post in the archive with a quoted response from K1EL >>> ...who points the finger a DX4WIN (not unexpected ...he said ..she >>> said?). I am not taking sides at this point anyone have "official >>> dialog" with the AD1C & the DX4WIN team about the problem before I go >>> bugging them? >>> Dave >> >> >>> On 5/23/2019 10:31 AM, Artek Manuals wrote: >>>> Bud >>>> Thanks that indeed did get DX4WIN and WINKEY to talk to each other >>>> >>>> A bit of a kludge ... I am still digging through the archives a month >>>> at a time (Grr 8^( ) for N5NHJ's posts on the subject >>>> >>>> Dave >>>> NR1DX >>>> >>>> >>>> On 5/23/2019 10:12 AM, Bud Semon wrote: >>>>> Hi Dave, >>>>> >>>>> When you have opened the keyboard window, try using Alt-F9 or F-10 to >>>>> set >>>>> the keyer speed. This may wake up the Winkey connection. That is >>>>> the way >>>>> mine works. >>>>> >>>>> 73, Bud N7CW >>>>> >>>>> On Thu, May 23, 2019 at 6:50 AM Artek Manuals >>>>> wrote: >>>>> >>>>>> Keith & Mike >>>>>> >>>>>> Thanks ... When I do this ( And save changes and exit setup) then I hit >>>>>> ALT-K which brings up the keyboard window, At the top of the Window it >>>>>> says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer >>>>>> when typed and I cant get to the Keyer set up from the Keyboard window) >>>>>> >>>>>> If I immediately close DX4WIN and open N1MM+ ...winkey is immediately >>>>>> recognized in N1MM and I am able to talk through the keyer with stored >>>>>> messages or in keyboard mode and it sends CW to the radio no problem >>>>>> >>>>>> Restarting DX4WIN ( or the computer) does not change anything >>>>>> >>>>>> ?? >>>>>> >>>>>> Dave >>>>>> >>>>>> On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: >>>>>>> Dave NR1DX: >>>>>>> >>>>>>> In the*File > Preferences > CW window I simply have Device Type: >>>>>>> WinKey and External keyer Port: Com 10 (yours is Com 2) all the others >>>>>>> have None.* >>>>>>> >>>>>>> _Now here is the other main part: _Alt-K brings up the keyer window in >>>>>>> DX4WIN. Then right-click on that window and bring up the Settings for >>>>>>> the WinKey itself. >>>>>>> >>>>>>> Here is what I have: >>>>>>> >>>>>>> Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal >>>>>>> Hang Time: 1:00 >>>>>>> >>>>>>> There are other Mode Register settings below that but those are for >>>>>>> the spacing and weight etc. >>>>>>> >>>>>>> Once everything is running you can eit
Re: [Dx4win] WINKEY USB and DX4WIN
Bud OK when pressing ALT-F9 or ALTF10, I wakes up WINKEY ( I think ??) and I can adjust the keyer speed on the screen but nothing is really happening with the keyer as the actual speed does not change with the paddle and I can not send any text from the window or with the function keys??? As an earlier poster pointed out winkey 3.1 does not work with DX4WIN 9.03 No one answered my query if they had contacted DX4WIN Support and gotten a reply so I will send Jim an email tonight Dave NR1DX On 5/23/2019 10:12 AM, Bud Semon wrote: Hi Dave, When you have opened the keyboard window, try using Alt-F9 or F-10 to set the keyer speed. This may wake up the Winkey connection. That is the way mine works. 73, Bud N7CW On Thu, May 23, 2019 at 6:50 AM Artek Manuals wrote: Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
OK I found Max's post in the archive with a quoted response from K1EL ...who points the finger a DX4WIN (not unexpected ...he said ..she said?). I am not taking sides at this point anyone have "official dialog" with the AD1C & the DX4WIN team about the problem before I go bugging them? Dave On 5/23/2019 10:31 AM, Artek Manuals wrote: Bud Thanks that indeed did get DX4WIN and WINKEY to talk to each other A bit of a kludge ... I am still digging through the archives a month at a time (Grr 8^( ) for N5NHJ's posts on the subject Dave NR1DX On 5/23/2019 10:12 AM, Bud Semon wrote: Hi Dave, When you have opened the keyboard window, try using Alt-F9 or F-10 to set the keyer speed. This may wake up the Winkey connection. That is the way mine works. 73, Bud N7CW On Thu, May 23, 2019 at 6:50 AM Artek Manuals wrote: Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Bud Thanks that indeed did get DX4WIN and WINKEY to talk to each other A bit of a kludge ... I am still digging through the archives a month at a time (Grr 8^( ) for N5NHJ's posts on the subject Dave NR1DX On 5/23/2019 10:12 AM, Bud Semon wrote: Hi Dave, When you have opened the keyboard window, try using Alt-F9 or F-10 to set the keyer speed. This may wake up the Winkey connection. That is the way mine works. 73, Bud N7CW On Thu, May 23, 2019 at 6:50 AM Artek Manuals wrote: Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Hi Dave, You may want to search the Archives. I seem to remember seeing someone upgrading to the latest firmware with WinKey and then having trouble getting WinKey to work with DX4WIN. I think I have 3.0.10 in my WinKey and the update installs new features DX4Win may not be able to handle until an update comes out. I would check your firmware to see what version you have. 73 Wayne WA1PMA On 5/23/2019 9:47 AM, Artek Manuals wrote: Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Max It is a brand new WINKEY so I assume it is 3.1 I will try and find your prior post... ( I hate that apparently one must search the archive on mailman month by month instead of the entire archive) Dave NR1DX On 5/23/2019 9:54 AM, Max Mucci, N5NHJ (I8NHJ) wrote: Hello Artek, What firmware do you have on the Winkeyer? Version 3.1 doesn't work, search for my previous posts. -- 73 de Max, N5NHJ (I8NHJ) Thursday, May 23, 2019, 1:47:05 PM, you wrote: Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Hi Dave, When you have opened the keyboard window, try using Alt-F9 or F-10 to set the keyer speed. This may wake up the Winkey connection. That is the way mine works. 73, Bud N7CW On Thu, May 23, 2019 at 6:50 AM Artek Manuals wrote: > Keith & Mike > > Thanks ... When I do this ( And save changes and exit setup) then I hit > ALT-K which brings up the keyboard window, At the top of the Window it > says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer > when typed and I cant get to the Keyer set up from the Keyboard window) > > If I immediately close DX4WIN and open N1MM+ ...winkey is immediately > recognized in N1MM and I am able to talk through the keyer with stored > messages or in keyboard mode and it sends CW to the radio no problem > > Restarting DX4WIN ( or the computer) does not change anything > > ?? > > Dave > > On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: > > Dave NR1DX: > > > > In the*File > Preferences > CW window I simply have Device Type: > > WinKey and External keyer Port: Com 10 (yours is Com 2) all the others > > have None.* > > > > _Now here is the other main part: _Alt-K brings up the keyer window in > > DX4WIN. Then right-click on that window and bring up the Settings for > > the WinKey itself. > > > > Here is what I have: > > > > Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal > > Hang Time: 1:00 > > > > There are other Mode Register settings below that but those are for > > the spacing and weight etc. > > > > Once everything is running you can either use the knob on the WinKey > > itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. > > > > Mine works fine here. > > > > Keith W3KB > > > > > > ------------ > > *From:* dx4win-boun...@mailman.qth.net > > on behalf of Artek Manuals > > > > *Sent:* Thursday, May 23, 2019 4:38 AM > > *To:* DX4WIN@mailman.qth.net > > *Subject:* [Dx4win] WINKEY USB and DX4WIN > > Maybe I am just dense but I cant seem to successfully configure DX4WIN > > to use WINKEY-USB keyer. > > > > Running a TS990 on the serial port (not USB port) on COM 1,� which talks > > to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just > > fine in stand alone with the demo program and also with N1MM+ contest > > logger but I cant seem to find the secret phrase to get it to talk to > > DX4WIN. Have tried about just every combo I can thing of in the > > window > > > > �Help! > > > > Dave > > NR1DX > > manu...@artekmanuals.com > > > > -- > > Dave > > manu...@artekmanuals.com > > www.ArtekManuals.com <http://www.ArtekManuals.com> > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > -- > Dave > manu...@artekmanuals.com > www.ArtekManuals.com > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Keith & Mike Thanks ... When I do this ( And save changes and exit setup) then I hit ALT-K which brings up the keyboard window, At the top of the Window it says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer when typed and I cant get to the Keyer set up from the Keyboard window) If I immediately close DX4WIN and open N1MM+ ...winkey is immediately recognized in N1MM and I am able to talk through the keyer with stored messages or in keyboard mode and it sends CW to the radio no problem Restarting DX4WIN ( or the computer) does not change anything ?? Dave On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: Dave NR1DX: In the*File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None.* _Now here is the other main part: _Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB *From:* dx4win-boun...@mailman.qth.net on behalf of Artek Manuals *Sent:* Thursday, May 23, 2019 4:38 AM *To:* DX4WIN@mailman.qth.net *Subject:* [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com <http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Dave manu...@artekmanuals.com www.ArtekManuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
See attached picture You need to select winkey and the winkey com port under external keyer Have you done this option? Have you a real winkey or an emulator (k3ng for example)? ...73 de Kostas SV1DPI (One of SZ1A-EP6T) Στις 23/5/2019 11:38 π.μ., ο Artek Manuals έγραψε: Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WINKEY USB and DX4WIN
Dave NR1DX: In the File > Preferences > CW window I simply have Device Type: WinKey and External keyer Port: Com 10 (yours is Com 2) all the others have None. Now here is the other main part: Alt-K brings up the keyer window in DX4WIN. Then right-click on that window and bring up the Settings for the WinKey itself. Here is what I have: Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal Hang Time: 1:00 There are other Mode Register settings below that but those are for the spacing and weight etc. Once everything is running you can either use the knob on the WinKey itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. Mine works fine here. Keith W3KB From: dx4win-boun...@mailman.qth.net on behalf of Artek Manuals Sent: Thursday, May 23, 2019 4:38 AM To: DX4WIN@mailman.qth.net Subject: [Dx4win] WINKEY USB and DX4WIN Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com<http://www.ArtekManuals.com> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] WINKEY USB and DX4WIN
Maybe I am just dense but I cant seem to successfully configure DX4WIN to use WINKEY-USB keyer. Running a TS990 on the serial port (not USB port) on COM 1,� which talks to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just fine in stand alone with the demo program and also with N1MM+ contest logger but I cant seem to find the secret phrase to get it to talk to DX4WIN. Have tried about just every combo I can thing of in the window �Help! Dave NR1DX manu...@artekmanuals.com -- Dave manu...@artekmanuals.com www.ArtekManuals.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Winkey
I am trying to setup WinKey with DX4Win. The winkey works fine on the same computer with another logging program. It uses Com Port 5. In DX4Win CW setup I have Device type set to Winkey, In software CW keying/ptt control I have NONE 0 NONE NONE, External keyer port = com 5. Save changes and exit. Exit DX4Win, Run DX4win again. Note says winkey not responding. Using another logger with Winkey selected (same computer, interfaces, etc.) and com5 all works fine. I am missing something? Thanks, Joe. (I did get the rotator to work OK, so there is some progress.) __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Winkey
On Mon, Dec 2, 2013 at 9:32 AM, Joe Young w6...@yahoo.com wrote: I am trying to setup WinKey with DX4Win. The winkey works fine on the same computer with another logging program. It uses Com Port 5. In DX4Win CW setup I have Device type set to Winkey, In software CW keying/ptt control I have NONE 0 NONE NONE, External keyer port = com 5. Save changes and exit. Exit DX4Win, Run DX4win again. Note says winkey not responding. Using another logger with Winkey selected (same computer, interfaces, etc.) and com5 all works fine. I am missing something? Thanks, Joe. (I did get the rotator to work OK, so there is some progress.) Hi Joe, First, WinKey can only be used by one program at a time -- COM ports can not be shared. Is it connected to a USB port on your computer, with a virtual COM port created by the USB driver, or do you have a real serial COM port between the computer and the WinKey? Your setup looks and sounds correct. I can't see my exact setup at home, but it's working fine for me. I'll try to remember to check my settings when I get home. - Jim -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Winkey
Thanks for all the help. All is working OK. I had made a dumb mistake when I forgot to disable all the I/O from the previous logger program. As you said You can't share ports. 73 de Joe. On Monday, December 2, 2013 2:01 PM, Jim Reisert AD1C jjreis...@alum.mit.edu wrote: On Mon, Dec 2, 2013 at 9:32 AM, Joe Young w6...@yahoo.com wrote: I am trying to setup WinKey with DX4Win. The winkey works fine on the same computer with another logging program. It uses Com Port 5. In DX4Win CW setup I have Device type set to Winkey, In software CW keying/ptt control I have NONE 0 NONE NONE, External keyer port = com 5. Save changes and exit. Exit DX4Win, Run DX4win again. Note says winkey not responding. Using another logger with Winkey selected (same computer, interfaces, etc.) and com5 all works fine. I am missing something? Thanks, Joe. (I did get the rotator to work OK, so there is some progress.) Hi Joe, First, WinKey can only be used by one program at a time -- COM ports can not be shared. Is it connected to a USB port on your computer, with a virtual COM port created by the USB driver, or do you have a real serial COM port between the computer and the WinKey? Your setup looks and sounds correct. I can't see my exact setup at home, but it's working fine for me. I'll try to remember to check my settings when I get home. - Jim -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us/ __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Winkey DX4WIN
__ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Winkey DX4WIN
I have just built and installed the newest version of K1EL's Winkeyer, the one that has two output ports, but requires only one COM port to run. Great little machine! At present, the CW keyboard in DX4WIN will key only one rig using Winkey. Are there any plans afoot to have DX4WIN switch output ports on Winkey when the user switches radios within DX4WIN? From my reading of the Winkey Docs, it appears to be fairly easy. (But, I've been wrong before) Anyone know how to make it work? Any help appreciated. John VE1JS __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] WINKEY and DX4WIN Question
I've just gone back to using WINKEY with the DX4WIN keyboard, and it is working very well. However, when I change speeds using the + or - commands, the increments (decrements) are in steps of 5 WPM rather than 2 WPM as with the basic DX4WIN keyboard. Is there any way of changing the size of the steps so that they are smaller? TNX es 73, Joe K2XX __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] WinKey settings from DX4WIN
Hi I put together a Winkeyer2 (as previouslly recommended by this group) and got it working today ... The WinKeyer - I build - has no stand alone possibility... I only connected the serial COM port and a linie out for the radio. Thats it. However the speed control from within DX4WIN have range of 5-255 (the keyer only supports 5-99) and i can only set the speed in increments/decrements of 5 WPM from the CW keyboard window using + / - ! How do i change this to 1 WPM steps and the correct range of 5-99 ? -- Kind Regards OZ1AXG Flam ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey
I have just set up my winkeyer usb to work with 7.02.15 and all works fine. I am using com5 as a virtual port Jan G0iVZ
[Dx4win] Winkey Problems
Paul, 2) To say that USB to serial converters can't be used is one thing, but telling me to hook it up, disable the config, reboot, then uninstall the converter...etc etc. This is not acceptable. I have written several protocols all over serial and never encountered anything like this. My explanation is not understood very well Paul, maybe because my English Is poor. 1. I had the same problem when winkey via USB to serial converter(GEMBIRD) Was unplugged (= not connected to the computer) 2. I had the same problem when winkey via USB to serial was connected to another usb port entry (= auto new or other comport number) 3. I had the same problem when winkey was NOT connected (unplugged) to a real comport (PCI) where it was setup in dx4win (com1 to com8) 4. It works very well with my USB-SERIAL converter from Gembird, SO NO NEED TO UNINSTALL THE CONVERTER Never said that USB to SERIAL can't be used ( I use several here from GEMBIRD and they can handle every signal you need , can't be said of all Other brands on the market) 5. If you need to move it to another comport WINKEY should first be disabled or unselected or not in use (whatever you call it)in DX4WIN configuration Restart the program and then you can connect winkey via serial or usbserial to another port and reselect that comport in dx4win and it will work 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: Paul Pescitelli [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 24, 2006 11:07 PM To: ON4AOI Cc: Dx4win@mailman.qth.net Subject: Re: [Dx4win] Winkey Problems Guy, Thanks for your assistance. However, it still does not work. Unfortunately at this time this software does not meet my needs and until some of the bugs get worked out I will be forced to use another package. Bugs: 1) There is no reason that failure to open a com port should ever prevent a program from gracefully exiting. Using an equivalent to force kill (CTL+ALT+DEL) to end a task is not good error handling code. 2) To say that USB to serial converters can't be used is one thing, but telling me to hook it up, disable the config, reboot, then uninstall the converter...etc etc. This is not acceptable. I have written several protocols all over serial and never encountered anything like this. In addition, I have not received input from anyone else in the community, not even the author. Guy, please do not take any of this personally and you are doing a wonderful job at supporting something that you believe in, but apparently it is just not for me at this time. regards, Paul K4UJ On 10/24/06, ON4AOI [EMAIL PROTECTED] wrote: Ok Paul, That is the problem You first have to disable the winkey with the USB to serial converter CONNECTED and normally WORKING in dx4win Next close dx4win normally, (maybe you need to reboot also) unplug the USB to serial attach to the pci serial card and then restart DX4WIN and select where winkey is attached now. It will work then 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: Paul Pescitelli [mailto:[EMAIL PROTECTED] Sent: Monday, October 23, 2006 9:08 PM To: ON4AOI Subject: Re: [Dx4win] Winkey Problems Yes, I did have a USB to serial converter... However, I took it out this morning and replaced it with a new pci serial card. I still have the same problem. regards, Paul On 10/23/06, ON4AOI [EMAIL PROTECTED] wrote: Yep Paul, You have probably unplugged or plugged in the winkey via a USB to serial converter and then you get this problem. Check if winkey is on com1 or has a good connection you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3 times 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, October 23, 2006 3:15 PM To: dx4win@mailman.qth.net Subject
[Dx4win] Winkey Problems
Hi Lee, Sorry to hear that from you. The problem I had was the one I described in earlier mails. Dx4win seems memories on wish COMPORT it was installed the first time and has problems when it is moved to another port If you remember where it was connected the very first time then you probably can also correct the problem. The other possibility I just think of is that you have The BAD update from WINDOWS XP where many things went Wrong with port communications e.o. This was posted a few months ago here on this reflector, I will try to find It back in + 18000 dx4win mails I have here hi 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: Lee, N5PO [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 24, 2006 2:43 PM To: ON4AOI Subject: RE: [Dx4win] Winkey Problems Not SoI have my Winkey hooked directly to a pci card..COM4 and it does not work. I also have COM1 and COM3. Does not work there either...I have used 2 different computers, same results.. Lee, N5PO --- ON4AOI [EMAIL PROTECTED] wrote: Ok Paul, That is the problem You first have to disable the winkey with the USB to serial converter CONNECTED and normally WORKING in dx4win Next close dx4win normally, (maybe you need to reboot also) unplug the USB to serial attach to the pci serial card and then restart DX4WIN and select where winkey is attached now. It will work then 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: Paul Pescitelli [mailto:[EMAIL PROTECTED] Sent: Monday, October 23, 2006 9:08 PM To: ON4AOI Subject: Re: [Dx4win] Winkey Problems Yes, I did have a USB to serial converter... However, I took it out this morning and replaced it with a new pci serial card. I still have the same problem. regards, Paul On 10/23/06, ON4AOI [EMAIL PROTECTED] wrote: Yep Paul, You have probably unplugged or plugged in the winkey via a USB to serial converter and then you get this problem. Check if winkey is on com1 or has a good connection you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3 times 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, October 23, 2006 3:15 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Winkey Problems Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says could not open winkey port 1. So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey Problems
Guy, Thanks for your assistance. However, it still does not work. Unfortunately at this time this software does not meet my needs and until some of the bugs get worked out I will be forced to use another package. Bugs: 1) There is no reason that failure to open a com port should ever prevent a program from gracefully exiting. Using an equivalent to force kill (CTL+ALT+DEL) to end a task is not good error handling code. 2) To say that USB to serial converters can't be used is one thing, but telling me to hook it up, disable the config, reboot, then uninstall the converter...etc etc. This is not acceptable. I have written several protocols all over serial and never encountered anything like this. In addition, I have not received input from anyone else in the community, not even the author. Guy, please do not take any of this personally and you are doing a wonderful job at supporting something that you believe in, but apparently it is just not for me at this time. regards, Paul K4UJ On 10/24/06, ON4AOI [EMAIL PROTECTED] wrote: Ok Paul, That is the problem You first have to disable the winkey with the USB to serial converter CONNECTED and normally WORKING in dx4win Next close dx4win normally, (maybe you need to reboot also) unplug the USB to serial attach to the pci serial card and then restart DX4WIN and select where winkey is attached now. It will work then 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: Paul Pescitelli [mailto:[EMAIL PROTECTED] Sent: Monday, October 23, 2006 9:08 PM To: ON4AOI Subject: Re: [Dx4win] Winkey Problems Yes, I did have a USB to serial converter... However, I took it out this morning and replaced it with a new pci serial card. I still have the same problem. regards, Paul On 10/23/06, ON4AOI [EMAIL PROTECTED] wrote: Yep Paul, You have probably unplugged or plugged in the winkey via a USB to serial converter and then you get this problem. Check if winkey is on com1 or has a good connection you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3 times 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, October 23, 2006 3:15 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Winkey Problems Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says could not open winkey port 1. So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Tue Oct 24 17:40:19 2006 From: [EMAIL PROTECTED] (Dennis Mowers) Date: Tue Oct 24 17:46:57 2006 Subject: [Dx4win] 99 % CPU Usage In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] I have looked at the processes running, and they are all zero, except DX4WIN. I ran Spybot and Ad-Aware, and while they are running, DX4WIN drops to 30-40%, but back to 99-100% when the other programs stop executing. If I try running a couple of more Windows, and something that needs CPU time, the computer is very slow. Right now I have MMTTY running, taking about 3%, and 96% is being taken by DX4WIN. No other processes show higher than zero. DX4WIN must be doing something to hog all the CPU resources, the System Idle Process shows zero. While on my other computer running DX4WIN, it is 94-97%. KR4DA wrote: That is a loaded question. practically identical
[Dx4win] Winkey Problems
Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says could not open winkey port 1. So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == From [EMAIL PROTECTED] Mon Oct 23 09:49:09 2006 From: [EMAIL PROTECTED] (ON4AOI) Date: Mon Oct 23 09:55:42 2006 Subject: [Dx4win] Winkey Problems In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Yep Paul, You have probably unplugged or plugged in the winkey via a USB to serial converter and then you get this problem. Check if winkey is on com1 or has a good connection you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3 times 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, October 23, 2006 3:15 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Winkey Problems Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says could not open winkey port 1. So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey Problems
Paul I have the exact same problem with my WinKey and Dx4win using version 7.02.15 My WinKey works fine with Writelog. Lee, N5PO --- Paul Pescitelli [EMAIL PROTECTED] wrote: Running version 7.02.15 When I try to open the CW keying window I get an error on the title bar of the window that says could not open winkey port 1. So then I try to close the window and then a modal dialog box appears with An exception occured! ThreadError:Access is denied(5) With only an OK button, so I click it..the box goes away, but you still cant do anything in the program. At this point you can't even quit the program, so there is surely a bug or 3 in there somewhere. I have tested the com port setup with Logger32, so I know everything works from a hardware perspective. Any ideas ? -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey and IC756PROII
--- Joseph Young [EMAIL PROTECTED] wrote: Hello. I am using DX4WIN 7.01. Before I left for vacation there was talk on here about WinKey capability. Is that ready? Where would I find that information. Also, I am trying to add my IC756PROII as the second radio. Joe, Winkey support was added in 7.02. It's a free upgrade from 7.01, just download it from www.dx4win.com. 7.02 also supports 756 pro III directly, just make sure baud rates match. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Thu Jun 15 21:23:59 2006 From: [EMAIL PROTECTED] (Mike Tessmer) Date: Fri Jun 16 00:43:07 2006 Subject: [Dx4win] Date filter, IOTA window Message-ID: [EMAIL PROTECTED] A couple questions for the group: -- How can I set up a filter to search for QSOs by year? I thought it might be interesting to track how many countries, zones, etc., I've worked each year. The only examples I see seem to deal with QSL dates. I'm not concerned with that - I just want to know what I worked each of the past 10 years. Just typing in a year gets me a Value is not a valid date box. -- How do I change the available bands in the IOTA window? For DXCC, WAZ, WAS, etc., I can go to preferences and check which bands I want to show up in their respective window but I can't find any way to change the IOTA window. I'm not planning on working too many IOTAs on the 3cm band. :-) New to the list here..sorry if any of this is redundant. Thanks! 73, Mike K9NW
[Dx4win] Winkey
Paul, Just a little patience Let the Beta tester do the testing first 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Pescitelli Sent: Monday, April 24, 2006 12:05 AM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Winkey super, where's my BETA ;-) On 4/23/06, Jim Reisert AD1C [EMAIL PROTECTED] wrote: At 11:06 AM 4/23/2006, Paul van der Eijk wrote: Support for WinKey is being tested as I write this, I can confirm this! :-) 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey
Maybe you could ask your question to Paul or Steve ! sure i love to see it was supported in dx4win.I'm still waiting to upgrade from 6.04 !! - Original Message - From: Paul Pescitelli [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, April 22, 2006 11:11 PM Subject: [Dx4win] Winkey Greetings, I am new to the list and sure that this topic has come up before.. Has anyone gotten the K1EL winkeyer to work with DX4WIN, or know of a plan to support it.. I have not been able to make it work yet... -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 22/04/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 22/04/2006
[Dx4win] Winkey
-Original Message- On Behalf Of marc wullaert Sent: 23. huhtikuuta 2006 10:48 To: Paul Pescitelli; dx4win@mailman.qth.net Subject: Re: [Dx4win] Winkey Maybe you could ask your question to Paul or Steve ! sure i love to see it was supported in dx4win.I'm still waiting to upgrade from 6.04 !! Also staying with 6.04 for the same reason. Hope the Winkey support comes soon. Erkki OH2BF
[Dx4win] Winkey
waiting to upgrade from 6.04 !! me too ! 73 Chris DL5NAM ___ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192
[Dx4win] Winkey
Gents, I did send an email to the support address asking the question. We will see. Sounds like there are several of us that would benefit from WinKey functionality. Paul On 4/23/06, Chris Sauvageot [EMAIL PROTECTED] wrote: waiting to upgrade from 6.04 !! me too ! 73 Chris DL5NAM ___ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Sun Apr 23 09:18:57 2006 From: [EMAIL PROTECTED] (Dale Jones) Date: Sun Apr 23 09:20:46 2006 Subject: [Dx4win] ts-440 In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] HI Bill I have uses the ts 440 with good results make sure the one you are buying has the option to allow computer control it is called the ic-10 kit in the manual and an adapter connector cable from radio to computer. mods dk has a plans to build this. If you already have the radio and it doesn't have the chip in it email me direct and I'll see if I can find the spare I have some place in my shack [EMAIL PROTECTED] Dale Bill Salyers wrote: I am looking to purchase a ts-440 class (440, ic-735 or FT757) with DX4WIN. I noticed that this rig is not one of the identified rigs, but a generic Kenwood is. Has anyone used a 440, 735 or 757 with DX4WIN. Any recommendations on one of these? Thanks AJ8B = Bill___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Winkey
Paul, Support for WinKey is being tested as I write this, --Paul At 07:11 PM 4/22/2006, Paul Pescitelli wrote: Greetings, I am new to the list and sure that this topic has come up before.. Has anyone gotten the K1EL winkeyer to work with DX4WIN, or know of a plan to support it.. I have not been able to make it work yet... -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
[Dx4win] Winkey
At 11:06 AM 4/23/2006, Paul van der Eijk wrote: Support for WinKey is being tested as I write this, I can confirm this! :-) 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] Winkey
super, where's my BETA ;-) On 4/23/06, Jim Reisert AD1C [EMAIL PROTECTED] wrote: At 11:06 AM 4/23/2006, Paul van der Eijk wrote: Support for WinKey is being tested as I write this, I can confirm this! :-) 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == From [EMAIL PROTECTED] Sun Apr 23 20:38:23 2006 From: [EMAIL PROTECTED] (Todd) Date: Sun Apr 23 20:40:23 2006 Subject: [Dx4win] Slashed 0 font References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Don't know what you typed into Google buthis was the first choice I got :O) and for anyone else lokingf or them http://www.qsl.net/wa6axe/fonts.html Todd WM8C's Ham Links www.wm8c.com All outgoing email scanned with NAV2005 Hi All, Computer crashed and I lost the slashed 0 font I had on it. It was K9YY - C2, can any one let me have this ?? I tried a google search to no avail Thanks... By the way, I also forgot where I have to put the font! Can you help me on this to?? Many thanks 73's Tony G8DQZ
[Dx4win] Winkey
Greetings, I am new to the list and sure that this topic has come up before.. Has anyone gotten the K1EL winkeyer to work with DX4WIN, or know of a plan to support it.. I have not been able to make it work yet... -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == From [EMAIL PROTECTED] Sat Apr 22 19:38:35 2006 From: [EMAIL PROTECTED] (G) Date: Sat Apr 22 19:40:33 2006 Subject: [Dx4win] DX4WIN_SUMMARY_DXCC Message-ID: [EMAIL PROTECTED] Can someone give me a write up of the column explanations in the REPORTS, DXCC, SUMMARY, OK? I've been trying to explain to myself what the columns mean and the operation manual is useless. It has almost nothing in this regard. Thanks. George From [EMAIL PROTECTED] Sat Apr 22 21:02:57 2006 From: [EMAIL PROTECTED] (Bill Salyers) Date: Sat Apr 22 21:04:51 2006 Subject: [Dx4win] ts-440 Message-ID: [EMAIL PROTECTED] I am looking to purchase a ts-440 class (440, ic-735 or FT757) with DX4WIN. I noticed that this rig is not one of the identified rigs, but a generic Kenwood is. Has anyone used a 440, 735 or 757 with DX4WIN. Any recommendations on one of these? Thanks AJ8B = Bill From [EMAIL PROTECTED] Sat Apr 22 22:21:44 2006 From: [EMAIL PROTECTED] (Bruce Osterberg) Date: Sat Apr 22 22:23:44 2006 Subject: [Dx4win] Winkey In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Me either: Thats why I cahnged to Logger32. N9BX 73 Bruce From: Paul Pescitelli [EMAIL PROTECTED] To: dx4win@mailman.qth.net Subject: [Dx4win] Winkey Date: Sat, 22 Apr 2006 19:11:04 -0400 Greetings, I am new to the list and sure that this topic has come up before.. Has anyone gotten the K1EL winkeyer to work with DX4WIN, or know of a plan to support it.. I have not been able to make it work yet... -- 73 - PaulK4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ == http://www.dx-is.com http://www.openhsmm.org == ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] WinKey dx4Win
I would also like this feature. As it is a great Keyer. Bruce N9BX 73 Bruce From: Jim Reisert AD1C [EMAIL PROTECTED] To: Vanderydt Theo [EMAIL PROTECTED] CC: dx4win@mailman.qth.net Subject: Re: [Dx4win] WinKey dx4Win Date: Sun, 18 Dec 2005 12:20:21 -0500 At 12:17 PM 12/18/2005, Vanderydt Theo wrote: Has anyone tried to get his Winkey working with DX4Win? I'm still using V6.02 and wonder if i can get this working the same way as i use it with N1MM-contest logger? Winkey is not supported by DX4WIN at this time. I would also like this feature! 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] WinKey dx4Win
Hi all, Has anyone tried to get his Winkey working with DX4Win? I'm still using V6.02 and wonder if i can get this working the same way as i use it with N1MM-contest logger? Thanks on forehand for any advice. Seasons greetings. Theo ON4ATW. [EMAIL PROTECTED]
[Dx4win] WinKey dx4Win
At 12:17 PM 12/18/2005, Vanderydt Theo wrote: Has anyone tried to get his Winkey working with DX4Win? I'm still using V6.02 and wonder if i can get this working the same way as i use it with N1MM-contest logger? Winkey is not supported by DX4WIN at this time. I would also like this feature! 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] WinKey with USB ...
This keyer is not supported by DX4WIN why advertise here ? Marc on4ma - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.18/87 - Release Date: 1/09/2005 From [EMAIL PROTECTED] Fri Sep 2 06:56:51 2005 From: [EMAIL PROTECTED] (ON4AOI) Date: Fri Sep 2 07:01:51 2005 Subject: [Dx4win] WinKey with USB ... In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] This keyer is not supported by DX4WIN why advertise here ? Marc on4ma What's not is can be in the future Marc 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database
[Dx4win] WinKey with USB ...
The microKEYER is not only a keyer and it can be used by Dx4Win as a radio control interface, CW interface, PTT interface, PSK interface and RTTY interface. My own Dx4Win 7.01 can do all this things using 3 different com: ports created by the USB device router: one usb port handle 3 com: ports... I think it's a good stuff, folks! Isn't it? 73s de Leo, IZ5FSA Marc Wullaert ha scritto: This keyer is not supported by DX4WIN why advertise here ? Marc on4ma - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.18/87 - Release Date: 1/09/2005 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- avast! Antivirus: Inbound message clean. Virus Database (VPS): 0535-2, 31/08/2005 Tested on: 02/09/2005 14.15.28 avast! - copyright (c) 1988-2004 ALWIL Software. http://www.avast.com -- From [EMAIL PROTECTED] Fri Sep 2 09:00:46 2005 From: [EMAIL PROTECTED] (Joe Subich, W4TV) Date: Fri Sep 2 09:05:35 2005 Subject: [Dx4win] WinKey with USB ... In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Although WinKey is not supported by DX4WIN (an unfortunate oversight), the microHAM CW Keyer supports software CW on the DTR line which is supported by DX4WIN. CW Keyer is useful for radio control and as a CW output device. The enhanced WinKey capabilities, with message memory and paddle input, continue to function in parallel with the DX4WIN generated CW. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com -Original Message- From: Marc Wullaert [mailto:[EMAIL PROTECTED] Sent: Friday, September 02, 2005 1:42 AM To: Joe Subich, W4TV; dx4win@mailman.qth.net Subject: Re: [Dx4win] WinKey with USB ... This keyer is not supported by DX4WIN why advertise here ? Marc on4ma - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, September 01, 2005 10:24 PM Subject: [Dx4win] WinKey with USB ... The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message
[Dx4win] WinKey with USB ...
The new microHAM CW Keyer is now shipping. I have been told that the initial batch left Slovakia for the US yesterday. Additional units should follow on a regular basis. What is the microHAM CW Keyer? For full details see: www.microham-usa.com/Products/ck.html In short: CW KEYER is a powerful USB CW interface/memory keyer based on the K1EL WinKey chip and microKEYER technology. CW Keyer provides the CW features of the original microKEYER and a USB radio control (CAT) interface in a small, readily portable package for those with who do not need the audio handling of microKEYER. CW KEYERT uses a single USB port and is directly supported by many logging and contest programs for both radio control and CW transmission. CW KEYER also supports a PS/2 keyboard for keyboard sent CW and control of the memory functions or a PS/2 keypad for message control only. The keyboard or keypad function even when CW KEYER is connected to a computer. The user can program up to nine extra messages into CW Keyer and use the keypad to send them as needed even if the keyer is under control of an application program (logger, contest logger, etc.). CW Keyer has two RCA outputs on the rear panel ... although they are labeled CW and PTT the outputs are driven by Pin3 and Pin5 of the WinKey chip and can be used to key two different radios if supported by the controlling application. Alternatively, the CW and PTT outputs can be used as inputs to a traditional switch box. 73, ... Joe Subich, W4TV microHAM America, LLC www.microHAM-USA.com
Fw: [Dx4win] dx4win -WINKEY
I sended this mail some 2 weeks ago but got no respons! Wintertime is over ,whe are moving to the springtime, any response please from Steve or Paul ? Marc on4ma To Paul and programmers I just finished my Winkey CW keyer.Could it be imported into the next version of dx4win ? I now use QD keyer by G3VGR.Works OK just the PTT timing is a little bit long when the first dit or dot is sended ! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.6 - Release Date: 6/05/2005
[Dx4win] DX4WIN WinKey?
Does someone know if K1EL WinKey is supported or if there are plans for future support? 73 Rob PA2R
[Dx4win] DX4WIN WinKey ??
Hi, I hope this is not the question Nr. 1000 for this topic, hi hi. Is there a possibility to use WinKey in the actuall version of DX4WIN ? I am using V5.03 and it seems that there is no way to use it. 73 Sven DL8HCO --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] DX4WIN WinKey ??
DX4win does'nt work with WinKey as far as I know. It has not yet a routine that handles WinKey protocol, so they dont understand each other. Jos on4kj ( OR4G operator ) - Original Message - From: S. Ohsoling DL8HCO [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, March 14, 2004 8:09 PM Subject: [Dx4win] DX4WIN WinKey ?? Hi, I hope this is not the question Nr. 1000 for this topic, hi hi. Is there a possibility to use WinKey in the actuall version of DX4WIN ? I am using V5.03 and it seems that there is no way to use it. 73 Sven DL8HCO --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
