[Elecraft] Can't find release notes for K4 version R35
I installed version R35 today, but didn't see any release notes as part of the update, or on the elecraft website itself. Any idea what has changed? 73, Bob, WB4SON __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Weird K-3 Power Behavior
Fred et al: Based on Don's information, 4 bars on solid, 5th bar flickering, 6th bar is beginning of ALC. Also I seem to recall an exchange of information with a member of the Elecraft staff that confirmed the beginning of ALC at the 6th bar. I think this is getting into a hair splitting issue. 73 Bob, K4TAX On 4/6/2024 2:03 PM, Fred Jensen wrote: Hmmm ... I thought that the ALC started AT the 5th bar and the first 4 bars were sort of a VU-meter. Hence Don's occasional advice, "4 full bars and the 5th occasionally flickering." I've been known to get things wrong in the past however. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County Bob McGraw wrote on 4/6/2024 8:50 AM: Just to be clear on the point. The correct audio level should produce 4 bars indicated on the ALC Scale. Actual ALC action does not start until after the 5th bar. Yes, after any power adjustment, the audio system does start at lower gain, quickly ramping to the desired level. This is done to prevent any potential power overshoot. After the initial transmission at the new power setting, the remainder of transmissions are at the proper power level setting. 73 Bob, K4TAX On 4/5/2024 5:50 PM, elecraft-requ...@mailman.qth.net wrote: Message: 14 Date: Thu, 4 Apr 2024 21:03:20 -0400 From: Pete Smith N4ZR To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Weird K-3 Power Behavior Message-ID:<59c02b5d-1800-4a78-9d73-60461d231...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed I just set the audio to be sure I'm? hitting 4 bars of ALC,and the cycle of adjust K-3 power to full expected drive to the KPA-1500 is now more like CW, but the question remains -? after I adjust the power a tiny fraction in either direction, why does the K-3's output power drop way back and relatively slowly recover? 73, Pete N4ZR <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> Virus-free.www.avg.com <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> -- "You only grow old when you run out of new things to do" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Weird K-3 Power Behavior
Just to be clear on the point. The correct audio level should produce 4 bars indicated on the ALC Scale. Actual ALC action does not start until after the 5th bar. Yes, after any power adjustment, the audio system does start at lower gain, quickly ramping to the desired level. This is done to prevent any potential power overshoot. After the initial transmission at the new power setting, the remainder of transmissions are at the proper power level setting. 73 Bob, K4TAX On 4/5/2024 5:50 PM, elecraft-requ...@mailman.qth.net wrote: Message: 14 Date: Thu, 4 Apr 2024 21:03:20 -0400 From: Pete Smith N4ZR To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Weird K-3 Power Behavior Message-ID:<59c02b5d-1800-4a78-9d73-60461d231...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed I just set the audio to be sure I'm? hitting 4 bars of ALC,and the cycle of adjust K-3 power to full expected drive to the KPA-1500 is now more like CW, but the question remains -? after I adjust the power a tiny fraction in either direction, why does the K-3's output power drop way back and relatively slowly recover? 73, Pete N4ZR -- "You only grow old when you run out of new things to do" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 239, Issue 12
Did the fault occur immediately after a band change? I occasionally see a slight power overshoot from my K3S on the first transmission after a band change. Perhaps a transmit gain calibration is in order. I use the K3 Utility for this purpose and a known good 50 ohm dummy load. The radio will do the rest. 73 Bob, K4TAX On 3/30/2024 7:37 PM, elecraft-requ...@mailman.qth.net wrote: Message: 7 Date: Wed, 27 Mar 2024 10:18:59 -0400 From: Pete Smith N4ZR To:kpa1...@groups.io, Elecraft Support, Elecraft List Subject: [Elecraft] Erratic KPA-1500 behavior Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed This morning, starting the CWT,? every few transmissions my amp was faulting with the indication of excessive driving power (~67 watts vs 33 watts normally).? Each time, it would fault once, then operate normally for a dozen or so transmissions before the next fault. Then, about 10 minutes into the hour, the faults stopped happening.? The K-3 showed 33 watts throughout I checked the KPA-1500 log, and all it shows is the "power input" fault.? What could be causing this erroneous indication of excessive drive?? A sticky relay? -- 73, Pete N4ZR -- "You only grow old when you run out of new things to do" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S help needed
THANKS for posting the result and efforts which took place to get you up and running. I hope you enjoy your K3S as much as I've enjoyed mine. 73 Bob, K4TAX Message: 18 Date: Sat, 23 Mar 2024 16:49:27 -0400 From: Carol Richards To:elecraft@mailman.qth.net Subject: [Elecraft] K3s Message-ID:<59b040f2-7707-4315-894d-30655295c...@comcast.net> Content-Type: text/plain; charset=us-ascii Good evening all. Finally got the k3s keying. Thanks for all the help I received. Carol On 3/24/2024 2:08 PM, elecraft-requ...@mailman.qth.net wrote: Message: 18 Date: Sat, 23 Mar 2024 16:49:27 -0400 From: Carol Richards To:elecraft@mailman.qth.net Subject: [Elecraft] K3s Message-ID:<59b040f2-7707-4315-894d-30655295c...@comcast.net> Content-Type: text/plain; charset=us-ascii Good evening all. Finally got the k3s keying. Thanks for all the help I received. Carol -- "You only grow old when you run out of new things to do" __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Dust Covers
Here is a direct link to Elecraft covers. https://www.jse-repair.com/product-category/dust-covers-2/dust-covers/elecraft/ Bob KA9MDP On Sat, Jan 20, 2024 at 11:42 AM David Rutledge via Elecraft < elecraft@mailman.qth.net> wrote: > www.jse-repair.com866-457-3777sa...@jse-repair.com > Try these. I just received a cover for my Alpha 87A. Very nice > work.73,DavidAL5M > > > Sent from Yahoo Mail for iPhone > > > On Saturday, January 20, 2024, 1:36 PM, David Bunte > wrote: > > Ron - > > I searched the best I know how and can’t find JSE repair. Do you have valid > contact info? > > Thanks, > > Dave - K9FN > > On Sat, Jan 20, 2024 at 2:26 PM Ron KF7ZN wrote: > > > JSE repair, I have dust covers for all of my gear and have been very > > pleased. > > > > *Have a nice day!* > > Ron Wilcox KF7ZN > > RN, BHS, BSN, CCM > > Ham Radio Volunteer Examiner > > Vice President Utah DX Association > > HamSCI > > > > > > On Sat, Jan 20, 2024 at 12:19 PM Mike Rees wrote: > > > > > I purchased a used SP3. The seller included a denim dust cover. I > have > > > not been able to find a source for additional covers. I want covers > for > > my > > > K3s, P3, and 2nd SP3. I would appreciate a point of contact. > > > > > > -- > > > 73 > > > Mike > > > N6YSK > > > __ > > > Elecraft mailing list > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/mmfaq.htm > > > Post: mailto:Elecraft@mailman.qth.net > > > > > > This list hosted by: http://www.qsl.net > > > Please help support this email list: http://www.qsl.net/donate.html > > > Message delivered to rgloga...@gmail.com > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to dpbu...@gmail.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to a...@rocketmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to b...@bobkehr.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KAT 500 Loses Match
From your description, something in the antenna system, coax, connector, balun, antenna is heating and changing value. I doubt it is the radio, or the amplifier, or the tuner. That antenna is rated at 250 watts PEP. Sure bet you are exceeding the power rating with the KPA500 running. 73 Bob, K4TAX On 1/13/2024 3:58 PM, elecraft-requ...@mailman.qth.net wrote: Message: 5 Date: Fri, 12 Jan 2024 23:28:09 -0600 From: "Michael Reynolds, NO6O" To:elecraft@mailman.qth.net Subject: Re: [Elecraft] KAT 500 Loses Match Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed Greetings, I joined this list today, after sending a message to Elecraft support, describing a similar problem.? I have an Icom IC-7610, with the KPA500 and KAT500, and my SWR spontaneously climbs into the red sometimes during transmissions.? It takes some effort to correct it, and I typically lose a QSO in the process.? The relays go nuts trying to re-tune, and sometimes produces a fault condition. Usually, I can correct it by restarting both the amplifier and tuner.? I have a Comet CHA-250HD, which has a almost a flat 1.1 SWR from 80m to 6m.? I don't need a tuner while barefoot.? However, when I first hooked up the KPA500, the SWR was not flat, and added the KAT500 this week, which led to my SWR issue. I hope the cause and resolution can be determined. Michael NO6O __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Beware of junk mail:
F Y I -- When one sends an e-mail to multiple persons or addresses, PLEASE use the BCC address line for the distribution. Do send the message TO yourself. This minimizes the ability to clone or copy e-mail addresses. By avoiding visible e-mail addresses it is much more difficult to build an spam and junk e-mail address list. That is how most of the junk e-mail originates. 73 Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Beware of junk mail: "four pictures to you from Elecraft List"
…and along came AI. The grammatical gaffes will soon become a thing of he past from the larger producers. In my experience all these sleuthing techniques beyond looking at the sending address are largely a waste of time and money unless you have the ability to pursue the originating entity. My magic is the delete option Bob KA9MDP On Wed, Jan 3, 2024 at 09:25 jerry wrote: > Once you find the initial IP address in the headers, you can use any > number > of online searches to find out who it belongs to. If you get a notice > from > "Fedex", and it's from an IP that belongs to an ISP in Bulgaria, that's > a pretty > good hint. > > I mostly use this sort of search to satisfy my curiosity - but I > generally already > know that it's a scam. Often the English is bad, there are non-native > expressions > etc. But I don't expect that to continue. > > Sooner or later, the scammers will learn to do perfect American > English. Or will they? >I've heard that grammatical gaffes help select for marks who are not > smart or well educated - > because they're where the money is. > > - Jerry, KF6VB > > > > > > On 2024-01-03 07:18, Bill Lederer wrote: > > If you use google mail/gmail, there is a feature called "Show > > Original" that you see if you click the three dots in the upper right > > corner of the email. > > > > You can also report phishing from that drop-down. > > > > On Tue, Jan 2, 2024 at 6:08 PM jerry wrote: > > > >> The email address means little. Email systems will accept whatever > >> you > >> type in. What's more meaningful is the originating IP address. > >> That's > >> hard to fake. Most mailers have a "show headers" feature so you can > >> see > >> all the machines that the email passed through. > >> > >> - Jerry, KF6VB > >> > >> On 2024-01-02 14:26, Pete Smith N4ZR wrote: > >>> This underlines how important it is to use an e-mail program that > >>> displays the originating address. That "you've won a ..." e-mail > >>> from a major retailer is quickly revealed to be from some obscure > >>> address (not Home Depot or Walmart, after all). A couple of days > >> ago, > >>> I received a message purportedly from a relative of my > >> sister-in-law, > >>> who passed away last fall. Happily, the originating address was a > >>> giveaway - "Amanda Rosman ". > >>> > >>> 73, Pete N4ZR > >>> > >>> On 1/2/2024 4:13 PM, Dave wrote: > >>>> I don't know if anyone else on the Elecraft list is receiving > >> this > >>>> nonsense, but I have reported it for enforcement action to the UK > >>>> Government reporting centre. > >>>> > >>>> 73 Dave G4AON > >>>> __ > >>>> Elecraft mailing list > >>>> Home:http://mailman.qth.net/mailman/listinfo/elecraft > >>>> Help:http://mailman.qth.net/mmfaq.htm > >>>> Post:mailto:Elecraft@mailman.qth.net > >>>> > >>>> This list hosted by:http://www.qsl.net > >>>> Please help support this email > >> list:http://www.qsl.net/donate.html > >>>> Message delivered topete.n...@gmail.com > >>> __ > >>> Elecraft mailing list > >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >>> Help: http://mailman.qth.net/mmfaq.htm > >>> Post: mailto:Elecraft@mailman.qth.net > >>> > >>> This list hosted by: http://www.qsl.net > >>> Please help support this email list: > >> http://www.qsl.net/donate.html > >>> Message delivered to je...@tr2.com > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to w8lv...@gmail.com > > > > -- > > > > --w8lvn-- > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to b...@bobkehr.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 236, Issue 8
I disagree. There is the knowledge base which is likely missing. Not to mention unique test fixtures and spare parts required. Spare parts means inventory of replacement boards. One can not effectively or economically do component level troubleshooting with these radios. It is less expensive to build and replace a board than pay a good tech a few hours for troubleshooting. As the say, "I've been there, and I've done that". 73 Bob, K4TAX On 12/15/2023 11:57 AM, elecraft-requ...@mailman.qth.net wrote: Message: 9 Date: Thu, 14 Dec 2023 13:57:33 -0500 From: Pete Smith N4ZR To:elecraft@mailman.qth.net Subject: Re: [Elecraft] User's Dilemma Message-ID:<663c713a-1470-403d-ac80-bd259c84e...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed If they were starting from scratch, I'd agree, but there are currently-operating independent technicians out here who could be up and running relatively easily. 73, Pete N4ZR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] User's Dilemma
I can totally agree with Joe, W4TV. At one time I was repairing radios for various companies. I was doing warranty and non-warranty repairs. The companies decided it was cost ineffective to maintain independent repair services. Hence, I no longer repair radios, and no longer have test equipment to do so. There were other reasons as well, but I agree with Joe, W4TV, the expert knowledge base is in Watsonville. 73 Bob, K4TAX On 12/15/2023 11:57 AM, elecraft-requ...@mailman.qth.net wrote: Message: 5 Date: Thu, 14 Dec 2023 13:03:23 -0500 From: "Joe Subich, W4TV" To:elecraft@mailman.qth.net Subject: Re: [Elecraft] User's Dilemma Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed They clearly aren't interested in setting up a third party repair center. Given the cost of setting up and running a second "factory warranty/repair center" it just doesn't make sense. Notice that none of the other radio manufacturers offer duplicate facilities on the east/west coast ... even those that did so at one time have pulled back. The cost of facilities, duplicate test equipment, duplicate spare/repair parts, etc. simply can not be amortized economically across one or two technicians. It's far more efficient to simply add another technician or two (*IF* one can find a qualified tech) "at the mothership". 73, ... Joe, W4TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Noise from KAT500?
The KPA500 at the station only matches the transmitter to the transmission line and likewise for the receiver. It does not change the match between the antenna and transmission line, thus the SWR and related loss from SWR remains. 73 Bob, K4TAX On 12/4/2023 8:07 AM, elecraft-requ...@mailman.qth.net wrote: To me, it sounds like that when the ATU is inline (& I presume you let it tune to that antenna at some point.? Yes/No?) The antenna is better matched to the transmission line, so more of the on-air "ambient" noise is delivered to the RX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 2M amp
I use an external VHF amp with my transverter. Works great! Do be mindful of the amp switching time. The relay switching time is about 15 ms. I prefer to use hardwire PTT as opposed to using RF detection to switch the amp. 73 Bob, K4TAX On 12/4/2023 8:07 AM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Sun, 3 Dec 2023 09:37:09 -0700 From: Steve McKee To:elecraft@mailman.qth.net Subject: [Elecraft] KX3 2M amp Message-ID: Content-Type: text/plain; charset="UTF-8" Hello, I?ve have the 2 meter module in my KX3, and am wondering if I can hook a small VHF amplifier to it, to increase power output?? I?m planning on purchasing the KXPA 100 for the HF side?. Course these are both for in home use, not in the field?QRP in the field? Thank You, 73?s __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 236, Issue 2
There are many very nice, well filtered, well regulated power supplies on the market. I see NO REASON for using anything other than the station power supply to power all accessories. As to plant lights, use a separate power supply and not the piece of junk supplied with them. I have and use two switch mode supplies for all of my station equipment. That encompasses two 100 watt transceivers an a 150 watt VHF amp. From 160M - 2M I have ZERO noise from either or from both of these supplies. Frequently I am running two radios on 2 different bands at the same time. Jim, K9YC, has very strong merits in that each and every piece of equipment MUST be bonded to a single common point. I use the station power supply for my single common bonding point. I DO NOT use an external dedicated ground as it would be 35 ft in length and serve as an antenna to pick up noise. After all, that is 1/4 wavelength on 40M. As to what's in the neighborhood, that's another issue out of my control. 73 Bob, K4TAX On 12/3/2023 9:52 AM, elecraft-requ...@mailman.qth.net wrote: Message: 14 Date: Sun, 3 Dec 2023 05:19:39 + From: Bill Johnson To:"j...@audiosystemsgroup.com" , "elecraft@mailman.qth.net" Subject: Re: [Elecraft] Noise from KAT500? Message-ID: Content-Type: text/plain; charset="us-ascii" It gets worse with all the new gadgets and LED lighting. I just installed new plant lights, LEDs, and the racket from the wall warts is terrible. I shut them off when operating, or not interested in lighting up the plants. Terrible view of the noise on K4 graphic display. Bill K9YEQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Noise from KAT500?
Just power it from the transceiver power supply and all will be resolved. There is no point in making life complex. 73 Bob, K4TAX On 12/3/2023 9:52 AM, elecraft-requ...@mailman.qth.net wrote: Message: 8 Date: Sun, 3 Dec 2023 01:48:45 + From: W2HX To: Michael Carter, Elecraft Reflector Reflector Subject: Re: [Elecraft] Noise from KAT500? Message-ID: Content-Type: text/plain; charset="utf-8" Mike, K8CN wins the cigar! The issue is the power supply ? I took some spectrum analyzer plots to 7 MHz and you can see what I saw. The set up is spectrum analyzer -> KAT500 -> Dummy Load. First picture are two "max hold" traces superimposed where the problem can be seen. https://w2hx.com/x/Elecraft/KAT500/Noise-Issue/KAT500-AC-Power.png The "lower" trace is what I saw with the kat500 in bypass. The "top" trace is with the kat500 inline (auto or manual). I then replaced the wall-wart power supply with a 12V battery. And this is what I saw for BOTH bypass and inline. Clearly the problem. https://w2hx.com/x/Elecraft/KAT500/Noise-Issue/KAT500-battery.png using a battery, the noise is about -80 dBm. Using the wall-wart, in some cases the noise is as high as -60 dBm My task now is to either leave it on battery or preferably, find a low noise PS. Thanks everyone for the ideas. 73 Eugene W2HX Subscribe to my Youtube Channel:https://www.youtube.com/@w2hx/videos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Duty Cycle of FT8 #Elecraft
The complete FT-8 cycle is 30 seconds of which 12.63 seconds is the actual transmitting period. Therefore (12.63/30)*100 = 42.1%. As to backing down the power, the measured performance on my KPA500 indicates the highest dissipation does occur at lower power levels. On 20M at 500 watts output the dissipation is 368.0 watts for an efficiency of 57.6%, while at 200 watts the dissipation if 388.7 watts for an efficiency of 34.0%. I've concluded, with my KPA500, reducing the output power is not advantageous with regard to amp performance. Based on published data in the manual, the duty cycle at 500 watts is 100% for 10 minutes, and 5 minutes of standby. Applying the same concept, then (10/15)*100 = 66.6%. Clearly FT-8 at 500 watts output is well below the duty cycle rating of the KPA500. I suggest one do the same measurements for the KPA1500 and find out what the real numbers might be and publish the results. To be fair, one needs an accurate power meter and a known good 50 ohm resistive load and a little math. 73 Bob, K4TAX On 11/13/2023 8:03 AM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Fri, 10 Nov 2023 09:27:18 -0500 From: Pete Smith N4ZR To:ws...@groups.io, Elecraft List Subject: [Elecraft] Duty Cycle of FT8 #Elecraft Message-ID:<261a35c3-7996-433a-833a-b0a1e7cb2...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed I started operating FT8 while my KPA-1500amp was out for repair.? Now it's back and raising a question: Operating with just my K-3, set at 100 watts, I would see 100 watts indicated on its meter through the whole 15-second FT8 transmission..? When I drive my amp, it only needs 30 watts for full CW power (on 24 MHz),? but the amp indicates 1200 watts input for the whole FT8 transmit cycle.? I'm wondering if I should back off to protect the amp,considering the duty cycle is so high - on the other hand, the temperature reading profile of the amp seems to be pretty much the same as on CW. 73, Pete N4ZR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S Split Operation
Not only does one have to return the QSL cards, but they must turn in their EXTRA Class license for a Technician Class license. 73 Bob, K4TAX On 11/6/2023 2:36 PM, elecraft-requ...@mailman.qth.net wrote: I wonder how I can work split then on my K3/10 without a 2nd RX...do I have to return the QSL cards? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S Split Operation
SPLIT operation is easily accomplished with a single receiver K3S. Five easy steps follows: 1. Select the band, frequency and mode of your choice as seen on VFO A. (that's the big knob) 2. Press and release A > B button. This sets VFO A and VFO B to the same band, frequency and mode. 3. Press and hold A > B. Upon release of A > B button one is now in the SPLIT mode. You will observe the word "SPLIT" just above the VFO B frequency (right side) and TX above the letter B for VFO B . 4. Adjust VFO B for the desired TX frequency. (use the small knob) 5. VFO A is the receive frequency. That's it. 73 Bob, K4TAX On 11/6/2023 2:36 PM, elecraft-requ...@mailman.qth.net wrote: Message: 8 Date: Sun, 5 Nov 2023 21:12:15 -0500 From: Richard To: Elecraft Reflector Subject: [Elecraft] K3S Split Operation Message-ID: Content-Type: text/plain; charset=utf-8 I am having trouble understanding both the manual and N6FN?s Mini-manual when it comes to Split operation. I follow the ?directions? over and over but nothing happens. Does the fact that my K3S does not have a sub receiver mean that I can?t work split? If I?m wrong about that I would really appreciate a step-by-step How-To lesson in working split. Thanks. Cheers, Richard Kunc W4KBX - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Digital mode power handling for KAT3
If I did my math correct, FT-8 is 46.42% duty cycle. 13+15 = 28. Therefore (13/28)*100= 46.42% 73 Bob, K4TAX On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote: Message: 17 Date: Wed, 11 Oct 2023 21:40:19 -0700 From: David Gilbert To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Digital mode power handling for KAT3 Message-ID: <53d23883-e9e2-451d-cb5e-38e78b991...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed FT8 is definitely full duty cycle for its 13 second transmit period, but of course then it is idle for the last two period and idle for the 15 seconds it is receiving. Dave?? AB7E __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 234, Issue 3
Ken et al: From the K3S manual, page 8, I find: "Duty Cycle CW and SSB modes, 100% 10 minutes key-down at 25 degrees C. There are some additions restrictions for 6 meters. This does not seem to agree with the information of W1HKJ. I've been regularly running my K3S, s/n 10163 since 8/2015 at rated output, 100 watts, on all modes, SSB, CW, FT-8, and a couple of others with out any issues or concerns. I also run the power supply voltage at 14.5 at the radio during transmit and 14.8 during receive. 73 Bob, K4TAX On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote: Message: 16 Date: Wed, 11 Oct 2023 23:20:47 -0400 From: Ken WA8JXM To: ken.k...@gmail.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Digital mode power handling for KAT3 Message-ID: Content-Type: text/plain; charset="UTF-8" Not just the tuner, the K3 is not rated for full power on 100% duty cycle modes. Just like it's not rated or 100% key down CW. But realize that many of the modes are half transmit and half listen. Different digital modes have different duty cycles. >From the W1HKJ.com website: 100% duty cycle: Olivia, MFSK,RTTY 80%: BPSK, MT63 44% CW 22%:FieldHell There are more modes on Dave's website, but those are some of the major ones. IDK if Joe Taylor has similar information on his website for the modes he supports. It loioks like his modes may require full duty cycle. Ken __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 / KAT500 and W2 watt meter question
Andy: With my K3S station I use the AUX cable system between the K3S connected to the KAT500 and then connected from the KAT500 to the KPA500. No interrupter is needed. The AUX lines handles the proper control for the tuner and the amp. I do NOT use the Key Line cables, sometimes called PTT, to handle T/R switching. Correctly configured, the K3S is set for 20 watts TUNE power and Power Per Band, as required. I find no need for multiple methods. My general philosophy is; "more connectors, more cables equal more problems". KISS In the KAT500 manual, page 5, Figure 1 Cabling Diagram, is the better and safer way to configure the system. NO key line interrupter is needed. As to the Kenwood, I have no knowledge of the system. 73 Bob, K4TAX On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote: Message: 15 Date: Wed, 11 Oct 2023 23:02:09 + From: Andy Durbin To: "elecraft@mailman.qth.net" Subject: [Elecraft] KPA500 / KAT500 and W2 watt meter question Message-ID: Content-Type: text/plain; charset="iso-8859-1" "I just ordered the KPA500/KAT500 combo and W2 watt meter for my K3S. Should I use the key line interrupt connected to the W2 watt meter or should I connect the key line interrupt to the KAT500? Do I even need to use key line interrupt with the K line set up?" Why would it hurt to have multiple ways to inhibit KPA500 keying? I run a Kenwood rig so no AUXBus control but my KPA500 key line passes through my LP-100A and through a SteppIR inhibit circuit. Both can open the key line. In addition my station controller can assert KAT500 key inhibit by serial command. KAT500 key line inhibited is my default condition. I only allow the key line to be enabled if several critical checks have passed. (e.g. KAT500 frequency, KPA500 band selection, Kenwood drive power setting.) I'll do anything I can to avoid being on the list of people who fried their KPA500. I can fix stuff but I'd prefer to chase DX. 73, Andy, k3wyc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Digital mode power handling for KAT3
Ken: I have a K3S with the internal tuner. I find no issues nor concerns in running 100 watts in any mode. Page 79 of the manual does not address any reduced power requirement other than operating with a 20:1 SWR (20 watts). 73 Bob, K4TAX On 10/12/2023 7:33 AM, elecraft-requ...@mailman.qth.net wrote: Message: 7 Date: Wed, 11 Oct 2023 12:50:38 -0400 From: To: Subject: [Elecraft] Digital mode power handling for KAT3 Message-ID: <06cf01d9fc63$10461310$30d23930$@gmail.com> Content-Type: text/plain; charset="us-ascii" Hello. I recently bought a very nice K3 from a friend. It has the KAT3 auto-tuner installed. Due to the duty cycle of most digital modes, most, if not all, external auto tuners are "de-rated" for digital modes. I haven't been able to find any reference to this for the KAT3. Does anyone know the power handling capability of the KAT3 for digital modes? Thanks in advance. 73, Ken, KJ9B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 / KAT500 and W2 watt meter question
Glenn: In the KAT500 manual, page 5. Figure 1 Cabling Diagram is the better way to connect the items. It does not use the key line interrupt. That is the configuration which I have used, very successfully, for years. In the K3S, set the MENU for 20 watts TUNE power, and from the CONFIG menu PWR SET to Per Band. 73 Bob, K4TAX On 10/10/2023 7:18 AM, elecraft-requ...@mailman.qth.net wrote: Message: 23 Date: Tue, 10 Oct 2023 05:17:26 -0700 From: Glenn Maclean To: elecraft@mailman.qth.net Subject: [Elecraft] KPA500 / KAT500 and W2 watt meter question Message-ID: <3a0e28e4-8411-4394-a880-0fec58bf3...@att.net> Content-Type: text/plain; charset=us-ascii I just ordered the KPA500/KAT500 combo and W2 watt meter for my K3S. Should I use the key line interrupt connected to the W2 watt meter or should I connect the key line interrupt to the KAT500? Do I even need to use key line interrupt with the K line set up? Thanks in advance Glenn WA7SPY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft] Behringer XM1800S Mic
Be sure the wiring is correct as to the XLR 3 and the Foster 8 pin connector. XLR pin #1 to Foster pin #8 XLR pin #2 to Foster pin #1 XLR pin #3 to Foster pin #7 Be sure in the Config menu, FP.H source is selected and Bias is OFF. See page 13 in the manual. I use a Behringer XM8500 or Shure SM-58 very successfully. Both sound good but a bit different. 73 Bob, K4TAX On 9/28/2023 8:31 AM, elecraft-requ...@mailman.qth.net wrote: Message: 15 Date: Wed, 27 Sep 2023 13:29:16 + (UTC) From: E-mail-Server To: "elecraft@mailman.qth.net" Subject: [Elecraft] Behringer XM1800S Mic Does not work on k3 Message-ID: <1663567528.2454337.1695821356...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Im trying to connect the Behringer XM1800S as an external mc on my K3. I have tried all of the configurations possible in the MAIN menu with no joy.? Before I break down ( and suffer my XYL's consternation) to buy a compatible Heil product, does anyone have any suggestions?? I have the same setup I am trying to use on a Heil proset with no issues.? I suspect the mic is the primary issue since it is not an electret mic. Any suggestions are appreciated. PatAB8PS(former W8LNO) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Yamaha CM500
I have the Koss SB-45. Works great and sounds good both ways although I don't normally use a headset. I do find, as I recall, it has a dynamic mike element and does exhibit a good amount of proximity effect. Uh, maybe that is the SB-40. One is dynamic and one is electrect. ??? 73 Bob, K4TAX On 8/7/2023 6:10 PM, elecraft-requ...@mailman.qth.net wrote: Message: 21 Date: Mon, 7 Aug 2023 16:26:07 -0600 From: David Herring To: Elecraft Forum Cc: Henry Pfizenmayer Subject: Re: [Elecraft] Yamaha CM500 Message-ID:<50f2d6d7-ec32-413b-98dc-1e7ddbe2c...@gmail.com> Content-Type: text/plain; charset=utf-8 I have been told that the Koss SB-45 is the replacement for the Yamaha CM500. I have not as yet ordered a pair to try them myself, I am merely relaying what I have heard. Might be worth researching if anyone?s looking for a CM500 replacement. I see there is a pair on Amazon for about $30 presently? 73, Dave - N5DCH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] A dumb question about lightning
Fred is absolutely correct on this point. The NEC {National Electrical Code} clearly states that all driven grounds MUST be bonded to the AC mains service entrance ground. There is NO exception to this procedure. An exception does exist when the structure is XX number of feet distant from the AC mains service. (I forget the distance number). In general, your station ground must be bonded to the AC mains ground. Otherwise, your equipment is in the current path between two or more different ground points. Even with antennas disconnected or grounded, and the station turned off, the path of least resistance between the two grounds is through your equipment. That will definitely let the smoke out of the box. Not good. Please deal with science and facts. DO NOT rely on "old ham lore" that is most likely incorrect and gets more and more incorrect with the telling or writing. 73 Bob, K4TAX Message: 20 Date: Mon, 31 Jul 2023 13:20:06 -0700 From: Fred Jensen To: Geoffrey Feldman Cc:elecraft@mailman.qth.net Subject: Re: [Elecraft] A dumb question about lightning Message-ID:<87985aa1-b606-cec8-f07c-5edbadbdc...@gmail.com> Content-Type: text/plain; charset=utf-8; format=flowed Be very careful of advice regarding lightning protection.? There are some very good sources, starting with the NEC and including material from ARRL.? Some is somewhat non-intuitive.? For example, the NEC requires that any additional "earth electrodes" [aka ground rods] be bonded to the service entrance earth electrode with a low inductance path. There's been quite an array of advice circulating here recently, much of it wrong, some dangerous. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] A dumb question about lightning
No such thing as a dumb question about lightning. I spent 15 years in South Florida. I've seen some lightning! Welcome to KY. I'm in middle TN and do understand lightning. The ARRL publication by Ward Silver, Grounding and Bonding for the Amateur, is about the best compilation available and understandable. Three points I consider as mandatory: (A) All efforts for lightning protection should be implemented outside of the house. Never inside. (B) All driven station and tower ground rods must be bonded together and back to the AC Mains ground outside of the structure. (C) Each piece of equipment should be bonded to a common point such as the station power supply , using dedicated bonding jumpers. All efforts are toward mitigation of lightning damage. 73 Bob, K4TAX On 7/28/2023 4:14 PM, elecraft-requ...@mailman.qth.net wrote: Message: 19 From: Al Lorona To: Elecraft Reflector Subject: A dumb question about lightning Please don't laugh at me; I'm a transplant from a region of the country with essentially no lightning to a region where you have to worry about it quite a bit. We had a doozy of a storm last night, with lots of lightning overhead. I felt like a sitting duck, even though I had grounded both sides of the balanced feedline of the antenna, switched the antenna switch to the middle (grounded) position, and even disconnected the coax leading to the K3's rear-panel antenna port. Whenever lightning happens, I always wonder if it really is in fact better to ground everything. Because, doesn't that essentially make a lightning rod of the antenna? If I simply disconnected the antenna and left it floating, wouldn't it be less likely to attract a lightning bolt? I'm of the belief that it's better to try to avoid a direct hit than to attract one and trust your grounding system to do its thing. I'm of the belief that no grounding system is perfectly effective. Al? W6LX/4 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Power hunting on FT-8
Whereas it was written: "The manufacturer says use 5 bars of ALC, end of story. I don't buy that at all." (W3IP) The manufacturer DOES NOT say use 5 bars of ALC. However, it does say use 4 bars of audio as displayed on the ALC scale and the 5th bar flickering. This is per the writer of the ALC routine. This prevents power hunting. The actual Automatic Level Control (ALC) starts AFTER the 5th bar. 73 Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Power-hunting on FT8
Oh my goodness! What Don, W3FPR wrote is 100% correct! Whomever K3 user told you to EVER use the output control other than MAX at ALL TIMES needs to go back to learning. They are NOT helping you. (NK7I) I'd go back to what Elecraft says in their manual. (K9YC) Again, READ THE K3 OWNERS MANUAL and do what the manufacturer says. (W4TV) What "others" told is frankly just OLD HAM LORE. The more it is told the more incorrect it becomes. There is a correct or right way, and there are many incorrect or wrong ways. I don't find any in between. Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Is KX3 going obsolete
AMEN Just keep on keeping on. 73 Bob, K4TAX On 7/18/2023 11:43 AM, elecraft-requ...@mailman.qth.net wrote: Good grief.? Get a life.? Not everything in this world is racist, discriminatory or homophobic. In fact, I'm old enough to remember when being discriminating was a virtue, a sign of good taste; gay was happy and binary was a number system.? But then I'm an elderly heterosexual white male, so what do I know? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Field Day Operation
Folks, if you intend to operate ANY digital mode for Field Day or any other day for that matter, please read the radio manual with regard to passing audio from the computer to the radio and learn the radio adjustments and what they do and how they are used. Also read the manual regarding correct configuration of the computer and application software. One must understand at least 3 different systems. (a) the radio adjustments, (b) the computer operating system, (c) the software application. Yes, ANY radio incorrectly configured and adjusted WILL TRANSMIT CRAP! Don't be laughed at and called a LID. RTFM There is absolutely NO reason for transmitting a dirty or distorted or wide signal. NONE! If your signal is dirty, distorted, or wide, it is clearly the fault of the operator. 73 Bob, K4TAX On 7/12/2023 3:33 PM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Sat, 8 Jul 2023 15:18:13 + Subject: Re: [Elecraft] Field Day Operation "but I guarantee that it can be easily done with a TS-590S as well. You just didn't do it right." Ok, please tell me how to do that. Specific settings please from a test that you actually ran with a TS-590S. My tests had all audio drive sliders to max and ALC meter hard on the stop. Clean signal for FT8 and PSK. I didn't believe that was possible until I ran the tests. Andy, k3wyc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3s Receive EQ
Regarding "quick on the fly adjustments", I don't view an 8 band EQ as one that would have quick on the fly adjustments. Depending on your choice of sidetone frequency, the selection of RX EQ frequency and amount of attenuate and boost would seem adequate. I agree with what Jim, K9YC, says about this. In order, attenuate first and boost last. There is less phase distortion. 73 Bob, K4TAX On 6/26/2023 8:13 AM, elecraft-requ...@mailman.qth.net wrote: Message: 20 Date: Mon, 26 Jun 2023 02:05:33 -0400 From: Richard To: Elecraft Reflector Subject: [Elecraft] K3s Receive EQ Message-ID: Content-Type: text/plain; charset=utf-8 I love my K3s, warts and all, but I want a way to tailor incoming audio for better readability in special cases. Yes, I know about the built-in function, but that's hardly comfortable for quick, on-the-fly adjustments. Can you recommend/suggest an outboard equalizer, ideally 8 bands, that can be used to tune the headphone audio only? 1. This unit would be entirely external to the K3s, so its output level would have to be sufficient to drive headphones. 2. This unit would ideally be 9" by 9" maximum and 8" by 5" minimum, dictated by the available placement space in my station. There?s lots of wiggle room here. 3. 12 volts DC is available to power it. 4. An in/out (inline/bypassed) switch is essential. Links to look at would be great. Fingers crossed ? VISA paid up and ready to rock and roll. Cheers Richard Kunc W4KBX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS8Call Eureka
Regarding using USB mode, if you have any EQ or processing applied, it will also be applied to the data signal on transmit. It is best to use the Data/Packet mode on the radio because that mode automatically negates any EQ or signal processing. Plus it is always generates the signal in USB for all bands. The data convention is always USB regardless of band. 73 Bob, K4TAX On 6/5/2023 9:58 AM, elecraft-requ...@mailman.qth.net wrote: Message: 6 Date: Thu, 1 Jun 2023 06:33:29 + (UTC) From: Karl W Hubbard To: Elecraft Reflector Subject: [Elecraft] FS8Call Eureka Message-ID:<1369509914.5056040.1685601209...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Incredibly, I have stumbled, bumbled, and fumbled my way to get JS8Call to provisionally work on the KX3. It is the equivalent of trying to sight your rifle in and finally getting your shot on the paper after using up nearly all your ammo. From there you can fine adjust your scope, ie., you now have something to work with. My break through came after watching Dummyload's You Tube video '"Connecting the KX3 to the SignaLink." At the end he mentioned that the ICOM 7200 didn't need a SignaLink which made me deduce that the KX3 would for JS8Call. That and after all the endless permutations and combinations of different settings.? I set my mic bias to "off", the ptt to on, and the AFX to "off" and made the cable connections as he suggested in his very concise video. My SignaLink transmit and receive settings arbitrarily were both dialed? to @11:00 and the Delay to 7:00.? The other issue was setting my Lenovo computer audio and speaker sound cards? to CODEC which is the generic one used for most Windows 11 computers I think. Interestingly, I did not select the KX3 rig option? from the drop down menu. I left it blank!? On the KX3, I set the mode to USB. Hurriedly scribbled this all down.? Hopefully I can get it all to work again tomorrow and to lock this in. Merry 73's to all, and to all a goodnight! Karl, AF5LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] JS8call
When switching to Data/Packet be sure the radio RX BW is 2.7 kHz. The BW info is stored by mode in the radio. On WSJT-X Wide Graph, set the Bin/Pixel value to 4. 73 Bob, K4TAX On 6/5/2023 9:58 AM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Wed, 31 May 2023 12:53:32 -0400 From: David Haines To:elecraft@mailman.qth.net Subject: Re: [Elecraft] JS8call Message-ID:<6147a9fa-5f90-edca-e8a0-5b8e7968c...@bates.edu> Content-Type: text/plain; charset=UTF-8; format=flowed After years of success with FT8 here's a puzzle I've never solved: For FT8 when I set WSJT-X radio settings to Data/Pkt, the WSJT-X waterfall display seems useless, with all the signals concentrated at the center of the waterfall. For that reason I always set WSJT-X to USB and get a useful waterfall.? Why does this happen and am I missing something? david KC1DNY KX3? and now a brand new KX2. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Odd K-3 Symptom
Pete: (a) Check all PL-259 connectors are more than finger tight. I use a pair of 4" Channel Locks to snug mine. Solves many problems. (b) Make sure all RF coax antenna cables have proper common mode chokes. This depends largely on the type of antenna and where best to install the chokes. (c) You may need to add some common mode chokes on various cables to and from the computer. (d) Each piece of station equipment should be bonded to a common point, using a dedicated bond jumper. A don't advocate using the daisy chain method but prefer the star bonding method. 73 Bob, K4TAX On 5/29/2023 8:45 PM, elecraft-requ...@mailman.qth.net wrote: Message: 12 Date: Mon, 29 May 2023 07:54:54 -0400 From: Pete Smith N4ZR To:elecraft...@yahoogroups.com, Elecraft List , "n1mmloggerp...@groups.io" Subject: [Elecraft] Odd K-3 Symptom Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed During the WPX CW contest, I was having some trouble with RF getting back into my K-3 from my KPA-1500, displaying HI RF warnings and magically adjusting my audio gain after each transmission.? Tightening ground connections effectively solved? the situation, but during the last few hours, I started noticing ERR PTT warnings very briefly after each transmission.? I was using N1MM Logger+ to control PTT, and have just confirmed that this error only occurs when N1MM is controlling PTT.? Any ideas? -- 73, Pete N4ZR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] N6TV Product Announcement - new "K-ON" plugin for K3, K3S, and K4
Thanks to circuit design help from K9JB, and after review by Elecraft Chief Engineer, N6KR, I'm now able to provide a new plugin module for the Elecraft K3 and K4 that I call the "K-ON". When connected to the rig's ACC jack directly, or via a 15-pin Y-cable or Y-BOX <https://bit.ly/Y-BOX>, the rig will automatically power up whenever the rig's DC power supply powers up. This could be useful to remote stations with Internet-accessible AC power strips. I also find it useful at my home station where I use a "Master Power On" switch that powers everything up automatically, including two K4Ds. If you already have a Y-BOX with an unused connector, the K-ON plugs right in. I'm also including the same circuit inside the new Y-BOX v4.0 (so the plugin is not needed). The "Auto On" feature of Y-BOX v4.0 can be enabled or disabled by a shortened RCA plug, as shown in the third demo video on the website. For photos, demo videos, and ordering one or more K-ON plugins, please visit the new website. https://bit.ly/N6TV-KON Unlike some solutions that have previously been suggested, such as connecting a big capacitor to ACC Pin 8, connecting the K-ON plugin has no surprise side effects. The rig's POWER switch and PS0; commands continue to function normally, so the rig shuts down properly while the module remains connected, as shown in the videos. You can still connect a RemoteRig box in parallel with no issues either; it will still function normally. 73, Bob, N6TV https://bit.ly/N6TV-KON https://bit.ly/Y-BOX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Where to put the wattmeter
While I totally agree with Alan, N1AL, I fear that one who is reading an external power meter located in the feedline after the tuner will be mislead by the power indications. At the same time, SWR indications are typically valid. Case and point. On one of my antennas, on a frequency where the SWR is high, the FWD power indicated on the external meter is 200 watts. No way the radio is producing 200 watts. At the antenna matched frequency the external meter indicates 100 watts. The original post indicated with the OPs K3S the P3 Sensor located after the KAT500 antenna tuner was showing a power value of some 300 watts or so. Even more non believable values with his KPA500. Thus my reason for questioning the position of the measuring sensor in the feed line. Most power measurement devices are calibrated for a known impedance, normally 50 ohms. Therefore placing them in the feedline where an unknown impedance exist, one will also have a false power indication. Exceptions are a calculating power meter that measures both voltage and current to determine power. Most power meters I find in ham usage are only voltage sensing devices. That's all. 73 Bob, K4TAX Date: Mon, 10 Apr 2023 10:03:10 -0600 From: Alan Bloom To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Where to put the wattmeter Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed I changed the Subject line since this is a new topic. If the wattmeter (in this case the P3 sensor) is placed after the tuner then it will read the SWR of the antenna.? To determine the net forward power, just subtract the reflected power from the forward power. To calculate reflected power, use the equation: P(ref) = P(fwd) * [(SWR-1)/(SWR+1)]^2 Since the K3 and K4 already have a built-in wattmeter located before the tuner, it makes sense to me to put the P3 sensor (or external wattmeter) after the tuner so you can see what is going on with the antenna. Alan N1AL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 woes - repaired but now claims my K3s, puts out 873W!
My question would be "where is the sensor for the P3 located in the feed system?" It should be between the KPA500 output and the KAT500 input. Therefore, when the KAT500 resolves a match, then the line between the KPA500 output and KAT500 input is nominally 50 ohms. If the sensor is located after the KAT500, thus in the feedline to the antenna, the impedance and thus the voltage on the line, will impact the the indicated value. Most all power reading sensors are voltage reading devices, referenced to 50 ohms nonreactive and should be located in a 50 ohm line which has a nonreactive load. Most power indicating devices are calibrated for 50 ohms. There are some exceptions. As example; if the impedance of the antenna is reactive ( most are ) and about 200 ohms Z being fed though 50 ohm coax for the feedline and the power is 500 watts, the voltage is about 316 volts. If the impedance were 50 ohms and the power is 500 watts the voltage would be about 158 volts. Here it is easy to see, using a voltage sensing circuit, the power indication would be incorrect by some significant magnitude. I've considered adding a power/SWR monitor to my P3 but it would be in the coax to the antenna. I use the internal tuner in my K3S to resolve a match, thus the power measurement would be after the ATU in the radio and the actual load Z is really unknown. The only way to determine if the power indication is correct with the P3 is to use a 50 ohm dummy load or place it in the RF path which is 50 ohms nonreactive. 73 Bob, K4TAX Message: 2 Date: Fri, 7 Apr 2023 16:15:31 -0600 From: Alan Bloom To: Elecraft Reflector Subject: Re: [Elecraft] [P3] P3 woes - repaired but now claims my K3s puts out 873W! Message-ID: <3fbef504-357c-f46e-748f-d11e1a822...@sonic.net> Content-Type: text/plain; charset=UTF-8; format=flowed Hi Dave, There is a "SensorCal" entry in the Transmit Monitor Menu, but I don't think it has enough range to correct such a large error. There is also a "MtrScale" entry to set the full-scale power on the meter display.? Does the reading change when you change the scale? In addition to the I/O board, the problem could also be on the Sensor board (the small board that connects the sensor RJ45 connector to the I/O board).? If one of the resistors on this board went open or shorted it could cause a power error.? Is the reverse power reading way off as well?? (i.e. does the SWR read wrong for SWR not close to 1:1?)? If so, that could be due to a resistor problem on the Sensor board. > I'm wondering if the new revision I/O board is somehow incompatible with the older TX Monitor board, No I don't think so.? There was a minor change in the sensor design at one point but it was just a capacitor change to improve the detected bandwidth so the envelope would display correctly.? (The same sensors are used for the W2 wattmeter.) 73, Alan N1AL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Mysterious T
Page 12 in the manual states; "T indicates FM/Tone, CW/DATA text decode, or AM-Sync auto-tracking." 73 Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft 80M SSB Net Report
Regarding some of the net and QRM issues mentioned in the attached post, the ARRL Volunteer Monitor organization can easily deal with deliberate interference to nets. Remember, NO ONE or NO ORGANIZATION owns any frequency on any band. Likewise, hams who have a Tech or General class license are very easy hunting when operating in the Advanced or Extra frequency segment of any band. A good operator, selecting 3 kHz above or below any net is good operating practice. For those that insist on transmitting wide band audio, do so at your on risk. 73 Bob, K4TAX On 1/30/2023 12:30 PM, elecraft-requ...@mailman.qth.net wrote: Message: 23 Date: Mon, 30 Jan 2023 12:30:17 -0600 From: "Dave New, N8SBE" To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Elecraft 80M SSB Net Report Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed Steve, Yeah, we got chased away from 3775 by a persistent adjacent GA net meeting at the same time on 3778. You'd think we could co-exist, but one station in GA on there insisted on overdriving his amplifier causing splatter +-5 kHz either side of what should have been a nominal 3 kHz-wide channel. Rather than start a cat-fight on the air (or by email) we decided the batter part of valor was to move elsewhere. 3784 kHz has been good for us the last several weeks, but last night at least a half-hour before our net time, there was a conversation going on there between two stations, one of which was signing an "F6" (France) call sign, so my guess is they were speaking French, which is not my forte, by any stretch of the imagination. It turned out that 3781 was clear, and remained so for us, so we moved down 3 kHz and operated the net there. I've been using (mis-using?) Netlogger, and when I start up the net, I post the current frequency, so if you go to the Netlogger site during net time, you should be able to find us quite easily. I'd really like to move us into the General portion of the band, so more folks can join in, but that's a tough job on 80 meters, even on a Sunday. Generally that portion of the band is wall-to-wall with nets and scheduled conversations (old friends, etc) during the evening hours all days of the week. The ARRL net directory is not very friendly for searches, like "what frequencies are NOT in use in the General portion of the band on Sundays at 9pm ET". Suggestions for how to solve that mystery are welcome (I do have a P3, and know how to use it, just to head off the more obvious replies). 73, -- Dave, N8SBE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Diversity
I have both a Flex 6600 and Apache Labs Anan 7000. Both of them do diversity, though the Apache Labs handles it by far the best. I don't have a K4 to compare to them with. Bob NN5D __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Diversity
I have both a Flex 6600 and Apache Labs 7000. Both of them do diversity, though the Apache Labs handles it the best. I don't have a K4 to try. Bob NN5D On Mon, Jan 16, 2023 at 12:00 PM Dale Boresz wrote: > Steve, > > AFAIK, only the FLEX radios with TWO SCU's (2nd IDENTICAL receiver) offer > diversity reception. That would include the old FLEX-5000 with the 2nd rx; > the FLEX 6600; and the FLEX 6700 (and maybe the 6500 - don't remember) . > The other FLEX radios support 'dual-watch' on a single rx ('SCU' for FLEX), > just as the Elecraft KX3 (and probably the KX2) does. That is certainly > convenient for split operation in pileups, but it is not > diversity reception. > > 73, > Dale - WA8SRA > > > > On Mon, Jan 16, 2023 at 11:04 AM VE6WZ_Steve wrote: > > > No. This is not correct. > > > > The FLEX series of radios can do true stereo diversity. > > > > Steve, ve6wz. > > > > > On Jan 16, 2023, at 5:58 AM, Victor Rosenthal 4X6GP < > k2vco@gmail.com> > > wrote: > > > > > > It seems to me that the only commercially available ham transceivers > > that support true diversity reception are the K3 and K4. > > > Is that correct? > > > -- > > > 73, > > > Victor, 4X6GP > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to dmbor...@gmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to nn5d@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA1500 Faulting for High SWR inappropriately
Use an antenna analyzer to determine the actual complex antenna impedance. I've always viewed SWR as more of a hocus pocus value, easy value to obtain, but very broad in definition as it is a ratio between two impedance, both usually unknown. Chances are the antenna or a connector or feed line or lightning protection device is breaking down under power. The SWR meter won't show this. 73 Bob, K4TAX On 12/19/2022 4:55 PM, elecraft-requ...@mailman.qth.net wrote: Message: 19 Date: Mon, 19 Dec 2022 20:59:21 + From: "David F. Reed" To:"elecraft@mailman.qth.net" , kpa1...@groups.io Cc: Elecraft Support Subject: [Elecraft] KPA1500 Faulting for High SWR inappropriately Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed My KPA1500 has started faulting inappropriately for High SWR. I say inappropriately because all 2 of my SWR meters (K4D, KPA1500, Palstar HF-AUTO) show an SWR of between 1.1:1 and 1.2:1. with just the K$ transmitting and also with the KPA1500 in fine as it faults out. Any ideas? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 EZ link
If you are looking for K3 EZ application it can be found at this link as a zipped file. Thanks to Jim, N7US for the upload. https://groups.io/g/Elecraft-K3/files/K3_EZ There are 3 versions and I understand the latest one has bugs. The author is a SK. I have #2 running on my Windows 10 Pro machine. I did have to install Microsoft Framework 2.0. 73 Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Running high power
In running my KPA500/KAT500 combo I found no issues with any RFI of any type. Now what I did find, if I hit it too hard, it would flat top and generate all sorts of crap. This sould get into the computer and lock up WSJT-x. Also It would turn on or turn off one of the TVs on satellite service. And the satellite receiver would change channels. (That really annoyed the XYL) I find the amp to be very clean up to a point. Exceed that point, even the slightest amount, and it turns into a quasi square wave generator. No amount of filtering I tried would remedy the issue. The only solution is to set the drive power to attain 500 watts or less as measured on a reliable power meter. Then don't let the exciter exceed that drive level. I then set the PWR CAL via the amp menu for the correct value. This must be done on each band using a known good dummy load. I used my K3S to drive the amp and had the PWR SET PER BND active. The amp does require slightly different drive power amounts on different bands. I also set my TUNE PWR in the radio for 20 watts. This would always drive the amp to near rated output. The station antennas, the coax center fed 80/40M has a 1:1 balun at the feed-point, the 160M 1/2 wave wire is center fed with balanced line and a custom hybrid balun at the operating desk. Each piece of station equipment is bonded by a dedicated conductor to the station power supply ground terminal. Being on the 2nd floor of the house, I do not use any external station ground. Lightning protection is accomplished outside of the house. Hope this helps. 73 Bob, K4TAX On 11/23/2022 9:58 AM, elecraft-requ...@mailman.qth.net wrote: Message: 13 Date: Tue, 22 Nov 2022 22:36:46 + (UTC) From: Al Lorona To: Elecraft Reflector Subject: [Elecraft] Running high power Message-ID:<1647168817.1936686.1669156606...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 I'm really curious to ask those on this list who run high power: Do you find that you get into all kinds of devices around the house? I ran the KPA-500 in an extended manner for really the first time during the Phone SS and immediately: 1/ interfered with FM broadcast radio. 2/ caused the internet to drop out every time I keyed up on the lower bands. Am I the only one? Those of you who run high power all the time... how do you deal with these annoyances? Al? W6LX/4 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Recommendation for Microphone for K3s?
Likewise, I'm a retired pro audio engineer, studio and live music. The CM500 is a very good headset and plugs directly into the rear of the K3S. Turn on the bias. They are available from Sweetwater Sound (no connection to me) for about $60. I also use the Koss SB40 ($29 on Amazon) which has a dynamic mike. One has to be careful with the mike-to-mouth placement as it is a dynamic mike (no bias required) and thus is prone to proximity effects or boosted low end. Taking a different approach I use a Shure SM-58 ($100) on a boom. I did make my own XLR-3 to Foster 8 pin cable. Very easy to do and connects to the front panel MIC connector. No bias required. I also have used a Behringer XM8500 ($29) with very similar results as the SM-58. The SM-58, or its like in wireless form, is a very popular stage vocal mike. One factor I've observed and stressed is "proper microphone technique". That is proper placement of the microphone with regard to the mouth. I find many hams have been taught incorrectly in this regard or perhaps do not understand the relationship that exists. One needs to experiment with a specific mike and their voice in order to attain desired results. Many dynamic microphones will have proximity effect which will make them bottom heavy or bassy. Simply back the mike away from the mouth to correct the concern. Many microphones have extended high end response. This produces lots of lip and mouth and breath/nasal sounds. Again, correct placement above the mouth, or to the side or below the mouth usually corrects the concern. And of course, proper adjustment of microphone gain and any compression is mandatory with each mike. Jim, K9YC recommendations for TX EQ is an excellent starting point. In my case, I've tweaked the numbers a wee bit to suit my voice and my microphone choice. Listen to your signal by recording it and then playing it back from the various SDR remote receivers around the country. That way you know how your station sounds. 73 Bob, K4TAX On 11/2/2022 9:44 AM, elecraft-requ...@mailman.qth.net wrote: Message: 18 Date: Tue, 1 Nov 2022 17:48:31 -0700 From: Jim Brown To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Recommendation for Microphone for K3s? Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed I strongly agree with Rick's advice. I'm retired from pro audio, did lots of live recording, still have some great pro mics, but I've been using the CM500 since around 2009. I can't think of a better choice. I find the headphones comfy enough for a long weekend contest, and they sound great! 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA1500 RELIABILITY
I've owned a KPA1500 for 13 months now, and am very pleased. After being a ham for 59 years, I've used several both tube and solid state amps. Today in my shack, I have 3 amplifiers, and all three are solid state/LDMOS units, including a Palstar and a Flex. The KPA1500 is hands down my preferred "go-to" amplifier out of these three. Before I ordered the KPA1500, I had an Alpha 9500 on order. After reading about so many problems others had with it, I cancelled that order and went for the KPA1500. There are advantages and disadvantages to both types of amplifiers, as we all already know. Someday, I may have trouble with my 1500, but so far, I'm very pleased. I use it on SSB, CW, and most all of the HF digital modes. I do always insure the amplifier tuner is engaged and tuned at low drive power before switching to the higher power. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Y-Box connections KPA500/K3
Sorry Josep, the Y-BOX is designed to connect the ACC connector of one K3 or K4 to multiple devices, such as one amplifier and one automatic antenna switch or bandpass filter box; it cannot be used to connect two K3s in parallel to one amplifier. It *might* work if one K3 is completely powered off, but why bother? Changing bands with one K3 and one KPA500 from N1MM is very quick; no advantage to having two K3 radios unless you configure an SO2R station. 73, Bob, N6TV https://bit.ly/Y-BOX On Fri, Sep 9, 2022 at 2:53 AM Josep via Elecraft wrote: > Hi everybody, > I have a question regarding sharing my KPA500 with my two K3’s.I have a > Y-Box and thought about connecting the KPA500 to it (front db15 conn.), and > from the 4 rear db15’s, split to my K3’s ACC radio 1 and 2. So when I run > N1MM and change band, I can run the KPA500 on different bands, one at a > time of course.! From the K3 to the KPA500, I run ~30w power. Is that > possible or there is any other solution for that.? > Thanks, > > > 73, > JosepEA6BFBUG #256 - CWops #3072 - FOC #2182 (ex 1724) > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 INTERFACE WITH LDG Z100A
I purchased a Z100A with the idea of interfacing it to a specific brand/model of radio. I investigated the Z100A requirements to initiate the control of the tuner via the transceiver. From my earlier work, I don't see there is a command from the K3 that will support the requirements of the Z100A. However, there are many ICOM radios that do have the provision. Thus the command comes from the radio. From the LDG manual: "The LDG Z-100A includes the IC-104 DC power cable, as well as a three foot IC-100 Icom interface cable. However, interface cables for a plethora of other radios are available as an optional purchase, definitively making the Z-100A the last tuner you'll ever need to purchase. Press "Tune" on Tuner - Keys Automatically * IC-105 Alinco interface cable - uses EDX-2 jack, DX-70 and DX-77 * IC-108 Yaesu interface cable - uses TUN/LIN and KEY jacks, FT-891, 991/A, 857, 897, 100 * IC-109 Yaesu interface cable - uses TUN/LIN jack, FT-DX10, 1200, FT-950, 450 (NOTE: Do not select external tuner in settings) * IC-115 Yaesu interface cable - uses LINEAR jack, FT-DX101D, 3000 * IC-106 Kenwood interface cable - uses AT-300 jack * IC-105 Alinco interface cable - SR8T, SR9T" * Compatible with any Icom radio that is AH-4 or AH-3 compatible. (6M tuning from Tuner button for radios that are only AH-3 compatible) * Partial radio list: IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600, 7610 (and all variants). I find nothing to indicate the LDG100Z will interface with the K3. In reviewing the signals on the ACC connector on the K3, I do not find one dedicated to the TUNE function. See page 20 in the manual, ACC(Accessory I/O) 73 Bob, K4TAX Message: 13 Date: Fri, 02 Sep 2022 16:46:28 -0500 From: greg best To: Subject: [Elecraft] K3 INTERFACE WITH LDG Z100A Message-ID:<75a8ccf8-062b-4c74-94d9-d6b51d5d2...@contoso.com> Content-Type: text/plain; charset="UTF-8" I have tried to find a cable that goes from my K3 to the LDG Z100A tuner but all I see is just a cable with a Molex like connector going to the tuner and nothing on the other end of the K3 except bare wires (i.e. no connector). Does the tuner have to get connected to the K3 ACC jack?? Or does someone have a wiring diagram so I can marry the correct connections between the 2 units? 73?s, Greg N9GB O __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] T1 antenna tuner
Anyone have an extra one? 72, Bob KI0G Sent from Yahoo Mail for iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] INRAD W1
David: The Inrad W1 uses a dynamic mike so the bias must be OFF. As to gain, set to High and adjust the front panel MIC gain for an indication of 4 to 6 bars indicated on the ALC scale with normal speech. Then set the CMP for about 10 dB peaks on the CMP scale. Then adjust the VOX gain such that it trips as you desire. I use 015. Try to keep the ANTIVOX at a lower level. I use 005. The VOX hang or delay is set via the DELAY value on the front panel. I use 0.16. Position the mike to the side of your mouth and slightly above to prevent breath pops and nasal snorts. Good sounding mike. You'll need to set the TX EQ as follows: 50Hz @ -16, 100Hz @ -16, 200H @ -12, 400Hz @ 0, 800Hz @ 0, 1.60kHz @ +3, 2.4Khz @+3, 3.2kHz @ +6. If you desire a bit more low end on voice then set the 200 Hz to -6. If it is a bit bright then bring the 2.4 kHz and 3.2 kHz down 3 db each. Remember, it is always better to attenuate first, than to boost. 73 Bob, K4TAX On 8/26/2022 7:15 PM, elecraft-requ...@mailman.qth.net wrote: Message: 24 Date: Fri, 26 Aug 2022 20:15:32 -0400 From: David Smith To:"elecraft@mailman.qth.net" Subject: [Elecraft] INRAD W1 Message-ID: Content-Type: text/plain; charset="utf-8" I recently purchased an INRAD W1 for my K3 wanted comments on setting pf the K3 mic for L(low) or H(high) gain range. I have always used the Elecraft Proset K2 which K3 is set L and bias on. Have turned bias off for the INRAD W1. From what I have been able to find, the INRAD W1 is 600 ohm and comments have been set to L. But, my K3 will not key the VOX under the L setting and I have to set the K3 to H for high gain for the K3 VOX to eky. Comments appreciated. Thanks David ND4Y -- Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KIO3 failure mode
Many faults occur via the station ground system. This fault indicated a difference in potential between the station ground and the AC Mains ground. In many cases, the station equipment is connected between station ground and the AC Mains ground. The nearby lightning strike produces a difference in potential between two or more grounds to which the station is effectively connected in series with these grounds. Thus the current flow is through the station equipment, even if power is off and antennas are disconnected. My example: A cow is standing under a tree during a thunder storm. Lightning hits the tree and the energy is dispersed through the earth in all directions. Cow is connected via its 4 feet to the earth at 4 places. The difference in potential between the 4 connected places electrocutes the cow. Lightning did NOT strike the cow. If your station ground IS NOT BONDED to the AC Mains ground, (a) this is in violation of the NEC, (b) one has a high likelihood for damage in the event of a nearby lightning strike. Second, each piece of equipment MUST be bonded to a common point. There is a difference in bonding and grounding. Station lightning protection and grounding is always outside of the structure, never inside. Jim, K9YC and Ward Silver, N0AX in the ARRL book /GROUNDING AND BONDING for the Radio Amateur/ contains a wealth of correct information. Use this information to defuse "old ham lore" regarding grounding. 73 Bob, K4TAX On 8/24/2022 11:49 AM, elecraft-requ...@mailman.qth.net wrote: Message: 8 Date: Tue, 23 Aug 2022 21:31:42 + (UTC) From:cemil...@aol.com To:"ab7e...@gmail.com" , "elecraft@mailman.qth.net" Subject: Re: [Elecraft] [K3] KIO3 failure mode Message-ID:<903648173.1119840.1661290302...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Not owning a K3, but have the KX3..and other rigs!? Perhaps disconnecting the antenna (before and during an electrical storm)? from the shack hardware makes little boards like the K103 enjoy a longer life.? Just suggesting.? No disrespect in this comment. 73ChuckW4MIL -- Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 versus K3 specs
Regardless of specs, there is one fellow when asked about the best radio will always answer "it is the one you enjoy using". 73 Bob, K4TAX Message: 7 Date: Thu, 14 Jul 2022 16:44:23 -0400 (EDT) From: brianpepperdine brianpepperdine To:elecraft@mailman.qth.net Subject: [Elecraft] K2 versus K3 specs Message-ID:<50dd47e2.3064.181fe7498b7.webtop...@sympatico.ca> Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=no I realize there are a myriad of differences between the K2 and K3, but today I read the specs in each owners manual and was somewhat surprised that the each is listed at about -135 dBm sensitivity (pre-amp on for K2...pre-amp off at - 130 dBm for K2). I was curious since I was going thru those tests on the K2/KAT100 set I havein anticipation of any hamfest that might come around...whether to retain or not. If this is basically what this rig does (K2) aside from what more my K3 offers in other ways (variable bandwidth filter etc) then the K2 seems to be something to hold onto, pending a decent offer I could live with. Anyhow, I am just spit-balling and throwing this out there, FWIW. Brian VE3HI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FS - N6TV Y-Box
I don't remember what Ed had connected to his Y-BOX. Maybe just an Elecraft amplifier and an FSK keyer like a Mortty or WinKey V3. Unlike the K3, the K4 provides two (2) independent virtual serial ports via the USB cable, plus a third independent legacy RS232 port, all of which now support FSK RTTY keying directly via DTR pin, with no external keyer device required. So, the K3 requirement to break out the FSK pin of the ACC to do FSK RTTY keying no longer exists with the K4, though it's still supported. You no longer need to use external devices to get FSK RTTY keying from MMTTY. See the Elecraft K4 Application Note <https://ftp.elecraft.com/K4/Manuals%20Downloads/FSK%20RTTY%20Keying%20via%20USB%20or%20Serial%20Port%20with%20the%20Elecraft%20K4%20Transceiver.pdf> . The Y-BOX is still very useful with a K4, if you want to connect more than one device to the K4 ACC connector, such as an automatic amplifier and an automatic antenna switch / band decoder, plus a Mortty or WinKey V3 for external FSK keying, or a RemoteRig box for Remote Power ON, or a microHAM keying interface. Version 3.0 of the Y-BOX now includes four pull-up resistors to 12V on the band data lines, which is only required when connecting certain combinations of equipment to either the K3 or K4 in parallel, such as a KPA500 and an Antenna Genius or BCD-14 Band Decoder, due to the opto-isolators in some non-Elecraft devices draining too much current from the pins. The Y-BOX also provides an option to remotely toggle an Elecraft amplifier on or off from a K3 or K4 macro button, which is not supported by the Elecraft AUX cable without modification (because the Elecraft KPAK3AUX cable has no connection to Pin 8, so it provides no access to the KPA remote PWR ON line). The Y-BOX replaces the Elecraft AUX cables with standard 15-pin cables and is available in various lengths. 73, Bob, N6TV https://bit.ly/Y-BOX On Mon, Jul 11, 2022 at 11:37 AM wrote: > Why is the Y-Box no longer needed, does the K4 have multiple ACC ports for > amp, tuner, band decoder and other station accessories? > > John KK9A > > > Ed Schuller K6CTA wrote: > > Now that I have a K4, I no longer need my Y-Box. This is an original > model..it's in excellent condition. $85 shipped. > > Thanks! > 73, > Ed K6CTA > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@arrl.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Nifty KX1 & Options Quick Reference
I’ll take it. 7/, Bob KI0G Sent from Yahoo Mail for iPhone On Monday, July 4, 2022, 3:52 PM, Lou Laderman via Elecraft wrote: Shack cleaning uncovered an old "Nifty KX1 & Options Quick Reference Guide" (the small one, 2-3/4" x 4"). $1.00 (mostly to cover shipping) via PayPal, first "I'll take it via email to me direct" gets it. 73, Lou W0FK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Synthesizer upgrade kit
Hello group. I found a pair of K3 synthesizer upgrade kits and have them installed and working. So please disregard by previous post. Thank you, Bob Hughes W7SNR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FW: K3 Synthesizer, KSYN3A
Hello K3 user group: I have a K3 with the original synthesizer boards. I am looking for a pair of the new KSYN3A boards. I have spoken to Elecraft tech support and I am on their list in case they decide (Wayne, you might comment) to make a run of new synthesizer boards. The Tech Rep I spoke to didn’t know if a new run was going to happen anytime soon. So as a long shot I thought I would see if by chance any of you might have a pair that I might acquire. Thanks for reading this post. Bob Hughes W7SNR Cave Creek, AZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] COM port problems
I suggest you perform a RESTORE function from a previous file dated before the problem occurred. Or if you have a back-up system, go back to a known working configuration. (You have regular computer back ups don't you?) Using the K3 Utility, if communicates correctly with the radio, then start with a single application such as WSJT-X or FLDIGI. Don't use or launch any other control or logging applications. Just run WSJT-X or FLDIGI direct and stand-a-lone. If that works then you perhaps would be lead to believe that the configuration between the control application and logging application are suspect. The approach is to launch and run only one application at a time. If it doesn't work, then debug and find out why and get it working before moving on. Too many variables may take eons to sort out. 73 Bob, K4TAX On 7/1/2022 5:27 PM, elecraft-requ...@mailman.qth.net wrote: -Original Message- From:elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Dougherty (W2IRT) Sent: Thursday, June 30, 2022 12:28 AM To: 'George Thornton';Elecraft@mailman.qth.net Subject: Re: [Elecraft] COM port problems It's possible (and I'm guessing somehow likely), but darned if I know what to even look for. These are things that were set when the computer was built from scratch last year, they have worked 100% reliably over thousands of QSOs in both Commander and N1MM+ ever since, and absolutely nothing was changed in terms of configuration or even a Windows Update in at least two weeks. I just needed to restart the computer after moving it from a wall outlet to a UPS, and it started going crazy from that point on. Whatever the issue is, it seems to affect ALL the COM ports in the system the same; neither Commander nor N1MM can open the radio port, or either of the two rotor ports. I did somehow manage to get Commander working (don't aske me how, it just started), but the rotors are still no-go (and not critical at the moment). - pjd -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] The RIGHT way is to adjust COMP
Start with COMP at 0, adjust the MIC gain while speaking normal voice to attain 5 to 6 bars {no more} as indicated on the ALC meter. Then adjust the COMP for a value to indicate about 10 on voice peaks. For those that believe in using the "I turned it up a little bit, now how does that sound?" approach, . forget it. Set it correctly as described above and it will sound great. There is a right way to do this. Anything else is flying by the seat of your pants. If you desire to have it sound different, then twiddle the EQ values until your hearts content. After doing so, you may need to reset the MIC and COMP levels to be correct. I much prefer to listen to my signal on a remote SDR and record my signal on the SDR site. Then listen to it in my shack on my speakers. Then I know HOW MY SIGNAL SOUNDS. That's what is important. I make adjustments from there. As to others, they can adjust their receivers, their speakers, their hearing aids and a host of other things that will make ones signal sound..err, many different ways. So which one of the "many different ways" is best? Likely none of them. 73 Bob, K4TAX On 6/29/2022 8:59 PM, elecraft-requ...@mailman.qth.net wrote: Message: 10 Date: Wed, 29 Jun 2022 13:10:17 -0700 From: Jim Brown To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Ham Qualifications, Customer Service Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed On 6/29/2022 9:39 AM, Ed Cole wrote: Note on SSB compression, I've run at 20 with no complaints of distortion or splatter. Dial readout is the WRONG way to set compression -- it's meaningless. The RIGHT way is to adjust COMP for a METER reading of 10 dB on voice peaks. 73, Jim K9YC -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 data mode not working on 6 meter band NQ3N
I used my K3S on 6M extensively on FT-8 over the Field Day weekend. I used WSJT-X with the Radio Mode set for Fake IT . For the radio I have DATA MD set to DATA A. I think this is band specific. There should be no difference in the set-up for 6M being the same for 160M - 10M. 73 Bob, K4TAX On 6/29/2022 10:29 AM, elecraft-requ...@mailman.qth.net wrote: Message: 4 Date: Mon, 27 Jun 2022 21:34:05 -0400 From: "Robert Ward" To: Subject: [Elecraft] K3 data mode not working on 6 meter band NQ3N Message-ID: <000c01d88a8f$28e21050$7aa630f0$@com> Content-Type: text/plain; charset="us-ascii" Hi My K3 will not display FT8 signals on 6 meters when set to data mode. Data mode works on 10 thru 160 but not on 6 meters, FT8 decodes fine when USB is selected. Any suggestions would be appreciated! Thanks, Bob NQ3N -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Field Day and FT-8
AMEN! I am using my K3S and P3 to observe the signals. The antenna is a 4 ele yagi at 55 ft, fed with 75 ft of 1/2" Andrew hard-line. I agree with Jim, the ham community in general has been dumed down in order to produce the numbers and dollars. That's what politicians like. The same thing is happening in our schools and colleges in order to get desired passing numbers. 73 Bob, K4TAX On 6/27/2022 1:39 PM, elecraft-requ...@mailman.qth.net wrote: Message: 4 Date: Sun, 26 Jun 2022 13:21:51 -0700 From: Jim Brown To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Field Day and FT-8 Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed On 6/26/2022 1:07 PM, Lance Collister, W7GJ wrote: I agree that there are a lot of improperly set up radios and improperly set up software programs on the bands! Ham radio is a TECHNICAL hobby. We are required to pass an exam demonstrating that we understand the underlying principles, our privileges are based on our having that understanding, and it is our LAWFUL responsibility to transmit clean signals. A major problem is that many hams have never bothered to learn the many fundamentals of radio, audio, and electronics, stopping after memorizing only enough Q to pass the exam for their license. 73, Jim K9YC -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Field Day and FT-8
I operated FD from here at the house this weekend. Most all of my FT-8 contacts were on 6M. I was appalled at the poor quality of many signals. Many show spurious every 1 kHz to 2 kHz either side of their primary signal. Several were noted to be bands of noise on the order of 2 kHz to 3 kHz wide. What gives with hams and their pride for good quality signals? Bottom line..this is poor operating and technical practice. Just because it was Field Day, that is no excuse either. Have the masses digressed to this level of non technical expertise? It sure seems so. Then I was off to 80M and 40M for a few FT-8 contacts. No different. WOW! This is all very disappointing. 73 Bob, K4TAX -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [SPAM] K3S - High SWR on 6 Meters
Glad the solution was simple. And THANKS for posting your results. I wish others would do the same when their issues are resolved. 73 Bob, K4TAX Sent from my iPhone > On Jun 15, 2022, at 10:25 AM, N4ST - Jim wrote: > > For some reason, my previous post did not show up. > > *** PROBLEM SOLVED *** > > I had an old LPA/PA combo that was replaced with an upgraded LPA/PA combo. > The new PA required a configuration setting that inserted 6dB of attenuation > in the amplifier chain to avoid instabilities. > The old combo would not reach full power if the attenuation was inserted, but > the new combo was unstable unless it was. > Keith at Elecraft and also K7HP both suggested the "fix" and that was indeed > the problem! > > > 73, > Jim - N4ST > > > -Original Message- > From: elecraft-boun...@mailman.qth.net On > Behalf Of Bob McGraw > Sent: Tuesday, June 14, 2022 20:56 > To: elecraft@mailman.qth.net > Subject: [SPAM] [Elecraft] K3S - High SWR on 6 Meters > > Is the ATU in BYPASS or AUTO mode? A dit would cause it to resolve a > match or recall a previous match. If your 6M antenna has an SWR of > 1.5:1 or less, then the ATU should be in BYPASS mode for 6M. > > With WSJT-X, is the Radio Setup menu set to Fake It or SPLIT? If SPLIT, > then is VFO B on some random or frequency distant from VFO A? I > suggest setting the WSJT-X Setup to Fake it. > > 73 > > Bob, K4TAX > > >> On 6/14/2022 7:46 PM, elecraft-requ...@mailman.qth.net wrote: >> Message: 6 >> Date: Tue, 14 Jun 2022 09:37:33 -0600 >> From: "N4ST - Jim" >> To:, >> Subject: Re: [Elecraft] K3S - High SWR on 6 Meters >> Message-ID:<02b901d88004$aafe32c0$00fa9840$@n4st.com> >> Content-Type: text/plain;charset="us-ascii" >> >> High SWR occurs immediately when using the FT8 Tune function on WSJT-X >> It does not occur initially with a dummy load, however once the high SWR >> state occurs, it persists when switching to a dummy load. >> A CW dit will clear the high SWR state.. >> >> ___ >> 73, >> Jim - N4ST > > -- > IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, > ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY > AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to hamsh...@n4st.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S - High SWR on 6 Meters
Is the ATU in BYPASS or AUTO mode? A dit would cause it to resolve a match or recall a previous match. If your 6M antenna has an SWR of 1.5:1 or less, then the ATU should be in BYPASS mode for 6M. With WSJT-X, is the Radio Setup menu set to Fake It or SPLIT? If SPLIT, then is VFO B on some random or frequency distant from VFO A? I suggest setting the WSJT-X Setup to Fake it. 73 Bob, K4TAX On 6/14/2022 7:46 PM, elecraft-requ...@mailman.qth.net wrote: Message: 6 Date: Tue, 14 Jun 2022 09:37:33 -0600 From: "N4ST - Jim" To:, Subject: Re: [Elecraft] K3S - High SWR on 6 Meters Message-ID:<02b901d88004$aafe32c0$00fa9840$@n4st.com> Content-Type: text/plain; charset="us-ascii" High SWR occurs immediately when using the FT8 Tune function on WSJT-X It does not occur initially with a dummy load, however once the high SWR state occurs, it persists when switching to a dummy load. A CW dit will clear the high SWR state.. ___ 73, Jim - N4ST -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KV5J's line of Digital Displays for Elecraft's
I really think NOT! On the other hand..the DELETE key works well and as to the JUNK filter, it works too. 73 Bob, K4TAX On 6/8/2022 10:20 AM, elecraft-requ...@mailman.qth.net wrote: Message: 19 Date: Wed, 8 Jun 2022 10:37:33 +0200 From:"df...@darc.de" To:elecraft@mailman.qth.net Subject: Re: [Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA1500, KAT500 and KPA500 amps Message-ID: Content-Type: text/plain; charset=us-ascii Should there be advertisings in a mailing list? -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA1500 reduces power as it gets warmer?
Kevin: The duty cycle on FT-8 mode is ~50%. The KPA1500 and KPA500 are both very adequately rated for this mode and for rated outputs, 1500 watts and 500 watts respectively. Your K2 is rated at 10 watts output! At 15 watts, just because it will do it, is no reason to run that power level. I can understand why the PA failed. Also SWR will contribute to heating of the PA devices. Poor antenna match will eat PA devices. Hams seem to think running at reduced power will "save something". This is bad ham advice and basically "old ham lore" which is not correct. Conversely, my measurements show my KPA500 is 38% efficient at 250 watts and 57% efficient at 500 watts on 20M. This relates to 404 watts of dissipation at 250 watts and 368 watts of dissipation at 500 watts. Thus 500 watts is less strenuous, producing less heat on the components, than 250 watts. Yes, FT-8 is a weak signal mode. I run near legal limit on 2M to a nice array just to have a weak signal off of the moon. Low power just won't get it. 73 Bob, K4TAX On 6/6/2022 11:29 AM, elecraft-requ...@mailman.qth.net wrote: From:elecraft-boun...@mailman.qth.neton behalf of Kevin Robertson via Elecraft Sent: Saturday, June 4, 2022 6:52 AM To: Rick NK7I Cc:elecraft@mailman.qth.net Subject: Re: [Elecraft] KPA1500 reduces power as it gets warmer? FT8 is a weak signal mode, designed for low power. Given its high duty cycle, you are asking for trouble if you operate your power amplifier in FT8 mode using your KPA1500 at anywhere near high power. I burned out my final on my K2 at 15 watts on FT8. 73, Kevin Robertson KD2WCY -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Relocating my KPA-1500 - need cable
On Thu, Jun 2, 2022, 11:24 PM wrote: > *Just so I’m clear on the concept, you’re suggesting taking my existing > AUX cable from the Y-box to the amp on the desk, and adding a DB-15 > straight-through extension to it, and connecting the far end of that > extension into the relocated KPA-1500 in the basement, yes?* > Yes, though it doesn't matter (electrically) which device connects with the Elecraft AUX cable.You could plug the extension into the Y-BOX and the AUX cable into the amp. FYI, the correct term is DE15 (sometimes HD15 for High Density). No such thing as DB15 or DB9 though, they are commonly misused. > I can supply a 2.5' M/M cable from rig to Y-BOX if you need one. > > *[pjd] At the moment I have the Y-box plugged into the K3s, with one line > going to the amp, and a second line sending band data to my Ameritron > RCS-12 automatic antenna switch controller at the base of the tower. * > The controller (band decoder box) is usually located in the shack, with the relay box outside. That should be more reliable. > > > *At the moment I have no plans to replace that, despite the fact it’s > basically junk that doesn’t work automatically when the shack is below > 65°F, which is the case all winter long! But I’m trying to see why I would > need to change out the cable from the radio to the Y-box. Am I missing > something?* > If it's 5 ft long, that adds to the total length between K3 and AMP and RCS-12 controller. If you don't need 5 ft between rig and Y-BOX, replacing it with a 2.5 ft cable will reduce the the total length (and loss) by a little bit. But it will probably won't make any difference. 73, Bob, N6TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Relocating my KPA-1500 - need cable
On Thu, Jun 2, 2022 at 6:28 PM wrote: > Not sure what you mean by “set drive power” this is something I generally > do manually, but would love the ability to do it automatically based on > band segment. > The K3 will automatically memorize and recall the required drive level set on each band, but not each band segment, if you set K3 *MENU:PWR SET* to *PER BAND*. The K3 remembers two drive levels per band, one "barefoot", and the other "when the AMP is ON and in OPER". So you can leave the K3 set to 100W drive, then turn on the AMP and put it in OPER mode (you'll see a message on the K3 when you do that, if connected properly), then turn down the PWR knob to set the drive level needed on that band when you're using the amp. An asterisk appears next to the power level on the K3 display, to indicate that you are setting the "when the amp. is in OPER" power level. The asterisk goes away when you put the amp. in STBY or OFF. Set the drive needed once, each band, with the amp. in OPER mode, and and you're all set; the K3 will set the drive power to the last-used values for amp in OPER mode, on every band. The KPA1500 tuner is set by band *segment*, but not the drive power. 40m SSB is a problem child for me where a short Yagi means I have to cut > back drive power above 7175 or so due to SWR. > The K3 will not remember that. How high is the SWR up there? I assume you are using the KPA1500 ATU, but if SWR is >3:1, I don't think you can run 1500W even with the tuner engaged. > I really want the exact same functionality that I have with the amp here > in the shack, connected via the old Y-Box. > Yes, you will get that by extending the AUX cable, which must be in series with the extension. I would try the length you need to see if it works. Chances are it will work fine if you use a quality cable. I will do an accurate measurement, but I’m pretty sure it’s somewhere > between 15 and 20 feet between the Y-box and the proposed location of the > amp. > Should work fine. I can supply a 2.5' M/M cable from rig to Y-BOX if you need one. On Thu, Jun 2, 2022 at 6:33 PM wrote: > Forgot to add in my reply that I have LAN connectivity at the proposed amp > location, connected directly from the main switch on the other side of the > basement. > Great, then you only need one 15-pin cable or one new Ethernet run, not two. 73, Bob, N6TV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Relocating my KPA-1500 - need cable
I would try the 25' to 30' AUX cable. It will probably work fine. AUXBUS is only used for automatically setting drive power ("KPA1500 OPER" messages) and recognizing band buttons being pressed on the amp, which you will not be doing, plus rig frequency setting the KPA1500 tuner to the right segment, though RF-sensing can work for that too. If you don't use the tuner much, or If AUXBUS gives trouble, change radio type from K4 to BCD, and use the same long AUX cable. If that doesn't work, a long RS-232 to 3.5mm TRS cable can be used to track K4 frequency. A long ethernet or a WiFi to Ethernet extender will provide KPA1500 Remote software connection capability, though you may want to set up your Router to assign a fixed IP address to the KPA1500. KPA1500 Firmware updates still require a local USB cable, but you can temporarily use a WiFi-enabled laptop for that. 73, Bob, N6TV On Thu, Jun 2, 2022 at 5:04 PM wrote: > I'm not familiar with CAN-bus. How can I easily implement this in my > setup? End result is I want two way CAT control -- amp gets band/frequency > data from the radio, KPA-1500 remote app gets SWR and power from the amp to > display on the PC and control the power switch and standby/operate from the > remote app. > > - pjd > > -Original Message- > From: jerry > Sent: Thursday, June 2, 2022 3:20 PM > To: li...@w2irt.net > Cc: 'Jack Brindle' ; 'Elecraft Reflector Reflector' < > elecraft@mailman.qth.net> > Subject: Re: [Elecraft] Relocating my KPA-1500 - need cable > > On 2022-06-02 11:23, li...@w2irt.net wrote: > > I hadn't considered that! Is there a preferred way of doing this over > > longer distances? I'm sure I'm not the only person who's needed to > > remote the amp. > > > > - pjd > > As a homebrew project, if you want "robust" and "just works", it's hard to > beat CAN-bus. A quick Google confirms that for a baud rate of 250K, it > will work up to > 820 feet. > > - Jerry KF6VB > > > > > > > > -Original Message- > > From: elecraft-boun...@mailman.qth.net > > On Behalf Of Jack Brindle via > > Elecraft > > Sent: Thursday, June 2, 2022 12:30 PM > > To: Elecraft Reflector Reflector > > Subject: Re: [Elecraft] Relocating my KPA-1500 - need cable > > > > Using a network connection would be a very good idea. Auxbus is not > > meant to go 20 feet, and indeed will probably fail at that distance. > > Thus using an alternate method to get frequency info to the amplifier > > would be a good idea. > > > > 73, > > Jack, W6FB > > > > > >> On Jun 2, 2022, at 10:34 AM, David Decoons wrote: > >> > >> Hi Peter, > >> > >> Contact Bob, N6TV. He can make good quality DB 15 cables that are > >> shielded. > >> > >> Let me know when you are ready and I can help. Also you can do it as > >> we discussed on the phone via the network, running a CAT 6 cable. > >> > >> Call me if you have questions. > >> > >> 73 > >> Dave wo2x > >> > >> Sent from my iPad > >> > >>> On Jun 2, 2022, at 11:12 AM, li...@w2irt.net > >>> <mailto:li...@w2irt.net> > >>> wrote: > >>> > >>> I need to move my KPA-1500 into the basement, and I've got an > >>> electrician coming to put in the new outlet next week. But the only > >>> tricky issue now is finding the correct cable to run to the amp from > >>> my Y-Box to provide frequency/band data, etc. I will need a cable > >>> run of about 20 feet, which will need to run behind the wall, down > >>> into a crawlspace, then through a concrete wall to the new rack. > >>> > >>> With sub-optimal eyesight and shaky hands, I'm not sure I'd by much > >>> good making one, but if they're not available easily in the > >>> aftermarket I guess I can give it a shot. Does anybody know where to > >>> find a pre-made ~20ish foot long cable, or if not, (a) what pinouts > >>> do I need, (b) where to source the correct cable to do this > >>> properly, and (c) what connectors-I'm guessing DB15M and DB15F? > >>> > >>> > >>> > >>> > >>> Regards, > >>> Peter Dougherty, W2IRT > >>> > >>> DXCC Card Checker/CQ-WAZ Checkpoint > >>> > >>> www.facebook.com/W2IRT > >>> > >>> > >>> > >>> ___
Re: [Elecraft] Relocating my KPA-1500 - need cable
Peter, My records show that you purchased the original Y-BOX v1.3, which requires an Elecraft AUX cable from Y-BOX to amp. (The Y-BOX v2.x and v3.0 Y-BOXs allow any DE-15 M/F non-VGA cable to be used instead of the Elecraft AUX cable). The easiest solution, if your electrician can snake a cable with the molded DE15 connectors through the wall, is to insert a 25' M/F 15-pin extension cable like this one *in series with your AMP AUX cable*. https://cablesondemand.com/15-pin-hd-d-sub-cable-hd15/15-pin-hd15-deluxe-hd-d-sub-cable-copper-shielded-male-female-cs-dsdhd15mf0-025 This will achieve the proper electrical connections, though at 31' total length you may be at the limit of the maximum AUX cable length that will work reliably. Another option is to have your Electrician wire a pair of SHIELDED "Ethernet" CAT6 (8-wire) outlets between shack and basement, with RJ-45 jacks mounted to the wall. Wiring two pairs of outlets at each end will allow both Elecraft AUX *and *Ethernet connections to the amp from upstairs, providing a good connection for the KPA1500 Remote software running on a PC upstairs. But, KPA1500 firmware updates (rare these days) will still require a direct USB connection to the amp. If using RJ-45 jacks (something Electricians regularly install), I can make you a custom DE15M to RJ45 shielded cable to reach from Y-BOX to the wall jack, and a second RJ45 to DE15F cable from basement wall jack to the AMP AUX. Only 8 pins out of the 15 will be connected, but that will be sufficient. I could theoretically make a USB to RJ45 cable that would allow USB connection to the amp. for firmware updates, but the theoretical maximum length if USB 2.0 is about 15', so that may not work well at all. 73, Bob, N6TV https://bit.ly/Y-BOX On Thu, Jun 2, 2022 at 8:11 AM wrote: > I need to move my KPA-1500 into the basement, and I've got an electrician > coming to put in the new outlet next week. But the only tricky issue now is > finding the correct cable to run to the amp from my Y-Box to provide > frequency/band data, etc. I will need a cable run of about 20 feet, which > will need to run behind the wall, down into a crawlspace, then through a > concrete wall to the new rack. > > With sub-optimal eyesight and shaky hands, I'm not sure I'd by much good > making one, but if they're not available easily in the aftermarket I guess > I > can give it a shot. Does anybody know where to find a pre-made ~20ish foot > long cable, or if not, (a) what pinouts do I need, (b) where to source the > correct cable to do this properly, and (c) what connectors-I'm guessing > DB15M and DB15F? > > > > > Regards, > Peter Dougherty, W2IRT > > DXCC Card Checker/CQ-WAZ Checkpoint > > www.facebook.com/W2IRT > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@arrl.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW, Here I come!
Look on menu for sidetone volume Sent from Yahoo Mail for iPhone On Tuesday, May 31, 2022, 7:02 PM, Richard wrote: For code practice, I tried plugging a straight key into the “KEY” jack on the back of my K3s. I hear a tone when I operate the straight key but the volume is low and I can’t change the tone. How about some sequential help on this? Richard W4KBX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500/KAT500 SOLD
KPA500 / KAT500 has been SOLD. 73 Bob, K4TAX On 5/30/2022 8:52 PM, Bob McGraw wrote: Making room for something else. I have for sale my personal KPA500-F and KAT500-F. Includes cables ready to connect to your K3 or K3S. Both items have the last release of firmware installed. Both items are in excellent condition and include cables and accessories. Shown on my QRZ page. KPA500-F s/n3519 purchased/received 4/25/2018. Has original Elecraft box and packing. Includes 240V power cable. KAT500-F s/n 1807 purchased/received 10/23/2018. Both have been on my desk in a non-smoking residential environment. Pictures are available on request. Both items shipped to lower 48. $2600.00 Cash or cashier check. 931 256 0340 RMcGraw @ Benlomand dot Net -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500/KAT500 F.S.
Making room for something else. I have for sale my personal KPA500-F and KAT500-F. Includes cables ready to connect to your K3 or K3S. Both items have the last release of firmware installed. Both items are in excellent condition and include cables and accessories. Shown on my QRZ page. KPA500-F s/n3519 purchased/received 4/25/2018. Has original Elecraft box and packing. Includes 240V power cable. KAT500-F s/n 1807 purchased/received 10/23/2018. Both have been on my desk in a non-smoking residential environment. Pictures are available on request. Both items shipped to lower 48. $2600.00 Cash or cashier check. 931 256 0340 RMcGraw @ Benlomand dot Net -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3-N1MM
This is a new Windows computer. I have operated the combination on a previous computer. I can check the software on KX3 Utility so assume USB and COM port are working. No communication between the two, band change, band map etc. I am not using WINKeyer or sending CW. RESET RADIO does not cure the problem. N1MM works in Manual VFO mode. Suggestions? 72, Bob KI0G Sent from Yahoo Mail for iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [OT ] Specs
Many many radios are loaded with "whistles and bells". But the better radio is.the one you enjoy using. If it does everything you wish, then look no further. 73 Bob, K4TAX On 5/25/2022 1:18 PM, elecraft-requ...@mailman.qth.net wrote: From: Al Lorona To: Elecraft Reflector Subject: [Elecraft] [OT] Specs Message-ID:<1102437476.2890529.1653494380...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Several weeks ago, someone here recommended listening to a recent interview with receiver test guru Rob Sherwood. In it, the interviewer pressed Rob for a radio recommendation. At first he resisted but eventually gave three transceivers that he said "anybody would be very happy with". But when he compared them, instead of pointing to specs like dynamic range, sensitivity, receiver noise, , his deciding factors were interesting. Speaking about one radio model, he said, "It's a good receiver, but it's got a really loud relay inside when you send CW." About a model from a different manufacturer, he said, "Great radio, but the spectrum display makes me dizzy." About another: "The speech processor doesn't work that well." And this went on. In other words, just like the rest of us, he believes there are lots of other factors that make or break a radio, many more than mere numbers or specs. (At one point Rob said, "I think I've created a monster," referring to The List.) This is why I have written here in the past that you have to get a radio into your hands before deciding whether it's any good; making your decision on the numbers alone doesn't give you any real idea how the radio performs.? Don't write off a new radio just because it's in ninth place (or whatever) on The List. Don't be surprised if you don't like one of the "top radios" on The List. Be open to liking a radio or manufacturer farther down The List. That's what Rob Sherwood does. R, Al? W6LX/4 -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] The Dreaded 400 Hz hump
Oh yes it is there on many SSB signals where the OP is a male. That is where most of the fundamental male voice energy occurs. Those signals which look uniform across the SSB TX bandpass do sound good. I attribute this to the fact most hams will "boost this and boost that" and never give thoughts to attenuating. In fact the characteristics of the EQ in the boost mode are noticeable different than the attenuate mode. Yes, one can hear the difference. In my world of pro audio, it is a practice to attenuate first and then boost if absolutely necessary. Hams just can't get over the fact they must always have more...boost boost boost. So if ones signal is muddy or bassy, what's to do? Attenuate the low end first, and rarely if ever, boost the high end. Of course boosting the high end will make it brighter, but not attenuating the low end will consume lots of unnecessary transmitter power not being used for effective communications. 50Hz - 16dB, 100Hz -16dB, 200Hz - 16dB, 400Hz - 9dB, 800Hz - 0dB, 1.6kHz - 0dB, 2.4kHz +0dB, 2.4kHz +3dB, 3.2kHz + 6 dB. Works for me. 73 Bob, K4TAX On 5/20/2022 4:30 PM, elecraft-requ...@mailman.qth.net wrote: Message: 8 Date: Thu, 19 May 2022 02:14:10 + (UTC) From: Al Lorona To: Elecraft Reflector Subject: [Elecraft] [OT] The dreaded 400 Hz hump Message-ID:<1840135010.161126.1652926450...@mail.yahoo.com> Content-Type: text/plain; charset=UTF-8 Have you studied how SSB signals look on your panadapter? I believe about 90% of all phone signals have a very pronounced peak at about 400 or 500 Hz. This peak is sometimes 10 dB (or more) higher than the rest of the bandwidth. This is wasted power and, to my ear, makes signals sound muddier. On the other hand, every once in a while you'll see a signal that has a more or less flat frequency response, without any huge peaks. Sometimes, a signal will actually have slightly*more* power in the higher frequencies, say, 2000 Hz and higher. I've noticed that these signals have much more articulation and punch. But these signals are all too scarce. It's pretty well known that the aging population of hams collectively suffers from a high frequency hearing loss. It seems to me that this is even more reason to carefully shape your frequency response and cut the dreaded 400 Hz hump. R, Al? W6LX/4 -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Antenna Quandary
Richard: Oh yes, there are many knowledgeable folks on the reflector. I'm not one of them. HI HI I would ask of you to better define your needs, objective, concerns, frequency of usage, and such. It will enlist a lot better and specific answers. 73 Bob, K4TAX On 5/12/2022 9:42 AM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Wed, 11 May 2022 16:58:04 -0400 From: Richard To:elecraft@mailman.qth.net Subject: [Elecraft] Antenna Quandary Message-ID: Content-Type: text/plain; charset=us-ascii Anybody out there super-well versed in the behavior of the half-wave dipole? Cheers, Richard Kunc W4KBX -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PayPal holding payment. (Follow up)
While I do some internet transactions, I'm very careful to research the company or person I'm doing business with in advance. Both ways, when buying and when selling. Regarding internet sales, I figure there are just as many SCAMS as there are about that number of SELLERS. That does not say all SELLERS are scams. But it does say that all SCAMS are sellers. Sell you something to get your money, but never get your something, but they get the money. 73 Bob, K4TAX On 5/8/2022 11:18 AM, elecraft-requ...@mailman.qth.net wrote: PayPal holding payment. (Follow up) -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Preamp
I believe the K3 has one preamp while the K3S has two. The synth boards have nothing to do with the preamp. 73 Bob, K4TAX On 5/8/2022 11:18 AM, elecraft-requ...@mailman.qth.net wrote: Message: 11 Date: Sat, 7 May 2022 15:40:07 -0600 From: Mike Fatchett W0MU To:elecraft@mailman.qth.net Subject: [Elecraft] K3 Preamp Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed I thought there were two settings for the preamp? Like a 1 and 2? I have the new synth boards. W0MU -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] I need some guidance - KAT500
Your request can be attained by use of the KAT500 Utility to configure each antenna or antenna port per band as needed. I use Ant 1 and Ant 2 for my wire antennas, 160M - 10M and Ant 3 for my 6M yagi in bypass mode. After setting up the KAT500 via the Utility, and training the KAT500 for the antennas and frequencies, then when I go to 6M the KAT500 goes automatically to BYPASS mode. The other bands are selected for "last used" by the Utility. 73 Bob, K4TAX On 5/5/2022 1:49 PM, elecraft-requ...@mailman.qth.net wrote: Message: 21 Date: Thu, 5 May 2022 07:45:40 -0700 From: "Mike Flowers" To:, Subject: [Elecraft] I need some guidance - KAT500 Message-ID:<004301d8608e$cafe8510$60fb8f30$@gmail.com> Content-Type: text/plain; charset="us-ascii" Hello Elecrafters, I am running a K3-based K-Line: K3-P3-KAT500-KPS500. Currently, I have two antennas connected to my KAT500: ANT 1 is my SteppIR 40/30 3L, and ANT 3 is my 160M/80M dipole. When I have my K3 select 40M/20M/17M/15M/12M/10M/6M, my KAT500 is in BYP mode and ANT 1 as expected. On 30M, my SteppIR requires some matching and I have trained the KAT500 to match the SteppIR on 30M. This works fine if I remember to switch the KAT500 to MAN before transmitting on 30M. On 160M and 80M, the KAT500 selects the ANT 3 correctly, but stays in BYP mode and I must switch the KAT500 to MAN to use the KAT500 matching parameters. I've been operating this way for 10 years and I'm quite use to these methods. However, it has occurred to me that there may be a way of configuring the KAT500 so that: * When I have the K3 select 30M, the KAT500 selects MAN mode ANT 1, and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500 would return to BYP mode on ANT1. * When I have the K3 select 160m or 80M, the KAT500 would select MAN mode ANT 3, and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500 would return to BYP mode ANT1. It appears to me that once my KAT500 is in BYP mode, it remains in BYP mode for whichever band/ANT is selected until changed by the MODE button, and once in MAN mode, it remains in that mode until manually changed. I've worked with the KAT500 Utility to try to achieve this more automatic switching of antennas and KAT500 modes by band but have not yet succeeded. I've read through the manual, but I cannot find what I need to accomplish this. Your guidance would be most appreciated. Thanks! - 73 and good DX de Mike,<http://www.qrz.com/db/k6mkf/> K6MKF, NCDXC <https://www.ncdxc.org/> Vice-President 2021-2022 - In pursuit of DXCELLENCE! -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4D - KPA500 Fault Question + wish
Based on my experience with my KPA500 and an exchange with Jack, W6FB, I have found no need to run the Fan Speed at any value other than NOR as defined via the MENU. {See my comments regarding efficiency.} I'm aware that "others" have measured and tracked and computed results to an extensive numerical value. OK so be it. It is your amp. I just choose to run mine in the "quiet" mode of NORMAL {and not suck in a load of dust by it running all the time} and allow the control system in the amp to apply the fan and fan speed as so dictated by the software. 73 Bob, K4TAX On 4/24/2022 6:48 PM, elecraft-requ...@mailman.qth.net wrote: Message: 15 Date: Sun, 24 Apr 2022 15:40:30 -0500 From: Jack Brindle To: email Cc:"elecraft@mailman.qth.net" Subject: Re: [Elecraft] K4D - KPA500 Fault Question + wish Message-ID: Content-Type: text/plain; charset=utf-8 If there was no recent ?HI TEMP? fault in the log, then it was not the KPA500 that caused the display on the K4. In that case, ask the K4 folks what may have happened. I have never seen a HI TEMP fault with my KPA500s in normal operation, although I am sure others have. I have seen it when testing? Again, the FAN CTL is the minimum fan speed. If the fan goes above that speed, it will certainly slow down when the PA cools. The amp works just fine at the default value of 0, only turning on the fan when it is needed. Now, my question for everyone reading - when is it that you feel the need to set the fan speed above 0? 73, Jack, W6FB -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 Fault Question + wish
A year or so ago I embarked on a project to determine the efficiency and the "sweet spot" operating parameters of my KPA500. I drive my KPA500 with my Elecraft K3S. Armed with a good 50 ohm dummy load, two watt meters {one on the input and one on the output}, and my EXCEL spreadsheet, I measured each band, 160M - 6M. I choose power output levels starting at 100 watts and every 100 watts thereafter up to 500 watts. Using the KPA500 display as the source for volts and amps, the input power was determined and calculated against the measured output power. Thus the efficiency was easily calculated. No consideration for the actual drive power was in the measured output power. And at the same time, measuring the input power and output power and a little math, the gain of the amplifier was determined at various power levels and bands. Yes indeed, I found that running at reduced power saves nothing! The amp is more efficient in the 350 to 450 watt range and thus dissipates less heat. And from band to band and power level, it is easy to see that the efficiency changes. In a quick summary, I found the efficiency runs from a low of 23.4% at 100 watts on 20M to a high of 70.9% at 500 watts on 80M. I did not exceed 500 watts on any band, thus any amplifier compression was not anticipated. The power/heat dissipation runs from a high of 400 watts at 250 watts output on 20M to a low of 196 watts at 100 watts output on 80M. The amplifier average gain varies from 13.95 dB on 20M to 14.59 dB on 80M. To attain these values, the drive power varies from a low of 3.3 watts on 10M & 15M for 100 watts output to a high of 18.5 watts for 500 watts on 40M. It might do well for each KPA500 owner to run power and efficiency curves on their amplifiers. The results are enlightening. 73 Bob, K4TAX On 4/24/2022 6:48 PM, elecraft-requ...@mailman.qth.net wrote: Message: 12 Date: Sun, 24 Apr 2022 14:03:55 -0400 From: EMAIL To: Elecraft K4 Group, "elecraft@mailman.qth.net" Subject: [Elecraft] K4D - KPA500 Fault Question + wish Message-ID: Content-Type: text/plain; charset=UTF-8; format=flowed Yesterday I got a fault message on the K4 screen. It disappeared before I could see it fully, but I did get "tighten heatsink screws".? The fan was working as its speed was speeding up and the KPA500 temp saw about 60+C (it may have been higher).? I was running 100 watts PSK31.? The KPA500 did switch to STBY (I think). I can not find any record of what the message was.? I can not find "heatsink screws" referenced in the K4, KPA500 or KPA1500 manuals.? Both the K4 and KPA500 are factory built. PSK31 has a longer duty cycle than FT8 and I was running FT8 at higher power with out the amp temp going above 60C, earlier.? I switched to barefoot and ran 80W PSK31 without issue. Question 1) Before I take the KPA500 apart, is this a problem or just duty cycle?? I would think the KPA500 would be able to handle 100W key down. Question 2) I saved the K4 backup and diagnostic logs to USB disk (the next day).? I could NOT find anything that looked like the error messages.? I find many messages disappear before I get a chance to read them. Wish 1) KPA500 add FAN CTL for both OPER and STBY or set STBY to run at NOR and OPER to be adjustable. Wish 2) K4, allow checking date/time for all past error messages.? I may have had a KPA500 over temp message while long winded on SSB (but only 200W)? Wish 3) K4, HOLD error messages until "confirmed".? Messages like KPA500 on/off (info) only need to be short time (??), but if away (maybe confirm).? Either way "this" will be an issue for? the contesters, so have a way to save for later recall, as in write to USB if one is installed.? Fn could write to USB disk with time stamp?? OR, are there documents on how to read the diagnostic logs? 73, steve WB3LGC I will also send to support if no one has a good idea about the fault. -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Various non-ham signals
The following link provides some very interesting data regarding many new and current signals heard on or near the ham bands. https://www.sigidwiki.com/wiki/Category:Military 73 Bob, K4TAX -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] military-intruders-in-ham-radio-bands
Interesting reading. Also the links are equally interesting. http://www.southgatearc.org/news/2022/april/iarums-newsletter-military-intruders-in-ham-radio-bands.htm 73 Bob, K4TAX -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Rig control error with K3S and WSJT-X on 30 meters
Only one band? Sounds like the classic RFI into the computer, the cables between the radio and computer. Most likely common mode current on the feedline coming back down into the station area. That would require common mode choke to be installed at the feed point of the antenna. Might try a couple of turns of coax through a FT core and see if that helps. A couple of clamp on beads on the cable between the radio and computer might help. But the antenna feed point is really the best place to censure common mode current. Also..make sure every piece of station equipment is bonded to a common point. I use the station power supply ground terminal for my common point. Each piece of equipment has a dedicated jumper to this point. 73 Bob, K4TAX On 4/21/2022 7:50 AM, elecraft-requ...@mailman.qth.net wrote: Message: 13 Date: Mon, 18 Apr 2022 22:20:38 -0700 From: Frank O'Donnell To:"elecraft@mailman.qth.net" Subject: [Elecraft] Rig control error with K3S and WSJT-X on 30 meters Message-ID:<792c3760-8000-ef9b-93d1-30dafa060...@inkbox.net> Content-Type: text/plain; charset=UTF-8; format=flowed Over a period of time I've noticed an occasional error when transmitting FT8 on 30 meters with my K3S using WSJT-X. A couple of seconds into a transmit cycle, WSJT-X will display a "Rig control error" box, and I start hearing the rig's modulated audio output on its own speaker. This only happens on 30 meters, and not 100% of the time. Over the past day, I've done FT8 QSOs normally on various bands, but when I tried 30 meters tonight I experienced the above error several times in a row. It's occurred over time using various versions of WSJT-X. The computer is a Mac running Catalina. I tried going into WSJT-X preferences and changing Radio > Split Operation from "Rig" to "Fake It," but the error persisted. I can try changing around various parts of the setup (using a Windows PC, for example), but first was curious if anyone has seen a band-specific error like this. Thanks, Frank K6FOD -- IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS, ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS." __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 auto transmit - W7RIP
If you disabled Serial Enumeration and Modem Control at Startup, as shown by screenshots in this document: https://bit.ly/FTDItip but the rig still keys when you connect the USB cable or turn on the PC, then you may need to do it again, especially if the cable was moved to a different USB port and Windows assigned a new serial port number, or a Windows Update updated the FTDI device driver. Also, uninstall any CyberPower Home UPS control software, which scans all serial ports looking for a UPS, every time the PC boots, and this will also key the rig, assuming CONFIG:PTT-KEY is set to RTS-DTR to enable computer-generated CW and PTT keying. If not, set it to OFF-OFF 73, Bob, N6TV On Mon, Apr 18, 2022, 3:51 PM Rip R wrote: > Thanks for the help W0VTT, AB7E, & K6MKF. I tried each advice as I received > it and thought I had it fixed until today. I had been switching out > antenna feeds when the rig transmitted as before. I think the changes in > the PC (Win 10 device mgr) that Mike W0VTT suggested may be the ultimate > solution; we'll see. Thanks again guys for taking the time to help me out > on this. 73s Rip W7RIP > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@arrl.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 Issue
Are you seeing and * on the KPA500 screen when using the IC-705 and the amp is in Operate mode? If so, the amp is being keyed while the IC-705 is in receive mode. Confirmed by the fact when the amp is in STBY that signals are normal. Check your amp keying interface and cable wiring. You should be able to prove and Amp Key command from the IC-705 to the KPA500. Thus when the IC-705 is keyed, likewise the amp. 73 Bob, K4TAX On 3/31/2022 6:35 PM, elecraft-requ...@mailman.qth.net wrote: Message: 17 Date: Thu, 31 Mar 2022 11:52:29 -0600 From: James Bennett To: Elecraft Reflector Reflector Subject: [Elecraft] KPA500 Issue Message-ID: Content-Type: text/plain; charset=utf-8 Having an issue with my KPA500 and a non-elecraft radio. I?ve got an Icom IC-705 connected to my KPA500 and KAT500. By dropping the 705?s output power to 4 watts and pressing Tune on the KAT500 with the amp in OPER mode, I?m able to get the tuner to give me a good match on just about all bands to my Zerofive Flagpole Vertical. Then, turning the power level up to max (10 watts) on the IC-705, the amp gives me anywhere from 210 to 250 watts output, depending on the band. And that?s fine for me right now. However, what I?m seeing is that when the amp is in OPER mode, my receive signal strength drops way, way off to the point I have to go full AF volume to hear signals. If I put the amp in STBY, signal levels go back to normal. I also notice that the amp fan doesn?t take too long to crank up to high speed, and the PA temp is sitting around 67 C. I also have a K3. When I power up the K3 and switch the antenna over to the K3 on the same band as the IC-705 - there is no drop in signal level on it when switching between OPER and STBY on the amp. And, yes, when I?m using the IC-705, I press the corresponding BAND button on the amp. OK - some further info: if I have the K3 sitting on the same band as the IC-705 this does not happen - going from STBY to OPER on the amp makes no difference on receive level on the IC-705. But if I power off the K3, the IC-705 reverts to its partially-deaf state. Somewhere long ago in a far distant galaxy, I recall Jack W6FB mentioning that the K3 pulls some signal to zero when it is powered off. I suspect that may be what is happening here but for the life of me I can?t recall the exact conversation. I?d like to get to the point where I can run the IC-705 with this tuner and amp without having the K3 in the equation, as the K3 will be going on the sale block in the near future, in anticipation of a K4D delivery. Any ideas? Jack - are you listening?:-) Jim / K7TXA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA500 Issue
Are you seeing and * on the KPA500 screen when using the IC-705 and the amp is in Operate mode? If so, the amp is being keyed while the IC-705 is in receive mode. Confirmed by the fact when the amp is in STBY that signals are normal. Check your amp keying interface and cable wiring. You should be able to prove and Amp Key command from the IC-705 to the KPA500. Thus when the IC-705 is keyed, likewise the amp. 73 Bob, K4TAX On 3/31/2022 6:35 PM, elecraft-requ...@mailman.qth.net wrote: Message: 17 Date: Thu, 31 Mar 2022 11:52:29 -0600 From: James Bennett To: Elecraft Reflector Reflector Subject: [Elecraft] KPA500 Issue Message-ID: Content-Type: text/plain; charset=utf-8 Having an issue with my KPA500 and a non-elecraft radio. I?ve got an Icom IC-705 connected to my KPA500 and KAT500. By dropping the 705?s output power to 4 watts and pressing Tune on the KAT500 with the amp in OPER mode, I?m able to get the tuner to give me a good match on just about all bands to my Zerofive Flagpole Vertical. Then, turning the power level up to max (10 watts) on the IC-705, the amp gives me anywhere from 210 to 250 watts output, depending on the band. And that?s fine for me right now. However, what I?m seeing is that when the amp is in OPER mode, my receive signal strength drops way, way off to the point I have to go full AF volume to hear signals. If I put the amp in STBY, signal levels go back to normal. I also notice that the amp fan doesn?t take too long to crank up to high speed, and the PA temp is sitting around 67 C. I also have a K3. When I power up the K3 and switch the antenna over to the K3 on the same band as the IC-705 - there is no drop in signal level on it when switching between OPER and STBY on the amp. And, yes, when I?m using the IC-705, I press the corresponding BAND button on the amp. OK - some further info: if I have the K3 sitting on the same band as the IC-705 this does not happen - going from STBY to OPER on the amp makes no difference on receive level on the IC-705. But if I power off the K3, the IC-705 reverts to its partially-deaf state. Somewhere long ago in a far distant galaxy, I recall Jack W6FB mentioning that the K3 pulls some signal to zero when it is powered off. I suspect that may be what is happening here but for the life of me I can?t recall the exact conversation. I?d like to get to the point where I can run the IC-705 with this tuner and amp without having the K3 in the equation, as the K3 will be going on the sale block in the near future, in anticipation of a K4D delivery. Any ideas? Jack - are you listening?:-) Jim / K7TXA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TCXO
The TCXO is the reference frequency for about everything that takes place in the radio. It is the master clock. If it is incorrect, then everything else is incorrect, for the most part. A 5 ppm TCXO, or 5 parts per million, can have an error of +/-250 Hz on 6 meters. Where as a 0.5 ppm TCXO can have an error of 25 Hz on 6 meters. It just depends on how accurate and stable you desire your radio to be. Oh, the frequency read-out on the front is just that, a read out. It is not a frequency measurement of the exact frequency. Many will put their radio on 14.255.000 and swear it is on that frequency. But with a 5 ppm TCXO it could be +/- 71 Hz. Where as with a 0.5 ppm it would be +/- 7 Hz. Of course one must consider crystal and component ageing and perform very easy calibration procedure at regular intervals. I check and adjust mine once a month and can maintain +/- 2 Hz or or better. I ordered mine with the 1 ppm TCXO with F/W corrected to 0.5 ppm. 73 Bob, K4TAX On 3/30/2022 3:25 PM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Wed, 30 Mar 2022 07:44:49 -0500 From: rikoski To:elecraft@mailman.qth.net Cc: Richard Rikoski Subject: [Elecraft] TCXO Message-ID:<11ce6286-6d21-47fd-9734-4b1646d35...@rikoski.com> Content-Type: text/plain; charset=us-ascii What are the uses for the TCXO option in a K3? Why would I want one? Thanks, 73 W9ZD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] A hat was saved (totally apropos of nothing)
Wow! At least you got a hat with your radio. I put down my $1500 deposit on a K4 at the 2019 Hamvention and waited almost 2 and a half years to finally receive the radio. My very first Elecraft purchase ever. When Madelyn emailed me to say the radio is ready to ship, I asked for at least a K4 lapel pin button, like the ones given away at that hamfest, or possibly a baseball cap to be thrown in with the shipment. The radio was shipped with nothing but exactly what I ordered. I guess I should be pleased with that, after the EXTREMELY LONG WAIT. Unfortunately, I was never made aware of any K4 lapel pins while at that hamfest, and it was never mentioned and I never saw anyone handing them out. I was kinda disappointed. I realize it was not all Elecraft's fault. So many issues came up during that wait period, but I also feel like the radio was announced and sold before it was truly ready for production. All that money and EXTENDED wait, and not even a "Sorry about the long wait... here's a little token of our appreciation" That would have been appreciated. Flame off. Bob, WG9L K4 #304 On 3/27/2022 8:21 PM, Bill Weaver wrote: My Elecraft hat cost $5700 but the free radio that came with it was a nice touch! 藍 73, Bill WE5P Comfortably Numb On Mar 27, 2022, at 21:07, Rich WC3T wrote: My wife in cleaning a junk bin this weekend found a “...filthy, dirty hat. Can I throw it out?” She brandished my Elecraft hat. I screamed. “I’ve been looking for that hat for months!!! You may NOT throw it out and if you do I’ll buy two more to replace it!”She gave me a long suffering glance and relinquished it. It’s now safely in my part of the closet.I thought I was going insane because I couldn’t find it. 72, Rich Hurd / WC3T / DMR: 3142737 Grid: FN20is __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to weave...@usermail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4: Do I need with a K4 digi keyer like with my K3 ?
I got rid of my external interface with my K4F. I do everything over a single USB cable connected to my Linux Mint / Windoze-7 PC. No issues. Bob, WG9L K4F #304 On 3/25/2022 6:35 AM, DJ8EW wrote: I'm waiting for my new K4D. Now I still use a K3 with an old microham 'DIGI KEYER' as interface to my PC for contest (Wintest) and logging in all modes including RTTY and digi modes and a cw-skimmer. Did I understand the K4D information correct that all these features can be done with the K4D and my windows10 PC without the DIGI KEYER hardware? Lothar, DJ8EW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Knowles HC-3 Mic Element Replacement For Heil, HC-5
Why not get a mike that DOES perform correctly and one that sounds good as well? And why not learn proper mike technique while at it? There are a multitude of good mikes on the market that really sound good and many cost less than $25. Reminds me of the incident when I was assisting a fellow ham with his audio. We tried about everything to no avail. I suggested if he had a different mike that he should try it. He did, and it sounded great. I told him that it sounded great and his response was; "well, I don't like the way it looks".. Uh, this is radio, not TV. I can't see it but I can sure hear his lousy sounding good looking mike. Mikes, like about everything else, are designed for a function and purpose. If it doesn't fit your needs as function and/or purpose, then you've selected the wrong item for the application. Thus not the fault of the item. 73 Bob, K4TAX On 3/23/2022 2:14 PM, elecraft-requ...@mailman.qth.net wrote: Message: 1 Date: Mon, 21 Mar 2022 15:15:02 -0700 From: Fred Jensen To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Knowles HC-3 Mic Element Replacement For Heil HC-5 Message-ID:<1c983dc7-13f5-b532-908f-6c9196ed0...@gmail.com> Content-Type: text/plain; charset=utf-8; format=flowed "It would be great if these elements could be modified to perform better" Au contraire, Tony.? They were designed for a particular purpose and they perform very well for that purpose.? Unfortunately, that purpose is just not normally found in ham radio. It is very hard to beat electret mics.? They're cheap, tiny, have flat responses, and tend to be immune to breath-blasts if you talk across them rather than into them. Some mics [dynamic and especially ribbon velocity mics] will emphasize the lows as you move close to them.? The classic RCA 44-BX series [fairly large, prismatic-shaped one, Johnny Carson used to have one on his desk] was particularly afflicted ... when I was 17 and on AM, I sounded like I was 17.? Crawl up very close to the -BX and I sounded like Morgan Freeman playing God in "Bruce Almighty."? There is little speech information in the low frequencies but a lot of power.? Electrets are generally less prone to this.? Most of today's rigs provide the DC bias electrets require right on the mic connector. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KPA 500
With the band switching cable between the radio and amp, the amp follows the receiver frequency/band. Thus it is not necessary key the radio or to transmit anything. The bands are loaded with miscellaneous garbage today. Why add any more? My K3S connects to my KAT500 which connects to my KPA500. Sure is a sweet and reliable system. Hard to screw up anything. 73 Bob, K4TAX On 3/23/2022 2:14 PM, elecraft-requ...@mailman.qth.net wrote: Message: 6 Date: Tue, 22 Mar 2022 10:24:59 +0100 From: F5vjc To: Elecraft Reflector Subject: [Elecraft] KPA 500 Message-ID: Content-Type: text/plain; charset="UTF-8" What is the advantage of using a band switching cable between the transceiver and the KPA500 over just relying on the RF sensing function? I want to drive my KPA500 from an FTDX 101D, is a cable the better way to go? 73 F5VJC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] A K3 on MARS Frequencies
Hello Elecraft List I just got my MARS operating "certificate". I emailed a copy of that to Elecraft Support and received some instructions on how to set the rig up to operate on those frequencies. Despite being told how to do it, the K3 is NEVER seen by the program. I have the K3 set to "USB" RS232, as directed. The Elecraft K3 Utility tool has no difficulty in comms with the rig. If anyone has done this, please email me off-list for any thoughts on the issue. Many thanks. -- 73, KD7YZ Bob EM88LL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4 Vs. Flex 6400
Before I posted my numbers, I did print the current Sherwood table. I then went across each line for the FT-DX101D, the K3S, and the FLEX 6700. I did compare 6 of the 10 or so data lines. My reason for doing this has to do with someone that posted "the FT=101D has the best receiver performance numbers". Well this is not exactly true. The K3S is consistently better than the FT-DX101D and the FLEX 6700. As to the K4D, it is much further down the list from the top 3 or 4. I fear many hams only look at the top line, brand and model and say that is best. Clearly this is not true. The top line is sorted by Dynamic Range Narrow spaced and that's all. Certainly there are factors just as important or more important data points than that. Of course there is no way to judge whistles and bells. I think more hams are enticed by whistles and bells and know little what makes for a performance radio. Secondly, factors as quality of the product, failures out of the box, service turn-a-round time, long term support, and etc. all come into play in identifying a good radio. To me that puts Elecraft at the top of the list, all facts considered. 73 Bob, K4TAX Actually, the Yaesu FTDX101D/MP has the best receiver numbers on Sherwood's list. That doesn't mean that it's the best radio for you, but the Flex and the K4 aren't "far and away" better receivers than anything else in the amateur market. Ironically, Rob seems to really like Icoms... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft K4 Vs. Flex 6400
As I read the numbers the FT-DX101D is not necessarily the top radio. Here's why: Noise Floor FT-DX101D -127 dBm Elecraft K3S -135 dBm FLEX 6700 -118 dBm AGC Threshold FT-DX101D 4.5 uV Elecraft K3S 1.5 uV FLEX 6700 4.2 uV 100kHz Blocking--- FT-DX101D 147 dB Elecraft K3S 150 dB FLEX 6700 130 dB Sensitivity FT-DX101D .60 uV Elecraft K3S .27 uV FLEX 6700 2.0 uV LO Noise - FT-DX101D 154 dBc Elecraft K3S 144 dBc FLEX 6700 145 dBc Dynamic Range wide spaced --- FT-DX1010D 110 dB Elecraft K3S 107 dB FLEX 99 dB So you see, one needs to look at ALL the numbers, not just the ranking, based on Dynamic Range narrow spaced. All numbers from Sherwood Engineering 3/7/2022 Receiver test data. 73 Bob, K4TAX On 3/7/2022 2:18 PM, elecraft-requ...@mailman.qth.net wrote: Message: 2 Date: Sat, 5 Mar 2022 21:42:35 -0600 From: Kurt Pawlikowski To:"elecraft@mailman.qth.net" Subject: Re: [Elecraft] Elecraft K4 Vs. Flex 6400 Message-ID:<6eeff195-f4ba-5836-39b5-07baecf1c...@pinrod.com> Content-Type: text/plain; charset=UTF-8; format=flowed Scott, ??? Well, yes: The "numbers" say one thing (or several things!), but, like I said, I'm in love with Elecraft... So, yes, I'm prejudiced! Of course the "top radio (FT-DX101D)" is somewhat more expensive then the 6400, and does seem to have some nice whistles and bells. Who knows? Maybe I'll do a switch to Yaesu... {'-) ??? k WB9FMC On 3/5/22 18:46, Scott Manthe wrote: Actually, the Yaesu FTDX101D/MP has the best receiver numbers on Sherwood's list. That doesn't mean that it's the best radio for you, but the Flex and the K4 aren't "far and away" better receivers than anything else in the amateur market. Ironically, Rob seems to really like Icoms... 73, Scott N9AA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] USB PTT causes strong Speaker Feedback in K3 -- SOLVED
Actually I thought I already replies solved, to this but I see no email came thru. I had, sometime, somehow, either allowed my Rescue Kitten access to the backplane of the K3s's Two Audio-cables, Or just possibly OR I totally fouled up maybe a month or two ago? I have a nice pair of Bose desktop speakers. I noticed one shielded red/white pair of RCA's went to K3 backplane Stereo 'Spkrs" jack. There was another same cable, also off the primary Bose speaker, going to, and plugged into, the backplane Line-Out-Stereo jack on the K3(s). Removed that and the problem was solved. I have no concept of why the cat, or I, would plug the speaker (B port) to the Line-out. -- Best regards, Bob KD7YZ EM88LL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] USB PTT causes strong Speaker Feedback in K3
Hello K3 List K3 upgraded to K3s. MON = 0 . When I push the PTT on the Icom SM-50 base mic, there is noticeable feedback coming from the station stereo speakers. In the past week I have not reconfigured the CONFIG or MAIN nor added/removed back-end cables. So ..since there IS feedback, I MUST have done something. But search thru config and manual I can't figure it out. Help please? -- 73, KD7YZ Bob EM88LL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] D-104 Mic Element Replacement
Most D-104 mikes are not suited for use with today's radios. The original D-104 was designed to work into a load impedance of 4 meg-ohms or higher. Today's radios microphone input is about 50k ohms or so. The result is then excessive load on the D-104 element. This is the major cause of frequency response issues. The D-104 with the TG stand {amplified mike stand} uses the FET device as a buffer, thus it is providing a very high impedance for the mike element and adequate gain to drive a 50k ohm or lower microphone input. As to replacing the D-104 element, if yours has output, likely it is OK and is suffering from the issue of improper load on the element. Remember, this mike was designed to operate with tube type microphone amplifiers, having an input impedance of several meg-ohms. The D-104 on my TUG8 stand has the original Rochelle salt element and the FET amplifier in the base. It sounds great on any of my radios. My comment is that one should use the mike such that moisture or spittal from the mouth does not accumulate on the mike face and element. Also don't leave it in a position where the equipment will heat the D-104 above room temperature and surely left in the direct sun. I frequently hear hams talking about using a D-104 with a Heil element. Fact is, it no longer is a D-104, it is a Heil HC-4 or HC-5 or whatever. 73 Bob, K4TAX On 2/23/2022 1:57 PM, elecraft-requ...@mailman.qth.net wrote: Message: 2 Date: Tue, 22 Feb 2022 17:35:58 -0500 From: Dean Adinolfi To:elecraft@mailman.qth.net Subject: Re: [Elecraft] D-104 Mic Element Replacement Message-ID: Content-Type: text/plain; charset="UTF-8" W2ENY element works great. https://www.w2eny.com/ Dean, KD3ANX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Apology
To all: I messed up big time! I failed to edit the digest to just the message to which I was responding and failed to change the Subject. While I saw my goof last evening, I'm embarrassed. 73 Bob, K4TAX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com