Re: [Flexradio] FW: Losing USB Connection and programming cw memoriesinthe shuttle pro
running xp pro sp2. all my devices are self powered so no option here and yet I have the same issue as well. On 9/6/06, NZ8J [EMAIL PROTECTED] wrote: Gary, Thanks for the tip, I went in and turned it off on each one.. that very well may be the problem.. Thanks again.. I'll report back later if that fixed the problem.. 73 Tim NZ8J - Original Message - From: Gary W Strong [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Wednesday, September 06, 2006 9:18 PM Subject: [Flexradio] FW: Losing USB Connection and programming cw memoriesinthe shuttle pro I don't have a Shuttle Pro, but I've had this problem before with a USB device. I discovered that the device needs constant power via the USB port and that the power management for the port wasn't set up right. You have to go to the Hardware tab under System Properties, click on Device Manager, go to the University Serial Bus Controller list, right-click on the USB Root Hub items one at a time (there may be several), click the Power Management tab of each, make sure the box Allow the computer to turn off this device to save power is not checked. You might also click on the Power tab and see what it says there too. I'm not saying this is the problem. It was for me for a different device with the same symptoms. I no longer experience those symptoms. Gary AI4IN -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of NZ8J Sent: Wednesday, September 06, 2006 8:05 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Losing USB Connection and programming cw memories inthe shuttle pro I am still having problems losing the USB connection. It seems to happen mostly when the radio/computer is setting idle with no activity, but has happened a couple times during qso's. I have shut off everything I thought might be the cause such as power management on the computer and any automatic update, spam blockers, etc. Still no joy... When I asked about this a few days ago there were a few folks who responded both on the list and privately that they were experiencing the same thing. Just wanted to check once again to see if anyone has stumbled across a cause for this. Also, for some reason I cannot seem to program the cw memories to work with the shuttle pro, I can program everything else ok, but the cw memories will not work. I am using 1.6.2 PowerSDR. In spite of a few glitches, I like the SDR1000 more and more each day and I find new capabilities each time I sit down to use it. 73 Tim NZ8J ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/7f8c2306/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] Latest SVN
ZS6AVM Wrote: I'm using PowerSDR SVN 659, thanks to Brian (W5AMI), who uploaded it to his Site SVN 659 is working without any glitches Where are we now with Releases (SVN's), and if possible is there a chance of getting an upload to your Site Brian, or is someone else perhaps willing to post the latest SVN to their Site ? Best regards Dave *** Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. *** -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/cf0d6419/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] NET Framework Version 2
Greetings Dave, It is my understanding that PowerSDR is written to work with Net Framework 1.1 only. Someone else can pipe in and correct me if this is an incorrect statement. 73's, Wally. At 07:54 AM 9/7/2006 +0200, you wrote: ZS6AVM Wrote: I downloaded NET Framework Version 2, and installed it, only to find that PowerSDR presented an error message, indicating the I would have to close PowerSDR My PC is running XP Pro with service pack 2 I wonder if anyone else has perhaps had a similar experience with NET Framework ver 2 I haven't tried yet, but was thinking that perhaps if I install NET Framework ver 2, and then re-install PowerSDR if that may resolve the problem. Before doing that, I will however await any direction from those who know more about PC's and software than I do, hi ! Looking fwd to hearing any comments in this regard Be seein ya Dave *** Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. *** -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/d62652f1/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- Wallace Watson [EMAIL PROTECTED] Croughton RAF Base - England -- ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] SVN 665
Hi Flexers! Thanks to Jeff and Eric for the excellent work done with creating and incorporating the latest features which focus on the very unique capabilities of SDR. Your efforts are highly appreciated! On behalf of our German group thanks to all who contributed! And this big and daily growing piece of software is for free (!) ... FlexRadio - keep going in selling (SD)radios of all kind! 73s - Klaus, DK7XL -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/8464393f/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] SVN 665
Klaus Lohmann wrote: Hi Flexers! Thanks to Jeff and Eric for the excellent work done with creating and incorporating the latest features which focus on the very unique capabilities of SDR. Your efforts are highly appreciated! On behalf of our German group thanks to all who contributed! And this big and daily growing piece of software is for free (!) ... FlexRadio - keep going in selling (SD)radios of all kind! 73s - Klaus, DK7XL Hi, I totally agree, every new release is an eagerly expected surprise and a gift. How I love this radio!!. Just a point: the display zoom level is saved at power off, but the highlight not. Thank you again and congratulations to all of us. -- 73 de Ignacio, EB4APL ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] What is 6M output power of SDR-1000?
Is there a way to enable 100 Watts on 60M? Over here we are not as restricted on 60M compared with USA regs. Dave - G0DJA Ray Andrews wrote: Jeff, There is nothing wrong with the statement, The module upgrades existing SDR-1000 transceivers to 100W on all HF bands (50W on 60 meters). The definition of HF is 3MHz to 30MHz. 6m is NOT an HF band, it is a VHF band. 73, Ray, K9DUR ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] UK Database
Hi Eric, There's a link on the RSGB website (www.rsgb.org.uk) which shows the UK allocations on all the 'normal' bands from 137kHz up to 250GHz. 60M is a bit different over here from that allocated in the USA, in that only one 'channel' is the same and we are not as restricted as to modes and power used. I'd be happy to copy the allocations, modes and power limits from my Notice of Variation and email it to you if that helps? I'm copying to the group in case anyone else wants a copy as well. Regards - Dave (G0DJA) Eric Wachsmann wrote: Mr. Ackrill, It has always been our intention to include bandplans for different areas. However, we will need help to define where the bandplans differ in order to get this done. What we probably need is someone to step up and take ownership of this idea and drive it to completion. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of David Ackrill Sent: Saturday, September 02, 2006 3:51 AM To: flexradio@flex-radio.biz Subject: [Flexradio] UK Database Hi, I remember raising the question of a bespoke database for UK bandplans, especially 60M (5MHz) where the allocation is different here than in the USA. Has anyone managed to set one up please and, if so, where can I get a copy please? At the moment I can't transmit on the 60M 'channels' that are allocated to us over here on that band. Thanks ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] NET Framework Version 2
I agree that you can use 2.0. I have been running .NET 2.0 for months without any problems. -Tim --- Integrated Technical Services Too much of everything is just enough. -Bob Barlow -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cecil Bayona Sent: Thursday, September 07, 2006 2:19 AM To: FlexRadio List Subject: Re: [Flexradio] NET Framework Version 2 [EMAIL PROTECTED] wrote: ZS6AVM Wrote: I downloaded NET Framework Version 2, and installed it, only to find that PowerSDR presented an error message, indicating the I would have to close PowerSDR My PC is running XP Pro with service pack 2 I wonder if anyone else has perhaps had a similar experience with NET Framework ver 2 I haven't tried yet, but was thinking that perhaps if I install NET Framework ver 2, and then re-install PowerSDR if that may resolve the problem. Before doing that, I will however await any direction from those who know more about PC's and software than I do, hi ! Looking fwd to hearing any comments in this regard Be seein ya Dave ** * Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ** * -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/d62652f1/atta chment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com The Flex software works with .NET 1.1 only, they are not compatible with each other. Future versions of the Flex software will use .NET 2.0 but for now you must use .NET 1.1 Both .NET 1.1 and 2.0 will co-exist so you can have both. -- Cecil KD5NWA www.qrpradio.com www.hpsdr.com Sacred Cows make the best Hamburger! Don Seglio Batuna ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] FW: Losing USB Connection and programming cw memoriesinthe shuttle pro
Guess that was not the problem, I am still experiencing the same problem this morning.. it's begining to get a little frustrating.. lost connectivity while trying to work a split dx station.. 73 Tim NZ8J - Original Message - From: NZ8J [EMAIL PROTECTED] To: Gary W Strong [EMAIL PROTECTED]; flexradio@flex-radio.biz Sent: Wednesday, September 06, 2006 11:26 PM Subject: Re: [Flexradio] FW: Losing USB Connection and programming cw memoriesinthe shuttle pro Gary, Thanks for the tip, I went in and turned it off on each one.. that very well may be the problem.. Thanks again.. I'll report back later if that fixed the problem.. 73 Tim NZ8J - Original Message - From: Gary W Strong [EMAIL PROTECTED] To: flexradio@flex-radio.biz Sent: Wednesday, September 06, 2006 9:18 PM Subject: [Flexradio] FW: Losing USB Connection and programming cw memoriesinthe shuttle pro I don't have a Shuttle Pro, but I've had this problem before with a USB device. I discovered that the device needs constant power via the USB port and that the power management for the port wasn't set up right. You have to go to the Hardware tab under System Properties, click on Device Manager, go to the University Serial Bus Controller list, right-click on the USB Root Hub items one at a time (there may be several), click the Power Management tab of each, make sure the box Allow the computer to turn off this device to save power is not checked. You might also click on the Power tab and see what it says there too. I'm not saying this is the problem. It was for me for a different device with the same symptoms. I no longer experience those symptoms. Gary AI4IN -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of NZ8J Sent: Wednesday, September 06, 2006 8:05 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Losing USB Connection and programming cw memories inthe shuttle pro I am still having problems losing the USB connection. It seems to happen mostly when the radio/computer is setting idle with no activity, but has happened a couple times during qso's. I have shut off everything I thought might be the cause such as power management on the computer and any automatic update, spam blockers, etc. Still no joy... When I asked about this a few days ago there were a few folks who responded both on the list and privately that they were experiencing the same thing. Just wanted to check once again to see if anyone has stumbled across a cause for this. Also, for some reason I cannot seem to program the cw memories to work with the shuttle pro, I can program everything else ok, but the cw memories will not work. I am using 1.6.2 PowerSDR. In spite of a few glitches, I like the SDR1000 more and more each day and I find new capabilities each time I sit down to use it. 73 Tim NZ8J ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Linear+SDR1000 Enable X2TR
The delay is included to allow you to delay for slower relays to completely close before presenting RF on the output. For most amplifiers/xvtrs, 50ms is plenty. Many work with a setting of 0ms. Your mileage may vary depending on your hardware. Eric Wachsmann FlexRadio Systems PS. Do you have the optional 300kHz filter enabled? If not, I would uncheck that box. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of Gerald Capodieci Sent: Wednesday, September 06, 2006 11:53 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Linear+SDR1000 Enable X2TR On the tab General/Options I need to enable the X2TR Please check my following settings and let me know if they should work: [x] Enable X2TR X2 Delay: = 200 [x] Enable 300khx filter I reset the X2 Delay from 500 to 200 because I couldn't stand the delay. Will 200 work OK? Jerry -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex- radio.biz/attachments/20060906/1ff6ed8f/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Latest SVN
Dave, The current SVN version is 665. Brian has agreed to do periodic updates (weekly?) to his website with the SVN versions. The best situation is to be able to use an SVN client like TortoiseSVN (setup guide available on our download page at www.flex-radio.com). However, we understand that there are some that cannot access the SVN site due to firewalls or limited internet access. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 07, 2006 1:12 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Latest SVN ZS6AVM Wrote: I'm using PowerSDR SVN 659, thanks to Brian (W5AMI), who uploaded it to his Site SVN 659 is working without any glitches Where are we now with Releases (SVN's), and if possible is there a chance of getting an upload to your Site Brian, or is someone else perhaps willing to post the latest SVN to their Site ? Best regards Dave ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] NET Framework Version 2
Dave, PowerSDR requires that the .NET Framework v1.1 be installed. However, it is not a problem to have .NET v2.0 installed as well (at least in the 3 machines that I work with). I remember others commenting along the same lines last time this came up on the reflector. The net is that you don't need v2.0 for our software, but it shouldn't hurt to have it installed as long as v1.1 remains on the system. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 07, 2006 12:54 AM To: flexradio@flex-radio.biz Subject: [Flexradio] NET Framework Version 2 ZS6AVM Wrote: I downloaded NET Framework Version 2, and installed it, only to find that PowerSDR presented an error message, indicating the I would have to close PowerSDR My PC is running XP Pro with service pack 2 I wonder if anyone else has perhaps had a similar experience with NET Framework ver 2 I haven't tried yet, but was thinking that perhaps if I install NET Framework ver 2, and then re-install PowerSDR if that may resolve the problem. Before doing that, I will however await any direction from those who know more about PC's and software than I do, hi ! Looking fwd to hearing any comments in this regard Be seein ya Dave ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Latest SVN
The complete SVN 665 can be downloaded in ZIP format at: http://w5ami.net/665.zip File is about 4 megs. Be sure to unzip is into a new empty directory, then copy your databases into it afterward. As before, files contained in this ZIP are free of viruses to the best of my knowledge. Download at your own risk. 73 Brian / w5ami On 9/7/06, Eric Wachsmann [EMAIL PROTECTED] wrote: Dave, The current SVN version is 665. Brian has agreed to do periodic updates (weekly?) to his website with the SVN versions. The best situation is to be able to use an SVN client like TortoiseSVN (setup guide available on our download page at www.flex-radio.com). However, we understand that there are some that cannot access the SVN site due to firewalls or limited internet access. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 07, 2006 1:12 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Latest SVN ZS6AVM Wrote: I'm using PowerSDR SVN 659, thanks to Brian (W5AMI), who uploaded it to his Site SVN 659 is working without any glitches Where are we now with Releases (SVN's), and if possible is there a chance of getting an upload to your Site Brian, or is someone else perhaps willing to post the latest SVN to their Site ? Best regards Dave ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- There is nothing more uncommon than common sense. -- Frank Lloyd Wright ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] What is 6M output power of SDR-1000?
In the latest SVN version, there is not a limitation that I could find other than 100w on 60m. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of David Ackrill Sent: Thursday, September 07, 2006 6:25 AM Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] What is 6M output power of SDR-1000? Is there a way to enable 100 Watts on 60M? Over here we are not as restricted on 60M compared with USA regs. Dave - G0DJA Ray Andrews wrote: Jeff, There is nothing wrong with the statement, The module upgrades existing SDR-1000 transceivers to 100W on all HF bands (50W on 60 meters). The definition of HF is 3MHz to 30MHz. 6m is NOT an HF band, it is a VHF band. 73, Ray, K9DUR ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] USB utilities
Hi Tim, I am not sure if these will help you figure out what's going on or not. Maybe they will display enough info to cut-and-paste for EricW at Flex. Give them a try and see if one of them identifies the lost connection at the time it happens: http://www.usbfireinfo.com/Download/Default.asp (free trial) http://www.sharewareconnection.com/usb-info.htm (free trial) sourceUSB http://www.sourcequest.com/ (free trial) http://www.hhdsoftware.com/usbmon.html (free trial) GL de ken n9vv ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] USB utilities USB or USB2
There are more than one protocol for USB. It's actually been around for over ten (10) years. Perhaps we need to take a good look to see if differences among them make a difference here. One thing I would suggest it to go the the control panel and install the USB hub and related software then reboot and let the software search the web for the latest drivers. Jerry Ken - N9VV [EMAIL PROTECTED] wrote: Hi Tim, I am not sure if these will help you figure out what's going on or not. Maybe they will display enough info to cut-and-paste for EricW at Flex. Give them a try and see if one of them identifies the lost connection at the time it happens: http://www.usbfireinfo.com/Download/Default.asp (free trial) http://www.sharewareconnection.com/usb-info.htm (free trial) sourceUSB http://www.sourcequest.com/ (free trial) http://www.hhdsoftware.com/usbmon.html (free trial) GL de ken n9vv ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/41f466d7/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] PowerSDR 1.6.3 SVN 665
That may be like floor 13 in all but government buildings. They skip it. Radio Station W5AMI [EMAIL PROTECTED] wrote: On 9/7/06, Tim Ellison wrote: (I wouldn't make SVN 666 too significant :-O ) I was thinking the same thing ;) Yes! I'm really glad to see the zoom and pan! One question however, and I'm sure there is a good reason; when zooming OUT, why can one not center the passband? I noticed this in Jeff's console as well, so it must be something I'm not thinking of. 73 Brian / w5ami ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/3fd97d14/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] PowerSDR 1.6.3 SVN 665
This is related to our -11kHz offset. This gives us rails of High: sample_rate/2-if-spur_reduction_width Low: -sample_rate/2-if+spur_reduction_width At 96kHz, this figures to High: 33924 and Low: -55974, hence the lop-sided view. Note that when you scale all the way out, the -11kHz hump is directly in the center. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of Radio Station W5AMI Sent: Thursday, September 07, 2006 11:45 AM To: FlexRadio List Subject: Re: [Flexradio] PowerSDR 1.6.3 SVN 665 On 9/7/06, Tim Ellison [EMAIL PROTECTED] wrote: (I wouldn't make SVN 666 too significant :-O ) I was thinking the same thing ;) Yes! I'm really glad to see the zoom and pan! One question however, and I'm sure there is a good reason; when zooming OUT, why can one not center the passband? I noticed this in Jeff's console as well, so it must be something I'm not thinking of. 73 Brian / w5ami ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] PowerSDR 1.6.3 SVN 665
Okay Eric. Thanks for the explanation. Makes sense to me now. Brian On 9/7/06, Eric Wachsmann [EMAIL PROTECTED] wrote: This is related to our -11kHz offset. This gives us rails of High: sample_rate/2-if-spur_reduction_width Low: -sample_rate/2-if+spur_reduction_width At 96kHz, this figures to High: 33924 and Low: -55974, hence the lop-sided view. Note that when you scale all the way out, the -11kHz hump is directly in the center. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of Radio Station W5AMI Sent: Thursday, September 07, 2006 11:45 AM To: FlexRadio List Subject: Re: [Flexradio] PowerSDR 1.6.3 SVN 665 On 9/7/06, Tim Ellison [EMAIL PROTECTED] wrote: (I wouldn't make SVN 666 too significant :-O ) I was thinking the same thing ;) Yes! I'm really glad to see the zoom and pan! One question however, and I'm sure there is a good reason; when zooming OUT, why can one not center the passband? I noticed this in Jeff's console as well, so it must be something I'm not thinking of. 73 Brian / w5ami ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- There is nothing more uncommon than common sense. -- Frank Lloyd Wright ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] SDR-1000 and TVI
It seems that since installing the SDR-1000 w/ 100W amplifier, I now have TVI on my DirecTV satellite system. I have tried, and am currently using the S-vieo out to the AV input on my TV which would seem to be the best choice. I would appreciate hearing from anyone who might have suggestions and/or cures. As far as I know at present, the XYL is the only one that has noticed it (no neighbors yet). I am thinking a low-pass filter in the line out to the antennas might be in order. My shack is second story so the ground is not optimal although it is #6 copper to an 8' driven ground as direct as possible from the shack to the ground. I would have thought a satellite system would be the least succeptible of all to TVI. Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] SVN 667
Wow!!! Great job guys... And I have a club meeting tonight so can't play too long... Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] SDR-1000 and TVI
What ever you do, don't connect an RF ground from a second story window. That make a nice RF radiator What type of antenna are you using on the SDR1K and how close is it to the DTV dish? -Tim --- Tim Ellison Integrated Technical Services -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim, W4ATK Sent: Thursday, September 07, 2006 4:32 PM To: Flex-radio Reflector Subject: [Flexradio] SDR-1000 and TVI It seems that since installing the SDR-1000 w/ 100W amplifier, I now have TVI on my DirecTV satellite system. I have tried, and am currently using the S-vieo out to the AV input on my TV which would seem to be the best choice. I would appreciate hearing from anyone who might have suggestions and/or cures. As far as I know at present, the XYL is the only one that has noticed it (no neighbors yet). I am thinking a low-pass filter in the line out to the antennas might be in order. My shack is second story so the ground is not optimal although it is #6 copper to an 8' driven ground as direct as possible from the shack to the ground. I would have thought a satellite system would be the least succeptible of all to TVI. Jim, W4ATK ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] PowerSDR 1.6.3 SVN 665
The FCC office here in Dallas use to be on the 13th floor of the Federal Building until they moved to a location out on LBJ freeway (635). Bill AD5OL - Original Message From: Gerald Capodieci [EMAIL PROTECTED] To: Radio Station W5AMI [EMAIL PROTECTED]; FlexRadio List flexradio@flex-radio.biz Sent: Thursday, September 7, 2006 11:54:23 AM Subject: Re: [Flexradio] PowerSDR 1.6.3 SVN 665 That may be like floor 13 in all but government buildings. They skip it. Radio Station W5AMI [EMAIL PROTECTED] wrote: On 9/7/06, Tim Ellison wrote: (I wouldn't make SVN 666 too significant :-O ) I was thinking the same thing ;) Yes! I'm really glad to see the zoom and pan! One question however, and I'm sure there is a good reason; when zooming OUT, why can one not center the passband? I noticed this in Jeff's console as well, so it must be something I'm not thinking of. 73 Brian / w5ami ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/3fd97d14/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/639be7aa/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] Pan and Zoom
Software guys, You people are something else! The FlexRadio has always been fun, but the last couple of months, it's been getting even better! Great job on the pan and zoom - very intuitive and nicely implemented - great idea using sliders. Thanks!! Mark ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Pan and Zoom
Let's give credit where it is due. Jeff Anderson, K6JCA, implemented all of the pan and zoom controls in his variant on our console several months ago. We're just getting around to implementing them in the main console. Give a huge thanks to Jeff Anderson if you like the display improvements as he did 95% of the work. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of Mark Amos Sent: Thursday, September 07, 2006 5:46 PM To: 'FlexRadio List' Subject: [Flexradio] Pan and Zoom Software guys, You people are something else! The FlexRadio has always been fun, but the last couple of months, it's been getting even better! Great job on the pan and zoom - very intuitive and nicely implemented - great idea using sliders. Thanks!! Mark ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Pan and Zoom
Absolutely - nice job, Jeff! It's really cool to see these ideas getting merged into the commercial product! Mark -Original Message- From: Eric Wachsmann [mailto:[EMAIL PROTECTED] Sent: Thursday, September 07, 2006 6:53 PM To: 'Mark Amos'; 'FlexRadio List' Subject: RE: [Flexradio] Pan and Zoom Let's give credit where it is due. Jeff Anderson, K6JCA, implemented all of the pan and zoom controls in his variant on our console several months ago. We're just getting around to implementing them in the main console. Give a huge thanks to Jeff Anderson if you like the display improvements as he did 95% of the work. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of Mark Amos Sent: Thursday, September 07, 2006 5:46 PM To: 'FlexRadio List' Subject: [Flexradio] Pan and Zoom Software guys, You people are something else! The FlexRadio has always been fun, but the last couple of months, it's been getting even better! Great job on the pan and zoom - very intuitive and nicely implemented - great idea using sliders. Thanks!! Mark ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] Fatal Error on 668
I get an out of index fatal error while the PowerSDR is loading, never gets totally loaded before it blows up. This in on the latest SVN 668. Was working with the previous SVN versions. Anyone else get this or just me? Dont want to submit an official bug report if its getting fixed in SVN 669. Index was out of Range Must be a non-negative and less than the size of the collection. Parameter name: index. This is followed by lots of other error stuff. 73 and GL Mike- KM0T ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Fatal Error on 668
SVN 668 is working well here. Maybe there is something in the database that is out of whack related to the new 50 MHz transverter code (I don't use them and I know you do). Does it do it with a new DB? -Tim --- Tim Ellison Integrated Technical Services -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike King - KM0T Sent: Thursday, September 07, 2006 7:13 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Fatal Error on 668 I get an out of index fatal error while the PowerSDR is loading, never gets totally loaded before it blows up. This in on the latest SVN 668. Was working with the previous SVN versions. Anyone else get this or just me? Dont want to submit an official bug report if its getting fixed in SVN 669. Index was out of Range Must be a non-negative and less than the size of the collection. Parameter name: index. This is followed by lots of other error stuff. 73 and GL Mike- KM0T ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] Download and install Tortoise SVN
Am just getting around to using SVN. Am following the instructios from Flex website and all goes well until I get to SVN Checkout where I get the following mesageNo connection could be made because the target machine actively refused it. What am I doing wrong ? Thanks , Art - Stay in the know. Pulse on the new Yahoo.com. Check it out. -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/fa45705a/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Download and install Tortoise SVN
Make absolutely certain that you copied the url correctly as it is case-sensitive (typos are common on the IP address near the beginning too). You may want to just copy+paste the url as that is a fail-safe way to go. If it is not the address, you may have some kind of firewall up that is preventing you from connecting (though this is not what the error seems to indicate). Let us know what you find. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 07, 2006 7:39 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Download and install Tortoise SVN Am just getting around to using SVN. Am following the instructios from Flex website and all goes well until I get to SVN Checkout where I get the following mesageNo connection could be made because the target machine actively refused it. What am I doing wrong ? Thanks , Art - Stay in the know. Pulse on the new Yahoo.com. Check it out. -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex- radio.biz/attachments/20060907/fa45705a/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] 1.6.3 SVN 668 - Includes some great enhancements
Wow, I like it. Thanks for the new panadaper frequency scale and the zoom/pan sliders. This console is really becoming ever more powerful and ever easier to use for the more casual 1 RX at a time radioing. Duane N9DG __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] PowerSDR 1.6.3 SVN 665
Just trying out SVN 665 (thanks W5AMI for the zip). I've turned conservative of late, sticking to the official releases only. I've simply let all the recent betas kind of wash over me, undiscovered. Wow. A great deal of what I had been asking for has been implemented (particularly the pan/zoom features of the panadapter and more to be discovered, I'm sure). Thanks to all who were involved. Larry WO0Z ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
[Flexradio] LDG AT-200PC
I was looking over the LDG website tonight and I ran across the LDG AT-200PC. The 200PC is an auto tuner that is controlled from the PC. It has 2 channels that allow for 2 antennas, and it remembers the tuning for each of those antennas. One thing that I miss in the SDR-1000 is the ability to have a second antenna such as a Beveredge on RX. This device it seems to me would make an ideal addition to the SDR-1000, as the software could allow the ability to choose the antenna, and the tuner could easily be controlled from PowerSDR. I wonder if there is any development along these lines? 73 W9OY __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
Re: [Flexradio] Download and install Tortoise SVN
Thanks for the quick responses. It was the Norton firewall. Turned it off and all is well !! Thanks and 73, Art FlexRadio - Eric [EMAIL PROTECTED] wrote: Make absolutely certain that you copied the url correctly as it is case-sensitive (typos are common on the IP address near the beginning too). You may want to just copy+paste the url as that is a fail-safe way to go. If it is not the address, you may have some kind of firewall up that is preventing you from connecting (though this is not what the error seems to indicate). Let us know what you find. Eric Wachsmann FlexRadio Systems -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] radio.biz] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 07, 2006 7:39 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Download and install Tortoise SVN Am just getting around to using SVN. Am following the instructios from Flex website and all goes well until I get to SVN Checkout where I get the following mesageNo connection could be made because the target machine actively refused it. What am I doing wrong ? Thanks , Art - Stay in the know. Pulse on the new Yahoo.com. Check it out. -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex- radio.biz/attachments/20060907/fa45705a/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com - Get your email and more, right on the new Yahoo.com -- next part -- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060907/7beaed25/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com