from:"George, Brenda"

I have attached the images that I refer to in the email below.
From: George, Brenda (CAI)
Sent: Wednesday, October 23, 2013 1:58 PM
To: framers@lists.frameusers.com
Subject: Structured FM 11 Font Replacement issue

I am attempting to import an xml feed into a Structured FrameMaker 11 template. 
This is an automated process. When I attempt to do this I am getting an error 
message that reads:
Emph element definition not found
and the xml feed is not processing. (See attachment for image of error message)
Prior to attempting to import this xml feed, I needed to replace 2 font 
families in the FM 11 template with newer versions of these fonts:
Imago Book
Bembo
These have been replaced with Imago BQ and with Bembo Std.
I updated the old fonts in the FM 11 templates using Paragraph designer. After 
I did this, I am finding that I am getting a FrameMaker 11 console indicating 
that the old version of the fonts that I updated is not available and that a 
substitute font will be used. (Please refer to the attached image named 
font_error_message.
If I open the FrameMaker template with the updated fonts, I am getting a 
message that reads:
Document named FLFactSheet_Allocation_template.fm uses unavailable fonts.
To reformat the document using available  fonts, click OK
I replaced all of the old fonts in the paragraph designer, so I'm not sure why 
I am getting this message.
Is there a step in the process for replacing fonts in Structured FM 11 that I 
am missing?
Please note that there are 2 fonts that are missing from the set of fonts that 
I am using:
Zapfsdingbats and Courier.
Any help will be appreciated.
Thanks.
Brenda George

Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.attachment: font_error_message.pngattachment: emph_error_message.png___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Structured FM 11 Font Replacement issue

I am attempting to import an xml feed into a Structured FrameMaker 11 template. 
This is an automated process. When I attempt to do this I am getting an error 
message that reads:
Emph element definition not found
and the xml feed is not processing. (See attachment for image of error message)
Prior to attempting to import this xml feed, I needed to replace 2 font 
families in the FM 11 template with newer versions of these fonts:
Imago Book
Bembo
These have been replaced with Imago BQ and with Bembo Std.
I updated the old fonts in the FM 11 templates using Paragraph designer. After 
I did this, I am finding that I am getting a FrameMaker 11 console indicating 
that the old version of the fonts that I updated is not available and that a 
substitute font will be used. (Please refer to the attached image named 
font_error_message.
If I open the FrameMaker template with the updated fonts, I am getting a 
message that reads:
Document named FLFactSheet_Allocation_template.fm uses unavailable fonts.
To reformat the document using available  fonts, click OK
I replaced all of the old fonts in the paragraph designer, so I'm not sure why 
I am getting this message.
Is there a step in the process for replacing fonts in Structured FM 11 that I 
am missing?
Please note that there are 2 fonts that are missing from the set of fonts that 
I am using:
Zapfsdingbats and Courier.
Any help will be appreciated.
Thanks.
Brenda George


Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FW: Structured FM 11 Font Replacement issue

I have attached the images that I refer to in the email below.
From: George, Brenda (CAI)
Sent: Wednesday, October 23, 2013 1:58 PM
To: framers at lists.frameusers.com
Subject: Structured FM 11 Font Replacement issue

I am attempting to import an xml feed into a Structured FrameMaker 11 template. 
This is an automated process. When I attempt to do this I am getting an error 
message that reads:
"Emph" element definition not found
and the xml feed is not processing. (See attachment for image of error message)
Prior to attempting to import this xml feed, I needed to replace 2 font 
families in the FM 11 template with newer versions of these fonts:
Imago Book
Bembo
These have been replaced with Imago BQ and with Bembo Std.
I updated the old fonts in the FM 11 templates using Paragraph designer. After 
I did this, I am finding that I am getting a FrameMaker 11 console indicating 
that the old version of the fonts that I updated is not available and that a 
substitute font will be used. (Please refer to the attached image named 
"font_error_message".
If I open the FrameMaker template with the updated fonts, I am getting a 
message that reads:
Document named FLFactSheet_Allocation_template.fm uses unavailable fonts.
To reformat the document using available  fonts, click OK
I replaced all of the old fonts in the paragraph designer, so I'm not sure why 
I am getting this message.
Is there a step in the process for replacing fonts in Structured FM 11 that I 
am missing?
Please note that there are 2 fonts that are missing from the set of fonts that 
I am using:
Zapfsdingbats and Courier.
Any help will be appreciated.
Thanks.
Brenda George

Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131023/e5866d8b/attachment.html>
-- next part --
A non-text attachment was scrubbed...
Name: font_error_message.png
Type: image/png
Size: 20049 bytes
Desc: font_error_message.png
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131023/e5866d8b/attachment.png>
-- next part --
A non-text attachment was scrubbed...
Name: emph_error_message.png
Type: image/png
Size: 4407 bytes
Desc: emph_error_message.png
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131023/e5866d8b/attachment-0001.png>

Structured FM 11 Font Replacement issue

I am attempting to import an xml feed into a Structured FrameMaker 11 template. 
This is an automated process. When I attempt to do this I am getting an error 
message that reads:
"Emph" element definition not found
and the xml feed is not processing. (See attachment for image of error message)
Prior to attempting to import this xml feed, I needed to replace 2 font 
families in the FM 11 template with newer versions of these fonts:
Imago Book
Bembo
These have been replaced with Imago BQ and with Bembo Std.
I updated the old fonts in the FM 11 templates using Paragraph designer. After 
I did this, I am finding that I am getting a FrameMaker 11 console indicating 
that the old version of the fonts that I updated is not available and that a 
substitute font will be used. (Please refer to the attached image named 
"font_error_message".
If I open the FrameMaker template with the updated fonts, I am getting a 
message that reads:
Document named FLFactSheet_Allocation_template.fm uses unavailable fonts.
To reformat the document using available  fonts, click OK
I replaced all of the old fonts in the paragraph designer, so I'm not sure why 
I am getting this message.
Is there a step in the process for replacing fonts in Structured FM 11 that I 
am missing?
Please note that there are 2 fonts that are missing from the set of fonts that 
I am using:
Zapfsdingbats and Courier.
Any help will be appreciated.
Thanks.
Brenda George


Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

RE: Structured FrameMaker 11 Error Console

2013-10-14 Thread George, Brenda (CAI)

I have attached a screen capture of the top one of the XML files that I import. 
When you mention the content model specified at the top of the file are you 
referring to the DocType? There is a large set of Doctypes that I need to add 
to the FrameMaker 11 structured applications file. I tried adding one of these 
and then importing the xml file that corresponds to it. I am still getting the 
error messages in the console and if I format, save, and then reopen the 
FrameMaker 11 file that I imported, I am losing the formatting, so the problem 
still exists.




From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

[cid:image001.png@01CEC8B9.720A36A0]http://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 [cid:image002.png@01CEC8B9.720A36A0] 
http://www.linkedin.com/in/mattrsullivan 
LinkedInhttp://www.linkedin.com/in/mattrsullivan 
[cid:image003.png@01CEC8B9.720A36A0] http://www.facebook.com/mattrsullivan 
facebookhttp://www.facebook.com/mattrsullivan 
[cid:image004.png@01CEC8B9.720A36A0] http://mattrsullivan.com/ 
mattrsullivan.comhttp://mattrsullivan.com/

On Oct 11, 2013, at 7:35 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.comhttp://mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.commailto:framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

image001.pnghttp://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 
image002.pnghttp://www.linkedin.com/in/mattrsullivanLinkedInhttp://www.linkedin.com/in/mattrsullivan
 
image003.pnghttp://www.facebook.com/mattrsullivanfacebookhttp://www.facebook.com/mattrsullivan
 
image004.pnghttp://mattrsullivan.com/mattrsullivan.comhttp://mattrsullivan.com/

On Oct 10, 2013, at 11:16 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo

Structured FrameMaker 11 Error Console

2013-10-14 Thread George, Brenda (CAI)

I have attached a screen capture of the top one of the XML files that I import. 
When you mention the content model specified at the top of the file are you 
referring to the DocType? There is a large set of Doctypes that I need to add 
to the FrameMaker 11 structured applications file. I tried adding one of these 
and then importing the xml file that corresponds to it. I am still getting the 
error messages in the console and if I format, save, and then reopen the 
FrameMaker 11 file that I imported, I am losing the formatting, so the problem 
still exists.




From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC8B9.720A36A0]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC8B9.720A36A0] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC8B9.720A36A0] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC8B9.720A36A0] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com<http://mattrsullivan.com>]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 
<http://www.linkedin.com/in/mattrsullivan>LinkedIn<http://www.linkedin.com/in/mattrsullivan>
 
<http://www.facebook.com/mattrsullivan>facebook<http://www.facebook.com/mattrsullivan>
 
<http://mattrsullivan.com/>mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameM

RE: Structured FrameMaker 11 Error Console

2013-10-11 Thread George, Brenda (CAI)

Thanks for the information.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

[cid:image001.png@01CEC674.B8E51550]http://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 [cid:image002.png@01CEC674.B8E51550] 
http://www.linkedin.com/in/mattrsullivan 
LinkedInhttp://www.linkedin.com/in/mattrsullivan 
[cid:image003.png@01CEC674.B8E51550] http://www.facebook.com/mattrsullivan 
facebookhttp://www.facebook.com/mattrsullivan 
[cid:image004.png@01CEC674.B8E51550] http://mattrsullivan.com/ 
mattrsullivan.comhttp://mattrsullivan.com/

On Oct 11, 2013, at 7:35 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:

The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.comhttp://mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.commailto:framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

image001.pnghttp://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan

image002.pnghttp://www.linkedin.com/in/mattrsullivanLinkedInhttp://www.linkedin.com/in/mattrsullivan

image003.pnghttp://www.facebook.com/mattrsullivanfacebookhttp://www.facebook.com/mattrsullivan

image004.pnghttp://mattrsullivan.com/mattrsullivan.comhttp://mattrsullivan.com/

On Oct 10, 2013, at 11:16 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:

I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
not...@federatedinv.commailto:not...@federatedinv.com and then delete this 
message from your system. Saving, copying or disseminating an inadvertently 
received email could violate state and Federal

Structured FrameMaker 11 Error Console

2013-10-11 Thread George, Brenda (CAI)

Thanks for the information.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC674.B8E51550]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC674.B8E51550] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC674.B8E51550] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC674.B8E51550] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:

The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com<http://mattrsullivan.com>]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>

<http://www.linkedin.com/in/mattrsullivan>LinkedIn<http://www.linkedin.com/in/mattrsullivan>

<http://www.facebook.com/mattrsullivan>facebook<http://www.facebook.com/mattrsullivan>

<http://mattrsullivan.com/>mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:

I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
notify at federatedinv.co

Structured FrameMaker 11 Error Console

2013-10-11 Thread George, Brenda (CAI)

The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC66D.8A6828E0]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC66D.8A6828E0] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC66D.8A6828E0] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC66D.8A6828E0] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:


I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
notify at federatedinv.com<mailto:notify at federatedinv.com> and then delete 
this message from your system. Saving, copying or disseminating an 
inadvertently received email could violate state and Federal privacy laws. All 
emails received by or sent from Federated may be provided to regulators or law 
enforcement agencies, or used for other purposes consistent with Federated's 
business interests. Thank you for your 
cooperation.___


You are currently subscribed to framers as matt at 
mattrsullivan.com<mailto:matt at mattrsullivan.com>.

Send list messages to framers at lists.frameusers.com<mailto:framers at 
lists.frameusers.com>.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at 
lists.frameusers.com>
or visit 
http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com

Send administrative questions to listadmin at frameusers.com<mailto:listadmin 
at frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131011/cbc51b84/attachment.html>
-- next part --
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1331 bytes
Desc: image001.png
URL: 
<http://lists.frameusers.com/pipermail/framers/attachm

Structured FrameMaker 11 Error Console

2013-10-10 Thread George, Brenda (CAI)

I am performing testing in a Windows 7 environment with Structured FrameMaker
11.

I am using an internally automated process that imports an xml feed into a
FrameMaker template and produces a formatted FrameMaker document. The
FrameMaker 11 error console window that is displaying contains a long list of
errors. This is my first time working with FrameMaker 11 and this error
console window. I have attached a screen capture of the error console with the
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an
error is occurring. I'm assuming that these line numbers correspond with the
line numbers that can be made visible in the FrameMaker document by choosing
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com

Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.attachment: FrameMaker11_Error_console.png___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Structured FrameMaker 11 Error Console

2013-10-10 Thread George, Brenda (CAI)

I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: FrameMaker11_Error_console.png
Type: image/png
Size: 35485 bytes
Desc: FrameMaker11_Error_console.png
URL:

Issues Using Windows 7 and FrameMaker 8 FrameMaker 11

2013-07-04 Thread George, Brenda (CAI)

The office where I work uses an automated process to import xml files into 
FrameMaker 8 and process them into formatted FrameMaker files. This automated 
process has been created internally, utilizing scripts written in C. We have 
been using Windows XP and FrameMaker 8 in order to run this process. We want to 
upgrade to Windows 7. On a test computer using Windows 7 we attempted to run 
this process with FrameMaker 8. FrameMaker was loading the xml file but the xml 
file was not processing into a formatted FrameMaker file. We attempted to run 
this using FrameMaker 11 and the xml file was not processing.

Does anyone have any idea why we can't run this automated program using Windows 
7?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Issues Using Windows 7 and FrameMaker 8 & FrameMaker 11

2013-07-03 Thread George, Brenda (CAI)

The office where I work uses an automated process to import xml files into 
FrameMaker 8 and process them into formatted FrameMaker files. This automated 
process has been created internally, utilizing scripts written in C. We have 
been using Windows XP and FrameMaker 8 in order to run this process. We want to 
upgrade to Windows 7. On a test computer using Windows 7 we attempted to run 
this process with FrameMaker 8. FrameMaker was loading the xml file but the xml 
file was not processing into a formatted FrameMaker file. We attempted to run 
this using FrameMaker 11 and the xml file was not processing.

Does anyone have any idea why we can't run this automated program using Windows 
7?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

FrameMaker 8 Table subheads

2013-03-21 Thread George, Brenda (CAI)

I am working with Structured FrameMaker 8. I need to redesign a table so that 
the rows in the table that display subheads are formatted differently from the 
table header. The table header has white text on a 100% blue background. The 
subheads need to be white text on a 30% blue background. The number of rows 
that appear under each subhead vary, and these rows need to have black text on 
a white background. How do I create the table subheads? The tables are created 
automatically when an xml file is imported into FrameMaker.

I am thinking that I can create the subhead 30% blue bar by creating a graphic 
on the reference page, and then applying it to a paragragh tag. The problem 
with this is that I can't figure out how to offset the text so that it is 
centered vertically in the subhead bar.

Any suggestions will be appreciated.

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker 8 Table subheads

2013-03-21 Thread George, Brenda (CAI)

I am working with Structured FrameMaker 8. I need to redesign a table so that 
the rows in the table that display subheads are formatted differently from the 
table header. The table header has white text on a 100% blue background. The 
subheads need to be white text on a 30% blue background. The number of rows 
that appear under each subhead vary, and these rows need to have black text on 
a white background. How do I create the table subheads? The tables are created 
automatically when an xml file is imported into FrameMaker.

I am thinking that I can create the subhead 30% blue bar by creating a graphic 
on the reference page, and then applying it to a paragragh tag. The problem 
with this is that I can't figure out how to offset the text so that it is 
centered vertically in the subhead bar.

Any suggestions will be appreciated.

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

Postcripted FrameMaker 8 Colors Converting from Spot Colors to CMYK

2013-01-09 Thread George, Brenda (CAI)

I am working with Structured FrameMaker 8 files in which all of the colors are 
set as spot colors. Some of the spot colors in a postscripted FrameMaker 8 file 
processed as CMYK files when the postscripted version of the file was sent to 
the print vendor yesterday. This did not occur with past postscripted files 
that have been sent to the print vendor. The postscript files are generated 
directly from FrameMaker files. The final FrameMaker files are created by 
flowing an xml feed into a Structured FrameMaker template. This process is 
performed every 3 months. In the past the print vendor has had no issues with 
the colors in the postscripted files. I have compared the FrameMaker color 
definitions in the FrameMaker files processed 3 months ago with the color 
definitions in the FrameMaker files processed yesterday. I'm not seeing any 
differences in the color definitions in FrameMaker.

We recently upgraded our Adobe Acrobat and distiller to version 10.1.3. I was 
told that the postscripting process does not utilize Adobe Acrobat and 
distiller, so the color issue would not be tied into this upgrade.

I needed to update some text on the FrameMaker template for this quarter, so 
the new FrameMaker files were generated from this revised template. I did not 
modify color in the template, so I am not certain that the modified template is 
the problem.

Does anyone have any ideas what might be creating this color conversion issue?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Postcripted FrameMaker 8 Colors Converting from Spot Colors to CMYK

2013-01-09 Thread George, Brenda (CAI)

I am working with Structured FrameMaker 8 files in which all of the colors are 
set as spot colors. Some of the spot colors in a postscripted FrameMaker 8 file 
processed as CMYK files when the postscripted version of the file was sent to 
the print vendor yesterday. This did not occur with past postscripted files 
that have been sent to the print vendor. The postscript files are generated 
directly from FrameMaker files. The final FrameMaker files are created by 
flowing an xml feed into a Structured FrameMaker template. This process is 
performed every 3 months. In the past the print vendor has had no issues with 
the colors in the postscripted files. I have compared the FrameMaker color 
definitions in the FrameMaker files processed 3 months ago with the color 
definitions in the FrameMaker files processed yesterday. I'm not seeing any 
differences in the color definitions in FrameMaker.

We recently upgraded our Adobe Acrobat and distiller to version 10.1.3. I was 
told that the postscripting process does not utilize Adobe Acrobat and 
distiller, so the color issue would not be tied into this upgrade.

I needed to update some text on the FrameMaker template for this quarter, so 
the new FrameMaker files were generated from this revised template. I did not 
modify color in the template, so I am not certain that the modified template is 
the problem.

Does anyone have any ideas what might be creating this color conversion issue?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

FrameMaker 8 - Invalid Allocation Size

2012-08-15 Thread George, Brenda (CAI)

When I was using Structured FrameMaker 8, the error message on the attached 
file displayed indicating that the allocation size in FrameMaker.exe is invalid.

How can I fix this?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.attachment: error.PNG___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker 8 - Invalid Allocation Size

2012-08-15 Thread George, Brenda (CAI)

When I was using Structured FrameMaker 8, the error message on the attached 
file displayed indicating that the allocation size in FrameMaker.exe is invalid.

How can I fix this?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: error.PNG
Type: image/png
Size: 11277 bytes
Desc: error.PNG
URL:

FrameMaker debug Error - Invalid allocation size

2012-05-08 Thread George, Brenda (CAI)

When I was using Structured FrameMaker 8, the error message on the attached 
file displayed indicating that the allocation size in FrameMaker.exe is invalid.

How can I fix this?


Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.attachment: untitled.PNG___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker debug Error - Invalid allocation size

2012-05-08 Thread George, Brenda (CAI)

When I was using Structured FrameMaker 8, the error message on the attached 
file displayed indicating that the allocation size in FrameMaker.exe is invalid.

How can I fix this?


Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: untitled.PNG
Type: image/png
Size: 11105 bytes
Desc: untitled.PNG
URL:

Structured FrameMaker 8: Table Design Issues

2012-02-22 Thread George, Brenda (CAI)

I am working in Structured FrameMaker 8 with FrameMaker templates that embeds 
into a table a 2 pt vertical line that separates 2 columns of data when an xml 
file is imported into the template. These templates were created by another 
person, and I am trying to embed this vertical line in another template and 
can't figure out how to do it.

I noticed that the following xml markup - rule=yes - needs to be included in 
order for the vertical line to appear in the table. The markup looks like this:
columnhead rule=yes colspan=2

If I remove the rule=yes from the markup, the line does not appear in the 
FrameMaker file that is built from the imported xml file.

What do I need to do so that this vertical line appears in the table flowed 
into the template that I have created?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Structured FrameMaker 8: Table Design Issues

2012-02-22 Thread George, Brenda (CAI)

I am working in Structured FrameMaker 8 with FrameMaker templates that embeds 
into a table a 2 pt vertical line that separates 2 columns of data when an xml 
file is imported into the template. These templates were created by another 
person, and I am trying to embed this vertical line in another template and 
can't figure out how to do it.

I noticed that the following xml markup - rule="yes" - needs to be included in 
order for the vertical line to appear in the table. The markup looks like this:


If I remove the rule="yes" from the markup, the line does not appear in the 
FrameMaker file that is built from the imported xml file.

What do I need to do so that this vertical line appears in the table flowed 
into the template that I have created?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

Error Due to missing tag

2011-12-15 Thread George, Brenda (CAI)

I am encountering these error messages when I flow an xml file into Structured 
FrameMaker 8:

Internal Error: 8004, 6345644, 8487696, 0

and

Adobe FrameMaker (Structured): FrameMaker.exe - Application Error:
The instruction at 0x00cc1940 referenced memory at 0x. The memory 
could not be read.

I have located the problem in the xml markup. The errors are due to a missing 
subhead tag within an element named holdings.
If I place a subhead/ tag in the markup the xml flows without problems. I 
have tried to modify the DTD and the EDD holdings declaration so that the 
subhead element is optional within holdings. I have tried a number of different 
declarations. None of them seem to be working.

The declarations currently are set like this:
The DTD declaration is this:
!ELEMENT holdings  (mainhead, (subhead?)*, (table*))*

The EDD declaration is this:
Element (Container): holdings
General rule: (mainhead, (subhead?)*, (table*))*

It is still throwing these errors for the holdings markup that does not include 
a subhead tag.

Recently a dll file called Marketing.dll was updated and replaced the 
previous Marketing.dll file. When I flow the xml using this revised dll file it 
throws the error. When I flow the data using the previous dll file it does not 
throw the error.

Can this problem be resolved by modifying the holdings declarations in the DTD 
and EDD, or is the problem tied into the revised dll file?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Error Due to missing tag

2011-12-15 Thread George, Brenda (CAI)

I am encountering these error messages when I flow an xml file into Structured 
FrameMaker 8:

Internal Error: 8004, 6345644, 8487696, 0

and

Adobe FrameMaker (Structured): FrameMaker.exe - Application Error:
The instruction at "0x00cc1940" referenced memory at "0x". The memory 
could not be read.

I have located the problem in the xml markup. The errors are due to a missing 
 tag within an element named .
If I place a  tag in the markup the xml flows without problems. I 
have tried to modify the DTD and the EDD holdings declaration so that the 
subhead element is optional within holdings. I have tried a number of different 
declarations. None of them seem to be working.

The declarations currently are set like this:
The DTD declaration is this:


The EDD declaration is this:
Element (Container): holdings
General rule: (mainhead, (subhead?)*, (table*))*

It is still throwing these errors for the holdings markup that does not include 
a subhead tag.

Recently a dll file called "Marketing.dll" was updated and replaced the 
previous Marketing.dll file. When I flow the xml using this revised dll file it 
throws the error. When I flow the data using the previous dll file it does not 
throw the error.

Can this problem be resolved by modifying the holdings declarations in the DTD 
and EDD, or is the problem tied into the revised dll file?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com

-- next part --
An HTML attachment was scrubbed...
URL:

Separating data in a Single FrameMaker File

2011-10-17 Thread George, Brenda (CAI)

We are attempting to take a FrameMaker file that contains a large number of 
individual mutual fund files and break out each mutual fund into individual 
files.

There is an automated process that was internally created to do this, but it is 
not functioning properly. In order to break out each file we use each funds 
unique product code. In addition to separating each fund the program also 
removed sector tabs in each file and the page numbers.

Is there a fast way that we can break this data out within a FrameMaker file?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Separating data in a Single FrameMaker File

2011-10-17 Thread George, Brenda (CAI)

We are attempting to take a FrameMaker file that contains a large number of 
individual mutual fund files and break out each mutual fund into individual 
files.

There is an automated process that was internally created to do this, but it is 
not functioning properly. In order to break out each file we use each funds 
unique product code. In addition to separating each fund the program also 
removed sector tabs in each file and the page numbers.

Is there a fast way that we can break this data out within a FrameMaker file?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

FrameMaker menu bar issue

2011-10-06 Thread George, Brenda (CAI)

On my FrameMaker menu bar, I have noticed that a selection is missing from the 
choice list of a Marketing menu bar category in FrameMaker 8. This 
Marketing menu category and its choice list were added internally to the 
standard FrameMaker menu bar. The person who added it no longer works here. I 
need to locate the code that creates this additional menu bar selection.

I'm not sure where to look for this code? Can anyone help me with this?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Changing System Variable's Font Case

I want to modify the Running H/F 1 systems variable in a structured 
FrameMaker 8 template so that the typeface case is Caps / Lowercase. It is 
currently set to ALL CAPS.

What do I need to do I order change this?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Changing System Variable's Font Case

Please disregard the question below.

I have solved the issue

From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of George, Brenda (CAI)
Sent: Thursday, September 15, 2011 11:00 AM
To: framers@lists.frameusers.com
Subject: Changing System Variable's Font Case

I want to modify the Running H/F 1 systems variable in a structured 
FrameMaker 8 template so that the typeface case is Caps / Lowercase. It is 
currently set to ALL CAPS.

What do I need to do I order change this?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com

- Unless notified to the contrary by 
the sender, the recipient should consider the contents of this message 
including any attachments to be confidential. If you are not the intended 
recipient and have received this message in error, please contact Federated 
Investors immediately by forwarding this email to not...@federatedinv.com and 
then delete this message from your system. Saving, copying or disseminating an 
inadvertently received email could violate state and Federal privacy laws. All 
emails received by or sent from Federated may be provided to regulators or law 
enforcement agencies, or used for other purposes consistent with Federated's 
business interests. Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Changing System Variable's Font Case

I want to modify the "Running H/F 1" systems variable in a structured 
FrameMaker 8 template so that the typeface case is Caps / Lowercase. It is 
currently set to ALL CAPS.

What do I need to do I order change this?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

Changing System Variable's Font Case

Please disregard the question below.

I have solved the issue

From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of George, Brenda (CAI)
Sent: Thursday, September 15, 2011 11:00 AM
To: framers at lists.frameusers.com
Subject: Changing System Variable's Font Case

I want to modify the "Running H/F 1" systems variable in a structured 
FrameMaker 8 template so that the typeface case is Caps / Lowercase. It is 
currently set to ALL CAPS.

What do I need to do I order change this?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com

- Unless notified to the contrary by 
the sender, the recipient should consider the contents of this message 
including any attachments to be confidential. If you are not the intended 
recipient and have received this message in error, please contact Federated 
Investors immediately by forwarding this email to notify at federatedinv.com 
and then delete this message from your system. Saving, copying or disseminating 
an inadvertently received email could violate state and Federal privacy laws. 
All emails received by or sent from Federated may be provided to regulators or 
law enforcement agencies, or used for other purposes consistent with 
Federated's business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20110915/0f7c3281/attachment.html>

Scaling images in Structured FrameMaker

2011-08-16 Thread George, Brenda (CAI)

I need to modify a Structured FrameMaker template that displays the photos and 
professional information for a list of managers. The image for the first 
manager who appears under the subhead for each department is automatically 
scaling up 150% when the xml file is imported into the FrameMaker template. The 
remaining manager's images are importing at 100%.

I need to scale this first manager's image down on import to 100% so that this 
first manager's photo is the same size as the other managers that appear in 
that department.

The template is pulling the manager's photo (a .tif file) from a shared server. 
I checked the dimensions for the image on the server, and it is the same size 
as the other manager images.

I have checked the xsl file, the EDD, and the FrameMaker Rules file, and can't 
locate the code that I need to modify in order to fix this.

Is there a setting in the FrameMaker template that I need to modify?  How do I 
adjust the scaling for these images so that they import to the correct size?


Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Scaling images in Structured FrameMaker

2011-08-16 Thread George, Brenda (CAI)

I need to modify a Structured FrameMaker template that displays the photos and 
professional information for a list of managers. The image for the first 
manager who appears under the subhead for each department is automatically 
scaling up 150% when the xml file is imported into the FrameMaker template. The 
remaining manager's images are importing at 100%.

I need to scale this first manager's image down on import to 100% so that this 
first manager's photo is the same size as the other managers that appear in 
that department.

The template is pulling the manager's photo (a .tif file) from a shared server. 
I checked the dimensions for the image on the server, and it is the same size 
as the other manager images.

I have checked the xsl file, the EDD, and the FrameMaker Rules file, and can't 
locate the code that I need to modify in order to fix this.

Is there a setting in the FrameMaker template that I need to modify?  How do I 
adjust the scaling for these images so that they import to the correct size?


Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

Accessing a DLL file

2011-08-04 Thread George, Brenda (CAI)

I need to change the width of tables in FrameMaker files. The files are flowed 
as xml files into FrameMaker. These tablewidths have to be changed in the .dll 
file that FrameMaker looks for when files are flowed. These widths can't be 
changed in a FrameMaker template or through the edd file. The .dll file will 
override these settings.

I have never changed data in a .dll file. Is there freeware that I can download 
and use to view the code in the .dll file and then edit it?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Accessing a DLL file

2011-08-04 Thread George, Brenda (CAI)

I need to change the width of tables in FrameMaker files. The files are flowed 
as xml files into FrameMaker. These tablewidths have to be changed in the .dll 
file that FrameMaker looks for when files are flowed. These widths can't be 
changed in a FrameMaker template or through the edd file. The .dll file will 
override these settings.

I have never changed data in a .dll file. Is there freeware that I can download 
and use to view the code in the .dll file and then edit it?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL:

Java error Message when importing xml to frameMaker 8

2010-09-29 Thread George, Brenda (CAI)

I have reconstructed a workstation, and am attempting to flow an xml file into 
a FrameMaker 8 template. When I attempt to do this I get the following error 
message:

Failed reading value of registry key
Software\JavaSoft\Java Runtime Environment\Current Version

Error: could not find java.dll

Error: Could not find Java 2 Runtime Environment

The xml file is being imported by selecting it through a menu choice added 
internally through the Main Menu bar.

Java 6 Update 3 is the version being used.

I can successfully flow this file through my computer.
Any ideas what might be causing the error message and how it can be fixed?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

RE: can't view imported eps file

Thanks for info

From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Tuesday, September 21, 2010 10:14 AM
To: George, Brenda (CAI); framers@lists.frameusers.com
Subject: RE: can't view imported eps file

FrameMaker cannot render a screen view from an EPS graphic unless the EPS file 
contains a TIFF preview image, which is optional and typically not included by 
default by most apps that can create EPS files. And even when the EPS file 
*does* contain a TIFF preview, that preview image is very low-res and is only 
useful for identification and placement purposes. If you need to have a 
readable screen image for the graphic, you should convert the EPS to PDF and 
import that into FrameMaker.

-Fred Ridder

 From: bgeo...@federatedinv.com
 To: framers@lists.frameusers.com
 Date: Tue, 21 Sep 2010 09:30:11 -0400
 Subject: can't view imported eps file

 I have imported an eps file into a FrameMaker template's master page. The eps 
 file is located on a server.

 When I view the master page, the eps file is not visible. Instead a shaded 
 box displays. I can only see the eps file if I flow data into the template, 
 and then create a pdf of the FrameMaker pages.

 Is there a setting that I can change so that I can view the imported eps in 
 the frameMaker files?

 Brenda George
 Desk: (724) 720-8491
 bgeo...@federatedinv.com

 - Unless notified to the
 contrary by the sender, the recipient should consider the contents
 of this message including any attachments to be confidential. If
 you are not the intended recipient and have received this message
 in error, please contact Federated Investors immediately by
 forwarding this email to not...@federatedinv.com and then delete
 this message from your system. Saving, copying or disseminating an
 inadvertently received email could violate state and Federal
 privacy laws. All emails received by or sent from Federated may be
 provided to regulators or law enforcement agencies, or used for
 other purposes consistent with Federated's business interests.
 Thank you for your cooperation.
 ___

 You are currently subscribed to framers as docu...@hotmail.com.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit 
 http://lists.frameusers.com/mailman/options/framers/docudoc%40hotmail.com

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.
___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: can't view imported eps file

Thanks for all of your prompt responses.

I am going to try creating a preview for the file.

From: Bernard Gagne [mailto:bernyga...@rogers.com]
Sent: Tuesday, September 21, 2010 10:03 AM
To: George, Brenda (CAI); framers@lists.frameusers.com
Subject: Re: can't view imported eps file

Hi Brenda,
Was the EPS file created with a TIFF preview? Frame cannot display EPS files 
without a preview; all you get is a gray box.
I suggest opening the image in Adobe Illustrator or CorelDraw and creating a 
preview for the file.

Berny Gagne
Independent Technical Writer/Illustrator

From: George, Brenda (CAI) bgeo...@federatedinv.com
To: framers@lists.frameusers.com framers@lists.frameusers.com
Sent: Tue, September 21, 2010 9:30:11 AM
Subject: can't view imported eps file

I have imported an eps file into a FrameMaker template's master page. The eps 
file is located on a server.

When I view the master page, the eps file is not visible. Instead a shaded box 
displays. I can only see the eps file if I flow data into the template, and 
then create a pdf of the FrameMaker pages.

Is there a setting that I can change so that I can view the imported eps in the 
frameMaker files?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

can't view imported eps file

I have imported an eps file into a FrameMaker template's master page. The eps 
file is located on a server.

When I view the master page, the eps file is not visible. Instead a shaded box 
displays. I can only see the eps file if I flow data into the template, and 
then create a pdf of the FrameMaker pages.

Is there a setting that I can change so that I can view the imported eps in the 
frameMaker files?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

can't view imported eps file

Thanks for info

From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Tuesday, September 21, 2010 10:14 AM
To: George, Brenda (CAI); framers at lists.frameusers.com
Subject: RE: can't view imported eps file

FrameMaker cannot render a screen view from an EPS graphic unless the EPS file 
contains a TIFF preview image, which is optional and typically not included by 
default by most apps that can create EPS files. And even when the EPS file 
*does* contain a TIFF preview, that preview image is very low-res and is only 
useful for identification and placement purposes. If you need to have a 
readable screen image for the graphic, you should convert the EPS to PDF and 
import that into FrameMaker.

-Fred Ridder

> From: BGeorge at federatedinv.com
> To: framers at lists.frameusers.com
> Date: Tue, 21 Sep 2010 09:30:11 -0400
> Subject: can't view imported eps file
>
> I have imported an eps file into a FrameMaker template's master page. The eps 
> file is located on a server.
>
> When I view the master page, the eps file is not visible. Instead a shaded 
> box displays. I can only see the eps file if I flow data into the template, 
> and then create a pdf of the FrameMaker pages.
>
> Is there a setting that I can change so that I can view the imported eps in 
> the frameMaker files?
>
> Brenda George
> Desk: (724) 720-8491
> bgeorge at federatedinv.com
>
>
>
> - Unless notified to the
> contrary by the sender, the recipient should consider the contents
> of this message including any attachments to be confidential. If
> you are not the intended recipient and have received this message
> in error, please contact Federated Investors immediately by
> forwarding this email to notify at federatedinv.com and then delete
> this message from your system. Saving, copying or disseminating an
> inadvertently received email could violate state and Federal
> privacy laws. All emails received by or sent from Federated may be
> provided to regulators or law enforcement agencies, or used for
> other purposes consistent with Federated's business interests.
> Thank you for your cooperation.
> ___
>
>
> You are currently subscribed to framers as DocuDoc at hotmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/docudoc%40hotmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.

can't view imported eps file

Thanks for all of your prompt responses.

I am going to try creating a preview for the file.

From: Bernard Gagne [mailto:bernyga...@rogers.com]
Sent: Tuesday, September 21, 2010 10:03 AM
To: George, Brenda (CAI); framers at lists.frameusers.com
Subject: Re: can't view imported eps file

Hi Brenda,
Was the EPS file created with a TIFF preview? Frame cannot display EPS files 
without a preview; all you get is a gray box.
I suggest opening the image in Adobe Illustrator or CorelDraw and creating a 
preview for the file.

Berny Gagne
Independent Technical Writer/Illustrator

From: "George, Brenda (CAI)" <bgeo...@federatedinv.com>
To: "framers at lists.frameusers.com" 
Sent: Tue, September 21, 2010 9:30:11 AM
Subject: can't view imported eps file

I have imported an eps file into a FrameMaker template's master page. The eps 
file is located on a server.

When I view the master page, the eps file is not visible. Instead a shaded box 
displays. I can only see the eps file if I flow data into the template, and 
then create a pdf of the FrameMaker pages.

Is there a setting that I can change so that I can view the imported eps in the 
frameMaker files?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

RE: Aligning top rows of 2 column table

2010-09-15 Thread George, Brenda (CAI)

Thanks for theinfo

From: Yves Barbion [mailto:yves.barb...@gmail.com]
Sent: Wednesday, September 15, 2010 6:03 AM
To: Rick Quatro
Cc: George, Brenda (CAI); framers@lists.frameusers.com
Subject: Re: Aligning top rows of 2 column table

Hi Rick

One small but important detail: if you set the Space Below Pgf to -2pt, you 
also have to change the Default Font size of that paragraph to 2 pt. It will 
not work if the font size is larger than 2 pt. I also see that the Space Below 
Pgf value changes automatically if you change the font size afterwards. So, the 
order should be:

1. In the Paragraph Designer, set the Default Font Size to 2 pt.
2. Set the Space Below Pgf to -2 pt.
3. In the Table Designer, set Space Above to -2 pt.

You may also want to create a dedicated paragraph format for anchor 
paragraphs, for example a format called z_anchor. I also give this z_anchor 
variable (non-fixed) line spacing because I also use it for anchored frames.

Cheers

Yves

On Tue, Sep 14, 2010 at 6:39 PM, Rick Quatro 
r...@rickquatro.commailto:r...@rickquatro.com wrote:
Hi Brenda,

This question comes up from time-to-time. Here is a blog post that explains
the problem and solution. Please let me know if you have any questions or
comments. Thank you very much.

http://frameautomation.com/2010/09/14/lining-up-a-table-across-columns/

Rick Quatro
Carmen Publishing Inc.
585-659-8267
r...@frameexpert.commailto:r...@frameexpert.com

*** Frame Automation blog at http://frameautomation.com

Subject: Aligning top rows of 2 column table

I am working with structured FrameMaker templates that were created by
someone else.

When I flow xml files into these templates , there are tables that when
flowed are breaking into 2 columns. The top row of the portion of the table
that is in the second column has spacing in the first row that allows the
top rows of the table in both columns to be aligned. See the attached tif
file for an example of the table.

I am trying to create a table that flows like this for another template. I
can't figure out how to set the table formatting so that the table flows
into 2 columns, and the top rows are aligned?

What do I need to do to accomplish this.

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com
___

You are currently subscribed to framers as 
yves.barb...@gmail.commailto:yves.barb...@gmail.com.

Send list messages to 
framers@lists.frameusers.commailto:framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.commailto:framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail.com

Send administrative questions to 
listad...@frameusers.commailto:listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

--
Yves Barbion
www.scripto.nuhttp://www.scripto.nu

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Aligning top rows of 2 column table

2010-09-15 Thread George, Brenda (CAI)

Thanks for theinfo

From: Yves Barbion [mailto:yves.barb...@gmail.com]
Sent: Wednesday, September 15, 2010 6:03 AM
To: Rick Quatro
Cc: George, Brenda (CAI); framers at lists.frameusers.com
Subject: Re: Aligning top rows of 2 column table

Hi Rick

One small but important detail: if you set the Space Below Pgf to -2pt, you 
also have to change the Default Font size of that paragraph to 2 pt. It will 
not work if the font size is larger than 2 pt. I also see that the Space Below 
Pgf value changes automatically if you change the font size afterwards. So, the 
order should be:

1. In the Paragraph Designer, set the Default Font Size to 2 pt.
2. Set the Space Below Pgf to -2 pt.
3. In the Table Designer, set Space Above to -2 pt.

You may also want to create a dedicated paragraph format for "anchor 
paragraphs", for example a format called "z_anchor". I also give this z_anchor 
"variable" (non-fixed) line spacing because I also use it for anchored frames.

Cheers

Yves

On Tue, Sep 14, 2010 at 6:39 PM, Rick Quatro mailto:rick at rickquatro.com>> wrote:
Hi Brenda,

This question comes up from time-to-time. Here is a blog post that explains
the problem and solution. Please let me know if you have any questions or
comments. Thank you very much.

http://frameautomation.com/2010/09/14/lining-up-a-table-across-columns/

Rick Quatro
Carmen Publishing Inc.
585-659-8267
rick at frameexpert.com<mailto:rick at frameexpert.com>

*** Frame Automation blog at http://frameautomation.com

Subject: Aligning top rows of 2 column table

I am working with structured FrameMaker templates that were created by
someone else.

When I flow xml files into these templates , there are tables that when
flowed are breaking into 2 columns. The top row of the portion of the table
that is in the second column has spacing in the first row that allows the
top rows of the table in both columns to be aligned. See the attached tif
file for an example of the table.

I am trying to create a table that flows like this for another template. I
can't figure out how to set the table formatting so that the table flows
into 2 columns, and the top rows are aligned?

What do I need to do to accomplish this.

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>
___

You are currently subscribed to framers as yves.barbion at 
gmail.com<mailto:yves.barbion at gmail.com>.

Send list messages to framers at lists.frameusers.com<mailto:framers at 
lists.frameusers.com>.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at 
lists.frameusers.com>
or visit 
http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail.com

Send administrative questions to listadmin at frameusers.com<mailto:listadmin 
at frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.

--
Yves Barbion
www.scripto.nu<http://www.scripto.nu>

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Aligning top rows of 2 column table

2010-09-14 Thread George, Brenda (CAI)

I am working with structured FrameMaker templates that were created by someone 
else.

When I flow xml files into these templates , there are tables that when flowed 
are breaking into 2 columns. The top row of the portion of the table that is in 
the second column has spacing in the first row that allows the top rows of the 
table in both columns to be aligned. See the attached tif file for an example 
of the table.

I am trying to create a table that flows like this for another template. I 
can't figure out how to set the table formatting so that the table flows into 2 
columns, and the top rows are aligned?

What do I need to do to accomplish this.

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Aligning top rows of 2 column table

2010-09-14 Thread George, Brenda (CAI)

I am working with structured FrameMaker templates that were created by someone 
else.

When I flow xml files into these templates , there are tables that when flowed 
are breaking into 2 columns. The top row of the portion of the table that is in 
the second column has spacing in the first row that allows the top rows of the 
table in both columns to be aligned. See the attached tif file for an example 
of the table.

I am trying to create a table that flows like this for another template. I 
can't figure out how to set the table formatting so that the table flows into 2 
columns, and the top rows are aligned?

What do I need to do to accomplish this.

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Eliminating NoName Element in flowed FrameMaker files

2010-05-18 Thread George, Brenda (CAI)

When I validate Structured FrameMaker files that I flow, I am noticing that I 
am getting the following validation error:
Element: NoName
Element is undefined.

What can I do to stop FrameMaker from embedding this top-level NoName element 
into the FrameMaker files that I flow?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Eliminating "NoName" Element in flowed FrameMaker files

2010-05-18 Thread George, Brenda (CAI)

When I validate Structured FrameMaker files that I flow, I am noticing that I 
am getting the following validation error:
Element: NoName
Element is undefined.

What can I do to stop FrameMaker from embedding this top-level "NoName" element 
into the FrameMaker files that I flow?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Not generating a Structured Master Page Map

2010-05-14 Thread George, Brenda (CAI)

I have created a Structured FrameMaker template. When I attempt to generate a  
Structured Master Page Map by selecting Format  Page Layout  Apply Master 
Pages, it generated an Unstructured Master Page Map. Why can't I generate a 
structured page map?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Not generating a Structured Master Page Map

2010-05-14 Thread George, Brenda (CAI)

I have created a Structured FrameMaker template. When I attempt to generate a  
Structured Master Page Map by selecting Format > Page Layout > Apply Master 
Pages, it generated an Unstructured Master Page Map. Why can't I generate a 
structured page map?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Text not flowing entire width of text box

I am working on a FM template that has master pages with single column text 
boxes that are 45 picas wide.

I am finding that my tagged text is not flowing to the entire length of the 
text box. It is flowing in at a maximum line width of 42 picas, then bumping to 
the next line. I do not have indents set in this tag. When I attempt to 
manually type additional text in the text box, it is bumping to the next line 
when it reaches 42 picas in length.

What setting do I need to adjust so that the text will flow to the 45 pica 
width of the text box?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Text not flowing entire width of text box

Thanks. This was the problem. Thanks to all of you for your help

From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Wednesday, May 12, 2010 11:47 AM
To: George, Brenda (CAI); framers@lists.frameusers.com
Subject: RE: Text not flowing entire width of text box

One thing to check is the setting of the DisplayUsingPrinterMetrics option in 
your maker.ini file. If that option is set to Off, FrameMaker will optimize the 
displayed text for readability even if this results in slightly incorrect line 
lengths. If the option is set to On, the displayed line lengths will be 
correct, but some of the individual glyphs may be slightly distorted to make 
the spacing come out right.

And remember that you have two maker.ini files that both come into play. The 
defualt settings are in the maker.ini file that is located in the application 
installation file (typically C:\ProgramFiles\Adobe\FrameMakerX, where X is the 
major version number). A second maker.ini that contains your personalized 
preferences, recent file list, etc. is located in
C:\Documents and Settings\your_username\Application Data\Adobe\FrameMaker\X.0
This personal maker.ini is much smaller than the default one, and all the items 
in it are either supplementary (i.e. not in the default maker.ini) or are 
overrides of the default maker.ini settings.

-Fred Ridder

 From: bgeo...@federatedinv.com
 To: framers@lists.frameusers.com
 Date: Wed, 12 May 2010 10:19:11 -0400
 Subject: Text not flowing entire width of text box

 I am working on a FM template that has master pages with single column text 
 boxes that are 45 picas wide.

 I am finding that my tagged text is not flowing to the entire length of the 
 text box. It is flowing in at a maximum line width of 42 picas, then bumping 
 to the next line. I do not have indents set in this tag. When I attempt to 
 manually type additional text in the text box, it is bumping to the next line 
 when it reaches 42 picas in length.

 What setting do I need to adjust so that the text will flow to the 45 pica 
 width of the text box?

 Brenda George
 Desk: (724) 720-8491
 bgeo...@federatedinv.com

Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. 
Learn 
more.http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___

You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Text not flowing entire width of text box

I am working on a FM template that has master pages with single column text 
boxes that are 45 picas wide.

I am finding that my tagged text is not flowing to the entire length of the 
text box. It is flowing in at a maximum line width of 42 picas, then bumping to 
the next line. I do not have indents set in this tag. When I attempt to 
manually type additional text in the text box, it is bumping to the next line 
when it reaches 42 picas in length.

What setting do I need to adjust so that the text will flow to the 45 pica 
width of the text box?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Text not flowing entire width of text box

Thanks. This was the problem. Thanks to all of you for your help

From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Wednesday, May 12, 2010 11:47 AM
To: George, Brenda (CAI); framers at lists.frameusers.com
Subject: RE: Text not flowing entire width of text box

One thing to check is the setting of the DisplayUsingPrinterMetrics option in 
your maker.ini file. If that option is set to Off, FrameMaker will optimize the 
displayed text for readability even if this results in slightly incorrect line 
lengths. If the option is set to On, the displayed line lengths will be 
correct, but some of the individual glyphs may be slightly distorted to make 
the spacing come out right.

And remember that you have two maker.ini files that both come into play. The 
defualt settings are in the maker.ini file that is located in the application 
installation file (typically C:\ProgramFiles\Adobe\FrameMakerX, where X is the 
major version number). A second maker.ini that contains your personalized 
preferences, recent file list, etc. is located in
C:\Documents and Settings\\Application Data\Adobe\FrameMaker\X.0
This personal maker.ini is much smaller than the default one, and all the items 
in it are either supplementary (i.e. not in the default maker.ini) or are 
overrides of the default maker.ini settings.

-Fred Ridder

> From: BGeorge at federatedinv.com
> To: framers at lists.frameusers.com
> Date: Wed, 12 May 2010 10:19:11 -0400
> Subject: Text not flowing entire width of text box
>
> I am working on a FM template that has master pages with single column text 
> boxes that are 45 picas wide.
>
> I am finding that my tagged text is not flowing to the entire length of the 
> text box. It is flowing in at a maximum line width of 42 picas, then bumping 
> to the next line. I do not have indents set in this tag. When I attempt to 
> manually type additional text in the text box, it is bumping to the next line 
> when it reaches 42 picas in length.
>
> What setting do I need to adjust so that the text will flow to the 45 pica 
> width of the text box?
>
> Brenda George
> Desk: (724) 720-8491
> bgeorge at federatedinv.com

Hotmail has tools for the New Busy. Search, chat and e-mail from your inbox. 
Learn 
more.<http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1>

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

FrameMaker Table Width Issue Solved

2010-04-23 Thread George, Brenda (CAI)

A couple of months ago I sent an email concerning an issue that I was having

importing into Structured FrameMaker an XML file that contains tables. When I 
flowed xml into the structured FrameMaker template, the flowed tables were not 
sizing correctly and needed to be manually resized. The tables were all 
defaulting to a specific width.



As it turns out, the problem was in a dll file that had default settings for 
table widths. When these table widths were adjusted to accommodate the new 
widths, the tables flowed to the correct widths.



Thanks to those of you who tried to help me trouble-shoot this issue.


Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker Table Width Issue Solved

2010-04-23 Thread George, Brenda (CAI)

A couple of months ago I sent an email concerning an issue that I was having

importing into Structured FrameMaker an XML file that contains tables. When I 
flowed xml into the structured FrameMaker template, the flowed tables were not 
sizing correctly and needed to be manually resized. The tables were all 
defaulting to a specific width.



As it turns out, the problem was in a dll file that had default settings for 
table widths. When these table widths were adjusted to accommodate the new 
widths, the tables flowed to the correct widths.



Thanks to those of you who tried to help me trouble-shoot this issue.


Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Page Flow Problems

2010-04-22 Thread George, Brenda (CAI)

I am flowing xml files into Structured FrameMaker. I am trying to get the final 
element to flow into the back cover master page. I have mapped the element that 
needs to be flowed to the back cover page using the StructMasterPageMaps. The 
element is not flowing to that page. Instead it is flowing to the top of the 
previous master page, then a new back cover page is being generated after that. 
How do I get the element to flow into the back cover page?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Page Flow Problems

2010-04-22 Thread George, Brenda (CAI)

I am flowing xml files into Structured FrameMaker. I am trying to get the final 
element to flow into the back cover master page. I have mapped the element that 
needs to be flowed to the back cover page using the StructMasterPageMaps. The 
element is not flowing to that page. Instead it is flowing to the top of the 
previous master page, then a new back cover page is being generated after that. 
How do I get the element to flow into the back cover page?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Error message when importing xml into Structured FrameMaker template

2010-04-19 Thread George, Brenda (CAI)

I am getting the following error message when attempting to import xml into 
Structured FrameMaker template:
The master page application caused the determining E:researchlist tag to move 
off the page. The default master page was applied as a result.
Book Error report.

It will not allow the text enclosed in the researchlist tags to flow to the 
appropriate master page. How can I fix tis?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Error message when importing xml into Structured FrameMaker template

2010-04-19 Thread George, Brenda (CAI)

I am getting the following error message when attempting to import xml into 
Structured FrameMaker template:
The master page application caused the determining "E:researchlist" tag to move 
off the page. The default master page was applied as a result.
Book Error report.

It will not allow the text enclosed in the  tags to flow to the 
appropriate master page. How can I fix tis?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Master Page Flow Problems

2010-04-12 Thread George, Brenda (CAI)

I am trying to flow 4 xml documents into structured FrameMaker template that is 
4 pages. The last page has 3 different master page versions. I have set the 
StructMasterPageMaps up to direct the page flow for the final page to the 
correct back page master page, depending on the value for the version 
attribute. The data is not flowing correctly. The master page that precedes 
this back master page is 2 column. If the data for this page only flows into 
the first column, and the second column is empty, the back page data flows into 
the correct version of the back master page. If the second column has data in 
it, the back page flows onto a new page but applies the master page used by the 
preceding data. It doesn't apply the correct back master page version.

Does anyone know how I can correct this?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Master Page Flow Problems

2010-04-12 Thread George, Brenda (CAI)

I am trying to flow 4 xml documents into structured FrameMaker template that is 
4 pages. The last page has 3 different master page versions. I have set the 
StructMasterPageMaps up to direct the page flow for the final page to the 
correct back page master page, depending on the value for the version 
attribute. The data is not flowing correctly. The master page that precedes 
this back master page is 2 column. If the data for this page only flows into 
the first column, and the second column is empty, the back page data flows into 
the correct version of the back master page. If the second column has data in 
it, the back page flows onto a new page but applies the master page used by the 
preceding data. It doesn't apply the correct back master page version.

Does anyone know how I can correct this?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Applying Table Straddle Using XML

2010-03-18 Thread George, Brenda (CAI)

I am working in structured FrameMaker. I am importing XML files into FrameMaker 
templates using an automated process that was created internally.

I am trying to import a table into FrameMaker that has a 3-column straddle in 
the first row and in the last row. When I import the xml file, the straddle is 
not being applied the table data. All of the table data is being imported into 
3 columns.

How do I mark up the xml so that the straddle will be applied when imported 
into FrameMaker?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Applying Table Straddle Using XML

2010-03-18 Thread George, Brenda (CAI)

I am working in structured FrameMaker. I am importing XML files into FrameMaker 
templates using an automated process that was created internally.

I am trying to import a table into FrameMaker that has a 3-column straddle in 
the first row and in the last row. When I import the xml file, the straddle is 
not being applied the table data. All of the table data is being imported into 
3 columns.

How do I mark up the xml so that the straddle will be applied when imported 
into FrameMaker?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Problems Flowing XML in FrameMaker

2010-03-15 Thread George, Brenda (CAI)

I am working in structured FrameMaker. When I attempt to import an xml file 
into my FrameMaker template, I am getting the following message:

Import Emph element definition not found

In the past I have been able to successfully import xml files into this 
template. Now I am getting this error message.

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Problems Flowing XML in FrameMaker

2010-03-15 Thread George, Brenda (CAI)

I am working in structured FrameMaker. When I attempt to import an xml file 
into my FrameMaker template, I am getting the following message:

Import "Emph" element definition not found

In the past I have been able to successfully import xml files into this 
template. Now I am getting this error message.

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Table Cell Sizes

I am having problems with table cells enlarging table enlarging or contracting 
based on the amount of data that is flowed into the table cells.



I need for the cells to adhere to the pre-set size set in the table.



Is there a setting in FrameMaker that modifies table behavior, allowing table 
size to adjust based on volume of data? If so, how do I change that setting?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Table Cell Sizes

Yes. That is what I was referring to.

-Original Message-
From: Rick Quatro [mailto:r...@rickquatro.com] 
Sent: Wednesday, February 17, 2010 10:46 AM
To: 'Combs, Richard'; George, Brenda (CAI); framers@lists.frameusers.com
Subject: RE: Table Cell Sizes

I think Brenda is referring to the table column widths.

Rick

George, Brenda wrote: 

 I am having problems with table cells enlarging table enlarging or
 contracting based on the amount of data that is flowed into the table
 cells.

 I need for the cells to adhere to the pre-set size set in the table.

 Is there a setting in FrameMaker that modifies table behavior,
allowing
 table size to adjust based on volume of data? If so, how do I change
that
 setting?

Um, table rows resizing to fit their cells' contents is generally not
considered a problem. You do realize that if the row height doesn't
increase to accommodate more text, the text will be cut off, right? It's
not like FM will automagically shrink it to fit, or something.

That said, the Row Format dialog (Table  Row Format) lets you specify
minimum and maximum row heights.  

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-777-0436
--

- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___

You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Table Cell Sizes

Yes, it did.
Thanks for the help.

-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com] 
Sent: Wednesday, February 17, 2010 10:51 AM
To: George, Brenda (CAI); Rick Quatro; framers@lists.frameusers.com
Subject: RE: Table Cell Sizes

Sorry, I didn't understand the context until I saw Leigh White's reply
on the Flowing Tables into Structured FrameMaker thread. I believe
that answer address this query as well. 

 -Original Message-
 From: George, Brenda (CAI) [mailto:bgeo...@federatedinv.com]
 Sent: Wednesday, February 17, 2010 8:47 AM
 To: Rick Quatro; Combs, Richard; framers@lists.frameusers.com
 Subject: RE: Table Cell Sizes

 Yes. That is what I was referring to.

 -Original Message-
 From: Rick Quatro [mailto:r...@rickquatro.com]
 Sent: Wednesday, February 17, 2010 10:46 AM
 To: 'Combs, Richard'; George, Brenda (CAI);
framers@lists.frameusers.com
 Subject: RE: Table Cell Sizes

 I think Brenda is referring to the table column widths.

 Rick

 George, Brenda wrote:

  I am having problems with table cells enlarging table enlarging or
  contracting based on the amount of data that is flowed into the
table
  cells.

  I need for the cells to adhere to the pre-set size set in the table.

  Is there a setting in FrameMaker that modifies table behavior,
 allowing
  table size to adjust based on volume of data? If so, how do I change
 that
  setting?

 Um, table rows resizing to fit their cells' contents is generally not
 considered a problem. You do realize that if the row height doesn't
 increase to accommodate more text, the text will be cut off, right?
It's
 not like FM will automagically shrink it to fit, or something.

 That said, the Row Format dialog (Table  Row Format) lets you specify
 minimum and maximum row heights.

 Richard G. Combs
 Senior Technical Writer
 Polycom, Inc.
 richardDOTcombs AT polycomDOTcom
 303-223-5111
 --
 rgcombs AT gmailDOTcom
 303-777-0436
 --

 - Unless notified to the
 contrary by the sender, the recipient should consider the contents
 of this message including any attachments to be confidential. If
 you are not the intended recipient and have received this message
 in error, please contact Federated Investors immediately by
 forwarding this email to not...@federatedinv.com and then delete
 this message from your system. Saving, copying or disseminating an
 inadvertently received email could violate state and Federal
 privacy laws. All emails received by or sent from Federated may be
 provided to regulators or law enforcement agencies, or used for
 other purposes consistent with Federated's business interests.
 Thank you for your cooperation.
- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
___

You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Table Cell Sizes

Yes. That is what I was referring to.

-Original Message-
From: Rick Quatro [mailto:r...@rickquatro.com] 
Sent: Wednesday, February 17, 2010 10:46 AM
To: 'Combs, Richard'; George, Brenda (CAI); framers at lists.frameusers.com
Subject: RE: Table Cell Sizes

I think Brenda is referring to the table column widths.

Rick

George, Brenda wrote: 

> I am having problems with table cells enlarging table enlarging or
> contracting based on the amount of data that is flowed into the table
> cells.
> 
> 
> 
> I need for the cells to adhere to the pre-set size set in the table.
> 
> 
> 
> Is there a setting in FrameMaker that modifies table behavior,
allowing
> table size to adjust based on volume of data? If so, how do I change
that
> setting?

Um, table rows resizing to fit their cells' contents is generally not
considered a problem. You do realize that if the row height doesn't
increase to accommodate more text, the text will be cut off, right? It's
not like FM will automagically shrink it to fit, or something.

That said, the Row Format dialog (Table > Row Format) lets you specify
minimum and maximum row heights.  

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-777-0436
--


- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.

Table Cell Sizes