Re-sending selected e-mail messages
I need a way to automatically re-sent stored e-mail messages according to some criteria and like to ask for advice or suggestions for an already existing solution before I start reinventing the wheel. :-) The messages in question are stored in MH format. This is a tree where a mailbox equals a directory, and the individual files in that directory equal the messages. They are numbered 1, 2, 3, 4, ..., and so on. Each message is in Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable or Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit or maybe even Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit text format. Some of them might contain an attachment, which is included in the file with something like --Multipart=... Content-Type: ...; name=... Content-Disposition: attachment; filename=... Content-Transfer-Encoding: base64 --Multipart=...--- Some messages are fully multipart. So when iterating on ~/Mail/sent/1,2,3,4,5,... I get all the messages. Each third line, To:, is the criteria to look at. If it matches a given recipient, the mail should be sent again. This can easily be done by the system's mailer which is properly configured (and uses ISP's MX), so | mail -s maybe new subject is possible. The message should already be properly pre-composed. What is the easiest way to do this without reinventing the wheel, or should I? :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Re-sending selected e-mail messages
On Wed, Feb 13, 2013 at 3:49 PM, Polytropon free...@edvax.de wrote: I need a way to automatically re-sent stored e-mail messages according to some criteria and like to ask for advice or suggestions for an already existing solution before I start reinventing the wheel. :-) The messages in question are stored in MH format. This is a tree where a mailbox equals a directory, and the individual files in that directory equal the messages. They are numbered 1, 2, 3, 4, ..., and so on. Each message is in Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable or Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit or maybe even Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit text format. Some of them might contain an attachment, which is included in the file with something like --Multipart=... Content-Type: ...; name=... Content-Disposition: attachment; filename=... Content-Transfer-Encoding: base64 --Multipart=...--- Some messages are fully multipart. So when iterating on ~/Mail/sent/1,2,3,4,5,... I get all the messages. Each third line, To:, is the criteria to look at. If it matches a given recipient, the mail should be sent again. This can easily be done by the system's mailer which is properly configured (and uses ISP's MX), so | mail -s maybe new subject is possible. The message should already be properly pre-composed. What is the easiest way to do this without reinventing the wheel, or should I? :-) Perhaps mini_sendmail? Seems fairly capable, and scriptable. Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Re-sending selected e-mail messages
Kurt Buff kurt.b...@gmail.com writes: On Wed, Feb 13, 2013 at 3:49 PM, Polytropon free...@edvax.de wrote: I need a way to automatically re-sent stored e-mail messages according to some criteria and like to ask for advice or suggestions for an already existing solution before I start reinventing the wheel. :-) [...] Perhaps mini_sendmail? Seems fairly capable, and scriptable. Or maybe procmail's tools (I'm thinking in particular of procmail, although there are some other bits and bobs that might relate also) would serve the particular selection criteria? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Re-sending selected e-mail messages
On Feb 13, 2013 3:49 PM, Polytropon free...@edvax.de wrote: I need a way to automatically re-sent stored e-mail messages according to some criteria and like to ask for advice or suggestions for an already existing solution before I start reinventing the wheel. :-) The messages in question are stored in MH format. This is a tree where a mailbox equals a directory, and the individual files in that directory equal the messages. They are numbered 1, 2, 3, 4, ..., and so on. Each message is in Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable or Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit or maybe even Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit text format. Some of them might contain an attachment, which is included in the file with something like --Multipart=... Content-Type: ...; name=... Content-Disposition: attachment; filename=... Content-Transfer-Encoding: base64 --Multipart=...--- Some messages are fully multipart. So when iterating on ~/Mail/sent/1,2,3,4,5,... I get all the messages. Each third line, To:, is the criteria to look at. If it matches a given recipient, the mail should be sent again. This can easily be done by the system's mailer which is properly configured (and uses ISP's MX), so | mail -s maybe new subject is possible. The message should already be properly pre-composed. What is the easiest way to do this without reinventing the wheel, or should I? :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I'm working on an email related project, you might hack it to work for you. https://github.com/waitman/elmboxo check out pmess.c it can do a single message. (the easy way to feed pmess a single message is actually to feed the single message to elmboxo as it is coded) anyway its built to stuff them in a mongodb db, but I.m working on a free nosql solution that works for my project. you can just chuck all those bits. an idea. Waitman Gobble San Jose California ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Re-sending selected e-mail messages
Date: Thu, 14 Feb 2013 00:49:13 +0100 From: Polytropon free...@edvax.de To: FreeBSD Questions freebsd-questions@freebsd.org Subject: Re-sending selected e-mail messages I need a way to automatically re-sent stored e-mail messages according to some criteria and like to ask for advice or suggestions for an already existing solution before I start reinventing the wheel. :-) The messages in question are stored in MH format. What is the easiest way to do this without reinventing the wheel, or should I? :-) procmail is your friend. cat ~/sent* |procmail -f resendrc where resendrc is: emailaddr=f...@bar.baz :0 *^To: *${emailaddr} *^Subject:\/.*$ | formail -I Subject: {resend} ${MATCH} | $SENDMAIL -oi -t Delete the 'formail' if you want the Subject: unmolested. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
How to achieve E-Mail Notification on root login?
Hello, given there is a FreeBSD system with users in the wheel group, what is the best practise to send out a notification via E-Mail if one of them becomes root via su? In an ideal case the E-Mail would contain the user name and the time. I thought about using sudo but this is not in the base system which I would prefer. Kind regards, Matthias -- Matthias Petermann matth...@d2ux.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
On Tue, 12 Feb 2013 13:24:52 +0100, Matthias Petermann wrote: Hello, given there is a FreeBSD system with users in the wheel group, what is the best practise to send out a notification via E-Mail if one of them becomes root via su? In an ideal case the E-Mail would contain the user name and the time. I thought about using sudo but this is not in the base system which I would prefer. I'm not sure if there already is a solution (provided in the base system) that offers this functionality, but the fact of a user having used su to su root is logged by the system. The line is appended to /var/log/messages: Feb 12 14:40:57 r56 su: poly to root on /dev/pts/2 The information you want is in there, and you could either use the whole line, or apply some sed, awk or even perl to form a message with less information (only date and user). A scripted solution could monitor /var/log/messages for changes and use the system's builtin mailer to deliver the message. Tools like tail -f, grep and | mail could be involved. It should be quite trivial to implement this and add a custom rc.d-style script (or even few lines in ye olde /etc/rc.local). -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
Polytropon writes: given there is a FreeBSD system with users in the wheel group, what is the best practise to send out a notification via E-Mail if one of them becomes root via su? In an ideal case the E-Mail would contain the user name and the time. I'm not sure if there already is a solution (provided in the base system) that offers this functionality, but the fact of a user having used su to su root is logged by the system. The line is appended to /var/log/messages: Feb 12 14:40:57 r56 su: poly to root on /dev/pts/2 The information you want is in there, and you could either use the whole line, or apply some sed, awk or even perl to form a message with less information (only date and user). A scripted solution could monitor /var/log/messages for changes and use the system's builtin mailer to deliver the message. Tools like tail -f, grep and | mail could be involved. It should be quite trivial to implement this and add a custom rc.d-style script (or even few lines in ye olde /etc/rc.local). Take a look at the -p option of split. The bigger question is how quickly do you need to know - instantly? once an hour? once a day? Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
Robert Huff roberth...@rcn.com writes: Polytropon writes: given there is a FreeBSD system with users in the wheel group, what is the best practise to send out a notification via E-Mail if one of them becomes root via su? In an ideal case the E-Mail would contain the user name and the time. I'm not sure if there already is a solution (provided in the base system) that offers this functionality, but the fact of a user having used su to su root is logged by the system. The line is appended to /var/log/messages: Feb 12 14:40:57 r56 su: poly to root on /dev/pts/2 The information you want is in there, and you could either use the whole line, or apply some sed, awk or even perl to form a message with less information (only date and user). A scripted solution could monitor /var/log/messages for changes and use the system's builtin mailer to deliver the message. Tools like tail -f, grep and | mail could be involved. It should be quite trivial to implement this and add a custom rc.d-style script (or even few lines in ye olde /etc/rc.local). Take a look at the -p option of split. The bigger question is how quickly do you need to know - instantly? once an hour? once a day? Robert Huff I don't think anything other than instantly makes sense. If it would be a batch thing sent once an hour/day/whatever then an attacker could simply prevent the mail being sent, and/or remove her entry from the log. Furthermore, one should realize that any setup would only be guaranteed to report the first breach/login. In other words: after the first notice that someone logged in as root you can no longer trust that you will get further notices (assuming that the emails safely arrive once they have actually left the system in the first place). Unless you can somehow verify that your notification system/setup was untouched by the person who logged in (e.g. since you were the one that actually logged in as root). Regards, -- - Frank ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
Hi, Allow sudo bash only. Modify .bashrc to mail last entry from the log http://tldp.org/LDP/abs/html/sample-bashrc.html So you will get alert instantly :-) Peter On 12/02/2013 16:31, Robert Huff wrote: Polytropon writes: given there is a FreeBSD system with users in the wheel group, what is the best practise to send out a notification via E-Mail if one of them becomes root via su? In an ideal case the E-Mail would contain the user name and the time. I'm not sure if there already is a solution (provided in the base system) that offers this functionality, but the fact of a user having used su to su root is logged by the system. The line is appended to /var/log/messages: Feb 12 14:40:57 r56 su: poly to root on /dev/pts/2 The information you want is in there, and you could either use the whole line, or apply some sed, awk or even perl to form a message with less information (only date and user). A scripted solution could monitor /var/log/messages for changes and use the system's builtin mailer to deliver the message. Tools like tail -f, grep and | mail could be involved. It should be quite trivial to implement this and add a custom rc.d-style script (or even few lines in ye olde /etc/rc.local). Take a look at the -p option of split. The bigger question is how quickly do you need to know - instantly? once an hour? once a day? Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
Robert Huff roberth...@rcn.com writes: R The bigger question is how quickly do you need to know - instantly? R once an hour? once a day? On 12 Feb 2013 15:39:56 +0100, Frank Staals fr...@fstaals.net said: F I don't think anything other than instantly makes sense. If it would be F a batch thing sent once an hour/day/whatever then an attacker could F simply prevent the mail being sent, and/or remove her entry from the F log. Furthermore, one should realize that any setup would only be F guaranteed to report the first breach/login. Yup. I can see two ways around this, and the first one is ugly. 1. Rename su and make it executable only by root, so you can't bypass the part that handles the email alert: # mv /usr/bin/su /usr/bin/sulocal # chmod 700 /usr/bin/sulocal 2. Create a script in a directory accessible only by root: # cat /root/bin/emailalert #!/bin/sh echo root login by `/usr/bin/id -un` | exec /path/to/sendmail -t exit 1 3. Replace /usr/bin/su with a small setuid C program to call the script and then run the real su, something like: main(int argc, char **argv, char **envp) { system(/root/bin/emailalert); execve(/usr/bin/sulocal, argv, envp); exit(1); } The second (better) way is to have your logs immediately forwarded to another host specifically set up for intrusion detection, install a log-monitoring system there, and send the message from there. This way, the original logs are more likely to be intact when you investigate. -- Karl Vogel I don't speak for the USAF or my company Some guy just yelled at me for texting and driving. I told him to get off my hood and mind his own business. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: How to achieve E-Mail Notification on root login?
On Tue, 12 Feb 2013, Zyumbilev, Peter wrote: Allow sudo bash only. The OP didn't want to use sudo because it's not in the base system. I would guess he also doesn't want to use bash, since it too is not in the base system. [ snip ] -- Chris Hill ch...@monochrome.org ** [ Busy Expunging / ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
IP - e-mail
Hi everybody, Let say my computer is connected to the internet with a cable modem and has a dynamic IP address via DHCP. This address is refreshed after every random days. I want to know the new address even when I'm not home. Like send an e-mail with the new IP, I already know how to do this, but how can I track the event when my computer receives the new IP? Any ideas or same issues? Thx! Laszlo ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IP - e-mail
El día Wednesday, June 06, 2012 a las 02:06:48AM -0700, Dánielisz László escribió: Hi everybody, Let say my computer is connected to the internet with a cable modem and has a dynamic IP address via DHCP. This address is refreshed after every random days. I want to know the new address even when I'm not home. Like send an e-mail with the new IP, I already know how to do this, but how can I track the event when my computer receives the new IP? Any ideas or same issues? Hi, Run this in a cronjob: lynx -dump myip.nl | fgrep 'WAN IP' strore the result in a file and when it changes, trigger a mail; HIH matthias -- Matthias Apitz e g...@unixarea.de - w http://www.unixarea.de/ UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IP - e-mail
Matthias Apitz writes: Let say my computer is connected to the internet with a cable modem and has a dynamic IP address via DHCP. This address is refreshed after every random days. I want to know the new address even when I'm not home. Like send an e-mail with the new IP, I already know how to do this, but how can I track the event when my computer receives the new IP? Run this in a cronjob: lynx -dump myip.nl | fgrep 'WAN IP' strore the result in a file and when it changes, trigger a mail; Or, using only tools in the base system: ifconfig | head | grep inet | awk '{print $2}' Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IP - e-mail
El día Wednesday, June 06, 2012 a las 09:17:47AM -0400, Robert Huff escribió: Run this in a cronjob: lynx -dump myip.nl | fgrep 'WAN IP' strore the result in a file and when it changes, trigger a mail; Or, using only tools in the base system: ifconfig | head | grep inet | awk '{print $2}' This will not work if your host has some private addr which is NAT'ed by a router; the real test is ask some remote side how I do apear to you? ofc you could do this as well by SSH'ing to some side and asking with netstat(1) there (which may be shows another NAT'ed addr too :-)) Trust me, the above lynx is the nearly only robust version. matthias -- Matthias Apitz e g...@unixarea.de - w http://www.unixarea.de/ UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IP - e-mail
m From owner-freebsd-questi...@freebsd.org Wed Jun 6 07:37:57 2012 Date: Wed, 6 Jun 2012 02:06:48 -0700 (PDT) From: =?iso-8859-1?Q?D=E1nielisz_L=E1szl=F3?= laszlo_daniel...@yahoo.com To: freebsd-questions@freebsd.org freebsd-questions@freebsd.org Subject: IP - e-mail Hi everybody, Let say my computer is connected to the internet with a cable modem and h as a dynamic IP address via DHCP. This address is refreshed after every r andom days. I want to know the new address even when I'm not home. Like send an e-mai l with the new IP, I already know how to do this, but how can I track the event when my computer receives the new IP? Any ideas or same issues? Schedule a 'cron' job to run as frequently as you like. Have it: a) do an 'ifconfig -a', or maybe just check the 'interface of interest'. b) 'diff' that output against a 'reference' copy from the previous run c) send an email if diff reports differences d) save the ifconfig output for referene in the next run ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
RE: IP - e-mail
-Original Message- From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd- questi...@freebsd.org] On Behalf Of Robert Huff Sent: Wednesday, June 06, 2012 9:18 AM To: Matthias Apitz Cc: freebsd-questions@freebsd.org Subject: Re: IP - e-mail Matthias Apitz writes: Let say my computer is connected to the internet with a cable modem and has a dynamic IP address via DHCP. This address is refreshed after every random days. I want to know the new address even when I'm not home. Like send an e-mail with the new IP, I already know how to do this, but how can I track the event when my computer receives the new IP? If you are using it so you know what IP to hit from outside your network, I would also recommend taking a look at a service like DynDNS as you would have a DNS name that would auto correct for new IP. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: IP - e-mail
On Wed, 06 Jun 2012 09:11:02 -0500, Robert Bonomi bon...@mail.r-bonomi.com wrote: Matthias, your lynx-based 'solution' does *NOT* solve the OP's question. Incorrect; it does solve his problem. He wants to know -when- his DHCP assigned address changes. Consider what happens if both the expired address and the new address are behind the _same_ NAT translation. The internal addrress changes, but the external one does not. Please people, read carefully: His ISP is handing out his public IP via DHCP. This is normal for consumer internet connections. He doesn't care about his internal RFC 1918 IP which is handed out by his router's DHCP server; that's an easy problem to solve. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
USA Bulk Email Marketing Company's E-mail Service provides a quick simple way for you to send bulk e-mail.
*Click Here* http://www.massmailservers.com/ to visit our main website [image: Help using Google Talk] gtalk:chat?jid=mmshelpl...@gmail.com[image: Help using Yahoo] ymsgr:sendIM?massmailserv...@yahoo.com[image: Help using Skype] skype:massmailservers?chat *Bulk Email SMTP SERVERS* Thinking about using email to market to new customer? There is no doubt that email marketing/bulk email is a reliable cost effective way to bring increased business to your company. Finding new customers and keep in contact with existing customers, email marketing is the only affordable solution. When other email marketing providers say “no” we say “yes!” When other say “call for a quote” we say look at our affordable plans. MMS email servers have quickly become the number 1 choice for all your email marketing needs. After years of Email Marketing experience there is only a handful of people that know how to setup and prepare a server to meet the requirements of most major ISPs email providers. *Are Having trouble getting your emails delivered?* We understand and know what requirements are needed. From *SPF records*, installing *Domain Keys*, *IP rDNS* and registering feed back loops. Do you know how to register your domain with Gmail? Do you know how to register your IP with MSN. No Doubt, MMS Servers are your best choice! Only MMS email hosting servers provide a complete solution. From Month to Month email server access, Affordable Yearly plans, Dedicated IP email servers and Whitelisted email server, Shared SMTP servers, Dedicated SMTP Bulk servers. Plans including our award winning software Mass Mailer, opt-out page, newsletter templates and state-of-art email cleaners. MMS email servers include guaranteed clean IPs with high IP reputation from our US and UK based data centers. Pricing Emails Per Month Price Place Order *Plan 1* *100,000*-*400,000* *$100* Order Now http://clients.massmailservers.net/cart.php?a=addpid=9 *Plan 2* *400,000-100,* *$150* Order Now http://clients.massmailservers.net/cart.php?a=addpid=10 *Plan 3* *100,-200,* *$200* Order Now http://clients.massmailservers.net/cart.php?a=addpid=11 *Plan 4* *200,-300,* *$250* Order Now http://clients.massmailservers.net/cart.php?a=addpid=12 *Unlimited* *Send Unlimited number of emails* Click Here Dedicated Email Serverhttp://www.massmailservers.net/services/dedicated-bulk-email-servers-2/ *Discount Coupon: *2011 (apply this coupon and get 25% discount on all packages). - Key Features - 1. One Dedicated IP *(free ip replacement if become blacklist).* - 2. One SMTP/POP account. - 3. RDNS. - 4. Domain Keys. - 5. SPF Records. - 6. Send your messages in both Text and HTML format. - 7. Your ISP won’t see that you are sending out bulk email! - 8. All email broadcasting is routed through our bulk email servers and bandwidth – not yours. - 9. Gets email delivered directly from your PC into your recipient’s mailbox without using your ISP’s e-mail server resources! - 10. Broadcast your bulk email marketing campaigns anytime from any location in the world. - 11. Port 25 ISP not required (not affected by port 25 blocking issues). - 12. No long term contracts. - 13.* Reliability and 100% Bulk Friendly Guaranteed!* - 14. Includes all phone, email, and chat technical support 24/7. - 15.* No hourly or daily limit!!* ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Unable to reply immediately Re: [WARNING: VIRUS REMOVED] Delivery reports about your e-mail
I shall be reading emails only very intermittently until August 7th, but will reply as soon as I can. If you have a query concerning the MA in Aegean Archaeology, please contact Kathryn Goldsack (k.golds...@sheffield.ac.uk). Sue Sherratt -- Dr E.S. Sherratt Department of Archaeology University of Sheffield Northgate House West Street Sheffield S1 4ET http://www.archatlas.dept.shef.ac.uk/Home.php ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
E-Mail scaling question
Hello All, My company needs a [new] e-mail solution for a product rollout. Rather than have a few e-mail domains with lots of addresses, the solution we need is for a very few (mostly one, very rarely more than 3) accounts on upwards of tens of thousands of domains. I can't find any info on scaling sendmail or postfix to this many domains. If anyone has any info, knowledge, horror stories, etc. It would be greatly appreciated Also, I am assuming that to play nice, we need a dedicated IP per domain, so I may have to survive setting that up before I even get to the e-mail. If anyone knows of a legitimate way to set up an e-mail domain on a shared IP and not have half of the e-mail servers assume we are spammers, let me know. Thanks in advance Mark Moellering classcreator.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: E-Mail scaling question
On Tue, Dec 21, 2010 at 2:39 PM, Mark Moellering m...@msen.com wrote: Hello All, My company needs a [new] e-mail solution for a product rollout. Rather than have a few e-mail domains with lots of addresses, the solution we need is for a very few (mostly one, very rarely more than 3) accounts on upwards of tens of thousands of domains. I can't find any info on scaling sendmail or postfix to this many domains. If anyone has any info, knowledge, horror stories, etc. It would be greatly appreciated Also, I am assuming that to play nice, we need a dedicated IP per domain, so I may have to survive setting that up before I even get to the e-mail. If anyone knows of a legitimate way to set up an e-mail domain on a shared IP and not have half of the e-mail servers assume we are spammers, let me know. Thanks in advance Mark Moellering classcreator.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org You can set an IP only for mail for all the domains and point the MX Records to it. The PTR record just point it to the server real name and thats it. -- Still Going Strong!!! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: E-Mail scaling question
On Dec 21, 2010, at 11:39 AM, Mark Moellering wrote: My company needs a [new] e-mail solution for a product rollout. Rather than have a few e-mail domains with lots of addresses, the solution we need is for a very few (mostly one, very rarely more than 3) accounts on upwards of tens of thousands of domains. I don't see much value in setting up tens of thousands of what sound like vanity domains, but you'll need postmaster@ working at each of these domains to be even minimally compliant with RFC-822/2822/etc, and most people expect abuse@ to work also. I can't find any info on scaling sendmail or postfix to this many domains. If anyone has any info, knowledge, horror stories, etc. It would be greatly appreciated You'll want to use hash table map type for sendmail's virtusertable or Postfix's virtual table-- see /usr/share/sendmail/cf/README or /usr/local/share/doc/postfix/VIRTUAL_README. Also, I am assuming that to play nice, we need a dedicated IP per domain, so I may have to survive setting that up before I even get to the e-mail. If anyone knows of a legitimate way to set up an e-mail domain on a shared IP and not have half of the e-mail servers assume we are spammers, let me know. There's nothing unusual about having one IP serve as the MX for many domains. After all, many hosting companies provided a shared email solution. What matters most to spam checking is the mail contents, whether forward and reverse DNS match, whether postmaster@ and abuse@ works, and whether bounces, address verification, etc are handled properly. Regards, -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: E-Mail scaling question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 21/12/2010 19:39, Mark Moellering wrote: Hello All, My company needs a [new] e-mail solution for a product rollout. Rather than have a few e-mail domains with lots of addresses, the solution we need is for a very few (mostly one, very rarely more than 3) accounts on upwards of tens of thousands of domains. I can't find any info on scaling sendmail or postfix to this many domains. If anyone has any info, knowledge, horror stories, etc. It would be greatly appreciated Also, I am assuming that to play nice, we need a dedicated IP per domain, so I may have to survive setting that up before I even get to the e-mail. If anyone knows of a legitimate way to set up an e-mail domain on a shared IP and not have half of the e-mail servers assume we are spammers, let me know. Thanks in advance Mark Moellering classcreator.com Any (or almost any) MTA you pick is able to handle 100's of domains with few addresses on them. Once you start running AV/Antispam and work our expected volume you may start thinking about performance issues... Question is what are you actually trying to achieve? Objectives? what is your business problem? Start from there and work your way out. There are plenty of companies offering hosted mail solution which may turn way cheaper then doing it yourself and so on. - -- bEsT rEgArDs| Confidence is what you have before you tomasz dereszynski | understand the problem. -- Woody Allen | Spes confisa Deo| In theory, theory and practice are much numquam confusa recedit | the same. In practice they are very | different. -- Albert Einstein -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNETXsAAoJEF8D4Gbs1j4hS4QIALlbqNOI3mjFJ54qsltHJ+za uuwEpUBro6anypYew+pdom2RXoSkNI0lsEnL9Yp73fa7Bgj/MWfjvqsBOCJn1oVS 4fovXamsS+2Xu/msOEE09krSMW5bKOLm5PUxcpLdBLDauZgPx4YmEaqGcgKhH884 YUtKtT2suJvCitvPW8pnfc3jUYAmvs+GFjMVcDDXVmumQxDmk3DRFpqZGtbdzE9d m47JWxxnmZAyAalZ87Bn8Dnc3BTzsdEQGF4gfyQ+3ai2e037a0/35Bc92Z6gZXFP FqWMa/b8Z/UV33+U+7jhJ9cQBssBT/jKF/OXlfkar0A4e9+VW7ruBbQow2yqOPY= =54/i -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: change the password e-mail account
All senders, with this the contents of letter, an urgent need to change the password e-mail account! I think that broke password mailboxes... From my email too, came a letter to the mailing list, but I did not send it :( Bull$hit, You can knock that crap off right now or your no better than the person that set this garbage up or your the person behind it trying to work some social engineering tactic that is playing out like a script kiddie on k00laid. Regards, -- jhell,v ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
change the password e-mail account
В Thu, 19 Aug 2010 07:04:10 -0400 Jerry freebsd.u...@seibercom.net пишет: On Thu, 19 Aug 2010 19:57:28 +1000 Roland Smith rsm...@xs4all.nl articulated: Dear Sir/Madam, Your email was unable reach the intended person that you were sending it to. For more information on our business please click on the following link: [1]Click here for our website We look forward to your continued business in the future. Regards, Webmaster References 1. http://www.downwind.com.au/avdir/rd.php?id=7564 Why is this crap polluting this list? I have been receiving multiple copies of this junk for awhile now. The link simple redirects to: http://www.searchmagna.com/?domain=xpbargains.netfolder=404648785ts=pl Isn't there any way to stop this garbage? All senders, with this the contents of letter, an urgent need to change the password e-mail account! I think that broke password mailboxes... From my email too, came a letter to the mailing list, but I did not send it :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [6.3] Get e-mail when CTRL-ALT-DEL is used?
On Thu, 08 Jul 2010 14:29:59 +0400, ait a...@rocc.ru wrote: Maybe you can use the /etc/rc.shutdown script, there's a line at the end of it: Thanks everyone for the help. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
[6.3] Get e-mail when CTRL-ALT-DEL is used?
Hello This is on a remote 6.3 host: I'd like to get an e-mail if a user hits the CTRL-ALT-DEL to reboot the server. Googling told me that the use of the three-key combo can be enabled/disabled when compiling a new kernel, but not how to manage this feature when it's enabled in a running kernel. Is there a configuration file somewhere that would let me add e-mail support for this action? Thank you. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [6.3] Get e-mail when CTRL-ALT-DEL is used?
On 07/08/2010 14:12, Gilles wrote: Hello This is on a remote 6.3 host: I'd like to get an e-mail if a user hits the CTRL-ALT-DEL to reboot the server. Googling told me that the use of the three-key combo can be enabled/disabled when compiling a new kernel, but not how to manage this feature when it's enabled in a running kernel. Is there a configuration file somewhere that would let me add e-mail support for this action? Thank you. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org Maybe you can use the /etc/rc.shutdown script, there's a line at the end of it: ... # Insert other shutdown procedures here ... Best wishes, Dmitry. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [6.3] Get e-mail when CTRL-ALT-DEL is used?
On Thu, Jul 08, 2010 at 12:12:27PM +0200, Gilles wrote: This is on a remote 6.3 host: I'd like to get an e-mail if a user hits the CTRL-ALT-DEL to reboot the server. Googling told me that the use of the three-key combo can be enabled/disabled when compiling a new kernel, but not how to manage this feature when it's enabled in a running kernel. Is there a configuration file somewhere that would let me add e-mail support for this action? Assuming you want to know whether the server was rebooted (as opposed to whether a user invoked a given key combination), adding something along the lines of the following to root's crontab(5) should suffice: @reboot echo `hostname` rebooted \ | mail -s `hostname` rebooted gil...@example.org -- George ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [6.3] Get e-mail when CTRL-ALT-DEL is used?
On Thu, 08 Jul 2010 12:12:27 +0200 Gilles gilles.gana...@free.fr wrote: Hello This is on a remote 6.3 host: I'd like to get an e-mail if a user hits the CTRL-ALT-DEL to reboot the server. Googling told me that the use of the three-key combo can be enabled/disabled when compiling a new kernel, but not how to manage this feature when it's enabled in a running kernel. If you put hw.syscons.kbd_reboot=0 in /etc/sysctl.conf, reboot by CTRL-ALT-DEL is disabled. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
downloading e-mail is blocking network
Hi, I'm having a strange network problem. Every day, when I turn on my computer, fetchmail is started and procmail is putting all my mail in the correct mailboxes. This takes some time because I receive a few hundred e-mails a day (mostly mailing lists). The strange thing is that when the e-mail is being downloaded, all other network traffic seems blocked. So browsing the internet is not possible when fetchmail/procmail is busy. At first I thought I had a problem with DNS and/or DHCP and/or my ADSL modem because after a reset of the modem, the problem mostly went away, and there were some hostname not found errors in my logfiles. But today I just waited for a while and discovered that when fetchmail/procmail is finished, the internet suddenly was reachable again. So has anyone has seen fetchmail/procmail blocking network traffic before? Regards, Marco -- You may my glories and my state dispose, But not my griefs; still am I king of those. -- William Shakespeare, Richard II ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: downloading e-mail is blocking network
Hi, Marco-- On May 19, 2010, at 12:15 PM, Marco Beishuizen wrote: I'm having a strange network problem. Every day, when I turn on my computer, fetchmail is started and procmail is putting all my mail in the correct mailboxes. This takes some time because I receive a few hundred e-mails a day (mostly mailing lists). The strange thing is that when the e-mail is being downloaded, all other network traffic seems blocked. So browsing the internet is not possible when fetchmail/procmail is busy. At first I thought I had a problem with DNS and/or DHCP and/or my ADSL modem because after a reset of the modem, the problem mostly went away, and there were some hostname not found errors in my logfiles. But today I just waited for a while and discovered that when fetchmail/procmail is finished, the internet suddenly was reachable again. So has anyone has seen fetchmail/procmail blocking network traffic before? Are you using NAT? It sounds like something has a limited number of NAT state slots available, and is dropping connections past that limit. It probably will help to try to serialize the activity of fetchmail / procmail so that they aren't opening new connections for every email being processed, if that is what is going on. Regards, -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: downloading e-mail is blocking network
On 19 May 2010 20:21, Chuck Swiger cswi...@mac.com wrote: Hi, Marco-- On May 19, 2010, at 12:15 PM, Marco Beishuizen wrote: I'm having a strange network problem. Every day, when I turn on my computer, fetchmail is started and procmail is putting all my mail in the correct mailboxes. This takes some time because I receive a few hundred e-mails a day (mostly mailing lists). The strange thing is that when the e-mail is being downloaded, all other network traffic seems blocked. So browsing the internet is not possible when fetchmail/procmail is busy. At first I thought I had a problem with DNS and/or DHCP and/or my ADSL modem because after a reset of the modem, the problem mostly went away, and there were some hostname not found errors in my logfiles. But today I just waited for a while and discovered that when fetchmail/procmail is finished, the internet suddenly was reachable again. So has anyone has seen fetchmail/procmail blocking network traffic before? Are you using NAT? It sounds like something has a limited number of NAT state slots available, and is dropping connections past that limit. It probably will help to try to serialize the activity of fetchmail / procmail so that they aren't opening new connections for every email being processed, if that is what is going on. Regards, -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I'd be surprised if its that as you would have to have 1000's of connections open to cause an issue like that, even one a fairly low end router. One simple way round would be to schedule your computer to turn on an hour or so before you need to use it. A lot of bios have this feature these days ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: downloading e-mail is blocking network
On Wed, 19 May 2010, Chuck Swiger wrote: Are you using NAT? Not that I know of. It sounds like something has a limited number of NAT state slots available, and is dropping connections past that limit. It probably will help to try to serialize the activity of fetchmail / procmail so that they aren't opening new connections for every email being processed, if that is what is going on. Seems worth trying to increase this number but how do I do that? Is this changable in FreeBSD or do I change this in the modem (couldn't find anything about this in the modem though)? Regards, Marco -- Women who want to be equal to men lack imagination. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: downloading e-mail is blocking network
On May 19, 2010, at 1:44 PM, Marco Beishuizen wrote: On Wed, 19 May 2010, Chuck Swiger wrote: Are you using NAT? Not that I know of. You presumably would know from the IP your machine has-- if it's RFC-1918 unroutable, NAT is involved. It sounds like something has a limited number of NAT state slots available, and is dropping connections past that limit. It probably will help to try to serialize the activity of fetchmail / procmail so that they aren't opening new connections for every email being processed, if that is what is going on. Seems worth trying to increase this number but how do I do that? Is this changable in FreeBSD or do I change this in the modem (couldn't find anything about this in the modem though)? It would be in whatever device is doing NAT, assuming it is being used. Running tcpdump against your traffic during this sort of problem would likely be informative. Regards, -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: downloading e-mail is blocking network
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 19/05/2010 21:48:36, Chuck Swiger wrote: On May 19, 2010, at 1:44 PM, Marco Beishuizen wrote: On Wed, 19 May 2010, Chuck Swiger wrote: Are you using NAT? Not that I know of. You presumably would know from the IP your machine has-- if it's RFC-1918 unroutable, NAT is involved. It sounds like something has a limited number of NAT state slots available, and is dropping connections past that limit. It probably will help to try to serialize the activity of fetchmail / procmail so that they aren't opening new connections for every email being processed, if that is what is going on. Seems worth trying to increase this number but how do I do that? Is this changable in FreeBSD or do I change this in the modem (couldn't find anything about this in the modem though)? It would be in whatever device is doing NAT, assuming it is being used. Running tcpdump against your traffic during this sort of problem would likely be informative. Hmmm... I wonder if it could be something like this? http://www.benzedrine.cx/ackpri.html although at first glance, the traffic flows would be in the wrong direction to trigger this effect. Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW -BEGIN PGP SIGNATURE- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkv0x5sACgkQ8Mjk52CukIzCBACdGFOr54HVxLPV6XRwK9PFu6KF zhsAnRm4m7sIH9/CeMXKIcopWhubbn2G =DJjY -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Delivery reports about your e-mail [Incident:100201-010615]
--- Thanks for contacting BigPond.We aim to respond to your email query within two business days, however due to a larger than expected demand for our services wait times are currently exceeding two business days. We apologise for any inconvenience and will get back to you with an answer to your query as soon as possible. Kind regards,The BigPond Team nbsp;Privacynbsp;nbsp;nbsp;|nbsp;nbsp;nbsp; Terms of Usereg; Registered trade mark of Telstra Corporation Limited. ABN 33 051 775 556.nbsp;nbsp;This communication may contain CONFIDENTIAL information of Telstra Corporation Limited (ABN 33 051 775 556). If you are not an intended recipient, you MUST NOT keep, forward, copy, use, save or rely on this communication, and any such action is unauthorised and prohibited. If you have received this communication in error, please reply to this e-mail to notify the sender of its incorrect delivery, and then delete both it and your reply.nbsp; ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
i've questions sure this e-mail for questions
hello sir i am wanyce ashoura from Libya i notice in Libya and Africa there is no community for BSD and i start manged some small group of bsd group so if that not bothering you cause my language english not so good ok and i am new in bsd world and i wasn't use windows xp sure i start with slackware and i notice there are bsd so i say let me test it and i like so much i want understanding this freebsd and openbsd and pcbsd not is distributor as gnu linux yes or not cause there just few os named bsd i know bsd is open source but not free software here i am not talk about free of charging . so my questions is bsd is not free software mean i cant make distributor on bsd is what i do now on my pc not distributor for business just for my own small work like manged my network with me friend's and play costuming every thing as i want so thank you for your time ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: i've questions sure this e-mail for questions
On January 9, 2010 07:28:24 pm libyan linux wrote: hello sir i am wanyce ashoura from Libya i notice in Libya and Africa there is no community for BSD and i start manged some small group of bsd group so if that not bothering you cause my language english not so good ok and i am new in bsd world and i wasn't use windows xp sure i start with slackware and i notice there are bsd so i say let me test it and i like so much i want understanding this freebsd and openbsd and pcbsd not is distributor as gnu linux yes or not cause there just few os named bsd i know bsd is open source but not free software here i am not talk about free of charging . so my questions is bsd is not free software mean i cant make distributor on bsd is what i do now on my pc not distributor for business just for my own small work like manged my network with me friend's and play costuming every thing as i want so thank you for your time ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org FreeBSD, OpenBSD and PC-BSD are all free software, and there is nothing I know of to stop you distributing and using them locally. You can find out more from http://en.wikipedia.org/wiki/BSD_licenses and from http://63.249.85.132/fbsd_intro.html Good luck - the software is of very high quality and very reliable. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: i've questions sure this e-mail for questions
On Sun, 10 Jan 2010 02:28:24 +0200 libyan linux libyan@gmail.com wrote: so my questions is bsd is not free software mean i cant make distributor on bsd is what i do now on my pc not distributor for business just for my own small work like manged my network with me friend's and play costuming every thing as i want so thank you for your time You can do what you like with it - including using it in commercial software. The GPL licence used by Linux is much more restrictive than the BSD licence. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Out of Office AutoReply: Delivery reports about your e-mail
Thank you for your e-mail, I am currently out of office as from Friday 10th August 2009 to 17th August 2009.For all operations and export related issues, Please contact Peterson Kimeu e- mail : peterson.ki...@swissportkenya.co.ke Regards steve Mutai 0723-580963 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
e-mail processing in C
I need to write a quick and not-too-dirty C program to process some e-mail. (Including dealing with mbox files.) Is there a standard library to do this? Respectfully, Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: e-mail processing in C
On Mar 24, 2008, at 11:32 AM, Robert Huff wrote: I need to write a quick and not-too-dirty C program to process some e-mail. (Including dealing with mbox files.) Is there a standard library to do this? You probably want to invoke formail, which is part of the mail/ procmail port. -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Email processing in Python (was: e-mail processing in C)
On Mon, 24 Mar 2008 14:32:02 -0400, Robert Huff [EMAIL PROTECTED] wrote: I need to write a quick and not-too-dirty C program to process some e-mail. (Including dealing with mbox files.) Is there a standard library to do this? Respectfully, No, there's no library for `email processing' in the C standard. You can probably find a lot of non-standard ones, by Googling however :) It's worth writing that plain C is the wrong language for this sort of thing, if you ask me. There are excellent high-level libraries in Perl, and Python to do this sort of thing. Email processing is going to require a log of string processing, and C is notoriously 'tricky' for this sort of thing. As an example of the expressiveness of using a higher level language, you can display the authors of all the messages in a UNIX mailbox with the following short Python script: import mailbox m = mailbox.mbox('/home/keramida/mbox') for message in m: author = m['from] print author This is not just a `readable pseudo-code-like example'. It's *real* Python code, that you can run _now_ in your Python shell. To perform a similar task in plain C you will need several dozens of lines of code, and it won't necessarily be as readable. It _may_ be faster, in some cases, but it will probably won't be as 'safe'. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: e-mail processing in C
In the last episode (Mar 24), Robert Huff said: I need to write a quick and not-too-dirty C program to process some e-mail. (Including dealing with mbox files.) Is there a standard library to do this? You can use the c-client library for this; it's what the pine email client uses. http://www.washington.edu/imap/documentation/internal.txt.html lists all the functions available, and I believe there are sample programs in the imap-uw source package that demonstrate how to read and write messages to mailboxes. -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Email processing in Python (was: e-mail processing in C)
Searching real quick shows the existence of both libmime and libmbox... don't know if they're maintained. Another option would be to dig out the associated code in pine, elm, or whatnot. See how they access mail. -Patrick On 24/03/2008, Giorgos Keramidas [EMAIL PROTECTED] wrote: On Mon, 24 Mar 2008 14:32:02 -0400, Robert Huff [EMAIL PROTECTED] wrote: I need to write a quick and not-too-dirty C program to process some e-mail. (Including dealing with mbox files.) Is there a standard library to do this? Respectfully, No, there's no library for `email processing' in the C standard. You can probably find a lot of non-standard ones, by Googling however :) It's worth writing that plain C is the wrong language for this sort of thing, if you ask me. There are excellent high-level libraries in Perl, and Python to do this sort of thing. Email processing is going to require a log of string processing, and C is notoriously 'tricky' for this sort of thing. As an example of the expressiveness of using a higher level language, you can display the authors of all the messages in a UNIX mailbox with the following short Python script: import mailbox m = mailbox.mbox('/home/keramida/mbox') for message in m: author = m['from] print author This is not just a `readable pseudo-code-like example'. It's *real* Python code, that you can run _now_ in your Python shell. To perform a similar task in plain C you will need several dozens of lines of code, and it won't necessarily be as readable. It _may_ be faster, in some cases, but it will probably won't be as 'safe'. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Email processing in Python (was: e-mail processing in C)
Giorgos Keramidas writes: No, there's no library for `email processing' in the C standard. You can probably find a lot of non-standard ones, by Googling however :) It's worth writing that plain C is the wrong language for this sort of thing, if you ask me. There are excellent high-level libraries in Perl, and Python to do this sort of thing. On one hand, that's probably true. On the other hand: I know zero Python and this much Perl. I tried Perl, actually, and couldn't find the functions I needed. (Plus the documemtation was aimed at a more experienced audience.) I can fumble my way around a decent C packagei less time ad with less hair-rending. I do have the advantage I know more-or-less exactly what the message will look like. Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Email processing in Python (was: e-mail processing in C)
Le Mon 24/03/2008, Patrick C disait Searching real quick shows the existence of both libmime and libmbox... don't know if they're maintained. Another option would be to dig out the associated code in pine, elm, or whatnot. See how they access mail. -Patrick libPAN (or is it libEtPAN ?) is also a C library for mail processing -- Erwan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Email processing in Python (was: e-mail processing in C)
On Mar 24, 2008, at 2:04 PM, Patrick C wrote: Another option would be to dig out the associated code in pine, elm, or whatnot. See how they access mail. What is used in pine (now alpine) is the c-client libraries already mentioned in another post. -j -- Jeffrey Goldberghttp://www.goldmark.org/jeff/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: e-mail to root
On Dec 19, 2007, at 7:30 PM, Kurt Buff wrote: On Dec 19, 2007 6:54 PM, jekillen [EMAIL PROTECTED] wrote: Hello: Is there a manual or other publication that deals specifically with reading e-mail messages to root for FreeBSD? I have gotten a message: setuid diffs: --- /var/log/setuid.today Sat Sep 8 03:01:34 2007 +++ /tmp/security.9Jz0CWds Wed Dec 19 03:01:38 2007 followed by references to various programs then the next segment: Checking for a current audit database: Downloading fresh database. auditfile.tbz 46 kB 42 kBps New database installed. Database created: Wed Dec 19 14:40:00 PST 2007 Checking for packages with security vulnerabilities: followed by numerous references to programs and files on the FreeBSD site. and I do not know quite what this means. It means that you have portaudit installed, and it's run as part of the daily scripts. That's a good thing. I'd recommend consulting the portaudit man page What it's found are packages on your machine that have security bulletins against them - that is, the packages named have vulnerabilities known to the FreeBSD Security team, which they believe should be patched. There's a link to the bulletin for each one - I think you'll find it enlightening to read some or all of them. I'd do a 'pkg_add -r portupgrade' to install that package, do a cvsup to get a current ports tree, then assess, very carefully, what you want to upgrade. IMHO all of the packages mentioned should probably get upgraded, unless you have *exceptional* reasons not to. To upgrade you can do 'portupgrade packagename' for each package named, or if you're feeling bold, 'portupgrade -aRr'. I know that setuid is cause for concern. I have three other machines with FreeBSD, with one going back over a year of virtually continuous 24/7 operation and this is the first time I have seen this type of message. For the programs reported with security problems it begs the question of dependencies if they are removed or updated. Some references are to cups and fetchmail neither of which I use or have use for, that I am aware of. Portupgrade will take care of dependencies. No worries, though you should also peruse the man page for portupgrade to get your knowledge up. This particular machine is primarily a web server. It does have Postfix running but just uses local delivery and only listens on private network interface. I am also a little dubious about posting any specifics to a public mailing list. I am admittedly a novice at this (on all my own systems so no one else's behind is on the line). Short of paying consultation fees to someone, this is about the only live contact I have on the subject. Thanks in advance for info: We were all novices - I still am, in far too many ways. Don't sweat it, and keep asking questions. Also, start reading the FreeBSD Handbook - it's online, and also downloadable, and covers this very topic. Kurt Thank you kindly for the info; I have been reading the handbook. I have it installed as html on my everyday work machine. Having a web server on localhost is great. It does cover portupgrade, portsnap, ports and all that but it was just the e-mails to root that had me confused. Does this also cover the setuid question also? I also have the new Absolute FreeBSD, and the hard copy manual obtained through FreeBSD Mall. I had a problem with e-mail messages to root some time ago that were showing up every 11 minutes. I look into crontab and found one script that was set to run every 11 minutes. I opened the script file and read the authors e-mail address and sent him an e-mail on the problem. He responded scolding me for putting commands in rc.conf. Sure enough, though I did not have explicit commands in it, I did have the syntax wrong. Who would have guess that a script dealing with entropy would complain because of problems with rc.conf? That is an example of question that might arise that could use some specific coverage in documentation. Jeff K ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: e-mail to root
On Dec 20, 2007 4:20 PM, jekillen [EMAIL PROTECTED] wrote: mucho snippage Thank you kindly for the info; De nada - pass it along when you have the chance. I have been reading the handbook. I have it installed as html on my everyday work machine. Having a web server on localhost is great. It does cover portupgrade, portsnap, ports and all that but it was just the e-mails to root that had me confused. Does this also cover the setuid question also? I don't remember, quite frankly. I just know that I get two emails each day from each of my machines, take a quick look at them, and act on them as appropriate. I also have the new Absolute FreeBSD, and the hard copy manual obtained through FreeBSD Mall. I had a problem with e-mail messages to root some time ago that were showing up every 11 minutes. I look into crontab and found one script that was set to run every 11 minutes. I opened the script file and read the authors e-mail address and sent him an e-mail on the problem. He responded scolding me for putting commands in rc.conf. Sure enough, though I did not have explicit commands in it, I did have the syntax wrong. Who would have guess that a script dealing with entropy would complain because of problems with rc.conf? That is an example of question that might arise that could use some specific coverage in documentation. Who would have guessed? Someone with more experience, or someone with good documentation in hand who's read it. If the documentation is lacking, I'll bet there are people who would appreciate your input. Seriously. I've absorbed my knowledge from so many sources (books, magazines, lists like this one) over such a long period of time, that I can no longer remember where I got any particular fact, in most cases. That's not always a good thing. BTW - If you're [contemplating] doing sysadmin work professionally, I'd highly recommend the following books. The first two are recommended even if you're doing this as a hobby. The Limoncelli book I recommend especially highly to anyone in their early-to-middle career as a sysadmin who wants a coherent way to look at the craft. I have just ordered the 2nd edition, after reading the 1st a couple of times. http://www.bookpool.com/sm/0130206016 http://www.bookpool.com/sm/0201702452 http://www.bookpool.com/sm/0596003439 http://www.bookpool.com/sm/0321492668 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
e-mail to root
Hello: Is there a manual or other publication that deals specifically with reading e-mail messages to root for FreeBSD? I have gotten a message: setuid diffs: --- /var/log/setuid.today Sat Sep 8 03:01:34 2007 +++ /tmp/security.9Jz0CWds Wed Dec 19 03:01:38 2007 followed by references to various programs then the next segment: Checking for a current audit database: Downloading fresh database. auditfile.tbz 46 kB 42 kBps New database installed. Database created: Wed Dec 19 14:40:00 PST 2007 Checking for packages with security vulnerabilities: followed by numerous references to programs and files on the FreeBSD site. and I do not know quite what this means. I know that setuid is cause for concern. I have three other machines with FreeBSD, with one going back over a year of virtually continuous 24/7 operation and this is the first time I have seen this type of message. For the programs reported with security problems it begs the question of dependencies if they are removed or updated. Some references are to cups and fetchmail neither of which I use or have use for, that I am aware of. This particular machine is primarily a web server. It does have Postfix running but just uses local delivery and only listens on private network interface. I am also a little dubious about posting any specifics to a public mailing list. I am admittedly a novice at this (on all my own systems so no one else's behind is on the line). Short of paying consultation fees to someone, this is about the only live contact I have on the subject. Thanks in advance for info: Jeff K ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: e-mail to root
On Dec 19, 2007 6:54 PM, jekillen [EMAIL PROTECTED] wrote: Hello: Is there a manual or other publication that deals specifically with reading e-mail messages to root for FreeBSD? I have gotten a message: setuid diffs: --- /var/log/setuid.today Sat Sep 8 03:01:34 2007 +++ /tmp/security.9Jz0CWds Wed Dec 19 03:01:38 2007 followed by references to various programs then the next segment: Checking for a current audit database: Downloading fresh database. auditfile.tbz 46 kB 42 kBps New database installed. Database created: Wed Dec 19 14:40:00 PST 2007 Checking for packages with security vulnerabilities: followed by numerous references to programs and files on the FreeBSD site. and I do not know quite what this means. It means that you have portaudit installed, and it's run as part of the daily scripts. That's a good thing. I'd recommend consulting the portaudit man page What it's found are packages on your machine that have security bulletins against them - that is, the packages named have vulnerabilities known to the FreeBSD Security team, which they believe should be patched. There's a link to the bulletin for each one - I think you'll find it enlightening to read some or all of them. I'd do a 'pkg_add -r portupgrade' to install that package, do a cvsup to get a current ports tree, then assess, very carefully, what you want to upgrade. IMHO all of the packages mentioned should probably get upgraded, unless you have *exceptional* reasons not to. To upgrade you can do 'portupgrade packagename' for each package named, or if you're feeling bold, 'portupgrade -aRr'. I know that setuid is cause for concern. I have three other machines with FreeBSD, with one going back over a year of virtually continuous 24/7 operation and this is the first time I have seen this type of message. For the programs reported with security problems it begs the question of dependencies if they are removed or updated. Some references are to cups and fetchmail neither of which I use or have use for, that I am aware of. Portupgrade will take care of dependencies. No worries, though you should also peruse the man page for portupgrade to get your knowledge up. This particular machine is primarily a web server. It does have Postfix running but just uses local delivery and only listens on private network interface. I am also a little dubious about posting any specifics to a public mailing list. I am admittedly a novice at this (on all my own systems so no one else's behind is on the line). Short of paying consultation fees to someone, this is about the only live contact I have on the subject. Thanks in advance for info: We were all novices - I still am, in far too many ways. Don't sweat it, and keep asking questions. Also, start reading the FreeBSD Handbook - it's online, and also downloadable, and covers this very topic. Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Fri, Oct 05, 2007 at 02:33:23AM +1000, Ian Smith wrote: Looks like that's exactly right. Copying the maintainer and suggesting the no-brain patch, pardon the broken tabs from pasting, against the head / stable versions (checked) .. I should sendPR I guess .. time! Cheers, Ian --- /usr/sbin/rmuserSat Mar 3 16:48:29 2007 +++ /home/smithi/rmuser Fri Oct 5 00:30:51 2007 @@ -86,10 +86,10 @@ echo -n mailspool rm ${MAILSPOOL}/$login fi - if [ -f ${MAILSPOOL}/${login}.pop ]; then - verbose echo -n ${MAILSPOOL}/${login}.pop || + if [ -f ${MAILSPOOL}/.${login}.pop ]; then + verbose echo -n ${MAILSPOOL}/.${login}.pop || echo -n pop3 - rm ${MAILSPOOL}/${login}.pop + rm ${MAILSPOOL}/.${login}.pop fi verbose echo '.' } Thanks! I'll take care of this immediately. Cheers, Mike. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Wed, 3 Oct 2007 16:30:54 -0400 Lisa Casey [EMAIL PROTECTED] wrote: The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? I've read this whole thread, and what's strange is that this used to work. I just checked our old FreeBSD 2.2.6 system where rmuser always cleaned up /var/mail/.{$user}.pop properly. Its /usr/sbin/rmuser had: # Remove some pop daemon's leftover file $file = $mail_dir/.${login_name}.pop; if (-e $file || -l $file) { print STDERR Removing pop daemon's temporary mail file ${file}:; unlink $file || print STDERR \n${whoami}: Warning: unlink on $file failed ($!) - continuing\n; print STDERR done.\n; } So I wonder whether it's a bug - or maybe a later popper update? - that has the present version of rmuser looking for ${MAILSPOOL}/${login}.pop instead? Cheers, Ian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Thu, Oct 04, 2007 at 04:56:35PM +1000, Ian Smith wrote: On Wed, 3 Oct 2007 16:30:54 -0400 Lisa Casey [EMAIL PROTECTED] wrote: The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? I've read this whole thread, and what's strange is that this used to work. I just checked our old FreeBSD 2.2.6 system where rmuser always cleaned up /var/mail/.{$user}.pop properly. Its /usr/sbin/rmuser had: # Remove some pop daemon's leftover file $file = $mail_dir/.${login_name}.pop; if (-e $file || -l $file) { print STDERR Removing pop daemon's temporary mail file ${file}:; unlink $file || print STDERR \n${whoami}: Warning: unlink on $file failed ($!) - continuing\n; print STDERR done.\n; } So I wonder whether it's a bug - or maybe a later popper update? - that has the present version of rmuser looking for ${MAILSPOOL}/${login}.pop instead? As far as I can tell the change was introduced back in 2002 when rmuser was changed from a Perl program into a shell script - presumably as part of the process of removing Perl from the base system. FreeBSD versions 2.2 - 4.11 used the Perl version of rmuser, while all 5.x and 6.x releases have used the shell script version. I have no idea if the difference - if the file rmuser looks for has a leading '.' in the filename or not - was deliberate or simply a mistake, but I suspect the latter: it is the kind of thing that is very easy to miss when rewriting a program in another language. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Thu, 4 Oct 2007, Erik Trulsson wrote: On Thu, Oct 04, 2007 at 04:56:35PM +1000, Ian Smith wrote: On Wed, 3 Oct 2007 16:30:54 -0400 Lisa Casey [EMAIL PROTECTED] wrote: The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? I've read this whole thread, and what's strange is that this used to work. I just checked our old FreeBSD 2.2.6 system where rmuser always cleaned up /var/mail/.{$user}.pop properly. Its /usr/sbin/rmuser had: # Remove some pop daemon's leftover file $file = $mail_dir/.${login_name}.pop; if (-e $file || -l $file) { print STDERR Removing pop daemon's temporary mail file ${file}:; unlink $file || print STDERR \n${whoami}: Warning: unlink on $file failed ($!) - continuing\n; print STDERR done.\n; } So I wonder whether it's a bug - or maybe a later popper update? - that has the present version of rmuser looking for ${MAILSPOOL}/${login}.pop instead? As far as I can tell the change was introduced back in 2002 when rmuser was changed from a Perl program into a shell script - presumably as part of the process of removing Perl from the base system. FreeBSD versions 2.2 - 4.11 used the Perl version of rmuser, while all 5.x and 6.x releases have used the shell script version. I have no idea if the difference - if the file rmuser looks for has a leading '.' in the filename or not - was deliberate or simply a mistake, but I suspect the latter: it is the kind of thing that is very easy to miss when rewriting a program in another language. Looks like that's exactly right. Copying the maintainer and suggesting the no-brain patch, pardon the broken tabs from pasting, against the head / stable versions (checked) .. I should sendPR I guess .. time! Cheers, Ian --- /usr/sbin/rmuserSat Mar 3 16:48:29 2007 +++ /home/smithi/rmuser Fri Oct 5 00:30:51 2007 @@ -86,10 +86,10 @@ echo -n mailspool rm ${MAILSPOOL}/$login fi - if [ -f ${MAILSPOOL}/${login}.pop ]; then - verbose echo -n ${MAILSPOOL}/${login}.pop || + if [ -f ${MAILSPOOL}/.${login}.pop ]; then + verbose echo -n ${MAILSPOOL}/.${login}.pop || echo -n pop3 - rm ${MAILSPOOL}/${login}.pop + rm ${MAILSPOOL}/.${login}.pop fi verbose echo '.' } ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBsd e-mail question
Hi, I'm running Sendmail and Qpopper on FreeBsd. (And perhaps I ought to be asking this on the Qpopper list, but hopefully someone here knows an answer). We have all of our mailboxes in mbox format in /var/mail. When a customer pops his mail for the first time it creates a file .username.pop in /var/mail which never goes away, it remains as a zero byte file. It's quite useful as we can tell from the timestamp on it when the customer last popped his mail. The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? Thanks, Lisa Casey ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Wed, Oct 03, 2007 at 04:30:54PM -0400, Lisa Casey wrote: The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? Since rmuser is a shell-script, you could easily change it to suit your needs. Look at the function rm_mail (lines 79-95), and change '${login}.pop' to '.${login}.pop' in line 89,90 and line 92. A more elegant approach would be to duplicate lines 89-93 and add the dot before the login in the second instance, changeing pop3 to qpopper as well. If you make this change, do not forget to re-apply it after doing a installworld. :-) Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) pgpZJ3KArWwo8.pgp Description: PGP signature
Re: FreeBsd e-mail question
Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? It really depends on what version of rmuser you have. In /usr/sbin/rmuser, do you have something similar to this code snippet?: if [ -f ${MAILSPOOL}/${login}.pop ]; then verbose echo -n ${MAILSPOOL}/${login}.pop || echo -n pop3 rm ${MAILSPOOL}/${login}.pop fi ...if so, try putting a . character before each instance of ${login}.pop. Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Wednesday 03 October 2007 22:30:54 Lisa Casey wrote: If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? rmuser is a shell script. There's 2 ways to solve this problem: 1) edit the rm_mail function in /usr/sbin/rmuser to use: ${MAILSPOOL}/.${login}.pop 2) Better option is to change the default temp-name in qpopper.config: set temp-name %s.pop so that rmuser will detect it automatically. -- Mel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
On Wed, Oct 03, 2007 at 11:04:58PM +0200, Mel wrote: On Wednesday 03 October 2007 22:30:54 Lisa Casey wrote: If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? rmuser is a shell script. There's 2 ways to solve this problem: 1) edit the rm_mail function in /usr/sbin/rmuser to use: ${MAILSPOOL}/.${login}.pop 2) Better option is to change the default temp-name in qpopper.config: set temp-name %s.pop so that rmuser will detect it automatically. A third option is to write a wrapper shell script that first calls rmuser and then removes the remaining mail drop file, and use this script to remove users instead of calling rmuser directly. Option 2) above sounds like a better solution though. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
At 03:30 PM 10/3/2007, Lisa Casey wrote: Hi, I'm running Sendmail and Qpopper on FreeBsd. (And perhaps I ought to be asking this on the Qpopper list, but hopefully someone here knows an answer). We have all of our mailboxes in mbox format in /var/mail. When a customer pops his mail for the first time it creates a file .username.pop in /var/mail which never goes away, it remains as a zero byte file. It's quite useful as we can tell from the timestamp on it when the customer last popped his mail. The problem comes in when a customer cancels his account. We remove users by rmuser username. That command removes the user from the password file, removes his home directory and removes the mailspool. What it doesn't do is to remove the .username.pop file associated with that mailbox. This isn't a problem unless we add another account with the same username. The new account cannot pop his mail because he gets the following error messge: -ERR [SYS/PERM] Temporary drop /var/mail/.jjvc.pop not owned by jjvc. If I take a look at /var/mail/.jjvc.pop it isn't owned by anyone, the ownership of the file is the group number of the original jjvc. -rw-rw 1 1473 mail 0 Sep 11 19:15 .jjvc.pop Is there anyway to have rmuser remover the mail drop file associated with that account also, or am I just going to have to remove these manually? Thanks, Lisa Casey Lisa, rmuser only removes the system dependent files that adduser creates. You would need to creat your own shell script to remove the qpopper file and to call rmuser. Remember the basic utilities are meant to manage the core services, not add-on ports. -Derek ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBsd e-mail question
Hi, 2) Better option is to change the default temp-name in qpopper.config: set temp-name %s.pop so that rmuser will detect it automatically. A third option is to write a wrapper shell script that first calls rmuser and then removes the remaining mail drop file, and use this script to remove users instead of calling rmuser directly. Option 2) above sounds like a better solution though. I agree, that sounds like the best solution. Just to be on the safe side, I think I'll make a backup of rmuser first ;-) Thanks for all the suggestions. Lisa Casey ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On Sat, 2007-07-14 at 19:14 -0400, Mikhail Teterin wrote: On субота 14 липень 2007, Daniel Bye wrote: = So it's beginning to look as if your best bet is in fact to make your = script handle sending the mail. Yeah, seems like it... = Not the cleanest solution, but one that will get your messages formatted = exactly how you want them. Well, I started looking into how much effort would it be to translate the strings returned by libmagic(3)'s routines into Content-Type. If it is easy enough, I could hack cron to analyze the job's output using magic_buffer(3) and set Content-Type if anything recognizable is detected... The translation is the difficult part :-( Instead of the standardized text/html for example, libmagic returns: HTML document text It is trying to be human-readable, while I need the machine-readable strings. There is stuff on-line that does the translation, but it is in much higher-level languages (like PHP), which think, hash-tables are free :-) Oh, well... -mi Or you could just use sendmail? 30 4 * * 1-6 ~/bin/foo 21 | sendmail [EMAIL PROTECTED] Sendmail will read in any headers you put into the message. Eg: $ cat sample.htmlh Subject: really? Really? will work just fine and set the email subject header when piped into sendmail. Or you could patch cron to use libmagic, and have cron scripts that will only work on one box. Hmmm, decisions, decisions... signature.asc Description: This is a digitally signed message part
Re: Can cron e-mail HTML?
On четвер 19 липень 2007, Tom Evans wrote: = Or you could patch cron to use libmagic Done: http://aldan.algebra.com/~mi/cron-mime.diff It even works now... = and have cron scripts that will only work on one box. And send-pr the diffs to FreeBSD :-) -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On Thu, 2007-07-19 at 07:55 -0400, Mikhail Teterin wrote: On четвер 19 липень 2007, Tom Evans wrote: = Or you could patch cron to use libmagic Done: http://aldan.algebra.com/~mi/cron-mime.diff It even works now... = and have cron scripts that will only work on one box. And send-pr the diffs to FreeBSD :-) -mi Sarcasm really doesn't work on the internet does it :) Teaching cron about file types/mime types is an awful idea - sounds like something you'd find in gentoo. Just because something can be done, doesn't mean it should be :) signature.asc Description: This is a digitally signed message part
Re: Can cron e-mail HTML?
On четвер 19 липень 2007, Tom Evans wrote: = Teaching cron about file types/mime types is an awful idea Why? My particular cron-job generates HTML. Somebody else's might generate a JPG image -- from their telescope every morning. There is no reason for these jobs to have to do the e-mailing on their own. Cron has this functionality, it just needs to be improved to match the modern-times expectations (MIME was introduced in the previous millennium.) And if you are worried about feature-creep, well, you should've objected back when piping to sendmail was put into cron in the first place. After all, ALL cron jobs (including the purely textual ones) could have explicit piping into a mailer... If you don't mind cron generating the From: and the Subject: headers, you should not mind it generating the Content-Type:. = - sounds like something you'd find in gentoo. And then I plan to add magick-handling to mail(1) -- to allow you to e-mail a file with the properly-set Content-Type. Yours, -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On Sat, Jul 14, 2007 at 06:21:16PM -0400, Mikhail Teterin typed: = To accomplish this I have my cron job run a script like this Sorry, I missed the most important part. Your script just uses /usr/bin/mail, the same way cron does. You are not adding anything, not already present in cron -- your script should simply produce output to stdout. Cron will mail all that to the address specified in MAILTO=... part of your crontab automatically. AFAIK, to make the e-mail message treated as a MIME one, the MIME-Version: 1.0 and Content-Type: ... have to be among _headers_. I'm afraid, it is not possible to directly manipulate the message's headers using mail(1), which is why I asked my question in the first place... Just for the record, cron seems to be using /usr/lib/sendmail, not mail(1): malenfant# grep -r _PATH_SENDMAIL /usr/src/usr.sbin/cron/cron/config.h #if !defined(_PATH_SENDMAIL) # define _PATH_SENDMAIL /usr/lib/sendmail #define MAILCMD _PATH_SENDMAIL /*-*/ malenfant# grep _PATH_SENDMAIL /usr/include/paths.h #define_PATH_SENDMAIL /usr/sbin/sendmail cheers, Ruben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
At 03:03 PM 7/14/2007, Mikhail Teterin wrote: Hello! I have a script launched from cron every morning, that gets certain data over the Internet from a remote computer, compares the new data with that from the previous day, and outputs the difference (if any). I'm relying on the fact, that cron e-mails me the output of each job. However, I modified the script recently to produce the output (if any) in HTML, rather than in plain-text format. The HTML arrives by e-mail just as well as plain text used to, but no e-mail program will render it as such, because neither the cron(8), nor the mail(1), which cron uses to send e-mail, creates MIME messages... How can I force the ``Content-Type: text/html'' header without hacking cron's sources? I'd rather avoid poluting my script with e-mail sending code... Maybe, cron should apply file(1)-like logic to the e-mailed content? Thanks for any hints. Yours, You need to change your script to send the email itself. I have many scripts that email reports, legs, and html reports. To accomplish this I have my cron job run a script like this (I have simplified the script you should be able to use it as a base): #!/usr/local/bin/ksh # set full paths for all commands needed, and files needed MAIL=/usr/bin/mail MAILFILE=/tmp/mail_file #fill in your correct email or alias you wish to use [EMAIL PROTECTED] RM=/bin/rm DATE=/bin/date AWK=/usr/bin/awk LS=/bin/ls GREP=/usr/bin/grep FIND=/usr/bin/find TODAY=`$DATE +%m-%d-%Y` REPORT_LOG_HEADER=/usr/local/etc/report_log_header REPORT_LOG_FOOTER=/usr/local/etc/report_log_footer # start the mailfile with the proper header, # in this case it is an HTML header cat $REPORT_LOG_HEADER $MAILFILE #put more stuff into the report . . . echo$MAILFILE echo$MAILFILE # Add any processing or log files to the middle of the mail file here # you can even put HTML codes in here echo BR BR $MAILFILE echo$MAILFILE # add the correct HTML footer cat $REPORT_LOG_FOOTER $MAILFILE # send it to yourself $MAIL -s the report name $MAILTO $MAILFILE $RM $MAILFILE -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
Mikhail Teterin wrote: On субота 14 липень 2007, Daniel Bye wrote: = So it's beginning to look as if your best bet is in fact to make your = script handle sending the mail. Yeah, seems like it... = Not the cleanest solution, but one that will get your messages formatted = exactly how you want them. Well, I started looking into how much effort would it be to translate the strings returned by libmagic(3)'s routines into Content-Type. If it is easy enough, I could hack cron to analyze the job's output using magic_buffer(3) and set Content-Type if anything recognizable is detected... The translation is the difficult part :-( Instead of the standardized text/html for example, libmagic returns: HTML document text It is trying to be human-readable, while I need the machine-readable strings. Is /usr/share/misc/magic.mime of any use? Apparently it is consulted by file(1) when called with -i. According to libmagic(3), magic_open() with the MAGIC_MIME flag should do the same. Cheers, Dan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On неділя 15 липень 2007, Daniel Bye wrote: = Is /usr/share/misc/magic.mime of any use? Apparently it is consulted by = file(1) when called with -i. According to libmagic(3), magic_open() with = the MAGIC_MIME flag should do the same. Yes, indeed -- just the ticket... Thanks. Now, I have not received any e-mails from the cron modified as per the linked patch yet, but if anyone cares to review it, please, do so. It compiles :-) http://aldan.algebra.com/~mi/cron-mime.diff It increases the application's buffering of the job's output from 1 character to BUFSIZ and, if requested, passes the first thus-read buffer to magic_buffer(). If that succeeds, the Mime-Version and Content-Type headers are injected into the outgoing e-mail... -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
At 05:02 PM 7/14/2007, Mikhail Teterin wrote: Derek Ragona wrote: = = I'd rather avoid poluting my script with e-mail sending code... = You need to change your script to send the email itself. Thank you, Derek, but -- as I stated already -- I wanted to see, if this can be avoided... Doing so makes it very non-portable. This would make your cron changes needed on any system and version you want to implement this behavior. Since you posted your script, I'll comment on it. First of all, you don't need ksh for anything you are doing in this script. FreeBSD's /bin/sh is enough (we aren't Solaris :-) -- but is 9 times smaller here (amd64). I don't need ksh for the particular sample I gave you, which is pared down from any I use. I posted a simple boilerplate that anyone who reads the list can use. For most things /bin/sh works well, but the overhead of ksh on a modern server is negligible. Now, instead of redirecting each line of output into MAILFILE, then mailing, and removing it, you should be either outputing everything directly into mail: { cat $REPORT_LOG_HEADER echo$MAILFILE echo$MAILFILE echo BR BR $MAILFILE cat $REPORT_LOG_FOOTER } | $MAIL -s the report name $MAILTO This was done as an example. In many cases I have reports generated in html, and simple email the URL of the report. or, if you want to use the temporary file, use exec to redirect into it _once_, instead of _on every line_: exec $MAILFILE cat $REPORT_LOG_HEADER printf \n \nBRBR\n $MAIL -s the report name $MAILTO $MAILFILE $RM $MAILFILE This may look nicer, but is not, because temporary files are nasty, and you need to be sure, that you remove them in case you are interrupted (trapping signals, etc.) I removed the signal handling from my example as I didn't want to add that much complexity. It is trivial to add proper signal handling. I was surprised, one can not redirect into a pipe directly. The following did not work, as I expected, with neither /bin/sh nor /usr/local/bin/ksh93. The following, I thought, would be the same as my first example, only nicer-looking: exec | $MAIL -s the report name $MAILTO cat . But it is not. So you have to chose from one of the first two examples. This is UNIX. Meaning there are many ways to accomplish tasks. Just choose the tools and methods you want. I strive to make cron scripts simple and portable. I support a multitude of servers running different UNIX versions and flavors. -Derek ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can cron e-mail HTML?
Hello! I have a script launched from cron every morning, that gets certain data over the Internet from a remote computer, compares the new data with that from the previous day, and outputs the difference (if any). I'm relying on the fact, that cron e-mails me the output of each job. However, I modified the script recently to produce the output (if any) in HTML, rather than in plain-text format. The HTML arrives by e-mail just as well as plain text used to, but no e-mail program will render it as such, because neither the cron(8), nor the mail(1), which cron uses to send e-mail, creates MIME messages... How can I force the ``Content-Type: text/html'' header without hacking cron's sources? I'd rather avoid poluting my script with e-mail sending code... Maybe, cron should apply file(1)-like logic to the e-mailed content? Thanks for any hints. Yours, -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
Derek Ragona wrote: = = I'd rather avoid poluting my script with e-mail sending code... = You need to change your script to send the email itself. Thank you, Derek, but -- as I stated already -- I wanted to see, if this can be avoided... Since you posted your script, I'll comment on it. First of all, you don't need ksh for anything you are doing in this script. FreeBSD's /bin/sh is enough (we aren't Solaris :-) -- but is 9 times smaller here (amd64). Now, instead of redirecting each line of output into MAILFILE, then mailing, and removing it, you should be either outputing everything directly into mail: { cat $REPORT_LOG_HEADER echo$MAILFILE echo$MAILFILE echo BR BR $MAILFILE cat $REPORT_LOG_FOOTER } | $MAIL -s the report name $MAILTO or, if you want to use the temporary file, use exec to redirect into it _once_, instead of _on every line_: exec $MAILFILE cat $REPORT_LOG_HEADER printf \n \nBRBR\n $MAIL -s the report name $MAILTO $MAILFILE $RM $MAILFILE This may look nicer, but is not, because temporary files are nasty, and you need to be sure, that you remove them in case you are interrupted (trapping signals, etc.) I was surprised, one can not redirect into a pipe directly. The following did not work, as I expected, with neither /bin/sh nor /usr/local/bin/ksh93. The following, I thought, would be the same as my first example, only nicer-looking: exec | $MAIL -s the report name $MAILTO cat . But it is not. So you have to chose from one of the first two examples. Yours, -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
= To accomplish this I have my cron job run a script like this Sorry, I missed the most important part. Your script just uses /usr/bin/mail, the same way cron does. You are not adding anything, not already present in cron -- your script should simply produce output to stdout. Cron will mail all that to the address specified in MAILTO=... part of your crontab automatically. AFAIK, to make the e-mail message treated as a MIME one, the MIME-Version: 1.0 and Content-Type: ... have to be among _headers_. I'm afraid, it is not possible to directly manipulate the message's headers using mail(1), which is why I asked my question in the first place... -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On субота 14 липень 2007, Daniel Bye wrote: = How can I force the ``Content-Type: text/html'' header without hacking = cron's sources? I'd rather avoid poluting my script with e-mail sending = code... = = Alter your script to add the 'Content-Type: text/html' header. No, I'm afraid, doing this will make the quoted text part of the _body_ of the message. = Maybe, cron should apply file(1)-like logic to the e-mailed content? = No, cron doesn't need any knowledge of how to render email. I was not advocating adding such knowledge. My suggestion was to make cron add proper Content-Type, so that the /recepient's e-mail program/ will render the message correctly. My scripts generate HTML, someone else could be generating JPG images (from their web-camera, every morning)... = The script itself doesn't have to send the mail - cron will handle that if = there is any output when it exits, but you /can/ add headers to the message = as you need. = = Just make sure any custom headers come before the empty line delimiter = between headers and body, and most mail readers should do the right thing. The empty line is inserted by cron before any of the job's own output... This method will not work, unless the e-mail reader (incorrectly) acts upon parts of the body as if they were headers... Thanks! Yours, -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
Mikhail Teterin wrote: Hello! I have a script launched from cron every morning, that gets certain data over the Internet from a remote computer, compares the new data with that from the previous day, and outputs the difference (if any). I'm relying on the fact, that cron e-mails me the output of each job. However, I modified the script recently to produce the output (if any) in HTML, rather than in plain-text format. The HTML arrives by e-mail just as well as plain text used to, but no e-mail program will render it as such, because neither the cron(8), nor the mail(1), which cron uses to send e-mail, creates MIME messages... How can I force the ``Content-Type: text/html'' header without hacking cron's sources? I'd rather avoid poluting my script with e-mail sending code... Alter your script to add the 'Content-Type: text/html' header. Maybe, cron should apply file(1)-like logic to the e-mailed content? No, cron doesn't need any knowledge of how to render email. Make sure the output of your script includes the Content-Type header, which your mail reader will spot and act upon accordingly. The script itself doesn't have to send the mail - cron will handle that if there is any output when it exits, but you /can/ add headers to the message as you need. Just make sure any custom headers come before the empty line delimiter between headers and body, and most mail readers should do the right thing. HTH Dan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
Mikhail Teterin wrote: = Alter your script to add the 'Content-Type: text/html' header. No, I'm afraid, doing this will make the quoted text part of the _body_ of the message. Ack. Yes, you're quite right. Sorry for the bum advice. = Maybe, cron should apply file(1)-like logic to the e-mailed content? = No, cron doesn't need any knowledge of how to render email. I was not advocating adding such knowledge. My suggestion was to make cron add proper Content-Type, so that the /recepient's e-mail program/ will render the message correctly. My scripts generate HTML, someone else could be generating JPG images (from their web-camera, every morning)... Hmm, an interesting idea. Now I understand what you meant, that is. = The script itself doesn't have to send the mail - cron will handle that if = there is any output when it exits, but you /can/ add headers to the message = as you need. = = Just make sure any custom headers come before the empty line delimiter = between headers and body, and most mail readers should do the right thing. The empty line is inserted by cron before any of the job's own output... This method will not work, unless the e-mail reader (incorrectly) acts upon parts of the body as if they were headers... Yep, absolutely right. Got my wrong brain on today! So it's beginning to look as if your best bet is in fact to make your script handle sending the mail, and to only have cron itself mail anything that is the result of an error arising from your script. Not the cleanest solution, but one that will get your messages formatted exactly how you want them. Cheers, Dan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can cron e-mail HTML?
On субота 14 липень 2007, Daniel Bye wrote: = So it's beginning to look as if your best bet is in fact to make your = script handle sending the mail. Yeah, seems like it... = Not the cleanest solution, but one that will get your messages formatted = exactly how you want them. Well, I started looking into how much effort would it be to translate the strings returned by libmagic(3)'s routines into Content-Type. If it is easy enough, I could hack cron to analyze the job's output using magic_buffer(3) and set Content-Type if anything recognizable is detected... The translation is the difficult part :-( Instead of the standardized text/html for example, libmagic returns: HTML document text It is trying to be human-readable, while I need the machine-readable strings. There is stuff on-line that does the translation, but it is in much higher-level languages (like PHP), which think, hash-tables are free :-) Oh, well... -mi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Erroneous delivery of list e-mail (was Re: adding keyboard after reboot with no keyboard )
Steven Johnson wrote: Hello, I am receiving your email because of a screw-up in Gmail. I have no recourse but to mark your email as spam and delete it. Gmail has been unresponsive in correcting the problem. [EMAIL PROTECTED] Hi, Steven It *might* be a screwup in GMail. However, I have circumstantial evidence that suggests it may be otherwise. I hate to bother you, but, in the interest of several people who may be affected, could you send the full source of an e-mail you received from the FreeBSD list directly to me, and not to the list? Also, if you have some convincing evidence that it's GMail, are we allowed to know about it? I'd like everyone to note that I'm merely curious; this is the fourth person in 24 hours to say why in the world am I getting these e-mails? or please unsubscribe me, including 2 G-mail users, an AIM.com/AOL user, and one who's at/near Abacus America/Aplus in San Diego. I'm copying postmaster@ as well, although I doubt it's his problem, but maybe a heads up would be a Good Thing(tm). My best guess so far is a messed-up forwarding rule or alias/virtuser somewhere (and it's a big, big world), or an malicious or incompetent person with an axe to grind. To those of you who are receiving these messages, perhaps Mr. Johnson's recourse is currently your best option. Also, please note that I am simply an interested individual, and do not represent the FreeBSD Project, G-Mail, AOL/AIM, Abacus/A+, the Teamsters/AFL/CIO, CIA/NSA, KGB, Zdnet, , Yahoo!, Pravda, New York Times, etc., etc. Kevin Kinsey -- If you want to put yourself on the map, publish your own map. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to handle forthcoming PR originator e-mail address
Hello! I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Sincerely, Dmitry -- Atlantis ISP, System Administrator e-mail: [EMAIL PROTECTED] nic-hdl: LYNX-RIPE ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to handle forthcoming PR originator e-mail address
wait till it changes then post an update to the pr using the webinterface Ted - Original Message - From: Dmitry Pryanishnikov [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Sent: Thursday, March 29, 2007 4:45 AM Subject: How to handle forthcoming PR originator e-mail address Hello! I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Sincerely, Dmitry -- Atlantis ISP, System Administrator e-mail: [EMAIL PROTECTED] nic-hdl: LYNX-RIPE ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to handle forthcoming PR originator e-mail address
Dmitry Pryanishnikov schrieb: Hello! I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Sincerely, Dmitry Hello Dmitry, if the new address works now, you can send it to us. I can modify the headers of those open PRs, so that you receive any further feedback on that. Regards, Gabor ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to handle forthcoming PR originator e-mail address
On 2007-03-29 15:45, Dmitry Pryanishnikov [EMAIL PROTECTED] wrote: Hello! I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Point me to the PRs and I will use pr-edit to fix the email address. This can also be done by any FreeBSD committer with ssh access to the FreeBSD cluster. - Giorgos pgpXCIi86875x.pgp Description: PGP signature
Re: How to handle forthcoming PR originator e-mail address
Hello! On Thu, 29 Mar 2007, Giorgos Keramidas wrote: I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Point me to the PRs and I will use pr-edit to fix the email address. Thank you, Gabor Kovesdan has already done it. This can also be done by any FreeBSD committer with ssh access to the FreeBSD cluster. I just thought that some kind of automatic tool should exist to accomplish originator's e-mail change. After all, people _do_ change their e-mails sometimes... - Giorgos Sincerely, Dmitry -- Atlantis ISP, System Administrator e-mail: [EMAIL PROTECTED] nic-hdl: LYNX-RIPE ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to handle forthcoming PR originator e-mail address
On 2007-03-29 23:40, Dmitry Pryanishnikov [EMAIL PROTECTED] wrote: On Thu, 29 Mar 2007, Giorgos Keramidas wrote: I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Point me to the PRs and I will use pr-edit to fix the email address. Thank you, Gabor Kovesdan has already done it. Nice. This can also be done by any FreeBSD committer with ssh access to the FreeBSD cluster. I just thought that some kind of automatic tool should exist to accomplish originator's e-mail change. After all, people _do_ change their e-mails sometimes... Not really. Gnats is very flexible in this; it allows manual editing of the bug report itself. This is also one of its relatively annoying 'flaws' though. Care must be taken when bug reports are manually modified by a committer, and there are not very many tools to automake stuff like what you wanted to do. Anyway, I'm glad this has been resolved now :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to handle forthcoming PR originator e-mail address
On Thursday 29 March 2007 23:22:28 Giorgos Keramidas wrote: On 2007-03-29 23:40, Dmitry Pryanishnikov [EMAIL PROTECTED] wrote: On Thu, 29 Mar 2007, Giorgos Keramidas wrote: I'm an originator of 4 open PRs and 9 closed ones. My e-mail address will change soon. How should I handle the change to stay reachable for people working on PRs? Sorry to bother the list with (seems-to-be) a trivial question, I can't find reply in PR-related articles. Point me to the PRs and I will use pr-edit to fix the email address. Thank you, Gabor Kovesdan has already done it. Nice. This can also be done by any FreeBSD committer with ssh access to the FreeBSD cluster. I just thought that some kind of automatic tool should exist to accomplish originator's e-mail change. After all, people _do_ change their e-mails sometimes... Not really. Gnats is very flexible in this; it allows manual editing of the bug report itself. This is also one of its relatively annoying 'flaws' though. Care must be taken when bug reports are manually modified by a committer, and there are not very many tools to automake Also by a submitter. I recently learnt this: Never steep so low as to try and modify the (attached) patch rather than rolling a new PR, pasting in the same old text, etc. However tempting when you are PR'ing a series of 20 or so. But it will always bite you in the butt at some point! Dan stuff like what you wanted to do. Anyway, I'm glad this has been resolved now :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
CI INVESTMENTS' e-mail policy - Action Taken
The attachment(s) from the following e-mail was removed due to CI Investments' e-mail policy. From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Thu, 15 Mar 2007 23:40:18 -0500 Subject: STATUS The following violations were detected: --- Scan information follows --- Virus Name: [EMAIL PROTECTED] File Attachment: [EMAIL PROTECTED] Attachment Status: deleted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
e-mail recusado
O e-mail abaixo indicado foi bloqueado pelo servidor da LightComm, por conter um anexo executável ou constante da nossa lista de exclusões. Arquivos executáveis são potencialmente perigosos por constituir meio de propagação de vírus e worms de e-mail. O conteúdo foi DESCARTADO e tanto o remetente como o destinatário foram informados do ocorrido. The following e-mail was blocked by this server because it contains an executable attachment. Executable files are potentially dangerous, as they are used for e-mail virus and worms propagation. Mail headers: Date : Tue, 12 Dec 2006 09:20:49 +0100 Subject: Mail Delivery (failure [EMAIL PROTECTED]) From : [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] Received : from lightcomm.com.br (198.Red-213-96-252.staticIP.rima-tde.net [213.96.252.198]) To (system): edlight To (header): [EMAIL PROTECTED] Cc : Bcc: Executables: message.scr Mensagem automática - automatic message Porque meu e-mail foi bloqueado ?: http://www.raspppoe.com.br/antivirus.htm ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to create an e-mail
On Fri, Nov 10, 2006 at 07:57:09AM +0200, Luke Lamla wrote: Can you please assist me I am using FreeBSD for my e-mail and internet. I want to create e-mail using super user (root) for my employees. What should I do or which steps should I follow to do that. I will appreciate your support immediately. FreeBSD uses the mailer 'sendmail' by default. You can check the FreeBSD handbook and 'man sendmail' for information about this. You can send mail from the command line by using echo 'msg' | mail -s subject [EMAIL PROTECTED] [EMAIL PROTECTED]' or use a mailer like Mutt. -- Alex Please copy the original recipients, otherwise I may not read your reply. Howtos based on my personal use, including information about setting up a firewall and creating traffic graphs with MRTG http://alex.kruijff.org/FreeBSD/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to create an e-mail
On Fri, Nov 10, 2006 at 07:57:09AM +0200, Luke Lamla wrote: Can you please assist me I am using FreeBSD for my e-mail and internet. I want to create e-mail using super user (root) for my employees. What should I do or which steps should I follow to do that. I will appreciate your support immediately. Well, FreeBSD comes with sendmail. you really dunt have to do much, you can start with FreeBSD and sendmail as its, if you want to create real unix users then just use it as its, all what you need to do is #adduser and add your users! :) simple as this! For clients access, either they access using pop3 service or webinterface, Install qpopper from ports for pop3 access, as for the webmail i recommend www.openwebmail.org Ofcourse there is much deep things to look at _if you want_ but not a must as postfix, qmail, also, you need very litl changes to /etc/mail configuration files. Best of luck Marwan Sultan. _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to create an e-mail
Can you please assist me I am using FreeBSD for my e-mail and internet. I want to create e-mail using super user (root) for my employees. What should I do or which steps should I follow to do that. I will appreciate your support immediately. Kind Regards Lamla Lonwabo Luke Intsika Yethu Municipality mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.ecprov.gov.za/intsikayethulm www.ecprov.gov.za/intsikayethulm tel(w) : 047 874 0704 fax(w): 086 514 9236 cell: 083 535 1972 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: E- MAIL TICKET NUMBER 212005600545188 YOU ARE A WINNER!!!
Wilfred Alberto (Lottery Director) wrote: INTERNATIONAL PROMOTION/PRIZE AWARD DEPT. CALLE GRANVIA 32N 1C MADRID SPAIN REF: RSSL/61-ILGI0509/45 BATCH:RSSL/15/096/WRCS DATE:20/09/2006 Dear Winner, AWARD NOTIFICATION FINAL NOTICE This is to inform you of the release of the Royal Spainish Sweepstake Lottery Email Promotional Program held on the 7st September 2006, this result was initially delayed due to mix up of email addresses, the results were finally released on the 18th September 2006, and your e-mail attached to Ticket number: 212005600545 188 with Serial number: 4888/02, which drew the Lucky numbers: 41-6-76-13-45-8, which consequently won the lottery in the Second category of the year 2006. You are therefore approved. for a lump sum payout of 1,000,000.00 (ONE MILLION EUROS ONLY) in cash accredited to file reference number: KPC/908008/03 this is from a total cash prize of 19,000,000.00 (NINTEEN MILLION EUROS ONLY) Shared among the nineteen international winners in this category. Your fund is now deposited in a security company with your prize money insured in your e-mail.Due to mix up of some email addresses, we ask that you keep this award from public notice until your claim has been processed and money remitted to your account as this is part of our security protocol to avoid double claiming or unwarranted abuse of this program by participants as it has happened in the past. All participants were selected randomly from World Wide Web site through computer draw system and extracted from over 100,000 companies,this promotion takes place annually. We hope your lucky email address will draw a bigger cash prize in the next high stake promotion agenda of 30,000,000.00 (THIRTY MILLION EUROS) To begin your lottery claim, please contact your claim agent, AGRO CONSULTANCY AND SECURITIES S.L. MADRID SPAIN DR.RICHARD ANTONIO ( Remittance/foreign operations manager) Tel:+34-619-693-930 Email:[EMAIL PROTECTED] For due processing and remittance of your winning prize money to designated account of your choice. Remember, all prize money must be claimed. (not later than 15st October 2006. After this date, this fund will be returned to the MINISTERIO DE ECONOMIA Y HACIENDA as unclaimed fund. NOTE: In order to avoid unnecessary delay and complication, please remember to quote your reference and batch numbers in every correspondence with your agent or us. Furthermore, should there be any change of your contact email address, do inform your claim agent as soon as possible. Congratulation once again from all members of our staff and thank you for being part of our International promotion program. We wish you continued good fortunes. Yours Sincerely, Wilfred Alberto (Lottery Director) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] just incase anyones tempted http://www.hoax-slayer.com/royal-spanish-sweepstake-lottery.html -- *Alistair Prestidge* TECHNICAL CONSULTANT Global Media (UK) 3rd Floor Maclaren House Talbot Road Manchester M32 0FP T +44 (0) 161 249 F +44 (0) 161 877 1050 [EMAIL PROTECTED] www.globalmedia-webmarketing.com globalmedia webmarketing http://www.globalmedia-webmarketing.com/emailnews/mailredirect.php?img=1lang=uk globalmedia webmarketing http://www.globalmedia-webmarketing.com/emailnews/mailredirect.php?img=2lang=uk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD as a kiosk system for reading/writing e-mail
Hello, Does someone has an idea about this: - login as user 'kiosk' into FreeBSD and getting a desktop in (for example KDE); - launch a graphical MUA (for example Kmail, or a browser) which supports more than one identity, let's say [EMAIL PROTECTED], [EMAIL PROTECTED] and so on, and each user must somehow authenticate itself for the usage of its identity, at least by typing in the password for this identity; - the MUA is fetching by POP3 or IMAP the mail from some host or the underlaying FreeBSD, but they don't get mixed-up with the mails of the other identities in the folders of the MUA; The background idea is just to use the desktop, i.e. loged in once, as a kiosk for reading/writing mails of a group of people. Thx matthias -- Matthias Apitz Manager Technical Support - OCLC PICA GmbH Gruenwalder Weg 28g - 82041 Oberhaching - Germany t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e [EMAIL PROTECTED] - w http://www.oclcpica.org/ http://guru.UnixLand.de/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD as a kiosk system for reading/writing e-mail
- login as user 'kiosk' into FreeBSD and getting a desktop in (for example KDE); - launch a graphical MUA (for example Kmail, or a browser) which supports more than one identity, let's say [EMAIL PROTECTED], [EMAIL PROTECTED] and so on, and each user must somehow authenticate itself for the usage of its identity, at least by typing in the password for this identity; - the MUA is fetching by POP3 or IMAP the mail from some host or the underlaying FreeBSD, but they don't get mixed-up with the mails of the other identities in the folders of the MUA; The background idea is just to use the desktop, i.e. loged in once, as a kiosk for reading/writing mails of a group of people. It could likely be made to work, but offhand it sounds like reinventing the wheel. Why not just let each user log in via xdm, and have their .xsession bring up the MUA? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: FreeBSD as a kiosk system for reading/writing e-mail
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Why not set up a webmail interface, and lock down your favorite web browser as a kiosk? I've set up several kiosks using firefox and R-kiosk on top of FreeBSD for patrons at a local library. They have access to browse web pages and nothing more. You could even go so far as to edit the hosts file, use a proxy, or put them behind a firewall to restrict what sites they can visit (i.e. your webmail interface). cmh - -- Christopher M. Hobbs IS Technician, City of Siloam Springs [EMAIL PROTECTED], (479).524.5136 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFDv105D6v/aN2SK8RAt/6AKClgJBFEEzNrpQh5GSOrK2E8eNVIwCg6G80 xfh4t7Ml55YHVci8ILK0h24= =gX2+ -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD as a kiosk system for reading/writing e-mail
El día Monday, September 18, 2006 a las 11:53:29AM -0700, Perry Hutchison escribió: It could likely be made to work, but offhand it sounds like reinventing the wheel. Why not just let each user log in via xdm, and have their .xsession bring up the MUA? Because the (mail-) users coming and leaving frecuently and launching each time a own KDE desktop take to much time. Thx for your feedback anyway. I came up with the idea to have one neutral user, say 'kiosk' which owns the desktop and the others say $ ssh -X [EMAIL PROTECTED] kmail 2/dev/null via small icons for 'user1', 'user2', ... matthias -- Matthias Apitz Manager Technical Support - OCLC PICA GmbH Gruenwalder Weg 28g - 82041 Oberhaching - Germany t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e [EMAIL PROTECTED] - w http://www.oclcpica.org/ http://guru.UnixLand.de/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]