Re: letter (KOMA-Script v.2) Space between closing and signature...........
Le 25/02/2013 07:48, Charlie a écrit :
On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
Re: letter (KOMA-Script v.2) Space between closing and
signature
A picture being worth a thousand words, Figure 6.1 in the
scrguien.pdf is your friend.
My reply follows:
Hello Jean-Marie,
I have seen that diagram but again don't know how to work it. The
different first commands like:
\@addtoplength
or
\@setplength or whatever.
Hi Charlie,
First, as my own copy of the guide is quite old (my figure 6.1 is now
17.1), I updated it now from the last one dated 2012-05-15 which is here:
http://www.komascript.de/files/scrguien.pdf
So the page numbers I'm using now refer to this last version of the guide.
How does one understand these commands? How does one know which to use
where?
Read section 4.2 Pseudo-Lengths (page 135). With my words:
All these pseudo-lengths have a default value. If you want to change
this default value and make it completly different you use \@setplength.
If you want to slightly modify it, you use \@addtoplength.
I have attached the diagram you sent and added the commands that you
have helped me with in green and red.
I have also tried to make the signature on my letter template come to
the left of the page with these commands, none of which work:
\@setplength{sigindent}{\raggedleft} without success [...]
And many more, to numerous to mention here, but never the right one.
\@setplength{sigindent}{0mm}
will place the box containing the signature on the left side but this is
already defined in the DIN.lco
It's probably worthwhile to make your own version of the DIN.lco that
you are using. Copy it under a new name (myDIN.lco f.ex.) in the
directory where you have your lyx letters and modify it as you wish:
Instead of using
\@addtoplength{firstheadvpos}{1cm}
after calling the original DIN.lco where this plength is set, you can
replace inside your new lco the
\@setplength{firstheadvpos}{8mm}
by
\@setplength{firstheadvpos}{18mm}
Don't forget to call your lco file in the preamble:
\LoadLetterOption{myDIN}%
To place the signature inside the closing box on the left you have to
change in your lco file
\let\raggedsignature=\centering
to
\let\raggedsignature=\raggedright
HTH
--
Jean-Marie
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Mon, 25 Feb 2013 11:58:04 +0100 Jean-Marie Pacquet j...@pacquet.net
sent this:
Le 25/02/2013 07:48, Charlie a écrit :
On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
Re: letter (KOMA-Script v.2) Space between closing and
signature
A picture being worth a thousand words, Figure 6.1 in the
scrguien.pdf is your friend.
My reply follows:
Hello Jean-Marie,
I have seen that diagram but again don't know how to work it.
The different first commands like:
\@addtoplength
or
\@setplength or whatever.
Hi Charlie,
First, as my own copy of the guide is quite old (my figure 6.1 is now
17.1), I updated it now from the last one dated 2012-05-15 which is
here: http://www.komascript.de/files/scrguien.pdf
So the page numbers I'm using now refer to this last version of the
guide.
How does one understand these commands? How does one know which to
use where?
Read section 4.2 Pseudo-Lengths (page 135). With my words:
All these pseudo-lengths have a default value. If you want to change
this default value and make it completly different you use
\@setplength. If you want to slightly modify it, you use
\@addtoplength.
I have attached the diagram you sent and added the commands that you
have helped me with in green and red.
I have also tried to make the signature on my letter template come to
the left of the page with these commands, none of which work:
\@setplength{sigindent}{\raggedleft} without success [...]
And many more, to numerous to mention here, but never the right one.
\@setplength{sigindent}{0mm}
will place the box containing the signature on the left side but this
is already defined in the DIN.lco
It's probably worthwhile to make your own version of the DIN.lco that
you are using. Copy it under a new name (myDIN.lco f.ex.) in the
directory where you have your lyx letters and modify it as you wish:
Instead of using
\@addtoplength{firstheadvpos}{1cm}
after calling the original DIN.lco where this plength is set, you can
replace inside your new lco the
\@setplength{firstheadvpos}{8mm}
by
\@setplength{firstheadvpos}{18mm}
Don't forget to call your lco file in the preamble:
\LoadLetterOption{myDIN}%
To place the signature inside the closing box on the left you have to
change in your lco file
\let\raggedsignature=\centering
to
\let\raggedsignature=\raggedright
HTH
--
Jean-Marie
Your explanation and guidance has been extremely helpful Jean-Marie.
I took your advice and tweaked the DIN.lco file and placed it in my
templates directory and added the absolute path to it in my preamble.
Again, thank you for your time and this enormous assistance.
Be well,
Charlie
--
Registered Linux User:- 329524
***
I do not know how to distinguish between our waking life and a
dream. Are we not always living the life that we imagine we
are? .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: letter (KOMA-Script v.2) Space between closing and signature...........
Le 25/02/2013 07:48, Charlie a écrit :
On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
Re: letter (KOMA-Script v.2) Space between closing and
signature
A picture being worth a thousand words, Figure 6.1 in the
scrguien.pdf is your friend.
My reply follows:
Hello Jean-Marie,
I have seen that diagram but again don't know how to work it. The
different first commands like:
\@addtoplength
or
\@setplength or whatever.
Hi Charlie,
First, as my own copy of the guide is quite old (my figure 6.1 is now
17.1), I updated it now from the last one dated 2012-05-15 which is here:
http://www.komascript.de/files/scrguien.pdf
So the page numbers I'm using now refer to this last version of the guide.
How does one understand these commands? How does one know which to use
where?
Read section 4.2 Pseudo-Lengths (page 135). With my words:
All these pseudo-lengths have a default value. If you want to change
this default value and make it completly different you use \@setplength.
If you want to slightly modify it, you use \@addtoplength.
I have attached the diagram you sent and added the commands that you
have helped me with in green and red.
I have also tried to make the signature on my letter template come to
the left of the page with these commands, none of which work:
\@setplength{sigindent}{\raggedleft} without success [...]
And many more, to numerous to mention here, but never the right one.
\@setplength{sigindent}{0mm}
will place the box containing the signature on the left side but this is
already defined in the DIN.lco
It's probably worthwhile to make your own version of the DIN.lco that
you are using. Copy it under a new name (myDIN.lco f.ex.) in the
directory where you have your lyx letters and modify it as you wish:
Instead of using
\@addtoplength{firstheadvpos}{1cm}
after calling the original DIN.lco where this plength is set, you can
replace inside your new lco the
\@setplength{firstheadvpos}{8mm}
by
\@setplength{firstheadvpos}{18mm}
Don't forget to call your lco file in the preamble:
\LoadLetterOption{myDIN}%
To place the signature inside the closing box on the left you have to
change in your lco file
\let\raggedsignature=\centering
to
\let\raggedsignature=\raggedright
HTH
--
Jean-Marie
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Mon, 25 Feb 2013 11:58:04 +0100 Jean-Marie Pacquet j...@pacquet.net
sent this:
Le 25/02/2013 07:48, Charlie a écrit :
On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
Re: letter (KOMA-Script v.2) Space between closing and
signature
A picture being worth a thousand words, Figure 6.1 in the
scrguien.pdf is your friend.
My reply follows:
Hello Jean-Marie,
I have seen that diagram but again don't know how to work it.
The different first commands like:
\@addtoplength
or
\@setplength or whatever.
Hi Charlie,
First, as my own copy of the guide is quite old (my figure 6.1 is now
17.1), I updated it now from the last one dated 2012-05-15 which is
here: http://www.komascript.de/files/scrguien.pdf
So the page numbers I'm using now refer to this last version of the
guide.
How does one understand these commands? How does one know which to
use where?
Read section 4.2 Pseudo-Lengths (page 135). With my words:
All these pseudo-lengths have a default value. If you want to change
this default value and make it completly different you use
\@setplength. If you want to slightly modify it, you use
\@addtoplength.
I have attached the diagram you sent and added the commands that you
have helped me with in green and red.
I have also tried to make the signature on my letter template come to
the left of the page with these commands, none of which work:
\@setplength{sigindent}{\raggedleft} without success [...]
And many more, to numerous to mention here, but never the right one.
\@setplength{sigindent}{0mm}
will place the box containing the signature on the left side but this
is already defined in the DIN.lco
It's probably worthwhile to make your own version of the DIN.lco that
you are using. Copy it under a new name (myDIN.lco f.ex.) in the
directory where you have your lyx letters and modify it as you wish:
Instead of using
\@addtoplength{firstheadvpos}{1cm}
after calling the original DIN.lco where this plength is set, you can
replace inside your new lco the
\@setplength{firstheadvpos}{8mm}
by
\@setplength{firstheadvpos}{18mm}
Don't forget to call your lco file in the preamble:
\LoadLetterOption{myDIN}%
To place the signature inside the closing box on the left you have to
change in your lco file
\let\raggedsignature=\centering
to
\let\raggedsignature=\raggedright
HTH
--
Jean-Marie
Your explanation and guidance has been extremely helpful Jean-Marie.
I took your advice and tweaked the DIN.lco file and placed it in my
templates directory and added the absolute path to it in my preamble.
Again, thank you for your time and this enormous assistance.
Be well,
Charlie
--
Registered Linux User:- 329524
***
I do not know how to distinguish between our waking life and a
dream. Are we not always living the life that we imagine we
are? .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: letter (KOMA-Script v.2) Space between closing and signature...........
Le 25/02/2013 07:48, Charlie a écrit :
On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
Re: letter (KOMA-Script v.2) Space between closing and
signature
A picture being worth a thousand words, Figure 6.1 in the
scrguien.pdf is your friend.
My reply follows:
Hello Jean-Marie,
I have seen that diagram but again don't know how to work it. The
different first commands like:
\@addtoplength
or
\@setplength or whatever.
Hi Charlie,
First, as my own copy of the guide is quite old (my figure 6.1 is now
17.1), I updated it now from the last one dated 2012-05-15 which is here:
http://www.komascript.de/files/scrguien.pdf
So the page numbers I'm using now refer to this last version of the guide.
How does one understand these commands? How does one know which to use
where?
Read section 4.2 Pseudo-Lengths (page 135). With my words:
All these pseudo-lengths have a default value. If you want to change
this default value and make it completly different you use \@setplength.
If you want to slightly modify it, you use \@addtoplength.
I have attached the diagram you sent and added the commands that you
have helped me with in green and red.
I have also tried to make the signature on my letter template come to
the left of the page with these commands, none of which work:
\@setplength{sigindent}{\raggedleft} without success [...]
And many more, to numerous to mention here, but never the right one.
\@setplength{sigindent}{0mm}
will place the box containing the signature on the left side but this is
already defined in the DIN.lco
It's probably worthwhile to make your own version of the DIN.lco that
you are using. Copy it under a new name (myDIN.lco f.ex.) in the
directory where you have your lyx letters and modify it as you wish:
Instead of using
\@addtoplength{firstheadvpos}{1cm}
after calling the original DIN.lco where this plength is set, you can
replace inside your new lco the
\@setplength{firstheadvpos}{8mm}
by
\@setplength{firstheadvpos}{18mm}
Don't forget to call your lco file in the preamble:
\LoadLetterOption{myDIN}%
To place the signature inside the closing box on the left you have to
change in your lco file
\let\raggedsignature=\centering
to
\let\raggedsignature=\raggedright
HTH
--
Jean-Marie
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Mon, 25 Feb 2013 11:58:04 +0100 "Jean-Marie Pacquet j...@pacquet.net"
sent this:
>Le 25/02/2013 07:48, Charlie a écrit :
>>On Sun, 24 Feb 2013 15:39:05 +0100 Jean-Marie mentioned this:
>> Re: letter (KOMA-Script v.2) Space between closing and
>>signature
>>
>>> A picture being worth a thousand words, Figure 6.1 in the
>>> scrguien.pdf is your friend.
>>My reply follows:
>>
>> Hello Jean-Marie,
>>
>>I have seen that diagram but again don't know how to work it.
>> The different first commands like:
>>
>> \@addtoplength
>> or
>> \@setplength or whatever.
>Hi Charlie,
>
>First, as my own copy of the guide is quite old (my figure 6.1 is now
>17.1), I updated it now from the last one dated 2012-05-15 which is
> here: http://www.komascript.de/files/scrguien.pdf
>
>So the page numbers I'm using now refer to this last version of the
> guide.
>>
>>
>> How does one understand these commands? How does one know which to
>> use where?
>
>Read section 4.2 Pseudo-Lengths (page 135). With my words:
>All these pseudo-lengths have a default value. If you want to change
>this default value and make it completly different you use
> \@setplength. If you want to slightly modify it, you use
> \@addtoplength.
>
>>
>> I have attached the diagram you sent and added the commands that you
>> have helped me with in green and red.
>>
>> I have also tried to make the signature on my letter template come to
>> the left of the page with these commands, none of which work:
>>
>> \@setplength{sigindent}{\raggedleft} without success [...]
>> And many more, to numerous to mention here, but never the right one.
>
>\@setplength{sigindent}{0mm}
>will place the box containing the signature on the left side but this
> is already defined in the DIN.lco
>
>It's probably worthwhile to make your own version of the DIN.lco that
>you are using. Copy it under a new name (myDIN.lco f.ex.) in the
>directory where you have your lyx letters and modify it as you wish:
>
>Instead of using
>\@addtoplength{firstheadvpos}{1cm}
>after calling the original DIN.lco where this plength is set, you can
>replace inside your new lco the
>\@setplength{firstheadvpos}{8mm}
>by
>\@setplength{firstheadvpos}{18mm}
>
>
>Don't forget to call your lco file in the preamble:
>
>\LoadLetterOption{myDIN}%
>
>
>
>To place the signature inside the closing box on the left you have to
>change in your lco file
> \let\raggedsignature=\centering
>to
>\let\raggedsignature=\raggedright
>
>HTH
>--
>Jean-Marie
Your explanation and guidance has been extremely helpful Jean-Marie.
I took your advice and tweaked the DIN.lco file and placed it in my
templates directory and added the absolute path to it in my preamble.
Again, thank you for your time and this enormous assistance.
Be well,
Charlie
--
Registered Linux User:- 329524
***
I do not know how to distinguish between our waking life and a
dream. Are we not always living the life that we imagine we
are? .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Sun, 24 Feb 2013 08:42:49 +0100 Jean-Marie Pacquet j...@pacquet.net
sent this:
Le 24/02/2013 07:26, Charlie a écrit :
I'm having a problem with the space between Closing and Signature in:
letter (KOMA-Script v.2)
using LyX version 2.0.3 Debian Wheezy.
I need more space to apply my hand written signature. [...]
From the user guide (scrguien.pdf):
Between closing phrase and signature a vertical space is inserted. The
height
of this space is defined in the pseudo-length sigbeforevskip. It
defaults to 2 lines. In this space you can write your
inscription.
% position from top of page of Sender Name thanks to: Jean-Marie
Pacquet \@addtoplength{firstheadvpos}{1cm}
\@addtoplength{firstfootvpos}{-1cm}
This seems to be the right place ;-) to add this line:
\@setplength{sigbeforevskip}{2\baselineskip}
Change the 2 to whatever suits you
Cheers
--
Jean-Marie
Thank you Jean-Marie,
You have helped me once again. I have two copies of the scrguien.pdf
and I use the latest. Read it, but obviously I don't know how to
use it. How to put the commands together in some instances.
I read this: sigbeforevskip vertical skip between closing and signature
(section 6.6.1, page 207)
But didn't really understand it.
Even tried working with this:
\setkomavar{signature}{John McEnvy\\{\small (Vice-President ‘‘The Other
Society’’)}}
\closing{Regards\\(for the board of directors)}
But couldn't put it together to rectify my problem, then searched the
net again and couldn't come up with the right answer.
Thank you again, because you have solved my problem once more, and you
will know it's much appreciated.
Be well,
Charlie
--
Registered Linux User:- 329524
***
The light which puts out our eyes is darkness to us. Only that
day dawns to which we are awake. There is more day to dawn. The
sun is but a morning star. - Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Sun, 24 Feb 2013 08:42:49 +0100 Jean-Marie Pacquet j...@pacquet.net
sent this:
Le 24/02/2013 07:26, Charlie a écrit :
I'm having a problem with the space between Closing and Signature in:
letter (KOMA-Script v.2)
using LyX version 2.0.3 Debian Wheezy.
I need more space to apply my hand written signature. [...]
From the user guide (scrguien.pdf):
Between closing phrase and signature a vertical space is inserted. The
height
of this space is defined in the pseudo-length sigbeforevskip. It
defaults to 2 lines. In this space you can write your
inscription.
% position from top of page of Sender Name thanks to: Jean-Marie
Pacquet \@addtoplength{firstheadvpos}{1cm}
\@addtoplength{firstfootvpos}{-1cm}
This seems to be the right place ;-) to add this line:
\@setplength{sigbeforevskip}{2\baselineskip}
Change the 2 to whatever suits you
Cheers
--
Jean-Marie
Thank you Jean-Marie,
You have helped me once again. I have two copies of the scrguien.pdf
and I use the latest. Read it, but obviously I don't know how to
use it. How to put the commands together in some instances.
I read this: sigbeforevskip vertical skip between closing and signature
(section 6.6.1, page 207)
But didn't really understand it.
Even tried working with this:
\setkomavar{signature}{John McEnvy\\{\small (Vice-President ‘‘The Other
Society’’)}}
\closing{Regards\\(for the board of directors)}
But couldn't put it together to rectify my problem, then searched the
net again and couldn't come up with the right answer.
Thank you again, because you have solved my problem once more, and you
will know it's much appreciated.
Be well,
Charlie
--
Registered Linux User:- 329524
***
The light which puts out our eyes is darkness to us. Only that
day dawns to which we are awake. There is more day to dawn. The
sun is but a morning star. - Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: letter (KOMA-Script v.2) Space between closing and signature...........
On Sun, 24 Feb 2013 08:42:49 +0100 "Jean-Marie Pacquet j...@pacquet.net"
sent this:
>Le 24/02/2013 07:26, Charlie a écrit :
>> I'm having a problem with the space between Closing and Signature in:
>>
>> letter (KOMA-Script v.2)
>>
>> using LyX version 2.0.3 Debian Wheezy.
>>
>> I need more space to apply my hand written signature. [...]
> From the user guide (scrguien.pdf):
>Between closing phrase and signature a vertical space is inserted. The
>height
>of this space is defined in the pseudo-length sigbeforevskip. It
> defaults to 2 lines. In this space you can write your
> inscription.
>>
>>
>> % position from top of page of Sender Name thanks to: Jean-Marie
>> Pacquet \@addtoplength{firstheadvpos}{1cm}
>> \@addtoplength{firstfootvpos}{-1cm}
>This seems to be the right place ;-) to add this line:
>\@setplength{sigbeforevskip}{2\baselineskip}
>
>Change the 2 to whatever suits you
>
>Cheers
>--
>Jean-Marie
Thank you Jean-Marie,
You have helped me once again. I have two copies of the scrguien.pdf
and I use the latest. Read it, but obviously I don't know how to
use it. How to put the commands together in some instances.
I read this: sigbeforevskip vertical skip between closing and signature
(section 6.6.1, page 207)
But didn't really understand it.
Even tried working with this:
\setkomavar{signature}{John McEnvy\\{\small (Vice-President ‘‘The Other
Society’’)}}
\closing{Regards\\(for the board of directors)}
But couldn't put it together to rectify my problem, then searched the
net again and couldn't come up with the right answer.
Thank you again, because you have solved my problem once more, and you
will know it's much appreciated.
Be well,
Charlie
--
Registered Linux User:- 329524
***
The light which puts out our eyes is darkness to us. Only that
day dawns to which we are awake. There is more day to dawn. The
sun is but a morning star. - Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
letter (KOMA-Script v.2) Space between closing and signature...........
I'm having a problem with the space between Closing and Signature in:
letter (KOMA-Script v.2)
using LyX version 2.0.3 Debian Wheezy.
I need more space to apply my hand written signature.
The document class doesn't honour vertical space after Closing.
It doesn't honour vertical space before Signature.
I have been googling this through Latex and LyX and nothing is either
working or making any sense when I read the text?
My preamble looks like this:
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\@addtoplength{toaddrvpos}{1cm}
% space between ref line and letter text
\@setplength{refaftervskip}{5mm}
% position from top of page of Sender Name thanks to: Jean-Marie Pacquet
\@addtoplength{firstheadvpos}{1cm}
\@addtoplength{firstfootvpos}{-1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
%%,headsepline=false%separate the header with a line on
page 1
%,footsepline=true% separate the footer with a line on page 1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu)
,fromalign=center%alignment of the address
,fromrule=aftername%separate the address with a line?
%,fromphone=true% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=true% print sender e-mail address
%%,fromurl=true% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
\setkomavar{backaddressseparator}{ $\cdot$ }
%\setkomavar{emailseparator}{ -- }
%\setkomavar{enclseparator}{ }
%\setkomavar{faxseparator}{ -- }
%\setkomavar{phoneseparator}{ -- }
%\setkomavar{subjectseparator}{ }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\scshape}
%\setkomafont{pagefoot}{}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
\usepackage[bottom=-3.5cm, textwidth=360pt]{geometry}
So have to come back to the list for this.
Can someone tell me how this is done.
Thank you,
Charlie
--
Registered Linux User:- 329524
***
It is usually the imagination that is wounded first, rather
than the heart; it being much more sensitive. .Henry David
Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
letter (KOMA-Script v.2) Space between closing and signature...........
I'm having a problem with the space between Closing and Signature in:
letter (KOMA-Script v.2)
using LyX version 2.0.3 Debian Wheezy.
I need more space to apply my hand written signature.
The document class doesn't honour vertical space after Closing.
It doesn't honour vertical space before Signature.
I have been googling this through Latex and LyX and nothing is either
working or making any sense when I read the text?
My preamble looks like this:
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\@addtoplength{toaddrvpos}{1cm}
% space between ref line and letter text
\@setplength{refaftervskip}{5mm}
% position from top of page of Sender Name thanks to: Jean-Marie Pacquet
\@addtoplength{firstheadvpos}{1cm}
\@addtoplength{firstfootvpos}{-1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
%%,headsepline=false%separate the header with a line on
page 1
%,footsepline=true% separate the footer with a line on page 1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu)
,fromalign=center%alignment of the address
,fromrule=aftername%separate the address with a line?
%,fromphone=true% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=true% print sender e-mail address
%%,fromurl=true% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
\setkomavar{backaddressseparator}{ $\cdot$ }
%\setkomavar{emailseparator}{ -- }
%\setkomavar{enclseparator}{ }
%\setkomavar{faxseparator}{ -- }
%\setkomavar{phoneseparator}{ -- }
%\setkomavar{subjectseparator}{ }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\scshape}
%\setkomafont{pagefoot}{}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
\usepackage[bottom=-3.5cm, textwidth=360pt]{geometry}
So have to come back to the list for this.
Can someone tell me how this is done.
Thank you,
Charlie
--
Registered Linux User:- 329524
***
It is usually the imagination that is wounded first, rather
than the heart; it being much more sensitive. .Henry David
Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
letter (KOMA-Script v.2) Space between closing and signature...........
I'm having a problem with the space between Closing and Signature in:
letter (KOMA-Script v.2)
using LyX version 2.0.3 Debian Wheezy.
I need more space to apply my hand written signature.
The document class doesn't honour vertical space after Closing.
It doesn't honour vertical space before Signature.
I have been googling this through Latex and LyX and nothing is either
working or making any sense when I read the text?
My preamble looks like this:
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\@addtoplength{toaddrvpos}{1cm}
% space between ref line and letter text
\@setplength{refaftervskip}{5mm}
% position from top of page of Sender Name thanks to: Jean-Marie Pacquet
\@addtoplength{firstheadvpos}{1cm}
\@addtoplength{firstfootvpos}{-1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
%%,headsepline=false%separate the header with a line on
page >1
%,footsepline=true% separate the footer with a line on page >1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu)
,fromalign=center%alignment of the address
,fromrule=aftername%separate the address with a line?
%,fromphone=true% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=true% print sender e-mail address
%%,fromurl=true% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
\setkomavar{backaddressseparator}{ $\cdot$ }
%\setkomavar{emailseparator}{ --> }
%\setkomavar{enclseparator}{ > }
%\setkomavar{faxseparator}{ --> }
%\setkomavar{phoneseparator}{ --> }
%\setkomavar{subjectseparator}{ >>> }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\scshape}
%\setkomafont{pagefoot}{}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
\usepackage[bottom=-3.5cm, textwidth=360pt]{geometry}
So have to come back to the list for this.
Can someone tell me how this is done.
Thank you,
Charlie
--
Registered Linux User:- 329524
***
It is usually the imagination that is wounded first, rather
than the heart; it being much more sensitive. .Henry David
Thoreau
***
Debian GNU/Linux - just the best way to create magic
-
Re: change subject alignment in letter koma-script v.2
Le 14/02/2010 22:49, Giovanni Bacci a écrit : domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: Default subject (i.e. beforeopening and untitled) is left justified. Only the title (if selected) is centered. This can be seen on figure 6.1: Schematic of letter paper's pseudo lengths. So I don't really understand your request: do you want the title to be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening You are right and I don't know how to change that within Lyx. The Latex gurus may have a solution. -- jmp
Re: change subject alignment in letter koma-script v.2
Le 14/02/2010 22:49, Giovanni Bacci a écrit : domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: Default subject (i.e. beforeopening and untitled) is left justified. Only the title (if selected) is centered. This can be seen on figure 6.1: Schematic of letter paper's pseudo lengths. So I don't really understand your request: do you want the title to be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening You are right and I don't know how to change that within Lyx. The Latex gurus may have a solution. -- jmp
Re: change subject alignment in letter koma-script v.2
Le 14/02/2010 22:49, Giovanni Bacci a écrit : domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: Default subject (i.e. beforeopening and untitled) is left justified. Only the title (if selected) is centered. This can be seen on figure 6.1: Schematic of letter paper's pseudo lengths. So I don't really understand your request: do you want the title to be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening You are right and I don't know how to change that within Lyx. The Latex gurus may have a solution. -- jmp
change subject alignment in letter koma-script v.2
Hi list. I've a problem non strictly about lyx, but i hope to get an
answer, maybe useful for other lyxer too.
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Thanks,
Giovanni
Re: change subject alignment in letter koma-script v.2
Giovanni Bacci a écrit :
[...]
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Default subject (i.e. beforeopening and untitled) is left justified.
Only the title (if selected) is centered. This can be seen on figure
6.1: Schematic of letter paper's pseudo lengths.
So I don't really understand your request: do you want the title to be
left justified?
--
jmp
Re: change subject alignment in letter koma-script v.2
domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: Default subject (i.e. beforeopening and untitled) is left justified. Only the title (if selected) is centered. This can be seen on figure 6.1: Schematic of letter paper's pseudo lengths. So I don't really understand your request: do you want the title to be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening Thanks, Giovanni newfile1.pdf Description: Adobe PDF document
change subject alignment in letter koma-script v.2
Hi list. I've a problem non strictly about lyx, but i hope to get an
answer, maybe useful for other lyxer too.
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Thanks,
Giovanni
Re: change subject alignment in letter koma-script v.2
Giovanni Bacci a écrit :
[...]
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Default subject (i.e. beforeopening and untitled) is left justified.
Only the title (if selected) is centered. This can be seen on figure
6.1: Schematic of letter paper's pseudo lengths.
So I don't really understand your request: do you want the title to be
left justified?
--
jmp
Re: change subject alignment in letter koma-script v.2
domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: Default subject (i.e. beforeopening and untitled) is left justified. Only the title (if selected) is centered. This can be seen on figure 6.1: Schematic of letter paper's pseudo lengths. So I don't really understand your request: do you want the title to be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening Thanks, Giovanni newfile1.pdf Description: Adobe PDF document
change subject alignment in letter koma-script v.2
Hi list. I've a problem non strictly about lyx, but i hope to get an
answer, maybe useful for other lyxer too.
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Thanks,
Giovanni
Re: change subject alignment in letter koma-script v.2
Giovanni Bacci a écrit :
[...]
Anyway, I'd like to know if it's possible to change subject alignment
in a letter koma-script v.2 class. As an option i can only choose
{before,after}opening and titled/untitled. Both of them came with
a center aligned text. But what i'd like to obtain is a left justified
alignment. I've googled a bit, but without finding any clue.
Any hints?
Default subject (i.e. beforeopening and untitled) is left justified.
Only the title (if selected) is centered. This can be seen on figure
6.1: Schematic of letter paper's pseudo lengths.
So I don't really understand your request: do you want the title to be
left justified?
--
jmp
Re: change subject alignment in letter koma-script v.2
domenica 14 febbraio 2010, 22:26, Jean-Marie Pacquet: > Default subject (i.e. beforeopening and untitled) is left justified. > Only the title (if selected) is centered. This can be seen on figure > 6.1: Schematic of letter paper's pseudo lengths. > So I don't really understand your request: do you want the title to > be left justified? I've attached an example. As you can see, setting subject=afteropening cause the object to be centered in the page. What i'd like to have is a left-aligned subject line, exactly as it's with subject=beforeopening Thanks, Giovanni newfile1.pdf Description: Adobe PDF document
Re: Letter [KOMA - Script-v.2............
On Tue, 19 Jan 2010 08:21:23 +0100 Jean-Marie Pacquet j...@pacquet.net
shared this with is all on the Lyx users list:
M-L a écrit :
[...]
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I
am looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
If you look at the manual scrguien.pdf everything you need is visible
in figure 6.1: Schematic of letter paper's pseudo lengths. The
pseudo length for Sender Name vertical position is called
firstheadvpos. To adjust it you can add in the preamble:
\...@addtoplength{firstheadvpos}{2cm}
You can also create your own lco parameter file (derived from the
DIN.lco you are using) to suit your needs.
HTH
--
jmp
Thank you very much for that pointer and information. I have the
scrguien.pdf on my hard drive and I will look through it.
Many thanks once again.
Be well,
Charlie
--
Registered Linux User:- 329524
***
This world Is but A fleeting dream So why be alarmed At its
evanescence? ___Ikkyu (1394-1481)
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Tue, 19 Jan 2010 08:21:23 +0100 Jean-Marie Pacquet j...@pacquet.net
shared this with is all on the Lyx users list:
M-L a écrit :
[...]
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I
am looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
If you look at the manual scrguien.pdf everything you need is visible
in figure 6.1: Schematic of letter paper's pseudo lengths. The
pseudo length for Sender Name vertical position is called
firstheadvpos. To adjust it you can add in the preamble:
\...@addtoplength{firstheadvpos}{2cm}
You can also create your own lco parameter file (derived from the
DIN.lco you are using) to suit your needs.
HTH
--
jmp
Thank you very much for that pointer and information. I have the
scrguien.pdf on my hard drive and I will look through it.
Many thanks once again.
Be well,
Charlie
--
Registered Linux User:- 329524
***
This world Is but A fleeting dream So why be alarmed At its
evanescence? ___Ikkyu (1394-1481)
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Tue, 19 Jan 2010 08:21:23 +0100 Jean-Marie Pacquet <j...@pacquet.net>
shared this with is all on the Lyx users list:
>M-L a écrit :
>> [...]
>> I must be on the wrong track then, and my apologies to Jean-Marie and
>> yourself.
>>
>> It is the "Sender Name" that has my name and address so obviously I
>> am looking at the wrong thing?
>>
>> So renew my question:
>>
>> Debian Testing [Squeeze] Using LyX Version 1.6.5
>>
>> Letter [KOMA - Script-v.2]
>>
>> Which of the commands below affect the "Sender Name" field
>>
>If you look at the manual scrguien.pdf everything you need is visible
>in figure 6.1: "Schematic of letter paper's pseudo lengths". The
>pseudo length for Sender Name vertical position is called
>"firstheadvpos". To adjust it you can add in the preamble:
>
>\...@addtoplength{firstheadvpos}{2cm}
>
>You can also create your own "lco" parameter file (derived from the
>DIN.lco you are using) to suit your needs.
>
>HTH
>--
>jmp
Thank you very much for that pointer and information. I have the
scrguien.pdf on my hard drive and I will look through it.
Many thanks once again.
Be well,
Charlie
--
Registered Linux User:- 329524
***
This world Is but A fleeting dream So why be alarmed At its
evanescence? ___Ikkyu (1394-1481)
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:28:06 +0100 Jean-Marie Pacquet j...@pacquet.net
shared this with is all on the Lyx users list:
M-L a écrit :
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
May be I don't understand the question, but to add a bit more space
above the address you only need to change the value 2mm (which is
precisely the measure of the vertical space added to the predefined
address position) to what you want it to be (2cm):
\...@addtoplength{toaddrvpos}{2cm}
HTH
--
jmp
Thank you Jean-Marie,
But what that does is add space below the address field in my
experimentation up to 21cm.
Just tried it again to be certain and am not giving you false
information.
Thank you for your reply.
Be well,
Charlie
--
Registered Linux User:- 329524
***
Our truest life is when we are in our dreams
awake. ...Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:37:12 +0100 Jürgen Spitzmüller sp...@lyx.org
shared this with is all on the Lyx users list:
M-L wrote:
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
I'm not sure I understand your question. Doesn't
changing the mentioned declaration (to e.g.
\...@addtoplength{toaddrvpos}{22mm}) do what you want?
Jürgen
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
%
%% Here you can modify the layout of your letter
%% Have a look at the KOMA script documentation
%% for details. Most commands are commented out
%% here (i.e. we use default settings)
%
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
% space between ref line and letter text
\...@setplength{refaftervskip}{1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
,headsepline=false%separate the header with a line on page
1 ,footsepline=false% separate the footer with a line on
page 1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu) ,fromalign=left%alignment of the address
,fromrule=aftername%separate the address with a line?
,fromphone=false% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=false% print sender e-mail address
,fromurl=false% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
%\setkomavar{backaddressseparator}{ $\cdot$ }
\setkomavar{emailseparator}{}
%\setkomavar{enclseparator}{ }
%\setkomavar{faxseparator}{ -- }
%\setkomavar{phoneseparator}{ -- }
%\setkomavar{subjectseparator}{ }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
%\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\bf}
%\setkomafont{pagefoot}{utopia}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
Creating a larger space above the Sender Name does not work by using
-Document Settings-Page Margins
Apologies for any confusion. Thanks in advance,
Charlie
--
Registered Linux User:- 329524
***
Learn to wish that everything should come to pass exactly as it does.
_Epictetus
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
[...]
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
If you look at the manual scrguien.pdf everything you need is visible in
figure 6.1: Schematic of letter paper's pseudo lengths. The pseudo
length for Sender Name vertical position is called firstheadvpos. To
adjust it you can add in the preamble:
\...@addtoplength{firstheadvpos}{2cm}
You can also create your own lco parameter file (derived from the
DIN.lco you are using) to suit your needs.
HTH
--
jmp
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:28:06 +0100 Jean-Marie Pacquet j...@pacquet.net
shared this with is all on the Lyx users list:
M-L a écrit :
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
May be I don't understand the question, but to add a bit more space
above the address you only need to change the value 2mm (which is
precisely the measure of the vertical space added to the predefined
address position) to what you want it to be (2cm):
\...@addtoplength{toaddrvpos}{2cm}
HTH
--
jmp
Thank you Jean-Marie,
But what that does is add space below the address field in my
experimentation up to 21cm.
Just tried it again to be certain and am not giving you false
information.
Thank you for your reply.
Be well,
Charlie
--
Registered Linux User:- 329524
***
Our truest life is when we are in our dreams
awake. ...Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:37:12 +0100 Jürgen Spitzmüller sp...@lyx.org
shared this with is all on the Lyx users list:
M-L wrote:
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
I'm not sure I understand your question. Doesn't
changing the mentioned declaration (to e.g.
\...@addtoplength{toaddrvpos}{22mm}) do what you want?
Jürgen
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
%
%% Here you can modify the layout of your letter
%% Have a look at the KOMA script documentation
%% for details. Most commands are commented out
%% here (i.e. we use default settings)
%
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
% space between ref line and letter text
\...@setplength{refaftervskip}{1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
,headsepline=false%separate the header with a line on page
1 ,footsepline=false% separate the footer with a line on
page 1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu) ,fromalign=left%alignment of the address
,fromrule=aftername%separate the address with a line?
,fromphone=false% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=false% print sender e-mail address
,fromurl=false% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
%\setkomavar{backaddressseparator}{ $\cdot$ }
\setkomavar{emailseparator}{}
%\setkomavar{enclseparator}{ }
%\setkomavar{faxseparator}{ -- }
%\setkomavar{phoneseparator}{ -- }
%\setkomavar{subjectseparator}{ }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
%\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\bf}
%\setkomafont{pagefoot}{utopia}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
Creating a larger space above the Sender Name does not work by using
-Document Settings-Page Margins
Apologies for any confusion. Thanks in advance,
Charlie
--
Registered Linux User:- 329524
***
Learn to wish that everything should come to pass exactly as it does.
_Epictetus
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
[...]
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the Sender Name that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the Sender Name field
If you look at the manual scrguien.pdf everything you need is visible in
figure 6.1: Schematic of letter paper's pseudo lengths. The pseudo
length for Sender Name vertical position is called firstheadvpos. To
adjust it you can add in the preamble:
\...@addtoplength{firstheadvpos}{2cm}
You can also create your own lco parameter file (derived from the
DIN.lco you are using) to suit your needs.
HTH
--
jmp
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:28:06 +0100 Jean-Marie Pacquet <j...@pacquet.net>
shared this with is all on the Lyx users list:
>M-L a écrit :
>> Debian Testing [Squeeze] Using LyX Version 1.6.5
>>
>> Letter [KOMA - Script-v.2]
>>
>> This in my preamble as per the template for that letter style [only
>> the number has changed]:
>>
>> % vertical position of the address field
>> \...@addtoplength{toaddrvpos}{2mm}
>>
>> What command do I add:
>>
>> * preceding that
>> * to that, or
>> * following that
>>
>> To add a bit more space above the address?
>>
>> \vspace*{2cm} in various places and in various ways doesn't cut it.
>>
>> I must be doing something wrong?
>>
>> TIA
>> Charlie
>>
>May be I don't understand the question, but to add a bit more space
>above the address you only need to change the value 2mm (which is
>precisely the measure of the vertical space added to the predefined
>address position) to what you want it to be (2cm):
>
>\...@addtoplength{toaddrvpos}{2cm}
>
>HTH
>--
>jmp
Thank you Jean-Marie,
But what that does is add space "below" the address field in my
experimentation up to 21cm.
Just tried it again to be certain and am not giving you false
information.
Thank you for your reply.
Be well,
Charlie
--
Registered Linux User:- 329524
***
Our truest life is when we are in our dreams
awake. ...Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
On Mon, 18 Jan 2010 08:37:12 +0100 Jürgen Spitzmüller <sp...@lyx.org>
shared this with is all on the Lyx users list:
>M-L wrote:
>> This in my preamble as per the template for that letter style [only
>> the number has changed]:
>>
>> % vertical position of the address field
>> \...@addtoplength{toaddrvpos}{2mm}
>>
>> What command do I add:
>>
>> * preceding that
>> * to that, or
>> * following that
>>
>> To add a bit more space above the address?
>
>I'm not sure I understand your question. Doesn't
>changing the mentioned declaration (to e.g.
>\...@addtoplength{toaddrvpos}{22mm}) do what you want?
>
>Jürgen
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the "Sender Name" that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the "Sender Name" field
%
%% Here you can modify the layout of your letter
%% Have a look at the KOMA script documentation
%% for details. Most commands are commented out
%% here (i.e. we use default settings)
%
%% Load an *.lco style file (see KOMA documentation)
%%\LoadLetterOption{DIN}%
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
% space between ref line and letter text
\...@setplength{refaftervskip}{1cm}
%% THE CLASS OPTIONS
%% Remove preceeding '%' to uncomment an item
\KOMAoptions{%
,headsepline=false%separate the header with a line on page
>1 ,footsepline=false% separate the footer with a line on
>page >1
%pagenumber=botcenter% position of the page number (see docu)
%,parskip=false% Use indent instead of skip (more options cf.
docu) ,fromalign=left%alignment of the address
,fromrule=aftername%separate the address with a line?
,fromphone=false% print sender phone number
%,fromfax=true% print sender fax number
,fromemail=false% print sender e-mail address
,fromurl=false% print sender URL
%,fromlogo=true% print a logo (position depends on fromalign)
%,addrfield=false%print an address field?
%,backaddress=false% print the back address?
%,subject=afteropening,titled% alternative subject layout and position
%,locfield=narrow% width of the (extra) location field
,foldmarks=false% print foldmarks?
%,numericaldate=true% date layout
%,refline=wide% layout of the refline
}
%% Customize Separators
%\setkomavar{placeseparator}{ -- }
%\setkomavar{backaddressseparator}{ $\cdot$ }
\setkomavar{emailseparator}{}
%\setkomavar{enclseparator}{ > }
%\setkomavar{faxseparator}{ --> }
%\setkomavar{phoneseparator}{ --> }
%\setkomavar{subjectseparator}{ >>> }
%% Customize fonts
%% Use LaTeX's standard font commands
%% Modify with \setkomafont or \addtokomafont
%% (see KOMA documentation)
%\setkomafont{backaddress}{\rmfamily}
%\setkomafont{descriptionlabel}{}
\setkomafont{fromaddress}{\small}
\setkomafont{fromname}{\bf}
%\setkomafont{pagefoot}{utopia}
%\setkomafont{pagehead}{}
%\setkomafont{pagenumber}{}
%\setkomafont{subject}{}
%\setkomafont{title}{}
Creating a larger space above the "Sender Name" does not work by using
->Document Settings->Page Margins
Apologies for any confusion. Thanks in advance,
Charlie
--
Registered Linux User:- 329524
***
Learn to wish that everything should come to pass exactly as it does.
_Epictetus
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
[...]
I must be on the wrong track then, and my apologies to Jean-Marie and
yourself.
It is the "Sender Name" that has my name and address so obviously I am
looking at the wrong thing?
So renew my question:
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
Which of the commands below affect the "Sender Name" field
If you look at the manual scrguien.pdf everything you need is visible in
figure 6.1: "Schematic of letter paper's pseudo lengths". The pseudo
length for Sender Name vertical position is called "firstheadvpos". To
adjust it you can add in the preamble:
\...@addtoplength{firstheadvpos}{2cm}
You can also create your own "lco" parameter file (derived from the
DIN.lco you are using) to suit your needs.
HTH
--
jmp
Letter [KOMA - Script-v.2............
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
--
Registered Linux User:- 329524
***
The pleasure we feel in music springs from the obedience which is in
it. .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
May be I don't understand the question, but to add a bit more space
above the address you only need to change the value 2mm (which is
precisely the measure of the vertical space added to the predefined
address position) to what you want it to be (2cm):
\...@addtoplength{toaddrvpos}{2cm}
HTH
--
jmp
Re: Letter [KOMA - Script-v.2............
M-L wrote:
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
I'm not sure I understand your question. Doesn't
changing the mentioned declaration (to e.g.
\...@addtoplength{toaddrvpos}{22mm}) do what you want?
Jürgen
Letter [KOMA - Script-v.2............
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
--
Registered Linux User:- 329524
***
The pleasure we feel in music springs from the obedience which is in
it. .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
May be I don't understand the question, but to add a bit more space
above the address you only need to change the value 2mm (which is
precisely the measure of the vertical space added to the predefined
address position) to what you want it to be (2cm):
\...@addtoplength{toaddrvpos}{2cm}
HTH
--
jmp
Re: Letter [KOMA - Script-v.2............
M-L wrote:
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
I'm not sure I understand your question. Doesn't
changing the mentioned declaration (to e.g.
\...@addtoplength{toaddrvpos}{22mm}) do what you want?
Jürgen
Letter [KOMA - Script-v.2............
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
--
Registered Linux User:- 329524
***
The pleasure we feel in music springs from the obedience which is in
it. .Henry David Thoreau
***
Debian GNU/Linux - just the best way to create magic
___
Re: Letter [KOMA - Script-v.2............
M-L a écrit :
Debian Testing [Squeeze] Using LyX Version 1.6.5
Letter [KOMA - Script-v.2]
This in my preamble as per the template for that letter style [only
the number has changed]:
% vertical position of the address field
\...@addtoplength{toaddrvpos}{2mm}
What command do I add:
* preceding that
* to that, or
* following that
To add a bit more space above the address?
\vspace*{2cm} in various places and in various ways doesn't cut it.
I must be doing something wrong?
TIA
Charlie
May be I don't understand the question, but to add a bit more space
above the address you only need to change the value 2mm (which is
precisely the measure of the vertical space added to the predefined
address position) to what you want it to be (2cm):
\...@addtoplength{toaddrvpos}{2cm}
HTH
--
jmp
Re: Letter [KOMA - Script-v.2............
M-L wrote:
> This in my preamble as per the template for that letter style [only
> the number has changed]:
>
> % vertical position of the address field
> \...@addtoplength{toaddrvpos}{2mm}
>
> What command do I add:
>
> * preceding that
> * to that, or
> * following that
>
> To add a bit more space above the address?
I'm not sure I understand your question. Doesn't
changing the mentioned declaration (to e.g.
\...@addtoplength{toaddrvpos}{22mm}) do what you want?
Jürgen
