Re[2]: [PHP] Re: weird header() (bug may be)
Hello Jason, Thursday, February 12, 2004, 6:38:05 AM, you wrote: It should be this: header(Location: another_page.php); and NOT header(Location:another_page.php); JW Also it should be an absolute URL otherwise it might break on some (standards JW compliant only) browsers: While I totally agree with both these pieces of advice, they're unlikely to be the cause of the problem. YES you should have a space after the Location: part and YES you should have an absolute URL, *but* most modern browsers won't care if you haven't - the following works perfectly on IE6/Opera7/Firefox - no matter how malformed it looks: Header(Location:page2.php); Chris provided the solution to the original problem in his reply, but I just wanted to bring this up. The OP should of course modify his header statements, but its unlikely to resolve his problem on its own. -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: Zlib - Insert files?
Thanks But how can i put it into an tar archive before? rgds Till -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] getting month from date variable
HI, I have looked the php manual and cannot find a function where I can extract the month (in words) from a variable which contains a date. eg: I input : 2004-01-26 and the function must return: January Is there a php function like this? I dont want to reinvent the wheel. If there isnt i will have to write my own. Thanx in advance. Angelo Disclaimer This e-mail transmission contains confidential information, which is the property of the sender. The information in this e-mail or attachments thereto is intended for the attention and use only of the addressee. Should you have received this e-mail in error, please delete and destroy it and any attachments thereto immediately. Under no circumstances will the Cape Technikon or the sender of this e-mail be liable to any party for any direct, indirect, special or other consequential damages for any use of this e-mail. For the detailed e-mail disclaimer please refer to http://www.ctech.ac.za/polic or call +27 (0)21 460 3911 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] getting month from date variable
Don't reinvent http://www.php.net/manual/en/function.strftime.php -Original Message- From: Angelo Zanetti [mailto:[EMAIL PROTECTED] Sent: donderdag 12 februari 2004 10:13 To: [EMAIL PROTECTED] Subject: [PHP] getting month from date variable HI, I have looked the php manual and cannot find a function where I can extract the month (in words) from a variable which contains a date. eg: I input : 2004-01-26 and the function must return: January Is there a php function like this? I dont want to reinvent the wheel. If there isnt i will have to write my own. Thanx in advance. Angelo Disclaimer This e-mail transmission contains confidential information, which is the property of the sender. The information in this e-mail or attachments thereto is intended for the attention and use only of the addressee. Should you have received this e-mail in error, please delete and destroy it and any attachments thereto immediately. Under no circumstances will the Cape Technikon or the sender of this e-mail be liable to any party for any direct, indirect, special or other consequential damages for any use of this e-mail. For the detailed e-mail disclaimer please refer to http://www.ctech.ac.za/polic or call +27 (0)21 460 3911 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] find some application
dear all, i'm new in php programming i would like to find some sample application to increase my knowledge. would you tell me where will i find a sample application or maybe some of you want to sent me anything about php or the sample code thank you best regards -- Poltak Reynold Priyadi Student of PI-DEL Address : Jl Sisingamangaraja, Sitoluama, Laguboti, Tobasa, North Sumatera,Indonesia e-mail : [EMAIL PROTECTED] or [EMAIL PROTECTED] web : http://students.del.ac.id/~if02076 phone : (061) 7871533 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] find some application
How lazy are you ? Just look up PHP on the web, give www.google.com a go - you might just learn something. -Original Message- From: Poltak Reynold Priyadi [mailto:[EMAIL PROTECTED] Sent: 12 February 2004 09:58 To: [EMAIL PROTECTED] Subject: [PHP] find some application dear all, i'm new in php programming i would like to find some sample application to increase my knowledge. would you tell me where will i find a sample application or maybe some of you want to sent me anything about php or the sample code thank you best regards -- Poltak Reynold Priyadi Student of PI-DEL Address : Jl Sisingamangaraja, Sitoluama, Laguboti, Tobasa, North Sumatera,Indonesia e-mail : [EMAIL PROTECTED] or [EMAIL PROTECTED] web : http://students.del.ac.id/~if02076 phone : (061) 7871533 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php This message has been scanned for viruses by MailController - www.MailController.altohiway.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] [Q]PHP not taking input values from forms
On 11 February 2004 18:01, Dan Aloma wrote: Sorry about not including code the first time. Here is a snippet of code I am fairly certain should be doing something. Thank you SOOO much for the help. I've been working on setting up php for four days now and EVERYTHING else works (phpinfo() calls, etc), but for some reason forms, even ones that I know should be working don't take values. They just return you to the same screen. CODE: html body brbr ?=$errormessage? br form action=?=$_SERVER['PHP_SELF']? method=post table width=500 border=0 cellpadding=5 cellspacing=0 tr tdYour name:/td tdinput type=text name=namevalue=?=$_POST['name']?/td /tr tr tdYour email:/td tdinput type=text name=email value=?=$_POST['email']?td tr tr tdYour message:/td tdtextarea name=message?=$_POST['message']?/textarea/td/tr /table input type=hidden name=required value=name,email,message input type=submit name=submit value=submit /body/html H'mmm -- one other thought in addition to all the other good pointers: is short_open_tag On or Off? Because if it's off, none of those ?= snippets will fire anyway. Cheers! Mike - Mike Ford, Electronic Information Services Adviser, Learning Support Services, Learning Information Services, JG125, James Graham Building, Leeds Metropolitan University, Beckett Park, LEEDS, LS6 3QS, United Kingdom Email: [EMAIL PROTECTED] Tel: +44 113 283 2600 extn 4730 Fax: +44 113 283 3211 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Imagejpeg and image size question
Hi, I am new to manipulating JPGs using PHP. But i managed to create an application that displays an JPG image in the browser (see below). I have boiled the code down to the most nesesary. My problem is that when i load the file c:\file.jpg directly in the IE browser (using IMG SRC='c:\file.jpg'), and then get properties on the image by right clicking in the browser. the size is the same as it is on the HD (83Kb). However when i use the PHP code and get properties on the image by right clicking in the browser. the image size is 264Kb. How come the picture is bigger when loaded trough PHP as it is when loaded trough the browser directly ? best regards John -generate_jpg_picture.php starts--- ?php header(Content-type: image/jpeg, true); $path = $_GET['filepath']; $im = imagecreatefromjpeg($path); Imagejpeg($im, '', 100); ImageDestroy($im); ? -generate_jpg_picture.php ends--- -some_file.php starts--- html head titlePHP Test/title /head body IMG SRC='generate_jpg_picture.php?filepath=?php echo urlencode(c:\\file.jpg); ?' IMG SRC='c:\file.jpg' /body /html -some_file.php ends--- -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] find some application
go to www.php.net and www.phpfreaks.com and look at the manual and on the NET!!! -Original Message- From: Poltak Reynold Priyadi [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 11:58 AM To: [EMAIL PROTECTED] Subject: [PHP] find some application dear all, i'm new in php programming i would like to find some sample application to increase my knowledge. would you tell me where will i find a sample application or maybe some of you want to sent me anything about php or the sample code thank you best regards -- Poltak Reynold Priyadi Student of PI-DEL Address : Jl Sisingamangaraja, Sitoluama, Laguboti, Tobasa, North Sumatera,Indonesia e-mail : [EMAIL PROTECTED] or [EMAIL PROTECTED] web : http://students.del.ac.id/~if02076 phone : (061) 7871533 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php Disclaimer This e-mail transmission contains confidential information, which is the property of the sender. The information in this e-mail or attachments thereto is intended for the attention and use only of the addressee. Should you have received this e-mail in error, please delete and destroy it and any attachments thereto immediately. Under no circumstances will the Cape Technikon or the sender of this e-mail be liable to any party for any direct, indirect, special or other consequential damages for any use of this e-mail. For the detailed e-mail disclaimer please refer to http://www.ctech.ac.za/polic or call +27 (0)21 460 3911 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] find some application
Hello Poltak, Thursday, February 12, 2004, 9:58:09 AM, you wrote: PRP i would like to find some sample application to increase my knowledge. PRP would you tell me where will i find a sample application PRP or maybe some of you want to sent me anything about php or the sample code http://www.hotscripts.com and learn to use Google. -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] bar code scaning in intranet ap
Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Unique ID - again
Hi folks, I'm using usual md5(microtime()); to create IDs, but now I've encountered a problem with that. I need to create explicitly 6 digit unique number(decimal). Yes, I know I can use for/while loop to fill a string with digits, but is it ABSOLUTELY sure that the random will never return same number when seed is microtime()? It is very important as the number will identify a bank transfer... Is there any other way than checking with all previous IDs? Or some MySQL function to do this for me? thank you Alex -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Unique ID - again
Hello Alex, Thursday, February 12, 2004, 11:00:41 AM, you wrote: A I'm using usual md5(microtime()); to create IDs, but now I've encountered a A problem with that. I need to create explicitly 6 digit unique A number(decimal). Yes, I know I can use for/while loop to fill a string with A digits, but is it ABSOLUTELY sure that the random will never return same A number when seed is microtime()? It is very important as the number will A identify a bank transfer... If the data is so important - why are you restricting it to a 6 digit key? You should ideally use the uniqid() function perhaps with a combined lcg entropy at the end. That will give you a 13 character long unique id - or md5 it for a 32 character one (see the manual for examples). A Is there any other way than checking with all previous IDs? Or some MySQL A function to do this for me? For something so important I would use (a) a longer unique ID and (b) I'd still run a SQL check to see if the ID has been already used or not. A simple MySQL count will bring that result back very quickly. -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Please help me understand gmmktime()
On 11 February 2004 20:26, Richard Day wrote: Hello: Environment: Linux server PHP 4.3.4 This code: echo 'br'.strftime('%T %Z',mktime()).', Timestamp='.mktime(); echo 'br'.strftime('%T GMT',gmmktime()).', Timestamp='.gmmktime(); yields this result: 23:52:08 EST, Timestamp=1076475128 18:52:08 GMT, Timestamp=1076457128 Why? GMT should be 5 hours ahead of EST, not 5 behind. Right? What am I missing here?? Well, that looks very suspicious, and probably not for the reasons you're thinking. I can explain why you get that result, but it means that either (a) there's a bug in gmmktime(), or (b) the documentation for gmmktime() is wrong (or, at least, misleading). So, let's take it step-by-step: 1. gmmktime(), according to the manual, should use the current corresponding GMT value for it's omitted arguments. 2. In my book, at 23:52:08 EST that means it should be using 04:52:08 GMT on the following day (we'll discuss this later, since, whilst giving a different result, it still wouldn't produce what you're expecting!). 3. However, let's guess that gmmktime() is actually using the *local* time value of 23:52:08, but treating it as if it were GMT. 4. In which case, you'll get a timestamp for 23:52:08 GMT. 5. Because timestamps are absolute (not adjusted for timezone), this is also the timestamp for 18:52:08 EST. 6. 18:52:08 is what you're getting printed. 7. QED. This behaviour is *not* what the manual says should happen, and in my opinion is counter-intuitive. However, if gmmktime() were to behave as the manual, at least how I read it, suggests, this is what would happen: 1. gmmktime() would calculate a timestamp for 04:52:08 GMT (next day). 2. Because timestamps are absolute, this is also the timestamp for 23:52:08 EST. 3. So strftime() still outputs 23:52:08. Ergo, this is not the way to produce an adjusted time. One way to do what you're looking for is to feed the same timestamp to date('%H:%i:%s') and gmdate('%H:%i:%s). If you want something you can feed to strftime() for the GMT date, you need to acquire your timezone's offset from GMT in seconds (e.g. with date('Z');) and subtract that from the timestamp. HTH Cheers! Mike - Mike Ford, Electronic Information Services Adviser, Learning Support Services, Learning Information Services, JG125, James Graham Building, Leeds Metropolitan University, Beckett Park, LEEDS, LS6 3QS, United Kingdom Email: [EMAIL PROTECTED] Tel: +44 113 283 2600 extn 4730 Fax: +44 113 283 3211 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re[2]: [PHP] weird header() (bug may be)
Hello Chris, Thursday, February 12, 2004, 5:57:55 PM, you wrote: CS Nope. As others have pointed out, your Location header is improperly CS formed. CS However, your immediate problem is that, regardless of whether $foo == CS 'something', you *always* set the Location header to to_previous_page.php. CS So, even if you set it to to_another_page.php previously, you're CS overwriting it. CS Hope that helps. CS Chris CS = CS Chris Shiflett - http://shiflett.org/ CS PHP Security - O'Reilly CS Coming mid-2004 CS HTTP Developer's Handbook - Sams CS http://httphandbook.org/ CS PHP Community Site CS http://phpcommunity.org/ -- ok guys ... thanks for your answer and my another question -- why the php didnt stop processing after sending the header ? -- because in my logic ... after sending the (redirect) to another -- page .. the process shall be stopped and thanks for your -- advise ... I just know that I have to write location: with space -- ... I am get used to do that for almost 1 year :) -- Best regards, adwinwijayamailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re[3]: [PHP] weird header() (bug may be)
Hello adwinwijaya, Thursday, February 12, 2004, 11:11:48 AM, you wrote: -- because in my logic ... after sending the (redirect) to another -- page .. the process shall be stopped In PHP's logic however, it doesn't stop :) (Unless you tell it to by either using an exit() call or just making the header function the last line of your script). -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] mutliple select form not passing multiple values
On 11 February 2004 21:39, Ben Ramsey wrote: Ah-ha! I missed that, and I always do. Let's hope I don't anymore. While we're on the subject, why is PHP set up this way? Why can't it just add the elements to the array automatically, since adding the square brackets to one's HTML form name is not a standard practice? Well, then you would get the tradeoff that you have to test whether the value supplied is a simple scalar (because only one option was checked) or an array, before you could work with it. IIRC, that's what you do in perl and ASP. PHP takes the attitude that the code should be as simple as possible, and therefore it's the FORM's responsibility to indicate where POSTed values should be treated as arrays. Personally, I think I could live with having to write code such as $checkboxes = (array)$checkboxes, but this is a choice the PHP implementers have taken, and I don't see it changing in the foreseeable future. Cheers! Mike - Mike Ford, Electronic Information Services Adviser, Learning Support Services, Learning Information Services, JG125, James Graham Building, Leeds Metropolitan University, Beckett Park, LEEDS, LS6 3QS, United Kingdom Email: [EMAIL PROTECTED] Tel: +44 113 283 2600 extn 4730 Fax: +44 113 283 3211 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] bar code scaning in intranet ap
Programming bar code reader from PHP? It truly largely depends on the brand of bar code reader, and even then, the model. For example, I programed for an Intermec Antares 24xx series handheld (that model is made for standalone/independant operation). For your operations, this isn't very good model (not counting expensive). Bar code readers work in serveral possible ways... 1. RF/networked (more advanced models) 2. serial port, where the reader streams what has been read in 3. keyboard port, and when it reads a bar code, it sends the proper characters back to the computer. I'd recommend baseing your design on models where the computer can have a driver that does direct translation and the bar code reader acts like a keyboard. Then you just have to make a standard webapp, and your text input fields are populated by the values that are read in from the bar codes. I don't have any links off the top of my head to help you get a better foundation in this, but google must have plenty ;) To visit a company that works in bar code equipement, find Intermec's website. HTH, Andrew Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Running Apache in one machine and php in another
On 06/02/2004 at 11:55 Mrs. Geeta Thanu wrote: This is in addition to my previous mail. I feel the PHP script and the C program should be in one machine and apache in another. When a user click the link the php script should upload a form get the input and show the result. So apache should support running PHP in another machine.Is it possible. It's possible. The easiest way to do this is: # On the webserver, you just need Apache, with a redirection setup. So if a user entered http://webserver/genome-processing/ then it'll be redirected to http://application-server/genome-processing/ Example (put these in httpd.conf): IfModule mod_proxy.c ProxyPass /genome-processing/ http://application-server/genome-processing/ ProxyPassReverse /genome-processing/ http://application-server/genome-processing/ /IfModule # On the application server, you'll need Apache+PHP and that C program. genome-processing/index.php in this box should process all user input, and then execute the C program with system() function: http://uk.php.net/manual/en/function.system.php # Ensure that the output from the C program can be easily parsed in PHP, or better yet, already HTML-tagged properly so you don't need to process it any further in your PHP script - just printf() the whole of its output straightaway. There are other ways to do this, but as I said I think this is the easiest way. CMIIW of course. regards, -HS On Fri, 6 Feb 2004, Jason Wong wrote: On Saturday 07 February 2004 02:57, Mrs. Geeta Thanu wrote: I have configured Apache webserver executing PHP scripts on sun machine and everything is working fine. Now I want the web server to pass on the PHP executions to another machine and once done should get the result and display it. Is it possible . -- Kampanye open-source Indonesia - http://www.DariWindowsKeLinux.com Solusi canggih, bebas ikatan, dan bebas biaya v0sw6Chw5ln3ck4u6Lw5-2Tl6+8Ds5MRr5e7t2Tb8TOp2/3en5+7g5HC - hackerkey.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Call to a member function on a non-object
HI, I used my scripts yesterday and suddenly today they dont work and I get this error: Call to a member function on a non-object it points to erroneous line that calls a function in 1 of my classes. The class and this particular file have not been changed since i used them yest. I also checked my DB and all is perfect. I read somewhere on the net that it could have something to do with cache. But i couldnt find any helpful info. perhaps someone has experienced this error before and what could cause it and how do i fix it? thanx in advance Angelo Disclaimer This e-mail transmission contains confidential information, which is the property of the sender. The information in this e-mail or attachments thereto is intended for the attention and use only of the addressee. Should you have received this e-mail in error, please delete and destroy it and any attachments thereto immediately. Under no circumstances will the Cape Technikon or the sender of this e-mail be liable to any party for any direct, indirect, special or other consequential damages for any use of this e-mail. For the detailed e-mail disclaimer please refer to http://www.ctech.ac.za/polic or call +27 (0)21 460 3911 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re[2]: [PHP] Re: weird header() (bug may be)
Hello Eric, Thursday, February 12, 2004, 10:57:57 PM, you wrote: EB That's pretty wierd EB Think i'll do some research on headers, need more info anyway ;) EB But did my tip work in your script when you took a space there? EB Just wondering... EB Eric No it still doesnt work ... I have to put die() or exit() after calling the header(); and whether I put space and not using space .. the result still same .. ( I am get used not to use space for almost 1 year .. and suddenly I just know that I should put space :) ) In my logic, after we call header('location: foo.php'); the php processor should terminated and open the page foo.php instead ... cmmiw -- Best regards, adwinwijayamailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re[3]: [PHP] Re: weird header() (bug may be)
Hello adwinwijaya, Thursday, February 12, 2004, 12:27:07 PM, you wrote: a In my logic, after we call header('location: foo.php'); the php a processor should terminated and open the page foo.php instead ... Except that doesn't happen. See my other reply on this subject. -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] weird header() (bug may be)
adwinwijaya wrote: -- ok guys ... thanks for your answer and my another question -- why the php didnt stop processing after sending the header ? -- because in my logic ... after sending the (redirect) to another -- page .. the process shall be stopped and thanks for your -- advise ... I just know that I have to write location: with space -- ... I am get used to do that for almost 1 year :) You might still want to do some processing after the redirect header. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Call to a member function on a non-object
Hello Angelo, Thursday, February 12, 2004, 12:33:39 PM, you wrote: AZ I used my scripts yesterday and suddenly today they dont work and I get this AZ error: Call to a member function on a non-object If you have changed *nothing* at all that could influence the outcome of this script then I would suggest you just upload your original files again and over-write what is on the server. It's possible they have been corrupted somehow. Failing that it's time to start debugging - if you use a decent IDE like Zend then start slapping breakpoints and watches all over the place. If you don't, start echo'ing out values left right and centre as you enter key parts of your script. -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Call to a member function on a non-object
Hello Angelo, Thursday, February 12, 2004, 11:33:39 PM, you wrote: AZ HI, AZ I used my scripts yesterday and suddenly today they dont work and I get this AZ error: Call to a member function on a non-object AZ it points to erroneous line that calls a function in 1 of my classes. The AZ class and this particular file have not been changed since i used them yest. AZ I also checked my DB and all is perfect. I read somewhere on the net that it AZ could have something to do with cache. But i couldnt find any helpful info. AZ perhaps someone has experienced this error before and what could cause it AZ and how do i fix it? AZ thanx in advance AZ Angelo -- may be you have to check whether you have already include the file -- or not .. sometimes, include_once (or require_once) could lead to -- this error .. so try to use include or require .. hope it work :) -- Best regards, adwinwijayamailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: weird header() (bug may be)
On 12 Feb 2004 at 17:20, adwinwijaya wrote: Hello php-generaler's , I have a script like this : if($foo == 'something'){ header('Location:to_another_page.php') ; }else { do another thing in here } header('Location:to_previous_page.php'); I got a problem ... when $foo == 'something' .. it wont redirect me to to_another_page.php but if I put die(); after calling header(); .. it will work ... is this the bug ? You're joking, right? Your second header statement is outside the if/else loop, so it's executed every time, obviously. This in turn means that your script will always redirect to previous_page.php, unless, of course, you kill it before it gets to the second header statement. Suggestion: read up on control structures (chapter 11 in the PHP manual). -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] {ot help needed} mod_auth_mysql
Does anyone here use mod_auth_mysql for authentication? I am STFW like crazy, but I cannot find a solution for connecting to another mysql server on the network. TVMIA! -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: form array
On 12 Feb 2004 at 0:29, Matthew Oatham wrote: I have a form on page1 that i want to submit to another php page - page2 the form has the fields input type=hidden name=image[one] value=one input type=hidden name=image[two] value=two input type=hidden name=image[three] value=three Basically I want to have these form field values as an array of values I can loop through on page 2 but what do I put on page 2 too get the array and loop through ? On page two you'll have $_POST['image'] as an array containing elements 'one', 'two' and 'three' ($_POST['image']['one'] etc). This is *pretty* basic, so I'm guessing you'll have to learn some more PHP before you can actually do anything with this array. If you have some experience with other programming languages, you'll probably find that the first few chapters of the official PHP manual (http://www.php.net/manual/en/ ) will get you up and running in no time flat. Good luck, Erik -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] weird header() (bug may be)
adwinwijaya wrote: Hello php-generaler's , I have a script like this : if($foo == 'something'){ header('Location:to_another_page.php') ; }else { do another thing in here } header('Location:to_previous_page.php'); I got a problem ... when $foo == 'something' .. it wont redirect me to to_another_page.php but if I put die(); after calling header(); .. it will work ... is this the bug ? I use php 4.3.4 ... and Apache 2.x thanks Another thing you need to know, header checks if the same header was output before, if yes, it is owerwriten by the second one. So if you write: header('Location: foo.php'); header('Location: bar.php'); only one header is output. You can pass false as the second parameter to header (replace parameter), in this case both headers are output. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] bar code scaning in intranet ap
Great idea. Can I use a keyboard and bar code scanner together? How to use a keyboard, if i connect a scanner into a keyboard port? Michal Andrew Séguin [EMAIL PROTECTED] píse v diskusním príspevku news:[EMAIL PROTECTED] Programming bar code reader from PHP? It truly largely depends on the brand of bar code reader, and even then, the model. For example, I programed for an Intermec Antares 24xx series handheld (that model is made for standalone/independant operation). For your operations, this isn't very good model (not counting expensive). Bar code readers work in serveral possible ways... 1. RF/networked (more advanced models) 2. serial port, where the reader streams what has been read in 3. keyboard port, and when it reads a bar code, it sends the proper characters back to the computer. I'd recommend baseing your design on models where the computer can have a driver that does direct translation and the bar code reader acts like a keyboard. Then you just have to make a standard webapp, and your text input fields are populated by the values that are read in from the bar codes. I don't have any links off the top of my head to help you get a better foundation in this, but google must have plenty ;) To visit a company that works in bar code equipement, find Intermec's website. HTH, Andrew Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] bar code scaning in intranet ap
Great idea. Can I use a keyboard and bar code scanner together? How to use a keyboard, if i connect a scanner into a keyboard port? Michal Andrew Séguin [EMAIL PROTECTED] píse v diskusním príspevku news:[EMAIL PROTECTED] Programming bar code reader from PHP? It truly largely depends on the brand of bar code reader, and even then, the model. For example, I programed for an Intermec Antares 24xx series handheld (that model is made for standalone/independant operation). For your operations, this isn't very good model (not counting expensive). Bar code readers work in serveral possible ways... 1. RF/networked (more advanced models) 2. serial port, where the reader streams what has been read in 3. keyboard port, and when it reads a bar code, it sends the proper characters back to the computer. I'd recommend baseing your design on models where the computer can have a driver that does direct translation and the bar code reader acts like a keyboard. Then you just have to make a standard webapp, and your text input fields are populated by the values that are read in from the bar codes. I don't have any links off the top of my head to help you get a better foundation in this, but google must have plenty ;) To visit a company that works in bar code equipement, find Intermec's website. HTH, Andrew Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] bar code scaning in intranet ap
Great idea. Can I use a keyboard and bar code scanner together? How to use a keyboard, if i connect a scanner into a keyboard port? Michal Andrew Séguin [EMAIL PROTECTED] píse v diskusním príspevku news:[EMAIL PROTECTED] Programming bar code reader from PHP? It truly largely depends on the brand of bar code reader, and even then, the model. For example, I programed for an Intermec Antares 24xx series handheld (that model is made for standalone/independant operation). For your operations, this isn't very good model (not counting expensive). Bar code readers work in serveral possible ways... 1. RF/networked (more advanced models) 2. serial port, where the reader streams what has been read in 3. keyboard port, and when it reads a bar code, it sends the proper characters back to the computer. I'd recommend baseing your design on models where the computer can have a driver that does direct translation and the bar code reader acts like a keyboard. Then you just have to make a standard webapp, and your text input fields are populated by the values that are read in from the bar codes. I don't have any links off the top of my head to help you get a better foundation in this, but google must have plenty ;) To visit a company that works in bar code equipement, find Intermec's website. HTH, Andrew Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: bar code scaning in intranet ap
Great idea. Can I use a keyboard and bar code scanner together? How to use a keyboard, if i connect a scanner into a keyboard port? Michal Michal Strnad [EMAIL PROTECTED] pí¹e v diskusním pøíspìvku news:[EMAIL PROTECTED] Hi, I would like to make an application for DVD,VHS rental with PHP,MySQL, but I don't know how to connect it with bar code scaner. Do you have an idea? I hope, that I can use PHP for it :-) Thanks Michal -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: I think this is a mysql question
Ronald Ramos wrote: create table oras( NameVARCHAR(30), TimeIn DATETIME, TimeOut DATETIME, Total DATETIME ); insert into oras values('Nhadie','2004-10-10 10:10:00','2004-11-11 12:12:00','TIMEDIFF(TimeIn,TImeOut)'); Hi, Are those correct? Because the value on the Total field is 000-00-00 00:00:00. I think there's something wrong. I'm using 4.0. mysql select * from oras; ++-+-+-- ---+ | Name | TimeIn | TimeOut | Total | ++-+-+-- ---+ | Nhadie | 2004-10-10 10:10:00 | 2004-11-11 12:12:00 | -00-00 00:00:00 | ++-+-+-- ---+ 1 row in set (0.01 sec) TIA I would not use DATETIME column type for Total as it is dependable on the number of days in the month. Use INT and store the number of seconds instead. Then you can update the column using: UPDATE oras SET Total = SELECT UNIX_TIMESTAMP(field1) - UNIX_TIMESTAMP(field2) [WHERE where_condition] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: I think this is a mysql question
Ronald Ramos wrote: create table oras( NameVARCHAR(30), TimeIn DATETIME, TimeOut DATETIME, Total DATETIME ); insert into oras values('Nhadie','2004-10-10 10:10:00','2004-11-11 12:12:00','TIMEDIFF(TimeIn,TImeOut)'); Hi, Are those correct? Because the value on the Total field is 000-00-00 00:00:00. I think there's something wrong. I'm using 4.0. mysql select * from oras; ++-+-+-- ---+ | Name | TimeIn | TimeOut | Total | ++-+-+-- ---+ | Nhadie | 2004-10-10 10:10:00 | 2004-11-11 12:12:00 | -00-00 00:00:00 | ++-+-+-- ---+ 1 row in set (0.01 sec) TIA I would not use DATETIME column type for Total as it is dependable on the number of days in the month. Use INT and store the number of seconds instead. Then you can update the column using: UPDATE oras SET Total = SELECT UNIX_TIMESTAMP(TimeIn) - UNIX_TIMESTAMP(TimeOut) [WHERE where_condition] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] bar code scaning in intranet ap
On Thursday 12 February 2004 08:26 am, Michal wrote: Great idea. Can I use a keyboard and bar code scanner together? How to use a keyboard, if i connect a scanner into a keyboard port? Michal You use a thing called a wedge. It plugs into your keyboard port on your computer. Then you plug in the keyboard and the scanner into the wedge. You must program your PHP to not look for submit buttons. You also need a browser that will submit a page when you press enter in a field. You can also get scanners with USB connections that work like keyboards. We've written a Warehouse Management System using these devices and a barcode printer. It's written in PHP and uses MySQL database. We use walkabout computers connected to the forklifts and cherrypickers. It's been working great now for almost a year now. James Hicks -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Imagejpeg and image size question
Hi, Tuesday, February 10, 2004, 9:50:20 PM, you wrote: J Hi, J I am new to manipulating JPGs using PHP. But i managed to create an J application that displays an JPG image in the browser (see below). J I have boiled the code down to the most nesesary. J My problem is that when i load the file c:\file.jpg directly in the J IE browser (using IMG SRC='c:\file.jpg'), and then get properties on the J image by J right clicking in the browser. the size is the same as it is on the HD J (83Kb). J However when i use the PHP code and get properties on the image by J right clicking in the browser. the image size is 264Kb. J How come the picture is bigger when loaded trough PHP as it is when J loaded trough the browser directly ? J best regards J John J -generate_jpg_picture.php starts--- J ?php J header(Content-type: image/jpeg, true); J $path = $_GET['filepath']; J $im = imagecreatefromjpeg($path); J Imagejpeg($im, '', 100); J ImageDestroy($im); ? J -generate_jpg_picture.php ends--- J -some_file.php starts--- J html J head J titlePHP Test/title J /head J body J IMG SRC='generate_jpg_picture.php?filepath=?php echo J urlencode(c:\\file.jpg); ?' J IMG SRC='c:\file.jpg' J /body J /html J -some_file.php ends--- Because you are sending it at 100% quality which is no compression, try backing it off to 30%. Probably the original was not at 100% quality anyway. -- regards, Tom -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Problem with SQL Server.
Hello, I'm working with a DB SQL Server. This DB has a table with Japanese characters. When I read a field (with Japanese characters) with function mssql_fetch_array(), always it return characters '?'. If I put 'print((Japanese characters));', these Japanese characters are shown correctly. My PHP file has follow code to work with Japanese characters: mb_internal_encoding(EUC-JP); mb_http_output(EUC-JP); mb_http_input(EUC-JP); mb_language(Japanese); My question: How can I show correctly the Japanese characters from a SQL Server DataBase? Thanks very much! Juan Torres. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Problem with XSLT Sablotron
Hi, I believe it's hiccuping at this: msxsl:script language=JScript implements-prefix=user ![CDATA[ function EscapeURL(selection) { if (selection(0) == null) return ; else if (selection(0).hasChildNodes()) return escape(selection(0).childNodes(0).nodeTypedValue); else return escape(selection(0).nodeTypedValue); } ]] /msxsl:script not being an expert on the MS XML api i not in a position to help you further. you should send this to an XSLT list. Juan Torres wrote: Hi, When I run my php file, this error message is shown: Warning: Sablotron error on line 27: function 'user:EscapeURL' not supported in c:\inetpub\wwwroot\projects_php\testing\test_xsl.php on line 7 Sorry, sample.xml could not be transformed by sample.xsl into result.xml the reason is that function 'user:EscapeURL' not supported and the error code is 51 Can anybody help me? I cann't solve this error. Thanks very much! Juan Torres. PS: Excuse me, my english is bad :( -- Raditha Dissanayake. http://www.radinks.com/sftp/ | http://www.raditha.com/megaupload Lean and mean Secure FTP applet with | Mega Upload - PHP file uploader Graphical User Inteface. Just 150 KB | with progress bar. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] PHP and DDE
Can PHP interface with other programs through DDE?
[PHP] recode segmentation fault
hi, I am having problems with recode extension for php 4.3.4. this is the configure options : './configure' '--prefix=/usr/local/linkbynet/php' '--with-gd=/usr/local/linkbynet/gd2' '--enable-gd-native-ttf' '--with-freetype-dir=/usr/local/linkbynet/freetype2' '--with-jpeg-dir=/usr/local/linkbynet/jpeg6b/' '--with-pdflib=/usr/local/linkbynet/pdflib' '--with-png-dir=/usr/local/linkbynet/libpng' '--with-dom=/usr/local/linkbynet/libxml2' '--with-zlib=/usr/local/linkbynet/zlib' '--with-mysql=/usr/local/linkbynet/mysql' '--with-apxs=/usr/local/linkbynet/apache/bin/apxs' '--with-imap' '--with-recode' '--enable-ftp' '--enable-bcmath' this sample code gives me a segmentation fault : ? $text = 062806310648062D002006270644063306480642002006270630062 .70631062C0639062A002006460643064506440020064A062706380 .628064A00200627064406270645062706310627062A00200645064 .6002006280646062A0020062706440631064A06270636; $text = pack(H*, $text); $text = recode(ucs2..utf-8, $text); echo '$text'\n; ? $text is a ucs2 text in hexadecimal. so I just decode it with pack() and then convert it into utf-8. if I remove 4 digits at the end of the hexa or add 4 digits (0623 for example) at the end, it works. what can I do about this? thanks for your help. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] [Q]PHP not taking input values from forms
that tag is working fine and shows me the info. For some reason php will take input values only from the URL, not from the html code. any ideas? From: André Cerqueira [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [PHP] [Q]PHP not taking input values from forms Date: Wed, 11 Feb 2004 23:56:37 -0300 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 time() is only echo'ed if $_POST['submit'] is something on this case maybe he has a really old version of php... $HTP_POST_VARS...? do what Richard Davey is saying, ?=phpinfo()? on the top Richard Davey wrote: Hello Dan, Wednesday, February 11, 2004, 6:39:35 PM, you wrote: DA they're being tested on a testing machine we use. I know PHP is (rather DA appears to be) working fine. Why would it be parsing files fine and calling DA phpinfo() fine, but not being able to take input values. that's strange echo time() isn't an input value. If it can't even do that then it's not surprising it can't handle $_POST values either, there is something else at play here and it's not your code. Stick echo phpinfo() at the top of your form code - does it work? -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFAKutoaxdA/5C8vH8RAo1WAJ9MZMtBAvXcJDizOVXblxp1DlCqSgCeNDdm rmE+jBIlMe4Hb6qaIUObCiQ= =NvxC -END PGP SIGNATURE- -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php _ Plan your next US getaway to one of the super destinations here. http://special.msn.com/local/hotdestinations.armx -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] [Q]PHP not taking input values from forms
On Thu, 12 Feb 2004, Dan Aloma wrote: that tag is working fine and shows me the info. For some reason php will take input values only from the URL, not from the html code. any ideas? A few questions: a) What's the exact version of PHP? b) Please post the smallest possible form that creates this problem. c) And how are you attempting to access these form values? If you're interested in some working examples and related information, have a look at the following manual page: http://www.php.net/variables.external Regards, Philip -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: Re[2]: [PHP] weird header() (bug may be)
--- adwinwijaya [EMAIL PROTECTED] wrote: why the php didnt stop processing after sending the header? because in my logic ... after sending the (redirect) to another page .. the process shall be stopped This might make sense to you, but only because you're thinking of header() as a redirect function. First, you must realize that it is not. It is a function that sets an HTTP header. If you've worked with headers much before, you may have run into an error that says something like this: Warning: Cannot add header information - headers already sent by (output started at ...) in ... on line ... To avoid this error, people must either set the headers they want prior to any output (often by placing calls to header() at the top), or they use output buffering. So, consider that you use header() at the top of your script. Now, you want to generate an image, so your script begins like this: ? header('Content-Type: image/png'); The rest of the script generates the image. Wouldn't you be frustrated if PHP decided to stop at the header() call? That would certainly frustrate me. Now, PHP could identify when the header() call is going to change the status code of the response. Perhaps, if the response is going to be a 300-level response, PHP should exit afterward. But, why make such a dangerous assumption when the developer can exit if he/she wants? It would also break things like this: ? header('Location: http://default.org/'); if ($foo) { header('Location: http://foo.org/'); } elseif ($bar) { header('Location: http://bar.org/'); } ? While this may not be eloquent, hopefully it is clear that the author intends for the user to only get redirected to http://default.org/ if both $foo and $bar are false. If PHP exited immediately after the first line, this script would not behave as the developer intendend. PHP's assumption would be wrong. Hope that helps. Chris = Chris Shiflett - http://shiflett.org/ PHP Security - O'Reilly Coming mid-2004 HTTP Developer's Handbook - Sams http://httphandbook.org/ PHP Community Site http://phpcommunity.org/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Unique ID - again
MySQL (or another SQL database) is the answer. You can check for an existing OR use it's auto_increment or whatever else you like. Create a field to track all this stuff. There is no other way to guarantee that an ID is unique than to check it against existing. Random functions yield random results, so each time, there is ALWAYS a chance of a number being repeated. Microtime works pretty well, but there is STILL a chance two people could have a transaction at the same time. Yes, the odds can be insanely, insanely small for various functions (i.e. MD5) but as you shorten the length of your number, the odds get higher. And yes, it's important to realize that a 6 digit unique identifier is limited to 1 million possible combinations, not nearly enough for most banks. I might suggest you do some more PHP learning before you go and develop an online bank application - this stuff is pretty fundamental programming and database concepts. If your overall skill level isn't very high, you're likely to make mistakes, and either have errors, problems in functionality, or, worse, security problems. -Galen On Feb 12, 2004, at 3:00 AM, Alex wrote: Hi folks, I'm using usual md5(microtime()); to create IDs, but now I've encountered a problem with that. I need to create explicitly 6 digit unique number(decimal). Yes, I know I can use for/while loop to fill a string with digits, but is it ABSOLUTELY sure that the random will never return same number when seed is microtime()? It is very important as the number will identify a bank transfer... Is there any other way than checking with all previous IDs? Or some MySQL function to do this for me? thank you Alex -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] [Q]PHP not taking input values from forms
Thanks for the suggestions, first of all. I tried that exact code from the code you included and I cut and pasted the Simple HTML Form, and below that I pasted the Accessing Data... php code. When I go to the page, all it does after I hit the submit button with data in the fields, is say no input file specified. But when I run it through the url giving the input names with values, it returns them. I tried getting it working with like ten people so far, and no one's been able to figure out... I am running PHP 4.3.4, btw. From: Philip Olson [EMAIL PROTECTED] To: Dan Aloma [EMAIL PROTECTED] CC: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: [PHP] [Q]PHP not taking input values from forms Date: Thu, 12 Feb 2004 16:44:37 + (GMT) On Thu, 12 Feb 2004, Dan Aloma wrote: that tag is working fine and shows me the info. For some reason php will take input values only from the URL, not from the html code. any ideas? A few questions: a) What's the exact version of PHP? b) Please post the smallest possible form that creates this problem. c) And how are you attempting to access these form values? If you're interested in some working examples and related information, have a look at the following manual page: http://www.php.net/variables.external Regards, Philip -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php _ Find great local high-speed Internet access value at the MSN High-Speed Marketplace. http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] A dumb question
Jeremy -- You have started a new thread by taking an existing message and replying to it while merely changing the Subject: line. That is bad, because it breaks threading. Whenever you reply to a message, your mail client generates a References: header that tells all recipients to which posting(s) your posting refers. A mail client uses this information to build a thread tree of the postings so that it is easy to see just how they relate to each other. With your posting style you successfully torpedoed this useful feature; your posting shows up within an existing thread even though it is completely unrelated. Always do a fresh post when you want to start a new thread. That means that you do not select any sort of Reply when you start your message. You can save the list address in your address book (or equivalent) for convenience. ...and then Jeremy Schroeder said... % % Hey Group Hi! % % I am starting to write class and objects and came across some syntax % that I dont understand. % % What does the ampersand do in the bottom example code, they both work. % % $n1 = $num1 - function(); % $n1 = $num1 - function(); 1) Search the manual. 2) Assigning by reference, as compared to the default assigning by value, means that the variable on the left of the '=' now points to the very same little chunk of memory as the variable on the right. This is different from the usual assignment in that when you change the left var you change the value for the right var, too. $a = 1 ; $b = $a ; $c = $a ; $b++ ; $c-- ; print a = $a ; b = $b ; c = $c ;\n ; // a = 0 ; b = 2 ; c = 0 3) You can't, as far as I know, assign-by-reference a function, so your code should generate a parse error. % % -Blake HTH HAND :-D -- David T-G * There is too much animal courage in (play) [EMAIL PROTECTED] * society and not sufficient moral courage. (work) [EMAIL PROTECTED] -- Mary Baker Eddy, Science and Health http://justpickone.org/davidtg/ Shpx gur Pbzzhavpngvbaf Qrprapl Npg! pgp0.pgp Description: PGP signature
RE: [PHP] A dumb question
HAND? I haven't seen that one... -Original Message- From: David T-G [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 11:34 AM To: PHP General list Cc: Jeremy Schroeder Subject: Re: [PHP] A dumb question Jeremy -- You have started a new thread by taking an existing message and replying to it while merely changing the Subject: line. That is bad, because it breaks threading. Whenever you reply to a message, your mail client generates a References: header that tells all recipients to which posting(s) your posting refers. A mail client uses this information to build a thread tree of the postings so that it is easy to see just how they relate to each other. With your posting style you successfully torpedoed this useful feature; your posting shows up within an existing thread even though it is completely unrelated. Always do a fresh post when you want to start a new thread. That means that you do not select any sort of Reply when you start your message. You can save the list address in your address book (or equivalent) for convenience. ...and then Jeremy Schroeder said... % % Hey Group Hi! % % I am starting to write class and objects and came across some syntax % that I dont understand. % % What does the ampersand do in the bottom example code, they both work. % % $n1 = $num1 - function(); % $n1 = $num1 - function(); 1) Search the manual. 2) Assigning by reference, as compared to the default assigning by value, means that the variable on the left of the '=' now points to the very same little chunk of memory as the variable on the right. This is different from the usual assignment in that when you change the left var you change the value for the right var, too. $a = 1 ; $b = $a ; $c = $a ; $b++ ; $c-- ; print a = $a ; b = $b ; c = $c ;\n ; // a = 0 ; b = 2 ; c = 0 3) You can't, as far as I know, assign-by-reference a function, so your code should generate a parse error. % % -Blake HTH HAND :-D -- David T-G * There is too much animal courage in (play) [EMAIL PROTECTED] * society and not sufficient moral courage. (work) [EMAIL PROTECTED] -- Mary Baker Eddy, Science and Health http://justpickone.org/davidtg/ Shpx gur Pbzzhavpngvbaf Qrprapl Npg! ** The contents of this e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom it is addressed. The views stated herein do not necessarily represent the view of the company. If you are not the intended recipient of this e-mail you may not copy, forward, disclose, or otherwise use it or any part of it in any form whatsoever. If you have received this e-mail in error please e-mail the sender. **
Re: [PHP] A dumb question
Alex Hogan wrote: HAND? I haven't seen that one... Have A Nice Day -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] A dumb question
Sorry for the mistake. I check the email I sent and I only sent it to the group, I changed the subject an removed all the of the message. Blake David T-G wrote: Jeremy -- You have started a new thread by taking an existing message and replying to it while merely changing the Subject: line. That is bad, because it breaks threading. Whenever you reply to a message, your mail client generates a References: header that tells all recipients to which posting(s) your posting refers. A mail client uses this information to build a thread tree of the postings so that it is easy to see just how they relate to each other. With your posting style you successfully torpedoed this useful feature; your posting shows up within an existing thread even though it is completely unrelated. Always do a fresh post when you want to start a new thread. That means that you do not select any sort of Reply when you start your message. You can save the list address in your address book (or equivalent) for convenience. ...and then Jeremy Schroeder said... % % Hey Group Hi! % % I am starting to write class and objects and came across some syntax % that I dont understand. % % What does the ampersand do in the bottom example code, they both work. % % $n1 = $num1 - function(); % $n1 = $num1 - function(); 1) Search the manual. 2) Assigning by reference, as compared to the default assigning by value, means that the variable on the left of the '=' now points to the very same little chunk of memory as the variable on the right. This is different from the usual assignment in that when you change the left var you change the value for the right var, too. $a = 1 ; $b = $a ; $c = $a ; $b++ ; $c-- ; print a = $a ; b = $b ; c = $c ;\n ; // a = 0 ; b = 2 ; c = 0 3) You can't, as far as I know, assign-by-reference a function, so your code should generate a parse error. % % -Blake HTH HAND :-D -- +-+-++ | Blake Schroeder | Owner/Developer |lhwd.net| +--(http://www.lhwd.net)+--/3174026352\--+ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: weird header() (bug may be)
This is not a bug. Here you expect that the script should end executing after the statement:header('Location:to_another_page.php') if the if statement is true. But it won't and it proceeds to the next statement; the next header statement:header('Location:to_previous_page.php'); An exit statement after the first header will solve the problem. With most browsers, if multiple redirect headers are received, the last instruction is followed. I'm not sure what the RFC says about this. Anil On Thu, 12 Feb 2004, adwinwijaya wrote: Hello php-generaler's , I have a script like this : if($foo == 'something'){ header('Location:to_another_page.php') ; }else { do another thing in here } header('Location:to_previous_page.php'); I got a problem ... when $foo == 'something' .. it wont redirect me to to_another_page.php but if I put die(); after calling header(); .. it will work ... is this the bug ? I use php 4.3.4 ... and Apache 2.x thanks -- Linuxense Information Systems Pvt. Ltd., Trivandrum, India http://www.linuxense.com/ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Using date() with the function fileatime() doesn't return accurate timestamp...
I saw the article at http://us2.php.net/manual/en/function.fileatime.php and gave it a shot with the timestamp for the file but it doesn't work correctly because it only returned the current timestamp (as it is from our watch or clock) but not the one from the file... I had verify that the file is correct and that the date() is working correctly and that the timeatime() is working correctly if they are tested independantly, so it is just putting them all three together cause them not to work right... --snip-- $current_filename = test.pdf; echo (date('F j, Y, h:i a', (fileatime($current_filename; --snip-- What did I do wrong?? Scott F. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] PHP with FTP installation
Hi, I just know how to reconfigure php installation with --ftp-enable. I already did a ./configure --ftp-enable command but when echo the phpinfo() hust to see if its been updated, its still showing ./configure' '--with-mysql' '--with-apxs=/www/bin/apxs' on the configure command. I would appreciate any help. thanks Rodner -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: Using date() with the function fileatime() doesn't return accurate timestamp...
Oh I understand now. There is a different between fileatime(), filectime() and filemtime(), with a letter 'a', 'c' or 'm'... The one with the m is what work with Unix/Linux.. Scott F. Scott Fletcher [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] I saw the article at http://us2.php.net/manual/en/function.fileatime.php and gave it a shot with the timestamp for the file but it doesn't work correctly because it only returned the current timestamp (as it is from our watch or clock) but not the one from the file... I had verify that the file is correct and that the date() is working correctly and that the timeatime() is working correctly if they are tested independantly, so it is just putting them all three together cause them not to work right... --snip-- $current_filename = test.pdf; echo (date('F j, Y, h:i a', (fileatime($current_filename; --snip-- What did I do wrong?? Scott F. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Re: Using date() with the function fileatime() doesn't return accurate timestamp...
Oh I understand now. There is a different between fileatime(), filectime() and filemtime(), with a letter 'a', 'c' or 'm'... The one with the m is what work with Unix/Linux.. Um, they all work with Unix/Linux -- they just mean different things. Atime is the time a file was last accessed. Mtime is the time the contents of a file were last modified. Ctime is the time the metadata about a file -- length, owner, permissions, times -- were last updated. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] php5beta4 problem
Hi, just updated from beta3 (which worked fine) and now my system is hosed. I am running Apache 1.3.29 on WinXP and when I try and simply bring up phpinfo I get the following message in the Apache error log file: Premature end of script headers: c:/php/php.exe Anyone any idea what is causing this?? One thing I did notice is that the Zip distribution of b4 is different to b3, for example it no longer creates a sapi directory with the apache dll's in, so I am wondering if this problem might be due to subtle differences in the distribution. Any help would be much appreciated. G. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] PHP License question
I currently developing a project that I wish to release under a, preferably, open-source and copy-left license. So, I'm taking a close look at the GNU GPL for this, and it seems to serve this purpose, well. However, I am aware that the PHP license conflicts with the GNU GPL, and, thus, anything released under the PHP license cannot also be released in software under the GPL. At least, this is my assumption. Now, to my question: if a PEAR package is released under the PHP license, and my product is under the GPL, can I include the PEAR package in my product? Under the above assumption, the answer would be no. So, what license should I release my product under to maintain it's copy-left status and yet still allow the PEAR packages to be included? -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] sql query question
hi if i have new car and i want to search each word in description can i do SELECT * FROM table WHERE descript = new OR descript =car?? any help is appreciated -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: sql query question
This is a SQL question, rather than a PHP question, so I would suggest doing a google search on SQL tutorials, but I think what you are trying to do would work like this: SELECT * FROM table WHERE descript LIKE '%new%' OR descript LIKE '%car%' Tony wrote: hi if i have new car and i want to search each word in description can i do SELECT * FROM table WHERE descript = new OR descript =car?? any help is appreciated -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] (retry) [ANN] Kwartz -- a template system for PHP, Ruby and Java
Hi all, (B (BI'm pleased to announce a public release of Kwartz. (B (BKwartz(*1) is a template sysmtem for web-designer and web-programmer. (B (BKwartz has the following features. (B (B* Kwartz can separate presentation logic from a template. (B* Kwartz can be available in PHP, Ruby and Java. (B* Kwartz doesn't break HTML design at all. (B* Kwartz can handle any type of text file. (B* Kwartz can sanitize automatically. (B (BSee Kwartz User's Guide for more detail. (B (BHomepage: (Bhttp://www.kuwata-lab.com/webtech/kwartz/index.html (B (BDownload: (Bhttp://www.kuwata-lab.com/webtech/kwartz/kwartz_2004-02-12.tar.gz (B (BUser's Guide: (B(English) (Bhttp://www.kuwata-lab.com/webtech/kwartz/users-guide.en.html (B(Japanese) (Bhttp://www.kuwata-lab.com/webtech/kwartz/users-guide.ja.html (B (B (B(*1) Development of Kwartz is subsidized by Exploratory Software (B Project of IPA (Information-Technology Promotion Agency Japan). (B (B (BHave fun! (B (B-- (Bregards, (Bkwa (B (B-- (BPHP General Mailing List (http://www.php.net/) (BTo unsubscribe, visit: http://www.php.net/unsub.php
[PHP] IMAP/SSL on Windows
Hello, I'm trying to get an SSL-encrypted IMAP connection to work on my Windows box. Here's the error message I get when attempting to connect: Warning: imap_open(): Couldn't open stream {snip:993/imap/ssl/novalidate-cert}INBOX in D:\Dan\Projects\Mail\mail.php on line 92 I'm running Windows XP Pro, Apache 2 and PHP 4.3.4 (CGI) and have the following listed in my phpinfo(): imap IMAP c-Client Version 2001 openssl OpenSSL support enabled OpenSSL Version OpenSSL 0.9.7b 10 Apr 2003 Thanks for any help, -Dan -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] [Q]PHP not taking input values from forms
that tag is working fine and shows me the info. For some reason php will take input values only from the URL, not from the html code. any ideas? A few questions: a) What's the exact version of PHP? b) Please post the smallest possible form that creates this problem. c) And how are you attempting to access these form values? If you're interested in some working examples and related information, have a look at the following manual page: http://www.php.net/variables.external Thanks for the suggestions, first of all. I tried that exact code from the code you included and I cut and pasted the Simple HTML Form, and below that I pasted the Accessing Data... php code. When I go to the page, all it does after I hit the submit button with data in the fields, is say no input file specified. But when I run it through the url giving the input names with values, it returns them. I tried getting it working with like ten people so far, and no one's been able to figure out... I am running PHP 4.3.4, btw. Be sure you rename the action part of the simple html form to whatever page you are using, instead of foo.php, as otherwise it will literally attempt to access foo.php I'm guessing this is what's happening by seeing no input file specified. Either fix that or on that same manual page is the example titled More complex form variables, this prints to itself as it demonstrates a use of the popular $_SERVER['PHP_SELF'] variable. Also, it's important you realize the difference between POST and GET, and how to access them, so you may want to read that manual page too. (hint: GET is through the URL's QUERY_STRING (the stuff after the ?) while POST is not). Regards, Philip -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: PHP License question
Ben Ramsey wrote: Now, to my question: if a PEAR package is released under the PHP license, and my product is under the GPL, can I include the PEAR package in my product? I don't know if this satisfies the legal requirement, but perhaps you could script some kind of automatic PEAR installation (assuming PEAR was already configured)? -Dan -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] [Q]PHP not taking input values from forms
Suggestion, Stick the following line of code in a spot in the php code that gets control from the form submit and see what is actually being passed from the form; foreach($_POST as $k = $v) echo POST[.$k.] = [.$v.]br; see if this shows you what you are looking for. NOTE: if you are not using the form POST method, change all instances of POST to GET in the statement. good luck, Warren Vail -Original Message- From: Philip Olson [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 1:55 PM To: Dan Aloma Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [PHP] [Q]PHP not taking input values from forms that tag is working fine and shows me the info. For some reason php will take input values only from the URL, not from the html code. any ideas? A few questions: a) What's the exact version of PHP? b) Please post the smallest possible form that creates this problem. c) And how are you attempting to access these form values? If you're interested in some working examples and related information, have a look at the following manual page: http://www.php.net/variables.external Thanks for the suggestions, first of all. I tried that exact code from the code you included and I cut and pasted the Simple HTML Form, and below that I pasted the Accessing Data... php code. When I go to the page, all it does after I hit the submit button with data in the fields, is say no input file specified. But when I run it through the url giving the input names with values, it returns them. I tried getting it working with like ten people so far, and no one's been able to figure out... I am running PHP 4.3.4, btw. Be sure you rename the action part of the simple html form to whatever page you are using, instead of foo.php, as otherwise it will literally attempt to access foo.php I'm guessing this is what's happening by seeing no input file specified. Either fix that or on that same manual page is the example titled More complex form variables, this prints to itself as it demonstrates a use of the popular $_SERVER['PHP_SELF'] variable. Also, it's important you realize the difference between POST and GET, and how to access them, so you may want to read that manual page too. (hint: GET is through the URL's QUERY_STRING (the stuff after the ?) while POST is not). Regards, Philip -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] negative impact on session management after turning off trans_id?
Hi. I'm wondering if there are any negative side affects to turning off the trans_id? Does it just mean that the site can't keep track of a user unless they have cookies turned on? There are enough parts of my site that don't require a session that I think requiring cookies is not a problem so I'm willing to turn it off. But I imagine there's something I'm not thinking about regarding this. If anyone can elaborate a little that'd be great! Thanks, Chris. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: PHP License question
Ben, You can ship the package as two separately licensed components. The PEAR packages will retain their original licenses. If you customize the package, then you should redistribute it as a different thing under your own license, and probably rename the files/classes so that they don't confuse with the PEAR package. The only thing you cannot do is release the unomdified PEAR package under GPL. A better alternative is to use the LGPL, which does not force other packages to use GPL, but is still copy-left/open-source. Greg P.S. I'm not an expert, this is my common sense understanding of how the license works. The PHP License is less restrictive than GPL. You can do anything you want with the code as long as it doesn't affect the original code's license. Ben Ramsey wrote: I currently developing a project that I wish to release under a, preferably, open-source and copy-left license. So, I'm taking a close look at the GNU GPL for this, and it seems to serve this purpose, well. However, I am aware that the PHP license conflicts with the GNU GPL, and, thus, anything released under the PHP license cannot also be released in software under the GPL. At least, this is my assumption. Now, to my question: if a PEAR package is released under the PHP license, and my product is under the GPL, can I include the PEAR package in my product? Under the above assumption, the answer would be no. So, what license should I release my product under to maintain it's copy-left status and yet still allow the PEAR packages to be included? -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: sql query question
select * from table where locate(new,descript)0 or locate(car,descript)0; Tony [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] hi if i have new car and i want to search each word in description can i do SELECT * FROM table WHERE descript = new OR descript =car?? any help is appreciated -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Mp3 with php?
does anyone know how to reproduce a mp3 file with php? Thanks Carlos A. Castillo. Ingeniero de desarrollo [EMAIL PROTECTED] Su Aliado Efectivo en Internet www.imagine.com.co (57 1)2182064 - (57 1)6163218 Bogotá - Colombia - Soluciones web para Internet e Intranet - Soluciones para redes - Licenciamiento de Software - Asesoría y Soporte Técnico -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Mp3 with php?
carlos castillo mailto:[EMAIL PROTECTED] on Thursday, February 12, 2004 3:53 PM said: does anyone know how to reproduce a mp3 file with php? What do you mean reproduce? Copy? Create from scratch? Represent visually? In any case.. I'd say PHP cannot do anything but create a copy of a file. It cannot read in data from a microphone or a cd player or the like (as far as I know). Chris. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] IPTC image comments utility
Does anyone know of a utility for WRITING or at least reading IPTC data in images with PHP? I found lots of EXIF utilities and did an experimental thing with that. PHP even has a built in EXIF reader but the only IPTC utilities I've found are expensive ActiveX or Delphi components and I don't even know if those could be operated by PHP. THe one I used worked at a command line I just did a shell command with a constructed syntax. Here's some stuff I dug up: COMIPTC 900 Euros http://www.j2s.net/EN/Products/comiptc.html Works with Visual Basic, ASP or PHP Matches Photoshop format Works on JPEG, TIFF, PSD TIPTC Delphi $566.60 http://www.atom5.com/Development/Components-Libraries-for-Delphi/tiptc-delphi-component-to-read-and-write-iptc-data-from-jpeg-tiff-files-2620.html JPEG/TIFF source code in pure Delphi code Atalasoft dotImage $329-$999 http://www.atalasoft.com/Components/dotImage C# ActiveX component .NET compatible many features AiS EXIF ActiveX $25-$99 (server) http://www.watermarker.com/exif-iptc-gps/ ActiveX component for Win9X/ME/NT/2k/XP Visual Basic, Delphi, C++, ASP, ASPX, PHP. EXIF, IPTC for JPEG/TIFF -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Re: sql query question
Hi, It is better to use FullText. Convert the description field to FullText. You will gain a powerfull control in this case. For more information on how to use FullText read a little-bit in the MySql manual (MATCH AGAINST) commands. Regards, Hamid Hossain --- Check Amazon.com Latest PHP books: http://www.amazon.com/exec/obidos/redirect?tag=zawraqclassif-20path=tg/browse/-/295223 Start Accepting CreditCard at your site in minutes: http://www.2checkout.com/cgi-bin/aff.2c?affid=106720 Download Alexa Tool Bar to stop Pop-ups for FREE: http://download.alexa.com/?amzn_id=zawraqclassif-20 Download Ready-Made Templates for your site: http://www.aplustemplates.com/cgi/affiliates/c1.cgi/zawraq_ad Original Message Follows From: Ben Ramsey [EMAIL PROTECTED] To: [EMAIL PROTECTED], tony [EMAIL PROTECTED] Subject: [PHP] Re: sql query question Date: Thu, 12 Feb 2004 16:05:16 -0500 This is a SQL question, rather than a PHP question, so I would suggest doing a google search on SQL tutorials, but I think what you are trying to do would work like this: SELECT * FROM table WHERE descript LIKE '%new%' OR descript LIKE '%car%' Tony wrote: hi if i have new car and i want to search each word in description can i do SELECT * FROM table WHERE descript = new OR descript =car?? any help is appreciated -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php _ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: IPTC image comments utility
OK this looks like the thing: http://multipart-mixed.com/photo/iptc.html It's a perl module. Can I use that in PHP? Paul Furman wrote: Does anyone know of a utility for WRITING or at least reading IPTC data in images with PHP? I found lots of EXIF utilities and did an experimental thing with that. PHP even has a built in EXIF reader but the only IPTC utilities I've found are expensive ActiveX or Delphi components and I don't even know if those could be operated by PHP. THe one I used worked at a command line I just did a shell command with a constructed syntax. Here's some stuff I dug up: COMIPTC 900 Euros http://www.j2s.net/EN/Products/comiptc.html Works with Visual Basic, ASP or PHP Matches Photoshop format Works on JPEG, TIFF, PSD TIPTC Delphi $566.60 http://www.atom5.com/Development/Components-Libraries-for-Delphi/tiptc-delphi-component-to-read-and-write-iptc-data-from-jpeg-tiff-files-2620.html JPEG/TIFF source code in pure Delphi code Atalasoft dotImage $329-$999 http://www.atalasoft.com/Components/dotImage C# ActiveX component .NET compatible many features AiS EXIF ActiveX $25-$99 (server) http://www.watermarker.com/exif-iptc-gps/ ActiveX component for Win9X/ME/NT/2k/XP Visual Basic, Delphi, C++, ASP, ASPX, PHP. EXIF, IPTC for JPEG/TIFF -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Mp3 with php?
On Thursday 12 February 2004 06:52 pm, carlos castillo wrote: does anyone know how to reproduce a mp3 file with php? reproduce??? -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Browser Detection another page
PHP Newbie here, I have been able to work out how to detect the browser I'm looking for. Then I need to take the user to another page. ? php if (strstr($HTTP_USER_AGENT,'Windows CE')) { //go to the Windows CE version of the site } else { // go to or Stay on the large version } ? Suggestions Col -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Browser Detection another page
Hello PETCOL, Friday, February 13, 2004, 12:57:59 AM, you wrote: P I have been able to work out how to detect the browser I'm looking for. P Then I need to take the user to another page. P if (strstr($HTTP_USER_AGENT,'Windows CE')) { P //go to the Windows CE version of the site P } else { P // go to or Stay on the large version P } if (strstr($HTTP_USER_AGENT, Windows CE)) { Header(Location: http://www.yoursite.dom/ce_page.php;); exit; } else { Header(Location: http://www.yoursite.dom/another_page.php;); exit; } -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Browser Detection another page
On Fri, Feb 13, 2004 at 11:57:59AM +1100, PETCOL wrote: Then I need to take the user to another page. ? php if (strstr($HTTP_USER_AGENT,'Windows CE')) { //go to the Windows CE version of the site } else { // go to or Stay on the large version } ? Hopefully you're aware that $HTTP_USER_AGENT is an unreliable variable, in that it is sent by the client, and can contain virtually anything. I saw a response letting you know how to do this, but I would recommend not sending people to different pages based on which browser/OS they're using. The most I would use $HTTP_USER_AGENT for is if I'm presenting a list of different OSes (say, for links to OS-specific downloads), and I want to select an intelligent default. It should be possible to use CSS/(X)HTML to present your content in a way that is accessible to whichever browser accesses your site. IMHO, browser-sniffing to serve different content is a bad idea. /$.02 -- [ joel boonstra | gospelcom.net ] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] Re: [SOLVED][PHP] Browser Detection another page
Richard, Thanks for that, looks too simple ;-) It's exactly what I want for this particular application. Thanks Col Richard Davey [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hello PETCOL, Friday, February 13, 2004, 12:57:59 AM, you wrote: P I have been able to work out how to detect the browser I'm looking for. P Then I need to take the user to another page. P if (strstr($HTTP_USER_AGENT,'Windows CE')) { P //go to the Windows CE version of the site P } else { P // go to or Stay on the large version P } if (strstr($HTTP_USER_AGENT, Windows CE)) { Header(Location: http://www.yoursite.dom/ce_page.php;); exit; } else { Header(Location: http://www.yoursite.dom/another_page.php;); exit; } -- Best regards, Richardmailto:[EMAIL PROTECTED] -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Mp3 with php?
carlos castillo wrote: does anyone know how to reproduce a mp3 file with php? Copy an existing file? Yes. Other than that, the only thing I know you can do with Mp3's is modify/add/delete id3 tags. -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] Re: IPTC image comments utility
This might help: http://pear.php.net/package/Image_IPTC Andy -Original Message- From: Paul Furman [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 7:36 PM To: [EMAIL PROTECTED] Subject: [PHP] Re: IPTC image comments utility OK this looks like the thing: http://multipart-mixed.com/photo/iptc.html It's a perl module. Can I use that in PHP? Paul Furman wrote: Does anyone know of a utility for WRITING or at least reading IPTC data in images with PHP? I found lots of EXIF utilities and did an experimental thing with that. PHP even has a built in EXIF reader but the only IPTC utilities I've found are expensive ActiveX or Delphi components and I don't even know if those could be operated by PHP. THe one I used worked at a command line I just did a shell command with a constructed syntax. Here's some stuff I dug up: COMIPTC 900 Euros http://www.j2s.net/EN/Products/comiptc.html Works with Visual Basic, ASP or PHP Matches Photoshop format Works on JPEG, TIFF, PSD TIPTC Delphi $566.60 http://www.atom5.com/Development/Components-Libraries-for-Delphi/tiptc- delphi-component-to-read-and-write-iptc-data-from-jpeg-tiff-files- 2620.html JPEG/TIFF source code in pure Delphi code Atalasoft dotImage $329-$999 http://www.atalasoft.com/Components/dotImage C# ActiveX component .NET compatible many features AiS EXIF ActiveX $25-$99 (server) http://www.watermarker.com/exif-iptc-gps/ ActiveX component for Win9X/ME/NT/2k/XP Visual Basic, Delphi, C++, ASP, ASPX, PHP. EXIF, IPTC for JPEG/TIFF -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] PHP with FTP installation
On Friday 13 February 2004 03:19, [EMAIL PROTECTED] wrote: I just know how to reconfigure php installation with --ftp-enable. I already did a ./configure --ftp-enable command but when echo the phpinfo() hust to see if its been updated, its still showing ./configure' '--with-mysql' '--with-apxs=/www/bin/apxs' on the configure command. Everytime you use ./configure it 'reconfigures' php from scratch. Meaning you have to specify every option you need/don't need. Thus in your case you would probably want to do: ./configure --with-mysql --with-apxs=/www/bin/apxs --enable-ftp Then you need to compile: make Then stop your webserver and install the newly compiled php: make install Then start your webserver. -- Jason Wong - Gremlins Associates - www.gremlins.biz Open Source Software Systems Integrators * Web Design Hosting * Internet Intranet Applications Development * -- Search the list archives before you post http://marc.theaimsgroup.com/?l=php-general -- /* Rebellion lay in his way, and he found it. -- William Shakespeare, Henry IV */ -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP] E-Commerce
Hi all. Is PHP a suitable language for building an online shop? Where would I go to find out more info on this? Thanks in advance! -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: date() funtion language
On 12-Feb-2004 André Cerqueira wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 i had problems with locale i think its safer to make a dayname and monthname array, and use getdate(), than build the string yourself snip //the follow should, but doesnt seem to work //setlocale(LC_ALL, 'pt_BR'); //echo date('l, j de F de Y'); ? date() doesn't format according to locale but strftime() does: setlocale(LC_ALL, 'pt_BR.ISO8859-1'); echo strftime('%A, %B %e %Y'); // output 'Quinta Feira, Fevereiro 12 2004' -- Don Read [EMAIL PROTECTED] -- It's always darkest before the dawn. So if you are going to steal the neighbor's newspaper, that's the time to do it. -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP] E-Commerce
Jimmy jimmy jimmy... Now if your question is, Can PHP be the most versatile languge that one should use for creating the best online shop ever? Then yes. Can PHP interact with MySql and just about every other Database program to store all your wonderful merchandise, in a nice compact easy to carry carrying case. Then YES. And if your also asking if PHP would be a server side scripting language like CGI/ASP/JAVA/~.. Then YES again. But if your asking whether or not PHP, would be able to SAY? Log your client's information Store your inventory Display your merchandise Process orders Interact with your clients Keep your client's informed of what's in and what's not Manipulate your inventory records Inform you of what's getting low for reordering Track what's selling and what isn't Allow online technical support through forums Allow 24x7 access to your Storefront And last but not least, Tuck you in at night? Then no. It can't tuck you in at night. But PHP does all the rest and SO MUCH MORERead about it here http://www.php.net Best Shopping cart website setup utility you'll ever need. Enjoy! Wolf -Original Message- From: Jimmy [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 10:44 PM To: [EMAIL PROTECTED] Subject: [PHP] E-Commerce Hi all. Is PHP a suitable language for building an online shop? Where would I go to find out more info on this? Thanks in advance! -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
I just about wet my self laughing. Just look around the net, PHP is used in about 40% of the online shopping sites. - Original Message - From: PHP Email List [EMAIL PROTECTED] To: Jimmy [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, February 13, 2004 6:48 PM Subject: RE: [PHP] E-Commerce Jimmy jimmy jimmy... Now if your question is, Can PHP be the most versatile languge that one should use for creating the best online shop ever? Then yes. Can PHP interact with MySql and just about every other Database program to store all your wonderful merchandise, in a nice compact easy to carry carrying case. Then YES. And if your also asking if PHP would be a server side scripting language like CGI/ASP/JAVA/~.. Then YES again. But if your asking whether or not PHP, would be able to SAY? Log your client's information Store your inventory Display your merchandise Process orders Interact with your clients Keep your client's informed of what's in and what's not Manipulate your inventory records Inform you of what's getting low for reordering Track what's selling and what isn't Allow online technical support through forums Allow 24x7 access to your Storefront And last but not least, Tuck you in at night? Then no. It can't tuck you in at night. But PHP does all the rest and SO MUCH MORERead about it here http://www.php.net Best Shopping cart website setup utility you'll ever need. Enjoy! Wolf -Original Message- From: Jimmy [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 10:44 PM To: [EMAIL PROTECTED] Subject: [PHP] E-Commerce Hi all. Is PHP a suitable language for building an online shop? Where would I go to find out more info on this? Thanks in advance! -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] Re: IPTC image comments utility
Andy Crain wrote: This might help: http://pear.php.net/package/Image_IPTC Andy Thanks, I don't know why I didn't find that. No documentation though and some unfamiliar stuff with @ and references to other commands which I guess this replaces (not sure). If so I can't figure out how to run the thing. Below is some snippage from the code trying to get at how to use it. I'm still interested in whether I can get the perl module to run with PHP, it sounds like it may be a bit more reliable. I've got perl loaded but don't know how to use it. snippage * This class encapsulates the functions iptcparse() and iptcembed(). It provides * the necessary methods for extracting, modifying, and saving IPTC data with * image files (JPEG and TIFF files only). class Image_IPTC var $_sFilename = null; var $_aIPTC = array(); * The IPTC fields that were extracted from the image * or updated by this class. var $_bIPTCParse = false; * set to true if the APP header data could be obtained. iptcparse (places where I saw this) http://us4.php.net/iptcparse function Image_IPTC( $sFilename ) $this-_aIPTC = @iptcparse($aAPP['APP13']); $this-_bIPTCParse = true; function isValid() return $this-_bIPTCParse; function getAllTags() return $this-_aIPTC; * An array of IPTC fields as it extracted by iptcparse() iptcembed (places where I saw this) http://us4.php.net/iptcembed one comment refers to the Image::IPTCInfo Perl module -undocumented, some serious compatibility problems, improper format function save( $sOutputFile = null ) $sImageData = @iptcembed($sIPTCBlock, $this-_sFilename, 0); function output() @iptcembed($sIPTCBlock, $this-_sFilename, 2); Paul Furman wrote: OK this looks like the thing: http://multipart-mixed.com/photo/iptc.html It's a perl module. Can I use that in PHP? -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
all in one awesome package: www.oscommerce.com - Original Message - From: PHP Email List [EMAIL PROTECTED] To: Jimmy [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, February 13, 2004 1:48 PM Subject: RE: [PHP] E-Commerce Jimmy jimmy jimmy... Now if your question is, Can PHP be the most versatile languge that one should use for creating the best online shop ever? Then yes. Can PHP interact with MySql and just about every other Database program to store all your wonderful merchandise, in a nice compact easy to carry carrying case. Then YES. And if your also asking if PHP would be a server side scripting language like CGI/ASP/JAVA/~.. Then YES again. But if your asking whether or not PHP, would be able to SAY? Log your client's information Store your inventory Display your merchandise Process orders Interact with your clients Keep your client's informed of what's in and what's not Manipulate your inventory records Inform you of what's getting low for reordering Track what's selling and what isn't Allow online technical support through forums Allow 24x7 access to your Storefront And last but not least, Tuck you in at night? Then no. It can't tuck you in at night. But PHP does all the rest and SO MUCH MORERead about it here http://www.php.net Best Shopping cart website setup utility you'll ever need. Enjoy! Wolf -Original Message- From: Jimmy [mailto:[EMAIL PROTECTED] Sent: Thursday, February 12, 2004 10:44 PM To: [EMAIL PROTECTED] Subject: [PHP] E-Commerce Hi all. Is PHP a suitable language for building an online shop? Where would I go to find out more info on this? Thanks in advance! -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
Terence wrote: all in one awesome package: www.oscommerce.com I just got finished building a site for a customer who wanted OSCommerce (didn't want to pay for a 'real' shopping cart, or for me to build him one), and in my 8+ years of web development, they have to be one of the worst in most aspects. First off, it won't install or run if you have register_globals off. When I saw this, I said to myself, this isn't so bad if they're writing secure code, but it opens up ALL the code on the site. Then I started configuring it (hacking it) to fit the customers wants and desires, and found a few areas where it could be compromised. Second, the code looks like it was written by someone who originaly had no intention of releasing this code to the world. It's sloppy, unorganized, and poorly (if at all) commented. Compare the code from an application like phpMyAdmin to OSCommerce to see what I mean. The only thing I have positive to say about it, is on it's ease of use for the end user who wants to run an online store, but doesn't know diddly about computers. Until they fix the first issue, I will continue to recommend against OSCommerce. -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
php-general Digest 13 Feb 2004 07:08:21 -0000 Issue 2587
php-general Digest 13 Feb 2004 07:08:21 - Issue 2587 Topics (messages 177537 through 177572): PHP with FTP installation 177537 by: rodner.edigitalweb.com 177564 by: Jason Wong Re: Using date() with the function fileatime() doesn't return accurate timestamp... 177538 by: Scott Fletcher 177539 by: Roger B.A. Klorese php5beta4 problem 177540 by: Gareth Thomas PHP License question 177541 by: Ben Ramsey 177547 by: Dan Phiffer 177550 by: Greg Beaver sql query question 177542 by: tony 177543 by: Ben Ramsey 177551 by: Steve Solomon 177555 by: Hamid Hossain (retry) [ANN] Kwartz -- a template system for PHP, Ruby and Java 177544 by: maco.letter.or.jp IMAP/SSL on Windows 177545 by: Dan Phiffer Re: [Q]PHP not taking input values from forms 177546 by: Philip Olson 177548 by: Vail, Warren negative impact on session management after turning off trans_id? 177549 by: Chris W. Parker Mp3 with php? 177552 by: carlos castillo 177553 by: Chris W. Parker 177557 by: Gerard Samuel 177562 by: John Nichel IPTC image comments utility 177554 by: Paul Furman 177556 by: Paul Furman 177563 by: Andy Crain 177570 by: Paul Furman Browser Detection another page 177558 by: PETCOL 177559 by: Richard Davey 177560 by: joel boonstra Re: [SOLVED][PHP] Browser Detection another page 177561 by: PETCOL E-Commerce 177565 by: Jimmy 177567 by: PHP Email List 177568 by: Philip J. Newman 177569 by: Philip J. Newman 177571 by: Terence 177572 by: John Nichel Re: date() funtion language 177566 by: Don Read Administrivia: To subscribe to the digest, e-mail: [EMAIL PROTECTED] To unsubscribe from the digest, e-mail: [EMAIL PROTECTED] To post to the list, e-mail: [EMAIL PROTECTED] -- ---BeginMessage--- Hi, I just know how to reconfigure php installation with --ftp-enable. I already did a ./configure --ftp-enable command but when echo the phpinfo() hust to see if its been updated, its still showing ./configure' '--with-mysql' '--with-apxs=/www/bin/apxs' on the configure command. I would appreciate any help. thanks Rodner ---End Message--- ---BeginMessage--- On Friday 13 February 2004 03:19, [EMAIL PROTECTED] wrote: I just know how to reconfigure php installation with --ftp-enable. I already did a ./configure --ftp-enable command but when echo the phpinfo() hust to see if its been updated, its still showing ./configure' '--with-mysql' '--with-apxs=/www/bin/apxs' on the configure command. Everytime you use ./configure it 'reconfigures' php from scratch. Meaning you have to specify every option you need/don't need. Thus in your case you would probably want to do: ./configure --with-mysql --with-apxs=/www/bin/apxs --enable-ftp Then you need to compile: make Then stop your webserver and install the newly compiled php: make install Then start your webserver. -- Jason Wong - Gremlins Associates - www.gremlins.biz Open Source Software Systems Integrators * Web Design Hosting * Internet Intranet Applications Development * -- Search the list archives before you post http://marc.theaimsgroup.com/?l=php-general -- /* Rebellion lay in his way, and he found it. -- William Shakespeare, Henry IV */ ---End Message--- ---BeginMessage--- Oh I understand now. There is a different between fileatime(), filectime() and filemtime(), with a letter 'a', 'c' or 'm'... The one with the m is what work with Unix/Linux.. Scott F. Scott Fletcher [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] I saw the article at http://us2.php.net/manual/en/function.fileatime.php and gave it a shot with the timestamp for the file but it doesn't work correctly because it only returned the current timestamp (as it is from our watch or clock) but not the one from the file... I had verify that the file is correct and that the date() is working correctly and that the timeatime() is working correctly if they are tested independantly, so it is just putting them all three together cause them not to work right... --snip-- $current_filename = test.pdf; echo (date('F j, Y, h:i a', (fileatime($current_filename; --snip-- What did I do wrong?? Scott F. ---End Message--- ---BeginMessage--- Oh I understand now. There is a different between fileatime(), filectime() and filemtime(), with a letter 'a', 'c' or 'm'... The one with the m is what work with Unix/Linux.. Um, they all work with Unix/Linux -- they just mean different things. Atime is the time a file was last accessed. Mtime is the time the contents of a file were last modified. Ctime is the time
RE: [PHP] E-Commerce
JOhn, do you have any other recommendations that you might have looked at after your experience with OS commerce? -Original Message- From: John Nichel [mailto:[EMAIL PROTECTED] Sent: Friday, February 13, 2004 9:10 AM To: [EMAIL PROTECTED] Subject: Re: [PHP] E-Commerce Terence wrote: all in one awesome package: www.oscommerce.com I just got finished building a site for a customer who wanted OSCommerce (didn't want to pay for a 'real' shopping cart, or for me to build him one), and in my 8+ years of web development, they have to be one of the worst in most aspects. First off, it won't install or run if you have register_globals off. When I saw this, I said to myself, this isn't so bad if they're writing secure code, but it opens up ALL the code on the site. Then I started configuring it (hacking it) to fit the customers wants and desires, and found a few areas where it could be compromised. Second, the code looks like it was written by someone who originaly had no intention of releasing this code to the world. It's sloppy, unorganized, and poorly (if at all) commented. Compare the code from an application like phpMyAdmin to OSCommerce to see what I mean. The only thing I have positive to say about it, is on it's ease of use for the end user who wants to run an online store, but doesn't know diddly about computers. Until they fix the first issue, I will continue to recommend against OSCommerce. -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php Disclaimer This e-mail transmission contains confidential information, which is the property of the sender. The information in this e-mail or attachments thereto is intended for the attention and use only of the addressee. Should you have received this e-mail in error, please delete and destroy it and any attachments thereto immediately. Under no circumstances will the Cape Technikon or the sender of this e-mail be liable to any party for any direct, indirect, special or other consequential damages for any use of this e-mail. For the detailed e-mail disclaimer please refer to http://www.ctech.ac.za/polic or call +27 (0)21 460 3911 -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
Okay.. these are for the Shopping Cart.. Can anybody here tell me.. how to build a Payment Gateway? For example: like 2CheckOut did.. not only applicatios connected with 2CheckOut... I want to know how to build a company like 2CheckOut.. Of course I know it is too hard.. but I must know about that.. Hope any body here knows about that.. Regards.. - Original Message - From: John Nichel [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 13, 2004 11:24 AM Subject: Re: [PHP] E-Commerce Angelo Zanetti wrote: JOhn, do you have any other recommendations that you might have looked at after your experience with OS commerce? Not that are written in PHP. Not that I wouldn't recommend any, I just haven't looked at any other PHP carts besides OS Commerce. I'm sure there are some good ones, just like there are quite a few good ones written in Perl, C, etc. You can look here... http://php.resourceindex.com/Complete_Scripts/Shopping_Carts/ -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
Radwan Aladdin wrote: Okay.. these are for the Shopping Cart.. Can anybody here tell me.. how to build a Payment Gateway? For example: like 2CheckOut did.. not only applicatios connected with 2CheckOut... I want to know how to build a company like 2CheckOut.. Of course I know it is too hard.. but I must know about that.. Hope any body here knows about that.. Regards.. *sigh* http://www.google.com/search?hl=enie=UTF-8oe=UTF-8q=php+payment+gatewaybtnG=Google+Search http://php.resourceindex.com/Complete_Scripts/Commerce_and_Finance/ -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP] E-Commerce
Cool!!! Do you mean by this I can open a company like PaySystems or 2CheckOut! Must I contact banks all over the world to make the Credit Card Transaction? Or must I register in an organization? What to do now after registratin here http://www.ospayments.com/001/contact.html what must I do? Regards.. - Original Message - From: John Nichel [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 13, 2004 11:39 AM Subject: Re: [PHP] E-Commerce Radwan Aladdin wrote: Okay.. these are for the Shopping Cart.. Can anybody here tell me.. how to build a Payment Gateway? For example: like 2CheckOut did.. not only applicatios connected with 2CheckOut... I want to know how to build a company like 2CheckOut.. Of course I know it is too hard.. but I must know about that.. Hope any body here knows about that.. Regards.. *sigh* http://www.google.com/search?hl=enie=UTF-8oe=UTF-8q=php+payment+gatewayb tnG=Google+Search http://php.resourceindex.com/Complete_Scripts/Commerce_and_Finance/ -- By-Tor.com It's all about the Rush http://www.by-tor.com -- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php