[AFMUG] testing this rocket ship

-- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] this list

Ive got the fuel if u got he beer LOL On 06/14/2018 10:17 AM, Steve Jones wrote: Am I hearing something needs burned down? I'm hearing something needs burned down. Sometimes fires just happen, it's outside our control On Thu, Jun 14, 2018, 10:08 AM Bill Prince >

Re: [AFMUG] Working away

DRINK WATER :) On 06/27/2018 09:54 AM, Jaime Solorza wrote: Working at a waste water facilityit is hot in here... Jaime Solorza -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Yard Pole Modem Mounts

/2018 04:18 PM, Adam Moffett wrote: Well, lightning traveled a couple of miles to the ground.  How much difference does a 10' post really make in path selection? -- Original Message -- From: "Dave" mailto:dmilho...@wletc.com>> To: af@af.afmug.com <mailto:af@af.afmug.com

Re: [AFMUG] OT Evil Microsoft

We all use Libreoffice here. Works on windows and linux direct no emulators. It takes a little getting used to but we all like it mucho betta than microsoft. I throw them a bone every year to support the opensource world. The major learning curve is just remembering to save in the correct

Re: [AFMUG] Graphing epmp AP's and SM's

also graph interface utilization. Josh On Wed, Jun 20, 2018 at 11:55 AM, Dave <mailto:dmilho...@wletc.com>> wrote: I am only graphing throughput for it now. If you have mibs to load into a mib viewer you can isolate single OID and follow cacti's docs on graphing a s

Re: [AFMUG] ePMP VLAN question

Just keep in mind to access that vlan over the wireless it must be enabled at the subscriber to all management over wireless and ethernet.  Forgot to do that and had a fun trip back to site to check a box LOL On 06/20/2018 10:01 AM, Adam Moffett wrote: Does the management VLAN exist on the

Re: [AFMUG] Graphing epmp AP's and SM's

I am only graphing throughput for it now. If you have mibs to load into a mib viewer you can isolate single OID and follow cacti's docs on graphing a single OID. On 06/20/2018 10:04 AM, Sam Lambie wrote: It appears that graphing epmps are a bit harder to do than the 450 SM's. Anyone have

Re: [AFMUG] [ External ] Re: Fwd: 450-900mhz significant latency after 5 SM's on AP

Awesomeness :) On 06/21/2018 11:37 AM, Matt Mangriotis via AF wrote: Yes, it did. Matt *From:*AF *On Behalf Of *Dave *Sent:* Thursday, June 21, 2018 11:27 AM *To:* af@af.afmug.com *Subject:* [ External ] Re: [AFMUG] Fwd: 450-900mhz significant latency after 5 SM's on AP Did this get

Re: [AFMUG] OT Evil Microsoft

LibreOffice OpenOffice is older and all developers moved to Libreoffice. On 06/20/2018 12:29 PM, Robert Andrews wrote: OpenOffice or LibreOffice On 06/20/2018 09:00 AM, ch...@wbmfg.com wrote: It should be OK for word and excel should it not? *From:* Colin Stanners *Sent:* Wednesday, June 20,

Re: [AFMUG] ePMP voltages again - specifically 2ghz

They make dental floss for that  :) On 06/21/2018 11:39 AM, Josh Luthman wrote: Except for every single Ubnt device and a majority of Mikrotiks Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 21, 2018 at 12:39 PM, Josh Baird

Re: [AFMUG] ePMP voltages again - specifically 2ghz

I do feel your pain on this subject though because we have most everything running on 48v and at sites that require it depending on space requirement that I have there I just remove old 24v system and add dcdc converter to take care of whats left on 24v. Otherwise I just leave old supply. We do

Re: [AFMUG] Yard Pole Modem Mounts

We avoid that if we can help it due to lightning factor. On 06/21/2018 03:54 PM, Matt wrote: What is everyone using for pole mounts when they put a dish in a customer's front yard? -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Tradition

I was that age when I memorized the resistor color code chart. On 06/21/2018 05:01 PM, ch...@wbmfg.com wrote: Had to get the camera just right to avoid showing the leg irons. Her mom and dad were both helping out today too.  As well as my daughter-in-law.  Orders are up, but I am too chicken

Re: [AFMUG] Exchange Domain Controller expert wanted

A! STOP! IT MAKE MY HEAD HURT! On 08/01/2018 07:36 AM, Erich Kaiser wrote: I agree, it can become a maintenance nightmare.  It is not so much installing it and getting it up and running but moving to new revisions of windows and exchange, We got rid of all of our hosted services and put

Re: [AFMUG] Satellite internet stats

total ickyness :) make me feel sticky LOL On 08/03/2018 10:28 AM, ch...@wbmfg.com wrote: Less  22,400 x 2 /186000= 240 mS one way. So 480 mS ping RT under perfect conditions. But in real life it is twice that.  No idea why.  Perhaps they are using another satellite connection for backbone

Re: [AFMUG] RF Armor for a CPE

Beat me up, but why? On 07/27/2018 11:56 AM, Jay Weekley wrote: This is for a customer that can't keep a stable link with a -54 on Ubquiti 2.4. Bill Prince wrote: They leak profusely out the back. The main benefit is to the sides. You will get better results if you don't mount them

Re: [AFMUG] RF Armor for a CPE

I think I have a pringles can laying around here somewhere you can have :) On 07/27/2018 11:56 AM, Jay Weekley wrote: This is for a customer that can't keep a stable link with a -54 on Ubquiti 2.4. Bill Prince wrote: They leak profusely out the back. The main benefit is to the sides. You

Re: [AFMUG] RF Armor for a CPE

Just curious why not a epmp force 200 and load up some elevate? On 07/30/2018 12:51 PM, Jay Weekley wrote: Are the Pringles still in it? Dave wrote: I think I have a pringles can laying around here somewhere you can have :) On 07/27/2018 11:56 AM, Jay Weekley wrote: This is for a customer

Re: [AFMUG] RF Armor for a CPE

I am sure there is a Brand new shiny can at your nearby grocery store :) On 07/30/2018 12:51 PM, Jay Weekley wrote: Are the Pringles still in it? Dave wrote: I think I have a pringles can laying around here somewhere you can have :) On 07/27/2018 11:56 AM, Jay Weekley wrote

Re: [AFMUG] What is wrong with this deal?

has he been reported yet? With paypal its a garuanteed refund wut is he accomplishing On 07/26/2018 04:35 PM, Eric Kuhnke wrote: all of the seller's listings are basically scams, you're not getting a 55" 4K 60Hz TV for $89 shipped.

Re: [AFMUG] Tower Fiber

I have used either or.. Depends on stock.. I get all my custom hybrid/fiber cable done at Best-tronics. Has armor and custom breakouts with what ever termination. SM or MM at that distance is not an issue On 07/26/2018 04:22 PM, SmarterBroadband wrote: What cable and who do you recommend for

Re: [AFMUG] Tower Fiber

The only reason I used it is because it was readily in stock and available. For some reason when I need a singlemode configuration its out of stock. So, I end up making the whole site MM On 07/26/2018 07:04 PM, Chuck McCown wrote: You could terminate MM with simple and cheap tools too.  For me

Re: [AFMUG] OT 3d printing and guns

Im just sayin... Who the hell would want a plastic one when you would only get a few shots of before the barrel melted. Also, I prefer the real deal.. It just feels good to squeeze down on a M4 and put the crosshairs of my Akog on a target at more than 400m and squeeze off a round. Mind u

Re: [AFMUG] Mikrotik stuff

How bout some bitcoin? On 08/01/2018 07:06 PM, Mitch Koep wrote: Does anyone still use Mikrotik boards? I am taking down a WSIP that went out of business and they used Mikrotik boards and MeanWell 24 volt DC power supplies. Do these have any value? Thanks Mitch Koep -- -- AF mailing

Re: [AFMUG] Ubiquiti Sues Cambium

Its all over Law 360 On 08/10/2018 10:12 AM, Mike Hammett wrote: I have all of the court documents, but I don't know if I can distribute them. - Mike Hammett Intelligent Computing Solutions

Re: [AFMUG] Ubiquiti Sues Cambium

Thats where I see the issue is non-compliant hardware raising a brow. On 08/10/2018 10:15 AM, Mathew Howard wrote: The funny thing is, it's entirely possible that Ubiquiti sold some extra hardware because of Elevate. For example, in our case it took some pressure off to convert all our towers

Re: [AFMUG] Ordering M-TOW gear from dealers

I love your stuff.. If it wasnt for the mtow line I would be trying to find something worth while from a fabricator which may or may not fit my needs. I use CTI to get this stuff :) On 08/07/2018 06:13 PM, Chuck McCown wrote: I wish I had a good response.  They all order good quantities of

Re: [AFMUG] Low Temperature AC

What about doing something to the outside ducts to allow outside air below 40deg to be pulled to inside for cooling and not use compressor at all. We have this setup for our data room and saves tons on power consumption. On 08/15/2018 10:14 AM, ch...@wbmfg.com wrote: Ah, yes, that’s it,

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

+1 this works too :) On 08/07/2018 09:38 AM, Seth Mattinen wrote: On 8/7/18 7:18 AM, Timothy Steele wrote: We Have a Mikrotik CloudCore Router running very old firmware (From 2015)  I have been tasked with getting the config with the latest stable firmware I Have a Mikrotik on my test

Re: [AFMUG] Moving Mikrotik Config from old firmware to new firmware

This is not such a bad thing to do by going thru each line to verify the completeness and syntax. Sometimes there things exported that do not need exporting. On 08/07/2018 09:27 AM, Avatar wrote: Morning, What I usually do in these situations, though it may not be the most efficient, is

[AFMUG] 8' 6Ghz Dishes for sale

Anyone in need of some 8' 6Ghz dishes? There are 5 dishes in all and need to be picked up. They were in transit and got in truck accident and acquired by local towing and recovery and now need to be discarded. 2 of them have dings on the rolled edge portion but others look fine. They come with

[AFMUG] More Stuff For Sale

an inventory soon. Thanks Dave -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Customers wont stop texting personal cell

+ 1 Billion LOL Love that Softphone app :) On 08/28/2018 10:49 AM, Matt Hoppes wrote: I don’t know that I can offer you any advice at this point, but this is why we all carry a VoIP soft phone on our cell phone, so we can call customers from the company phone number. On Aug 28, 2018, at

Re: [AFMUG] Customers wont stop texting personal cell

Thats what I did for a while to get them to call the correct numbers On 08/28/2018 11:07 AM, Brian Sullivan wrote: Type up a quick auto reply and save it somewhere on your phone. Next time you get one of these texts, reply with your "Auto-reply" and they will stop sending you messages.  No

Re: [AFMUG] OT I am gonna get sued prolly

Will this be a new app called Chucks FB? On 08/27/2018 04:48 PM, ch...@wbmfg.com wrote: But I would not be the person creating the content al la FB etc... *From:* Timothy Steele *Sent:* Monday, August 27, 2018 3:37 PM *To:* AnimalFarm Microwave Users Group *Subject:* Re: [AFMUG] OT I am

Re: [AFMUG] Battery heater pads

I have a few from old Cricket battery cabinets that have the thermostat sensor and fan controller On 07/18/2018 04:12 PM, Seth Mattinen wrote: On 7/18/18 2:08 PM, Adam Moffett wrote: Hmmm.cut the cord off and put a simple thermostat in line. I guess there's no specific reason I can't

Re: [AFMUG] Unauthorized Mikrotik winbox Login made changes

yep its evil.. Like mama says its the devil On 07/17/2018 08:38 AM, Josh Luthman wrote: Definitely need 6.42+ there are two major exploits you're open to. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 17, 2018 at 6:44 AM, Nick W

Re: [AFMUG] Unauthorized Mikrotik winbox Login made changes

My power router v4 is still on 6.27 because of some hardware driver issue for support of sfp modules. Last time I made the move to upgrade to 6.40 all of my sfp ports started flapping and would not stabilize no matter what I tried. Ive been watching the change logs and it seems there were some

Re: [AFMUG] Mikrotik & Cambium e410 with VLANS

Hit me off list I have the same setup at my office On 07/23/2018 09:32 AM, Lewis Bergman wrote: OK, so I know the title doesn't give you much. I evidently have forgotten what little I thought I knew about tik, VLANS, and maybe everything. I am trying to setup a couple of e410's for the new

Re: [AFMUG] Ethernet problems next to FM Antenna

We are co-lo'd with a 5K transmitter and similar run but we finally went with Superior essex rigid copper shield cable and used the faraday method of grounding. It was easy since the pmp450i came along we just had to make sure the rj45 was just long enough to connect with the metal grommet have

Re: [AFMUG] Will a CMM 2 Pass VLANs?

I dont remember a CMM2 but we used CMM3 which was the only one I remember having a managed switch built in that would do vlan and port isolation. latest firmware remember was 3.11 On 07/24/2018 09:59 PM, Christopher Gray wrote: A network I'm rebuilding has an old CMM in place. Software version

Re: [AFMUG] Ot: when to detach

to sense to have a back up plan if I die in a plane crash.  I have no worries at this time. I hope you can achieve this as well. Dave On 07/21/2018 11:42 PM, Steve Jones wrote: This is super off topic, maybe really relevant to some. I note we have been infiltrated by list nazis this year so let me

Re: [AFMUG] Ubnt Pico Station Replacement

Cambium epmp1000 hotspot kit. Comes with 2 5dbi antennas and in 2 different bands 2.4G and 5G On 08/31/2018 09:27 AM, can...@believewireless.net wrote: Any cheap, outdoor replacements for the Pico Station omni? -- -- AF mailing list AF@af.afmug.com

Re: [AFMUG] OT: Thermal Effect of Solar Panels

Time to get creative On 09/03/2018 06:37 PM, Mike Hammett wrote: https://www.google.com/maps/place/41%C2%B052'02.2%22N+88%C2%B044'01.9%22W/@41.867275,-88.7344092,219m/data=!3m2!1e3!4b1!4m6!3m5!1s0x0:0x0!7e2!8m2!3d41.8672746!4d-88.7338625 I don't really have a ton of area to put solar

Re: [AFMUG] ATT goes GAA CBRS for 5G?

Anyone want to buy a wisp? On 09/10/2018 03:23 PM, ch...@wbmfg.com wrote: How do you expect this to affect our group? *From:* Gino A. Villarini *Sent:* Monday, September 10, 2018 2:08 PM *To:* AnimalFarm Microwave Users Group *Subject:* [AFMUG] ATT goes GAA CBRS for 5G? This has huge

Re: [AFMUG] Trouble shooting decision trees/flow charts.

I have written a few when we train new folks let me see what i have On 07/13/2018 09:06 AM, Jay Weekley wrote: A question for those that do in house tech support.  Does anyone have any decision trees, flow charts or written troubleshooting steps that they are willing to share? -- *Jay

Re: [AFMUG] OT Sunday Reading

WOW! ,, looks fun.. My senior college year I built a z80 CPU from discrete TTL components. Talk about a power hog :) On 07/08/2018 10:37 AM, ch...@wbmfg.com wrote: You can get totally lost at this site: http://www.computerhistory.org/revolution/analog-computers/3 The first computer I built was

Re: [AFMUG] OT:DNS help!

This one we are trying to reach. I have no issues with other medical sites or any secure site.  I have a ticket in with Mercy support so hopefully we will get to the bottom of it. Thanks Dave On 09/11/2018 04:56 PM, Steve Jones wrote: is this your own domain or one youre trying to reach

Re: [AFMUG] Yard Pole Modem Mounts

We had to to mount a ptp650 with 2' dish to the top of a telephone pole for a utility company.  We expressed the concern about movement in the wind and I was told they were going to put in a tower. On 06/22/2018 08:51 AM, Steve Jones wrote: I just started putting in T posts temporarily and

Re: [AFMUG] Mikrotik Rogue DHCP Alert behind 450 SM

Is the sub in bridge mode ? If so do u have the protocol filtering set to filter up ? On 09/27/2018 10:26 AM, Nate Burke wrote: I have a single customer where their Router keeps making a Mikrotik generate Rogue DHCP Alerts.  The Customer is behind a 450 SM on version 15.1, and is operating

Re: [AFMUG] Mikrotik Rogue DHCP Alert behind 450 SM

DHCP Server. On 9/27/2018 11:31 AM, Dave wrote: Is the sub in bridge mode ? If so do u have the protocol filtering set to filter up ? On 09/27/2018 10:26 AM, Nate Burke wrote: I have a single customer where their Router keeps making a Mikrotik generate Rogue DHCP Alerts.  The Customer is behind

Re: [AFMUG] Solar system rough cost

I was gonna say... EPMP rocks on the power side. +1 On 10/06/2018 08:07 PM, Mathew Howard wrote: Actually, my experience has been that ePMP generally uses a bit less power than UBNT... On Sat, Oct 6, 2018 at 2:36 PM Timothy Steele mailto:timothy.pct...@gmail.com>> wrote: Runs at 70

Re: [AFMUG] OT: Best free anti-virus software.

Go Unbuntu Desktop... Problem solved problem stayin solved! Oh, and watch more AFT :) On 10/22/18 1:33 PM, Jay Weekley wrote: What is everyone using for free anti-virus software? Or should I suck it up and buy something? -- *Jay Weekley* *Cyber Broadband * -- -- AF mailing list

Re: [AFMUG] WiFi systems

Have a look at cambiums E410 line.. We have been using them for all kinds of residential and business deployments. Just installed 2 E501S units for an Off Road park in the woods on the side of a mountain. They Cover the entire entry point and all of the campground and performance rocks :)

Re: [AFMUG] Mobile in CBRS

That makes it easier for the carriers to stomp out the little GAA guys :) On 10/31/18 9:50 AM, Joe Novak wrote: I think it's more likely that they will have a licensed anchor channel and only aggregate 3.65 in the downlink, using different frequencies for uplink. Carrier aggregation is a

Re: [AFMUG] WiFi systems

What do you mean by clean handoff? With the latest firmware I have not seen any issues on any of the E4/5xx series with mesh or clients moving from one ap to the next. There are a few features to help dial it in for great hand off. I also noticed that cnmaestro plays a roll in managing the

Re: [AFMUG] Internet of Things

remember the Kyron Chip from Lawnmower Man 2 LOL! OMG why do I remember such stuff.. On 11/4/18 12:55 PM, Robert Andrews wrote: I think of it becoming the Internet of Crap...   There are going to be so much trash thrown on IPv6 when it's really the core of the net... On 11/04/2018 09:58 AM,

Re: [AFMUG] range extender question

We just offer whole home wifi or we just dont do it. Not worth it to try and support all kinds manufactures or brands. On 10/31/18 10:52 PM, Bill Prince wrote: Range extenders are evil. They are all different. Just say no. bp On 10/31/2018 4:10 PM, Ken Hohhof wrote: If a customer leases

Re: [AFMUG] Having fun

WOW! I had to take a step backwards LOL I remember the old Disks and the machines that ran them. On 10/29/18 9:55 AM, Chuck McCown wrote: Sent from my iPhone -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Movie Review

So, instead of "Talking Dead" we need a session of "Talking Space" :) On 10/18/18 10:16 AM, ch...@wbmfg.com wrote: I read a deconstruction of the movie.  They said that bracelet thing is about the only fabrication they injected. The rest is mostly factual. *From:* Cameron Crum *Sent:*

Re: [AFMUG] Wasps

Thats what my tower guy does. He tells me dont look them in the eye and they wont be tempted lol On 11/7/18 4:23 PM, Steve Jones wrote: i like wasps. They are my friends. Tell your guy to befriend them. you cant pet them though, no matter now much you want to. The trick is to just be mindful

Re: [AFMUG] OT cannot bear to toss

I have tons dated back to late 80s for motorolas processors and z80. I finally got rid of some but still have my faves because I still work with these older processors for fun. I have an old EEtools programmer that has to have a express card to interface with.     I have since upgraded to usb

Re: [AFMUG] OT - autotune

Umm.. I am sure 8K video will need an implant into the brain that has a fiber jack to jack into some serious Tb fiber. On 10/04/2018 04:34 PM, Ken Hohhof wrote: Re: [AFMUG] OT - autotune That’s what I suspected, but hoped wasn’t true. The Japanese have vocaloid robots with hologram

Re: [AFMUG] Compact rack injector?

that design will work for most deployments which is where I got the idea,but I am looking for that module for the 450i/m line with the same performance or similar to the cmm5. Dave On 10/03/2018 08:40 AM, Forrest Christian (List Account) wrote: I'm a bit confused We've been shipping web

Re: [AFMUG] Packetflux noob

as the CMM5 just no POE. I am sure someone from cambium could enlighten us if I am incorrect on this. Thanks Dave On 10/03/2018 10:28 AM, Forrest Christian (List Account) wrote: I have the new 3.65 medusa on my mind plus I'm a bit tired. The 48V 2.5A power supplies will run 2 non 3.65 medusa

Re: [AFMUG] Packetflux noob

? I’ve never quite figured out why a 3.65 SM is heavy and has cooling fins on the back, yet a 450b mid gain SM I think has higher xmt power and fits in the antenna feedtube. *From:*AF *On Behalf Of *Dave *Sent:* Wednesday, October 3, 2018 11:28 AM *To:* af@af.afmug.com *Subject:* Re: [AFMUG

Re: [AFMUG] 820C Physical Question

your looking for IE Type of cable:Hybrid 1,2,3 pair fiber with 1,2 pair 12gauge copper stranded termination type -LC,SC,ST Length Length of break out at each end Dave On 10/03/2018 10:41 AM, Josh Baird wrote: We currently use a CommScope hybrid cable from Best-tronics, but it’s MM and I’m looking

Re: [AFMUG] Packetflux noob

the new 5 channel PDU should be able to power the 3.65 medusa with whatever polarity power it accepts. On Wed, Oct 3, 2018, 10:25 AM Dave <mailto:dmilho...@wletc.com>> wrote: Forrest,  I have learned that specifically the 3.6Ghz Medusa doesnt do POE at all. It only accep

Re: [AFMUG] Improving WIFI coverage in homes

We us either a cambium E410 or 501 depending on indoor outdoor coverage and maestro does the rest for monitoring. We use scanners at the office to onboard any device for cambium networks has. Our shipping guy loves it. The force 180s make great little extenders or bridges to connect remote

Re: [AFMUG] Verizon 5G

I thought it was one of those color changing lizzards that sat on the antenna that made it go faster :) On 10/02/2018 09:13 AM, Ken Hohhof wrote: Verizon HomeFusion (later rebranded LTE Internet - Installed) came out in 2012, and installation was also contracted out.  Remember the

Re: [AFMUG] 820C Physical Question

We are installing our ptp820c's in a week. I ordered the bestronics hybrid armored cable for my deployment. I had to make one change to the install to accommodate the DC wire. I used a small sched80 box to install a transtector DC line protector and ran the leads from it to the radio for direct

Re: [AFMUG] Verizon 5G

For those in houston and other populous areas. Also, We all hope it make them Pools and pools of moneys On 10/01/2018 02:59 PM, Robert wrote: This could be serious... https://www.macrumors.com/2018/10/01/verizon-5g-home-internet-launches/ -- -- AF mailing list AF@af.afmug.com

Re: [AFMUG] The next generation of wireless networking will be called WiFi 6

I am waiting for the next implant that streams it straight to your brain :) Tag line "Upgrade your implant to EXTREME SUPER ULTRA MEGA X_FI today!" On 10/04/2018 08:38 AM, Ken Hohhof wrote: Better than 5G, but not as good as an iPhone X.  After WiFi 9, will the next one be WiFi X? *From:*

Re: [AFMUG] Looking for advanced edge router class

+1 billion On 09/30/2018 11:42 PM, Darin Steffl wrote: Tell the boss it won't all work in edgeos. It has nowhere near the feature set of Mikrotik. I don't kmow of any wisp using edgeos but I know tons that use Mikrotik so that has to mean something. On Sun, Sep 30, 2018, 12:00 PM Timothy

Re: [AFMUG] Mimosas surge doesn't help 450

What is the major difference between the Cambium GigE SS and yours Chuck? On 09/21/2018 11:33 AM, ch...@wbmfg.com wrote: Our CAT6 products are 100% gas discharge tube. Our GIGE line are hybrid semiconductor and gas discharge tube. *From:* Josh Luthman *Sent:* Friday, September 21, 2018 10:10

Re: [AFMUG] DIA pricing

Kaiser wrote: Thanks for the Fusion mention Dave.  We have worked hard the last several years building a network that is WISP/FISP friendly, offering flexibility in bandwidth costs, co-location, going where others would not, etc.. Steering around all of these resellers that have popped up

Re: [AFMUG] Ethernet problems next to FM Antenna

and aluminum shield and I would bet that shield has broken down internally due to heat and constant microwave effect. I found this after replacing our Best-tronics shielded cable. The foil was powder. hope this helps Dave On 09/18/2018 10:21 AM, Nate Burke wrote: Sorry for digging up the old

Re: [AFMUG] DIA pricing

This is why I like fusion.. I get a 10G but only charged for 1G. The pipe allows us to go over if we need it based on 96th percent. On 09/24/2018 01:07 PM, Lewis Bergman wrote: 5 years is practically forever. The per gig sounds great but I am prone to look at it more in the terms of need. If

Re: [AFMUG] SCADA porn

what is that ground for?? Looks like a ground to an outer seal of some sort. On 1/14/19 8:36 PM, Jaime Solorza wrote: Thanks.  First time using the new Phoenix Contact managed switch...will share experience once we get things going... Some extra grounding was called for as per engineers...

Re: [AFMUG] Ethernet 100M Copper Limit

I would also be curious about the quality of cable as well and the different gauges used. Noise can affect these distances dramatically so I am sure the 'safe' distance to run would be in that range. We ran indoor cat5 across the ground 800' using some 10baseT repeaters connected end to end

Re: [AFMUG] Reverse DNS IPv6

what kind of DNS servers are you runnning?? On 1/17/19 2:32 PM, Matt wrote: Anyone have a simple example with bind of doing forward and reverse DNS for both IPv4 and IPv6? I cannot seem to get reverse DNS working on IPv6. -- -- AF mailing list AF@af.afmug.com

Re: [AFMUG] AirFiber 5XHD Cacti Templates

something comes to mind... Oh yeah PTP550 :) On 1/17/19 1:48 PM, Josh Luthman wrote: 1.1.1 is one set of OIDs 1.1.2 is another set of OIDs (and it lost some capabilities from 1.1.1) There's a MIB on the website that sucks. I've been emailing them back/forth about this so we can get a useful

Re: [AFMUG] Business Documentation/Notes storage

Im with Lewis on this one LOL! I used to have and still do. A ton of archived data on misc drives and drive spaces. I have since consolidated much of it in one giant nas using Owncloud for access. Yes, The binders are what keeps everyone from asking me questions about certain sites and

Re: [AFMUG] Business Documentation/Notes storage

emies list. *From:* AF *On Behalf Of *dave *Sent:* Monday, January 14, 2019 10:31 AM *To:* af@af.afmug.com *Subject:* Re: [AFMUG] Business Documentation/Notes storage Im with Lewis on this one LOL! I used to have and still do. A ton of archived data on misc drives and drive spaces. I have

Re: [AFMUG] Front Mount Telecom batteries

The Tesla uses its own heater to keep em warm. It takes it from the charge or charging station On 1/21/19 1:54 PM, ch...@wbmfg.com wrote: I wonder how my car does it.  It does not have battery heaters but I have had plenty of 0F days lately and it charged. *From:* Robert *Sent:* Monday,

Re: [AFMUG] OT - "genius plan" to fund wall with porn tax

I vote Bugs bunny. On 1/23/19 10:17 AM, Robert wrote: Don Quixote = Congress! On 1/23/19 7:32 AM, Ken Hohhof wrote: Don Quixote for Congress! -Original Message- From: AF On Behalf Of Robert Sent: Wednesday, January 23, 2019 9:09 AM To: af@af.afmug.com Subject: Re: [AFMUG] OT -

Re: [AFMUG] email filtering

We use Spamdyke On 12/13/18 8:11 AM, David Funderburk wrote: What open source email filtering system is working well for you? Regards, David Funderburk GlobalVision 864-569-0703 For Technical Support, please email gv-supp...@globalvision.net . --

Re: [AFMUG] Fiber up the tower

We use Bestronics custom hybrid cable pre-terminated armor direct bury type. Has 1 pair 12awg stranded and 2 pair SM or MM strands. Been doing it for a while with no issues. Just did 250 full medusa install with DDB cabinet topside for all terminations to go. On 12/20/18 2:02 PM,

Re: [AFMUG] Managed whole house mesh wifi

We are doing the pure cambium solution using the cnmaestro with all of it is AWESOME! Inventory track is easier with a simple hand scanner products come in and get scanned straight to cnmaestro where they wait to on boarded. On 12/21/18 5:01 PM, David Coudron wrote: We have been running

[AFMUG] Scammer pop ups

what is everyone doing for pop ups that some peeps seem to get when they connect to your service but when they are on their hot spot they dont get them.  these popups range from taking a survey in your company's name or some gift to click on. It all looks very legit but your company did not

Re: [AFMUG] Can Anyone service this address?

We have the same desperation around these parts for sure.. Its usually one guy in the middle of mountain side somewhere only bear can get to :) On 12/13/18 12:35 PM, CBB - Jay Fuller wrote:  man that looks in the middle of no where treeville. i didn't even see a road called that - but

Re: [AFMUG] Scammer pop ups

something like Google Chrome Dev Tools will give more info. To get to these press F12 when in chrome. My favorite ad blocker is UBlock Origin. On Tue, Dec 11, 2018 at 4:52 PM Dave <mailto:dmilho...@wletc.com>> wrote: what is everyone doing for pop ups that some peeps seem to get

Re: [AFMUG] OT: Building a better mousetrap

I seen this same mouse trap in a small copier located in a feedmill when I worked on copiers back in the day LOL The copier was a clam shell type and in the lower corner was where the power came in which had a metal frame with the ground attached to it and the fuse for the hot line was right

Re: [AFMUG] odd Force 200 backhaul issues.

Have you placed a support request to cambium yet? https://support.cambiumnetworks.com/ On 12/3/18 7:53 PM, Brandon Yuchasz wrote: Looking to see if anyone has experienced a similar issue to this: We have a force 200 backhaul on a small bridged network. Several times a day now it stops

Re: [AFMUG] odd Force 200 backhaul issues.

You may be surprised at what you may learn once making contact with them. There are alot of unknowns here so the more you can elaborate on the details of config and such would help the list to define what may be the issue. Also, The cambium forum is a good place to open up for discussion. I

Re: [AFMUG] Managed whole house mesh wifi

. On 1/11/19 2:11 PM, Donnie McCorkle wrote: Thanks Dave.. that helps me understand. Donnie *From:* AF *On Behalf Of *David M *Sent:* Thursday, January 10, 2019 8:36 PM *To:* af@af.afmug.com *Subject:* Re: [AFMUG] Managed whole house mesh wifi Heres How we do it.. I have come from a long

Re: [AFMUG] Check out our new addition

thought. *From:* Dave *Sent:* Monday, September 17, 2018 7:02 AM *To:* af@af.afmug.com *Subject:* Re: [AFMUG] Check out our new addition this Link should work https://youtu.be/sQx75I33oow On 09/17/2018 07:59 AM, Dave wrote: Chuck may like some of the stuff we used :) https://youtu.be/sQx75I33oow

[AFMUG] OT:DNS help!

s from 207.204.21.104#53(ns8.worldnic.com) in 40 ms If we try to do a NSLOOkUP we just get severfail error. It almost seems like we have been blacklisted at worldnic.com Any help or suggestions would be appreciated. Thanks Dave -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT:DNS help!

Sorry,  It was supposed to be www.chistvincentonecare.com My issue is that I know it will resolve on other DNS servers but for some reason only my DNS will not resolve it which leads me to believe that we are blacklisted somewhere. On 09/11/2018 02:40 PM, Sam Morris wrote: Dave, here's what

  1   2   3   4   >