I have not seen a PMP450b in 3.65 yet?
Keep in mind the power issue is only related to the PMP450M 3.65 not the
5Ghz one.
On 10/03/2018 12:25 PM, Ken Hohhof wrote:
Well, so much for just swapping out a 450i AP for a 450m AP using the
same cabling. Cambium always seems to enjoy making our lives
difficult. So we have to keep changing our wiring and powering
schemes as we go from 100 series to 430, 450, 450i, and 450m. Yikes.
I wonder if the 3.65 version uses more power because of higher
regulatory xmt power, either as a Part 90 device or in the future as a
Part 96 device?
I’ve never quite figured out why a 3.65 SM is heavy and has cooling
fins on the back, yet a 450b mid gain SM I think has higher xmt power
and fits in the antenna feedtube.
*From:*AF <[email protected]> *On Behalf Of *Dave
*Sent:* Wednesday, October 3, 2018 11:28 AM
*To:* [email protected]
*Subject:* Re: [AFMUG] Packetflux noob
Forrest,
I have learned that specifically the 3.6Ghz Medusa doesnt do POE at
all. It only accepts direct dc hookup.
Which leads me to this question since it also needs sync and requires
cmm5 can I still use the packetflux rack injector unit
to provide the sync needed since it is the same as the CMM5 just no POE.
I am sure someone from cambium could enlighten us if I am incorrect on
this.
Thanks
Dave
On 10/03/2018 10:28 AM, Forrest Christian (List Account) wrote:
I have the new 3.65 medusa on my mind.... plus I'm a bit tired.
The 48V 2.5A power supplies will run 2 non 3.65 medusa radios
each. If you jumper the boards so 2 radios run off of each power
supply you'll be fine (the AF24 is a similar quantity of power).
But, a bulk supply is probably a better idea if you can find one
in your right form factor.
On Wed, Oct 3, 2018 at 8:07 AM Eric Muehleisen <[email protected]
<mailto:[email protected]>> wrote:
I've been using CTM2's for nearly a decade, but they do not
support 450m. CMM5 is waaay to expensive for what it does and
is clunky. I've been looking at Packetflux's RackInjector's.
I'm not familiar with PacketFlux products and need clarity on
something. See attached. I need to power (3) 450m AP's and
a(1) AF24. I also need physical spares for each unit. Is the
attached parts list correct or am I missing something?
Thanks!
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
*Forrest Christian*/CEO, PacketFlux Technologies, Inc./
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
[email protected] <mailto:[email protected]> |
http://www.packetflux.com <http://www.packetflux.com/>
<http://www.linkedin.com/in/fwchristian>
<http://facebook.com/packetflux> <http://twitter.com/@packetflux>
--
--
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
