Loved this line: “In 2013, a Proton rocket was lost because a worker installed
a sensor upside down — and hammered it in to fit. “
From: Ken Hohhof
Sent: Sunday, August 23, 2015 3:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium ePMP Feedback
Remember something like 8 years ago when the
A close up photo of the components that need to be removed could save some
folks time.
If you are worried about your ability to remove the components:
Many SMT components will come off by just a twist with long nose pliers. If
worried about pad and trace damage just use a well tinned iron
I wonder if they fired him or took him out behind the shed and shot him.
On 8/24/2015 9:17 AM, Chuck McCown wrote:
Loved this line: “In 2013, a Proton rocket was lost because a worker
installed a sensor upside down — and hammered it in to fit. “
*From:* Ken Hohhof mailto:af...@kwisp.com
Seeing as we contract a separate manufacturer to build our equipment, I am
being sensitive to how much I describe here in this public forum. They have
accepted responsibility and have remedied the situation, and while the whole
situation stinks, they’ve responded well, and we’ll get past this.
Probably not enough information to guess. Given the wording “increased the
incidence of”, one could speculate that this issue has always occurred, either
on some units or under some conditions, but with a low probability. I know I
recently RMA’d a unit that intermittently showed this issue,
I seem to recall somebody mentioning having issues with the fans on these.
Is it normal for these to throttle up and down? The one by my desk it seems
is always running up and down, It almost sounds like its trying to die, but
if its normal I wont be concerned about it
--
If you only see
Fire up the Clinton auto parse-extrapolator
OK, crystal ball in lap “factory process issue”...
Soldering most likely. Short, ground, bridge, open. Could be a
mis-aligned or misplaced chip too. Same difference.
“that resulted in an electrical problem”
Yeah, most physical
I gave you an opportunity to blame it on a cat. Our customers do it all the
time. Oh, that cat must have been playing with the cables again.
From: Matt Mangriotis
Sent: Monday, August 24, 2015 9:47 AM
To: af@afmug.com
Subject: Re: [AFMUG] Field Service Bulletin - PMP 450 SM
Catalina is the
The soup is thin today.
From: Matt Mangriotis
Sent: Monday, August 24, 2015 8:17 AM
To: af@afmug.com
Subject: Re: [AFMUG] Field Service Bulletin - PMP 450 SM
There was a factory process issue that resulted in an electrical problem which
increased the incidence rate of voltage issues with the
Probably a 600.00 hammer
On Aug 24, 2015 7:17 AM, Chuck McCown ch...@wbmfg.com wrote:
Loved this line: “In 2013, a Proton rocket was lost because a worker
installed a sensor upside down — and hammered it in to fit. “
*From:* Ken Hohhof af...@kwisp.com
*Sent:* Sunday, August 23, 2015 3:24 PM
There was a factory process issue that resulted in an electrical problem which
increased the incidence rate of voltage issues with the Analog Devices RF chip
(the “ADI” chip). It won’t affect ALL the units listed, but we don’t want to
take any chances. The issue has been root caused and
Is that the resistance of the bad connections?
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest Internet Exchange
http://www.midwest-ix.com
- Original Message -
From: Matt Mangriotis matt.mangrio...@cambiumnetworks.com
To: af@afmug.com
Does it work with M series Nanostations?
How about regular old Nanostations?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I bet the real story behind this is in Hillary Clinton's email.
On 8/24/2015 9:54 AM, Ken Hohhof wrote:
I gave you an opportunity to blame it on a cat. Our customers do it
all the time. Oh, that cat must have been playing with the cables again.
*From:* Matt Mangriotis
http://www.fiercewireless.com/tech/story/cambium-introduces-cnmaestro-detecting-network-connection-issues/2015-08-24
No mention here? Tell us more. Tell us more! ;-)
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest Internet Exchange
Yes, soon...
On Mon, Aug 24, 2015 at 11:01 AM, Josh Luthman j...@imaginenetworksllc.com
wrote:
It's right after DFS =P
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Aug 24, 2015 at 12:00 PM, Jeremy jeremysmi...@gmail.com wrote:
They spin up and down with temperature, but also go nuts with CPU
utilization. If you log in with winbox, you can hear them immediately
wind up and down.
I've had a lot of problems with the fans on more than half of the
1100AHX2's I have deployed. At some point, several weeks or a couple
It's right after DFS =P
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Aug 24, 2015 at 12:00 PM, Jeremy jeremysmi...@gmail.com wrote:
Not at all. They are saying that they should have backwards compatibility
completed by the end of
Just got an email about it. There is a webinar tomorrow morning. Less than
24hr notice. Must not be to excited about it.
https://attendee.gotowebinar.com/register/2281071380369478658
On Mon, Aug 24, 2015 at 11:08 AM, Mike Hammett af...@ics-il.net wrote:
We are plenty excited about our new offerings:
CAMBIUM NETWORKS INTRODUCES cnPILOT(tm), CLOUD-MANAGED 802.11AC WIFI SOLUTION
Cambium Networks(tm), a leading global provider of wireless broadband
solutions, today introduced cnPilot(tm), a suite of 802.11ac WiFi products for
use in home,
The cnPilot stuff sounds decent, though. Like the device we've always been
asking for.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest Internet Exchange
http://www.midwest-ix.com
- Original Message -
From: Lewis Bergman
So it sounds like to get the visibility they advertise you have to buy the
cn Pilot piece. They are still struggling to find something they can sell
in the management software space.
BAM, Prizm, wireless manager, note Maestro. I guess next out is Merlin and
Harry Potter.
The video is reminiscent
Plan right now is to have beta available in October.
Thanks,
Ben
On Mon, Aug 24, 2015 at 10:02 AM, Mathew Howard mhoward...@gmail.com
wrote:
Yes, soon...
On Mon, Aug 24, 2015 at 11:01 AM, Josh Luthman
j...@imaginenetworksllc.com wrote:
It's right after DFS =P
Josh Luthman
Office:
When will there be pricing available for the the R200 and R201 home-based
routers? We have been waiting and looking for an easy to use cloud managed
router for our residential subscribers that we can use for network
visibility. We got a quote from Calix for their 844E which is the
GigaCenter
To anyone seeing the mis-reading voltage issue:
Can you let me know the serial numbers of the units seeing this issue?
I'm hopeful that they are in the range of 98328 through 98357. It looks
like those we built since the last board revision may have an assembly
error which is causing this -
The two new ones I have are 98352 and 98356. If you could turn them
around pretty fast (say a week), then I wouldn't have a problem sending
them in to have the component removed and then returned to me so you
don't have to build new ones. Whatever you want to do. Do you want me to
open a
It should pass all VLANs (tagged and untagged) by default, unless something
has changed from the 800 to the 820.
On Mon, Aug 24, 2015 at 4:37 PM, Rory McCann rmm.li...@gmail.com wrote:
Anyone have any pointers for configuring these units as a simple
bit-flingers with 802.1q VLAN? I'm used to
If I have time I will look him up. Trying the old in and out
On Aug 24, 2015 4:12 PM, Mike Hammett af...@ics-il.net wrote:
Adair Winter of Amarillo Wireless operates there. He has some Telrad 3.65
GHz LTE gear.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Or nudge nudge wink wink does your wife. You know I mean ...does she like
the old in and out. Does she. Say no more. Butchered but from a
Python sketch
On Aug 24, 2015 4:54 PM, Mike Delp miked...@gmail.com wrote:
Alex http://www.imdb.com/name/nm532/?ref_=tt_trv_qu: No time for
the
If they fix the WM to actually say a PTP450 is really a PTP link and not
an Access link Im good :)
On 08/24/2015 11:52 AM, Lewis Bergman wrote:
So it sounds like to get the visibility they advertise you have to buy
the cn Pilot piece. They are still struggling to find something they
can
That has got me before...
From: Ken Hohhof
Sent: Monday, August 24, 2015 2:13 PM
To: af@afmug.com
Subject: Re: [AFMUG] Opps
Beware the wild leg.
https://en.wikipedia.org/wiki/High-leg_delta
From: Jaime Solorza
Sent: Monday, August 24, 2015 3:07 PM
To: Animal Farm
Subject: [AFMUG] Opps
Yes,
CNUT can not be behind a NAT function and Configure HTTP Service to use the
proper IP address. (Update, HTTP Server Configuration)
Steve B.
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Daniel Gerlach
Sent: Monday, August 24, 2015 4:23 PM
To: af@afmug.com
In Ceragon's interface, you have to connect the service points. it's overly
complicated in the web interface. it could be the same for 820
Sent from my iPhone
On Aug 24, 2015, at 4:44 PM, Josh Baird joshba...@gmail.com wrote:
It should pass all VLANs (tagged and untagged) by default, unless
Yes
On Aug 24, 2015 3:23 PM, Mike Hammett af...@ics-il.net wrote:
Is that what you tell all of the ladies?
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
https://www.facebook.com/ICSIL
https://plus.google.com/+IntelligentComputingSolutionsDeKalb
Anyone have any pointers for configuring these units as a simple
bit-flingers with 802.1q VLAN? I'm used to the PTP400/500/650 series
with a more simple GUI and less options. I have NO experience with
licensed RF gear.
We have a couple 820S links to deploy on our private network. I'm not a
Worth its weight in gold right! ☺
Dennis Burgess, CTO, Link Technologies, Inc.
den...@linktechs.netmailto:den...@linktechs.net – 314-735-0270 x103 –
www.linktechs.nethttp://www.linktechs.net/
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza
Sent: Monday, August 24, 2015 3:08 PM
okay thx
do you know what is this:
https://cloud.cambiumnetworks.com/
2015-08-24 22:32 GMT+02:00 Wireless Admin wirel...@htn.net:
Yes,
CNUT can not be behind a NAT function and Configure HTTP Service to use the
proper IP address. (Update, HTTP Server Configuration)
Steve B.
-Original
Adair Winter of Amarillo Wireless operates there. He has some Telrad 3.65 GHz
LTE gear.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest Internet Exchange
http://www.midwest-ix.com
- Original Message -
From: Jaime Solorza
Yep. Such is my lot in life
On Aug 24, 2015 4:27 PM, Ken Hohhof af...@kwisp.com wrote:
Now you’re just setting yourself up for another wild leg joke from Mike.
*From:* Jaime Solorza losguyswirel...@gmail.com
*Sent:* Monday, August 24, 2015 4:18 PM
*To:* Animal Farm af@afmug.com
*Subject:*
Alex http://www.imdb.com/name/nm532/?ref_=tt_trv_qu: No time for the
old in-n-out, love, I've just come to read the meter.
Clockwork orange.
On Mon, Aug 24, 2015 at 4:30 PM, Jaime Solorza losguyswirel...@gmail.com
wrote:
Yep. Such is my lot in life
On Aug 24, 2015 4:27 PM, Ken Hohhof
We are trying hard to reduce/eliminate all of the data entry of entering
new customers after installation. Currently they fill out a paper contract
form, collect payment for the installation, and turn that in at the office.
We then process them individually using the customer wizard to create a
Now you’re just setting yourself up for another wild leg joke from Mike.
From: Jaime Solorza
Sent: Monday, August 24, 2015 4:18 PM
To: Animal Farm
Subject: Re: [AFMUG] Opps
If I have time I will look him up. Trying the old in and out
On Aug 24, 2015 4:12 PM, Mike Hammett af...@ics-il.net
did you got it running? i have same Problem..Uploading image that´s all!!
2015-03-11 1:10 GMT+01:00 Wireless Admin wirel...@htn.net:
Thanks for commenting here. I’ll post the answer here once I get it
running. I tried turning firewall off but no dice.
Steve
Dear Cambium,
We love these new router products and have been able to provide a
monetizing source for our existing service while
providing excellent service to our end users.
Bottom Line..
They just ROCK!
Dave
--
Is that what you tell all of the ladies?
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest Internet Exchange
http://www.midwest-ix.com
- Original Message -
From: Ken Hohhof af...@kwisp.com
To: af@afmug.com
Sent: Monday, August 24, 2015
It is the same and very confusing.. Need to have a quick set page that
will pass all traffic and allow you to set freq, channel size, etc...
Erich Kaiser
North Central Tower
er...@northcentraltower.com
Office: 630-621-4804
Cell: 630-777-9291
On Mon, Aug 24, 2015 at 5:09 PM, Jon Langeler
phpipam
On 8/24/2015 7:38 PM, Paul Stewart wrote:
6Connect ...
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tim Reichhart
Sent: Monday, August 24, 2015 6:57 PM
To: af@afmug.com
Subject: [AFMUG] ip address management software
Guys
what are you guys using for
Ha. Only those two with a 20 oz Rib eye at Hoffbrau back in hotel sober
On Aug 24, 2015 7:47 PM, Lewis Bergman lewis.berg...@gmail.com wrote:
You lush. And that's bad coming from a guy who drinks scotch neat.
On Aug 24, 2015 6:53 PM, Jaime Solorza losguyswirel...@gmail.com
wrote:
Oh yes
One thing nice about Trango licensed is you give them your PCN and they ship
the radios to you configured ready to hang and pass traffic.
From: Erich Kaiser
Sent: Monday, August 24, 2015 8:04 PM
To: af@afmug.com
Subject: Re: [AFMUG] PTP820S
It is the same and very confusing.. Need to have a
Does anyone use playpus ? Likes or dislikes
Needing info whether to use them or not
We sent the contract and ach/cc during the time the office setup the
appointment. The customer had to sign it two days before the install. Out
contract had a clause that the customer had no obligation unless the
install was successful.
As a result, all customers were in the system complete under a
Uh, so you still use a BMU/Management platform similar to Platypus.
You didn’t ‘ditch’ it for QB, you replaced it with Powercode and associated
hardware.
We use QB in purely accounting mode, letting it track the chunk payments from
Platypus.
It can even be reconciled that way with QB but I
Normally I would say hell yea but about a decade ago I programmed about
one third of that. It took about six months and I ended up having to
contact the finish up to some Ukrainian to finish it up before I ended up
in a Looney bin and divorced and broke. Of course I suck at most things I
do so you
What should I expect to pay for a 48 count figure-8 cable?
Whose your favorite vendor for that?
You can probably hire office help (part time college kid if necessary) to do
paperwork for less per hour than installers. Especially since they are tying
up a truck while doing it. Not worth it if they do one less install per day
because they are sitting in the truck or standing in front of
I'm running it on several injectors with no issue. Stats show it is working
and there have been no outages where I have had to reactivate ports. The
Sync light looks spastic since it does not blink in sync with injectors that
have not been upgraded. Forrest said He understood why and it should
The thing is, they are already writing all of this information down.
Instead they could be typing it and submitting it from the field.
-Ty
On Mon, Aug 24, 2015 at 6:15 PM, Ken Hohhof af...@kwisp.com wrote:
You can probably hire office help (part time college kid if necessary) to
do paperwork
So you didn't care to automatically shut people off and turn them on?
On Aug 24, 2015 5:58 PM, Josh Luthman j...@imaginenetworksllc.com wrote:
If you want to program things on to it to make it shut people off and
manage IPs it's great. Windows only. WISP I bought had it, we ditched it
for QB
Ok, I’m going to tell you all what I want to program.
I’ve been wanting to do this for a long time now, and I hope to start it this
year (with Platypus integration).
I want a simple web site AND an app that pretty much does the same thing.
The interested customers goes to web site and
Is there any other way to drink it?
Thank you,
Daniel White
mailto:afmu...@gmail.com afmu...@gmail.com
Cell: +1 (303) 746-3590
Skype: danieldwhite
Social: http://www.linkedin.com/in/danielwhite84 LinkedIn:
https://twitter.com/DanielWhite84 Twitter
From: Af
Wellthe first vendor I talked to thought ADSS would actually cost
more by the time you got all the hardware.
I'm not sure if he's crazy yet.
Why did you decide on figure 8 vs ADSS? I've gotten 48ct ADSS for
around $.50/ft a few years ago. Generally speaking, the shorter the
length of the
If you want to program things on to it to make it shut people off and
manage IPs it's great. Windows only. WISP I bought had it, we ditched it
for QB and lost nothing.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 6:54 PM, Joseph
Guys
what are you guys using for IP address management software?
Tim
6Connect ...
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Tim Reichhart
Sent: Monday, August 24, 2015 6:57 PM
To: af@afmug.com
Subject: [AFMUG] ip address management software
Guys
what are you guys using for IP address management software?
Tim
I think I mentioned I have some ADSS hardware and nearly 2000 feet. But on
the other hand, I am pretty sure mine is 24 count.
On Mon, Aug 24, 2015, 7:25 PM Jason McKemie
j.mcke...@veloxinetbroadband.com wrote:
Why did you decide on figure 8 vs ADSS? I've gotten 48ct ADSS for around
$.50/ft a
It was...
Totally not even worth the price (free).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 9:34 PM, Sterling Jacobson sterl...@avative.net wrote:
Ah, got it. QB would be horrible to manage on a customer level for more
than
You lush. And that's bad coming from a guy who drinks scotch neat.
On Aug 24, 2015 6:53 PM, Jaime Solorza losguyswirel...@gmail.com wrote:
Oh yes
On Aug 24, 2015 5:09 PM, Jaime Solorza losguyswirel...@gmail.com
wrote:
Or nudge nudge wink wink does your wife. You know I mean ...does she
I use Powercode nowadays.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 8:49 PM, Lewis Bergman lewis.berg...@gmail.com wrote:
So you didn't care to automatically shut people off and turn them on?
On Aug 24, 2015 5:58 PM, Josh
Can you allow access to the plat server without having the customer configured
and have the tech setup the customer in plat? As far as getting a signature
maybe you can use an iOS or Android app to allow the custom to sign on a tablet
or smart phone with their finger.
Sincerely,
Joshaven
I hate the MIR profiles thing, but that's just me. And yes, I am totally
spoiled by Canopy.
On 8/24/2015 10:39 PM, Josh Luthman wrote:
Config QoS
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 11:27 PM, TJ Trout
U can only prioritize but not actually rate limit right ?
On Aug 24, 2015 9:18 PM, George Skorup geo...@cbcast.com wrote:
I hate the MIR profiles thing, but that's just me. And yes, I am totally
spoiled by Canopy.
On 8/24/2015 10:39 PM, Josh Luthman wrote:
Config QoS
Josh Luthman
Well hell that sounds freaking fantastic. Where do I sign up?
-Ty
On Mon, Aug 24, 2015 at 8:21 PM, Sterling Jacobson sterl...@avative.net
wrote:
Ok, I’m going to tell you all what I want to program.
I’ve been wanting to do this for a long time now, and I hope to start it
this year (with
You configure rate limits at the AP and select it at the SM.
Ursprüngliche Nachricht
Von: TJ Trout t...@voltbb.com
Datum: 25.08.2015 07:29 (GMT+01:00)
An: af@afmug.com
Betreff: Re: [AFMUG] Epmp traffic shaping?
U can only prioritize but not actually rate limit right ?
On
It's about $60 or so per pole if you're using dead ends IIRC, about half
that if you can use trunnions.
On Monday, August 24, 2015, Adam Moffett dmmoff...@gmail.com wrote:
Wellthe first vendor I talked to thought ADSS would actually cost more
by the time you got all the hardware.
I'm not
Config QoS
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 11:27 PM, TJ Trout t...@voltbb.com wrote:
Can you tell me where? I can't find it
On Mon, Aug 24, 2015 at 8:23 PM, Josh Luthman j...@imaginenetworksllc.com
wrote:
Yes.
Platypus here, been on it for a long time, integrates on both Fiber and
Wireless.
Regards,
Chuck
On Mon, Aug 24, 2015 at 9:36 PM, Josh Luthman j...@imaginenetworksllc.com
wrote:
It was...
Totally not even worth the price (free).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
https://rightsignature.com/signup https://rightsignature.com/signup
Justin Wilson
j...@mtin.net
---
http://www.mtin.net Owner/CEO
xISP Solutions- Consulting – Data Centers - Bandwidth
http://www.midwest-ix.com COO/Chairman
Internet Exchange - Peering - Distributed Fabric
On Aug 24, 2015, at
I'm with ya. I'll sign up for that.
Thank you,
Brett A Mansfield
On Aug 24, 2015, at 7:21 PM, Sterling Jacobson sterl...@avative.net wrote:
Ok, I’m going to tell you all what I want to program.
I’ve been wanting to do this for a long time now, and I hope to start it this
year (with
Can you tell me where? I can't find it
On Mon, Aug 24, 2015 at 8:23 PM, Josh Luthman j...@imaginenetworksllc.com
wrote:
Yes. There's a really good interface for it.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Aug 24, 2015 11:20 PM,
79 matches
Mail list logo
