No, but I did try turning it off and on again.
On 6/5/2017 9:20 AM, Jay Weekley wrote:
Have you tried updating the firmware to the latest version? Just kidding.
Nate Burke wrote:
Just lost another 'A' type LED bulb. GE Branded. Very light usage.
I think it is less than a year old
It seems clean, Late 80's subdivision in major metro, Underground
utilities, APC ups's never complain. 3 power outages in 15 years.
On 6/5/2017 9:09 AM, Josh Reynolds wrote:
Sounds like the driver.
How ... Clean is your power there?
- Josh
On Jun 5, 2017 9:01 AM, "Nate B
r that we flip on if we're on generator. The rest have been
used daily for well over a year with no failures.
On 5/27/2017 10:02 AM, Nate Burke wrote:
Hmm, I have confirmed over 50% failures on my HomeDepot Cree Bulbs,
I bought 6 and have replaced 3 so far.
On 5/27/2017 9:57 AM, Ch
What all are you using the cloud for? I can't think of why I would need
it to run the ISP Side, or are you doing other client services.
On 5/31/2017 5:23 PM, Josh Reynolds wrote:
I use linode and vultr. I relly like vultr, I just wish they were
in more locations.
Wish I could provide you
Hmm, I have confirmed over 50% failures on my HomeDepot Cree Bulbs, I
bought 6 and have replaced 3 so far.
On 5/27/2017 9:57 AM, Chuck McCown wrote:
I have converted everything to LED from Home Depot. Zero failures.
-Original Message- From: Nate Burke Sent: Saturday, May 27,
2017 8:53
I've converted some things to A type LED Bulbs at my house, mainly for
the reduced heat output, but I'm not seeing anywhere near the lifespan
advertised. I would say ~50% failure rate within 2 years. I'm betting
the actual LED's are fine, but the driver burns out. Is this common
with LED's or
Do you have to have some sort of Login for that? I just return a plain
'You are not authorized to access this page.' when following the link.
On 5/26/2017 8:42 AM, Mike Hammett wrote:
https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=3152229
Page 60
-
Mike Hammett
Intelligent C
erly installed link that has the right RSL on
each end to be in 1024QAM mode 99.9%+ of the time of course.
On Thu, May 25, 2017 at 5:53 PM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
Have you run BW tests on it? what kind of throughput are you
'really' seeing?
Have you run BW tests on it? what kind of throughput are you 'really'
seeing?
What Channel size Mimo/siso etc.
On 5/25/2017 7:42 PM, Mathew Howard wrote:
We have one up... other than some very ugly issues right after we put
it up (which was apparently a bug in the firmware they shipped with..
In years gone by I think VoipSupply had pretty good pricing on Bulk
purchases (contacting sales, getting special rate). It's been a while
though since I've made one from them though.
On 5/24/2017 6:03 PM, Rory Conaway wrote:
Looking for bulk pricing.
Rory
I'm getting ready to work on a temporary event with lots of People. Is
there a rule-of-thumb for number of NAT Devices behind a public
address? I've heard of issues with getting blacklisted by Google and
the likes thinking that there is an attack happening because of the
amount of requests fro
ng. I don't think that is how miss works. Ill habe to check
into that.
On Sat, May 6, 2017, 9:55 AM Nate Burke wrote:
I tried that. According to Amazon support, the Free prime shipping
is only available on the primary account/login. Each login would
have to pay for their own pri
On 5/6/2017 9:56 AM, Lewis Bergman wrote:
Interesting. I don't think that is how miss works. Ill habe to check
into that.
On Sat, May 6, 2017, 9:55 AM Nate Burke <mailto:n...@blastcomm.com>> wrote:
I tried that. According to Amazon support, the Free prime shipping
, May 6, 2017, 9:50 AM Nate Burke <mailto:n...@blastcomm.com>> wrote:
I went to 'share your prime benefits' and it only gives me the
option of 'Amazon business' for a single account, or 'Amazon
household' for 2 adults. Maybe you're grandfathe
wrote:
No idea - but I'm actually on someone else's Prime account, so I know
it works. I think it's called 'Household.'
On Fri, May 5, 2017 at 12:48 PM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
That's exactly what I want. Where do you set that?
On Fri, May 5, 2017 at 11:53 AM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
I don't think I'm trying to cheat Amazon, but does anyone have
amazon setup to be able to share the prime shipping perk between
multiple people. Like the boss and I and the wife can all
I don't think I'm trying to cheat Amazon, but does anyone have amazon
setup to be able to share the prime shipping perk between multiple
people. Like the boss and I and the wife can all order things and get
free shipping? We've done it before with just sharing the login, but
now with 2 step a
I think this is Holy Grail of RF Software. The radios can now tell us
when in the future they will have problems. You have 9 days until this
SM will have problems.
On 5/5/2017 8:55 AM, Adam Moffett wrote:
Uptime from beyond the 5th dimension
-- Original Message --
From: "Josh Luthm
It's been a while since I've dealt with someone with a bundled bill.
Are there any 'gotcha's' to watch out for when Porting land lines away
from an account that has both Landlines and Wireless? We'll be porting
all of the Land Lines off the account. Will it automatically convert
the Cells to
Has anyone powered a PTP 650 with an Edgepoint S16? The 650 spec sheet
says Proprietary POE method, but is that just voltage on specific pairs?
We use this
http://www.rowewireless.com/tp-dcdc-usb-24-usb-24v-poe-inserter-24vdc-6w-poe
with like a 12,000mah USB Battery pack. It will run FSK, 450 and EPMP
Radios (when they are not cold).
Use the bare unit for UNBT radios,
add this https://www.monoprice.com/product?p_id=5088 to power Camb
For those of you doing Video NVR installations, who is responsible for
making sure the equipment stays up? Especially with IP Based systems,
it seems like regular monitoring is needed to make sure the system is
still operational. Do you install and walk away, or proactively
monitor? If Proac
rent load-balancers coming in on
>> different peers of theirs. So this is probably a case where it
>wouldn't
>> be a terrible idea to use 8.8.8.8 and 8.8.4.4 as tertiary resolvers
>at
>> least on your monitoring systems.
>>
>> On 4/17/2017 7:57 AM, Andy Tr
I didn't want tho post this over on the Outages list, since I hadn't
seen anything there, I figured it is just me, but you guys are cooler to
tell me that it's just my problem.
I'm getting errors starting yesterday trying to email
phonenum...@vtext.com some messages are going through, but mos
as linking up to it.
On 4/10/2017 10:39 AM, Adam Moffett wrote:
Whoa baby. Can you clone the MAC of the old AP?
-- Original Message --
From: "Nate Burke" mailto:n...@blastcomm.com>>
To: af@afmug.com <mailto:af@afmug.com>
Sent: 4/10/2017 11:34:19 AM
Subject: Re: [
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Apr 10, 2017 at 10:37 AM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
I normally deploy 4 120 sectors on a tower. ABAB frequency. No
issues observed Keep 5mhz guard between AB and you should be
fine. Almost all custo
2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Apr 10, 2017 at 10:37 AM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
I normally deploy 4 120 sectors on a tower. ABAB frequency. No
issues observed Keep 5mhz guard between AB and you should be
f
I normally deploy 4 120 sectors on a tower. ABAB frequency. No issues
observed Keep 5mhz guard between AB and you should be fine. Almost all
customers can see more than 1 sector. Just waiting for automatic rescan
in EPMP to automatically put them back on the strongest sector after an
AP Reb
rs,
so I could probably find (or design something based around that).
Still looking�
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Burke
*Sent:* Thursday, April 6, 2017 12:49 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] ISO: fiber termination / coupler type box (not
a splice box_
I've used this one
http://www.balticnetworks.com/extralink-doris-12-core-fiber-optic-distribution-box-revised.html
and gotten LC couplers from fs.com http://www.fs.com/products/17579.html
On 4/6/2017 11:43 AM, Paul McCall wrote:
Small business MDU, running preterminated LC fiber into each uni
I have 4 analog lines in a hunt group, and the primary line has a bunch
of static from the phone company side. Is there an easy way to take
that line 'off hook' at the DMARC so that incoming calls will roll over
and ring into the good lines, and have this offhook solution be easily
identifiabl
Economy Must be improving... Last year, Spring break week, Hit new BW
Highs for the week. This year, Spring Break week, Traffic levels are
noticeably down. More people must be vacationing this year.
Like this one?
http://www.southern-tool.com/store/uw_boring_machines.php
On 3/22/2017 7:12 PM, Chuck McCown wrote:
I don’t think I have ever seen this.
*From:* Chris Fabien
*Sent:* Wednesday, March 22, 2017 12:50 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Vibratory Plow
Chuck you might be t
I'm trying to teach my mom (almost 80) how to use a tablet (An older
android model I have lying around). She has never used a computer, or
anything with a touch screen. I figured learning a PC is completely out
of the question. She's having nothing but problems because it just
'does things o
do a feedhorn for our product.
*From:* Nate Burke
*Sent:* Tuesday, March 21, 2017 8:37 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] New WBMFG products?
What was in the session? We have a pile of WBMFG Dishes running 5ghz
feedhorns today, we'd love to be able to just swap the Feedhorn and
upg
What was in the session? We have a pile of WBMFG Dishes running 5ghz
feedhorns today, we'd love to be able to just swap the Feedhorn and
upgrade links to 11X without having to change the dishes.
Nate
On 3/21/2017 9:24 AM, Chuck McCown wrote:
Kinda. Did a session at AnimalFarm about it. Not
So it seems like when a customer wants to update a windows 10 machine,
it will gladly and readily take all available bandwidth (and more). I'm
updating 2 brand new windows 10 machines in the NOC, plugged into
gigabit Ethernet, and they're downloading the windows updates at
<2mb/s. I would hav
I won't be down there this time, but Last time I was in Memphis, I went
to "Corky's Ribs and BBQ" https://www.corkysbbq.com There are a few
locations around Memphis. Get The 'Onion Loaf' It's a mess of Onion
rings the size of a loaf of bread. And it was Delicious.
On 3/12/2017 11:23 P
I've always bought these off Ebay
10 Pack of Antenna Mounts for Motorola / Cambium Canopy and Ubiquiti
Antennas
'10 Pack of Antenna Mounts for Motorola / Cambium Canopy and Ubiquiti
Antennas' I've always referred to them as 'Zirkel' Mounts. The last
auction expired in Feburary, and there do
I really miss the regional stations on all Streaming services. WGN and
MeTV in Chicago. You can't even get CLTV (all day Chicago news) on
anything other than Wireline providers.
On 3/1/2017 11:33 AM, Seth Mattinen wrote:
On 3/1/17 08:17, Chuck McCown wrote:
“YouTube’s service will cost $35
;<https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>
<https://www.facebook.com/thebrotherswisp>
<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
I was reading an article the other day that referenced that youtube
users upload 400 hours of video every minute, or 65 years of video every
day. Is my math right in showing that at an average of 2.5mb/s for the
video size, that's 600 TB of data per day being uploaded? Given
redundant copies
Does a regular mirror bounce IR Signals? If so, how big would it need
to be. Or does it not work this way?
agged to the Mikrotik on the other end. Everything is perfect.
Change it back to untagged, and Pings still go through, but no TCP Traffic.
The Original AF24 radio does not work Either tagged or Untagged, so I'm
pretty sure there is something wrong with it.
On 2/27/2017 4:05 PM, Nate B
I heard radio ads for them around the election.
Cha Cha Cha Chia!
On 2/27/2017 5:19 PM, Ken Hohhof wrote:
Are these for real, or more fake news? I haven�t seen them in stores.
https://www.amazon.com/Chia-Freedom-Choice-Donald-Trump/dp/B01F9P70YE
- Original Message -
From: "Nate Burke"
To: af@afmug.com
Sent: Monday, February 27, 2017 9:08:12 AM
Subject: Re: [AFMUG] AF24 and Edgepoint Slow Speed in 1 Direction
Flow control is disabled in both the Edgepoint and the 16SG. I found a
CCR1009 with an SFP+ Port I can put on th
7 10:10 PM, Mitch Koep wrote:
Flow Control??
On 02/26/2017 06:31 PM, Nate Burke wrote:
I have a setup which I just Installed, and I'm trying to track down
no speed in 1 direction on the link, Not having much luck so far, so
I thought I'd ask. The AF24 is reporting full modulation. I ca
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke
Sent: Sunday, February 26, 2017 6:31 PM
To: Animal Farm
Subject: [AFMUG] AF24 and Edgepoint Slow Speed in 1 Direction
I have a setup which I just Installed, and I'm trying to track down
no speed in 1 direction on the link, Not
I have a setup which I just Installed, and I'm trying to track down no
speed in 1 direction on the link, Not having much luck so far, so I
thought I'd ask. The AF24 is reporting full modulation. I can't even
maintain a winbox connection to the router.
RB1100X2 -> Copper to AF24
AF24 -> Copp
AT&T Just tried to "upgrade" a location I work with from POTS to
U-Verse, when I mentioned there is an elevator there, they said, "Oh,
you're not eligible for U-verse Phone then". That didn't stop sales
people calling once a week to schedule the "upgrade" though.
On 2/23/2017 8:40 AM, Josh Re
lpful things.
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Burke
*Sent:* Wednesday, February 22, 2017 4:36 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] EPMP1000 Heater POE Polarity
At least it doesn't default itself while it looks like it's
powercycling
On 2/22/201
it's booted and warm, a cold snap
isn't going to make it go down.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Feb 22, 2017 at 4:26 PM, Nate Burke mailto:n...@blastcomm.com>> wrote:
ething like <10F when you
first boot it up, right? If it's booted and warm, a cold snap isn't
going to make it go down.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Feb 22, 2017 at 4:26 PM, Nate Burke <mailto:n...@blastcomm
com>> wrote:
Where are you testing? It's like 40 degrees outside. I assume
you are testing in a freezer?
-Original Message-
From: Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] On Behalf Of Nate Burke
Sent: Friday, February 10, 2017
http://www.c9networks.com/
Full Docsis setup. Then just throw cable modems on the end.
On 2/22/2017 10:09 AM, Chuck McCown wrote:
MOCA adapters and then any switch you want.
*From:* Rory Conaway
*Sent:* Wednesday, February 22, 2017 9:05 AM
*To:* af@afmug.com
*Subject:* [AFMUG] does anyone make
’d like to try some of these F-POEs out.
On Feb 14, 2017, at 12:55 PM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
Armored PVC (OFNR) Patch Cable?� Doesn't say anything out
indoor/outdoor rating.� Unless I'm not in the right place.�
On 2/14/2017 1:34 PM, Gino
00 meters.. heh.
They also said the armored cable isn't recommended to be used outdoors.
Speaking of outdoor pre-made cables.. anybody got a source for outdoor
shielded cat6 patch cables? I’d like to try some of these F-POEs out.
On Feb 14, 2017, at 12:55 PM, Nate Burke <mailto:n..
-4 monitors from a single port
On Feb 17, 2017 4:46 PM, "Nate Burke" <mailto:n...@blastcomm.com>> wrote:
I found the Dell Refurb site. AMD Video card gives a Display port
and DVI, I5 8gb ram for $209. That might be what I'm looking for.
On 2/17/2017 4:44
I found the Dell Refurb site. AMD Video card gives a Display port and
DVI, I5 8gb ram for $209. That might be what I'm looking for.
On 2/17/2017 4:44 PM, Jaime Solorza wrote:
Get one with Display port and get converter to HDMI
On Feb 17, 2017 3:37 PM, "Nate Burke" <mailto:
The Wife is looking for a new Desktop, She doesn't need anything fancy
(i3, i5 is fine), but want's to have 2 monitors hooked up to it (HDMI
Inputs) I really don't feel like building one. Oh, and she want's it
cheap. Looking at the Dell, HP, and Lenovo sites, cheap PC's are really
easy to fi
On Thu, Feb 16, 2017 at 10:08 AM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
I have a UPS that I recently installed pulling a 'Site Wiring
Fault' for 20 seconds a few times a day, at the exact same time
daily. There are no other local electrical device at the l
I have a UPS that I recently installed pulling a 'Site Wiring Fault' for
20 seconds a few times a day, at the exact same time daily. There are no
other local electrical device at the location that I can find turning on
or off at the same time, or that would have this kind of regularity.
There
ant Heat Shrink Tubing $55. Put this over
the 7$ patch cable, and it's now outdoor rated?
On 2/14/2017 5:18 PM, Jason McKemie wrote:
Clearfield evidently makes some.
http://www.clearfieldconnection.com/products/ruggedized-jumpers.html
On Tuesday, February 14, 2017, Nate Burke <ma
, minimum order quantity is 1000 meters.. heh.
They also said the armored cable isn't recommended to be used outdoors.
Speaking of outdoor pre-made cables.. anybody got a source for outdoor
shielded cat6 patch cables? I’d like to try some of these F-POEs out.
On Feb 14, 2017, at
r cables on the site that I'm missing?
On 2/14/2017 2:44 PM, Gino Villarini wrote:
On All fiberstore jumpers you can modify the length….
From: Af mailto:af-boun...@afmug.com>> on
behalf of Nate Burke mailto:n...@blastcomm.com>>
Reply-To: "af@afmug.com <mailto:af@
What are they labeled as? I found the Mil Spec patch cables (which I
would presume are Outdoor), but those are only 1M.
On 2/14/2017 2:23 PM, Jason McKemie wrote:
Fiberstore.com has outdoor cables.
On Tuesday, February 14, 2017, Nate Burke <mailto:n...@blastcomm.com>> wrote:
ot of
the cable is oval and cable glands such as on a Siklu's port will
require a round cable to seal properly.
On Tue, Feb 14, 2017 at 11:20 AM, Nate Burke <mailto:n...@blastcomm.com>> wrote:
Does anyone have a source for outdoor rated patch fiber patch
cables? Like 10&#x
nyway. Oh well.
On 2/9/2017 10:17 PM, Nate Burke wrote:
This is for a single, stand alone machine, very low storage
usage, just want to cover a HD failure.
On 2/9/2017 9:42 PM, Josh Reynolds wrote:
Agreed.
Software Storage FTW. (ZFS, Ceph, Gluste
Armored PVC (OFNR) Patch Cable? Doesn't say anything out indoor/outdoor
rating. Unless I'm not in the right place.
On 2/14/2017 1:34 PM, Gino Villarini wrote:
Fiberstore.com ?
On 2/14/17, 3:20 PM, "Af on behalf of Nate Burke" wrote:
>Does anyone have a source for ou
Does anyone have a source for outdoor rated patch fiber patch cables?
Like 10' or 20' SC/LC cables to go from a fiber distribution box to a
radio. Or are all patch cables inherently UV resistant? Or with Fiber
does it not matter.
I'm looking to add a 10G interface into one of my X86 Mikrotik boxes.
Anyone have a recommendation for a card that is compatible with Tik and
hopefully won't break the bank?
here is a very, very small chance that I had the power pairs swapped.
On Fri, Feb 10, 2017 at 3:49 PM, That One Guy /sarcasm
mailto:thatoneguyst...@gmail.com>> wrote:
if this is the case, wouldnt 4 cheap diodes always ensure the
heater polarity is correct?
On Fri, Feb 10, 2
preheaters in their 5830
series radios, no one would do that ever again.
I know I didn't answer your question, but it sounds like you've already
answered it and are just looking for confirmation.
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke
S
I've been running some tests with Cold startup of EPMP1000 w/ sync
Radios. Does the Internal heater only function with 4/5- 7/8+? A cold
radio (18F) radio will power on but seems stuck in a reboot loop with
4/5+ 7/8- The same radio powered on and booted within 2 minutes or so
with 4/5- 7/8
I picked up an LSI 9240. It says it has win10 software, and was <$100.
Hopefully it will work.
On 2/10/2017 12:13 AM, Rory Conaway wrote:
You can’t go wrong with Adaptec. We use it on our desktops for
accounting.
Rory
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Nate Bu
and adding 1-2 more may not cost much.
>
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] On Behalf Of Nate Burke
> Sent: Thursday, February 9, 2017 10:18 AM
> To: Animal Farm mailto:af@afmug.com>
I'm looking for a simple hardware raid controller to setup 2 drives in
Raid 1. The motherboard has the ICH9R controller which can do Raid1,
but it looks like the monitoring software isn't compatible with Windows
10 (I just bricked the box trying to install an older version)
It's been a while
I just saw the FC-SM series of cables. Has anyone used it yet? Looks to
be pre-terminated 6 strand in 100,200,300 foot lengths. What's it's
quality like? The datasheet is light on details, like bend radius.
Also, the picture looks like they just stripped back the outside jacket
and didn't pu
So you're saying with your system I can get a Maple Syrup Tap in my
house? STTH?
On 2/7/2017 3:50 PM, Chuck McCown wrote:
Maple Data Inc.
The sweetest internet on the planet!
*From:* Joe Novak
*Sent:* Tuesday, February 07, 2017 2:49 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] OT: Sold TSLA, w
I haven't been following the drone stuff very closely, and I've never
used one. Is a Drone with a good camera feasible for site surveys? I
want to determine if I was 20' or 30' above this roof, do I have a line
to a tower. I have a few commercial sites where I think that 20' or 30'
over a ro
o those radios and either disable https or change the firmware.
On Mon, Feb 6, 2017 at 8:13 AM, Nate Burke mailto:n...@blastcomm.com>> wrote:
My Browser got upgraded to Firefox 50.0, and ever since I've
been having trouble getting into Grandstream PBX's. On
My Browser got upgraded to Firefox 50.0, and ever since I've been having
trouble getting into Grandstream PBX's. On some PBX's I can log in, and
then navigate to a dozen or so pages, then it just stops responding. On
others, I can't even pull up the login screen. Chrome still seems to
work OK
Then It's not my problem anymore?
On 2/2/2017 10:25 AM, Adam Moffett wrote:
What about when you're dead or get a new job?
-- Original Message --
From: "Nate Burke"
To: af@afmug.com
Sent: 2/2/2017 11:19:50 AM
Subject: Re: [AFMUG] POE-IN Powered Switch that will d
phe, just bad.
I'm sure your individual devices are lower consumption than that, but
you can't assume someone won't plug in something higher power at a
later date.
IMO run two cables to two smaller switches, or get an outlet in there.
------ Original Message --
From: &qu
i
979-985-5912
j...@brazoswifi.com
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke
Sent: Thursday, February 02, 2017 9:28 AM
To: Animal Farm
Subject: [AFMUG] POE-IN Powered Switch that will do 48 and 24V
Is there another POE-IN powered switch, ALA Edgepoin
Is there another POE-IN powered switch, ALA Edgepoint S16, that can do
both 48 and 24V output? I have a remote wiring closet with no power,
but want to put a switch there to power a couple VoIP Phones and ubnt
cameras. I'd like to power the switch and subsequent POE devices via 1
or 2 cat5 fe
Is there a way (http or command line) from the AP to boot an SM off and
force it to rescan? I have a couple sm's that have stopped responding,
but are still passing traffic. Normally I just Reboot the AP and when
they re-register everything is good. Is there a way to force the SM to
re-regis
It's been a couple years since I've installed a paging amplifier. I
have used the Cyberdata amplifiers before, is there anything
better/cheaper out there now? The Cyberdata one's are still like $400+
I'm looking to cover a smallish shipping department, so 1 speaker is
probably adequate.
Th
2017 at 8:44 PM, Nate Burke wrote:
I don't have any 5x radios in stock to test with. I didn't know if
pinouts/power requirements would be compatible.
I don't have any 5x radios in stock to test with. I didn't know if
pinouts/power requirements would be compatible.
16 tuners, 2 tuners, where do you get all this time? 16 tuners, figure
40 min/hour of actual content, every hour you're generating 10.6 hours
of things to watch?
On 1/27/2017 4:54 PM, Bill Prince wrote:
We must be somewhat pedestrian. I think 2 tuners is more than enough.
bp
On 1/27/2017
The boss has gone to always typing 'u' instead of 'you', Email, text and
Instant message, he does it everywhere. It's like nails on a chalkboard
whenever I see it. I realize that language is evolving
https://www.youtube.com/watch?v=mPV64Y2JfZY but this one just really
bothers me.
Am I missing something here? Even a Mikrotik HAP-AC is good for -4f to
150f Why do you need something special. Once it's acclimated to the
temperature, it really won't change will it?
On 1/19/2017 8:46 AM, Robert wrote:
Think how big the walk(drive) in freezer is for a major ice cream
manuf
It seems that recently over 50% of the installation calls I'm setting up
ask the question "Does someone need to be home when you come to
install?" Do the satellite or phone companies do installs with nobody
home now that has set this precedent? It just seems like a strange
question to ask for
It seems like more and more around here the Grain legs are owned by
someone who dosen't live there anymore. The farmer has found that
living in a condo and having someone else cut the grass and shovel the
snow is much easier, they just rent out the house. Sometimes it's held
in a Trust, and e
-Original Message- From: Nate Burke
Sent: Tuesday, January 10, 2017 1:34 PM
To: Animal Farm
Subject: [AFMUG] OT: Help Finding a Relay (Electrical)
I'm looking for a countdown relay. Where the relay will be energized
when a switch is thrown then continue to run for
I'm looking for a countdown relay. Where the relay will be energized
when a switch is thrown then continue to run for another 15 minutes once
the switch is turned off. I'm having trouble coming up with the right
search term to find it. Anyone know what I'm looking for?
in my experience.
On Tuesday, January 3, 2017 12:09 PM, Seth Mattinen
wrote:
On 1/3/17 11:12, Nate Burke wrote:
> I just happened to be at a property today where they were install a new
> smartmeter. The Tech confirmed that they do have the ability to cut to
> the power to the house
Sent: Tuesday, January 3, 2017 9:11 AM
To: af@afmug.com
Subject: Re: [AFMUG] Smartmeter Security question
I doubt it. Much more energy involved when a primary gets into a secondary.
Not short duration impulses like lightning.
-Original Message-
From: Nate Burke
Sent: Monday, January 02, 2
I'm not sure if everyone got home from vacation, or if they're just now
all using their toys, or if some big game update came out today, but
we're running above normal tonight. Started around 4:30 and seems to
just be increased usage across the board.
101 - 200 of 713 matches
Mail list logo
