Re: [AFMUG] ePMP part numbers

Hi Chuck, You are probably looking for C058900A112A which is the ePMP 1000 5 GHz Connectorized Radio with Sync. All the ePMP part numbers are available in the Release Notes. Here’s a link to the latest: https://support.cambiumnetworks.com/file/44f10cbaf696673e19da8eff3ad2ba8e20f05750 Thanks,

Re: [AFMUG] Spam:*******, Re: 2.5 or 5 Frame Question

900 MHz FSK is 5 ms. All other FSKs are 2.5 ms. Thanks, Sriram Join the Conversation Cambium Networks Community Forum From: Af > on behalf of Bill Prince >

Re: [AFMUG] The new 450 beta and TDWR

Hi Eric, It is currently supported on the 450i (AP/SM/BH) and 450 SM. We are planning to have it available on the 450 AP not in 14.1.2, but perhaps the next release. Thanks, Sriram Join the Conversation Cambium Networks Community Forum On Mar 17, 2016,

Re: [AFMUG] Baseball bat vs PTP 650

We would have but it would’ve turned into a 5 day test (match). Who has time for that. :) On Mar 14, 2016, at 4:29 PM, Eric Kuhnke > wrote: Now do this with a Cricket bat for your overseas market in ZA, IN, PK, BD, NZ, AU, UK... :-) On

Re: [AFMUG] Canopy 450 SNMP Bug

Hi Matt, Yes, the config import failure is due to the auth key. This bug has has been addressed in 14.1.2 which is currently available as a beta release. Regarding the 3.65 frequency setting on the SM, add an extra 0 to the frequency. So instead of: snmpset -v 2c -c Canopy 169.254.1.1

Re: [AFMUG] F/B Video on Cambium forum

Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ____ From: "Sriram Chaturvedi" <sriram.chaturv...@cambiumnetworks.com> To: af@afmug.com Sent: Tuesday, December 22, 2015 11:31:45 A

Re: [AFMUG] 450 900Mhz AP Power supply

Yup. The 5GHz and 900 MHz 450i AP, 450i BHM/BHS use: N00L034A POWER SUPPLY, 30W, 56V - GigE For the 900 SM, you can use the existing 450 power supply: N000900L001A Gigabit ENET Capable Power Supply (Same as the one for ePMP Sync AP and PMP 450). That said, the N00L034A is brand new and

Re: [AFMUG] 450i and the 5.4 band NOT usable in the USA?

Hi Sam, This is not a bug. 450i is not FCC approved for DFS bands, yet. It has been submitted to the FCC with full test results. We expect approval in early Q1 at which point we will unlock 5.4 band in the software. Thanks, Sriram On Dec 15, 2015, at 5:51 AM, Sam Lambie

Re: [AFMUG] Force 110

Dec 4, 2015, at 12:35 PM, Sriram Chaturvedi <sriram.chaturv...@cambiumnetworks.com<mailto:sriram.chaturv...@cambiumnetworks.com>> wrote: Hi Steve, We have been prioritizing radio performance over the GUI for a very long time. But, like Josh indicated, we made some incremental i

Re: [AFMUG] Force 110

Hi Steve, We have been prioritizing radio performance over the GUI for a very long time. But, like Josh indicated, we made some incremental improvements in GUI performance in 2.4 and 2.5 releases but we are fully aware its not enough. The team has been working on a wholesale rework of the GUI

Re: [AFMUG] ePMP: Integrated Radio VS Force 180

, Dec 2, 2015 at 3:10 PM, Sriram Chaturvedi <sriram.chaturv...@cambiumnetworks.com<mailto:sriram.chaturv...@cambiumnetworks.com>> wrote: Correct! We have a very old but reliable IBM mainframe in our lab that spits out these random numbers on a daily basis. These numbers then get sent

Re: [AFMUG] ePMP: Integrated Radio VS Force 180

Force 200 in 2.4 GHz is available today. Force 200 in 5 GHz will be available with our distributors late January. Josh - We’ll look into shortening the length of the model/part number to a nice round 20 digits :( Thanks, Sriram Join the Conversation Cambium Networks Community

Re: [AFMUG] ePMP: Integrated Radio VS Force 180

937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Dec 2, 2015 at 2:59 PM, Sriram Chaturvedi <sriram.chaturv...@cambiumnetworks.com<mailto:sriram.chaturv...@cambiumnetworks.com>> wrote: Force 200 in 2.4 GHz is available today. Force 200 in 5 GHz will be available with our di

Re: [AFMUG] Canopy 14.1.1 Release and PTP

450i AP will interop with 430 SMs. You don't need to swap the SMs out right away. Thanks, Sriram From: Af on behalf of Mark Radabaugh Sent: Saturday, November 28, 2015 8:24 AM To: af@afmug.com Subject: Re: [AFMUG]

Re: [AFMUG] Canopy 14.1.1 Release and PTP

AM, Chuck McCown <ch...@wbmfg.com> wrote: > > "right away" sounds ominous > > > -Original Message- From: Sriram Chaturvedi > Sent: Saturday, November 28, 2015 8:00 AM > To: af@afmug.com > Subject: Re: [AFMUG] Canopy 14.1.1 Release and PTP > >

Re: [AFMUG] Canopy 14.1.1 Release and PTP

nvert from 4 450’s with 90 degree sectors to 6 AP’s with 60 degree sectors. Most of these are already at 80-90% 450 SM’s. I was asking if I can go directly to 450i AP’s without having to finish collecting the 430’s. Mark > On Nov 28, 2015, at 11:35 AM, Sriram Chaturvedi &g

Re: [AFMUG] PMP450i 900MHz

Cown<mailto:ch...@wbmfg.com> Sent: Tuesday, November 24, 2015 10:13 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] PMP450i 900MHz When someone discovers the street price of this thing, please let me know. From: Sriram Chaturvedi<mailto:sriram.chaturv...@cambiumnetworks.co

Re: [AFMUG] PMP450i 900MHz

e as the 450 AP? From: Sriram Chaturvedi<mailto:sriram.chaturv...@cambiumnetworks.com> Sent: Wednesday, November 25, 2015 8:48 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] PMP450i 900MHz The "i" stands for "Industrial" due to the IP66/67 rating

Re: [AFMUG] PMP450i 900MHz

Yes they will. 900 MHz PMP 100 uses 5 ms frame so make sure the 900 MHz 450i also runs 5ms frame. From: Af on behalf of John Woodfield Sent: Wednesday, November 25, 2015 1:45 PM To: af@afmug.com Subject: Re:

Re: [AFMUG] PMP450i 900MHz

Hi Eric, Yes. We offer an official Cambium dual polarity yagi. More info here: http://www.cambiumnetworks.com/products/accessories/pmp450-900mhz-directional-antenna/

Re: [AFMUG] RF mapping planning

Hi Craig, There is an offline frame calculator available to configure ePMP and FSK for sync. It can be found here: https://support.cambiumnetworks.com/files/epmp/ and is titled "ePMP-PMP 100(FSK) Co-location Calculator”. With your FSK settings below you can sync with ePMP with the following

Re: [AFMUG] Epmp traffic shaping?

Hi , You can apply MIR limits to each SM (CPE) using RADIUS VSAs on ePMP. Thanks, Sriram Join the Conversation Cambium Networks Community Forumhttp://community.cambiumnetworks.com On Aug 25, 2015, at 6:49 AM, Mike Hammett af...@ics-il.netmailto:af...@ics-il.net wrote: To me what would be

Re: [AFMUG] Is anyone here doing ePTP at all?

FYI, A Beta release with 2.5ms frame support is available: http://community.cambiumnetworks.com/t5/ePMP-Beta/ePMP-Beta-Release-2-5-RC10-is-now-available/m-p/42702#U42702 It will be great to get some feedback on it. Thanks, Sriram From: Af

Re: [AFMUG] Dear Cambium: eAlign for Android

Paul, We just started working on it. I don’t have a date for you yet. Thanks, Sriram Join the Conversation Cambium Networks Community Forumhttp://community.cambiumnetworks.com On Jul 17, 2015, at 8:10 AM, Paul McCall pa...@pdmnet.netmailto:pa...@pdmnet.net wrote: Dear Cambium, When will

Re: [AFMUG] [WISPA Members] ePMP Model Numbers

Mike is correct. They are both 5 GHz Connectorized Radio with Sync. But: 011A is ROW (Rest Of the World) for sale/use in countries that do not follow FCC or ETSI regulations 112A is FCC for sale/use in countries that follow FCC regulations FYI, all the model numbers are listed in the ePMP

Re: [AFMUG] ePMP Release 2.4.3 is now available

Yes, the dashboard graph has been temporarily removed for this release. We’re working on improving UI performance on netbooks and smart phones. The graph is something that will have to be reworked as well. Thanks, Sriram Join the Conversation Cambium Networks Community

Re: [AFMUG] ePMP Release 2.4.3 is now available

Yes, agreed. We’ll update the Release Notes. Thanks for your support. On Jun 30, 2015, at 4:39 AM, CBB - Jay Fuller par...@cyberbroadband.netmailto:par...@cyberbroadband.net wrote: Good news! We'll take it! (but that should have been in the release notes ) : ) - Original Message -

Re: [AFMUG] Cambium System Release 13.4 Beta - Now Available!

Sam – Alignment tone will work in 13.4. Ignore the phase 1/phase 2 note. Those are Engineering notes that came out inadvertently :) It makes no difference to the user. Thanks, Sriram From: Sam Lambie Reply-To: af@afmug.commailto:af@afmug.com Date: Friday, April 17, 2015 at 10:40 AM To:

Re: [AFMUG] EPMP updates

Craig, ePMP does not have an auto update feature so it cannot pull updates on its own. A real person is doing this. Are you sure no one else has access to your radios? Do you have CNUT connected to these radios? Sriram On 4/8/15, 6:07 PM, Craig House cr...@totalhighspeed.net wrote: Does

Re: [AFMUG] epmp 2.4 stats.....not so good (was alignment help)

This is fixed in 2.4.1 which is now in Open Beta: http://community.cambiumnetworks.com/t5/ePMP-Beta/ePMP-Beta-Release-2-4-1-RC2-now-available/m-p/39608#U39608 Thanks, Sriram From: Af af-boun...@afmug.com on behalf of CBB - Jay Fuller

Re: [AFMUG] Epmp 2.4 bug - no ap list

Josh - Thanks for the constructive feedback. This is a bug on the backend statistics engine that broke a couple of things. AP list and SM bridge table (the one that George highlighted yesterday). It also causes the statistics page (Monitor-Performance) itself to have intermittent issues. We

Re: [AFMUG] ePMP Force 110 PTP

Correct. The video shows the Force 110 which uses the Unsync’d radio (identified by the two Ethernet ports). The Force 110 PTP comes with the Connectorized radio with Sync (single GigE port and GPS chip/connectors/antenna all included) but with a software tick (Thanks Josh. I’m using this going

Re: [AFMUG] Epmp leds for alignment in ptp config?

Hi, In Release 2.4 currently in Open Betahttp://community.cambiumnetworks.com/t5/ePMP-Beta/New-ePMP-Beta-Release-2-4-now-available/m-p/38345#U38345), the LEDs on the AP will indicate RSSI strength. There is also a new tool called eAlign (under Tools-eAlign) that provides a graphical

Re: [AFMUG] Epmp leds for alignment in ptp config?

-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 13, 2015 9:20 AM, Sriram Chaturvedi sriram.chaturv...@cambiumnetworks.commailto:sriram.chaturv...@cambiumnetworks.com wrote: Yes. And I will warn you right now that it acts a little quirky (the format) on mobile devices. It will work just fine

Re: [AFMUG] Epmp leds for alignment in ptp config?

To: af@afmug.com Subject: Re: [AFMUG] Epmp leds for alignment in ptp config? Oh my god. That's amazing. An alignment page?!?!?! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 13, 2015 9:09 AM, Sriram Chaturvedi sriram.chaturv

Re: [AFMUG] OT: Clearwire

you. We are going to be interviewing a guy who used to work for Clearwire and I need to brush up. On Jan 22, 2015, at 3:58 PM, Sriram Chaturvedi sriram.chaturv...@cambiumnetworks.commailto:sriram.chaturv...@cambiumnetworks.com wrote: Motorola for both Access Network (AP/BS) and ASN-Gateway

Re: [AFMUG] OT: Clearwire

Motorola for both Access Network (AP/BS) and ASN-Gateway. And a mix of Redback (now Ericsson) and Starent (now Cisco) for the Home Agent, AAA etc. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett Sent: Thursday, January 22, 2015 4:47 PM To: af@afmug.com Subject: Re: [AFMUG] OT:

Re: [AFMUG] Canopy to Epmp migration path adapter?

You can put that rumor to rest because it’s not true. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Wednesday, January 21, 2015 5:30 PM To: af@afmug.com; Jason McKemie Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? That's a rumor I have heard as well. On

Re: [AFMUG] Canopy to Epmp migration path adapter?

. ___ Tyler Treat Corn Belt Technologies, Inc. tyler.tr...@cornbelttech.commailto:tyler.tr...@cornbelttech.com ___ On Jan 21, 2015, at 5:58 PM, Sriram Chaturvedi sriram.chaturv...@cambiumnetworks.commailto:sriram.chaturv...@cambiumnetworks.com wrote: You can put

Re: [AFMUG] Canopy to Epmp migration path adapter?

- From: Sriram Chaturvedi sriram.chaturv...@cambiumnetworks.com Sent: Wednesday, January 21, 2015 9:55pm To: af@afmug.com af@afmug.com Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Wow. I stepped away for a couple of hours and this escalated pretty quickly. Mike

Re: [AFMUG] Canopy to Epmp migration path adapter?

@afmug.com Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Sri, Slow on my tablet and phone as well. I feel it should be faster on my PC and laptop. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 21, 2015 10:07 PM, Sriram Chaturvedi

Re: [AFMUG] Canopy to Epmp migration path adapter?

Intelligent Computing Solutions http://www.ics-il.com From: Sriram Chaturvedi sriram.chaturv...@cambiumnetworks.com To: af@afmug.com Sent: Wednesday, January 21, 2015 6:16:27 PM Subject: Re: [AFMUG] Canopy to Epmp migration path adapter? Really? First time I'm hearing

Re: [AFMUG] Epmp recovery?

Hi TJ, What state is the SM in right now? Does it boot up on the older load? Have you tried a factory reset yet? What was the upgrade failure? Was it the GUI indicating an upgrade failure during a normal upgrade or did you have some sort of a power failure during the upgrade? Are you able to

Re: [AFMUG] ePMP SA

Af af@afmug.com wrote: So what are they doing today... If mean, if you are really serious... -Original Message- From: Sriram Chaturvedi via Af Sent: Thursday, November 27, 2014 12:53 AM To: Ken Hohhof via Af Subject: Re: [AFMUG] ePMP SA Congrats on your first ePMPs, George

Re: [AFMUG] ePMP SA

Congrats on your first ePMPs, George! SA in the GUI is in our plan but there's a lot going on already in terms of adding functionality into the releases. So hopefully it will be soon. We've already implemented ACS (under Tools-ACS) so the SA will simply be an extension of it. Just need the

Re: [AFMUG] ePMP Force

No it cannot. It uses the CSM (Connectorized Module without sync). You will have to swap it out with the GPS module to do any kind of sync. Thanks, Sriram From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini via Af Sent: Monday, November 24, 2014 7:37 AM To: af@afmug.com Subject:

Re: [AFMUG] ePMP Force

Hi, Please allow me to clarify. The Force 110 uses the Connectorized UnSync'd unit with the two 10/100 FE ports. The Force 110 PTP uses the Connectorized GPS Sync'd unit with the single GigE port that supports 802.3af PoE in addition to proprietary PoE. GPS capabilities will be disabled

Re: [AFMUG] ePMP Software 2.3

Gilbert, Do you have the support case number handy? I will follow up internally on this issue and get back to you. Thanks, Sriram From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gilbert T. Gutierrez, Jr. via Af Sent: Monday, November 03, 2014 10:09 AM To: af@afmug.com Subject: Re: [AFMUG]

Re: [AFMUG] ePMP feature

Steve, Yes, we are considering doing a point release to 2.3 to add this support. Thanks, Sriram From: Af [mailto:af-boun...@afmug.com] On Behalf Of Wireless Admin via Af Sent: Tuesday, October 28, 2014 4:12 PM To: af@afmug.com Subject: [AFMUG] ePMP feature Anyone know when Cambium is going to

Re: [AFMUG] PMP450 3.65

Hi Dan - Absolutely Yes. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Dan Petermann via Af Sent: Friday, October 10, 2014 2:56 PM To: af@afmug.com Subject: [AFMUG] PMP450 3.65 Can these be run in a 20MHz channel width, 4 APs to a tower, with frequency reuse of

Re: [AFMUG] PMP450 3.65

, 2014 3:11 PM To: af@afmug.com Subject: Re: [AFMUG] PMP450 3.65 Do you if there's plans for a 15mhz mode so 6APs per tower can be done with more speed than the 10mhz mode? On Fri, Oct 10, 2014 at 3:08 PM, Sriram Chaturvedi via Af af@afmug.commailto:af@afmug.com wrote: Hi Dan - Absolutely Yes

Re: [AFMUG] New ePMP Beta Software 2.3-RC10 available!

] On Behalf Of Sriram Chaturvedi via Af Sent: Wednesday, October 08, 2014 7:09 PM To: af@afmug.commailto:af@afmug.com Subject: [AFMUG] New ePMP Beta Software 2.3-RC10 available! Folks, ePMP Beta software 2.3-RC10 is now available for download here: https://support.cambiumnetworks.com/files/epmp

Re: [AFMUG] New ePMP Beta Software 2.3-RC10 available!

to an AP for a set amount of time, it loads the other config and tries that, and goes back and forth until it locks on. On Thu, Oct 9, 2014 at 9:20 AM, Sriram Chaturvedi via Af af@afmug.commailto:af@afmug.com wrote: Shayne, It doesn’t do that automatically. You have to explicitly configure the SM

Re: [AFMUG] ePMP on 2.2, run remote spectrum, can't get back in...

Hi, I looked into this with Matt, so here's the update on the issue. Matt had previously configured this radio as an SM in NAT mode which configures the radio with separate WAN and LAN IP addresses. When he switched it to an AP, there is only one IP address which is the bridge IP (WAN IP

[AFMUG] New ePMP Beta Software 2.3-RC10 available!

Folks, ePMP Beta software 2.3-RC10 is now available for download here: https://support.cambiumnetworks.com/files/epmp System Release 2.3 adds the following features: * 5 MHz and 10 MHz channel bandwidth support o Max number of subscribers is limited to 30 for 5MHz and 60 for 10 MHz

Re: [AFMUG] 450 3.65 SNMP Default Frequencies

Hi, There is no SNMP support to push the Default Frequencies button, yet. Like Joe pointed out, the OIDs below will allow you to populate the list with a single set command. Also, all new radios out of the box will have the default list populated (or when you factory default them). Please

Re: [AFMUG] 450 3.65 SNMP Default Frequencies

. Much faster and less error prone then going through the web interface. On Tue, Oct 7, 2014 at 1:38 PM, Sriram Chaturvedi via Af af@afmug.com wrote: Hi Matt, The length of the OID string is limited to 128 characters (commas included). The string you have below is 118 characters, so it's odd

Re: [AFMUG] Cambium Newbie Question

Hi Adam, There may have been a miscommunication. Sorry for the confusion. Thanks, Sriram -Original Message- From: Af [mailto:af-bounces+sriram.chaturvedi=cambiumnetworks@afmug.com] On Behalf Of Adam Moffett via Af Sent: Friday, September 26, 2014 9:21 AM To: af@afmug.com Subject:

Re: [AFMUG] Cambium Newbie Question

Hi, Yes, the GPS chip comes with an internal patch antenna. The internal patch antenna is automatically disabled once you connect the external GPS antenna (and auto enables when you disconnect the external antenna). If you think the radio itself doesn't have clear LOS to the sky, then you can