Re: [AFMUG] Epmp vs 450 - DFS events

​For ePMP it depends on the version number. 2.6.2.1 had very stable DFS performance and for APs where we saw issues, we have left it there. Some links are working fine on the latest firmware though.​ On Wed, May 30, 2018 at 3:50 PM, George Skorup wrote: > My experience is exactly the opposite

Re: [AFMUG] OT: One space versus two spaces (again)

I was raised on two spaces as well. But after finding out that the "correct" modern way is one space, I've switched. I do agree with the tabs/spaces thing when coding. On Sun, May 6, 2018 at 10:25 PM, Robert wrote: > Trivial stuff, the real meat is tabs versus spaces

[AFMUG] Aruba Captive Portal

Has anyone setup a captive portal for an Aruba network? How easy and pricey is it to do? Not asking about 3rd party solutions, just if it is built into their controllers and how easy it is to implement.

Re: [AFMUG] Did I ruin summer animal farm?

I was lazy about it too but mostly because summer is our busy season. On Fri, Apr 13, 2018 at 9:06 AM, Chuck McCown wrote: > No, just too low a turnout (single digit) to attract sponsors. Might give > it a go later in the year, > > Sent from my iPhone > > > On Apr 12, 2018, at

Re: [AFMUG] Mikrotik OSPF Refresher

You want to set redistribute default route to if installed on your BGP routers and never everywhere else. No should be selected for redistributing all other routes except OSPF. Then go into networks and explicitly add what you want advertised. For example, if you do PPPoE, you don't want a

Re: [AFMUG] OT one more for the borg

I drove by a lot yesterday that looked about as secure as you could get. It looked like not much inside but maybe so vehicle parking and junk vehicles. However, it had two rows of chain link fence separated by circular razor wire in between and on the tops of the fence. While it did seem to be a

Re: [AFMUG] OT Asterisk

I would just use one interface and put a VLAN on it for private phone traffic. On Thu, Apr 5, 2018 at 8:19 AM, Faisal Imtiaz wrote: > Yes. > > Faisal Imtiaz > Snappy Internet & Telecom > http://www.snappytelecom.net > > Tel: 305 663 5518 x 232 > > Help-desk:

Re: [AFMUG] site inverter +48

We use these and have been very happy with them: http://www.ict-power.com/product/dc-ac-pure-sine-wave-power-inverters/ The 300W does have a 3 second 600W overload cutoff. On Wed, Mar 28, 2018 at 6:52 AM, Brian Kelly wrote: > Most of our sites are 24/48VDC, but use

Re: [AFMUG] GPS antennas

N would be my vote. On Tue, Mar 27, 2018 at 9:56 PM, Jon Langeler wrote: > N type is always a no brainer. RP-SMA also > > Jon Langeler > Michwave Technologies, Inc. > > > On Mar 27, 2018, at 9:39 PM, Chuck McCown wrote: > > What kind of GPS antennas

Re: [AFMUG] test (list lag time)

​Are the servers Irish? Maybe they were drinking and now that the hangover is worn off they have finally mustered enough strength to send out your message to the list.​ On Tue, Mar 20, 2018 at 12:58 PM, Chuck McCown wrote: > Posted Saturday March 17 9:21 MDT >

Re: [AFMUG] Require Recent Web Browser?

You are selling a product to technology folks. Requiring the latest browser shouldn't be an issue. Although, I'm sure they are some WISPs still running their business on XP. On Wed, Mar 14, 2018 at 7:49 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote: > A bit of a survey

Re: [AFMUG] Extended temperature range PC's

Make sure to select the wide-temp option on memory and I think SSDs. On Wed, Feb 28, 2018 at 3:36 PM, Adam Moffett <dmmoff...@gmail.com> wrote: > Paul, I really like the options available on this one. Thanks much. > > > -- Original Message -- > From: "can.

Re: [AFMUG] Extended temperature range PC's

www.logicsupply.com/products/rugged-computers/ They run on 12V-24V DC as well. On Wed, Feb 28, 2018 at 2:28 AM, Rory Conaway wrote: > I just bought one off eBay. I’d check there first if price sensitive. > > > > Rory > > > > *From:* Af [mailto:af-boun...@afmug.com]

Re: [AFMUG] Best budget cat5 for tower sites?

Shireen cable has never let us down. $175/box and has HDPE shell. https://www.shireeninc.com/osc/dc-1021-outdoor-cat5e-ftp-shielded-1000ft-spool On Tue, Feb 27, 2018 at 8:30 AM, Jon Langeler wrote: > Who’s got the best budget cat5 these days that at least has hdpe or

Re: [AFMUG] OT VPN over PPPOE

I would try to reproduce the problem first. Could be an MTU issue on the VPN setting. On Mon, Feb 26, 2018 at 7:06 PM, Chuck McCown wrote: > Had a customer that works from home. Could not make his VPN work. > We thought perhaps it was a port issue. Opened the ports on the

Re: [AFMUG] POE Fuse ...

So for a Netonix, do we just need the fuse or do we need the surge arrestor card as well? On Wed, Feb 14, 2018 at 10:41 AM, TJ Trout wrote: > per chuck they must be fueses to protect a netonix, anything else was too > slow. > > On Wed, Feb 14, 2018 at 7:34 AM, Adam Moffett

[AFMUG] Smart Electric Submeter

We have a site looking to see what our electrical usage is each month. Do anyone know an affordable submeter that will give monthly reports?

Re: [AFMUG] Dc plant conversion

It's a little spendy but about how about 1 $670 option? Alpha Cordex PSU 24V 400W. Remote monitoring, e-mailed alerts, swappable rectifier, DIN mount, etc. Add a Netonix switch and you can power just about anything.​ On Fri, Jan 26, 2018 at 8:49 PM, Steve Jones wrote:

Re: [AFMUG] PC Out of Band management

You could get an IP KVM for a single PC. On Mon, Jan 15, 2018 at 10:33 AM, Steve Jones wrote: > dual NICs with teamviewer is what i use to manage our office rack > > On Mon, Jan 15, 2018 at 9:25 AM, Josh Reynolds > wrote: > >> This sounds like a

Re: [AFMUG] survey results

... it could be > especially useful now that there are cheap 11ghz radios out there. > > On Thu, Dec 28, 2017 at 12:35 PM, can...@believewireless.net < > p...@believewireless.net> wrote: > >> I would ask, "Who are your customers?" I buy your products beca

Re: [AFMUG] survey results

I would ask, "Who are your customers?" I buy your products because you sell them and you support our industry. In the past, when you were selling licensed dishes, I would reach out to a coordinator and tell them I would want to use your dish and a certain radio. If I was told I needed to use

Re: [AFMUG] 2018

Sometimes MSRP is fine if we can get Prime shipping or an affordable next day option. If we can order an item for MSRP with just a few clicks, it may be as cost effective as calling a distributor, seeing if they have inventory, finding out that McCown will actually be dropping shipping it from the

Re: [AFMUG] 2018

Done. On Thu, Dec 28, 2017 at 10:56 AM, wrote: > https://www.surveymonkey.com/r/9SQGH67 > > > Hmmm, what is the difference between a clickable link and non clickable? > > *From:* ch...@wbmfg.com > *Sent:* Thursday, December 28, 2017 8:53 AM > *To:* af@afmug.com > *Subject:*

Re: [AFMUG] DirecTV Now DVR

> > David Coudron > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of * > can...@believewireless.net > *Sent:* Sunday, December 24, 2017 11:53 AM > *To:* af@afmug.com > *Subject:* [AFMUG] DirecTV Now DVR > > > > So I just accepted the offer

[AFMUG] DirecTV Now DVR

So I just accepted the offer to beta test the DirecTV Now DVR feature and updated guide. It doesn't work on Roku but does work on the Apple TV they gave me when I signed up. I don't have time to play with it today but I'll probably schedule some shows to record tomorrow to play with it. I did

Re: [AFMUG] Full erection..

I think that guy is on a watch list. On Thu, Dec 7, 2017 at 1:04 PM, Jaime Solorza wrote: > > > Jaime Solorza > > On Dec 7, 2017 12:00 PM, "Jaime Solorza" > wrote: > >> Insha allah >> >> Jaime Solorza >> >> On Dec 7, 2017 11:56 AM, "Robert"

Re: [AFMUG] GPS visible vs tracked

Check 900MHz noise. We have two sites with high 900MHz noise and those are the ones that have GPS issues. On Fri, Dec 1, 2017 at 10:30 AM, Wireless Administrator wrote: > Ok …… > I got it now. This was a test.(Tongue-in-cheek)Answer: “It radiation > from a nearby star”Steve

Re: [AFMUG] converting AC devices to DC

​Depends on the device. For smaller computers, we just used the DC ATX power supplies. However, for bigger servers/routers, we used the ICT AC-DC converters: http://www.ict-power.com/product/dc-ac-pure-sine-wave-power-inverters/​ On Thu, Nov 16, 2017 at 12:30 PM, Steve Jones

Re: [AFMUG] Handhole hook

You feel like opening up handholes while on road trips? On Sun, Nov 12, 2017 at 12:05 PM, Chuck McCown wrote: > On a road trip today and realized I left my hand hole hook behind. > Went to a Flying J truck stop and got a 5th wheel pin checker. Opened the > hook a bit and it is

Re: [AFMUG] IPArchitechs

We used them once and we weren't happy. I wanted to give them a try to see how they compared to others. What I thought was a simple BGP issue that could have been handled with a 15-30 minute phone call ended up taking over two weeks. They "needed" to get our router configs and virtualize them in

Re: [AFMUG] ATA CallerID question

The outbound CID should be set in the PBX, not the ATA. On Tue, Nov 7, 2017 at 3:58 PM, Nate Burke wrote: > At a customer, I just hooked up a Cisco SPA122 into an Ancient Lucent PBX > system. The customer says that caller ID is not coming through, but it > used to work with

Re: [AFMUG] ePMP CnMaestro URL via Option 43

Yes, working fine for us: /ip dhcp-server option add code=43 name=cnMaestro value="'https://X.X.X.X'" On Mon, Nov 6, 2017 at 3:51 PM, Adam Moffett wrote: > Is anybody successfully setting the CnMaestro URL via Option 43 on ePMP? > > I've set up a Mikrotik DHCP server in

Re: [AFMUG] Long range cameras

Where did you find them for that price, Jaime? On Sat, Nov 4, 2017 at 12:56 AM, Rory Conaway wrote: > That’s a great price. I looked online and they were much higher. > > > > Rory > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza > *Sent:*

Re: [AFMUG] IPv6 for management

I don't think we'd use it for management on our equipment. I think sticking with v4 for it's simplicity is better. Much easier to remember a v4 private address space over a v6 address. Once we get over a couple billion devices, I'm sure we'll reconsider. On Thu, Oct 19, 2017 at 7:22 PM, Seth

Re: [AFMUG] Cabinets with AC and heat

I've never received a quote from them either. Pestered them for months and they never quoted me. On Thu, Oct 19, 2017 at 8:54 AM, Adair Winter wrote: > Who have you been talking to? That's never been my experience. > > On Oct 19, 2017 1:18 AM, "Lewis Bergman"

Re: [AFMUG] Prototype #2:

The version made out of ground chicken is good as well. http://sassysouthernyankee.com/2014/02/chicken-pizza-crust/ However, you have to be careful if you are Keto as it will put you over on protein if you have too many slices. On Mon, Oct 16, 2017 at 2:25 PM, Chuck McCown

Re: [AFMUG] Collection agency

We have a local attorney that does it for us and it doesn't cost us any money. He takes a 1/3 but it gets charged back to the customer in the end. It's been pretty painless for us. On Tue, Sep 26, 2017 at 1:02 PM, Mike Hammett wrote: > Do you even PowerCode, bro? > > > ;-) > >

Re: [AFMUG] Latest Control Panel

Amazing work. On Thu, Sep 21, 2017 at 6:15 PM, Jaime Solorza wrote: > This will be the master control panel for the solar powered ones I shared > the other day... the transformer on bottom right will convert 480 down to > 120. I also tested solar panel set up to

Re: [AFMUG] easy backup link failover

Depends on your layout, but you could also bond them together in failover mode. Then no OSPF timeout hit.​ On Mon, Sep 4, 2017 at 11:52 AM, Kurt Fankhauser wrote: > OSPF cost for backup route definitely needs to be higher... you can > standardize all you want on some

Re: [AFMUG] EPMP "SW Update is running!"

Make sure to reboot it before upgrading it too. On Thu, Aug 31, 2017 at 12:20 PM, can...@believewireless.net < p...@believewireless.net> wrote: > Have you tried updating it from the web interface? > > On Thu, Aug 31, 2017 at 12:02 PM, Steve Jones <thatoneguyst...@gmail.com>

Re: [AFMUG] EPMP "SW Update is running!"

Have you tried updating it from the web interface? On Thu, Aug 31, 2017 at 12:02 PM, Steve Jones wrote: > Anybody come across this, we have a 3.2.1 that wont update, Cnmaestro > either skips it saying update in progress or unit offline > loading from the gui fails

Re: [AFMUG] DC Generators?

Someone posted this a while ago: http://www.ebay.com/itm/New-2-IN-1-Gas-Gasoline-Generator-3000W-DC-OUTPUT-24V-for-pure-power-inverter-/252041630986?hash=item3aaeda150a I think they make them in 12,24 and 48V. On Wed, Aug 30, 2017 at 2:41 PM, Gino A. Villarini wrote: >

Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for New Equipment

I really don't know where this fits in. Who wants to keep three radios on the truck? If they could have made the same design for say a 27db antenna, that would be something we'd use. On Wed, Aug 30, 2017 at 1:53 PM, Mathew Howard wrote: > No, we'll probably keep using the

Re: [AFMUG] Ubiquiti uFiber

Funny, I was just testing a VLAN and it didn't work. Was about to dig more into it but I'm guessing it's just not working. On Fri, Aug 11, 2017 at 12:40 PM, Chris Fabien wrote: > We have one bought from the beta store. The MSRP on the OLT is $1499. > > I have not been able

Re: [AFMUG] Great portable propane generator

​I'm pretty sure you need to change the oil every 20 hours. ​ On Thu, Aug 3, 2017 at 2:08 PM, Robert Andrews wrote: > Did you buy it with propane, or is it the kit, like on amazon? > > > On 08/03/2017 11:05 AM, Steve Jones wrote: > >> We have a smaller one that started

Re: [AFMUG] Magnets on a warm summer day

th a slot in the end. Put threaded > holes in the plate. You use a screw driver to adjust the magnet to plate > and a lock nut to secure it once it is set. I would rather have a nut on > the other side of the plate but hard to get a wrench into the center areas > of a plate of any

Re: [AFMUG] Magnets on a warm summer day

o flex a bit? > Seems difficult to adjust magnet nuts in the center of the array as they > would be under the mounting plate, right? > > *From:* can...@believewireless.net > *Sent:* Monday, July 31, 2017 11:17 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Magnets on

Re: [AFMUG] Magnets on a warm summer day

We followed the Magnemount design and took a typical 5'x5' non-pen and drilled holes in it and put a lot of magnets on it. The magnets had pretty long bolts on them so we used that to adjust each magnet so it would still sit flat on a curved surface. It's been holding a 2ft dish just fine for a

Re: [AFMUG] Explosion Proof Access Point

nd they have IS tablets they use to keep track of work > orders and lockouts and such. Most still use paper tickets though. > > On Wed, Jul 26, 2017 at 2:57 PM can...@believewireless.net < > p...@believewireless.net> wrote: > >> Customer requested it. But I'm guessing phones, t

Re: [AFMUG] Explosion Proof Access Point

On 7/26/2017 1:00 PM, can...@believewireless.net wrote: > > It is for WiFi. > > On Wed, Jul 26, 2017 at 1:58 PM, George Skorup <george.sko...@cbcast.com> > wrote: > >> Yeah, there's the ATEX/HAZLOC certified versions of the 5GHz 450i stuff. >> Unless he was aski

Re: [AFMUG] Explosion Proof Access Point

s, or shouldn't be. > > > On 7/26/2017 12:42 PM, Sean Heskett wrote: > > canopy 450i > > > On Wed, Jul 26, 2017 at 8:24 AM, can...@believewireless.net < > p...@believewireless.net> wrote: > >> Looking for an explosion proof access point for a natural gas fueling >> station. Any recommendations? >> > > >

[AFMUG] Explosion Proof Access Point

Looking for an explosion proof access point for a natural gas fueling station. Any recommendations?

[AFMUG] Old PMP100 Cases

Can they be recycled?

Re: [AFMUG] Epmp 2000 to Epmp1000 Sector Bracket?

​On towers I know it can be a pain, but it's worth upgrading to the new beamforming sectors.​ On Wed, Jul 12, 2017 at 12:46 PM, Mike Hammett wrote: > I complained to Cambium, but they didn't care. They were going to try to > talk to RF Elements about an adapter. > > > > -

Re: [AFMUG] Tech’s condition is stable after he allegedly rode guy wire down

Chuck, you need Hollywood to make a movie of your life. We'll call it a comedy... But I'm sure there is a ton of drama. On Sun, Jul 9, 2017 at 4:16 PM, wrote: > I was on the ground once in a situation like that. The tower would start > hissing, then a nearby strike would hit

Re: [AFMUG] Ot: irritating the old lady

+1 On Thu, Jul 6, 2017 at 8:22 PM, Chuck McCown wrote: > Looks like a normal living to me. > > *From:* Steve Jones > *Sent:* Thursday, July 06, 2017 6:05 PM > *To:* af@afmug.com > *Subject:* [AFMUG] Ot: irritating the old lady > > As it turns out, this does not impress them to

Re: [AFMUG] So Silicon Valley WISP startup gets $7M investment?

Years ago there was a product called, from what I remember, ClearMesh that was very cool. It had 3 FSO links built into that automatically tracked and found new mesh sites. It had an ethernet port that could be fed fiber or to a customer. Range was something like 200M and cost ~$7,000 each. Could

Re: [AFMUG] mikrotik arp and 192.168.x.x

Are you redistributing connected and/or static routes by chance? On Tue, Jun 13, 2017 at 4:40 PM, Steve Jones wrote: > I don't know if this is normal to see or what. I cant figure it out > We have sites that are all isolated by mikrotiks and use ospf between them > >

Re: [AFMUG] Alpha UPS AC Input Breaker Open

I've been really impressed with Alpha's support. On Tue, Jun 13, 2017 at 3:22 PM, Sterling Jacobson wrote: > Yeah, I manually turned on the inverter and left the input breaker > tripped/off and it ran on battery for about 2 hours until I went and > flipped the input

Re: [AFMUG] Fwd: Notice - Removal of "supp...@cambiumnetworks.com" Email

Yeah, not happy about it. E-mail is my preferred method of support. On Thu, Jun 8, 2017 at 8:12 AM, Mike Hammett wrote: > Anyone else miffed by this? > > > > - > Mike Hammett > Intelligent Computing Solutions > >

Re: [AFMUG] Cheap Outdoor Dual-Band WiFi Client?

Thanks, that's what I purchased. Should arrive today. On Thu, Jun 8, 2017 at 8:24 AM, Christopher Gray <cg...@graytechsoftware.com > wrote: > MikroTik wAP ac should do it: > https://routerboard.com/RBwAPG-5HacT2HnD > > > -- > > On Tue,

Re: [AFMUG] Cheap Outdoor Dual-Band WiFi Client?

:af-boun...@afmug.com] *On Behalf Of * > can...@believewireless.net > *Sent:* Tuesday, June 6, 2017 11:01 AM > *To:* af@afmug.com > *Subject:* [AFMUG] Cheap Outdoor Dual-Band WiFi Client? > > > > Anyone know of a cheap, dual-band wifi client that can be mounted outdoors? >

[AFMUG] Cheap Outdoor Dual-Band WiFi Client?

Anyone know of a cheap, dual-band wifi client that can be mounted outdoors?

Re: [AFMUG] IP Architects

I noticed the same thing. Not happy at all. On Thu, Jun 1, 2017 at 11:53 AM, Sterling Jacobson wrote: > So far, not so good with them. > > I've spent about $340 for an hour and a half time to have them modify one > temporary route rule in fifteen seconds. > Rest of the

Re: [AFMUG] OT: aging and shouldas

Buy a battery powered mower... even though mine was just recalled. On Sat, May 27, 2017 at 10:25 AM, Mark Radabaugh wrote: > Absolutely not worth the money but some of the active noise canceling > headsets are amazing, particularly the aviation ones. This thing is > amazing:

Re: [AFMUG] Exclusive Marketing Agreements

This was years ago but one apartment owner with ~50 units was getting $8000 plus free Internet and TV for the office. I don't remember if the $8k was every year or every couple of years. On Fri, May 26, 2017 at 11:08 AM, Mike Hammett wrote: > Any idea what companies like

Re: [AFMUG] Would you like some porn with your shopping?

ot; <ch...@velociter.net> wrote: > >> This is delicious. If you’re on reddit, please post on >> /r/talesfromtechsupport for that sweet karma. >> >> >> >> Chris Wright >> >> Network Administrator >> >> >> >> *From:* Af [mailt

Re: [AFMUG] Would you like some porn with your shopping?

>> Asshats always get in the way of real progress. >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of * >> can...@believewireless.net >> *Sent:* Thursday, May 18, 2017 11:18 AM >> *To:* af@afmug.com >> *Subject:* [AFMUG] Would you lik

[AFMUG] Would you like some porn with your shopping?

A customer of mine decided they needed some digital displays for their mall. As part of the deal, they decided to replace our Internet ($500/month) with a fiber circuit ($2,500/month)... because we were "too expensive" and redo the WiFi we installed for something like $50k because there were a

Re: [AFMUG] ServerPlus

https://www.youtube.com/watch?v=dsx2vdn7gpY On Wed, May 10, 2017 at 11:30 AM, Josh Luthman wrote: > No that's "ServerPlus is all over, IT'S ALL OVER MAN!!!" > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100

Re: [AFMUG] rb1100ahx2 bgp load

Take a look at /tool profile (on in Winbox) to see where the CPU load is going. It is probably going to routing for BGP but you can verify it here. Is anything else running on the router? OSPF, VPN, PPPoE, etc? Where BGP really matters is when you lose one of your peers and it goes through and

Re: [AFMUG] Tower Recommenations

enations > > > You need to have them engineered no matter Whitlock oor you buy. They Will > do it for free. I bought a 300' last week. > > No matter how big the dish is all three mentioned can design a tower to > handle it. > > On Sat, May 6, 2017, 5:37 PM can...@

Re: [AFMUG] Tower Recommenations

017 04:51 PM, Lewis Bergman wrote: > > I have built Valmont, Pirod, and Sabre all several times. I like Sabre > better than any of them. They go together better and I like the design > better. Especially compared to Valmont SS flanges. They really stack well. > >

Re: [AFMUG] Tower Recommenations

n. But more > money. Much larger foundation. But no guys and guy anchors to worry about > over the years. > > *From:* can...@believewireless.net > *Sent:* Saturday, May 06, 2017 2:23 PM > *To:* af@afmug.com > *Subject:* [AFMUG] Tower Recommenations > > We are looking at

[AFMUG] Tower Recommenations

We are looking at a location where we would need to erect a tower to hold at least two 6ft dishes at 130ft. What type of tower(s) would you guys recommend?​

Re: [AFMUG] OT Pissed off PhD

I had an astronomy professor in college and we got to the part where we talked about the theories on how the universe was created. Obviously the one that has the most "compelling concrete evidence" is the big bang theory. So we are told that the universe started with hydrogen and helium. then

Re: [AFMUG] "blowing conduit"

$8/ft urban?!?! Seems extremely low to me. On Wed, Apr 26, 2017 at 9:41 AM, Chuck McCown wrote: > Looks a bit low to me. > > *From:* Josh Reynolds > *Sent:* Wednesday, April 26, 2017 7:39 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] "blowing conduit" > > > > - Josh > > On

Re: [AFMUG] POE Port Protection

APC +1 Add fusing to the surge protector +100 On Mon, Apr 24, 2017 at 7:55 PM, Jeremy wrote: > Add fusing to the surge protector +100 > > On Mon, Apr 24, 2017 at 5:53 PM, Jeremy wrote: > >> APC form Factor +1 >> >> On Mon, Apr 24, 2017 at 4:48

Re: [AFMUG] ePMP v3.3

The DFS bug was in relation to 40 MHz channels where it would see false positives. It does appear to be fixed in 3.3. On Tue, Apr 18, 2017 at 5:35 PM, Mathew Howard wrote: > Yes, it's very much more better in 3.3. All of the XM radios we have left > have been pretty stable

Re: [AFMUG] Mikrotik Vlan

Depending on the interface, the bridge will have more performance issues than the vlans. On Thu, Apr 13, 2017 at 9:44 AM, Dave wrote: > Ok, > Some more fun with vlans, I want to know are there any issues with having > multiple vlans on a bridge in routerOS? > > I have been

Re: [AFMUG] mimosa

I prefer the AF11 to the B11 and am thinking of replacing the B11 with the AF11 as well. On Thu, Apr 13, 2017 at 7:37 AM, Mike Hammett wrote: > The web site will send your information over to Liz, though, IIRC. > > > > - > Mike Hammett > Intelligent Computing Solutions

Re: [AFMUG] 4 Port ATA ?

​We had horrible luck with that device. We ended up swapping them for two 2-port ATAs.​ On Fri, Apr 7, 2017 at 4:39 PM, Paul McCall wrote: > Anybody had good success with a 4 port ATA such as … > https://www.amazon.com/Grandstream-GS-HT704-Analog-Telephone-Adapter/dp/ >

Re: [AFMUG] Strange OSPF problem

Is the customer connecting via PPPoE? That would generate a /32 route that is being advertised. On Fri, Mar 31, 2017 at 1:27 PM, Adam Moffett wrote: > Any routing marks involved? Any mangle or firewall rules which would > match this customer and not others? > > When you're

Re: [AFMUG] Semi OT: Selling web browsing history

I find it funny these people are taking to Facebook about this... adding another piece of data Facebook can track and sell. On Wed, Mar 29, 2017 at 7:23 PM, wrote: > Yeah, it was never intended to cover us. It really was intended to keep > the big boys from blocking competing

Re: [AFMUG] Fw: Netonix

So we should now bypass all our APC-type surge suppressors that are connected to Netonix? On Fri, Mar 24, 2017 at 11:26 PM, Chuck McCown wrote: > I am going to fix this little problem... > > Netonix will fix your port for something like $25 > > *From:* Bill Prince > *Sent:*

Re: [AFMUG] IPArchitects - feedback

speak out of turn, but I think you have to buy a minimum > block of time, like 10 hrs if I remember right. I don't think the time > expires so if you have an issue that only takes 2 hrs, then you still get > your remaining hours to use if you have another issue later. > > > >

Re: [AFMUG] IPArchitects - feedback

I'll gladly pay more to get the correct answer quickly, then pay someone "less" wasting time looking for the answer. On Wed, Mar 22, 2017 at 1:15 PM, Chris Wright wrote: > We’ve used them in the past. They are as capable as they are expensive. > > > > Chris Wright > >

Re: [AFMUG] OT Tesla

I highly doubt people were just buying the 75 as they say. Think this will hurt sales? They already did this to the Model X. Or are they hoping the Model 3 will fill the gap? On Sat, Mar 18, 2017 at 11:33 AM, Chuck McCown wrote: > Interesting note from Tesla this morning: > >

Re: [AFMUG] Weird Mikrotik issue

Remember having this happen years ago. Can't remember if it required a reboot or upgrade to fix. Also, try it via CLI if you are using Winbox. On Tue, Mar 7, 2017 at 4:28 PM, Andreas Wiatowski wrote: > We have one router that can’t seem to get a password to stick in a

Re: [AFMUG] AF24 and Edgepoint Slow Speed in 1 Direction

Check all of your MTU settings. If you are using jumbo frames, make sure the MTU is set in the routers, switch and in the AF24s as well. On Tue, Feb 28, 2017 at 6:39 PM, Nate Burke wrote: > Now I'm starting to really get confused. > > I physically changed the AF24, and now I

Re: [AFMUG] Siklu Multihaul PTMP 60 ghz

It's up the spec sheet download. Good up to 300 meters. On Thu, Feb 23, 2017 at 10:00 AM, Bill Prince wrote: > I don't see any mention of range. What's this good for? 2000 feet? > > > bp > > > > On 2/23/2017 6:52 AM, Gino Villarini wrote: > >

Re: [AFMUG] The smallest Mikrotik with a 10GbE port

We just got two in last week from Baltic. On Wed, Feb 1, 2017 at 8:37 PM, Rory Conaway wrote: > Baltic had some but they are on backorder again. > > > > Rory > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Eric Kuhnke > *Sent:* Wednesday, February 1, 2017

Re: [AFMUG] OT Pina Colada and long walks in the rain

OkCupid changed their rating system as it appeared to different users. It seems just telling people they are a good match, actually makes them like each other more. http://newyork.cbslocal.com/2014/07/29/okcupid-admits-to-manipulating-user-data-and-its-not-alone/ On Thu, Jan 26, 2017 at 6:09 PM,

Re: [AFMUG] OT Slightly, Cost of Living

While starting my ISP, I lived very frugally. No paid TV, only made enough to pay bills and make dinner. Now, I'm reaping the rewards of putting all that money back into my company and taking a fat salary and still putting money back into the company. Compared to you, yes, I'm living

Re: [AFMUG] OT Tesla autopilot and crash

The autopilot is the main reason I'd buy a Tesla. It's pretty amazing stuff. On Wed, Dec 28, 2016 at 6:08 PM, wrote: > I am surprised at the fact that the autopilot was a good 1-2 seconds ahead > of myself noticing anything wrong. > I can only guess that the radar was tracking

Re: [AFMUG] Small rack mount server for tower site

We used these power supplies: http://www.powerstream.com/DC-PC-48V.htm On Tue, Dec 20, 2016 at 3:58 PM, Paul McCall wrote: > Looking for server to run VM (Proxmox) and Windows desktop instance and > CentOs. Only have 16” of depth > > > > 4 Gb is sufficient but would like to

Re: [AFMUG] OT Directv Now

Yup, have that. Still not as good as the Roku remote. On Fri, Dec 9, 2016 at 7:51 PM, Ken Hohhof <af...@kwisp.com> wrote: > http://www.howtogeek.com/214400/how-to-use-your-iphone- > or-ipad-as-a-second-apple-tv-remote/ > > > > > > *From:* Af [mailto:af-boun...@af

Re: [AFMUG] OT Directv Now

Received mine yesterday. I couldn't tell the difference between it and the HD FiOS TV I have. But haven't moved it to my 4k TV yet. Although, I hate the remote. The Roku remote is so ergonomically friendly, just not happy with the Apple TV remote. On Fri, Dec 9, 2016 at 5:21 PM,

Re: [AFMUG] telco batteries

We've used Deka and Northstar and they perform flawlessly. Thinking about trying Carber Power. On Thu, Dec 8, 2016 at 9:33 PM, Chuck McCown wrote: > 148/1200=12.3 cents per watt hour. > -Original Message- From: George Skorup Sent: Thursday, December > 08, 2016 5:37 PM

Re: [AFMUG] Netonix DC voltage alarms

It sends e-mail alerts on port changes automatically. Haven't had any power issues to test if it e-mails on ow voltage. 2016-12-07 8:01 GMT-05:00 Stefan Englhardt : > Cant you configure email alerts ? > > > Ursprüngliche Nachricht > Von: Josh Baird

  1   2   3   >