Re: [wsjt-devel] No 73 allowed after RR73?

FWIW ... if you received an RR73 .. there is no need to reply. The station is saying that RR I got your last, and 'over and out' ... The other party is not waiting for your reply, they're on to another contact. Neil, KN3ILZ On 10/21/2023 1:14 PM, Andy Durbin wrote: WSJT-X ver 2.6.1, Win

Re: [Elecraft] K4 pre order

Eric, now that it looks the K4-F is finally on a production schedule, any hints on when there will be a K4-K ?? Thanks, Neil, KN3ILZ On 4/13/2023 3:18 PM, Eric Swartz wrote: Hi Rick, It looks like your K4D shipped today. :-) We're also working hard to ship a lot this week and next so we

Re: [wsjt-devel] USS Captain Robert Smalls

I agree this is a great happening, but I believe you sent it to the wrong list :) Neil, KN3ILZ On 4/12/2023 12:44 PM, robert evans LAST_NAME wrote: A Navy ship named for a Confederate victory now honors a Black Union hero : NPR

Re: [wsjt-devel] Possible wsjtx RC5 issue when built from source (No frequency info)

Um ... you need to do this: To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/wsjt-devel or, via email, send a message with subject or body 'help' to wsjt-devel-requ...@lists.sourceforge.net You can reach the person managing

Re: [Elecraft] SignaLink and KX3

始信息 发件人： Neil Zampella 日期: 2022/8/20 22:13 (GMT+08:00) 收件人： k2vjk , elecraft@mailman.qth.net 主题： Re: [Elecraft] SignaLink and KX3 You really don't need a Signalink to do digital modes and the KX3.   All you need is a good USB sound card, the audio cables for Tx & Rx (St

Re: [Elecraft] SignaLink and KX3

You really don't need a Signalink to do digital modes and the KX3.   All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: I called

Re: [wsjt-devel] “Disable Tx after sending 73” not working

That covers the other modes in WSJT-X, not FT8 or FT4. Neil, KN3ILZ On 7/18/2022 7:58 PM, Gene Marsh wrote: Reino, if that is the case, why do you need to check the box “Disable Tx after sending”? 73 de W8NET Miles “Gene” Marsh 3905 Century Club Master #47 3905 Century Club 2022 Eyeball host

Re: [wsjt-devel] wsjt-devel Digest, Vol 101, Issue 33

Don't blame me for that line it was in the message that I replied to ... :) I've always had the reminder to log the QSO turned on in WSJT-X. I like to see what I'm logging. Neil, KN3ILZ On 7/16/2022 7:54 AM, wsjt-devel-requ...@lists.sourceforge.net wrote: Send wsjt-devel mailing list

Re: [wsjt-devel] WSJT-X close the QSO unilaterally (?)

Yes ... take out the RR73 option double click on the Tx4 button and you switch to RRR ... then turn on the "PROMPT ME TO LOG QSO" option in Settings -> Reporting tab. You'll never get a 'autologged' QSO again as you have to manually OK what is being logged. Problem Solved. Neil, KN3ILZ On

Re: [wsjt-devel] Unwanted CQ in FT8

That can be done using the 'Free Text' area and macros from JT Alert.  No need to add another standard message.  As far as 'unwanted' CQs, uncheck the CALL 1ST checkbox. Neil, KN3ILZ On 7/12/2022 7:31 PM, Henryk Majcher wrote: I propose a small change in WSJT-X. Scenario: The users of

Re: [wsjt-devel] QSO impossible between compound call and /MM station ?

I quote:  "The developers will not allocate the needed spaces in the program to correct the issue. " The issue has NOTHING to do with the 'needed space' in the program, and ALL to do with the 77 bits of the data package being sent.    If it was a simple change in the program it would have been

Re: [wsjt-devel] Enhancement

But you do have Gridtracker available for Linux too . Neil, KN3ILZ On 11/22/2021 2:44 PM, John Korpal wrote: One other thing is JTAlert is only for windows. Sent from my iPhone On Nov 22, 2021, at 1:42 PM, John Korpal wrote:  I was just following the same design that appends the

Re: [wsjt-devel] test mail

Where are you sending your 'bug report' ... here, or the Groups.io list?   Two different locations. Neil, KN3ILZ On 10/14/2021 1:44 PM, Barry Jackson wrote: On 14/10/2021 19:33, Barry Jackson via wsjt-devel wrote: Does this list really take hours to update? sent at: Thursday, 14 October 2021

Re: [wsjt-devel] test mail

Are you getting the digest version? That said, I saw this at 1:54 PM Central time on the 14th Also, your name & callsign is helpful Neil, KN3ILZ On 10/14/2021 1:33 PM, Barry Jackson wrote: Does this list really take hours to update? sent at: Thursday, 14 October 2021 19:32

Re: [wsjt-devel] Feature Request: Hound Mode

Jim Brown via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net>> wrote: On 10/10/2021 7:12 PM, Neil Zampella via wsjt-devel wrote: > as F/H specifically requires you to reply to a Fox CQ above 1000 hz, and > since the decoder decodes the entire passband based on the ba

Re: [wsjt-devel] Feature Request: Hound Mode

. Oh and to those that say "grab the source and roll your own" - not everyone can or has the time to write software and roll their own. Regards, Grant VK5GR On Mon, Oct 11, 2021 at 11:55 AM Neil Zampella via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net>> wrote: In y

Re: [wsjt-devel] Feature Request: Hound Mode

In your case I would suggest create a separate CONFIGURATION for each mode you're using.    You can setup one for regular use, then one for other special modes such as the NA VHF contest, Field Day, Fox & Hound, etc. All you need to do is switch over to the mode you're going to use by selecting

Re: [wsjt-devel] WSJT-X and Ham Radio Deluxe (Some Good News)

If you're using the Secondary UDP Server in WSJT-X to do the logging to HRD, then be aware, that is 'deprecated', that is no longer being supported.   Its been that way for a while and still available, but it may disappear in a newer version. Neil, KN3ILZ On 10/4/2021 3:17 PM, Bruce Bohannon

Re: [wsjt-devel] Question, FT8

It's currently optional ... When you send RR73, when the Tx Enable turns off, the operator has the OPTION to click it back on, select the Tx5 message, and have it go out. See ... already implemented.  Just takes TWO clicks. Neil, KN3ILZ On 10/4/2021 7:21 AM, Alex wrote: Hi Jim, Hence the

Re: [wsjt-devel] Windows 11 and WSJT-X Observation

FWIW ... others are running the Windows 11 beta without problems.    Trying to compare HRD and FLDIGI to WSJT-X decoding is apples and oranges. WSJT-X is VERY CPU dependent, it needs a very fast CPU.  What CPU are you using to run it on?   The fact that decoding is having a problem usually

Re: [wsjt-devel] I stand Corrected

How is he harassing you?    He's asking for more details.   Just pasting the pic of the error box does nothing whatsoever.    That same box pops up when I start WSJT-X without having the rig turned on.   The 'More Details" button will supply a lot more information about the cause. Neil, KN3ILZ

Re: [wsjt-devel] Call for information about PC systems being used for WSJT-X

Bill, the CPU-Z program shows that I'm running an AMD Ryzen 4 Mobile 2500U with 4 cores, speed of 1596.76MHz, and it includes instructions for AVX, and AVX2. Hope this helps. Neil, KN3ILZ ___ wsjt-devel mailing list

Re: [Elecraft] Anyone try K4 with JTDX or WSJT-X?

Just checked with WSJT-X v2.3.1 (and v2.4.0-RC4 beta), they both have the latest Hamlib updates, and the K4 is listed. Neil, KN3ILZ On 4/7/2021 2:49 PM, Paul Van Dyke wrote: Andy Yes, but Before I left on my business trip the K4 designation was not there yet. But it worked fine with a K3S..

Re: [Elecraft] K4: Coolness factor meets production complexities

This is why I'm going to patiently wait for the K4 kit release, along with putting money aside for it. I suspect that along with the other engineering challenges, y'all are working on putting together the instructions for a proper kit build. While it won't be as complex as a K2, it will

Re: [wsjt-devel] Receipt of 73 after RR73 sent triggers a 73 reply from CQ caller

Got it ... :) Neil, KN3ILZ On 3/6/2021 8:30 AM, Bill Somerville wrote: On 06/03/2021 14:21, Neil Zampella wrote: Hi, I just installed 2.4.0-RC2 and found an issue with the auto sequencing after an RR73 is sent.    Normally, I'll click on the Enable Tx right after I send the RR73 so

[wsjt-devel] Receipt of 73 after RR73 sent triggers a 73 reply from CQ caller

Hi, I just installed 2.4.0-RC2 and found an issue with the auto sequencing after an RR73 is sent.    Normally, I'll click on the Enable Tx right after I send the RR73 so that the CQ call is immediately sent as the next Tx time slice comes up.    I have the setting to clear the standard messages

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

decides.    However, if you load to an online service, that's harder to correct. That's what I meant about how to log the Q65 QSOs. Neil, KN3ILZ On 3/6/2021 2:03 AM, Claude Frantz wrote: On 3/6/21 2:07 AM, Neil Zampella wrote: Hi Neil, Reino and all, I wouldn't go there yet.   The ADIF

Re: [wsjt-devel] Problem with WSJT-X 2.4.0-rc2 Mac Version

to work fine. Thus, the problem seems to be isolated to Q65. No Hamlib here. 73, John WA1EAZ On Mar 5, 2021, at 8:09 PM, Neil Zampella wrote: Why did you run the clone to test FT8 .. .wouldn't it be a better idea to see if WSJT-X worked correctly, then reported the issue?Using the clone

Re: [wsjt-devel] Problem with WSJT-X 2.4.0-rc2 Mac Version

Why did you run the clone to test FT8 .. .wouldn't it be a better idea to see if WSJT-X worked correctly, then reported the issue?    Using the clone does not give the same information as the WSJT-X RC versions often have Hamlib updates that other programs don't. Neil, KN3ILZ On 3/5/2021 1:10

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

Reino I wouldn't go there yet.   The ADIF committee has not yet met to add this mode to the ADIF standard. Neil, KN3ILZ On 3/5/2021 11:28 AM, Reino Talarmo wrote: On 3/5/21 2:54 PM, Joe Taylor wrote: Q65 is designed for two-way QSOs over especially difficult propagation paths such as

Re: [wsjt-devel] clock offset / fudge adjustment, automatic/manual

Mike Black and created a small program/script that will allow you to hand adjust your time.  You can find it on his QRZ page: https://www.qrz.com/db/W9MDB Neil, KN3ILZ On 3/4/2021 11:51 AM, David Smith wrote: again, clarifying the use case: Portable use, no internet. On Thu, Mar 4, 2021 at

Re: [wsjt-devel] Crash during QSO

David, is it possible to send this as an attachment, rather than a 'cut and paste' into an email? Thanks, Neil, KN3ILZ On 2/28/2021 7:23 AM, David Schmocker wrote: Sending JA7QVI KJ9I R-24. Awaiting RRR    SH message (crash at start of Tx minute)..

Re: [wsjt-devel] ANNOUNCEMENT: update_wsjtx_log.py released

.. and I rest my case. Neil, KN3ILZ On 2/26/2021 9:44 PM, Dave Slotter, W3DJS wrote: You're pretty brave behind your keyboard. It's a wonder with remarks like yours that anyone bothers to develop and release software for free. On Fri, Feb 26, 2021, 10:02 PM Neil Zampella mailto:ne

Re: [wsjt-devel] ANNOUNCEMENT: update_wsjtx_log.py released

Neil Zampella mailto:ne...@techie.com>> wrote: I agree with Marco.    Its not a 'deficiency' if its not in the design parameters of the program.    This is why there are third-party programs, and scripts like your's to ENHANCE the use of the program. Neil, KN3ILZ O

Re: [wsjt-devel] ANNOUNCEMENT: update_wsjtx_log.py released

I agree with Marco.    Its not a 'deficiency' if its not in the design parameters of the program.    This is why there are third-party programs, and scripts like your's to ENHANCE the use of the program. Neil, KN3ILZ On 2/26/2021 3:34 PM, Dave Slotter, W3DJS wrote: My opinion my words. You're

Re: [wsjt-devel] wsjt-devel Digest, Vol 84, Issue 158

I don't believe a  'macro' is used for this. Neil, KN3ILZ On 2/19/2021 2:39 PM, Jim Record wrote: Have you considered adding a downloadable macro capability to let a user program the capability for other contests. Maybe in Python? Jim AD0YO -- Jim Record /Firgenholt Joyner/ (Old English (sort

Re: [wsjt-devel] Widegraph cursor frequency box

You can't ... Neil, KN3ILZ On 2/19/2021 4:30 PM, Andy Durbin wrote: After installing WSJT-X ver 2.3.0 I have a cursor frequency readout box displayed every time my mouse cursor is over the Widegraph window even when no WSJT-X window has focus.   How can I disable this? 73, Andy, k3wyc

Re: [wsjt-devel] Winter Field Day Revisited

Considering the 'sponsor' of "Winter" Field Day had this to say below, I'm not sure its worth it to add this 'contest'.   Not to mention that the sponsor doesn't use the same types of codes that the ARRL Field Day uses.  The codes in WFD would not properly fit in a 77 bit package, so its not an

Re: [wsjt-devel] Email list

Ted, that's not going to work, you need to use the links listed at the bottom of every message to remove yourself. Neil, KN3ILZ On 2/17/2021 6:52 AM, Ted Lawhead Jr wrote: Please remove my e-mail address from your list. ___ wsjt-devel mailing

Re: [wsjt-devel] WSJT-x2.3.0 Anwser problem

Hi Rudy, the obvious first question is does the operator have Call 1st checked ? Neil, KN3ILZ On 2/16/2021 10:53 AM, on4...@telenet.be wrote: Hi Joe and colleagues, I have identified a problem here with a colleague PA3GZD. It works with WSJT-X version 2.3.0 in Windows 7. Everything has

Re: [wsjt-devel] Please save the T/R sequence lengths for each mode separately

, 16 Feb 2021 at 17:29, Neil Zampella mailto:ne...@techie.com>> wrote: So .. ?? It's like that for EVERY new mode, probably was like that for JT65 and its various permutations.  You have to setup Q65 at least once to get it up and running for the Q65 permutation you want

Re: [wsjt-devel] Please save the T/R sequence lengths for each mode separately

So .. ?? It's like that for EVERY new mode, probably was like that for JT65 and its various permutations.  You have to setup Q65 at least once to get it up and running for the Q65 permutation you want to try.    Saving that to a configuration takes a selection from a menu, typing a name, and

Re: [wsjt-devel] Fwd: FW: wjst-x trouble report

Since the new GA version 2.3.0 is out, and JT-Alert is now ast 2.16.17, try updating to the new versions to see if this still occurs.   Trying to troubleshoot a superseded version is probably not practical at this point in time. Neil, KN3ILZ On 2/12/2021 9:31 PM, M Bo wrote: Dear friends,  I

Re: [wsjt-devel] Version 2.4.0-rc1

Did you reset the frequency list when you installed the RC? Neil, KN3ILZ On 2/7/2021 1:56 PM, Harry E. Hoffman wrote: I found an issues with the band pull down menu in V2.4.0-rc1. The list will have the frequencies truncated. This stared happening intermittently one moment it would be OK, I

Re: [wsjt-devel] (no subject)

That's not going to work, you have to go to the URL shown at the bottom of each message. Neil, KN3ILZ On 2/5/2021 11:30 AM, John Zantek wrote: unsub ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

Re: [wsjt-devel] WSJT - DECODING PROBLEMS

I'd also make sure that you're using the latest version of WSJT-X.  What you have listed is not a authorized RC version, that RC number is more likely a clone version. You should head to this page to get the latest General Availability version, or the current v2.3.0-RC4 beta version.

Re: [Elecraft] Nifty Manuals

Hi Mick, there was no link to any site for this.  Could you copy and paste ? Thanks, Neil, KN3ILZ On 1/4/2021 1:07 PM, Mick Hall wrote: These are still available new in the UK at Elecraft K2 Plus Options Nifty Mini Manual | | | | | | | | | | | Elecraft K2 Plus Options Nifty Mini

Re: [wsjt-devel] Question about QRZ Integration

cents... 73, Jim S. N2ADV On Dec 3, 2020, at 2:27 PM, Neil Zampella mailto:ne...@techie.com>> wrote:  There are many for Windows, and I'm fairly sure that Gridtracker does a lookup als

Re: [wsjt-devel] Question about QRZ Integration

y the file "wsjtx_log.adi" file. Thank you. Regards -- Dave Slotter, W3DJS <https://www.qrz.com/db/W3DJS> On Thu, Dec 3, 2020 at 11:29 AM Neil Zampella mailto:ne...@techie.com>> wrote: FWIW ... there are plenty of third-party bridge, programs that do this as do many log

Re: [wsjt-devel] Question about QRZ Integration

FWIW ... there are plenty of third-party bridge, programs that do this as do many logging programs.  Adding something that requires Internet access both ways, rather than the PSK Reporter's feed only, may cause other issues, as well as add on to the support issues often seen here. Neil, KN3ILZ

Re: [Elecraft] KX2 & FT8

The one question I didn't see asked was you have the rig in DATA-A mode, right? Neil, KN3ILZ On 12/1/2020 7:04 AM, Mark Moeller wrote: I am working to get my KX2 setup for FT8 and appreciate any help. My setup includes: KX2 connected to a G5RV antenna, Windows 10 laptop, USB Sound Card, Mic &

Re: [Elecraft] Firmware development

Of course, as mentioned previously in this thread, large companies have funds that they can invest in personnel to do the development, so I would expect that Kenwood would be able to assign personnel quickly to handle such issues. Neil, KN3ILZ On 11/25/2020 10:25 AM, Andy Durbin wrote: "Name

Re: [wsjt-devel] WSJT-X won't connect to a COM Port

It is NEVER a good idea to run 'as Administrator' as that raises the permissions of the program and often causes other programs issues as they can't communicate with it. In fact, no well written Windows program should be run 'as Administrator'. Neil, KN3ILZ On 11/6/2020 7:56 AM, John Clark

Re: [Elecraft] K4 built-in operating manual now available

FYI:   the Elecraft website also has PDF versions of the K4 manual that you can print right now. Neil, KN3ILZ On 10/8/2020 3:54 PM, Nigel Lemaire wrote: I kind of like that the K4 has a built in manual, which is no doubt updated as required AUTOMATICALLY. Is there a provision to print out the

Re: [wsjt-devel] wsjt-devel Digest, Vol 80, Issue 19

True ... I just saw that it said he was on 6 meters ... :( Neil, KN3ILZ On 10/5/2020 5:27 AM, Bill Somerville wrote: On 05/10/2020 03:58, Neil Zampella wrote: Um .. not sure what that is supposed to show.   It shows that you're on 6 meters.  If someone is reporting you on 60 m, that's

Re: [wsjt-devel] wsjt-devel Digest, Vol 80, Issue 19

Um .. not sure what that is supposed to show.   It shows that you're on 6 meters.  If someone is reporting you on 60 m, that's their problem, they're reporting you incorrectly.  Has nothing to do with PSK Reporter. Neil, KN3ILZ On 10/4/2020 8:06 PM, wsjt-devel-requ...@lists.sourceforge.net

Re: [Elecraft] K4 sound card capability

Terry, the K4 will connect with a USB cable to your PC, you will not need a Signalink.  It will have a much better soundcard than the Signalink provides.    Since the K4 manuals are now online, you can download the PDF and see for yourself. FWIW .. you don't need the Signalink with the KX3,

Re: [Elecraft] No Tx audio after WSJT upgrade

Actually ... WSJT-X only uses what windows tells it is available.    After Windows updates its been found that Windows will scramble the audio devices, especially if they are USB devices. What has been found to work is to RENAME the device you use in the Sound Control Panel.  Bring up the Sound

Re: [Elecraft] K2 Rig Control Software

DXLab's DX Commander works fine with the K2, and integrates well with DXKeeper log program, along with the rest of the DXLabs suite. I use Commander with the K2 to run WSJT-X modes with Commander as the rig. Neil, KN3ILZ On 8/26/2020 3:15 PM, Dave Van Wallaghen wrote: Hey Denny, I use the

Re: [Elecraft] K2 latching relays and filter alignment

Albin, Elecraft does have these relays.   I had to replace one in my K2, and I ordered via the website. Neil, KN3ILZ On 8/24/2020 10:35 AM, Albin Stigö wrote: Hi, I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH who sadly passed away earlier this year at age 90. It

Re: [wsjt-devel] WSJT-X and Windows CMAKE Versions > 3.14.4

Oh please ... give it a rest ... Neil, KN3ILZ On 8/22/2020 6:35 PM, Stephen VK3SIR wrote: Bill, * Instead you choose to write long rants about the incompetence of the WSJT-X development team.. Long “rants” … People also said that of Washington, Adams, Franklin and Jefferson’s speeches

Re: [wsjt-devel] r2.2.2 Minor Issue with "short" calls that use DX

Um ... you just got it ... :) Neil, KN3ILZ On 8/19/2020 4:44 PM, jbozell wrote: Well! This seemingly innocuous (but useful) thread has suddenly gotten much more interesting. Popcorn please...who has the square for the first person to say “if you don’t like it, scroll down”?  73, WB0CDY

Re: [wsjt-devel] r2.2.2 Minor Issue with "short" calls that use DX

Since Tx5 is can be used for "Free Text", adding any sort of 'callsign check' would be hard to implement as anything can, and often is entered into that message box. The logic would need to be able to distinguish between a valid callsign, and something that LOOKS like a valid callsign but

Re: [wsjt-devel] r2.2.2 Minor Issue with "short" calls that use DX

I suspect its due more to the fact that he was using the Tx5 message with its 13 character limit, and not the Tx6 which allows the addition of up to 4 characters between the 'CQ' and the callsign, and will also include the full 4 character grid in the transmission. Neil, KN3ILZ On 8/18/2020

Re: [wsjt-devel] Changes to the INSTALL file in the 2.2.2 tarball

You need to visit the webpage listed at the bottom of all emails and unsubscribe from there. Neil, KN3ILZ On 8/11/2020 7:13 PM, Jeff Elkins wrote: unsubscribe wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

I'm assuming that all the Zoom presentations will be available, since I'm assuming that people like me won't be able to view some of them live.   I'm very interested in the Classic Line presentation, along with the K4 presentation. Thanks, Neil, KN3ILZ On 8/7/2020 1:08 PM, Wayne Burdick wrote:

Re: [wsjt-devel] WSJT-X defect report - Incorrect tab 2 grid message

I have no problem with removing that for the next version.  Would save a lot of time by you and the other developers during contests answering questions about why something was not logged properly. Tab 1 gives the user a full visual display of what they are sending, and should be receiving,

Re: [wsjt-devel] WSJT-X v2.3.0

I suspect its the developers working on the next release.   Its not available to the public. Neil, KN3ILZ On 7/26/2020 3:23 PM, Steinar Aanesland wrote: Hi all Is there a version WSJT-X v2.3.0-devel out there ? On PSKreporter KA1R seems to use "WSJT-X v2.3.0-devel adafb8" -- This email

Re: [wsjt-devel] Rig verification

Mike See below On 7/16/2020 12:11 AM, Black Michael wrote: If anybody has a rig out there that's in this list and you have it working with WSJT-X...or if you have any bugs to report working with WSJT-X please let me know. Would like to promote as many of these to stable as possible and

Re: [Elecraft] WTB: *****NIFTY MANUAL FOR K2*****

Not to mention that they don't have it listed any longer, even in the discontinued manual list. To the original poster, you can try emailing them at supp...@niftyaccessories.com they may be able to help you with an

Re: [wsjt-devel] Field Day Frequencies

The ARRL has not set any 'different' frequencies for Field Day other than the usual no contests on WARC bands and 60 meters. The standard FT8 & FT4 frequencies should be used.   You can verify this by going to the ARRL website under Field Day rules. Neil, KN3ILZ On 6/23/2020 10:09 PM, Matthew

Re: [Elecraft] K4 cables

Probably not .. but you can get CAT6 cable (which will work with CAT5 connections) at Amazon at various cable lengths if you don't have one lying around. https://tinyurl.com/ycrsycwg Neil, KN3ILZ On 6/15/2020 11:12 AM, Joseph Trombino, Jr wrote: Howdy Gang. Does anyone know if the K4 will

[Elecraft] KAT100 No Longer Available, was KPA100 No Longer Available

Sorry for the confusion ... wasn't thinking when I typed out the subject line.  Thinking KAT100 typed KPA100, then sent it  :( Neil, KN3ILZ On 6/4/2020 3:32 AM, Neil Zampella wrote: Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued.   I'm

[Elecraft] KPA100 No Longer Available

Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued.   I'm guessing its due to the permanent unavailability of a through part.    I'm wondering if Wayne or Eric could comment on this, and if there's any suitable replacement for that tuner? Neil,

Re: [wsjt-devel] WSJT-X 220-rc3 - WSPRnet manual upload issue

Hideo-san, have you tried to contact the admin team on the site: wspr...@wsprnet.org I'm not sure Joe and the team have anything to do with it.   They also have a separate forum area: http://wsprnet.org/drupal/forum Neil, KN3ILZ On 5/30/2020 3:33 AM, JH3XCU wrote: WSJT-X 220-rc3 - WSPRnet

Re: [wsjt-devel] WSJT-X v2.2.0 Issue (Both RCs)

FWIW ... its a Windows issue, so I expect the clone to have the same issue if its staying on the code base. Neil, KN3ILZ On 5/27/2020 10:58 AM, Steve Sacco wrote: So the interesting thing is that this *never* happened previous to WSJT-X v2.2.0.  I've been running this hardware setup for nearly

Re: [wsjt-devel] rc2 UI - 2nd email

FWIW ... Tx5 is not cleared just in case you have to resend an RR73 if your QSO partnet did not receive it. Neil, KN3ILZ On 5/26/2020 6:28 AM, Alan Groups wrote: Redundant QSO left over from previous session - using ESC key cleared all fields except TX5.  This cleared itself on a program

Re: [wsjt-devel] WSJT-X 2.2.0 rc2

What's your RIG, OM ?? Neil, KN3ILZ On 5/26/2020 2:05 AM, Allan VK4QG wrote: Gentlemen, To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM, W10 pro 64bit. I do not use CAT but instead use RTS on COM1 for opto-isolated PTT and XFR isolation for audio in and out of the sound-card,

Re: [wsjt-devel] Fwd: Clicking on RR73 produced wrong TX response msg

Well ... the 73 is what triggers the WSJT-X log panel.    As far as the multiple RRR/RR73s, the RRR users send DO expect a 73 from you (at least the system does), the RR73 users have no clue. Neil, KN3ILZ On 5/21/2020 6:17 PM, Al Pawlowski wrote: Actually, just discovered that WSKJTx already

Re: [wsjt-devel] Clicking on RR73 produced wrong TX response msg

5/19/2020 11:48 PM, Gary McDuffie wrote: On May 19, 2020, at 10:05, Neil Zampella wrote: .. someone sending an RR73 does not expect a reply, the last 73 is a courtesy from you the answering station. I certainly do, in order to let him know I got his RR73 and he needs to sen nothing else.

Re: [wsjt-devel] Clicking on RR73 produced wrong TX response msg

FWIW .. someone sending an RR73 does not expect a reply, the last 73 is a courtesy from you the answering station.    If someone keeps sending RR73, they don't understand the use of that response. Neil, KN3ILZ On 5/19/2020 10:06 AM, Black Michael wrote: What he's describing has happened to me

Re: [Elecraft] Elecraft Digest, Vol 193, Issue 29

To unsubscribe .. you need to follow the directions at the bottom of every message: To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to

Re: [Elecraft] K4???

Wayne, quick question ... I am giving very serious consideration to a K4, but the kit version.   Assuming the new timeline on the factory version works out, should we expect a kit by Sept 2021? Thanks, Neil, KN3ILZ On 5/16/2020 1:15 PM, Wayne Burdick wrote: Mike, K4HDs will take longer. We

Re: [wsjt-devel] SNR compare

I believe this was covered in the User Manual for v2.2 "SNR estimates no longer saturate at +20 dB, and large signals in the passband no longer cause the SNR of weaker signals to be biased low. Times written to cumulative journal file ALL.TXT are now correct even when the decode occurs after the

Re: [wsjt-devel] Suggestion: Have Rx following Tx on CQ option?

Um ... all I do is click on the DOWN ARROW next to the Tx location which sets the Rx to the same location.  One click. Neil, KN3ILZ On 5/12/2020 6:24 PM, Stephen Ireland wrote: Folks, One minor suggestion for future RC candidates... I have been calling a station XQ1KN that cannot see me ...

[wsjt-devel] FYI ...

Hi all, just a heads up that when I tried to run the setup of v2.2.0-RC1, AVG did not recognize it as valid, and automatically submitted it to AVG for analysis.   Once its analyzed AVG will allow installation. Takes about 5 or 10 minutes but once done, won't happen again. Notice, it did not

Re: [wsjt-devel] Coming soon: WSJT-X 2.2.0-rc1

Ken, I am going to assume that if you switch back to normal mode, the original decision will not be 'sticky' and will pop up again. So if you have some lid who insists on using contest mode on the normal frequencies you may have to change bands to escape that person. Neil, KN3ILZ On 5/8/2020

Re: [wsjt-devel] unsubscribe

Rick, at the bottom of each message there is a link, you have to go to that link to unsubscribe. Neil, KN3ILZ On 5/5/2020 4:28 PM, Rick wrote: >>SNIP ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

Re: [wsjt-devel] unsubscribe

You have to do that yourself. At the bottom of each email there is a link to the list's self-service site: https://lists.sourceforge.net/lists/listinfo/wsjt-devel Neil, KN3ILZ On 4/23/2020 6:26 PM, Rick wrote: please unsubscribe me from this email list. On Thu, Apr 23, 2020 at 3:10 PM

Re: [wsjt-devel] WSJT-X Bug?

Not a WSJT-X bug ... sounds more like RFI getting into the USB cable Neil, KN3ILZ On 4/2/2020 8:33 PM, Tom Stock wrote: Hello, I'm having a problem with version 2.1.2 68f9 Problem: When in transmit mode, WSJT-X will suddenly switch from my usb codec for output (my signalink usb) to the

Re: [wsjt-devel] Lost red Lotw user in band activity

ink/?LinkId=550986> for Windows 10 *From: *Neil Zampella <mailto:ne...@techie.com> *Sent: *Wednesday, April 1, 2020 9:26 AM *To: *wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> *Subject: *Re: [wsjt-devel] Lost red Lotw user in band activity Head back to the

Re: [wsjt-devel] Lost red Lotw user in band activity

Head back to the COLORS setting tab, and click on the FETCH NOW to update the LoTW user file.  Close then open the program. Should fix this. Neil, KN3ILZ On 3/31/2020 4:30 PM, Barry Bowman wrote: Hello _Running:_ WSJT-X  version 2.1.2 Windows 10 home, version 1809 64 bit Colors: Red

Re: [wsjt-devel] Unsubscribe me please

Don't know how you get info from the list, but at the bottom there is usually a link like this: https://lists.sourceforge.net/lists/listinfo/wsjt-devel You have to go there to unsubscribe. Neil, KN3ILZ On 3/9/2020 9:31 PM, richard meixner wrote: Sent from Yahoo Mail on Android

Re: [Elecraft] Where is Elecraft Support ?

Exactly Jim.   Elecraft had to discontinue their 60 meter adapter (K60XV) for the K2 as a key part is no longer available, and it would require a major board change to continue providing the same functionality. Evidently they no longer sell enough of that option to make it fiscally possible.

Re: [Elecraft] Elecraft Digest, Vol 190, Issue 22 Open Office etc

Jim if all you're using Open/Libre Office for is creating PDFs, you may want to look at the PDF printer driver from Software995.com.    Its free (with ads) but if you want to pay the $9.95, its yours for life.    I use it for all my work, and I create a LOT of PDFs as records of transactions in

Re: [wsjt-devel] F/H Feedback from a Fox

Not shooting the messenger, but aiming at the persons sending the message through you. WHY didn't they report this 4 months ago? Did they think it would magically go away over that time frame?   Did they imagine that Joe, Steve, and BIll could 'read their minds' ?? Good GRIEF ... Neil,

Re: [wsjt-devel] FT4 and FT8 Contesting

This is why WSJT-X requires someone in front of the computer to actually use their decision making process to do this. Neil, KN3ILZ On 2/28/2020 9:26 AM, DG2YCB, Uwe wrote: Maybe a small correction to my proposal: IMO wsjt-x should auto-log all incomplete QSOs when all necessary data have

Re: [wsjt-devel] 60 meters

PLEASE do NOT continue this here .. its already causing issues on the WSJT groups.io list, and has NOTHING to do with development of WSJT-X modes. Neil, KN3ILZ On 2/22/2020 12:45 PM, Rich Zwirko - K1HTV wrote: Seannon AG0NY , The FCC rules regarding 60 Meter channelized operation require

Re: [Elecraft] anyone recommend where to buy a SERIAL to USB cable for a k3

FWIW .. he's looking for a K3 cable .. DX Engineering only carries the KXUSB cable for the KX3. Neil KN3ILZ On 1/25/2020 7:00 PM, Dave wrote: I ordered my KXUSB-A cable from DX Engineering. Closer to me, faster shipping. I see you have a 6 area call. If you are in CA then ordering from

Re: [wsjt-devel] RTTY

The only reason you'd add RTTY to WSJT-X is if there were some way to improve it for weak signal work, the program and its protocols were not designed for any other reason.   The other reason is one you overlooked in Dave's post: Quote: 3. Each candidate development task has an "opportunity

  1   2   3   4   5   >