orage Element 20:Full :VolumeTag=000120L7
>> Wed Nov 08 11:43:16.027002906 2017: pid 23508: thd-0x18fd200: taper:
>> mtx: Storage Element 21:Empty
>> Wed Nov 08 11:43:16.027010865 2017: pid 23508: thd-0x18fd200: taper:
>> mtx: Storage Element 22:Empty
>>
type='failed',
reason='notfound', message='No acceptable volumes found'
On Wed, Nov 8, 2017 at 10:15 AM, Jean-Louis Martineau
<jmartin...@carbonite.com <mailto:jmartin...@carbonite.com>> wrote:
On 08/11/17 10:07 AM, Greg Dickie wrote:
> So in /var/lib/amanda/CON
200: taper: mtx:
> Storage Element 23:Empty
> Wed Nov 08 11:43:16.027026856 2017: pid 23508: thd-0x18fd200: taper: mtx:
> Storage Element 24:Empty
> Wed Nov 08 11:43:16.027077019 2017: pid 23508: thd-0x18fd200: taper:
> flexstorii: updating state
> Wed Nov 08 11:43:16.02
state
Wed Nov 08 11:43:16.029230821 2017: pid 23508: thd-0x18fd200: taper:
new Amanda::Changer::Error: type='failed', reason='notfound',
message='No acceptable volumes found'
On Wed, Nov 8, 2017 at 10:15 AM, Jean-Louis Martineau
<jmartin...@carbonite.com <mailto:jmartin...@carbonite.com&g
='failed', reason='notfound', message='No
acceptable volumes found'
On Wed, Nov 8, 2017 at 10:15 AM, Jean-Louis Martineau <
jmartin...@carbonite.com> wrote:
> On 08/11/17 10:07 AM, Greg Dickie wrote:
> > So in /var/lib/amanda/CONFIG I do not see taper logs. I'll figure out
> > w
On 08/11/17 10:07 AM, Greg Dickie wrote:
So in /var/lib/amanda/CONFIG I do not see taper logs. I'll figure out
why..
run: amgetconf build.amanda_dbgdir
Go in the resulting directory /server/WeeklySet1
Jean-Louis
This message is the property of CARBONITE, INC. and may contain confidential or
So in /var/lib/amanda/CONFIG I do not see taper logs. I'll figure out why..
touching the file regenerates the email so it's looking at the file. I ran
amtape WeeklySet1 update 14-21=
no change.
Lots of helpful info here, thanks guys.
Greg
On Wed, Nov 8, 2017 at 9:52 AM, Nathan Stratton
On Wed, Nov 08, 2017 at 09:17:31 -0500, Greg Dickie wrote:
> running 3.4.5 and interactivity is set up
Okay, good.
> but whatever I do to the
> /tmp/email_input file just recreates the message. I'm pretty sure if I put
You mean it just sends repeatedly
plugin "traditional"
}
define taperscan taper_oldest {
comment "oldest"
plugin "oldest"
}
define taperscan taper_lexical {
comment "lexical"
plugin "lexical"
}
taperscan "taper_lexical"
******
quot;
plugin "oldest"
}
define taperscan taper_lexical {
comment "lexical"
plugin "lexical"
}
taperscan "taper_lexical"
********
touching the file sends another email:
No acceptable volumes found
Insert a new
, 2017 at 9:03 AM, Nathan Stratton Treadway
<natha...@ontko.com <mailto:natha...@ontko.com>> wrote:
On Tue, Nov 07, 2017 at 18:23:25 -0500, Greg Dickie wrote:
> After 32TB of 48TB backed up I suddenly get a "No acceptable
volumes
> found". Is there
:03 AM, Nathan Stratton Treadway <natha...@ontko.com
> wrote:
> On Tue, Nov 07, 2017 at 18:23:25 -0500, Greg Dickie wrote:
> > After 32TB of 48TB backed up I suddenly get a "No acceptable volumes
> > found". Is there a way to continue the backup rather than abor
On Tue, Nov 07, 2017 at 18:23:25 -0500, Greg Dickie wrote:
> After 32TB of 48TB backed up I suddenly get a "No acceptable volumes
> found". Is there a way to continue the backup rather than aborting and
> restarting? I have ensured there are valid tape loaded.
What versio
On 07/11/17 06:23 PM, Greg Dickie wrote:
Hi,
After 32TB of 48TB backed up I suddenly get a "No acceptable volumes
found". Is there a way to continue the backup rather than aborting and
restarting? I have ensured there are valid tape loaded.
There is no way to continue the c
Hi,
After 32TB of 48TB backed up I suddenly get a "No acceptable volumes
found". Is there a way to continue the backup rather than aborting and
restarting? I have ensured there are valid tape loaded.
Thanks,
Greg
--
Greg Dickie
just a guy
514-983-5400
Hi,
Am 15.04.2011 19:11, schrieb Jean-Louis Martineau:
Can you try the attached patch?
looks good here. An amdump now found and used the tape, even with
0 KAS071 reuse BARCODE:KAS071
syntax in the tapelist. Thanks.
Regards,
Marc
--
Marc Muehlfeld (IT-Leiter)
Zentrum fuer Humangenetik
Anything new about this bug?
--
Marc Muehlfeld (IT-Leiter)
Zentrum fuer Humangenetik und Laboratoriumsmedizin Dr. Klein und Dr. Rost
Lochhamer Str. 29 - D-82152 Martinsried
Telefon: +49(0)89/895578-0 - Fax: +49(0)89/895578-780
http://www.medizinische-genetik.de
Marc,
Can you try the attached patch?
Jean-Louis
Marc Muehlfeld wrote:
Anything new about this bug?
diff --git a/perl/Amanda/Changer.pm b/perl/Amanda/Changer.pm
index a6857a5..5bc63c6 100644
--- a/perl/Amanda/Changer.pm
+++ b/perl/Amanda/Changer.pm
@@ -185,6 +185,7 @@ has one of the
Hi,
I'm running amanda 3.2.2 and encountered the following problem:
I want to flush the holdingdisk content to a new labled tape, but amanda
always reports No acceptable volumes found - but a new labled tape is in the
changer!
$ amadmin KAS tape
The next Amanda run should go onto tape
the tape.
Jean-Louis
Marc Muehlfeld wrote:
Hi,
I'm running amanda 3.2.2 and encountered the following problem:
I want to flush the holdingdisk content to a new labled tape, but
amanda always reports No acceptable volumes found - but a new labled
tape is in the changer!
$ amadmin KAS tape
volumes found
If I change the tapelist entry to
2001010100 KAS071 reuse
it returns:
$ amtape KAS taper
Searching for label 'KAS071': found in slot 2: volume 'KAS071'
Will write to volume KAS071 in slot 2.
--
Marc Muehlfeld (IT-Leiter)
Zentrum fuer Humangenetik und Laboratoriumsmedizin Dr
Hi All,
i have a strange error about Amanda.
I found no solution to this bug.
Amcheck make his job :
amcheck axis
Amanda Tape Server Host Check
-
Holding disk /media/contessa/backup/backup-giornalieri: 833545744 KB
disk space available, using 41943040 KB as
$ amtape KAS inventory
slot 1: unknown state
slot 2: label KAS071 barcode KAS071
.
What's the output of 'amtape KAS taper', it should find the tape.
$ amtape KAS taper
Searching for label 'KAS019': label 'KAS019' not recognized or not found
UNKNOWN
ERROR: No acceptable volumes found
If I
Am 04.04.2011 14:03, schrieb Nicolino Curalli:
i have a strange error about Amanda.
Please don't hijack other peoples threads!!!
If you want to start your own thread send a *new* mail and never reply
just to others mails!
--
Marc Muehlfeld (Leitung Systemadministration)
Zentrum fuer
Am 04.04.2011 19:12, schrieb Jean-Louis Martineau:
Put '0 KAS071 reuse BARCODE:KAS071' in the tapelist
Done.
$ amtape KAS slot 2
slot 2: time X label KAS071
changed to slot 2
$ amtape KAS taper
Searching for label 'KAS019': label 'KAS019' not recognized or not found
60villagedrive-traditional
No acceptable volumes found
This used to work. I made some *minor* changes to the config file,
which does check out (amcheck is successful). What is amvault doing
here? The volumns are still in the changer (I checked!). What am I
missing?
Amanda Version 3.2.0
--
Robert Heller
On Wed, Aug 4, 2010 at 2:47 PM, Jean-Francois Malouin
ma...@bic.mni.mcgill.ca wrote:
I think I am starting to understand but I'm still confused as to why
amdump uses the oldest newly labeled tape but then refuses to use the
second to last newly labelled tape. Also the fact the amreport says
by amreport:
FAILURE DUMP SUMMARY:
tutor /raid/data2 lev 0 partial taper: No acceptable volumes found
I've put the taper debug file in http://www.bic.mni.mcgill.ca/~malin/amanda
as it's too big to be attached here. Note that this file is ~750MB
uncompressed. Unfortunately I doubt you'll get
On Wed, Aug 4, 2010 at 10:15 AM, Jean-Francois Malouin
ma...@bic.mni.mcgill.ca wrote:
tutor /raid/data2 lev 0 partial taper: No acceptable volumes found
I've put the taper debug file in http://www.bic.mni.mcgill.ca/~malin/amanda
as it's too big to be attached here. Note that this file
* Dustin J. Mitchell dus...@zmanda.com [20100804 13:52]:
On Wed, Aug 4, 2010 at 10:15 AM, Jean-Francois Malouin
ma...@bic.mni.mcgill.ca wrote:
tutor /raid/data2 lev 0 partial taper: No acceptable volumes found
I've put the taper debug file in http://www.bic.mni.mcgill.ca/~malin/amanda
Hi,
This is for amanda-3.1.1.
For the last week or so amreport has been giving me the error:
FAILURE DUMP SUMMARY:
tutor /raid/data1 lev 0 partial taper: No acceptable volumes found
every time a new tape is requested by the taper. The hold disk then
fills up to capacity. amflush
?
Jean-Louis
Jean-Francois Malouin wrote:
Hi,
This is for amanda-3.1.1.
For the last week or so amreport has been giving me the error:
FAILURE DUMP SUMMARY:
tutor /raid/data1 lev 0 partial taper: No acceptable volumes found
every time a new tape is requested by the taper. The hold disk
Jean-Francois Malouin wrote:
Hi,
This is for amanda-3.1.1.
For the last week or so amreport has been giving me the error:
FAILURE DUMP SUMMARY:
tutor /raid/data1 lev 0 partial taper: No acceptable volumes found
every time a new tape is requested by the taper. The hold disk
amreport has been giving me the error:
FAILURE DUMP SUMMARY:
tutor /raid/data1 lev 0 partial taper: No acceptable volumes found
every time a new tape is requested by the taper. The hold disk then
fills up to capacity. amflush will notheless write to multiple tapes.
I've been getting
-Francois Malouin wrote:
Hi,
This is for amanda-3.1.1.
For the last week or so amreport has been giving me the error:
FAILURE DUMP SUMMARY:
tutor /raid/data1 lev 0 partial taper: No acceptable volumes found
every time a new tape is requested by the taper. The hold disk
Brian Cuttler wrote:
What's the output of: amtape CONF taper
It fail on the first or second tape?
~# su amanda -c ~amanda/sbin/amtape down taper
slot 25: volume 'av48-2_down_Q00060' is still active and cannot be overwritten
slot 26: volume 'av48-2_down_Q00061' is still active and cannot
36 matches
Mail list logo
