-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jochen Puchalla escribió:
[Freitag, 1. Dezember 2006 19:33] schrieb Fernando Toledo (wrote):
here can be the problem, the channel do not change to 11 (2.462 GHz) and
still in 14 ( Frequency=2.484 GHz)
i do not see the AP's too
my notebook
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Larry Finger escribió:
This version of the patch will find out if the HW enable bit is r/w or
ro. It attempts to hw disable the radio, saves the results, enables the
radio, and returns the values off/on values found in the HW radio
control word.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Fabian Förg escribió:
Hello,
on my HP nx6325 I have a Broadcom 4311 WLAN chip.
I use the dscape driver with the Linux kernel 2.6.19-rc6 pulled from
Linville's wireless networking development tree.
The blue LED is on and iwconfig/ifconfig lists
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Fabian Förg escribió:
Larry Finger wrote:
There isn't any hardware in the interface that lets us turn it on,
thus we don't know. None of the developers have your hardware. You can
try pushing the button, or whatever. If you find some special
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Chuckk Hubbard escribió:
I have the 4311 too, and I would also be willing to help test. I
don't know nothing about no kernel, though.
-Chuckk (chuckkh)
On 1/5/07, Mike Zupan [EMAIL PROTECTED] wrote:
I know that there are still issues with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Chuckk Hubbard escribió:
I wouldn't expect them to care, they are so well-known for this
attitude. I'm sure they know people are angry. I did not know there
was even a way to write to them. Could you email me the address?
here has info:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rainer Dorsch escribió:
Hello,
I am looking for an USB WLAN stick, which is supported by a native Linux
driver. I want to plug it into an nslu2 (ARM cpu), and run it as access
point, i.e. ndiswrapper is *not* an option.
Does anybody have
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Stephen Sinclair escribió:
The PCI-E modifications to bcm43xx do not set up the interrupt vector
correctly. Tested with BCM4311 (PCI-E) on x86_64 and BCM4306 (PCI) on i386.
This was successful for me. My 4311 is now getting interrupts, and I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
i testing traffic now
i try nmap 192.168.1.0/24 (to scan my network ) and the device is die
if i try to unload the bcm43xx module, i have a deadlook (cant shutdown,
only hardware reset)
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
i can scan
i see the ap associated:
eth1 IEEE 802.11b/g ESSID:prosistem Nickname:Broadcom 4311
Mode:Managed Frequency=2.437 GHz Access Point:
00:0E:2E:64:77:FD
Bit Rate=1 Mb/s Tx-Power=18 dBm
RTS thr:off
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Larry Finger escribió:
Fernando Toledo wrote:
i can scan
i see the ap associated:
eth1 IEEE 802.11b/g ESSID:prosistem Nickname:Broadcom 4311
Mode:Managed Frequency=2.437 GHz Access Point:
00:0E:2E:64:77:FD
Bit Rate
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Larry Finger escribió:
Fernando Toledo wrote:
i testing traffic now
i try nmap 192.168.1.0/24 (to scan my network ) and the device is die
if i try to unload the bcm43xx module, i have a deadlook (cant shutdown,
only hardware reset)
When I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi i have a problem to see an Dlink ap900+ in my house (that have the
latest revision B firmware and basic ap configuration)
i have a zd1211 usb dongle and my onboard 4311PCIE (the zydas dongle
connect fine, but not the 4311)
wlan1 : zd1211rw
eth1:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Joseph Jezak escribió:
bcm43xx: Controller RESET (TX timeout) ...
bcm43xx: IRQ_READY timeout
bcm43xx: core_up for active 802.11 core failed (-19)
bcm43xx: Controller restart failed
bcm43xx: ASSERTION FAILED (!err)
at:
El Lunes, 19 de Febrero de 2007 15:46, Michael Buesch escribió:
I just want to mention that Ad-Hoc works fine
with the bcm43xx-d80211 driver in my tree.
I didn't have to do any code changes, but simply try it once. ;)
So, well. As the question has been asked several times
if adhoc is
El Lunes, 5 de Marzo de 2007 23:09, Aleksander Trofimowicz escribió:
Hello,
Currently I'm testing a recent kernel from the mainline tree (head at
20b0f65d35ae45d43f363ace3744a775a752d265). Good news is that the
bcm43xx driver works on nx6325 . And works quite well. Though I tested
it in
El Sábado, 10 de Marzo de 2007 21:58, Larry Finger escribió:
I have just put a new patch for 2.6.20.2 at
ftp://lwfinger.dynalias.org/patches/combined-2.6.20.2.patch. This patch has
some important fixes for 4318 users.
Larry
___
Bcm43xx-dev mailing
El Domingo, 18 de Marzo de 2007 13:01, Larry Finger escribió:
Fernando Toledo wrote:
El Sábado, 10 de Marzo de 2007 21:58, Larry Finger escribió:
I have just put a new patch for 2.6.20.2 at
ftp://lwfinger.dynalias.org/patches/combined-2.6.20.2.patch. This patch
has some important fixes
its wan on 2.6.20.6 + combined patch
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 14/512
bcm43xx:
its wan on 2.6.20.6 + combined patch
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 14/512
bcm43xx:
El Viernes, 13 de Abril de 2007 19:07, escribió:
Fernando Toledo wrote:
its wan on 2.6.20.6 + combined patch
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX
El Sábado, 14 de Abril de 2007 16:34, escribió:
Fernando,
Please apply the attached patch and send me any messages related to
IRQ_READY.
Thanks,
[EMAIL PROTECTED]:/usr/src/linux-2.6.20.6# patch -p1 /tmp/IRQ_READY
patching file drivers/net/wireless/bcm43xx/bcm43xx_main.c
Hunk #1 succeeded
El Sábado, 14 de Abril de 2007 16:34, escribió:
Fernando,
Please apply the attached patch and send me any messages related to
IRQ_READY.
Thanks,
Larry
second test, i disable the softmac debug to get the log more clear
i get the irq_timeout again grg.. (i will hope for help to develop in
hi all
i test my bcm4311 from my HP nx7400 with the wireless-dev git tree (mac80211)
and want to report some things:
i found that the speed is very similar to the old softmac driver (Good!)
networkmanager just connect on firstime (Good!)
[EMAIL PROTECTED]:~$ dmesg |grep bcm
bcm43xx_mac80211:
El Sábado, 26 de Mayo de 2007 16:45, Larry Finger escribió:
Fernando Toledo wrote:
i see above one warning that i dont know what mean .
I sent a patch to Michael today that fixes the condition that causes this
warning.
my interface was change from eth1 to wlan0
Your interface should
El Domingo, 27 de Mayo de 2007 21:59, Larry Finger escribió:
Fernando Toledo wrote:
[EMAIL PROTECTED]:~$ iperf -c 192.168.10.20 -p 5000
Client connecting to 192.168.10.20, TCP port 5000
TCP window size: 16.0 KByte (default
Hi , is possible to get a ad-hoc or master mode today?
with softmac o mac80211 trees?
i have a zd1211 device and i need to make a peer to peer link
thanks!
--
Dock Sud BBS
http://www.docksud.com.ar
telnet://bbs.docksud.com.ar
pgpsz7C6dC2iV.pgp
Description: PGP signature
Hi all
i think that mi bcm4311 was death in this week =(
i test with several kernels: debian stock, vanilla and wireless-dev
i test with 2 access points too.
i can scan good, i can connect a auth, but in few minutes die and stops ping
the ap.
the netwokmanager still show online , the dmesg (using
El Jue 08 Nov 2007, Mansour escribió:
Hello every one:
I just received a card that's supported by my laptop. I can not figure
out how to get it to work. What FW do I need, any drivers etc.
Any advice about how to proceed ?
you must install the firmware :
El Mié 21 Nov 2007, Larry Finger escribió:
John H. wrote:
uname -a
Linux laptop 2.6.23.1-49.fc8 #1 SMP Thu Nov 8 21:41:26 EST 2007 i686
i686 i386 GNU/Linux
fedora 8
on certain APs, the internet works for a long time then stops, and I
get authentication time outs, why? It usually
this messages are when i try to connect to the ap,
the log say associted, but i cant get ip:
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio disabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
hi all
i try to connect to another pc in ad-hoc mode
i using b43 module from wireless-dev on (wlan1)
and another pc is linksys wusb54g rev4 (wlan0)
boot pc's are debian testing
in pc 2 (wlan1) have 2.6.22.3-amd64
iwconfig wlan1 mode ad-hoc essid docksud channel 4
ifconfig wlan1 192.168.77.1 up
hi all!
i test my kernel with the rtpatch(real time)
now, b43 has that warnings:
i still connect fine.
Pid: 10, comm: softirq-tasklet Not tainted 2.6.24.3-rt3fer #8
[f8ad144f] b43_debugfs_log_txstat+0x4b/0x88 [b43]
[f8ace5ac] b43_handle_txstatus+0xb/0x61 [b43]
[f8ac4499]
Hi people
I have a bcm4311 on hp nx7400:
10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI
(rev 01)
I use a vanilla 2.6.24.4 that the radio button do not change the radio status
of my card.
Also, do not show the radio hardware enable/disable on the dmesg (with the
El Mié 02 Abr 2008, Fernando Toledo escribió:
Hi people
I have a bcm4311 on hp nx7400:
10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI
(rev 01)
I use a vanilla 2.6.24.4 that the radio button do not change the radio
status of my card.
Also, do not show the radio
El Jue 03 Abr 2008, Holger Schurig escribió:
i continue search and found that i forgot enable the
CONFIG_INPUT_POLLDEV option.
Thanks
Shouldn't this be done automatically by a proper entry in the
Kconfig file?
yes, but i forgot mark this option in menuconfig
and CONFIG_B43_RFKILL depends
El Vie 30 May 2008, Johannes Berg escribió:
On Fri, 2008-05-30 at 16:06 +0200, Michael Buesch wrote:
On Friday 30 May 2008 14:31:53 Johannes Berg wrote:
Since a while ago I've had trouble resuming when b43 was connected to
an AP while suspended.
I did a test today where this was the
37 matches
Mail list logo
