Hi,
Your new best friend is here :
http://www.youtube.com/user/DerekMolloyDCU/videos
Have fun ;)
On Thu, Oct 3, 2013 at 12:07 PM, c.edgar.ra...@gmail.com wrote:
Hi,
I have a BBB (Angstrom) with LCD7 from circuitco, and I test bonescript
the BBB and work's fine.
I need to create an
| MODE7 */
*0x070 0x2f /* KEY_ENTER gpmc_wait0.gpio0_3, INPUT | PULLDIS | MODE7 */*
Which is normally 0x954 and not 0x070 ( 0x070 is for GPIO0_30 )
So, am I right or wrong ? If I'm wrong, why in june, july, ... the address
of uart4_rx was 0x070, which is GPIO0_30 ?
Micka,
--
For more options
| PULLDIS | MODE7 */
0x04c 0x2f /* KEY_UP gpmc_a3.gpio1_19, INPUT | PULLDIS | MODE7 */
0x198 0x2f /* KEY_DOWN mcasp0_axr0.gpio3_16, INPUT | PULLDIS | MODE7 */
*0x154 0x2f /* KEY_ENTER spi0_d0.gpio0_3, INPUT | PULLDIS | MODE7 */*
;
};
On Tue, Oct 22, 2013 at 4:45 PM, Micka mickamus...@gmail.com wrote
Seriously ? No one care ? who is in charge of this change ? Who should I
contact ?
Micka,
On Tue, Oct 22, 2013 at 5:18 PM, Micka mickamus...@gmail.com wrote:
A correction to my mail, normally it should be 0x154, which was the case
before :
bone_lcd7_cape_keys_00A3_pins
Is it your Gerald, that is responsible of this code ?
Micka,
On Wed, Oct 23, 2013 at 2:30 PM, Micka mickamus...@gmail.com wrote:
Seriously ? No one care ? who is in charge of this change ? Who should I
contact ?
Micka,
On Tue, Oct 22, 2013 at 5:18 PM, Micka mickamus...@gmail.com wrote
Hi, I'm using the Ubuntu software from Robert Nelson.
Micka,
On Wed, Oct 23, 2013 at 5:11 PM, Hieu Duong hieuduong@gmail.com wrote:
Micka,
I did not see any issue with the GPIO-mapped buttons on LCD7 rev A3 when
using with latest Angstrom factory software 2013-09-04. The offset
You don't have a most recent Kernel that is working correctly with the SGX
drivers ?
3.2 it's very old
On Fri, Oct 25, 2013 at 8:52 AM, Giuseppe Iellamo pepp...@gmail.com wrote:
It seems to me not very fair to say we have a board with a 3d accelerator,
we sell it and we won't give you
But if we move to the kernel 3.12, the sgx will work?
On Oct 25, 2013 9:25 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Oct 25, 2013 at 2:22 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Fri, Oct 25, 2013 at 2:17 PM, Michael Mullin masmul...@gmail.com
wrote:
I would like
Robert Nelson, will it be hard to move to the kernel 3.13? You already
moved to 3.12...
On Oct 25, 2013 9:37 PM, Gerald Coley ger...@beagleboard.org wrote:
Most likely from what I hear, 3.14. But, maybe we can accelerate that.
Maybe.
Gerald
On Fri, Oct 25, 2013 at 2:35 PM, Micka mickamus
Gerald, give me a link to the post on the forum, and I will ask too. And
maybe other people ;-)
On Oct 26, 2013 1:26 AM, Gerald Coley ger...@beagleboard.org wrote:
3.8, I would say no. 3.14, maybe. I would ping TI on the e2e forum. There
are a lot of people asking, so more voices the better.
Ahahah, maybe we should create a post that everyone will post on it? Gerald
you should start.
On Oct 26, 2013 1:28 AM, Gerald Coley ger...@beagleboard.org wrote:
http://e2e.ti.com/support/arm/default.aspx
Gerald
On Fri, Oct 25, 2013 at 6:27 PM, Micka mickamus...@gmail.com wrote
Why don't you compile yourself the angstrom. With the flag that specify to
not install the X server. Ask to Gerald. ;-)
On Oct 23, 2013 3:17 PM, ebswift ebsw...@gmail.com wrote:
Hi there, simple question, on BeagleBone Black with Angstrom, how do I
configure it to boot straight to terminal,
Hi Robert Gerald,
We have some news here :
http://e2e.ti.com/support/arm/sitara_arm/f/791/p/298596/1043947.aspx#1043947
A new patch ? But my question, is it for the 3.2.x Kernel ? Or 3.8 ?
micka,
On Mon, Oct 28, 2013 at 8:54 PM, John Syne jsyne...@us-power.com wrote:
On 10/25/13, 11:44 AM
I strongly think that it's for the 3.8 kernel, But I'm waiting your
confirmation :)
On Tue, Oct 29, 2013 at 1:31 PM, Micka mickamus...@gmail.com wrote:
Hi Robert Gerald,
We have some news here :
http://e2e.ti.com/support/arm/sitara_arm/f/791/p/298596/1043947.aspx#1043947
A new patch
with the Distribution Ubuntu From Robert C Nelson ( no
desktop, only the console). Do I have to install something else ?
And my last question is about the LCD 7, I would like that my GUI work with
the LCD 7 . Do I have to install something ? Configure ?
Thank you,
Micka,
--
For more options
, Micka mickamus...@gmail.com wrote:
Hello,
There is something that I don't understand, it's how do you build the
Angstrom for the BBB ? ( maybe you should update the site )
Normally, there is a tutorial here :
http://downloads.angstrom-distribution.org/demo/beaglebone/
but, when I do
Hi,
I know this is common question, but I can't figure out how to fix it !
I'm connected to my beaglebone black with a serial cable and I would like
to start a gtk application.
My problem, is that I've the error message : cannot connect to X server
...
I'm on the distribution Ubuntu,
/5950124150612442561?authkey=CPuomMjyksqz4wE
I'm using the BeagleBone Black and the LCD 7.
Thx,
Micka.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop
Ok, It's the same bug as this one :
https://groups.google.com/forum/#%21topic/beagleboard/SXTaSUf4aSk
On Mon, Nov 25, 2013 at 10:26 AM, Micka mickamus...@gmail.com wrote:
Hi,
I would like to know if some people have notice some issue with the
touchscreen ?
I noticed, that when i put my
for the 4DCAPE-43T also.*
*No touch issues. Installed a few drawing apps and it performs nicely*.
Do you know if you have a more recent image that is working correctly ? I'm
working with bone30 .
On Mon, Nov 25, 2013 at 3:27 PM, Micka mickamus...@gmail.com wrote:
Ok, It's the same bug as this one
Hi,
Well, I'm working with the BaudRate 38400 and I don't have any problem. I
didn't try further.
micka,
On Tue, Dec 3, 2013 at 3:13 AM, hbiglar...@gmail.com wrote:
Hi all,
Interesting Work! What is the max baud rate you can get from this rs485
cape on BBB?
Haik
On Friday, June 21
?
Thanks,
Haik
On Tuesday, December 3, 2013 3:40:39 AM UTC-5, Mickae1 wrote:
Hi,
Well, I'm working with the BaudRate 38400 and I don't have any problem. I
didn't try further.
micka,
On Tue, Dec 3, 2013 at 3:13 AM, hbigl...@gmail.com wrote:
Hi all,
Interesting Work! What is the max
Why not disabling the cap manager at the boot (is it possible?) and later
push yourself the config that you want in the slot?
Micka,
On Dec 10, 2013 5:50 AM, David Lambert d...@lambsys.com wrote:
On 12/09/2013 05:12 PM, Robert Nelson wrote:
On Mon, Dec 9, 2013 at 2:15 PM, David Lambert d
Just an idea, but maybe we should create a software, hardware, kernel
mailing list ?
On Mon, Dec 30, 2013 at 11:23 AM, Bogdan Teodorescu
bogdan.teodore...@quartzmatrix.ro wrote:
50 % true
The best hardware is useless without an operating systems. Most of this
forum users are
Why do you want to use it with Angstrom ? Angstrom is going to die .
I had the same problem as you in the past ... I find out that with the
Ubuntu Distribution from Robert C Nelson, it's easy to modify the kernel,
creating a patch, add a patch, .
Micka,
On Tue, Dec 31, 2013 at 2:11 PM
There:
https://groups.google.com/forum/#!topic/beagleboard/sAsZYPJ_DPg
Enjoy !
On Tue, Dec 31, 2013 at 2:22 PM, David Hirst hirst...@gmail.com wrote:
OK!
Could you point me to some form of how to
Thanks
--
For more options, visit http://beagleboard.org/discuss
---
You received this
:
You're missing a bunch of information needed to help troubleshoot/ For
starters how fast ? Which distro ? Which kernel driver are you using ? etc
etc etc.
On Fri, Jan 3, 2014 at 8:55 AM, Micka mickamus...@gmail.com wrote:
Hi,
I would like to know if someone has experienced data sliced in two
linux ( 3.8 ) is not a real time kernel
maybe i should apply the kernel PREEMPT_RT ?
I'm really lost
Micka,
On Sat, Jan 4, 2014 at 9:10 AM, Dave Hylands dhyla...@gmail.com wrote:
Hi,
On Fri, Jan 3, 2014 at 4:08 PM, Micka mickamus...@gmail.com wrote:
Ok,
Well, the baudrate
Problem Solved !
By disabling the preempt mode in the kernel config I have some fopen
call in my program which is not a good idea in real time application
Thx everyone for the help !
On Mon, Jan 6, 2014 at 12:58 PM, Micka mickamus...@gmail.com wrote:
Hi,
Thanks for your answer
But Who ?
I'm willing to pay someone to fix the Jitter problem of the LCD, but who
can fix that ?
I'm also planning to fix that by myself if no one want to do it, I'm not
afraid to put some printk everywhere to find out where is this *** bug ? Do
we know where this problem is situated ? Which
OK,
Maybe it's time we work together and try to fix this bug. *A beaglebone
black that doesn't support correctly the touchscreen, it's a SHAME !*
So I'm going to try to fix it by myself =
I prefer to put my conclusion here, because I don't hink everyone has the
time to read my research :
Lan Kidd, For the patch, I'm sure that Robert Nelson will include it on the
next release of the kernel, same for Koen !
Terry Storm, well not really :) , the noise come when you remove your
finger, always at this time when the pressure is not enough we got
some crazy x and y value ..
your answer is here ( with more research ;) ) =
https://groups.google.com/forum/#!topic/beagleboard/MdOBsXNXzEI
On Mon, Jan 13, 2014 at 3:07 AM, Daniel Metcalf kb3...@gmail.com wrote:
I have installed Ubuntu 12.04.3 onto my BBB and have writen a custom GUI
with Gtk which I run calling sudo
I would love to create a patch for you, but i don't know how I tried
to commit the result, but I got :
beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git commit
# On branch v3.8.13-bone35
# Changes not staged for commit:
# (use git add file... to update what will be committed)
#
Hi,
I'm curious to know why it takes 10 second to login with ssh when
/etc/resolv.conf is empty . And when there is something, it takes less than
1 second to login !
Micka,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed
Yes, that was perfect, thx you !
On Wed, Jan 15, 2014 at 5:05 PM, Jay Nugent j...@nuge.com wrote:
Greetings,
On Wed, 15 Jan 2014, Micka wrote:
Hi,
I'm curious to know why it takes 10 second to login with ssh when
/etc/resolv.conf is empty . And when there is something, it takes less
of the Kernel .
On Mon, Jan 20, 2014 at 2:32 PM, André Prado andreprad...@gmail.com wrote:
Micka thank you so much for your work!
We can compile this driver with Linaro and load it dynamically right?
Using mobprobe
Or am i mistaken?
Cheers
On Mon, Jan 13, 2014 at 11:58 AM, Micka mickamus
by following the file that I previously sent .
save the file, go to the folder linux-dev, and rebuild the kernel :
./tools/rebuild something .sh
micka,
On Tue, Jan 21, 2014 at 7:00 AM, Will Kostelecky
will.kostele...@gmail.comwrote:
Micka:
I second the huge thanks from Andre for the work you have
Hi,
About the RS485 support on the BBB, you have to modify the driver omap
serial and control the gpio that you want. But if you want a quick
solution, i already made a patch for that :)
You just need to :
git clone git://github.com/RobertCNelson/linux-dev.git
cd linux-dev/
git checkout
I never used rebuild_deb.sh . I don't know what it is for .
On Wed, Jan 22, 2014 at 9:30 AM, Will Kostelecky
will.kostele...@gmail.comwrote:
Micka:
I have gotten to the point of rebuilding the kernel and have what may be a
dumb question before I press enter...
In tools I have
and install it in your sdcard.
Which means that soon, the fix will be implemented to each release of
ubuntu/debian from Robert Nelson !
Also Will Kostelecky, the script to install the kernel, only work for a
Robert Nelson image ( ubuntu/debian ) .
Micka,
On Thu, Jan 23, 2014 at 8:45 AM
What ? You have an angstrom image ? You should change Angstrom it's
over go to the Ubuntu/Debian image !
On Thu, Jan 23, 2014 at 10:39 AM, Will Kostelecky will.kostele...@gmail.com
wrote:
:-(
On Thu, Jan 23, 2014 at 8:36 AM, Micka mickamus...@gmail.com wrote:
Well,
First, thx
Which means 11 year :p
On Thu, Jan 23, 2014 at 5:03 PM, Maxim Podbereznyy lisar...@gmail.comwrote:
For the new am335x processors TI promises 10 hours of work
23 Янв 2014 г. 19:44 пользователь Philip Polstra ppols...@gmail.com
написал:
I have a collection of Beagles that run 24/7, some
some tips to expand the life of your beagle :
http://raspberrypi.stackexchange.com/questions/169/how-can-i-extend-the-life-of-my-sd-card
On Fri, Jan 24, 2014 at 8:14 AM, liyaoshi liyao...@gmail.com wrote:
For industry product, if you can mount it with read only , you'd better do
In some
What is the baudRate ? Can you spy the communication with an other device ?
( serial adapter rs485/rs232 )
In my case, baudrate 38400 work pretty well, without noise.
and please don't UNDERLINE !
Micka,
On Mon, Jan 27, 2014 at 10:54 AM, ashishagrawal@gmail.com wrote:
Hi All,
I have
Well, It's good that it works in other device :)
Micka,
On Mon, Jan 27, 2014 at 9:32 PM, Terry Storm terrystor...@gmail.com wrote:
Brilliant
Thank you Robert, and thank you Micka for the patch.
Just ran it up, booted from SD card and I cant fault the touch in the few
minutes I have
. c_lflag = ( ~ ICANON ) ;
mode . c_lflag = ( ~ ECHO ) ;
rv=tcsetattr ( pContext-iHandlerConnection , 0 /* no special action */ ,
mode );
On Tue, Jan 28, 2014 at 11:36 AM, ashishagrawal@gmail.com wrote:
Hello Micka,
Thanks for your prompt response. I was using 115200. Now I have tried
By curiousity, when are you planning to release this cap ? :p
On Tue, Jan 28, 2014 at 4:28 PM, marcm...@gmail.com wrote:
Hi Eric,
Yes adding the compass as well could easily be done as we are already
using the MPU-6050 and it is a compatible replacement.
The mini-PCI-e is the socket that a
Zachary,
For your information, you don't need anymore to patch the kernel :p =
https://github.com/RobertCNelson/linux-dev/commit/823fd45781f6e176ee1dc87062c95a010c7af588
On Tue, Jan 28, 2014 at 4:21 PM, Zachary Thorson zachthor...@gmail.comwrote:
Now, I have developed an application which
Hi Louis,
I'm totally lost with cross compile with QT . I've the ubuntu
distribution image from Robert Nelson.
Beagle :
ubuntu@arm:~$ uname -a
Linux arm 3.8.13-bone35 #2 SMP Mon Jan 13 14:52:52 CET 2014 armv7l armv7l
armv7l GNU/Linux
ubuntu@arm:~$ qmake -version
QMake version 2.01a
Using
your answer is overthere =
http://www.howtoforge.com/linux-basics-set-a-static-ip-on-ubuntu
micka,
On Thu, Feb 6, 2014 at 2:06 PM, mc6...@gmail.com wrote:
Hello
Excuse me if this topic has been covered, but I quickly did a search on
Network and didn't find an answer. I'm trying to look
Thx I didn't see that But It means also that I can't use the
toolchains qt from angstrom because it's compiled with the hf .
does someone know how to cross compile qt ? I don't need a full explanation
just a little explanation .
Any idea ?
On Thu, Feb 6, 2014 at 3:20 PM, Robert
, Micka mickamus...@gmail.com wrote:
Thx I didn't see that But It means also that I can't use the
toolchains qt from angstrom because it's compiled with the hf .
does someone know how to cross compile qt ? I don't need a full
explanation just a little explanation .
Any idea
with a gtk or qt application ?
On Fri, Feb 7, 2014 at 2:58 PM, Giovanni Paolini paoli...@gmail.com wrote:
Hi!!
My English is bad, Thanks for all the assistance they have given me in
this ad.
As I said in the subject, I need to hide the mouse.
Anyone know?
Giovanni
--
For more options,
you should watch this video = https://www.youtube.com/watch?v=wui_wU1AeQc
Enjoy,
On Wed, Feb 12, 2014 at 1:14 PM, matt engint...@gmail.com wrote:
Hi,
I got a BBB.
I connected a LED to its GPIO1_16 pin, which I tried to turn on and off
using the GPIO configuration in the code below.
For
Hi,
i wanted to know if someone has successfully calibrate a screen ?
Because I can't find ts_calibrate .
Micka,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe
Thx for the quick answer, it was perfect.
Micka,
On Thu, Feb 20, 2014 at 3:12 PM, brian larochelle
larochelle.br...@gmail.com wrote:
I had the same problem with a debian rootfs, when using:
sudo ts_calibrate
I worked around it by setting a root password, then su to root, set
to make it Happen.
I wanted to fix the issue with the LCD ( Jitter Problem) = I just needed
to find out where was the driver source = I fixed it !
Micka,
On Fri, Feb 21, 2014 at 4:14 PM, Bas Laarhoven s...@xs4all.nl wrote:
Good to hear, does that also include thinking about paying your debt
...@beagleboard.orgwrote:
On Wed, Jan 29, 2014 at 4:09 PM, Robert Nelson robertcnel...@gmail.comwrote:
Lets keep this going, round 4...
First, for tracking please report all bugs to:
http://bugs.elinux.org/projects/debian-image-releases
Fixes:
3.8.13-bone37 - 3.8.13-bone39
* rs485 support from Micka
Ok thx, I figured out how to disable lightdm :
sudo update-rc.d lightdm disable
thx,
On Tue, Feb 25, 2014 at 2:50 PM, Robert Nelson robertcnel...@gmail.comwrote:
On Tue, Feb 25, 2014 at 7:47 AM, Micka mickamus...@gmail.com wrote:
Hi,
I'm using the image
http://rcn-ee.net/deb
you configure your workspace
I don't have time to argue with it, it's just a simple matter of accepting
the evolution ..
Micka,
On Wed, Mar 5, 2014 at 4:55 PM, c...@isbd.net wrote:
Karl Longen 2frikkincra...@gmail.com wrote:
BTW you have never tried to code pages and pages using
Can we stop this discussion ?
And to make everyone happy, there is eclipse + vim = http://eclim.org
Micka,
On Mar 7, 2014 7:04 AM, Alexander Holler hol...@ahsoftware.de wrote:
Am 06.03.2014 20:54, schrieb Karl Longen:
I have seen few people using Memacs, but it was a rarity, and limited
I wanted to know if someone got recently a LCD7 CAP ? Because I'm still
waiting since January .. !!!
On Mon, Mar 10, 2014 at 3:45 PM, Gerald Coley ger...@beagleboard.orgwrote:
Actually most shops do. That is why we can never catch up.;
Gerald
On Mon, Mar 10, 2014 at 9:40 AM, Satz
Hi,
I wanted to tell you that in my company we used the BBB to evaluate the
potential of a product based on Linux.
For this purpose we had to develop our CAP RS485. This Cap is fully
compatible with the BBB ( since my patch has been implemented to the Kernel
by Robert Nelson ) .
Now, we are
Are you sure ? =
https://github.com/RobertCNelson/linux-dev/blob/am33x-v3.8/patch.sh#L847
On Tue, Mar 11, 2014 at 7:38 PM, r...@krda.ca wrote:
Hi Micka,
Would you be able to send me the driver you compiled with these changes?
RobertCNelson's latest builds (-40) have ti_am335x_tsc.ko from
Any news about it ? I would like to buy one
Thx,
On Sat, Feb 15, 2014 at 5:05 PM, yugn...@gmail.com wrote:
I'm not sure of a pricepoint- we are working on a similar beta product
used to track delivery systems and i can get an chinese made tracker with
some of the capability you mention
In my case I don't need the MMC because I need all the pin for the LCD7
UART4 UART1.
About the PRU, I don't neeed either. Thx for the tips.
Micka,
On Mon, Mar 17, 2014 at 4:45 PM, José Luis Redrejo jredr...@gmail.comwrote:
2014-03-17 16:35 GMT+01:00 Charles Steinkuehler char
TI has nothing to do with beagleboard.org but Gerald Coley is a TI Engineer
?
Which part I didn't understand ?
Micka,
On Tue, Mar 18, 2014 at 5:44 PM, David Anders danders@gmail.com wrote:
Venkat,
On Monday, March 17, 2014 4:36:42 PM UTC-5, Venkat Bommakanti wrote:
On Monday
Don't take it personally, I've nothing against you, or TI ... . You did a
great Job.
Micka,
On Tue, Mar 18, 2014 at 7:53 PM, Gerald Coley ger...@beagleboard.orgwrote:
The part that says does not TI invests into the operation of
BeagleBord.org other than some of my day job and none of my
Hello, what is the status?
Micka,
On Mar 17, 2014 5:39 PM, marcm...@gmail.com wrote:
Hi, yes we are progressing. We have just ordered the first batch of
boards and will be assembling and testing in the next 14 days.
We will be putting some more updates on our twitter feed soon...
@aSanCloud
Hi,
I'm developing applications that communicate with IPC, some of them are
using uart.
For the lcd7, I'm using Xinit with QT.
Most of the time it works, but at a specific time which involve ipc, shared
memory, uart and mutex: It crash my touchscreen .
The cursor is fixed at a specific
Well, after some trace in the kernel, I discovered that the problem was not
in the kernel.
the problem was electronics, some stupid relay that didn't
have freewheeling diode
On Thu, Apr 3, 2014 at 10:17 AM, Micka mickamus...@gmail.com wrote:
Hi,
I'm developing applications
Hi,
I've a BBB under the debian distribution, and I got this error :
ext4_find_entry:1273: inode #13
What that means ? I'm working with the SDCard .
Thx,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
I just installed the package :
insserv: warning: script 'K01script-initd-' missing LSB tags and overrides
insserv: warning: script 'script-initd-' missing LSB tags and overrides
insserv: warning: script 'K02script-initd-' missing LSB tags and overrides
insserv: warning: script 'script-initd-'
How,
In my network I'm receiving too much packet. I would like to deactivate the
multicast, how is this possible at boot? Before the interface start...
Micka,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
http://hackaday.com/2014/04/11/beaglebone-black-and-fpga-driven-led-wall/
cool ;)
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails
no it's not ;)
http://elinux.org/images/d/dc/TFC-S9700RTWV35TR-01B.pdf
== Interface RGB 24bit
On Fri, Apr 11, 2014 at 4:20 PM, Gerald Coley ger...@beagleboard.orgwrote:
LCD7 is 16 bit color.
Gerald
On Fri, Apr 11, 2014 at 7:54 AM, Mirko Fucci mirko.fu...@gmail.comwrote:
Hi
, Apr 11, 2014 at 4:31 PM, Gerald Coley ger...@beagleboard.orgwrote:
So. If the signals are not connected it is being used as a 16 bit
display because that is all that is connected from the processor. 16bits.
Gerald
On Fri, Apr 11, 2014 at 9:30 AM, Micka mickamus...@gmail.com wrote:
I'm
I use xinit, it's light enough.
But if someone can compile qt4.8 for us with the extension qws and the
touchscreen, it would be awesome..
Micka,
On Apr 11, 2014 6:37 PM, David Lewin dlewin...@gmail.com wrote:
just a side question : I just need to have my Qt GUI app to be shown,
without
Well, did someone manage to make it work ?
It would be cool to share with us :) .
On Fri, Apr 11, 2014 at 7:13 PM, David Lewin dlewin...@gmail.com wrote:
Micka I did this,as qws is enabled in configure by default, but it didn't
seems to be taken in account
2014-04-11 18:42 GMT+02:00 Micka
Nelson robertcnel...@gmail.comwrote:
On Thu, Apr 17, 2014 at 9:38 AM, Micka mickamus...@gmail.com wrote:
Hi,
My beagle received a multicast attack ( from an equipment not well
configured ) .
Since then, the LCD doesn't work anymore, but when I change the BBB with
a a
new one
Yes those events are related, because it's the second time that I lost a
BBB when I've a UDP attack . Most of the time, the BBB freeze completely.
On Thu, Apr 17, 2014 at 4:47 PM, Robert Nelson robertcnel...@gmail.comwrote:
On Thu, Apr 17, 2014 at 9:38 AM, Micka mickamus...@gmail.com wrote
, 2014 at 9:59 AM, Micka mickamus...@gmail.com wrote:
export SLOTS=/sys/devices/bone_capemgr.9/slots
sudo echo BB-BONE-LCD7-01-00A0 $SLOTS
[ 2058.656875] bone-capemgr bone_capemgr.9: failed to load firmware
'BB-BONE-LCD7-01--00A0.dtbo'
echo: write error: No such file or directory
, Micka mickamus...@gmail.com wrote:
root@beaglebone:/# echo BB-BONE-LCD7-01:00A0 $SLOTS
[ 2688.700962] bone-capemgr bone_capemgr.9: failed to load firmware
'BB-BONE-LCD7-01-00A0.dtbo'
bash: echo: write error: No such file or directory
root@beaglebone:~# ls /lib/firmware/BB-BONE-LCD7
It's broken I said... But one thing I'm sure. It's that the bbb don't
handle well a flood on his ethernet port.
Micka,
On Apr 17, 2014 5:25 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Thu, Apr 17, 2014 at 10:24 AM, Micka mickamus...@gmail.com wrote:
with the working BBB ( same SDCard
Piotr, everything works fine, because the kernel has been modified to
filter the noise that came when you remove your finger. I don't know why,
but it happen...
Micka,
On Apr 18, 2014 4:53 PM, Piotr Murawski michc...@o2.pl wrote:
Hi,
Actually I have posted what I have discovered. The problem I
For your information, there is also a RS485 Cap that is working very well .
As he said : pass the RS485 stucture along with the termios information
to setup the port
On Tue, Apr 29, 2014 at 4:24 PM, lexduples...@gmail.com wrote:
Yes you can use the serial ports for RS485. You will need a
Any news?
Micka,
On Apr 2, 2014 2:31 PM, marcm...@gmail.com wrote:
All the options listed above;
CAN
ODBII via SN1110 OBD to UART Interpreter
Mini-PCIe for 3G-LTE/GPS card
6 axis accel and gyro
RTC
USB expansion for WiFi dongle
Bi directional GPIO for vehicle signals (Ignition in GPIO_0
Robert It works perfectly your Debian Image with the RS485 I
don't understand what is the problem .
Regards,
On Wed, May 28, 2014 at 5:31 PM, Robert Nelson robertcnel...@gmail.comwrote:
On Wed, May 28, 2014 at 2:38 AM, lexduples...@gmail.com wrote:
Sorry for taking so
Hi Robert,
What do you think about that ? ( bellow )
Could you change the kernel 3.8 to include this touchscreen driver update ?
Thx,
Micka.
-- Forwarded message --
From: Roop Singh r...@krda.ca
Date: Mon, Mar 24, 2014 at 12:59 AM
Subject: Re: [beagleboard] Re: Touchscreen
How did you got qws working? Normally qt on Debian is not compiled with
qws... Am I wrong?
Micka,
On Jun 4, 2014 2:01 AM, Andersan Xiley andersanxi...@gmail.com wrote:
Hi,
If I run withou qws, i got this error:
root@beaglebone:~# ./App
QWSSocket::connectToLocalFile could not connect
William Hermans, how did you controlled the GPIO ?
The only way that I know is with :
/sys/class/gpio/gpio%d/value
but you talk about mmap ? How did you use it with this
/sys/class/gpio/gpio%d/value ?
Thx you,
Micka,
On Tue, Jun 3, 2014 at 11:57 PM, William Hermans yyrk...@gmail.com
However, the mic is not powered as no bias is being provided
If the micro is powered by a PIN, you have to tell the cape manager through
the dtbo to power the micro .
Micka,
On Wed, Jun 4, 2014 at 1:11 PM, Tristan Phillips tris.phill...@gmail.com
wrote:
In addition, my engineer tells me we
There =
git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v3.8 -b tmp
./build_kernel.sh
edit the files that you want
then =
tools/rebuild.sh
Micka,
On Wed, Jun 4, 2014 at 1:35 PM, Tristan Phillips tris.phill...@gmail.com
wrote:
Hi,
I'm
With this command :
git checkout origin/am33x-v3.8 -b tmp
you will get the last kernel version of the branch 3.8 , which is
today; beaglebone
3.8.13-bone55
Micka,
On Wed, Jun 4, 2014 at 2:23 PM, Tristan Phillips tris.phill...@gmail.com
wrote:
Is this specific to 3.8.13-bone47 and the beagle
yes on a linux pc.
( it will kill you to compile the kernel on the bbb . it already takes
time on the PC )
look at this command provided by Robert Nelson = ./tools/install_kernel.sh
( something like that ).
Micka,
On Wed, Jun 4, 2014 at 2:50 PM, Tristan Phillips tris.phill
, Mickae1 wrote:
yes on a linux pc.
( it will kill you to compile the kernel on the bbb . it already
takes time on the PC )
look at this command provided by Robert Nelson =
./tools/install_kernel.sh ( something like that ).
Micka,
On Wed, Jun 4, 2014 at 2:50 PM, Tristan Phillips
)
look at this command provided by Robert Nelson =
./tools/install_kernel.sh ( something like that ).
Micka,
On Wed, Jun 4, 2014 at 2:50 PM, Tristan Phillips tris.p...@gmail.com
wrote:
Thank you very much :)
I guess I need to do this on a linux pc, not the BBB?
What do I do after doing all
U should move on to Debian Most of us use Debian. Angstrom.. Well...
See... No support...
Micka,
On Jun 9, 2014 12:38 AM, Andersan Xiley andersanxi...@gmail.com wrote:
Hi Micka,
My project uses angstrom.
I think i have 2 options. Either compile for X11 or rotate the screen on
QT.
I
Hi,
did someone manage to make the gettext function working ?
a simple hello world :
#include locale.h
#include gettext.h
int
main (void)
{
setenv (LANGUAGE, fr, 1);
setlocale (LC_ALL, );
bindtextdomain (toto, /foo/bar/baz);
textdomain (toto);
gettext (toto);
return 0;
}
$ gcc
1 - 100 of 335 matches
Mail list logo
