Hi I got bounced this morning just trying again...
Danny
___
This List is provided by the CC Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
The wiring in my Viking was all routed in and during the molding of the deck...
The PO routed ALL the new wiring in the Bilge. That was pretty awesome!
I've been tackling new wires as they are needed finding new routes, tucked as
inconspicuously as possible. As Ed said, it is an interesting
That was me that talked about the super furl.
The beauty of the superfurl was the quality for the price and not needing a new
sail. I installed the furler and new slugs on the sail myself myself.
I wouldn't hesitate to use another one on my boat.
I would have to look but, I think I paid
I bought this stuff last year. It is really great stuff. I set my handrails,
traveler and my new hatch with it. I'll be using it to set the rest of my deck
hardware as well!
http://www.pbase.com/mainecruising/image/98525514
Here is the article about bedding deck hardware.
I was down at my boat yesterday and the bottom job and new boot stripe look
fantastic!! Lolita look absolutely beautiful!I posted some photos if anyone is
interested. You should be able to scroll through and see a bunch.
http://1drv.ms/1eq8ANe
-- Original Message --
From: Edd
Edd great video...it cracked me up actually with that music and the intro...
How did you get on board when they were rolling out over the water? I was
expecting the whole ride out and down into the liquid but then, BAM, we're
underway!! LOL Congrats on the launch. I'm hoping for a splash
+1 on the figure eight. My oday 22 did not have a traveler for the main and
the main sheet was very long. I started out cooling and it always git all
jammed up untiltel I readabout and started using the figure eight. Never
twisted up again
From my Android phone
Original message
I have had so many of those rule pumps fail on me, I went to a pair of gusher
diaphragm pumps, mounted up high and dry, with hoses to the bilge. I ran a
rule float switch to one which failed that first year. Now I have sea choice
float switch that has been working for 2 seasons, going on 3.
Wow!! Congratulations! that electric motor sounds awesome!DannyLolita1973
Viking 33Westport Point, MA
-- Original Message --
From: Alex Giannelia via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Stus-List ELECTRIC YACHT LAUNCH!
Date:
I installed the X5 with a p70 head unit last year and installed the flux gate
in the L shaped settee, low and near the center just aft of the head.I still
haven't got the stupid thing working however...
-- Original Message --
From: dwight via CnC-List cnc-list@cnc-list.com
To:
My Viking 33 was converted when I bought her. It seems like it was no small
job for my boat. Cutting the fiberglass tube that the rudder shaft ran through
to attach the quadrant, beefing up the bulkhead to take the pressure of the
stops and then some fiberglass repair work. Not that any of
Hi Guys, Okay so,
I was finally going to head out for a sea trial. I had the engine completely
warmed up, topped off with gas, water and the like.
Just before I was going to pull away from the dock and move out to the mooring.
She stalled, I always need to use choke to start it back up but,
go Fred!!!
-- Original Message --
From: Frederick G Street via CnC-List cnc-list@cnc-list.com
To: Jerome Tauber jrtau...@aol.com, cnc-list@cnc-list.com
Subject: Re: Stus-List CC 38mkIII
Date: Thu, 19 Jun 2014 11:38:49 -0500
How about considering a Landfall 38? Pretty much the
On my O'day 22 I used a cow hitch with one long sheet and the cow hitch in the
middle. There was no chance of that ever coming out.
-- Original Message --
From: Sam Salter via CnC-List cnc-list@cnc-list.com
To: pete.shelqu...@comcast.net, CnC cnc-list@cnc-list.com
Subject: Re:
My wife swears by ginger. Ginger candy, ginger snaps, ginger this, ginger
that. Always has it on board.
Danny
From my Android phone
Original message
From: Wally Bryant via CnC-List cnc-list@cnc-list.com
Date: 06/24/2014 10:21 AM (GMT-05:00)
To: cnc-list@cnc-list.com
I don't know anything about this boat but, I used to keep my last boat at the
Swansea Marina and it is pretty close by if I can help in any way. I do have
friend still at the Swansea Marina. If that is where the boat is, I bet he
could find some things out about it.
Please note: message
Hi, I have a Viking 33 with an Atomic 4. I can only comment from my
experience with this one boat and Atomic 4 (well 2 as I replaced the original)
Comments below in bold type ![if !supportLists]1. ![endif]Is there
generally an ldquo;offrdquo; or kill switch other than the ignition key?
and parts source. I picked up their split shaft
coupling, oil dipstick extension, some water pump parts and the alternator
tensioner recently.
Peter Fell
Sidney, BC
Cygnet
CC 27 MkIII
From: Danny Haughey via CnC-List
Sent: Monday, July 07, 2014 7:55 AM
To: bstrat...@falconnect.com ; cnc-list@cnc
I couldn't agree more. The fees make everyone raise their prices as well.
Should be FEEbay Danny
-- Original Message --
From: David via CnC-List cnc-list@cnc-list.com
To: CNC CNC cnc-list@cnc-list.com
Subject: Re: Stus-List FleaBay scores - anyone get anything good lately?
the funny thing is that they even left the stus-list in the subject.
-- Original Message --
From: Chris Price via CnC-List cnc-list@cnc-list.com
To: j...@dellabarba.com j...@dellabarba.com, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Terrible
I'd pitch in...
-- Original Message --
From: Fair, Mike via CnC-List cnc-list@cnc-list.com
To: Robert Abbott robertabb...@eastlink.ca, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Terrible Ordeal(HELP)!!! John Irvin
Date: Fri, 11 Jul 2014 14:31:44 +
If
Geeze skip, I thought you were in New Hampshire... there I was going on about
Kittery and such. LOl
You really are close by! What Marina are you at? I may be looking for a new
home for Lolita...
From my Android phone
Original message
From: Burt Stratton via CnC-List
Hi Stu,
Actually every email I get simply shows CC List in the from field.
I do however get both email addresses to populate when I hit reply.
Just an FYI
Danny
Lolita
1973 Viking 33
Westport Point, MA
-- Original Message --
From: Hoyt, Mike via CnC-List cnc-list@cnc-list.com
Except the hand...
From my Android phone
Original message
From: Dennis C. via CnC-List cnc-list@cnc-list.com
Date: 07/16/2014 12:31 PM (GMT-05:00)
To: Nate Flesness nateflesn...@gmail.com,CnClist cnc-list@cnc-list.com
Subject: Re: Stus-List Genoa/Jib Sheet diameter on a
Ahh Fair winds on your first trip my Viking Brethren!!! You have to join the
Yahoo Viking group too. There are a couple of really smart guys there. One of
which is a member of this list as well. I think you are the 3rd or fourth V
33/34 owner on this list. You are in for some fine sailing!!!
That's funny!
Congrats Stu! Both my mother in law and my mother have had that done recently
and they are really quite happy with the results! My mother jokes about not
recognizing the old woman staring back at her from the mirror!
From my Android phone
Original message
thats quite a score!!!congrats!
-- Original Message --
From: Dennis C. via CnC-List cnc-list@cnc-list.com
To: CnClist CnC-List@cnc-list.com
Subject: Stus-List eBay Scores!
Date: Sun, 3 Aug 2014 19:42:52 -0500
Touche' had anodized alloy primaries (Barlow 28's), secondaries
would you be buying a new outboard?
If you swap that inboard out for a moyer exchange engine and you do the work
yourself you could have a brand new updated fuel injected engine for about
$5000. The moyer exchange engine comes with all the cool little update they
offer on the site too. The
depending on how much time you have. i.e. if you were planning on next spring
for this upgrade. You could rebuild this thing yourself with the help of the
Afourians in the Moyer Marine forums. There is a pretty good thread over there
recently where a guy did exactly that and it cost him like
I would add re-wiring the harness and any wires to the coil and engine. Moyer
sells a kit for that or you could just buy some marine cable. I was having
trouble with my engine stalling and not wanting to re-start for an hour at a
time. I really could identify with your stranded situations.
Marek, In your emails, I hear some of the sentiments I had before we changed
boats. Our outboard became somewhat unreliable (I think that I eventually
traced this down to fuel filters and fuel itself) and it was a really bad
feeling #65533; every time we needed to start the motor I could
OMG...
If i kept that that kind of accounting foe my boat I'd probably want to shoot
myself!!! LOL
There is LOTS of things I conveniently forget that I had to pay for!!! LOL
Danny
Lolita
1973 Viking 33
Westport Point, MA
-- Original Message --
From: Wally Bryant via CnC-List
I basically follow the article on PBase to the
letter...http://www.pbase.com/mainecruising/rebedding_hardware
-- Original Message --
From: Kevin Driscoll via CnC-List cnc-list@cnc-list.com
To: CC List cnc-list@cnc-list.com
Subject: Stus-List Re-Bedding / Filling Drilling w_Epoxy
Original message
From: Danny Haughey djhaug...@juno.com
Date: 08/09/2014 5:32 PM (GMT-05:00)
To: derlic...@gmail.com,mda...@darkstar.ca
Subject: Ok more atomic 4 issues...dammit!
Okay so no wind today...
I pulled up to the gas dock, topped off water and fuel, loaded up
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Saturday, August 09, 2014 5:38 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Ok more atomic 4 issues...dammit!
Original message
From: Danny Haughey djhaug...@juno.com
Date: 08/09/2014 5
OMG!
Where are you now?
From my Android phone
Original message
From: Andrew Burton via CnC-List cnc-list@cnc-list.com
Date: 08/10/2014 5:43 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Subject: Stus-List Viking 33
Sitting in Cuttyhunk and saw the most beautiful Viking
of Danny Haughey via
CnC-List [cnc-list@cnc-list.com]
Sent: Saturday, August 09, 2014 2:37 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Ok more atomic 4 issues...dammit!
Original message
From: Danny Haughey djhaug...@juno.com
Date: 08/09/2014 5:32 PM (GMT-05:00
Haughey via CnC-List
Sent: Saturday, August 09, 2014 5:38 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Ok more atomic 4 issues...dammit!
Original message
From: Danny Haughey djhaug...@juno.com
Date: 08/09/2014 5:32 PM (GMT-05:00)
To: derlic...@gmail.com,mda
-list@cnc-list.com
Subject: Re: Stus-List Ok more atomic 4 issues...dammit!
Date: Wed, 13 Aug 2014 08:38:52 -0700
Are you using a hot enough plug and premium fuel?
On Wednesday, August 13, 2014 11:33:11 AM, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
- Forwarded Message
good! Petar HorvaticSundowner76 CC 38MkIINewport, RI
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Wednesday, August 13, 2014 11:33 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ok more atomic 4 issues...dammit! Alright, the saga
...@juno.com, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Ok more atomic 4 issues...dammit!
Date: Wed, 13 Aug 2014 08:38:52 -0700
Are you using a hot enough plug and premium fuel?
On Wednesday, August 13, 2014 11:33:11 AM, Danny Haughey via CnC-List
cnc-list@cnc
be worth a new engine
Dwight Veinot
CC 35MKII, Alianna
Head of St. Margaret's Bay, NS
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: August 13, 2014 12:33 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ok more atomic 4 issues...dammit
Hi Russ, not to worry. I'm working the issue here, on Moyer forums and with a
couple of fellow Viking owners. Sending all the same info and. You may notice
a cut and paste here from the Moyer site and vice versa
From my Android phone
Original message
From: Russ Melody
solved.
Keep working at it, you will find the problem.
Rob Abbott
AZURA
CC 32 - 84
Halifax, N.S.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: August 13, 2014 12:33 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Ok more
looks like she washed ashore...
-- Original Message --
From: Della Barba, Joe via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Stus-List what happened to this boat?
Date: Mon, 18 Aug 2014 14:38:23 +
HI Skip,I know those waters well. I spent about 4 years sailing mount hope
bay. Nice job on the resurrection of you boat! Have you named her?
-- Original Message --
From: Burt Stratton via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Subject: Stus-List Maiden
Hi all,
I'm currently in a Viking 33. I am 6'-0 tall and I cannot stand up in most of
the boat and I'm tired of hitting my head. The wife and I are starting to
cruise more and find that after 3 days on board we NEED to get off. I love how
this boat sails! she handles beautifully and has a very
.
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Tuesday, August 19, 2014 11:01 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Up-sizing boats
Hi all,
I'm currently in a Viking 33. I am 6'-0 tall and I
:00max-results=27
The CC 40 meets all your criteria except the swim platform. here's how a
friend of mine solved that before he took off for the Caribbean.
Andy
CC 40
Peregrine
On Tue, Aug 19, 2014 at 11:01 AM, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
Hi all,
I'm currently
Okay, that is Beautiful!! I wonder what it would take to get a boat from there
to here?
-- Original Message --
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Subject: Stus-List Upsizing boats
Date: Tue, 19 Aug 2014 11:38:02 -0500
I
/1999/C%26C-110-2733617/Vermilion/OH/United-States#.U_OEuUuRPwI
On Aug 19, 2014, at 1:02 PM, Danny Haughey via CnC-List cnc-list@cnc-list.com
wrote:Okay, that is Beautiful!! I wonder what it would take to get a boat from
there to here?
-- Original Message --
From: Jean-Francois J
Okay so, I'm concentrating on the 34plus and the 37plus. I think either of
these boats could fit the bill. I just need to get on board them and see how
we like them. These are cored hulls, right? This always worries me... should
it?
-- Original Message --
From: Andrew Burton
So, what would be a fair price for a, hasn't been upgraded in over 10 years,
37plus? I'm lining up a couple to look at. DannyLolita1973 Viking 33Westport
Point, MA
-- Original Message --
From: Jean-Francois J Rivard via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Fk*n Wally... That is hysterical!
-- Original Message --
From: Rick Brass via CnC-List cnc-list@cnc-list.com
To: Jack Fitzgerald j...@fitzgeraldforwarding.com, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Sailing Totem - (CC's) Keels Falling Off!
Date: Wed,
Have you tried a good sharp scraper?
-- Original Message --
From: Bev Parslow via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Stus-List varnishing
Date: Wed, 27 Aug 2014 07:46:20 -0700
Ready to start varnishing but how can I get rid of
I have no sound proofing around my engine. I do have the atomic 4 though and
it is referred to as the quiet engine.
In my opinion, and I have no experience with diesel, it's that I want to hear
the engine when it is running even at idle, especially at idle...
From my Android phone
have you tried cleaning with an acetone or a wax remover?
-- Original Message --
From: Kevin Driscoll via CnC-List cnc-list@cnc-list.com
To: RPH rph2m...@yahoo.com, CC List cnc-list@cnc-list.com
Subject: Re: Stus-List Nothing Will Stick!
Date: Mon, 1 Sep 2014 12:40:36 -0700
Fwiw
-list.com
Subject: Re: Stus-List Nothing Will Stick!
I mounted mine on plywood.
Joel
On Monday, September 1, 2014, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
have you tried cleaning with an acetone or a wax remover?
-- Original Message --
From: Kevin Driscoll via CnC
is
one of their favorite spots. I do not think they subscribe to this list, but
they are sociable types so row over and say hi
John and Maryann
Legacy III
1982 CC 34
Noank, CT
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Thursday
Sundowner
76 CC 38MkII
Newport, RI
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Thursday, September 04, 2014 12:39 PM
To: allenmi...@earthlink.net; cnc-list@cnc-list.com; joel.aron...@gmail.com
Subject: Stus-List TAZ
Hi I'm out at cuttyhunk
Ok so, I've just run the engine fir nearly 2 hours to see if I could get it to
cut out. It ran perfectly and now I have fully charged batteries! Lol.
The coil is hot but not too hot to touch. I can touch it for a few seconds but
then it stays to hurt a bit. My guess is about 180 degrees
Hey Wal,I'm just curious. Why did you decide not to go there? Danny
-- Original Message --
From: Joel Aronson via CnC-List cnc-list@cnc-list.com
To: Rich Knowles r...@sailpower.ca, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Odile
Date: Mon, 15 Sep 2014
Hello all, Well it is with mixed emotions that I've put Lolita up for sale.
she is listed on CL and SailboatListings I'd add the link but I don't want to
break any rules. I'm kinda sad about it... I've really grown quite attached to
her. We been through a lot together over the last few years
-list@cnc-list.com
Sent: Wed, Sep 17, 2014 2:35 pm
Subject: Re: Stus-List Viking 33 for sale...
Rules, we have rules? Best of luck! Joel
On Wed, Sep 17, 2014 at 2:16 PM, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
Hello all, Well it is with mixed emotions that I've put Lolita up
Hi Guys,It was really great to meet you guys in Newport on Saturday. I regret
not having brought Lolita but, I had a great time none-the-less! I really
enjoyed seeing the boats and thanks to those that let me board and have a look
around! I say job well done. It's really cool to put faces
The yard where I keep my boat requires the mast to come down for winter storage
on the hard. I feel it gives me the opportunity to have a look at everything
every year. It also makes covering her up a lot easier... DannyLolita1973
Viking 33Westport Point, MA
-- Original Message
Haughey djhaug...@juno.com,cnc-list@cnc-list.com
Subject: RE: Stus-List Mast removal for winter?
Danny
Do you know of an available Viking 33 mast?
Mike
-Original Message-
From: CnC-List on behalf of Danny Haughey via CnC-List
Sent: Mon 22/09/2014 4:48 PM
To: rjcasci...@comcast.net; cnc
:-D. Thanks stu! I wrote Rick of list as well.
From my Android phone
Original message
From: Stu via CnC-List cnc-list@cnc-list.com
Date: 10/09/2014 2:53 PM (GMT-05:00)
To: CC Email List cnc-list@cnc-list.com
Subject: Stus-List Viking 33
As listed on the Photo Album:
Rick,
I just sent to you again. I checked my sent folder and the address is correct.
Maybe I'm in your junk folder...
From my Android phone
Original message
From: Danny Haughey via CnC-List cnc-list@cnc-list.com
Date: 10/09/2014 3:07 PM (GMT-05:00)
To: stumurra
hi David, welcome to the list. most correspondence happens on the email serve.
So, you got that much right! As far as I know, and i don't have rod rigging
and have only seen it, I think the main are of concern are the fittings to the
rods. I believe worst case scenario is the have the
Over the years I've used 4200 5200 and that other stuff...I can't call the
number off from sikaflex. (although the sikaflex was below the water lime on a
thru hull). Last time around I went with the butyl tape from mainsail's site.
I set my new handrails, rebedded the traveler (after
Dave said:
English much?
ha! sometimes your fingers get away from you! LOL
-- Original Message --
From: Dave Godwin via CnC-List cnc-list@cnc-list.com
To: Dave Godwin dave.god...@me.com, cnc-list@cnc-list.com
cnc-list@cnc-list.com
Subject: Re: Stus-List Butyl Tape vs 4200:
Ha! That's awesome!
From my Android phone
Original message
From: Tim Sippel via CnC-List cnc-list@cnc-list.com
Date: 10/15/2014 11:54 AM (GMT-05:00)
To: Joel Aronson joel.aron...@gmail.com,cnc-list@cnc-list.com,Marek Dziedzic
dziedzi...@hotmail.com
Subject: Re:
I'm hoping to go out Saturday. The weather here is looking pretty good so
far... Sunday looks good too only a bit colder. DannyLolita1973 Viking
33Westport Point, MA
-- Original Message --
From: Tim Goodyear via CnC-List cnc-list@cnc-list.com
To: Della Barba, Joe
all well in my neck of the woods!
Danny
-- Original Message --
From: Wally Bryant via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Stus-List Ebola?
Date: Thu, 16 Oct 2014 23:35:37 +
Is everybody up there okay? I hear there's a
looks like 16 to 18 knt winds with 24 knt gust and 7' seas tomorrow up here.
I'm holding off for colder and calmer seas of 4' on Sunday... LOL Coming out
of and getting back into the westport river can be pretty exciting in those
kind of seas! Anyone want some crew in in Narragansett bay??
I just watched that movie a couple of weeks ago.I didn't want to turn it off...
I found myself asking, WTF is he doing now? a lot. found out it was a Cal 39
that he was on. They basically bought and destroyed 3 of them for the movie.
Danny
-- Original Message --
From: Ed
Hey, Would anyone know of a mooring I might be able to use for a couple of
weeks. I'm planning on Having Lolita hauled by Casey's Marina and brought to
my house but he has The 17th of November available. Instead of being locked
into the weekend of the 15th 16th, I was thinking I could
are welcome to grab mine #284. South west corner of main harbor.Let me
know if you need more details..
Petar Horvatic
Sundowner
76 CC 38MkII
Newport, RI
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Monday, October 20, 2014 4:35 PM
Looking to be really nice around here too! 14 to 16 around 60 for a high.
Newport here I come!! DannyLolita1973 Viking 33
-- Original Message --
From: Steve Thomas via CnC-List cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Awesome weekend coming -
when I finished my companionway boards I coated them with West System epoxy and
then 8 coats of Epiphanies Spar Varnish. They are are holding up very well,
but they are never in direct sunlight as the cockpit is covered all summer and
the I have the winter cover on, well, all winter...LOLI
Did you strip right down to bare wood? If so what method did you use for
stripping? Chemical, sanding, scraper?
The video on Jamestown distributor says he scrapes and believes that keeping
the scraper sharp, maybe 4 passes before resharpening, is the best and cleanest
method. Very little
Ok after a very challenging delivery I'm stuck in Newport because I got in
after dark I picked up a random mooring and they want big big money to stay.
I can't find petar's number 284 and I really don't know what to do. Can anyone
offer any advice or help. They want 30 per night out 700 for
Hi guys, what a weekend! I'm all set now. Caseys rented me a mooring for 1/2
what old port wanted. Not as good as free but, what can you do...
The ride over was very exciting and it gave me a whole new level of respect for
the Viking 33. The seas were big, very big at times, the wind had to
Hi Guys,
Anyone have a source for an old easyblock mainsheet traveler car?
Mine broke on the way over on Saturday. I bet there are tons of them out there
from people who've upgraded to more modern systems...
here are some links to pics of it
http://1drv.ms/1wBQYK0
http://1drv.ms/1wBR2K3
Cheers
Rick Taillieu
Nemesis
'75 CC 25 #371
Shearwater Yacht Club
Halifax, NS.
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: October-27-14 14:29
To: cnc-list@cnc-list.com
Subject: Stus-List EasyBlock Mainsheet
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: October-27-14 14:29
To: cnc-list@cnc-list.com
Subject: Stus-List EasyBlock Mainsheet Traveler
Hi Guys,
Anyone have a source for an old easyblock mainsheet traveler car?
Mine broke on the way over on Saturday. I bet
Dwight said;
the brokers don't share that feeling because he often finds too many problems,
There is a good point! Ask the broker which surveyors to stay away from and
use that as your short list!! LOL
Danny
-- Original Message --
From: dwight via CnC-List
probably have
helped him as well.
This arrangement was great for me
Mike
Persistence
1987 Frers 33
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Tuesday, October 28, 2014 11:16 AM
To: dwight...@gmail.com; cnc-list@cnc
-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via CnC-List
Sent: Monday, October 27, 2014 4:40 PM
To: rtaill...@eastlink.ca; cnc-list@cnc-list.com
Cc: cnc-list@cnc-list.com
Subject: Re: Stus-List EasyBlock Mainsheet Traveler
okay that's ridiculous... you're in NS and found
HI Guys, Can anyone shed any light on what is necessary when a coastguard
documented vessel changes hands in Massachusetts? In otherwords both seller
and buyer reside in Massachusetts? What are the sales tax requirements? the
coastguard site does not seem to mention sales tax in the
sales tax is on
the purchase price. USCG has nothing to do with the tax, other than letting MA
know that a transaction happened.
So, Pay till it hurts!
(Or register it in RI like Kerry)
Bill Coleman
CC 39
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny
Haughey via
, there is nothing mysterious
or difficult about any of it.
Bill Bina
On 10/30/2014 11:21 AM, Danny Haughey via CnC-List wrote:HA! I will pass on
the RI comment! LOL Yea I just can't remember how it worked when I bought
Lolita... I'm actually trying to help a woman that wants to buy my boat
it seems my part for selling is easy... WHAT HAPPENS WHEN I SELL MY DOCUMENTED
VESSEL?When the sale is finalized you may complete a U.S. Coast Guard Bill of
Sale (CG-1340) or complete the ldquo;Sale or Transfer of Vesselrdquo; section
on the reverse of the Certificate of Documentation
Burt, you should probably go with 7 stands. That's the recommendation for my
Viking 33.
I searched and searched. I need the number 1 stands for my boat. There are a
few sources fur number 2 stands I found. Best if which was on CL down in
Westport, ma.
Also, mass marine parts in Quincy ma
Only thing I can add is that I would never run tap water through an engine. I
try to always use distilled water antifreeze mix.
From my Android phone
Original message
From: Chuck S via CnC-List cnc-list@cnc-list.com
Date: 11/01/2014 3:35 PM (GMT-05:00)
To: Bernard Toews
Hi Guys, I thought this might be of some interest. I friend of mine sent it to
me yesterday. I have no affiliation with this boat what-so-ever. 79 CC 36 for
$20,500http://boston.craigslist.org/gbs/boa/4705372237.html___
This List is provided by the CC
Hi Guys, Looking for someone to do some recon in Toronto Outer Harbor Marina.Is
there anyone near there that might be of some help? DannyNow
boatless...Massachusetts___
This List is provided by the CC Photo Album
Email address:
CnC-List@cnc-list.com
near outer harbor marina?
What kind of recon? Are you considering buying a boat that's located there?
Steve
Suhana, CC 32
Toronto
On Fri, Nov 7, 2014 at 11:17 AM, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
Hi Guys,
Looking for someone to do some recon in Toronto Outer Harbor
-list.com wrote:
What kind of recon? Are you considering buying a boat that's located there?
Steve
Suhana, CC 32
Toronto
On Fri, Nov 7, 2014 at 11:17 AM, Danny Haughey via CnC-List
cnc-list@cnc-list.com wrote:
Hi Guys,
Looking for someone to do some recon in Toronto Outer Harbor Marina
1 - 100 of 663 matches
Mail list logo
