Re: Stus-List Masthead sheaves for 33-2?

Thanks Sent from my iPhone > On Feb 17, 2018, at 4:35 PM, john sandford wrote: > > Zephyrworks > http://zephyrwerks.com/default.html > I replaced the aluminum main and jib halyard sheaves 2 years ago on my LF38 > As I changed from wire/rope to MLX dyneema I didn’t

Re: Stus-List Masthead sheaves for 33-2?

Zephyrworks http://zephyrwerks.com/default.html I replaced the aluminum main and jib halyard sheaves 2 years ago on my LF38 As I changed from wire/rope to MLX dyneema I didn’t want the wire groove to (maybe) damage the new ones. They shipped new sheaves around in a week, and they fitted

Re: Stus-List Masthead sheaves for 33-2?

I had garhauer do sheaves for our 33-2, slightly narrower than their stock ones. I sent one of the existing ones to them Get Outlook for iOS From: CnC-List on behalf of Dave S via CnC-List

Re: Stus-List Masthead sheaves > Halyard Knots

: Nauset Beach Subject: Re: Stus-List Masthead sheaves > Halyard Knots This is an interesting and very timely thread. I need to replace a genoa halyard and assumed an eye splice would be needed. Had never contemplated a knot on anything larger than a 10’ dinghy. What type of line are people us

Re: Stus-List Masthead sheaves C 37+

@cnc-list.com Cc: Josh Muckley Subject: Re: Stus-List Masthead sheaves C 37+ I didn't spend much time comparing resources and references so take it for what it's worth but the website below did some tests and found the bowline reduced strength by ~60% where as the double fish knot broke at ~75

Re: Stus-List Masthead sheaves > Halyard Knots

] On Behalf Of Josh Muckley via CnC-List Sent: Thursday, February 01, 2018 11:02 PM To: cnc-list@cnc-list.com Cc: Josh Muckley <muckl...@gmail.com> Subject: Re: Stus-List Masthead sheaves C 37+ I didn't spend much time comparing resources and references so take it for what it's

Re: Stus-List Masthead sheaves C 37+

hington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Patrick > Davin via CnC-List > *Sent:* Thursday, February 1, 2018 6:02 PM > *To:* cnc-list@cnc-list.com > *Cc:* Patrick Davin <jda...@gmail.com> > *Subje

Re: Stus-List Masthead sheaves C 37+

PM To: cnc-list@cnc-list.com Cc: Patrick Davin <jda...@gmail.com> Subject: Re: Stus-List Masthead sheaves C 37+ I couldn't help but chuckle that Jeanneau owners are claiming to have invented / named this knot. It's just the halyard hitch with a different finish. So perhaps it

Re: Stus-List Masthead sheaves C 37+

Fair enough Chuck and splices have their place and are quite favorable. I'm a big fan but they also carry their own detriment. Fattening and stiffening the line and wasting 2 or 3 feet of line to freshen the nip to name a few. Josh On Feb 1, 2018 7:58 PM, "Chuck Gilchrest via CnC-List" <

Re: Stus-List Masthead sheaves C 37+

Any knot will reduce strength at roughly 40%. A splice, done correctly, will not. In fact, rope strength is tested with a splice on each end. And it never breaks at the splice. Chuck Gilchrest Novabraid Ropes Sent from my iPhone > On Feb 1, 2018, at 5:28 PM, Josh Muckley via CnC-List

Re: Stus-List Masthead sheaves C 37+

Nice! On Thu, Feb 1, 2018 at 6:52 PM Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > > https://drive.google.com/file/d/1SscMyfIEWikkpcS2VN2j1vhhoeZH9tX1/view?usp=drivesdk > > On Feb 1, 2018 5:28 PM, "Josh Muckley" wrote: > >> I've heard that a bowline can reduce

Re: Stus-List Masthead sheaves C 37+

https://drive.google.com/file/d/1SscMyfIEWikkpcS2VN2j1vhhoeZH9tX1/view?usp=drivesdk On Feb 1, 2018 5:28 PM, "Josh Muckley" wrote: > I've heard that a bowline can reduce strength by 50%. Additionally a > bowline has a fixed diameter loop or eye. It takes a good amount of >

Re: Stus-List Masthead sheaves C 37+

I couldn't help but chuckle that Jeanneau owners are claiming to have invented / named this knot. It's just the halyard hitch with a different finish. So perhaps it should be called halyard hitch, Jeanneau variant? I use the standard halyard hitch which ends with the tail up:

Re: Stus-List Masthead sheaves C 37+

I've heard that a bowline can reduce strength by 50%. Additionally a bowline has a fixed diameter loop or eye. It takes a good amount of dressing the knot to make the eye small. A bigger eye means that the knot "two blocks" or jambs in the sheave sooner. This could be a concern if you are

Re: Stus-List Masthead sheaves C 37+

" If you’re going to go that route, why not just tie a bowline?" Because: 1. This knot is more secure, it will not come undone, even if you want it to. A bowline can shake out under certain circumstances when unloaded. 2. This knot is slightly shorter in length so you get slightly more

Re: Stus-List Masthead sheaves C 37+

Nice knot. If you’re going to go that route, why not just tie a bowline? From: Jim Giffing via CnC-List Sent: Thursday, February 01, 2018 3:29 PM To: cnc-list@cnc-list.com Cc: Jim Giffing Subject: Stus-List Masthead sheaves C 37+ One thing to consider about sheave sizes which I did not think

Re: Stus-List Masthead sheaves C 37+

Yeah Jim that was one of the factors I was considering in my future-proof approach. I thought it would be a stretch to think that I would go up to 5/8ths or really even 1/2 but the core to core eye splice was definitely in the consideration. Like you, I have elected to use a knot. I prefer the

Re: Stus-List Masthead sheaves C 37+

Jim, I starting using it a couple years ago. The only way to undo it is with a knife, but that's a good thing with a halyard! Joel Virus-free. www.avg.com

Re: Stus-List Masthead sheaves C 37+

II “Midnight Mistress”* >> >> *Hampton VA* >> >> [image: cid:image001.png@01D2F43E.567E4070] >> >> >> >> >> >> >> >> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh >> Muckley via CnC-List

Re: Stus-List Masthead sheaves C 37+

Jake >> >> >> >> *Jake Brodersen* >> >> *C 35 Mk-III “Midnight Mistress”* >> >> *Hampton VA* >> >> [image: cid:image001.png@01D2F43E.567E4070] >> >> >> >> >> >> >> >> *From:* CnC-List [mailto:cn

Re: Stus-List Masthead sheaves C 37+

t; > *Hampton VA* > > [image: cid:image001.png@01D2F43E.567E4070] > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh > Muckley via CnC-List > *Sent:* Monday, January 22, 2018 21:42 > *To:* C List <cnc-list@cnc-lis

Re: Stus-List Masthead sheaves C 37+

-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Monday, January 22, 2018 21:42 To: C List <cnc-list@cnc-list.com> Cc: Josh Muckley <muckl...@gmail.com> Subject: Re: Stus-List Masthead sheaves C 37+ Halyard stopper? What's that? Haha, no really what's that? Stopper balls?

Re: Stus-List Masthead sheaves C 37+

Halyard stopper? What's that? Haha, no really what's that? Stopper balls? Or jammers? You're right though 3/8ths is almost too small for my winches. So smaller is pretty unlikely. But bigger might be nice, particularly if it becomes necessary to run the taper of a core to core eye splice.

Re: Stus-List Masthead sheaves C 37+

Josh, 3/8” should be plenty big for your halyards. ½” is certainly overkill. Why not split the difference and go with 7/16”? A slightly larger sheave should create any problems. As strong as halyards are these days, some would argue that 3/8” might be a bit too large. I’m sure your

Re: Stus-List Masthead sheaves C 37+

Josh, My sheaves seemed to be original as I could not find anything from the FO indicating they had ever been replaced. Patriot’s mast was out last winter and my rigger said her sheaves were fine. They did not have a groove for wire rope. I think my halyards are 7/16 with a 1/2”

Re: Stus-List masthead sheaves

zephyrworks, Garhauer, Harken all have alloy sheaves. Joel On Thu, Mar 17, 2016 at 9:49 AM, Jason Ward via CnC-List < cnc-list@cnc-list.com> wrote: > > I am looking for another masthead sheave for my lf38. I have the > wire/rope sheaves and would like to stay with that system. Does anyone >

Re: Stus-List masthead sheaves

Jason My LF38 has wire rope sheaves; 2 Jib and one Main, are identical 4” OD, ½” ID, 9/16” wide, with Oilite bushing. Rope size is 7/16 There is a number 523318 stamped on them, in case that is a help. I googled my brains out with that number, but came up empty. Closest that I have found,

Re: Stus-List masthead sheaves

Jason, Is it a brass sheave about 1 1/2" OD x 3/4" W? I may have one. If so, reply off list. Dennis C. On Thu, Mar 17, 2016 at 8:49 AM, Jason Ward via CnC-List < cnc-list@cnc-list.com> wrote: > > I am looking for another masthead sheave for my lf38. I have the > wire/rope sheaves and would

Re: Stus-List masthead sheaves

Or by some Double Braid with a Spectra or Dyneema core and strip and taper the cover to approximate the length of wire? Chuck Gilchrest Orion LF 35 Padanaram MA Sent from my iPhone > On Mar 18, 2016, at 1:11 PM, Kevin Driscoll via CnC-List > wrote: > > Just a thought,

Re: Stus-List Masthead sheaves replacement

I replaced my main halyard sheave around 5 years ago with UV Stabilized Black UHMW Poly. I had several made up, thinking I would also do my jib sheaves soon. Well, they were bigger! If anyone is interested I would like to sell them, probably 5 bucks each. They are bored to accept a pair of

Re: Stus-List Masthead sheaves replacement

to clean up with emery paper. Jake Jake Brodersen “Midnight Mistress” CC 35 Mk-III Hampton VA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of davidrisch75 via CnC-List Sent: Friday, December 05, 2014 2:35 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List

Re: Stus-List Masthead sheaves replacement

/isomat_sheaves.html The acetyl is rated for handling wire halyards. Michael Brown Windburn CC 30-1 Date: Sat, 6 Dec 2014 09:12:25 -0500 From: Jake Brodersen captain_j...@cox.net To: 'davidrisch75' davidrisc...@msn.com,     cnc-list@cnc-list.com Subject: Re: Stus-List Masthead sheaves replacement Message-ID

Re: Stus-List Masthead sheaves replacement

Burt, I beilieve I need to replace* a jib masthead halyard sheave on my 33-1 since one halyard raises the 135 easily by hand while the other halyard requires a hard grinding via a winch to reach full hoist. My boat is on the hard with the mast stepped. So if you are visiting your boat, I would

Re: Stus-List Masthead sheaves replacement

: Re: Stus-List Masthead sheaves replacement /divdiv /div Burt, I beilieve I need to replace* a jib masthead halyard sheave on my 33-1 since one halyard raises the 135 easily by hand while the other halyard requires a hard grinding via a winch to reach full hoist. My boat is on the hard

Re: Stus-List Masthead sheaves replacement

CnC-List Sent: Friday, December 05, 2014 2:08 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Masthead sheaves replacement Burt, I beilieve I need to replace* a jib masthead halyard sheave on my 33-1 since one halyard raises the 135 easily by hand while the other halyard requires a hard

Re: Stus-List Masthead sheaves replacement

I have a '74 33 3/4 tonner. I believe our rigs are very similar if not identical. I just had my mast un-stepped in order to haul the boat to my property for some winter projects. The mast is stored at my marina. If you like I can take some close up pics for you. I should be heading down to the

Re: Stus-List Masthead sheaves replacement

I've also found McLube to make a huge difference! Burt, you can put a prefeeder on the mast. Joel 35/3 Annapolis ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including

Re: Stus-List Masthead sheaves replacement

[Description: cid:D1BF9853-22F7-47FB-86F2-4115CE0BAF2F] From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of svpegasu...@gmail.com via CnC-List Sent: Wednesday, December 03, 2014 4:00 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Masthead sheaves replacement I installed

Re: Stus-List Masthead sheaves replacement

Doug, I, too, would use the wench to raise my mainsail, but she won't do it! Bill MYSTY Landfall 39 In a message dated 12/3/2014 7:00:51 P.M. Eastern Standard Time, cnc-list@cnc-list.com writes: I installed the Tides track on Pegasus with my new main this year. I use the wench to