Bug#343085: exim4: Exim SMTP_AUTH hangs since today...
Um 22:41 Uhr am 30.01.06 schrieb Florian Weimer: Sven Hartge: So, conclusion: No the problem is not the gnutls-params file, but exim4 using nearly each and every bit of entropy for a _single_ mail. This is expected and is quite hard to fix properly. During your tests, did Exim hang? No, it used /dev/urandom this time (which quite surprised me, since I used the same packages that were installed when Exim hang using /dev/random). It seems I have a little mixup here, so I will restest the situation with verified packages. The problems begin when you're on a high-volume mail server and the delivery process drain entropy so fast that the key generation fails to gather the needed number of bits in a reasonable time period. How long does your server take to refill the pool from zero to 4096? Grüße, Sven. -- Sven Hartge -- professioneller Unix-Geek Meine Gedanken im Netz: http://www.svenhartge.de/ Achtung, neue Mail-Adresse: [EMAIL PROTECTED]
Bug#343085: exim4: Exim SMTP_AUTH hangs since today...
Um 23:04 Uhr am 30.01.06 schrieb Sven Hartge: Um 22:41 Uhr am 30.01.06 schrieb Florian Weimer: Sven Hartge: So, conclusion: No the problem is not the gnutls-params file, but exim4 using nearly each and every bit of entropy for a _single_ mail. This is expected and is quite hard to fix properly. During your tests, did Exim hang? No, it used /dev/urandom this time (which quite surprised me, since I used the same packages that were installed when Exim hang using /dev/random). It seems I have a little mixup here, so I will restest the situation with verified packages. OK, with all those different packages patched and recompiled during the last hours, I got a little knot in my brain. So _of course_ it used /dev/urandom with your fix, as this was the whole point of the patch. (Forgive me for being a little slow sometimes.) Question again: does this patch qualify for an update of the Exim4 packages in Sarge with the next point release? I would even like to see a security update, since without this patch you can remotely block an Debian-Exim mailserver by opening severy SSL connections and thus emptying the entropy pool, causing any further SSL transaction of Exim4 to hang, because the unpatched tls-gnu.c uses /dev/random for its RSA seed. (Is this summary correct?) Grüße, Sven. -- Sven Hartge -- professioneller Unix-Geek Meine Gedanken im Netz: http://www.svenhartge.de/ Achtung, neue Mail-Adresse: [EMAIL PROTECTED]
Bug#344447: Bug #344447: security/pam_client.h: Redefinition of internal libc/libstdc++ types breaks unrelated software
[EMAIL PROTECTED] has been doing most of the pam maintinance lately. I'd rather you run your fix by him. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#349872: krusader: bug confirmed, reported upstream
Hi Jiri, thanks for reporting this bug. I have created a Krusader bugreport to fix it upstream. https://sourceforge.net/tracker/index.php?func=detailaid=1419207group_id=6488atid=106488 [ 1419207 ] strange white stripe in panel Confirmed on Krusader-1.70.0beta2+cvs-29Jan2006 using Debian Sarge. kind regards, Frank Schoolmeesters Krusader Krew http://www.krusader.org
Bug#350597: tasksel: [INTL:sv] Swedish PO translation
tags 350597 pending thanks Quoting Daniel Nylander ([EMAIL PROTECTED]): Package: tasksel Severity: wishlist Tags: patch l10n Here is an update for the Swedish translation of tasksel in D-I LEVEL 2. Commited. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350243: openafs-client: possible to kill afsd during init
Does turning on fakeroot and fakestat help with this? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350637: spampd: The init script should fail with error message if user lacks sufficient privelleges
Package: spampd Severity: wishlist The init script should fail with an error message, visibile to the user if the user lacks sufficent priveleges to start spampd (non-root). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-k7 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350638: liblo: Version 0.23 now available
Package: liblo Severity: normal Verion 0.23 is now available for direct download from: http://www.ecs.soton.ac.uk/~njh/liblo/ And homepage is now: http://liblo.sourceforge.net/ * Added lo_send_from, lo_send_message_from and lo_send_bundle_from * Fixed bug where sockets weren't closed when replying to messages * Split off resolve_address into seperate create_socket function * Only creates new sockets when needed * Fixed pthread resource leak, when stopping thread * IPv6 is now disabled by default -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i586) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-386 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#325600: Status of this bug?
I just upgraded to libc6.1_2.3.5-12 (unstable), and I'm still having defunct MySQL processes. The last email in the bug report seemed to have been from over two months ago. Will Tom Evans' fix ever make it into the repository? Coincidentally, a friend was telling me how most code that hackers try to inline never actually gets inlined by the compiler. Jiann-Ming Su Yeah, Lois, that'll be about as much fun as a lecture on ontological empiricism. --Peter Griffin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#330125: status of toolchain-source?
On 30/01/06, Daniel Widenfalk [EMAIL PROTECTED] wrote: Aníbal Monsalve Salazar wrote: On Wed, Jan 11, 2006 at 10:51:23PM +0100, Daniel Widenfalk wrote:If you are in dire need of cross compilers for thearchitectures that are building, let me know and I can arrange to upload a snapshot of the toolchain-source packages to anftp-server somewhere. It will be better to upload the snapshot of the toolchain-source packages to experimental. I can do it for you. Ok, Give me a couple of days to get the dependency and changelogfixed. I'll also make sure that I can build for sparc. How do youwant to get the files? I can set up a temporary ftp-server, orupload them. Whichever suits you best. Couldn't this be setup as a project on Alioth and uploaded via Alioth's queue?-- Martin-Éric Racinehttp://q-funk.iki.fi
Bug#337951: openvpn restart stops openvpn and doesn't restart it
I've hit this too (status file doesn't exist and so stop_vpn fails which means start is never run). I added || true on the end of the rm. Doing some testing here seems to say that neither rm -f or the [ -e ... ] fix completely fix it. I suspect we maybe racing with openvpn deleting it's status file (after all, we did just kill it :-)) Perhaps waiting for the pid in question might be more elegant? ~$ [ -e /sdfafsdsdffasdfasdsdfafasdfd ] rm /sdfdfssdffasdsdfa ~$ echo $? 1 ~$ [ -e /sdfafsdsdffasdfasdsdfafasdfd ] rm -f /sdfdfssdffasdsdfa ~$ echo $? 1 ~$ [ -e /sdfafsdsdffasdfasdsdfafasdfd ] rm -f /sdfdfssdffasdsdfa || true ~$ echo $? 0 Cheers, Adrian -- Email: [EMAIL PROTECTED] -*- GPG key available on public key servers Debian GNU/Linux - the maintainable distribution -*- www.debian.org Avoid working with children, animals and Microsoft operating systems -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350636: code that reproduces the bug and more info
I was able to reproduce the bug with the following code
(compile: g++ -Wall -O2 x.cpp)
#include stdio.h
#include fstream
typedef unsigned int Uint32;
inline Uint32 read_u32(std::istream in)
{
Uint32 i;
in.read((char*)i, 4);
return i;
}
inline float read_float(std::istream in)
{
Uint32 u = read_u32(in);
return *(float*)(u);
}
int main()
{
std::ifstream in(test);
for (int i = 0; i 2; ++i) {
float x = read_float(in);
float y = read_float(in);
float z = read_float(in);
printf(x=%f y=%f z=%f\n, x, y, z);
}
return 0;
}
with this test file:
(hexdump test)
(2x the float values 1.0, nearly 1.0, and -1)
000 3f80 3f7f bf80 3f80
010 3f7f bf80
the output is:
x=0.00 y=1.00 z=1.00
x=-1.00 y=1.00 z=1.00
which is clearly wrong. the first x should be 1.0
In fact the values for x,y,z are all wrong, because the stored values
are 1,1,-1 in that order, not -1,1,1.
Compiling the code with -O1 gives the correct output.
Seems to have something to do with parameter order on the printf call or
something the like.
Hope this helps...
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350637: spampd: The init script should fail with error message if user lacks sufficient privelleges
also sprach Benjamin Seidenberg [EMAIL PROTECTED] [2006.01.30.2355 +0100]: The init script should fail with an error message, visibile to the user if the user lacks sufficent priveleges to start spampd (non-root). Is this sensible wish honoured by other packages in init.d? $ /etc/init.d/postfix start Starting Postfix Mail Transport Agent: postfixrm: cannot remove `etc/localtime': Permission denied chmod: changing permissions of `etc/localtime': Operation not permitted I am all for it, but before you start mass-filing wishlists, maybe bring this up on the -devel list? -- .''`. martin f. krafft [EMAIL PROTECTED] : :' :proud Debian developer and author: http://debiansystem.info `. `'` `- Debian - when you have better things to do than fixing a system Invalid/expired PGP (sub)keys? Use subkeys.pgp.net as keyserver! bush/cheney '04: the last vote you'll ever have to cast. signature.asc Description: Digital signature (GPG/PGP)
Bug#350399: Azureus finally no longer needs non-free java. It works with gij.
Great news, Philipp! Thanks for the note. As soon as I have some time for Debian, I'll update the package and push Azureus into main. gij-4.1 will have to move out of experimental and into unstable before the same can happen for Azureus though. Cheers, Shaun On 1/29/06, Philipp Klaus Krause [EMAIL PROTECTED] wrote: Package: azureus Version: 2.3.0.6-1 You probably remember bug #322104, where it was first assumed that azureus worked with gij-4.0, but it turned that it didn't really download anything. Since then I occassionally tried azureus with free java packages. I finally succeeded with gij-4.1-0exp7, which just appeared in experimental. I am currently downloading a Debian disk image. Every feature of azureus seems to work (CPU usage is a little bit higher than with blackdown's java though, ~16% on a Pentium M at 800Mhz). So please update the dependencies. Philipp
Bug#350637: spampd: The init script should fail with error message if user lacks sufficient privelleges
martin f krafft wrote: also sprach Benjamin Seidenberg [EMAIL PROTECTED] [2006.01.30.2355 +0100]: The init script should fail with an error message, visibile to the user if the user lacks sufficent priveleges to start spampd (non-root). Is this sensible wish honoured by other packages in init.d? $ /etc/init.d/postfix start Starting Postfix Mail Transport Agent: postfixrm: cannot remove `etc/localtime': Permission denied chmod: changing permissions of `etc/localtime': Operation not permitted I am all for it, but before you start mass-filing wishlists, maybe bring this up on the -devel list? I wasn't massfilling, but filed this at the request of the maintainer, based on a suggestion I made to him. On a lighter note, at least postfix shows something; Permission denied and Operation not permitted at least give you a clue, spampd fails silently, simply saying Starting spampd...done. signature.asc Description: OpenPGP digital signature
Bug#350598: Segfault in samba
On Mon, Jan 30, 2006 at 09:44:47PM +0100, Christian Perrier wrote:
Do you have any mor einformation about what is exactly done on the
server when the crash happens? Does this happens when clients are
doing some action and, if so, which action?
I am not sure. It just started a few days ago, roughly coinciding with
my dist-upgrade and adding an XP box to the network. I don't know if
the crash has to do with either of these.
The crashes just happen without clients doing anything obvious. They
usually come in batches (e.g., a dozen crashes in a short time, and
then it stops for a long while).
Do you have traces in the logs (possible by raising the log leve to 3)?
Can you also please send your smb.conf file?
I'll raise the log level see what happens tomorrow, in the meantime
my smb.conf is below (with workgroup and server addresses removed):
cut here - 8 ---
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# testparm to check that you have not many any basic syntactic
# errors.
#
#=== Global Settings ===
[global]
## Browsing/Identification ###
netbios aliases = sugar
hosts allow = 172.17.1. 127.
username map = /etc/samba/smbusers
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup =
# server string is the equivalent of the NT Description field
# server string = %h server (Samba %v)
server string = Admin office, Debian Sid test machine #1 (Unix)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
wins server = 172.17.1.XX
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
Debugging/Accounting
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
### Authentication ###
# security = user is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
; security = user
security = server
password server = X X
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam guest
obey pam restrictions = yes
; guest account = nobody
invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton [EMAIL PROTECTED] for
# sending the correct chat script for the passwd program in Debian Potato).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
## Printing ##
# If you want to automatically load your printer list rather
# than setting them up individually then you'll
Bug#350639: gnome-volume-manager: Automounting does not work
Package: gnome-volume-manager Version: 1.4.0-4 Severity: important When I insert a CD or an USB key, it does not automount any more, I have to do it manually. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.1 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages gnome-volume-manager depends on: ii gconf2 2.12.1-8 GNOME configuration database syste ii hal0.5.5.1-5 Hardware Abstraction Layer ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.10.3-1 The ATK accessibility toolkit ii libbonobo2-0 2.10.1-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.10.1-2 The Bonobo UI library ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libcairo2 1.0.2-3 The Cairo 2D vector graphics libra ii libdbus-1-20.60-5simple interprocess messaging syst ii libdbus-glib-1-2 0.60-5simple interprocess messaging syst ii libfontconfig1 2.3.2-1.1 generic font configuration library ii libgconf2-42.12.1-8 GNOME configuration database syste ii libgksuui1.0-1 1.0.7-1 a graphical fronted to su library ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.8.6-1 The GLib library of C routines ii libgnome-keyring0 0.4.6-2 GNOME keyring services library ii libgnome2-02.12.0.1-4The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.12.0-2 A powerful object-oriented display ii libgnomeui-0 2.12.0-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.12.2-5 GNOME virtual file-system (runtime ii libgtk2.0-02.8.10-1 The GTK+ graphical user interface ii libhal10.5.5.1-5 Hardware Abstraction Layer - share ii libice66.9.0.dfsg.1-4Inter-Client Exchange library ii liborbit2 1:2.12.4-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.10.2-1 Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 6.9.0.dfsg.1-4X Window System Session Management ii libx11-6 6.9.0.dfsg.1-4X Window System protocol client li ii libxcursor11.1.3-1 X cursor management library ii libxext6 6.9.0.dfsg.1-4X Window System miscellaneous exte ii libxi6 6.9.0.dfsg.1-4X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-4X Window System multi-head display ii libxml22.6.23.dfsg.1-0.1 GNOME XML library ii libxrandr2 6.9.0.dfsg.1-4X Window System Resize, Rotate and ii libxrender11:0.9.0.2-1 X Rendering Extension client libra ii pmount 0.9.7-2 mount removable devices as normal ii zlib1g 1:1.2.3-9 compression library - runtime Versions of packages gnome-volume-manager recommends: ii gnome-media 2.12.0-3 The GNOME Media Utilities ii gthumb3:2.6.6-1 an image viewer and browser ii nautilus-cd-burner2.12.2-3 CD Burning front-end for Nautilus ii totem 1.2.1-3A simple media player for the Gnom -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350640: libboost-doc: html documentation leaves out name of library, difficult to read
Package: libboost-doc Version: 1.33.0-6 Severity: normal For example, /usr/share/doc/libboost-doc/HTML/doc/html/threads/concepts.html contains the phrase: p does not currently provide any mutex objects that use this strategy. For ReadWriteMutexes on which misses the subject of the sentence. In the source code, the file libs/thread/doc/concepts.xml contains the phrase: paraBoost.Threads; does not currently provide any mutex objects that use this strategy. For ReadWriteMutexes on Boost.Threads; does not get substituted. This problems occurs repeatedly in the documentation. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#303913: 0.7 ?
Hi, what is the state of the 0.7 package ? Do you still need a sponsor ? Cheers, --Seb signature.asc Description: Digital signature
Bug#343085: exim4: Exim SMTP_AUTH hangs since today...
Um 23:02 Uhr am 30.01.06 schrieb Florian Weimer: Sven Hartge: Um 15:15 Uhr am 30.01.06 schrieb Florian Weimer: Turns out the patch was broken. This one should be better. The comments above still apply. Sorry, but I patched and recompiled the exim4-package from Sarge, but any encrypted mail transfer nearly empties the entropy pool. Again, this is expected -- I tried to fix the blocking problem, not the entropy consumption as such. The entropy consumption is really a libgcrypt issue; it does not make much sense to work around it in each application individually. Let me sum up all the pieces to see, if I get everything in the right way. a) Exim uses GnuTLS in a way, which causes it to use /dev/random to aquire strictly random bytes on every encrypted connection b) GnuTLS uses much more random bytes to initialize itself than OpenSSL. A combination of A and B leads to a possible hole for a DoS attack, if I am able to drain the entropy pool, because of A, Exim will block until enough entropy is regathered. While fixing A is generally a Good Idea (in my opinion), so Exim does not block if there is no entropy available (because of whatever reason). But the real winner would be a fix to B so that the entropy pool does not get drained so fast and would not only benefit Exim but any other program using GnuTLS. Is this summary correct so far? Grüße, Sven. -- Sven Hartge -- professioneller Unix-Geek Meine Gedanken im Netz: http://www.svenhartge.de/ Achtung, neue Mail-Adresse: [EMAIL PROTECTED]
Bug#350192: tor installation does not create toruser on system
Ok, since I screwed it up I will just forget about it then. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#348426: debian-archive-keyring: priority should match APT priority
Package: debian-archive-keyring Version: 2006.01.18 Followup-For: Bug #348426 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Actually, to avoid getting spurrious warnings and a flood of complains when Etch is released, the priority of the keyring should probably be raised to match the priority of APT, which is Important. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFD3qKmeXr56x4Muc0RAnt8AJ4+/FNTMF2eIzzmzQey1+xFtEbRRQCfcjUd 1B0h1aPOPf67S0XMoZo3oRI= =pK7L -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350637: spampd: The init script should fail with error message if user lacks sufficient privelleges
also sprach Benjamin Seidenberg [EMAIL PROTECTED] [2006.01.31.0022 +0100]: I wasn't massfilling, but filed this at the request of the maintainer, based on a suggestion I made to him. ok. On a lighter note, at least postfix shows something; Permission denied and Operation not permitted at least give you a clue, spampd fails silently, simply saying Starting spampd...done. yeah, that's no good. I agree. step by step... -- .''`. martin f. krafft [EMAIL PROTECTED] : :' :proud Debian developer and author: http://debiansystem.info `. `'` `- Debian - when you have better things to do than fixing a system Invalid/expired PGP (sub)keys? Use subkeys.pgp.net as keyserver! micro$oft windoze - the best solitaire game you can buy. signature.asc Description: Digital signature (GPG/PGP)
Bug#350641: connecting to sleeping process incorrectly shows it calling setup()
Package: strace
Version: 4.5.12-1
Severity: normal
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
nanosleep({60, 0}, unfinished ...
Process 24849 detached
[EMAIL PROTECTED]:~sudo strace -p 24849
Process 24849 attached - interrupt to quit
setup(
Of course no regular user process can really call setup(), which probably
doesn't exist anymore anyway. Seems strace gets confused when attaching to
a sleeping process.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages strace depends on:
ii libc6 2.3.5-11 GNU C Library: Shared libraries an
strace recommends no packages.
-- no debconf information
--
see shy jo
signature.asc
Description: Digital signature
Bug#350643: Please move to libreadline5-dev
Package: ekg Version: 1:1.6+20051103-1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350644: Please move to libreadline5-dev
Package: gdb-avr Version: 6.3-2 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350645: Please move to libreadline5-dev
Package: gdb-m68hc1x Version: 1:6.2+3.0.1-1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350646: Please move to libreadline5-dev
Package: libmal Version: 0.40-3 Severity: wishlist libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline-dev | libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350642: Please move to libreadline5-dev
Package: mysql-dfsg Version: 4.0.24-10sarge1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350647: Please move to libreadline5-dev
Package: liboop Version: 1.0-3 Severity: important libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev | libreadline-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350593: quodlibet: clicking on table cells doesn't work when content doesn't fit
On Mon, 2006-01-30 at 19:16 +0100, Thomas Viehmann wrote: Joe Wreschnig wrote: What window manager are you using? The tooltip window should pass clicks through to the window below. Metacity. Forcingly switching to sawfish (killall metacity sawfish) doesn't seem to give a lot of improvement. It certainly only looks like a click lets the tooltips dissapear for a split second and I can try to click wildly to use that time to click on the real thing... Weird -- does QL print anything on a terminal when you click on one of the tooltips? -- Joe Wreschnig [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Bug#350648: Please move to libreadline5-dev
Package: systemimager Version: 3.4.1-1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350649: Please move to libreadline5-dev
Package: tftp-hpa Version: 0.40-4.1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. P. S. Double chocolate. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350650: Please move to libreadline5-dev
Package: timps Version: 0.20-1 Severity: important libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev | libreadline-dev. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350651: gnome-control-center: gnome-about-me requires work e-mail
Package: gnome-control-center Version: 1:2.12.2-2 Severity: normal Hi! If you do the following: 1) Fill in your home e-mail 2) Leave the work e-mail blank 3) Close gnome-about-me 4) Open it again It will put your swap your home and work e-mails! If you do the same steps but filling the work e-mail with something (a space will do it) this bug disappears. I don't know if the problem is on the storage of the info or on showing it again. Sincerely, Felipe. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (900, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-ck2 Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to pt_BR.UTF-8) Versions of packages gnome-control-center depends on: ii capplets-data 1:2.12.2-2configuration applets for GNOME 2 ii desktop-file-utils 0.10-1Utilities for .desktop files ii gnome-desktop-data 2.12.2-2 Common files for GNOME 2 desktop a ii gnome-icon-theme 2.12.1-2 GNOME Desktop icon theme ii gnome-menus2.12.0-2.1an implementation of the freedeskt ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.10.3-1 The ATK accessibility toolkit ii libaudiofile0 0.2.6-6 Open-source version of SGI's audio ii libavahi-client3 0.6.4-2 Avahi client library ii libavahi-common3 0.6.4-2 Avahi common library ii libavahi-compat-howl0 0.6.4-2 Avahi Howl compatibility library ii libbonobo2-0 2.10.1-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.10.1-2 The Bonobo UI library ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libcairo2 1.0.2-3 The Cairo 2D vector graphics libra ii libdbus-1-20.60-5simple interprocess messaging syst ii libebook1.2-5 1.4.2.1-1 Client library for evolution addre ii libesd-alsa0 [libesd0] 0.2.36-3 Enlightened Sound Daemon (ALSA) - ii libfontconfig1 2.3.2-1.1 generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgamin0 [libfam0]0.1.7-3 Client library for the gamin file ii libgconf2-42.12.1-8 GNOME configuration database syste ii libgcrypt111.2.2-1 LGPL Crypto library - runtime libr ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.8.6-1 The GLib library of C routines ii libgnome-desktop-2 2.12.2-2 Utility library for loading .deskt ii libgnome-keyring0 0.4.6-2 GNOME keyring services library ii libgnome-menu2 2.12.0-2.1an implementation of the freedeskt ii libgnome2-02.12.0.1-4The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.12.0-2 A powerful object-oriented display ii libgnomeui-0 2.12.0-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.12.2-5 GNOME virtual file-system (runtime ii libgnutls111.0.16-14 GNU TLS library - runtime library ii libgpg-error0 1.1-4 library for common error values an ii libgstreamer-plugins0. 0.8.11-6 Various GStreamer libraries and li ii libgstreamer0.8-0 0.8.11-3 Core GStreamer libraries, plugins, ii libgtk2.0-02.8.10-1 The GTK+ graphical user interface ii libice66.9.0.dfsg.1-4Inter-Client Exchange library ii libjpeg62 6b-11 The Independent JPEG Group's JPEG ii libmetacity0 1:2.12.2-3Common library of lightweight GTK2 ii libnautilus-extension1 2.12.2-2 libraries for nautilus components ii liborbit2 1:2.12.4-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.10.2-1 Layout and rendering of internatio ii libpng12-0 1.2.8rel-5PNG library - runtime ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 6.9.0.dfsg.1-4X Window System Session Management ii libstartup-notificatio 0.8-1 library for program launch feedbac ii libtasn1-2 0.2.17-1 Manage ASN.1 structures (runtime) ii libx11-6 6.9.0.dfsg.1-4X Window System protocol client li ii libxcursor11.1.3-1 X cursor management library ii libxext6 6.9.0.dfsg.1-4X Window System miscellaneous exte ii libxft22.1.8.2-2 FreeType-based font drawing librar ii libxi6 6.9.0.dfsg.1-4X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-4
Bug#350652: install-report
Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso Date: 31/31/2006 Machine: Motherboard: ASUS K8N4-E Deluxe; Chipset: NVIDIA nForce 4-4X CPU: AMD Athlon 64 3400; Storage: NVIDIA nForce 4-4X chipset support; HardDisk SATA 200GB Memory 1GB; LAN: Marvell 88E8 Gigabit LAN PHY Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[E] Configure network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Installed system ok:[ ] Comments/Problems: (sorry for my english): I've changed my old motherbord with this one. My old Debian installation work good with a 2.6.12 kernel, but is impossible for me to compile a new kernel (system doesn't boot) or do a new install with netinst cd becouse the debian-installer doesn't detect the hard drivers -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- --- LINUX: Live Free Or Die. http://www.debian.org http://www.kde.org FrustaPunk --- Package: installation-reports Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso Date: 31/31/2006 Machine: Motherboard: ASUS K8N4-E Deluxe; Chipset: NVIDIA nForce 4-4X CPU: AMD Athlon 64 3400; Storage: NVIDIA nForce 4-4X chipset support; HardDisk SATA 200GB Memory 1GB; LAN: Marvell 88E8 Gigabit LAN PHY Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[E] Configure network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Installed system ok:[ ] Comments/Problems: (sorry for my english): I've changed my old motherbord with this one. My old Debian installation work good with a 2.6.12 kernel, but is impossible for me to compile a new kernel (system don't boot) or do a new install with netinst cd becouse the debian-installer doesn't detect the hard drivers -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED]
Bug#350653: Please add armeb
Package: lintian Version: 1.23.14 Severity: wishlist Please add the armeb architecture to %non_standard_archs. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages lintian depends on: ii binutils 2.16.1cvs20060117-1 The GNU assembler, linker and bina ii diffstat 1.41-1 produces graph of changes introduc ii dpkg-dev 1.13.11 package building tools for Debian ii file 4.15-2 Determines file type using magic ii gettext 0.14.5-2GNU Internationalization utilities ii intltool-debian 0.34.1+20050828 Help i18n of RFC822 compliant conf ii libparse-debianchang 1.0-1 parse Debian changelogs and output ii man-db 2.4.3-3 The on-line manual pager ii perl [libdigest-md5- 5.8.7-10Larry Wall's Practical Extraction lintian recommends no packages. -- no debconf information -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350654: libghttp1: libghttp waits for data after headers even if it sent a HEAD request
Package: libghttp1 Version: 1.0.9-17 Severity: normal When you use libghttp to send a HEAD request with Connection: keep-alive It waits for a request body until the server times out the keep-alive connection. Header requests don't return a request body [1]. [1] http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html#sec9.4 -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.1-nvidia Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages libghttp1 depends on: ii libc6 2.3.5-12 GNU C Library: Shared libraries an libghttp1 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#320924: gcalctool: addition/subtraction of percents %
Gcalctool 5.6.31 in testing supports this from of expression. Luck Mick Timony -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#335016: Bug reports for texinfo (and 2 wishes)
All I can offer is http://cvs.savannah.nongnu.org/viewcvs/*checkout*/texi2latex/xslt/texinfo.dtd?rev=1.4root=texi2latex It all looks sensible to me, so I installed your version wholesale. The actual --xml output hasn't changed since 4.8, I don't think. I updated http://www.gnu.org/software/texinfo/dtd/4.8/texinfo.dtd, too. Hope this solves the original report. Thanks, Karl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350655: libghttp1: libghttp waits for a message body when sending a HEAD request
Package: libghttp1 Version: 1.0.9-17 Severity: normal *** Please type your report below this line *** When you use libghttp to send a HEAD request with Connection: keep-alive It waits for a request body until the server times out the keep-alive connection. Header requests don't return a request body [1]. [1] http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html#sec9.4 -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.1-nvidia Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages libghttp1 depends on: ii libc6 2.3.5-12 GNU C Library: Shared libraries an libghttp1 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350656: mathpartir.sty license notice references whizzytex
Package: mathpartir Version: 1.1.1-2 From mathpartir.sty: % Mathpartir --- Math Paragraph for Typesetting Inference Rules % % Copyright (C) 2001, 2002, 2003 Didier RE9my % % Author : Didier Remy % Version: 1.1.1 % Bug Reports: to author % Web Site : http://pauillac.inria.fr/~remy/latex/ % % WhizzyTeX is free software; you can redistribute it and/or modify % it under the terms of the GNU General Public License as published by % the Free Software Foundation; either version 2, or (at your option) % any later version. % % Mathpartir is distributed in the hope that it will be useful, % but WITHOUT ANY WARRANTY; without even the implied warranty of % MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the % GNU General Public License for more details % (http://pauillac.inria.fr/~remy/license/GPL). This seems wrong; probably a copy-paste error. - Josh Triplett signature.asc Description: OpenPGP digital signature
Bug#350642: Please move to libreadline5-dev
Hello Martin On 2006-01-31 Martin Michlmayr wrote: Package: mysql-dfsg Version: 4.0.24-10sarge1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. MySQL 4.0 and 4.1 will be removed from testing/unstable as soon as all packages have rebuild against libmysqlclient15 (see OngoingTransitions on wiki.debian.net) If you really urgently want me to do an upload with libreadline5-dev for some reason, please let me know. bye, -christian- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#337136: evince: another all-black: http://www.lemis.com/grog/Documentation/vj/lca06vj.pdf
Package: evince Version: 0.4.0-1 Followup-For: Bug #337136 displays fine with xpdf from sid. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages evince depends on: ii gconf2 2.12.1-8 GNOME configuration database syste ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.10.3-1 The ATK accessibility toolkit ii libaudiofile0 0.2.6-6 Open-source version of SGI's audio ii libbonobo2-0 2.10.1-1 Bonobo CORBA interfaces library ii libbonoboui2-0 2.10.1-2 The Bonobo UI library ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libcairo2 1.0.2-3 The Cairo 2D vector graphics libra ii libdjvulibre15 3.5.16-2 Runtime support for the DjVu image ii libesd-alsa0 [libesd0] 0.2.36-3 Enlightened Sound Daemon (ALSA) - ii libfontconfig1 2.3.2-1.1 generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgconf2-42.12.1-8 GNOME configuration database syste ii libgcrypt111.2.2-1 LGPL Crypto library - runtime libr ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.8.6-1 The GLib library of C routines ii libgnome-keyring0 0.4.6-2 GNOME keyring services library ii libgnome2-02.12.0.1-4The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.12.0-2 A powerful object-oriented display ii libgnomeprint2.2-0 2.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.12.0-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.12.2-5 GNOME virtual file-system (runtime ii libgnutls111.0.16-14 GNU TLS library - runtime library ii libgpg-error0 1.1-4 library for common error values an ii libgtk2.0-02.8.10-1 The GTK+ graphical user interface ii libice66.9.0.dfsg.1-4Inter-Client Exchange library ii libjpeg62 6b-11 The Independent JPEG Group's JPEG ii libkpathsea3 2.1-1 path search library for teTeX (run ii libnautilus-extension1 2.12.2-2 libraries for nautilus components ii liborbit2 1:2.12.4-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.10.2-1 Layout and rendering of internatio ii libpng12-0 1.2.8rel-5PNG library - runtime ii libpoppler0c2 0.4.4-2 PDF rendering library ii libpoppler0c2-glib 0.4.4-2 PDF rendering library (GLib-based ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 6.9.0.dfsg.1-4X Window System Session Management ii libstdc++6 4.0.2-8 The GNU Standard C++ Library v3 ii libtasn1-2 0.2.17-1 Manage ASN.1 structures (runtime) ii libtiff4 3.8.0-1 Tag Image File Format (TIFF) libra ii libx11-6 6.9.0.dfsg.1-4X Window System protocol client li ii libxml22.6.23.dfsg.1-0.1 GNOME XML library ii libxrender11:0.9.0.2-1 X Rendering Extension client libra ii xlibs 6.9.0.dfsg.1-4X Window System client libraries m ii zlib1g 1:1.2.3-9 compression library - runtime evince recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350657: r-base: download.packages() assumes /usr/local/lib/R is writeable
Package: r-base Version: 2.2.1-2 Severity: normal This bug can be considered to be (1) incorrect handling of a user error, or (2) incorrect documentation, or (3) missing Debian documentation. (Depending on one's mood, I suppose.) Running download.packages(vcd) leads to (a) a warning that it is going to attempt to write to /usr/local/lib/R, which is not a directory to which Debian users normally have write permission. Then, errors from lack of permission. (b) Note that according to the R documentation, lib is a required argument without a default, so an error should be reported even be before a download is attempted. (c) The resulting error message could be more helpful; it could suggest a change to the lib argument or perhaps other things. So, if the intent is to have a default argument for lib, it should be specified in help(install.packages); if not, it should return an error. If the intent is to install into /usr/local/lib/R on Linux boxes, then the Debian package ought to note somewhere (probably in /usr/share/doc/r-base/README.Debian) that users need to be in group staff to be able to install R packages to the default directories. install.packages(vcd) Warning in install.packages(vcd) : argument 'lib' is missing: using /usr/local/lib/R/site-library --- Please select a CRAN mirror for use in this session --- Loading Tcl/Tk interface ... done trying URL 'http://cran.uk.r-project.org/src/contrib/vcd_0.9-7.tar.gz' Content type 'application/x-gzip' length 771160 bytes opened URL == downloaded 753Kb mkdir: cannot create directory `/usr/local/lib/R/site-library/00LOCK': Permission denied ERROR: failed to lock directory '/usr/local/lib/R/site-library' for modifying The downloaded packages are in /tmp/RtmpCVx2nl/downloaded_packages Warning messages: 1: installation of package 'vcd' had non-zero exit status in: install.packages(vcd) 2: cannot create HTML package index in: tools:::unix.packages.html(.Library) -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) Versions of packages r-base depends on: ii r-base-core 2.2.1-2GNU R core of statistical computin ii r-recommended 2.2.1-2GNU R collection of recommended pa Versions of packages r-base recommends: pn r-base-html none (no description available) pn r-base-latex none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#336789: mdadm and multilevel raid
Mdadm does not appear to respect multilevel software raid setups. It will assemble only one level of the raid. I just wanted to mail to let you know there is more than one person attempting to use the functionality. Thanks, wt -- Warren Turkal, Research Associate III Colorado State University, Dept. of Atmospheric Science -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350524: This is not the bug in dx this is the problem with dxhdf5.
Package: dx Version: 1:4.4.0-1 Followup-For: Bug #350524 Sorry for confusion. I just find out that porblem not in dx package but in dxhdf5 http://www-beams.colorado.edu/dxhdf5/ There are not dxhdf5 packaged yet in Debian. I compiled this module against libhdf5-serial-1.6.2-0 It was working fine till dx=4.3.2-6 and stop working with dx=4.3.2-7. It do not work with dx=4.4.0-1 also. It look like dx is not linked against libhdf5-serial-1.6.2-0 anymore. Unfortunately it fail to compile against libhdf5-serial-1.6.4-0c2. g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include -I/usr/lib/dx/include -g -O2 -MT DhH5FieldFile.lo -MD -MP -MF .deps/DhH5FieldFile.Tpo -c DhH5FieldFile.cpp -fPIC -DPIC -o .libs/DhH5FieldFile.o DhH5FieldFile.cpp: In member function 'void DhH5FieldFile::read(void*, H5::DataType)': DhH5FieldFile.cpp:205: error: invalid conversion from 'long long int*' to 'const hsize_t*' DhH5FieldFile.cpp:205: error: initializing argument 3 of 'void H5::DataSpace::selectHyperslab(H5S_seloper_t, const hsize_t*, const hsize_t*, const hsize_t*, const hsize_t*) const' Compilation of dxhdf5 fail only on Debian system. Probably bug in libhdf5-serial-1.6.4-0c2. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages dx depends on: ii lesstif2 1:0.94.4-1.1 OSF/Motif 2.1 implementation relea ii libbz2-1.0 1.0.3-2 high-quality block-sorting file co ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdx4 1:4.4.0-1 OpenDX (IBM Visualization Data Exp ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgcc11:4.1-0exp7 GCC support library ii libglu1-xorg [libglu1] 6.9.0.dfsg.1-4Mesa OpenGL utility library [X.Org ii libhdf4g 4.1r4-18.1The Hierarchical Data Format libra ii libice66.9.0.dfsg.1-4Inter-Client Exchange library ii libjasper-1.701-1 1.701.0-2 The JasPer JPEG-2000 runtime libra ii libjpeg62 6b-11 The Independent JPEG Group's JPEG ii liblcms1 1.13-1Color management library ii libmagick9 6:6.2.4.5-0.6 Image manipulation library ii libpng12-0 1.2.8rel-5PNG library - runtime ii libsm6 6.9.0.dfsg.1-4X Window System Session Management ii libstdc++6 4.1-0exp7 The GNU Standard C++ Library v3 ii libtiff4 3.8.0-1 Tag Image File Format (TIFF) libra ii libx11-6 6.9.0.dfsg.1-4X Window System protocol client li ii libxext6 6.9.0.dfsg.1-4X Window System miscellaneous exte ii libxft22.1.8.2-2 FreeType-based font drawing librar ii libxml22.6.23.dfsg.1-0.1 GNOME XML library ii libxmu66.9.0.dfsg.1-4X Window System miscellaneous util ii libxp6 6.9.0.dfsg.1-4X Window System printing extension ii libxpm46.9.0.dfsg.1-4X pixmap library ii libxrender11:0.9.0.2-1 X Rendering Extension client libra ii libxt6 6.9.0.dfsg.1-4X Toolkit Intrinsics ii netcdfg3 3.5.0-7.1 An interface for scientific data a ii xlibmesa-gl [libgl1] 6.9.0.dfsg.1-4Mesa 3D graphics library [X.Org] ii zlib1g 1:1.2.3-9 compression library - runtime Versions of packages dx recommends: ii dx-doc1:4.4.0-1 OpenDX (IBM Visualization Data Exp -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350648: Please move to libreadline5-dev
tags 350648 + fixed-in-experimental stop On Tue, 2006-01-31 at 00:30 +, Martin Michlmayr wrote: Package: systemimager Version: 3.4.1-1 Severity: serious libreadline4-dev has been removed from the archive (see #339320), please change your build-depends to libreadline5-dev. Thanks Martin. The 3.4 series has serious problems building in unstable (mostly gcc 4 issues) so its unlikely I'll do another upload of it. However, 3.6 is in experimental, and does build-dep on libreadline5-dev. Once I have some positive testing responses from users, I'll move this into sid. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350655: libghttp1: libghttp waits for a message body when sending a HEAD request
merge 350654 350655 thanks We already got this report :) On Mon, Jan 30, 2006 at 11:06:26PM -0200, Marcelo Bezerra wrote: Package: libghttp1 Version: 1.0.9-17 Severity: normal *** Please type your report below this line *** When you use libghttp to send a HEAD request with Connection: keep-alive It waits for a request body until the server times out the keep-alive connection. Header requests don't return a request body [1]. [1] http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html#sec9.4 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350658: r-base: Incorrect group permission for /usr/lib/R/library
Package: r-base Version: 2.2.1-2 Severity: normal At the end of installation of a package, R gives an warning message as follows, and the HTML documentation is not installed. download.packages(vcd) ... The downloaded packages are in /tmp/RtmpE7F4ef/downloaded_packages Warning message: cannot create HTML package index in: tools:::unix.packages.html(.Library) This (rather obscure) error message apparently means that a write to /usr/lib/R/library failed. Indeed it does, since the directory is owned by root:root . Probably, it should be owned by root:staff . -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) Versions of packages r-base depends on: ii r-base-core 2.2.1-2GNU R core of statistical computin ii r-recommended 2.2.1-2GNU R collection of recommended pa Versions of packages r-base recommends: pn r-base-html none (no description available) pn r-base-latex none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350660: synaptic: non-root mode
Package: synaptic Version: 0.57.7.1 Severity: wishlist It would be great to have a non-root mode for synaptic, to allow browsing of the package lists by non-superusers. The CLI alternative to synaptic, aptitude(8), allows this. Installing/removing would of course be disabled. As a bonus, it could even allow actions (such as upgrades etc) to be queued and then saved to a file, which could subsequently be loaded when the program is run as root. The saved actions file could be a generic shell script that just runs dpkg(1). The advantage of this scheme is that users get a pretty GUI to browse the package lists and make selections. They do not need to be worried about breaking their system through inadvertent interactions or a bug in synaptic, because it does not run as root. Administrators can then review the selections (via their favourite text editor) and update the system from a comfortable environment with trusted tools (ie a CLI and dpkg). Just a thought. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345888: debian/rules patch to install gtkmozembed.so in libgtk-mozembed-ruby1.8
On 15:37 Sat 28 Jan 2006, Mario Izquierdo (mariodebian) wrote: gtkmozembed.so is installed in libgtk-trayicon-ruby1.8 not libgtk-mozembed-ruby1.8, and in an unssual dir. Yes, my stupid mistake. Generated Makefile with ruby1.8 extconf.rb --enable-fullwidth-reverse-solidus dont' have correct paths. Possible patch: --- debian/rules2006-01-28 15:10:10.0 +0100 +++ ../../rules 2006-01-28 15:32:06.0 +0100 @@ -26,10 +26,14 @@ dh_clean -k dh_installdirs - $(MAKE) DESTDIR=$(CURDIR)/debian/libgtk-trayicon-ruby1.8/usr/lib/ruby install + $(MAKE) DESTDIR=$(CURDIR)/debian/libgtk-mozembed-ruby1.8 install # $(MAKE) sitedir=$(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby install touch install-stamp - + mkdir -p $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby/1.8/i486-linux + mv $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/local/lib/site_ruby/1.8/i486-linux/gtkmozembed.so $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby/1.8/i486-linux + mv $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/local/lib/site_ruby/1.8/gtkmozembed.rb $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby/1.8/ + rm -rf $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/local That wouldn't work on architectures different than i486-linux, as on my workstation, PPC. Therefore, I've change your patch a bit: install-stamp: build-stamp dh_testdir dh_testroot dh_clean -k dh_installdirs $(MAKE) DESTDIR=$(CURDIR)/debian/libgtk-mozembed-ruby1.8 install mkdir -p $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby/ mv $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/local/lib/site_ruby/1.8 \ $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/lib/ruby/ rm -rf $(CURDIR)/debian/libgtk-mozembed-ruby1.8/usr/local touch install-stamp And now this works for everybody. I have uploaded the corrected package, thanks. -- David Moreno Garza [EMAIL PROTECTED] | http://www.damog.net/ [EMAIL PROTECTED] | GPG: C671257D The number of RC bugs in Debian is... -Steve Langasek. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350659: fuse: New upstream version 2.5.1
Package: fuse Severity: wishlist Fuse version 2.5.1 has been releases. What is new in 2.5 - Merge library part of FreeBSD port - New atomic create+open, access and ftruncate operations - On filesystems implementing the new create+open operation, and running on Linux kernels 2.6.15 or later, the 'cp' operation will work correctly when copying read-only files. - New option parsing interface added to the library - Lots of minor improvements and fixes See: http://prdownloads.sourceforge.net/fuse/fuse-2.5.1.tar.gz?download -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.1-nvidia Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350586: [EMAIL PROTECTED]: Bug#350586: heartbeat: LinuxSCSI fails because of wrong /proc/scsi/scsi Usage]
Hi Linux-HA-dev,
Is this fix appropriate? I'm not up on what changes might have
been made to /proc/scsi
- Forwarded message from Christoph Martin [EMAIL PROTECTED] -
Subject: Bug#350586: heartbeat: LinuxSCSI fails because of wrong
/proc/scsi/scsi Usage
Reply-To: Christoph Martin [EMAIL PROTECTED], [EMAIL PROTECTED]
Message-Id: [EMAIL PROTECTED]
From: Christoph Martin [EMAIL PROTECTED]
To: Debian Bug Tracking System [EMAIL PROTECTED]
Date: Fri, 27 Jan 2006 14:36:42 +0100
X-Spam-Status: No, score=-1.9 required=5.0 tests=AWL,BAYES_00,
DATE_IN_FUTURE_06_12 autolearn=no
version=3.0.4-stephanie.vergenet.net_2005122100
Package: heartbeat
Version: 1.2.3-9sarge3
Severity: normal
Tags: patch
Please use the patch below to fix the LinuxSCSI resource script:
*** /etc/ha.d/resource.d/LinuxSCSI~ 2005-08-13 09:46:25.0 +0200
--- /etc/ha.d/resource.d/LinuxSCSI 2006-01-27 14:25:30.464771922 +0100
***
*** 142,148
scsi_start() {
parseinst $1
[ $target = error ] exit 1
! echo scsi-add-single-device $host $channel $target $lun $PROCSCSI
if
scsi_status $1
then
--- 142,148
scsi_start() {
parseinst $1
[ $target = error ] exit 1
! echo scsi add-single-device $host $channel $target $lun $PROCSCSI
if
scsi_status $1
then
***
*** 160,166
scsi_stop() {
parseinst $1
[ $target = error ] exit 1
! echo scsi-remove-single-device $host $channel $target $lun $PROCSCSI
if
scsi_status $1
then
--- 160,166
scsi_stop() {
parseinst $1
[ $target = error ] exit 1
! echo scsi remove-single-device $host $channel $target $lun $PROCSCSI
if
scsi_status $1
then
-- System Information:
Debian Release: 3.1
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.8-11-amd64-k8-smp
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages heartbeat depends on:
ii adduser3.63 Add and remove users and groups
ii iproute20041019-3Professional tools to control the
ii iputils-ping 3:20020927-2 Tools to test the reachability of
ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an
ii libglib1.2 1.2.10-9 The GLib library of C routines
ii libnet11.1.2.1-2 library for the construction and h
ii libpils0 1.2.3-9sarge3 Plugin and Interface Loading Syste
ii libstonith01.2.3-9sarge3 Interface for remotely powering do
ii python 2.3.5-2 An interactive high-level object-o
-- no debconf information
- End forwarded message -
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350661: vlock leaks info about password (PIN) length when using libpam-opensc
Package: vlock Version: 1.3-8 Severity: normal I'm not entirely clear whether this bug should be a vlock bug or a libpam-opensc bug. Since i only see the behavior directly in vlock, however (neither xscreensaver nor login leak this information), this makes me think it's a vlock problem and not a libpam-opensc problem. when i use vlock with libpam-opensc, if the passphrase given is a different length than the user's actual passphrase, vlock actually reports that information in the error messages. i'm running a patched version of vlock right now (see bug #318507), but even if i run a vanilla 1.3-8 vlock (from an unpacked deb), i get the same error messages printed to the console. Here's a transcript of such an interaction (using vlock 1.3-8): [EMAIL PROTECTED] ~]$ src/vlock/clean-deb/root/usr/bin/vlock This TTY is now locked. Use Alt-function keys to switch to other virtual consoles. Please enter the password to unlock. dkg's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: sc_pkcs15_verify_pin: Invalid PIN length root's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: No such user, .eid dir unreadable, nonexistent or unsafe. *** That password is incorrect; please try again. *** This TTY is now locked. Use Alt-function keys to switch to other virtual consoles. Please enter the password to unlock. dkg's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: [EMAIL PROTECTED] ~]$ src/vlock/clean-deb/root/usr/bin/vlock This TTY is now locked. Use Alt-function keys to switch to other virtual consoles. Please enter the password to unlock. dkg's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: sec.c:204:sc_pin_cmd: returning with: PIN code or key incorrect sc_pkcs15_verify_pin: PIN code or key incorrect root's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: No such user, .eid dir unreadable, nonexistent or unsafe. *** That password is incorrect; please try again. *** This TTY is now locked. Use Alt-function keys to switch to other virtual consoles. Please enter the password to unlock. dkg's Using card reader Schlumberger E-Gate Enter PIN1 [dkg]: [EMAIL PROTECTED] ~]$ (ignore the failures for authenticating against root: root deliberately can't authenticate with libpam-opensc on this system, so i just pressed enter there, and didn't bother supplying a passphrase). For the first failure i deliberately chose a passphrase of different length than the actual PIN on the card. That yields the following error: sc_pkcs15_verify_pin: Invalid PIN length i then authenticated correctly, and locked again. For the second vlock auth failure, i deliberately chose a wrong passphrase that has the same character count as the actual PIN on the card. This results instead with two lines of printed error: sec.c:204:sc_pin_cmd: returning with: PIN code or key incorrect sc_pkcs15_verify_pin: PIN code or key incorrect so what i'm seeing here is that vlock is leaking information about the length of the passphrase when this PAM module is in use. Please let me know if i can provide any more information about my system, run any tests, etc. Thanks for looking into this, --dkg additional info about my system: [EMAIL PROTECTED] tmp]$ cat /etc/pam.d/vlock #%PAM-1.0 @include common-auth #auth requiredpam_unix.so #auth required pam_nologin.so [EMAIL PROTECTED] tmp]$ cat /etc/pam.d/common-auth # # /etc/pam.d/common-auth - authentication settings common to all services # # This file is included from other service-specific PAM config files, # and should contain a list of the authentication modules that define # the central authentication scheme for use on the system # (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the # traditional Unix authentication mechanisms. # # auth requiredpam_unix.so nullok_secure auth required pam_opensc.so [EMAIL PROTECTED] tmp]$ dpkg -l libpam-opensc Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name VersionDescription +++-==-==- ii libpam-opensc 0.9.6-3Pluggable Authentication Module for using PK [EMAIL PROTECTED] tmp]$ -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (700, 'testing'), (700, 'stable'), (600, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages vlock depends on: ii libc6 2.3.5-8GNU C Library: Shared libraries an ii libpam0g 0.79-3 Pluggable Authentication Modules l vlock recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL
Bug#350662: zope3: unmet dependencies
Package: zope3 Version: 3.2.0-1 Severity: serious Justification: Policy 2.2.1 The following packages have unmet dependencies: zope3: Depends: python2.4-mechanize (= 0.0.10a) but it is not installable E: Broken packages -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350663: wacom-kernel-source: Incompatible with 2.6.14
Package: wacom-kernel-source Version: 0.6.6-8 Severity: normal This package doesn't work with 2.6.14 (the compiled module won't load complaining of conflicting checksums on symbols). It should probably be upgraded to 0.7.2. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.1 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages wacom-kernel-source depends on: ii build-essential 11.1 informational list of build-essent ii debconf [debconf-2.0] 1.4.57 Debian configuration management sy ii debhelper 4.9.5 helper programs for debian/rules ii libx11-dev6.8.2.dfsg.1-5 X Window System protocol client li wacom-kernel-source recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350664: xterm: Escape sequence does not always change cursor colour
Package: xterm Version: 208-3.1 Severity: minor The escape sequence for changing the cursor colour does not work when you are trying to change the cursor colour to the same colour as the foreground text. eg. $ xterm -fg green -bg black xterm$ echo -ne \E]12;red\007 xterm$ echo -ne \E]12;green\007 xterm$ echo -ne \E]12;blue\007 xterm$ echo -ne \E]12;green\007 The lines that should set the cursor to green do nothing. The problem appears to be in charproc.c in set_cursor_gcs() where it checks to see if the cursor colour is different from the foreground and background colour. If so, it operates as though the cursor colour has changed. Yet in this above case, the cursor colour has changed _to_ the foreground colour. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.13.4-imladris-1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages xterm depends on: ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libfontconfig12.3.2-1.1 generic font configuration library ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libice6 6.9.0.dfsg.1-4 Inter-Client Exchange library ii libncurses5 5.5-1 Shared libraries for terminal hand ii libsm66.9.0.dfsg.1-4 X Window System Session Management ii libx11-6 6.9.0.dfsg.1-4 X Window System protocol client li ii libxaw8 6.9.0.dfsg.1-4 X Athena widget set library ii libxext6 6.9.0.dfsg.1-4 X Window System miscellaneous exte ii libxft2 2.1.8.2-2 FreeType-based font drawing librar ii libxmu6 6.9.0.dfsg.1-4 X Window System miscellaneous util ii libxrender1 1:0.9.0.2-1X Rendering Extension client libra ii libxt66.9.0.dfsg.1-4 X Toolkit Intrinsics ii xlibs-data6.9.0.dfsg.1-4 X Window System client data ii zlib1g1:1.2.3-9 compression library - runtime Versions of packages xterm recommends: ii xutils6.9.0.dfsg.1-4 X Window System utility programs -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350665: kernel-package: check for -j in MAKEFLAGS is not quite correct
Package: kernel-package Version: 10.033 Severity: normal make-kpkg has checks to make sure that MAKEFLAGS and MFLAGS do not contain -j. They are not quite correct. I have MAKEFLAGS set to kj3. This accords with the documentation in the make info page, which e.g. gives the example if you do `make -ks', then `MAKEFLAGS' gets the value `ks'. However, with this setting of MAKEFLAGS, 'make-kpkg kernel_image' gives a segfault(!) and the actual cause is extremely hard to discern. (I had to read through make-kpkg's source.) The manual also has a paragraph describing the exact rules make uses for parsing MAKEFLAGS, which begins When `make' interprets the value of `MAKEFLAGS'; I don't have copy/paste capability right now so I'll let you find it yourself with that clue... Contrariwise, the manual also mentions that GNU make does not respect the MFLAGS variable -- it sets it for compatibility, but if you set it yourself it will ignore you. So make-kpkg's check for MFLAGS is probably pointless. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.11frances2 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages kernel-package depends on: ii dpkg 1.13.11.1 package maintenance system for Deb ii dpkg-dev 1.13.11.1 package building tools for Debian ii file 4.15-2 Determines file type using magic ii gcc [c-compiler] 4:4.0.2-2 The GNU C compiler ii gcc-2.95 [c-compiler] 1:2.95.4-24The GNU C compiler ii gcc-3.2 [c-compiler] 1:3.2.3-9 The GNU C compiler ii gcc-3.3 [c-compiler] 1:3.3.6-12 The GNU C compiler ii gcc-3.4 [c-compiler] 3.4.5-2The GNU C compiler ii gcc-4.0 [c-compiler] 4.0.2-7The GNU C compiler ii gettext 0.14.5-2 GNU Internationalization utilities ii make 3.80+3.81.b4-1 The GNU version of the make util ii perl 5.8.7-10 Larry Wall's Practical Extraction ii po-debconf0.9.2 manage translated Debconf template Versions of packages kernel-package recommends: ii bzip2 1.0.3-2high-quality block-sorting file co ii libc6-dev [libc-dev] 2.3.5-12 GNU C Library: Development Librari -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#347957: libpam-p11: it works for me...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Subject: libpam-p11: it works for me... Followup-For: Bug #347957 Package: libpam-p11 Version: 0.1.2-2 i just did a bit of testing (moved a workstation to pam-p11 today, from pam-opensc), and i can't duplicate this error. Are you sure that your card hasn't been blocked by too many failed PIN attempts? i've locked myself out of a cryptoFlex eGate smartcard before by deliberately giving it the wrong password many times in a row (usually while testing PAM behavior in various clients). When a card gets locked like this, i see exactly the message the Rene reports: sec.c:204:sc_pin_cmd: returning with: Authentication method blocked if you had set a PUK (PIN Unblocking Key) on that auth-id, you should be able to remove the Authentication Block with pkcs15-tool --unblock-pin -a 1 (replace '1' with whichever auth-id you were using). Otherwise, from what i can tell, you'll probably need to reset the card. - From what i've read, multiple failures (10+?) of the PUK may permanently disable the card, though, so be careful. Here's me logging into my workstation with libpam-p11-opensc: - -- Debian GNU/Linux testing/unstable squeak tty1 squeak login: dkg Password for token OpenSC Card (dkg): Last login: Mon Jan 30 21:51:12 2006 on tty1 Linux squeak 2.6.12-1-686 #1 Tue Sep 27 12:52:50 JST 2005 i686 GNU/Linux The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. No mail. [EMAIL PROTECTED] ~]$ - -- and /etc/pam.d/common-auth just has the following line: auth required pam_p11_opensc.so /usr/lib/pkcs11/opensc-pkcs11.so note that a couple posts [0] on the opensc-user mailing list talk about possible reasons that an Authentication Block like this might happen... Hope this helps move along the diagnosis here. it'd be nice to see this package move into testing, if this bug is actually not due to the software, but just to Rene's card itself. Regards, --dkg [0] http://www.opensc-project.org/pipermail/opensc-user/2005-July/000249.html http://www.opensc-project.org/pipermail/opensc-user/2005-July/000250.html - -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (700, 'testing'), (700, 'stable'), (600, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages libpam-p11 depends on: ii libc6 2.3.5-8GNU C Library: Shared libraries an ii libp11-0 0.2.1-2pkcs#11 convenience library ii libpam0g 0.79-3 Pluggable Authentication Modules l ii libssl0.9.8 0.9.8a-6 SSL shared libraries libpam-p11 recommends no packages. - -- no debconf information -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.8+ http://mailcrypt.sourceforge.net/ iD8DBQFD3t44iXTlFKVLY2URAuh/AKC6YdSCrCBYjxBERq6V2QVe/MPCzgCgzmOJ 291czXBV2fysNDA+Rgva4bg= =yd4f -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#347412: Tried with just skge
Ok, I just tried with having only the 'skge' module loaded since boot. Once again, ethernet died. So, the summary is: 2.6.12, w/ sk98lin: Works 2.6.12 does not have skge. 2.6.15 w/ sk98lin skge (yes, you can load both[0]): Fails 2.6.15 w/ sk98lin: Fails 2.6.15 w/ skge: Fails where fails means either the ethernet card stops working (silently, with no errors) or SATA fails (all I/O gives I/O errors --- quite a bit not silent, and loses data). [0] And at least the combination of udev and discover was doing so until I stopped it. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350666: quodlibet: fails to start 'segmentation fault'
Package: quodlibet Version: 0.16-2 Severity: grave Justification: renders package unusable When I start quodlibet from the terminal I get the following response... [EMAIL PROTECTED]:~$ quodlibet Segmentation fault -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-1-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages quodlibet depends on: ii gstreamer0.8-alsa [g 0.8.11-2ALSA plugin for GStreamer ii gstreamer0.8-artsd [ 0.8.11-2aRtsd plugin for GStreamer ii gstreamer0.8-esd [gs 0.8.11-2Enlightened Sound Daemon plugin fo ii gstreamer0.8-mad 0.8.11-2MAD MPEG audio decoder plugin for ii gstreamer0.8-oss [gs 0.8.11-2OSS plugin for GStreamer ii gstreamer0.8-polypau 0.8.11-2polypaudio plugin for GStreamer ii gstreamer0.8-vorbis 0.8.11-2Vorbis plugin for GStreamer ii libgtk2.0-0 2.8.10-1The GTK+ graphical user interface ii python 2.3.5-5 An interactive high-level object-o ii python-ctypes0.9.6+cvs20051031-1 Python package to create and manip ii python-gst 0.8.3-1 generic media-playing framework (P ii python-gtk2 2.6.3-2 Python bindings for the GTK+ widge ii python-pymad 0.5.4-1 Python wrapper to the MPEG Audio D ii python-pyvorbis 1.3-1 A Python interface to the Ogg Vorb ii python2.3-pymad [pyt 0.5.4-1 Python wrapper to the MPEG Audio D Versions of packages quodlibet recommends: ii gstreamer0.8-flac 0.8.11-2 FLAC plugin for GStreamer ii gstreamer0.8-mikmod 0.8.11-2 MikMod decoder plugin for GStreame ii gstreamer0.8-musepack 0.8.11-2 Musepack (MPC) audio decoder plugi ii libgstreamer-gconf0.8-0 0.8.11-2 GConf support for GStreamer pn python-feedparser none (no description available) pn python-flac none (no description available) pn python-gnome2-extras none (no description available) pn quodlibet-ext none (no description available) pn quodlibet-plugins none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350663: wacom-kernel-source: Incompatible with 2.6.14
Hi, On Mon, Jan 30, 2006 at 08:54:05PM -0600, John Goerzen wrote: This package doesn't work with 2.6.14 (the compiled module won't load complaining of conflicting checksums on symbols). Hmm, actually I'm surprised it even compiles. There were missing symbols trying to build with 2.4.13... It should probably be upgraded to 0.7.2. It's not that simple. The problem(s) I'm aware of, mostly relate to the device rebinding code, used by this package (and the cpad one), which is not from the upstream distribution -- but which is required to distribute it as a standalone module. We've talked about pushing it upstream, but as you can see, after a couple of years things are back in flux again. To use the current pristine upstream source, you'll probably need to (patch and) rebuild your kernel core instead of just adding an extra module. Supporting this better is a work in progress on lk afaik, things certainly seem to be changing -- and there are newer versions of the wacom driver integrated with the Linus kernel too. I'm not sure if they are now sufficient by themselves for many people. Upstream still requires some ugly patches to unrelated kernel parts to avoid the device being bound by the wrong drivers... At this stage, someone either needs to do some legwork and throw me a bone about what sort of changes we should make to do things the '2.6.14' way -- or you'll need to be patient until things settle down again and I can find the time to do just that. There are other options if this is really urgent for somebody. Anyone with time to help, or some other case to push this up my todo list, is welcome to get in touch. best, Ron -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350668: cupsys: /etc/init.d/cupsys (stop|restart) works only when cupsd is running as root
Package: cupsys Version: 1.1.23-12 Severity: normal When cupsd is running as unprivileged user like 'cupsys' by using 'RunAsUser' directive on cupsd.conf, /etc/init.d/cupsys (stop|restart) does not work. It's because of start-stop-daemon's '--user root' option. Just removing this option, the problem could be fixed. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (500, 'stable'), (90, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.12-1-686 Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8) Versions of packages cupsys depends on: ii adduser 3.80Add and remove users and groups ii debconf [debconf-2.0]1.4.67 Debian configuration management sy ii gs-esp 8.15.1.dfsg.1-1 The Ghostscript PostScript interpr ii libc62.3.5-8 GNU C Library: Shared libraries an ii libcupsimage21.1.23-12 Common UNIX Printing System(tm) - ii libcupsys2 1.1.23-12 Common UNIX Printing System(tm) - ii libgnutls12 1.2.9-2 the GNU TLS library - runtime libr ii libpam0g 0.79-3 Pluggable Authentication Modules l ii libpaper11.1.14-5Library for handling paper charact ii libslp1 1.2.1-5 OpenSLP libraries ii patch2.5.9-2 Apply a diff file to an original ii perl-modules 5.8.7-10Core Perl modules ii procps 1:3.2.5-1 /proc file system utilities ii xpdf-utils 3.01-5 Portable Document Format (PDF) sui ii zlib1g 1:1.2.3-9 compression library - runtime Versions of packages cupsys recommends: ii cupsys-client 1.1.23-12 Common UNIX Printing System(tm) - pn foomatic-filters none (no description available) pn smbclient none (no description available) -- debconf information: * cupsys/raw-print: true * cupsys/backend: ipp, usb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350667: audiopause scriptlet
Package: hibernate Version: 1.12-1 Severity: wishlist Tags: patch It can be useful to pause audio players before hibernation for several reasons: * Machine might resume in a different, audio-sensative environemt (ie, airplane) * Some players like quodlibet (at least when using alsa) release the audio device when paused, which allows it to be unloaded if it's a problimatic device. This is a lot nicer than letting hibernate kill the audio player. * Avoid ugly audio artifacts if music is playing during suspend/resume. I've written a scriptlet to accomplish this. It's designed to be extended to work with any audio players that might be running, although currently it only implements pausing quodlibet. It's enabled as follows: ### audiopause AudioPause yes I've attached the scriptlet and I would be happy to see it added to the hibernate package. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) hibernate depends on no packages. Versions of packages hibernate recommends: ii console-tools 1:0.2.3dbs-60 Linux console and font utilities ii hdparm 6.3-3 tune hard disk parameters for high pn vlock none(no description available) -- no debconf information -- see shy jo signature.asc Description: Digital signature
Bug#350669: libpng12-dev: wrong type for tyepdefs
Package: libpng12-dev Version: 1.2.8rel-1 Severity: wishlist Hi, /usr/include/pngconf.h defines among others: typedef unsigned long png_uint_32; Please consider using C99 by replacing those defines with #include stdint.h typedef uint32_t png_uint_32; or at least use an int for 32bit values as that is 32bit across basically all archs in use while long is 32bit or 64bit. MfG Goswin PS: this is wishlist as the comment says at least XX bits long but it also mentions using int on 64bit platforms. -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.8-frosties-2 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages libpng12-dev depends on: ii libpng12-0 1.2.8rel-1PNG library - runtime ii zlib1g-dev 1:1.2.2-4.sarge.2 compression library - development -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350670: xpid detection depends on hardcoded, incomplete list of wms
Package: hibernate
Version: 1.12-1
Severity: normal
Tags: patch
The xpid code in the hibernate script looks for one of a long list of
window managers to figure out what user is running X. This failed for
me, since my window manager, ion3, is not included in the list (neither
are ion2 or ion, or probably several others). I think that the last
program in the list, X, matched, but of course the X process itself is
running as root so it gets the wrong user and things don't work.
I think there are probably better ways to do this when xdm is used. For
example, here I have:
[EMAIL PROTECTED]:~last :0 | grep 'still logged in'
joey :0Mon Jan 30 22:21 still logged in
I've attached a patch to use that.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
hibernate depends on no packages.
Versions of packages hibernate recommends:
ii console-tools 1:0.2.3dbs-60 Linux console and font utilities
ii hdparm 6.3-3 tune hard disk parameters for high
pn vlock none(no description available)
-- no debconf information
--
see shy jo
--- /tmp/hibernate 2006-01-31 00:13:29.0 -0500
+++ /usr/sbin/hibernate 2006-01-31 00:20:14.0 -0500
@@ -206,20 +206,36 @@
# Find a useful XAUTHORITY and ideally a username too if we can!
local xuser xauth xpid
-for xpid in `pidof kwrapper ksmserver kdeinit gnome-session fvwm fvwm2 pwm
blackbox fluxbox X XFree86 Xorg` ; do
- # Ensure the process still exists, and we aren't hallucinating.
- [ -d /proc/$xpid/ ] || continue
-
- xauth=`awk 'BEGIN{RS=\\000;FS==}($1 == XAUTHORITY){print $2}'
/proc/$xpid/environ`
- xhome=`awk 'BEGIN{RS=\\000;FS==}($1 == HOME){print $2}'
/proc/$xpid/environ`
- xuser=`/bin/ls -ld /proc/$xpid/ | awk '{print $3}'`
- [ -z $xauth ] [ -n $xhome ] [ -f $xhome/.Xauthority ]
xauth=$xhome/.Xauthority
-
- XAUTHORITY=$xauth su $xuser -c $xhost /dev/null 21 break
-
- xauth=
- xuser=
+for display in $(seq 0 8); do
+ xuser=$(last :$display | grep 'still logged in') || true
+ if [ -n $xuser ]; then
+ xhome=$(getent passwd $xuser | cut -d: -f 6)
+ if [ -n $xhome ]; then
+ xauth=$xhome/.Xauthority
+ fi
+ fi
+ if [ -z $xhome ] || [ -z $xauth ]; then
+ xauth=
+ xuser=
+ xhome=
+ fi
done
+if [ -z $xuser ] ; then
+for xpid in `pidof kwrapper ksmserver kdeinit gnome-session fvwm fvwm2
pwm blackbox fluxbox X XFree86 Xorg` ; do
+ # Ensure the process still exists, and we aren't hallucinating.
+ [ -d /proc/$xpid/ ] || continue
+
+ xauth=`awk 'BEGIN{RS=\\000;FS==}($1 == XAUTHORITY){print $2}'
/proc/$xpid/environ`
+ xhome=`awk 'BEGIN{RS=\\000;FS==}($1 == HOME){print $2}'
/proc/$xpid/environ`
+ xuser=`/bin/ls -ld /proc/$xpid/ | awk '{print $3}'`
+ [ -z $xauth ] [ -n $xhome ] [ -f $xhome/.Xauthority ]
xauth=$xhome/.Xauthority
+
+ XAUTHORITY=$xauth su $xuser -c $xhost /dev/null 21 break
+
+ xauth=
+ xuser=
+ done
+fi
if [ -n $xuser ] ; then
XUSER=$xuser
if [ -n $xauth ] ; then
signature.asc
Description: Digital signature
Bug#350671: 'man libnetlink' typo: writen
Package: iproute Version: 20051007-3 Severity: minor Tags: patch Found a typo in '/usr/share/man/man3/libnetlink.3.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages iproute depends on: ii libatm1 2.4.1-17 shared library for ATM (Asynchrono ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdb4.2 4.2.52-23 Berkeley v4.2 Database Libraries [ iproute recommends no packages. -- no debconf information --- libnetlink.32005-01-17 18:27:37.0 -0500 +++ /tmp/libnetlink.3 2006-01-30 13:27:33.0 -0500 @@ -187,7 +187,7 @@ This library should be named librtnetlink. .SH AUTHORS -netlink/rtnetlink was designed and writen by Alexey Kuznetsov. +netlink/rtnetlink was designed and written by Alexey Kuznetsov. Andi Kleen wrote the man page. .SH SEE ALSO
Bug#350672: 'man ip' typo: Neigh bour
Package: iproute Version: 20051007-3 Severity: minor Tags: patch Found a typo in '/usr/share/man/man8/ip.8.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages iproute depends on: ii libatm1 2.4.1-17 shared library for ATM (Asynchrono ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdb4.2 4.2.52-23 Berkeley v4.2 Database Libraries [ iproute recommends no packages. -- no debconf information --- ip.82006-01-28 17:38:08.0 -0500 +++ /tmp/ip.8 2006-01-30 13:31:14.0 -0500 @@ -740,7 +740,7 @@ .BI nud NUD_STATE the state of the neighbour entry. .B nud -is an abbreviation for 'Neigh bour Unreachability Detection'. +is an abbreviation for 'Neighbour Unreachability Detection'. The state can take one of the following values: .in +8
Bug#350673: 'man tc-cbq-details' typo: occured
Package: iproute Version: 20051007-3 Severity: minor Tags: patch Found a typo in '/usr/share/man/man8/tc-cbq-details.8.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages iproute depends on: ii libatm1 2.4.1-17 shared library for ATM (Asynchrono ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdb4.2 4.2.52-23 Berkeley v4.2 Database Libraries [ iproute recommends no packages. -- no debconf information --- tc-cbq-details.82004-06-08 16:34:17.0 -0400 +++ /tmp/tc-cbq-details.8 2006-01-30 13:33:06.0 -0500 @@ -197,7 +197,7 @@ The fallback algorithm resides outside of the loop and is as follows. .TP (i) -Consult the defmap of the class at which the jump to fallback occured. If +Consult the defmap of the class at which the jump to fallback occurred. If the defmap contains a class for the .B priority
Bug#350674: 'man tc-htb' typo: mininum
Package: iproute Version: 20051007-3 Severity: minor Tags: patch Found a typo in '/usr/share/man/man8/tc-htb.8.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages iproute depends on: ii libatm1 2.4.1-17 shared library for ATM (Asynchrono ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdb4.2 4.2.52-23 Berkeley v4.2 Database Libraries [ iproute recommends no packages. -- no debconf information --- tc-htb.82004-06-08 16:34:17.0 -0400 +++ /tmp/tc-htb.8 2006-01-30 13:35:01.0 -0500 @@ -137,7 +137,7 @@ .SH NOTES Due to Unix timing constraints, the maximum ceil rate is not infinite and may in fact be quite low. On Intel, there are 100 timer events per second, the maximum rate is that rate at which 'burst' bytes are sent each timer tick. -From this, the mininum burst size for a specified rate can be calculated. For i386, a 10mbit rate requires a 12 kilobyte +From this, the minimum burst size for a specified rate can be calculated. For i386, a 10mbit rate requires a 12 kilobyte burst as 100*12kb*8 equals 10mbit. .SH SEE ALSO
Bug#350675: 'man tc-prio' typos: Montetary, Decimcal, and commandline x 2
Package: iproute Version: 20051007-3 Severity: minor Tags: patch Found some typos in '/usr/share/man/man8/tc-prio.8.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages iproute depends on: ii libatm1 2.4.1-17 shared library for ATM (Asynchrono ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libdb4.2 4.2.52-23 Berkeley v4.2 Database Libraries [ iproute recommends no packages. -- no debconf information --- tc-prio.8 2004-06-08 16:34:17.0 -0400 +++ /tmp/tc-prio.8 2006-01-30 13:37:08.0 -0500 @@ -30,7 +30,7 @@ On creation with 'tc qdisc add', a fixed number of bands is created. Each band is a class, although is not possible to add classes with 'tc qdisc add', the number of bands to be created must instead be specified on the -commandline attaching PRIO to its root. +command line attaching PRIO to its root. When dequeueing, band 0 is tried first and only if it did not deliver a packet does PRIO try band 1, and so onwards. Maximum reliability packets @@ -88,7 +88,7 @@ The four TOS bits (the 'TOS field') are defined as: .nf -Binary Decimcal Meaning +Binary Decimal Meaning - 1000 8 Minimize delay (md) 0100 4 Maximize throughput (mt) @@ -125,13 +125,13 @@ The second column contains the value of the relevant four TOS bits, followed by their translated meaning. For example, 15 stands -for a packet wanting Minimal Montetary Cost, Maximum Reliability, Maximum +for a packet wanting Minimal Monetary Cost, Maximum Reliability, Maximum Throughput AND Minimum Delay. The fourth column lists the way the Linux kernel interprets the TOS bits, by showing to which Priority they are mapped. -The last column shows the result of the default priomap. On the commandline, +The last column shows the result of the default priomap. On the command line, the default priomap looks like this: 1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
Bug#350507: resolved
fixed in gnome-menus 2.12.0-2.1 signature.asc Description: This is a digitally signed message part
Bug#350676: add a way to disable xmessage while still having xosd display
Package: hibernate Version: 1.12-1 Severity: wishlist Tags: patch I find the xmessage windows annoying, they get in the way of whatever I'm doing. The osd display, OTOH, is nice. To get one without the other I implemented the attached patch. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) hibernate depends on no packages. Versions of packages hibernate recommends: ii console-tools 1:0.2.3dbs-60 Linux console and font utilities ii hdparm 6.3-3 tune hard disk parameters for high pn vlock none(no description available) -- no debconf information -- see shy jo --- usr/share/hibernate/scriptlets.d/xstatus2005-10-02 01:54:28.0 -0400 +++ /usr/share/hibernate/scriptlets.d/xstatus 2006-01-31 00:41:24.0 -0500 @@ -10,6 +10,7 @@ AddConfigHelp XSuspendText message Text to display on screen whilst preparing to suspend. (default: \$XSTATUS_SUSPEND_TEXT\) AddConfigHelp XResumeText message Text to display on screen whilst coming back from suspend. (default: \$XSTATUS_RESUME_TEXT\) AddConfigHelp XosdSettings options Options to pass to osd_cat, see 'man osd_cat' (default: \$XOSD_SETTINGS\) +AddConfigHelp XmessageDisable boolean Disable display of xmessage dialogs ### KDE bits: @@ -126,11 +127,13 @@ kill -TERM $xmessage_pid exit 0 } -trap xmessage_exit_handler HUP QUIT INT TERM -su $XUSER -c xmessage -buttons 'Cancel:44' -default 'Cancel' -center -title Hibernate \$1\ /dev/null /dev/null 21 -xmessage_pid=$! -wait $xmessage_pid -[ $? -eq 44 ] kill -INT $pid_to_kill /dev/null 21 +if [ -z $XMESSAGE_DISABLE ]; then +trap xmessage_exit_handler HUP QUIT INT TERM +su $XUSER -c xmessage -buttons 'Cancel:44' -default 'Cancel' -center -title Hibernate \$1\ /dev/null /dev/null 21 +xmessage_pid=$! +wait $xmessage_pid +[ $? -eq 44 ] kill -INT $pid_to_kill /dev/null 21 +fi exit 0 } @@ -244,6 +247,12 @@ shift XOSD_SETTINGS=$* ;; + xmessagedisable) + shift + if [ $1 = true ]; then + XMESSAGE_DISABLE=1 + fi + ;; *) return 1 esac signature.asc Description: Digital signature
Bug#350667: file..
Of course I forgot the attachment, here it is.
--
see shy jo
# -*- sh -*-
# vim:ft=sh:ts=8:sw=4:noet
AddConfigHandler AudioPauseOptions
AddConfigHelp AudioPause boolean This will pause audio playing before
hibernation. Audio playing is not resumed afterwards, you can do it manually.
AudioPauseSuspend() {
for qluser in $(ps aux | grep '[q]uodlibet' | awk '{print $1}' | sort |
uniq); do
homedir=$(getent passwd $qluser | cut -d: -f 6)
if [ -e $homedir/.quodlibet/control ]; then
vecho 1 Pausing $qluser quodlibet..
echo pause $homedir/.quodlibet/control
fi
done
return 0
}
AudioPauseOptions() {
case $1 in
audiopause)
if [ -z $AUDIOPAUSE_HOOKED ] ; then
# Run before device scriptlet kills programs accessing
# some devices. Pausing can prevent an audio player
# from using a device and getting killed.
AddSuspendHook 15 AudioPauseSuspend
AUDIOPAUSE_HOOKED=1
fi
;;
*)
return 1
esac
return 0
}
# $Id: $
signature.asc
Description: Digital signature
Bug#350677: apr-util_1.2.2-3(ia64/unstable): FTBFS: non-PIC in shared lib
Package: apr-util Version: 1.2.2-3 Severity: serious There was an error while trying to autobuild your package: Automatic build of apr-util_1.2.2-3 on caballero by sbuild/ia64 85 Build started at 20060131-0405 [...] ** Using build dependencies supplied by package: Build-Depends: debhelper ( 5.0.0), autoconf, autotools-dev, libtool, mawk, libldap2-dev, libexpat1-dev, libdb4.3-dev, libpcre3-dev, dpatch (= 1.11), binutils (= 2.14.90.0.7), libapr1-dev (= 1.2.2-1), libsqlite3-dev, libpq-dev, libgdbm-dev, python [...] /usr/bin/libtool --silent --mode=link cc -pipe -Wall -g -O2 -pthread -pipe -Wall -g -O2 -DHAVE_CONFIG_H -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -I/build/buildd/apr-util-1.2.2/include -I/build/buildd/apr-util-1.2.2/include/private -I/usr/include/apr-1.0 -I/usr/include/postgresql -version-info 2:2:2-o libaprutil-1.la -rpath /usr/lib buckets/apr_buckets_pipe.lo buckets/apr_buckets_flush.lo buckets/apr_buckets_alloc.lo buckets/apr_buckets_pool.lo buckets/apr_buckets_socket.lo buckets/apr_buckets_heap.lo buckets/apr_buckets_simple.lo buckets/apr_buckets_file.lo buckets/apr_buckets.lo buckets/apr_buckets_mmap.lo buckets/apr_buckets_eos.lo buckets/apr_brigade.lo buckets/apr_buckets_refcount.lo crypto/apr_sha1.lo crypto/uuid.lo crypto/getuuid.lo crypto/apr_md5.lo crypto/apr_md4.lo dbm/apr_dbm.lo dbm/apr_dbm_berkeleydb.lo dbm/apr_dbm_gdbm.lo dbm/apr_dbm_ndbm.lo dbm/apr_dbm_sdbm.lo dbm/sdbm/sdbm_pair.lo dbm/sdbm/sdbm.lo dbm/sdbm/sdbm_hash.lo dbm/sdbm/sdbm_lock.lo encoding/apr_base64.lo hooks/apr_hooks.lo ldap/apr_ldap_url.lo ldap/apr_ldap_option.lo ldap/apr_ldap_init.lo misc/apr_reslist.lo misc/apu_version.lo misc/apr_date.lo misc/apr_rmm.lo misc/apr_queue.lo uri/apr_uri.lo xml/apr_xml.lo strmatch/apr_strmatch.lo xlate/xlate.lo dbd/apr_dbd.lo dbd/apr_dbd_sqlite2.lo dbd/apr_dbd_sqlite3.lo dbd/apr_dbd_pgsql.lo -luuid -lrt -lcrypt -lpthread -ldl -lldap -llber -lgdbm -ldb-4.3 -lpq -lsqlite3 /usr/lib/libexpat.la /usr/lib/libapr-1.la -luuid -lrt -lcrypt -lpthread -ldl /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_global_pool /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_global_pool /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_debug_enabled /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_global_pool /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_debug_current /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_debug_enabled /usr/bin/ld: hooks/.libs/apr_hooks.o: @gprel relocation against dynamic symbol apr_hook_global_pool /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: ld returned 1 exit status make[2]: *** [libaprutil-1.la] Error 1 make[2]: Leaving directory `/build/buildd/apr-util-1.2.2' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/build/buildd/apr-util-1.2.2' make: *** [build-stamp] Error 2 A full build log can be found at: http://buildd.debian.org/build.php?arch=ia64pkg=apr-utilver=1.2.2-3 Shared libraries must be built using only -fPIC code. lamont
Bug#350652: install-report
(sorry for my english): I've changed my old motherbord with this one. My old Debian installation work good with a 2.6.12 kernel, but is impossible for me to compile a new kernel (system doesn't boot) or do a new install with netinst cd becouse the debian-installer doesn't detect the hard drivers Please provide us with the output of: (lspci ; lspci -n) | sort you can run this in 2nd console when running the installer. Please paste the part relevant to your HD controller. If you know which kernel module supports this controller, please mention it to us...booting a Knoppix Live CD could help for knowing this (assumign your HD is supported in Knoppix). Also confirm that your HD is not detected *in the installer* and not later, when the installed system is rebooted.
Bug#350678: ksayit: Crashes with terminate called after throwing an instance of 'QString' error.
Package: ksayit Version: 4:3.5.1-1 Severity: important Running 'ksayit' displays: % ksayit ; echo $? terminate called after throwing an instance of 'QString' KCrash: Application 'ksayit' crashing... 253 Attached is a backtrace. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages ksayit depends on: ii artsbuilder 4:3.5.1-1 synthesizer designer for aRts ii kdelibs4c2a 4:3.5.1-1 core libraries for all KDE applica ii libarts1c2a 1.5.1-1aRts sound system core components ii libc6 2.3.5-12 GNU C Library: Shared libraries an ii libgcc1 1:4.0.2-7 GCC support library ii libqt3-mt 3:3.3.5-3 Qt GUI Library (Threaded runtime v ii libstdc++64.0.2-7The GNU Standard C++ Library v3 ksayit recommends no packages. -- no debconf information ksayit_backtrace.txt.gz Description: Binary data
Bug#350630: [pkg-horde] Bug#350630: ftp.debian.org: Please remove horde2 and rdepends
Hello On Mon, Jan 30, 2006 at 09:23:49PM +0100, Lionel Elie Mamane wrote: Package: ftp.debian.org Severity: normal Please remove horde2 from unstable. It is not supported upstream anymore, not even security support. We, the Debian maintainers don't feel we can support it for the duration that etch will be stable and oldstable-but-security-supported. The following packages depend on horde2 and should be removed, too: turba sork-vacation sork-passwd sork-forwards sork-accounts nag mnemo kronolith imp3 We are the maintainers of these packages, too. (Opal is a member of the Debian Horde team.) And I agree on what Lionel state. Regards, // Ola -- Lionel, for the Horde maintenance team ___ pkg-horde-hackers mailing list [EMAIL PROTECTED] http://lists.alioth.debian.org/mailman/listinfo/pkg-horde-hackers -- - Ola Lundqvist --- / [EMAIL PROTECTED] Annebergsslingan 37 \ | [EMAIL PROTECTED] 654 65 KARLSTAD | | +46 (0)54-10 14 30 +46 (0)70-332 1551 | | http://www.opal.dhs.org UIN/icq: 4912500 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350666: quodlibet: fails to start 'segmentation fault'
reassign 350666 python-gst thanks On Mon, 2006-01-30 at 21:40 -0700, Christopher David Desjardins wrote: Package: quodlibet Version: 0.16-2 Severity: grave Justification: renders package unusable When I start quodlibet from the terminal I get the following response... [EMAIL PROTECTED]:~$ quodlibet Segmentation fault Okay, seeing this with an older version of QL confirms the suspicion I had earlier -- the segfault isn't from QL, but from a changed python-gtk2 ABI change. -- Joe Wreschnig [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Bug#350670: fixed patch
The patch I sent is broken, here is one that really works.
--
see shy jo
--- /tmp/hibernate 2006-01-31 00:13:29.0 -0500
+++ /usr/sbin/hibernate 2006-01-31 01:08:38.0 -0500
@@ -206,20 +206,38 @@
# Find a useful XAUTHORITY and ideally a username too if we can!
local xuser xauth xpid
-for xpid in `pidof kwrapper ksmserver kdeinit gnome-session fvwm fvwm2 pwm
blackbox fluxbox X XFree86 Xorg` ; do
- # Ensure the process still exists, and we aren't hallucinating.
- [ -d /proc/$xpid/ ] || continue
-
- xauth=`awk 'BEGIN{RS=\\000;FS==}($1 == XAUTHORITY){print $2}'
/proc/$xpid/environ`
- xhome=`awk 'BEGIN{RS=\\000;FS==}($1 == HOME){print $2}'
/proc/$xpid/environ`
- xuser=`/bin/ls -ld /proc/$xpid/ | awk '{print $3}'`
- [ -z $xauth ] [ -n $xhome ] [ -f $xhome/.Xauthority ]
xauth=$xhome/.Xauthority
-
- XAUTHORITY=$xauth su $xuser -c $xhost /dev/null 21 break
-
- xauth=
- xuser=
+for display in $(seq 0 8); do
+ xuser=$(last :$display | grep 'still logged in' | awk '{print $1}')
|| true
+ if [ -n $xuser ]; then
+ xhome=$(getent passwd $xuser | cut -d: -f 6)
+ if [ -n $xhome ]; then
+ xauth=$xhome/.Xauthority
+ fi
+ fi
+ if [ -z $xhome ] || [ -z $xauth ]; then
+ xauth=
+ xuser=
+ xhome=
+ else
+ break
+ fi
done
+if [ -z $xuser ] ; then
+for xpid in `pidof kwrapper ksmserver kdeinit gnome-session fvwm fvwm2
pwm blackbox fluxbox X XFree86 Xorg` ; do
+ # Ensure the process still exists, and we aren't hallucinating.
+ [ -d /proc/$xpid/ ] || continue
+
+ xauth=`awk 'BEGIN{RS=\\000;FS==}($1 == XAUTHORITY){print $2}'
/proc/$xpid/environ`
+ xhome=`awk 'BEGIN{RS=\\000;FS==}($1 == HOME){print $2}'
/proc/$xpid/environ`
+ xuser=`/bin/ls -ld /proc/$xpid/ | awk '{print $3}'`
+ [ -z $xauth ] [ -n $xhome ] [ -f $xhome/.Xauthority ]
xauth=$xhome/.Xauthority
+
+ XAUTHORITY=$xauth su $xuser -c $xhost /dev/null 21 break
+
+ xauth=
+ xuser=
+ done
+fi
if [ -n $xuser ] ; then
XUSER=$xuser
if [ -n $xauth ] ; then
signature.asc
Description: Digital signature
Bug#350679: ntfsprogs: ntfsresize slow for simple query
Package: ntfsprogs Version: 1.12.1-1 Severity: normal Since upgrading to the latest version, evms has become very slow on launch. Examining the debug logs, I see Jan 30 22:01:06 wheat _8_ Engine: do_fork_and_execvp: execvp = ntfsresize -i -f /dev/evms/hda7 Jan 30 22:01:46 wheat _6_ NTFS: get_min_fs_size: ntfsresize completed with exit code 0 So it looks as if ntfsresize is taking 40 seconds to execute. I've verified this from the command line, and it remains true if I use /dev/hda7 rather than /dev/evms/hda7. It appears that a lot of checks are taking place, so maybe this is a good thing. But maybe not, hence this report. If the behavior is intended, might a mode that is less careful be possible? Thanks. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (990, 'stable'), (50, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27advncdfs Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages ntfsprogs depends on: ii libc6 2.3.5-8GNU C Library: Shared libraries an ii libfuse2 2.3.0-4.1 Filesystem in USErspace library ii libntfs8 1.12.1-1 library that provides common NTFS ntfsprogs recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#341874: RFA rscheme
Hi, as former package maintainer of rscheme and currently uploader of the package I just want to add that I cannot take over from Lars. I do not have sufficiet interest in rscheeme (any more) to invest the time needed to keep the package in shape. -Ralf. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#350666: quodlibet: fails to start 'segmentation fault'
On Mon, 2006-01-30 at 21:40 -0700, Christopher David Desjardins wrote: Package: quodlibet Version: 0.16-2 Severity: grave Justification: renders package unusable When I start quodlibet from the terminal I get the following response... [EMAIL PROTECTED]:~$ quodlibet Segmentation fault Sorry, I realized my response was totally unhelpful for a short term solution. If you upgrade to PyGTK 2.8 from unstable, QL should run fine again. This is a horrible situation between PyGSt and PyGTK. -- Joe Wreschnig [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Bug#350103: Please update debconf PO translation for the package glibc 2.3.5-13
Here is updated Ukrainian translation, please apply.
27 січня 2006 о 11:50 +0100 [EMAIL PROTECTED] написав(-ла):
Hi,
you are noted as the last translator of the debconf translation for
glibc. The English template has been changed, and now some messages
are marked fuzzy in your translation or are missing.
I would be grateful if you could take the time and update it.
Please respect the Reply-To: field and send your updated translation to
[EMAIL PROTECTED] if this bug is still open, or file a new one
otherwise. Here are the changes which have been performed on English
templates, to follow recommandations from
--
Eugeniy Meshcheryakov
# translation of glibc-uk.po to Ukrainian
#
#Translators, if you are not familiar with the PO format, gettext
#documentation is worth reading, especially sections dedicated to
#this format, e.g. by running:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
#Some information specific to po-debconf are available at
#/usr/share/doc/po-debconf/README-trans
# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
#Developers do not need to manually edit POT or PO files.
#
# Eugeniy Meshcheryakov [EMAIL PROTECTED], 2004, 2006.
msgid
msgstr
Project-Id-Version: glibc-uk\n
Report-Msgid-Bugs-To: [EMAIL PROTECTED]
POT-Creation-Date: 2006-01-23 17:33+0100\n
PO-Revision-Date: 2006-01-31 01:37+0200\n
Last-Translator: Eugeniy Meshcheryakov [EMAIL PROTECTED]\n
Language-Team: Ukrainian\n
MIME-Version: 1.0\n
Content-Type: text/plain; charset=UTF-8\n
Content-Transfer-Encoding: 8bit\n
X-Generator: KBabel 1.11.1\n
Plural-Forms: nplurals=3; plural=(n%10==1 n%100!=11 ? 0 : n%10=2
n%10=4 (n%10010 || n%100=20) ? 1 : 2);\n
#. Type: multiselect
#. Description
#: ../debhelper.in/locales.templates:4
msgid Locales to be generated:
msgstr Локалі які потрібно згенерувати:
#. Type: multiselect
#. Description
#: ../debhelper.in/locales.templates:4
msgid
Locale is a framework to switch between multiple languages for users who can
select to use their language, country, characters, collation order, etc.
msgstr
Локаль -- це механізм, що дозволяє перемикатися між кількома мовами для
користувачів, які можуть використовувати свою мову, країну, символи порядок
сортування і т.п.
#. Type: multiselect
#. Description
#: ../debhelper.in/locales.templates:4
msgid
Choose which locales to generate. The selection will be saved to `/etc/
locale.gen', which you can also edit manually (you need to run `locale-gen'
afterwards).
msgstr
Вкажіть, які локалі потрібно створити. Ваш вибір буде збережений у файлі \/
etc/locale.gen\, який ви також можете редагувати вручну (після цього
потрібно запускати \locale-gen\).
#. Type: select
#. Choices
#: ../debhelper.in/locales.templates:14
msgid None, ${locales}
msgstr Не встановлювати, ${locales}
#. Type: select
#. Description
#: ../debhelper.in/locales.templates:16
msgid Default locale for the system environment:
msgstr Локаль за замовчанням в системному оточенні:
#. Type: select
#. Description
#: ../debhelper.in/locales.templates:16
msgid
Many packages in Debian use locales to display text in the correct language
for users. You can change the default locale if you're not a native English
speaker. These choices are based on which locales you have chosen to
generate.
msgstr
В Debian багато пакунків використовують локалі для відображення тексту на
вибраній користувачем мові. Якщо ваша рідна мова не англійська, то ви можете
змінити локаль за замовчанням. Список складений із локалей які ви вирішили
згенерувати.
#. Type: select
#. Description
#: ../debhelper.in/locales.templates:16
msgid
Note: This will select the language for your whole system. If you're running
a multi-user system where not all of your users speak the language of your
choice, then they will run into difficulties and you might want not to set a
default locale.
msgstr
Примітка: цей пункт вибирає мову для всієї системи. Якщо в вашій системі
працюють декілька користувачів, які не розмовляють мовою, яку ви вибрали, то
вони можуть зіткнутися із труднощами, і тому, можливо, вам краще не
встановлювати локаль за замовчанням.
signature.asc
Description: Digital signature
Bug#350680: debconf: updated Ukrainian debconf templates and program translations
Package: debconf
Version: 1.4.69
Severity: wishlist
Tags: patch l10n
Please update Ukrainian translations using attached files (debconf-uk.po
- program translation, debconf-debian-uk.po - temlates).
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-rc1-me
Locale: LANG=uk_UA.UTF-8, LC_CTYPE=uk_UA.UTF-8 (charmap=UTF-8)
Versions of packages debconf depends on:
pn debconf-i18n | debconf-englis none (no description available)
ii perl-base 5.8.7-10 The Pathologically Eclectic Rubbis
Versions of packages debconf recommends:
ii apt-utils 0.6.43.2 APT utility programs
-- debconf information excluded
# translation of debconf-uk.po to Ukrainian
# This file is distributed under the same license as the debconf package.
#
# Eugeniy Meshcheryakov [EMAIL PROTECTED], 2004, 2005, 2006.
msgid
msgstr
Project-Id-Version: debconf-uk\n
Report-Msgid-Bugs-To: \n
POT-Creation-Date: 2006-01-23 19:05+\n
PO-Revision-Date: 2006-01-31 01:41+0200\n
Last-Translator: Eugeniy Meshcheryakov [EMAIL PROTECTED]\n
Language-Team: Ukrainian\n
MIME-Version: 1.0\n
Content-Type: text/plain; charset=UTF-8\n
Content-Transfer-Encoding: 8bit\n
X-Generator: KBabel 1.11.1\n
Plural-Forms: nplurals=3; plural=(n%10==1 n%100!=11 ? 0 : n%10=2
n%10=4 (n%10010 || n%100=20) ? 1 : 2);\n
#: ../Debconf/AutoSelect.pm:76
#, perl-format
msgid falling back to frontend: %s
msgstr буде використовуватися інтерфейс \%s\
#: ../Debconf/AutoSelect.pm:84
#, perl-format
msgid unable to initialize frontend: %s
msgstr не можливо ініціалізувати інтерфейс \%s\
#: ../Debconf/AutoSelect.pm:90
#, perl-format
msgid Unable to start a frontend: %s
msgstr Не вдалося запустити інтерфейс: %s
#: ../Debconf/Config.pm:130
msgid Config database not specified in config file.
msgstr База даних налаштувань не вказана в конфігураційному файлі.
#: ../Debconf/Config.pm:134
msgid Template database not specified in config file.
msgstr База даних шаблонів не вказана в конфігураційному файлі.
#: ../Debconf/Config.pm:139
msgid
The Sigils and Smileys options in the config file are no longer used. Please
remove them.
msgstr
Опції Sigils та Smileys в конфігураційному файлі більше не використовуються.
Видаліть їх, будь ласка.
#: ../Debconf/Config.pm:153
#, perl-format
msgid Problem setting up the database defined by stanza %s of %s.
msgstr Виникла проблема при налаштуванні бази даних, визначеної в строфі %s з
%s.
#: ../Debconf/Config.pm:228
msgid
-f, --frontend\t\tSpecify debconf frontend to use.\n
-p, --priority\t\tSpecify minimum priority question to show.\n
--terse\t\t\tEnable terse mode.\n
msgstr
-f, --frontend\t\tВказати інтерфейс debconf.\n
-p, --priority\t\tВказати мінімальний пріоритет питань, що будуть
показані.\n
--terse\t\t\tДозволити стислий режим.\n
#: ../Debconf/Config.pm:308
#, perl-format
msgid Ignoring invalid priority \%s\
msgstr Ігнорується невірний пріоритет \%s\
#: ../Debconf/Config.pm:309
#, perl-format
msgid Valid priorities are: %s
msgstr Вірні пріоритети: \%s\
#: ../Debconf/Element/Editor/Boolean.pm:30
#: ../Debconf/Element/Editor/Multiselect.pm:31
#: ../Debconf/Element/Editor/Select.pm:31
msgid Choices
msgstr Варіанти
#: ../Debconf/Element/Editor/Boolean.pm:30
#: ../Debconf/Element/Editor/Boolean.pm:36
#: ../Debconf/Element/Editor/Boolean.pm:59
#: ../Debconf/Element/Teletype/Boolean.pm:28
msgid yes
msgstr так
#: ../Debconf/Element/Editor/Boolean.pm:30
#: ../Debconf/Element/Editor/Boolean.pm:39
#: ../Debconf/Element/Editor/Boolean.pm:62
#: ../Debconf/Element/Teletype/Boolean.pm:29
msgid no
msgstr ні
#: ../Debconf/Element/Editor/Multiselect.pm:32
msgid (Enter zero or more items separated by a comma followed by a space (',
').)
msgstr
(Вкажіть необхідну кількість параметрів, розділяючи їх комою з пробілом (',
').)
#: ../Debconf/Element/Gnome.pm:183
msgid _Help
msgstr Допомога
#: ../Debconf/Element/Gnome.pm:185
msgid Help
msgstr Допомога
#: ../Debconf/Element/Gnome/Note.pm:52
msgid Save (mail) Note
msgstr Зберегти повідомлення
#: ../Debconf/Element/Gnome/Note.pm:53
msgid Debconf was asked to save this note, so it mailed it to you.
msgstr
Сценарій налаштування запросив збереження повідомлення, тому його було
відправлено поштою.
#: ../Debconf/Element/Gnome/Note.pm:55
msgid Information
msgstr Інформація
#: ../Debconf/Element/Gnome/Note.pm:56
msgid The note has been mailed.
msgstr Повідомлення було відіслано.
#: ../Debconf/Element/Gnome/Note.pm:60
msgid Error
msgstr Помилка
#: ../Debconf/Element/Gnome/Note.pm:61
msgid Unable to save note.
msgstr Не можу зберегти повідомлення.
#: ../Debconf/Element/Noninteractive/Error.pm:39
msgid
Debconf was not configured to display this error message, so it mailed it to
you.
msgstr
Debconf не був налаштований відображувати це повідомлення про помилку, тому
його
відправлено поштою.
Bug#350669: libpng12-dev: wrong type for tyepdefs
Le mardi 31 janvier 2006 à 06:21 +0100, Goswin Brederlow a écrit : Package: libpng12-dev Version: 1.2.8rel-1 Severity: wishlist Hi, /usr/include/pngconf.h defines among others: typedef unsigned long png_uint_32; Please consider using C99 by replacing those defines with #include stdint.h typedef uint32_t png_uint_32; or at least use an int for 32bit values as that is 32bit across basically all archs in use while long is 32bit or 64bit. MfG Goswin PS: this is wishlist as the comment says at least XX bits long but it also mentions using int on 64bit platforms. However, if this is changed, this will change the ABI on 64-bit platforms. You don't want a libpng ABI transition, do you? -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom signature.asc Description: Ceci est une partie de message numériquement signée
Bug#350662: [Pkg-zope-developers] Bug#350662: zope3: unmet dependencies
Il giorno mar, 31/01/2006 alle 11.52 +0900, Seo Sanghyeon ha scritto: Package: zope3 Version: 3.2.0-1 Severity: serious Justification: Policy 2.2.1 The following packages have unmet dependencies: zope3: Depends: python2.4-mechanize (= 0.0.10a) but it is not installable E: Broken packages python2.4-mechanize has been uploaded togheter with zope3 package, but it is waiting for FTP master's approval. I'll close this bug report as soon as it reaches unstable. Thanks, -- Fabio Tranchitella [EMAIL PROTECTED].''`. Proud Debian GNU/Linux developer, admin and user.: :' : `. `'` http://people.debian.org/~kobold/ `- _ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564 signature.asc Description: Questa parte del messaggio è firmata
