Package: mozplugger
Version: 1.7.1-1
Severity: important
Hello,
because mozplugger started to break with xpdf for unknown reason in
recent versions, I tried to disable the PDF viewing... but it ignores my
changes!
about:plugins in Firefox says:
MozPlugger 1.7.1
Dateiname: mozplugger.so
.commands Eduard Bloch [EMAIL PROTECTED]
You need a passphrase to unlock the secret key for
user: Eduard Bloch [EMAIL PROTECTED]
1024-bit DSA key, ID EDF008C5, created 1999-11-15
Successfully signed commands file
Error: No host
Package: dput
Version: 0.9.2.20
Severity: minor
Hello,
I suggest the attached change to the manpage. Reasons: I did not found
the tool using apropos commands. And I did not look for Debian or
command because of the number of false positives.
Second, the short description is just misleading. A
Package: spamassassin
Version: 3.1.0a-2
Severity: important
Hello,
I have use spamassassin in client/server mode. Unfortunately, sometimes
I need to configure network after the boot up (laptop, mobile usage).
But at boot time, the daemon does not start with the message:
Fri Nov 25 13:29:43
#include hallo.h
* Stefan Potyra [Fri, Nov 25 2005, 04:19:31AM]:
Package: rlog
Followup-For: Bug #339259
Hi,
thanks for maintaining this package.
Attached is a small patch for c2a-transition. Please also remove/rename
debian/librlog1c2.install (new should be librlog1c2a.install, as seen
Package: lilo
Version: 22.6.1-6.2
Severity: grave
Hello,
I had problems upgrading an (almost) regular Woody system to Sarge
(bailed out in postinst, which is better than silent failure, though).
And its lilo version still has problems. Look:
netquarter:/# lilo
Fatal: Filesystem would be
Package: debian-installer
Version: weekly PPC Sarge CD from 28.04.2005
Severity: normal
Hello, I was trying to install a old prep box. I have choosen the
console-server (ssh server) as installation console because of the slow
serial link. AFAICS this was a mistake:
when I rebooted the first time
#include hallo.h
* Eduard Bloch [Wed, May 11 2005, 06:03:51PM]:
#include hallo.h
I have set the root passwort trough a serial console now and tried to
configure the system manualy. However, as one of the first packages,
locales has failed to install:
en.ISO-8859-1...cannot open locale
Package: kernel-build-2.6.8-powerpc
Version: 2.6.8-12
Severity: grave
Hello,
I tried to understand your packaging scheme and IMO you do it _wrong_.
a) kernel-build-KVERS on other architectures is a package with common
files. Your packages seem to play the role of kernel-headers-KVERS
Package: wnpp
Severity: wishlist
* Package name: ivtv
Version : x.y.z
Upstream Author : see http://ivtv.sourceforge.net/
* URL : http://ivtv.sourceforge.net/
* License : (GPL, LGPL, BSD, MIT/X, etc.)
Description : drivers and utilities for WinTV PVR
#include hallo.h
* Joey Hess [Wed, May 11 2005, 11:50:49PM]:
Eduard Bloch wrote:
I have set the root passwort trough a serial console now and tried to
configure the system manualy. However, as one of the first packages,
locales has failed to install:
en.ISO-8859-1...cannot open
Package: debian-installer
Severity: normal
When the paritioner has activated the swap once, and is restarted later
(because of some other problems, for example), it continues though one
of the partitions is currently busy.
It must release swap before writting changes on the partition table.
Package: debian-installer
Severity: normal
I tried to setup the root partition with the JFS filesystem and it
failed after the partitioner has been finished and the filesystems were
to be created. No detailed error messages, just the usual one (creation
failed).
/var/log dump attached.
Regards,
Package: debootstrap
Version: 0.2.45-0.2
Severity: important
Hello,
trying to install using d-i from 28.04, I got this error after 100%
installation of the base system:
The debootstrap program exited with an error (return value 1).
Check /var/log/messages or see virtual console 3 for the
#include hallo.h
* Debian Bug Tracking System [Thu, May 12 2005, 02:18:08AM]:
The same problem appears with other mounted filesystems, they must be
umounted.
Regards,
Eduard.
--
smuuth ich habe Mörder in meinen Aquarium
nobse Killerguppies?
smuuth Skalare
smuuth Mehr fehlen 15 Fische
Madkiss
#include hallo.h
PS: Just retried the same thing under almost the same conditions (using
Ext3 again) and it did work.
Maybe you need to add some sync calls before using umount.
Regards,
Eduard.
--
Kosh Naranek: You are not ready for immortality.
severity 290329 grave
thanks
I tried to install Sarge on a ppc and... it failed! Because at least
some modules have been missing. Following semi-official hints, I figured
out that MODULES=dep needs to be set to make it work. This has been
confirmed by Sven (see below).
Read: currently, it is a
#include hallo.h
* Frans Pop [Thu, May 12 2005, 12:11:50PM]:
I think, as network-console was also used, possibly bug #281530 could also
be a factor here.
Anyway, you ended up with a system half configured from the German and
half configured from the English choice.
I would like to
reassign 274274 apache2
reassign 281697 apache2
severity 274274 normal
tags 274274 + upstream
severity 281697 normal
tags 281697 + upstream
merge 274274 281697
thanks
AFAIKS all those are Apache2 specific problems now. I reviewed the code
and IMO eliminated all potential zombie bombs. The
#include hallo.h
* Borna Novak [Sat, Dec 25 2004, 04:42:59PM]:
Package: apt-cacher
Version: 0.8-4
Followup-For: Bug #264147
This is what I get:
borna0:[100]/home/bbozo $ sudo apt-get update
Err http://borna0 testing/updates/main Packages
404 Not Found
Can you please test the same
tags 230796 +pending
thanks
IMO this is the way to go. If you wish to cheat apt-get on your client,
then you need to modify its configuration there. To get this way of
redundancy, you can follow Alexey's advice (you do not need an own DNS
server, IP mapping in /etc/hosts is enough to make apt-get
#include hallo.h
* Niall Sheridan [Tue, May 17 2005, 05:25:14PM]:
* Package name: md5deep
Please explain which of the features below are not already present in
the cfv package...
Version : 1.6
Upstream Author : Jesse Kornblum [EMAIL PROTECTED]
* URL :
#include hallo.h
* Niall Sheridan [Tue, May 17 2005, 07:29:02PM]:
What do you mean with drawn? What is this library and others? Besides
of this feature, cfv does all that (at least similarly), and much more.
md5deep is intended to be used in computer forensics (though it
obviously has
#include hallo.h
* Ross Boylan [Thu, Dec 29 2005, 07:14:28PM]:
Package: apt-cacher
Version: 1.1
Severity: normal
1. The only outright bugs here are minor: /etc/defaults/apt-cacher should
use default not defaults. (see also point 7 for typo bug).
Ok.
2. For the cache_dir, explain the
## 35_ignore_failures_while_scanning.dpatch by Eduard Bloch [EMAIL PROTECTED]
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: No description.
@DPATCH@
diff -urNad cdrtools-2.01+01a03~/libscg/scsi-linux-sg.c
cdrtools-2.01+01a03/libscg/scsi-linux-sg.c
--- cdrtools-2.01+01a03~/libscg/scsi-linux
Package: tetex-extra
Version: 1.0.2+20021025-7
Severity: grave
Hello,
I cannot install tetex-extra because its preinst shows weird md5sum
problems (see below). I have been told that may be caused by obsolete coreutils,
however this is a up-to-date Sid system (installed with Slink or so and
#include hallo.h
* Matej Vela [Wed, Jan 11 2006, 04:14:12PM]:
Hello Eduard,
Filipus Klutiero [EMAIL PROTECTED] writes:
Package: pppoeconf
Version: 1.8
Severity: serious
Justification: Policy 2.2.1
The copyright file mentions only the GPL, but the manpage seems to
contradict
Package: pstoedit
Version: 3.33-15
Severity: minor
Hello,
I see useability as one of the criteria to estimate the program quality.
The rough estimate of it can be done by comparing the expectations of
DIN-EN-ISO-9241 with the user model of some program.
In this context, pstoedit badly fails.
Package: psi
Version: 0.9.3-2
Followup-For: Bug #305115
Hello,
version 0.10 is out there and the changelog reports fixes of that
problem:
http://freshmeat.net/projects/psijabberclient/?branch_id=28520release_id=216804
Eduard.
-- System Information:
Debian Release: testing/unstable
APT
Package: openoffice.org
Version: 2.0.0-5
Severity: minor
Hello,
when I try to insert new entries using the bibliogrphy data editor, I
cannot use cutpaste to insert URLs into the entry field below. Read: I
push the button and nothing happens. Sometimes it works, sometimes it
does not. First I
#include hallo.h
* Martin Renold [Sat, Dec 10 2005, 01:04:21AM]:
Package: rxvt-unicode-lite
Version: 5.8-1
Severity: normal
Urxvt does not get system messages (talk requests ;) while xterm does.
-rwxr-xr-x 1 root root 1023204 2005-10-26 16:31 /usr/bin/urxvt
-rwxr-sr-x 1 root utmp
#include hallo.h
* LukeC [Sun, Dec 11 2005, 08:13:39PM]:
Package: cdcat
Version: 1.0-3
When I try to use cdcat to scan my DVD data disc I got nice well known
message: Segmentation fault.
There is something fishy in the parser. I get a similar segfault problem
today and tried to find the
You should just drop this dependency, it is pointless since 2.6.14 does
provide fuse. I have done similar things with sl-modem-source, have been
in a similar situation and finally I dropped that dependencies. Users
should be clever enough to read the description.
Eduard.
--
McBulba un nu?
Hello,
this bug is blocking some development. I have heard about troubles with
user management in fuse-utils but this should not prevent other package
upgrades. In my case it blocks the latest C++ transition.
I plan to NMU fuse with the new version and maybe some obvious fixes
before this year
#include hallo.h
* Steve Kemp [Fri, Jul 29 2005, 04:18:14AM]:
This bug is common to all the module-assistant built modules.
The bug was common for _almost all_ modules built in summer. Yes, this
is the compiler disharmony and...
I tried using CC=gcc-3.3 m-a build ... but that failed, I
I think this problem was caused by missing symlinks in one of the
revisions of linux-headers-2.6.12. Can you still reproduce it?
Eduard.
--
edik sind 5... oder 6... Buchstaben.
vuzi, Kaiserslautern 2005
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
#include hallo.h
* DaVinci [Wed, Nov 02 2005, 09:15:17AM]:
Package: rxvt-unicode
Version: 5.8-1
Severity: important
If I log with ssh in a remote machine, can't use dselect and other
terminal tools like mutt, pgsql, etc. The error I get is:
Error opening terminal:
Package: linux-wlan-ng-source
Version: 0.2.2+dfsg-3
Severity: grave
Hello,
I have just pointed by a user on your solution WRT kernel dependency
in debian/control.modules.in and I must admit: IT SUCKS.
- there is no point in setting a such dependency. People can install
their custom kernels
Package: linux-image-2.6.14-1-686
Version: 2.6.14-2
Severity: normal
Hello,
please consider not using CONFIG_MODVERSIONS in future. Reason: it makes
installation of alternative modules with the same names hard till
unpossible. Current example: ipw2200, which is contained in 2.6.14 in a
very old
#include hallo.h
* Bastian Blank [Sat, Nov 05 2005, 12:22:46PM]:
On Sat, Nov 05, 2005 at 11:33:53AM +0100, Eduard Bloch wrote:
please consider not using CONFIG_MODVERSIONS in future. Reason: it makes
installation of alternative modules with the same names hard till
unpossible. Current
#include hallo.h
* Enrico Tassi [Sat, Nov 05 2005, 02:14:57PM]:
On Sat, Nov 05, 2005 at 11:30:40AM +0100, Eduard Bloch wrote:
Package: linux-wlan-ng-source
Version: 0.2.2+dfsg-3
Severity: grave
Hello,
I have just pointed by a user on your solution WRT kernel dependency
in debian
#include hallo.h
* Florian Ernst [Sat, Nov 05 2005, 02:14:53PM]:
Hello Eduard,
coming back to an old issue...
On Wed, 02 Oct 2002 18:12:37 +0200, Eduard Bloch [RHRK] wrote:
See subject. While other programs work with more or less sucess using
256 bit color, xboard breaks completely
Package: fetchmail
Version: 6.2.5.4-1
Severity: important
Hello,
I failed to upgrade a pre-Sarge system to Sid because fetchmail postinst
fails with an useless message (see below). It's right, there are no
servers in /etc/fetchmailrc but postinst should not fail either!
MfG,
Eduard.
Script
#include hallo.h
* Ian Campbell [Mon, Jan 02 2006, 10:02:49AM]:
If Eduard is too busy, I can sponsor you as well. However, I do not
have too much clue about Linux TV as I am just getting started with
that topic. I have a Hauppauge WinTV PVR 350 available for testing,
though.
That would
#include hallo.h
* Thierry Reding [Mon, Jan 02 2006, 09:53:22AM]:
Package: svn-buildpackage
Version: 0.6.14
Severity: wishlist
Tags: patch
Hi,
after some discussion on IRC about the usefulness of a --no-branches option, I
implemented this patch, which adds the --no-branches option to
severity 345406 grave
thanks
Please excuse my boldness if any detected, but I feel the need to
increase the severity of this bug. It hits me too and it seems that it
completely breaks Xsession processing if a local .xsession file exists.
Eduard.
-- System Information:
Debian Release:
#include hallo.h
* Thierry Reding [Mon, Jan 02 2006, 06:48:59PM]:
The patch is relatively small, but may need some cleaning up.
Yeah.
*hint* It would be really handy to see what it is actually supposed
to do by reading something in the manual or at least in a manpage, but
you did
tags 327356 + wontfix
severity 327356 wishlist
thanks
#include hallo.h
* Harri Haataja [Fri, Sep 09 2005, 04:01:29PM]:
/usr/share/apt-cacher/apt-cacher-report.pl has a hardcoded line for the
Report generated row. This leads to wrong/ugly date format on the
page (unless it's what you happen to
Package: xchat
Version: 2.4.5-2
Severity: minor
Hello,
while trying to create a lightweight system for internet access I
discovered that xchat pulls Python and Tcl. For which reason? There is
IMO no good one. Those interpreters are needed for certain plugin
scripts but there are no such scripts
Package: debian-policy
Version: 3.6.2.1
Severity: minor
Hello,
the policy says for scripts (§10.4):
Shell scripts (sh and bash) should almost certainly start with set -e so
that errors are detected. Every script should use set -e or check the
exit status of every command.
This implies that
Package: wpasupplicant
Version: 0.4.4-1
Severity: minor
Hello,
wpa_supplicant.conf tells you to look in
/usr/share/doc/wpasupplicant/wpa_supplicant.conf.gz for details. However, the
path should be:
/usr/share/doc/wpasupplicant/examples/wpa_supplicant.conf.gz .
Further, I wish you would keep
Moin Joerg!
Joerg Schilling schrieb am Samstag, den 01. Oktober 2005:
Applying a patch to /etc/default/cdrecord that introduces
content that _contradicts_ the warnings in the man page and
that caused cdda2wav to (by default) use the bad kernel based
CDDA instead of the SCSI based CDDA inside
Package: x11-common
Version: 6.8.2.dfsg.1-7
Severity: wishlist
Following the IRC discussion with Overfiend and later comments from
gravity, here is the complaint written down as bug report:
please consider no longer using set -e in the Xsession script or at
least set +e and -e later before/after
Erik Schanze schrieb am Donnerstag, den 06. Oktober 2005:
Could you please do something on this bug, at least forward it upstream?
It sucks really to have a modem, that cuts the internet connection
randomly and silently. It could also be a hardware issue, but please
give my some hints to
retitle 332585 Update all docs for --svn-ignore and --svn-reuse
severity 332585 minor
thanks
#include hallo.h
* LI Daobing [Fri, Oct 07 2005, 04:02:27PM]:
Package: svn-buildpackage
Version: 0.6.11
Severity: normal
In manual 5.2.8:
alias svn-b=svn-buildpackage -us -uc -rfakeroot
Moin Marc!
Marc Haber schrieb am Samstag, den 08. Oktober 2005:
Package: apt-cacher
Severity: normal
Hi,
after being in use for some time (like on a computer idling over
night, which uses hourly cron-apt to check for new updates),
apt-cacher gets confused and starts returning error 500.
severity 332768 normal
reassign 332768 apt-listbugs
thanks
#include hallo.h
* michael [Sat, Oct 08 2005, 02:17:06PM]:
Package: apt-cacher
Version: 1.1
Severity: grave
Justification: renders package unusable
Bullshit.
with apt-cacher on a 'server' and apt-listbugs on a 'client' then when
retitle 332748 User::Agent throwing bogus Bad hostname errors after a while
reassign 332748 libwww-perl
thanks
Marc Haber schrieb am Sonntag, den 09. Oktober 2005:
On Sun, Oct 09, 2005 at 05:33:47PM +0200, Eduard Bloch wrote:
See attached log of a failed aptitude update run, and the working
Package: ucf
Version: 2.002
Severity: minor
Hello,
the problem is easy to reproduce:
root @debian:/tmp$ locate fooma a
root @debian:/tmp$ ucf /tmp/a /tmp/b
Creating config file /tmp/b with new version
root @debian:/tmp$ ucf --purge /tmp/b
root @debian:/tmp$ ucf /tmp/a /tmp/b
Now a
Package: ctrlproxy
Version: 2.6.2.1
Severity: normal
Hello,
when I simply use the shipped example file, ctrlproxy just breaks with
the message below. I think it should tollerate plugin load failure,
especially since the lib is just in the Suggest: field.
Unable to open module
Package: ctrlproxy
Version: 2.6.2-1
Severity: normal
Tags: upstream
Hello,
I have this setting in the config:
plugin autoload=1 file=liblog_irssi
logfile/home/bloch/tmp/ctrlproxy/logfile
/plugin
However, the plugin does not load. Reason: it creates the first
non-existent directory with wrong
Package: pbuilder
Version: 0.135
Severity: wishlist
Hello,
it seems that pbuilder tries to get the basedebs from some hardcoded FTP
mirror URL, http://ftp.jp.debian.org/debian. This is maybe fine for the
maintainer, but not for us in the outside world. In fact, it should try
to get the mirror
Package: firehol
Version: 1.231-4
Severity: normal
Hello,
it seems that you have changed the upstream package and moved the helpme
function into a separate utility. Fine, but please consider doing that
somehow consistent with http://firehol.sourceforge.net/tutorial.html? -
currently neither
Package: vim-common
Version: 1:6.4-001+2
Severity: normal
Hello,
after todays Sid upgrade the vim installation broke. The new symlinks in
/usr/bin to the alternatives links were just missing. I think it comes from
some
internal breakage in update-alternatives, I have seen it doing strange
#include hallo.h
* André Bertelli Araújo [Sun, Oct 23 2005, 10:42:59PM]:
Package: sl-modem-daemon
Version: 2.9.9a
When calling the program 'pon' to stablish a dial-up connection, the
modem does a 'click' (as if preparing to dial), but doesn't dial
anything. The following message appear in
#include hallo.h
* André Bertelli Araújo [Mon, Oct 24 2005, 09:48:56PM]:
- Restarted with /etc/init.d/slmodemd restart
- then the following message appeared:
Loading SmartLink Modem driver into kernel ... failed.
FATAL: Could not open '/lib/modules/2.6.11-1-686/misc/slamr.ko': No
such file
#include hallo.h
* Stefano Zacchiroli [Tue, Oct 25 2005, 11:08:31AM]:
Info that could help can be:
BTW, about your mention of /usr/bin/gvim in the bug reposrt subject: are
you really missing /usr/bin/gvim?
That would be really strange since it is not created with
update-alternatives, but
reassign 335502 dpkg
thanks
#include hallo.h
* Stefano Zacchiroli [Tue, Oct 25 2005, 10:44:54AM]:
tags 335502 + moreinfo unreproducible
thanks
Eduard Bloch wrote:
after todays Sid upgrade the vim installation broke. The new symlinks
in /usr/bin to the alternatives links were just missing
#include hallo.h
* Stefano Zacchiroli [Tue, Oct 25 2005, 12:47:20PM]:
[ Of course I asked this information again just a ms before receiving
your mail, sorry for that ]
On Tue, Oct 25, 2005 at 12:36:13PM +0200, Eduard Bloch wrote:
reassign 335502 dpkg
thanks
I don't think it worked
#include hallo.h
* André Bertelli Araújo [Thu, Oct 27 2005, 11:49:35PM]:
2005/10/24, Eduard Bloch [EMAIL PROTECTED]:
#include hallo.h
* André Bertelli Araújo [Mon, Oct 24 2005, 09:48:56PM]:
- Restarted with /etc/init.d/slmodemd restart
- then the following message appeared
Package: openoffice.org-core
Version: 2.0.0-1
Severity: normal
Hello,
I am using OOv2 in UTF-8 environment. Unfortunately, when I try to open
a file having an Umlaut (encoded in Latin1), it simply fails immediately
after displaying the splash screen and complains about not beeing able
to open to
#include hallo.h
* André Bertelli Araújo [Sat, Oct 29 2005, 07:46:45PM]:
2005/10/28, Eduard Bloch [EMAIL PROTECTED]:
#include hallo.h
* André Bertelli Araújo [Thu, Oct 27 2005, 11:49:35PM]:
2005/10/24, Eduard Bloch [EMAIL PROTECTED]:
#include hallo.h
* André Bertelli Araújo [Mon
tags 336505 + moreinfo
thanks
#include hallo.h
* Luca Capello [Sun, Oct 30 2005, 09:30:47PM]:
Package: vpnc
Version: 0.3.3+SVN20051028-1
Severity: important
Hello!
I don't remember correctly since which version (I'm sorry, I don't use
VPNC as often), but I'm sure the last time I got it
Package: yaird
Version: 0.0.11-9
Severity: normal
Hello,
mkinitrd.yaird fails on my system with:
Using /usr/sbin/mkinitrd.yaird to build the ramdisk.
Full list of probed ramdisk generating tools : /usr/sbin/mkinitrd
/usr/sbin/mkinitrd.yaird /usr/sbin/mkinitramfs.
yaird error: malformed line in
#include hallo.h
* Luca Capello [Mon, Oct 31 2005, 08:57:26PM]:
Hello!
On Mon 31 Oct 2005 16:33 +0100, Luca Capello wrote:
On Sun 30 Oct 2005 22:34 +0100, Eduard Bloch wrote:
Oh damn, not script trouble again. Please apply the attached patch
to /etc/vpnc/vpnc-script.conf . If that does
#include hallo.h
* Luca Capello [Tue, Nov 01 2005, 09:53:17PM]:
Hello!
On Tue 01 Nov 2005 09:47 +0100, Eduard Bloch wrote:
Interesting. It is not your university's config, it is in your
routing configuration, _before_ you connect. Look:
++ ip route get 192.33.214.142
Lol, this was the original purpose for svn-buildpackage, called
svn-devscripts those days. (however for a custom branch of Herbert Xu
packages and some others) But... while rewritting svn-inject to Perl,
that feature got lost and nobody asked for it explicitely in the last
months/years.
#include hallo.h
* Felipe Sateler [Fri, Oct 14 2005, 02:30:01AM]:
Package: mono
Version: 1.1.9.1-3
Severity: important
libgdiplus and libmono0 are not dependencies of mono, which makes most
GUI .NET programs unusable. libmono0 should be a dependency, and
libgdiplus should at least be
Package: apache2
Version: 2.0.54-5
Severity: normal
Simple example:
RewriteEngine on
RewriteBase /cgi-bin
RewriteRule ^ - [E=REQUEST_URIX:somestring]
RewriteRule ^ - [E=REQUEST_URI:/real/location]
REQUEST_URIX ends up in the CGI environment, while REQUEST_URI is _not_
replaced. It shows the
#include hallo.h
* David Weinehall [Sun, Oct 16 2005, 12:29:06PM]:
Package: vpnc
Version: 0.3.3+SVN20050909-4
Severity: important
With the latest few 0.3.3 svn snapshots of vpnc, the routing information
no longer seems to be set up correctly. Also, there's an extra warning
about RTNETLINK
#include hallo.h
* Marv Stodolsky [Mon, Oct 17 2005, 02:13:40PM]:
Package: kernel-kbuild-2.6-3
Version: 2.6.8-2
Severity: wishlist
Tags: patch
Where is your patch? I see just an obscure wish.
Hint: packages using module-assistant do already choose the right
compiler or print a warning like
#include hallo.h
* Bastian Blank [Tue, Oct 18 2005, 09:13:59AM]:
Package: vpnc
Version: 0.3.3+SVN20050909-4
Severity: critical
vpnc overwrites /etc/resolv.conf without notice. This breaks the
network connectivity as the entries don't match the local needs.
A-Ha. Are you sure you have set
notfound 334500 0.9.5
thanks
#include hallo.h
* VSJ [Tue, Oct 18 2005, 01:00:12PM]:
I don't know if this bug applies to the version in
etch/sid/experimental, that's why I've tagged this 'sarge'.
It doesn't, consider installing the version from Sid. Dependencies
should be satisfiable with
#include hallo.h
* Matthijs Mohlmann [Wed, Oct 19 2005, 11:34:40AM]:
Package: svn-buildpackage
Version: 0.6.13
Severity: important
Hi,
I use svn-buildpackage together with pdns for building and use the
following line:
svn-buildpackage --svn-builder=pdebuild --buildresult
severity 334699 normal
tags 334699 + moreinfo
thanks
#include hallo.h
* Waqar Malik [Wed, Oct 19 2005, 05:47:30AM]:
Package: vpnc
Version: 0.3.3+svn20050909-4
Severity: critical
Please read the definition of critical.
IPSEC SA selected des-md5
S7.7
S7.8
Error: an inet prefix is expected
#include hallo.h
* Waqar Malik [Fri, Oct 21 2005, 02:39:25AM]:
The error still surfaces while using vpnc_0.3.3+SVN20050909-5_i386.deb
Error meaasge changed slightly Error: an inet prefix is expected
rather than @.
Aha. Please send your config file and all the important information that
you
Package: zd1211-source
Version: 0.0.0.svnr23-3
Severity: important
Hello,
I suggest you edit debian/rules and move m-a relevant include... lines
after those with CDBS. Why? CDBS poisons the environment for no good
reason, and even if you try that save from envrironment trick with the
variable
#include hallo.h
* Marco d'Itri [Sat, Nov 12 2005, 12:42:07PM]:
Package: sl-modem-source
Version: 2.9.9d-7
Severity: serious
See policy 10.6: packages must use MAKEDEV instead of calling mknod.
I suggest changing the policy to reflect the reality. Using a wrapper
like MAKEDEV to maintain
#include hallo.h
* Eduard Bloch [Sun, Nov 13 2005, 10:17:55AM]:
Further, I expect from you as a carefull maintainer to write at least a
simple HOWTO for your fellows about how (exactly) to deal with
changes/transition to udev. You simply throw people into cold water.
Feel free to tell me
#include hallo.h
* Sam Hocevar [Sun, Nov 13 2005, 10:49:21PM]:
severity 331549 important
thanks
Hi, I am raising the severity to important because liballegro4.2 just
entered unstable. Since there are now 3 different versions of Allegro in
Debian, I am going to ask for the removal of
#include hallo.h
* Christoph Kaminski [Thu, Nov 17 2005, 11:22:36PM]:
Package: vpnc
Version: 0.3.3+SVN20051028-2
Severity: wishlist
Update yes in conf File replace resolv.conf, can you implement a new
option to extend the org resolv.conf?
Maybe, but why? Can you extend resolvconf's package
Package: libfuse-dev
Version: 2.4.0-1
Severity: grave
Hello,
I got a FTBFS problem while doing transition of rlog and encfs - the
fuser_unmount symbol seems to be not seen by the linker for some reason.
The problem disappears after creating my own fuse packages with upstream
version 2.4.1. The
tags 340351 + confirmed
thanks
~ # fusermount -u /home/seb/clear
fuse failed. Common problems:
- fuse kernel module not installed (modprobe fuse)
- invalid options -- see usage message
But the return code is 0, and the volume got unmounted:
~ # echo $?
0
~ # mount |
#include hallo.h
* Joerg Schilling [Tue, Dec 05 2006, 02:56:31PM]:
Yor problem is caused by either a Linux kernel bug or by
a defective libscg in the Debian fork of cdrtools.
Yes, of course, others are stupid and evil because they play with my
toys without me, nya, nya. I assume this is the
#include hallo.h
* Mike Hommey [Wed, Dec 06 2006, 08:36:16PM]:
On Tue, Dec 05, 2006 at 05:02:19PM +0100, Eduard Bloch [EMAIL PROTECTED]
wrote:
#include hallo.h
* Adrian Bunk [Tue, Dec 05 2006, 11:16:49AM]:
Package: icedax
Version: 9:1.1.0-1
Severity: wishlist
The name icedax
#include hallo.h
* Mike Hommey [Thu, Dec 07 2006, 07:58:20AM]:
On Thu, Dec 07, 2006 at 01:48:55AM +0100, Eduard Bloch [EMAIL PROTECTED]
wrote:
#include hallo.h
* Mike Hommey [Wed, Dec 06 2006, 08:36:16PM]:
On Tue, Dec 05, 2006 at 05:02:19PM +0100, Eduard Bloch [EMAIL
PROTECTED] wrote
Version: 1.1.0
This problem is already fixed in unstable.
#include hallo.h
* Mathieu Malaterre [Fri, Dec 08 2006, 03:00:23PM]:
Package: wodim
Version: 5:1.0-1
Severity: normal
There seems to be a typo in debian/rules. There is no such thing as
CMAKEFLAGS, my guess is that the author
#include hallo.h
*Joerg Schilling [Sun, Dec 10 2006, 10:38:15PM]:
First, sccsids are unused code. They have been removed for technical
reasons, and because no usual user and no regular program seem to use
them (see below). And they are disturbing the QA work by triggering
compiler warnings. But
tags 402709 +help
thanks
Hello people,
this bug report confuses me. There are two options for loging, -l and -d
and none does explain what actually is logged somewhere. And the default
-d value seems to be 1 and not 0. And even with 0 it seems to dump data
into the logfile, AFAICS the structs
#include hallo.h
* Joerg Schilling [Tue, Dec 12 2006, 08:14:35PM]:
Package: mkisofs
Version: 4:2.01+01a03-5
Severity: normal
There is bug in options handling. It should not matter in which order
the options are given. See below for demonstation.
-rJf ERROR
-frJ ok
1 - 100 of 1753 matches
Mail list logo
