On Sun, 27 Dec 2020 23:56:21 +
Graham Seaman wrote:
> I'm having problems with pppd and an intermittent phone line
> connection. My external line occasionally drops out, usually
> briefly ... .
There is or used to be a daemon that would re-establish a modem
connection if it saw an
On 28/12/2020 09:34, Tixy wrote:
> On Sun, 2020-12-27 at 23:56 +, Graham Seaman wrote:
>> I'm having problems with pppd and an intermittent phone line connection.
>> My external line occasionally drops out, usually briefly (I'm trying to
>> get this fixed
Hi Tomas
On 28/12/2020 09:28, to...@tuxteam.de wrote:
> On Sun, Dec 27, 2020 at 11:56:21PM +, Graham Seaman wrote:
>> I'm having problems with pppd and an intermittent phone line
>
> Wow. Memories fading :-)
>
> OK, my recollection on inittab is a bit dusty, and I hav
On 27/12/2020 23:56, Graham Seaman wrote:
I'm having problems with pppd and an intermittent phone line
connection. My external line occasionally drops out, usually briefly
(I'm trying to get this fixed but need a workaround in the meantime).
When the line goes down, I get this sequence:
Dec
On Sun, 2020-12-27 at 23:56 +, Graham Seaman wrote:
> I'm having problems with pppd and an intermittent phone line connection.
> My external line occasionally drops out, usually briefly (I'm trying to
> get this fixed but need a workaround in the meantime). When the line
> goes
On Sun, Dec 27, 2020 at 11:56:21PM +, Graham Seaman wrote:
> I'm having problems with pppd and an intermittent phone line
Wow. Memories fading :-)
OK, my recollection on inittab is a bit dusty, and I have little
experience with systemd (trying to keep it that way). But I'll
try a s
I'm having problems with pppd and an intermittent phone line connection.
My external line occasionally drops out, usually briefly (I'm trying to
get this fixed but need a workaround in the meantime). When the line
goes down, I get this sequence:
Dec 27 01:35:03 snoopy pppd[22798]: No response
users). Seems like pppd is totally
incompatible with libradcli4: when I add
plugin radius.so
plugin radattr.so
into the /etc/ppp/options.xl2tpd configuration file, pppd starts
complaining about missing directives:
first, /etc/radiusclient/radiusclient.conf cannot be read. Okay, I
don't know
Hello,
I'm trying to set up the VPN stack using xl2tpd/strongswan on recent
Debian 9.5, and so far everything is working except radius
authentication (I have a freeradius3 setup which is fully working, so I
need to use it to authenticate users). Seems like pppd is totally
incompatible
On Thu 17 May 2018 at 09:14:48 (+0200), Morel Bérenger wrote:
> Hello.
>
> I am trying to make the pppd process to die if connection failed or is
> lost, so that I could restart the connection with a different script (I
> could tweak the chat script, but I'm still new to modem
Hello.
I am trying to make the pppd process to die if connection failed or is
lost, so that I could restart the connection with a different script (I
could tweak the chat script, but I'm still new to modem stuff and from
the doc I can hardily find how to only specify the PIN code "onc
Hi folks,
during my experiences with several login tools with gui I remarked a little
issue which I offer for discussion.
I remarked, when a login is starting, the user is asked for the root password
when the process pppd started. So I checked the situation.
On my system /usr/bin/pppd
Rusi Mody rustompm...@gmail.com writes:
On Sunday, August 24, 2014 2:40:01 AM UTC+5:30, lee wrote:
Hi,
what might be the reason that pppd does not start the scripts given in
the config in use with the connect and disconnect options?
I had a thread out here on ppp not starting on startup
Hi,
what might be the reason that pppd does not start the scripts given in
the config in use with the connect and disconnect options?
,
| connect script
| [...]
| This option specifies an command for pppd to execute (by passing it to
| a shell) before attempting to start PPP
On Sunday, August 24, 2014 2:40:01 AM UTC+5:30, lee wrote:
Hi,
what might be the reason that pppd does not start the scripts given in
the config in use with the connect and disconnect options?
I had a thread out here on ppp not starting on startup as it used to
Assuming thats what you
]}#@!}!p}
}=}!}$}%\}}[7f][7f][7f][7f]}%}}7:[:}1}$}%\}2}}3}#}!p-~
-- PPP negotiation detected.
-- Starting pppd at Thu Jul 31 01:13:01 2014 -- Pid of pppd: 4211 --
pppd: (%?[08]@#?[08]
-- Disconnecting at Thu Jul 31 01:13:01 2014 -- The PPP daemon has
died: No ppp module error (exit code = 4
El 31/07/14 17:00, Eduardo Rios escribió:
El 31/07/14 a las #4, Eduardo Rios escribió:
Hola. Yo también hago uso de Debian Jessie. No sé si será por el error
que comentas, pero a mi hoy me ha ofrecido actualizar el kernel a la
versión 3.14-2
Se me olvidó añadir que mi kernel es amd64.
Acabo
is: 10.72.0.79 MTU is 1500 bytes
~[7f]}#@!}!p} }=}!}$}%\}}[7f][7f][7f][7f]}%}}7:[:}1}$}%\}2}}3}#}!p-~
-- PPP negotiation detected.
-- Starting pppd at Thu Jul 31 01:13:01 2014
-- Pid of pppd: 4211
-- pppd: (%�[08]@#�[08]
-- Disconnecting at Thu Jul 31 01:13:01 2014
-- The PPP daemon has died: No ppp module
to INTERNET!
Protocol selected, please continue...
Your IP address is: 10.72.0.79 MTU is 1500 bytes
~[7f]}#@!}!p} }=}!}$}%\}}[7f][7f][7f][7f]}%}}7:[:}1}$}%\}2}}3}#}!p-~
-- PPP negotiation detected.
-- Starting pppd at Thu Jul 31 01:13:01 2014
-- Pid of pppd: 4211
-- pppd: (%�[08]@#�[08
to INTERNET!
Protocol selected, please continue...
Your IP address is: 10.72.0.79 MTU is 1500 bytes ~[7f]}#@!}!p}
}=}!}$}%\}}[7f][7f][7f][7f]}%}}7:[:}1}$}%\}2}}3}#}!p-~
-- PPP negotiation detected.
-- Starting pppd at Thu Jul 31 01:13:01 2014 -- Pid of pppd: 4211 --
pppd: (%�[08]@#�[08
selected, please continue...
Your IP address is: 10.72.0.79 MTU is 1500 bytes
~[7f]}#@!}!p} }=}!}$}%\}}[7f][7f][7f][7f]}%}}7:[:}1}$}%\}2}}3}#}!p-~
-- PPP negotiation detected.
-- Starting pppd at Thu Jul 31 01:13:01 2014
-- Pid of pppd: 4211
-- pppd: (%�[08]@#�[08]
-- Disconnecting at Thu Jul 31 01:13:01
El 31/07/14 a las #4, Eduardo Rios escribió:
Hola. Yo también hago uso de Debian Jessie. No sé si será por el error
que comentas, pero a mi hoy me ha ofrecido actualizar el kernel a la
versión 3.14-2
Se me olvidó añadir que mi kernel es amd64.
--
www.LinuxCounter.net
Registered user #558467
Have you found the problem yet?
On Thu, Sep 20, 2012 at 01:21:33PM -0700, Mike McClain wrote:
Howdy,
I'm on dialup using pppd and loosing the connection often in the
middle of fetching mail or loading some URL in the browser. I'm hoping
for suggestions to help me debug the problem
get although OTOH, dialup links are
very unreliable, it's quite usual to get random disconnects.
snip
I think the first to do would be enabling verbose/debug logging for
pppd.
Since my first post showed that crtscts, modem and debug are
included
Ooops, you're right, I overlooked
On Thu, 20 Sep 2012 13:21:33 -0700, Mike McClain wrote:
I'm on dialup using pppd and loosing the connection often in the
middle of fetching mail or loading some URL in the browser. I'm hoping
for suggestions to help me debug the problem.
(...)
My logs show this when I close
quite usual to get random disconnects.
snip
I think the first to do would be enabling verbose/debug logging for pppd.
Since my first post showed that crtscts, modem and debug are included
in /etc/ppp/options I assume you are saying they should be somewhere
else as well but you forgot to say
Howdy,
I'm on dialup using pppd and loosing the connection often in the
middle of fetching mail or loading some URL in the browser. I'm hoping
for suggestions to help me debug the problem.
root@/deb60:~ grep -v '^\s*$\|^#' /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
Hi,
I'm trying to connect with a GSM USB modem ZTE MF-100 (USB ID 19d2:0039)
to a mobile broadband network (German Congstar = network of German
Telecom) with debian testing.
Using KDE NetworkManager, my problem is that pppd doesn't answer the CHAP
challenge and runs into a timeout (see log
On Sun, 2012-01-15 at 20:52 +0100, Stefan Rutzinger wrote:
Dec 31 17:18:11 stefano NetworkManager[1725]:SCPlugin-Ifupdown: device
added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown
configuration found.
On Arch I had such an issue, can't remember what my Debian settings
On Sun, 2012-01-15 at 23:11 +0100, Ralf Madorf wrote:
On Sun, 2012-01-15 at 20:52 +0100, Stefan Rutzinger wrote:
Dec 31 17:18:11 stefano NetworkManager[1725]:SCPlugin-Ifupdown: device
added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown
configuration found.
On Arch I
Hi Scott,
of course, this shall not change to my problem. As you suggest, I will change
from umtsmon to kppp and see, if this will work with latest ppp. If it
doesn't, I will be pleased to help as well as I can.
And sorry for my statements, I just wanted to explain, why I stated ppp to be
Hi Scott,
you are right, I mentioned umtsmon. But the problem was not beeing umtsmon
updated, but ppp updated. Umtsmon is just a GUI to call ppp with additional
parameters, nothing else.
So the problem was IMO in ppp, as the only thing, which was changed, was the
ppp binary, NOT umtsmon. I
umtsmon
updated, but ppp updated. Umtsmon is just a GUI to call ppp with additional
parameters, nothing else.
Well - that's your opinion (and surely you are entitled to it) :-)
It's why I/we stopped using UMTSmon and moved to Kppp. Works for us as
*we* want the fixes from the updated pppd. I
. Suggestions below (Hans):-
Network manager seems to interfere with other programs like Kppp and
UMTSmon broken... try not to install it when you plan on using another
management tool.
To rule out UMTSmon as the problem try:-
# echo echo AT+CPIN=3521^M^M /dev/ttyUSB0
# pppd ttyUSB0 460800 nodetach
I think, it is a bug in package ppp. Almost a year ago I sent a bugreport to
ppp, but no one tried to figure out, what was the problem.
Anyway, i reverted to the package of debian/stable and set it to hold, to
avoid an update.
Hans
--
To UNSUBSCRIBE, email to
On 24/09/11 02:52, Hans-J. Ullrich wrote:
I think, it is a bug in package ppp. Almost a year ago I sent a bugreport
to
ppp, but no one tried to figure out, what was the problem.
Anyway, i reverted to the package of debian/stable and set it to hold, to
avoid an update.
Hans
Works
On 22/09/11 06:30, Illy wrote:
Dear friends
Usually I use 3g modem for my internet connection. But since I did
apt-get update apt-get upgrade, I can not use my 3g internet
connection anymore.
My kppp dialing process hang up on 'starting pppd'. I didn't change
anything
Hi, Scott...
Yes, my modem use '/dev/ttyUSB2'.
I've tried switching-off my wlan and unplug my wireline ethernet. But
bring no change. My kppp hang up on 'starting pppd' without ending.
Sep 23 04:32:24 mefi pppd[13458]: pppd 2.4.5 started by ceo, uid 1000
Sep 23 04:32:24 mefi pppd[13458
On 23/09/11 07:46, Illy wrote:
Hi, Scott...
Yes, my modem use '/dev/ttyUSB2'.
I've tried switching-off my wlan and unplug my wireline ethernet. But
bring no change. My kppp hang up on 'starting pppd' without ending.
Sep 23 04:32:24 mefi pppd[13458]: pppd 2.4.5 started by ceo, uid 1000
Dear friends
Usually I use 3g modem for my internet connection. But since I did
apt-get update apt-get upgrade, I can not use my 3g internet
connection anymore.
My kppp dialing process hang up on 'starting pppd'. I didn't change
anything the configuration of my kppp.
Anybody has ever
-Original Message-
From: cosme co...@esid.gecgr.co.cu
To: BasaBuru basab...@basatu.org
Date: Mon, 09 May 2011 09:15:42 -0500
Subject: Re: pppd debian cliente a windows server como ISP
Gracias por tus anotaciones
Pero te aseguro que este correo hace bastante lo estoy pasando pero
Hola
Por mucho tiempo estuve tratando de establecer conexion via modem con mi ISP
que es windows server 2003
Ya logré conectar con el dichoso mschap-v2, pero hasta ahí no hay
respuesta del isp
aqui muestro los logs
my /var/log/messages
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5 started by root, uid 0
Apr 28 09:48:44 sax pppd[6140]: Using interface ppp0
Apr 28 09:48:44 sax pppd[6140]: Connect: ppp0 -- /dev/ttyS0
Apr 28 09:48:45 sax pppd[6140]: CHAP authentication succeeded
Apr 28 09:48:45 sax pppd[6140]: MPPE 128-bit
Hi
For a lot of time I have been being about carrying out client's linux
connection to my ISP windows server 2003, finally I achieved it.
but now there is not transfer, treatment of making ping but there is not
answer.
my /var/log/messages
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5
Hola
Por mucho tiempo estuve tratando de establecer conexion via modem con mi ISP
que es windows server 2003
Ya logré conectar con el dichoso mschap-v2, pero hasta ahí no hay
respuesta del isp
aqui muestro los logs
my /var/log/messages
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5
el dichoso mschap-v2, pero hasta ahí no hay
respuesta del isp
aqui muestro los logs
my /var/log/messages
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5 started by root, uid 0
Apr 28 09:48:44 sax pppd[6140]: Using interface ppp0
Apr 28 09:48:44 sax pppd[6140]: Connect: ppp0 -- /dev/ttyS0
Apr 28
Hi
For a lot of time I have been being about carrying out client's linux
connection to my ISP windows server 2003, finally I achieved it.
but now there is not transfer, treatment of making ping but there is not
answer.
my /var/log/messages
Apr 28 09:48:44 sax pppd[6140]: pppd 2.4.5 started
I just need a temporary pppoe server, that only uses PAP
___Can someone post a howto, just in a few lines, what to do?___
If I just do pppd require-pap then it gives this error:
pppd: The remote system is required to authenticate itself
pppd: but I couldn't fin any suitable secret (password
W dniu 4 września 2010 14:54 użytkownik R.M.M rm...@op.pl napisał:
Witam,
czy jest jakis sposob, zeby zmusic pppd do wyplucia informacji o szerokosci
pasma, jakie przydzielil serwer pppoe dla aktualnego polaczenia?
Moj stary router DSL wyswietlal takie informacje (zanim jeszcze otrzymal IP
W dniu 2010-09-04 19:08, Wojciech Ziniewicz pisze:
W dniu 4 września 2010 14:54 użytkownik R.M.Mrm...@op.pl napisał:
Witam,
czy jest jakis sposob, zeby zmusic pppd do wyplucia informacji o szerokosci
pasma, jakie przydzielil serwer pppoe dla aktualnego polaczenia?
Moj stary router DSL
W dniu 4 września 2010 20:09 użytkownik R.M.M rm...@op.pl napisał:
Mowisz?;) Sprawdzilem dokladnie zanim napisalem. Nawet z wlaczona opcja
debug nigdzie nie ma ani slowa o tym, jaka jest predkosc ustanowionego
polaczenia. Szukalem juz nawet czy moze pppd trzeba jakis sygnal wyslac,
zeby sie
+0800,Guo Jiahua写道:
Hi, everyone,
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect.
My ISP requires a MAC address which is different from my laptop.
So, I think, I must change the MAC address (by using command ip link
set ethX
On Sb, 31 iul 10, 05:12:13, Guo Jiahua wrote:
Hi, everyone,
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect.
My ISP requires a MAC address which is different from my laptop.
So, I think, I must change the MAC address (by using
On Sat, 31 Jul 2010 05:20:59 +0800, Guo Jiahua wrote:
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect. My ISP requires a MAC address
which is different from my laptop. So, I think, I must change the MAC
address (by using command
Hi,
On Sat, Jul 31, 2010 at 05:12:13AM +0800, Guo Jiahua wrote:
Hi, everyone,
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect.
My ISP requires a MAC address which is different from my laptop.
MAC ? IN what way they require MAC
Hi, everyone,
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect.
My ISP requires a MAC address which is different from my laptop.
So, I think, I must change the MAC address (by using command ip link
set ethX address XX:XX:XX:XX:XX:XX
Hi, everyone,
I'm a user of DEBIAN 5.0. And I use adsl to connect to the Internet. I
think pppd is the key program to connect.
My ISP requires a MAC address which is different from my laptop.
So, I think, I must change the MAC address (by using command ip link
set ethX address XX:XX:XX:XX:XX:XX
it
starts a modem connection by using pppd.
This is fine working, when I am starting it as user root. (I use sux to
become root from a normal user).
When I start umtsmon as normal user, pppd is not allowed to be used by this
user. This is ok, I want only users in a special group use pppd.
So far
I start it, it is started, and when I want to connect to the internet it
starts a modem connection by using pppd.
This is fine working, when I am starting it as user root. (I use sux to
become root from a normal user).
When I start umtsmon as normal user, pppd is not allowed to be used
(this is for gprs-
access). Umtsmom is a single binary located in /usr/bin.
When I start it, it is started, and when I want to connect to the internet
it
starts a modem connection by using pppd.
This is fine working, when I am starting it as user root. (I use sux to
become root from
- access). Umtsmom is a single binary located in /usr/bin.
When I start it, it is started, and when I want to connect to the
internet it starts a modem connection by using pppd.
This is fine working, when I am starting it as user root. (I use sux
to become root from a normal user
On Tue, 26 Jan 2010 20:30:41 +0100, Hans-J. Ullrich wrote:
(...)
A solution is already available: As I am already root on the system, I
just start it as root. :)
Sorry for the noise but... that seems far from a solution :-P
Greetings,
--
Camaleón
--
To UNSUBSCRIBE, email to
Am Dienstag, 26. Januar 2010 schrieb Alex Samad:
may your user part of dialout. Only root and dialout are allowed to
execute this bin see rwsr-x--- if it was rwsr-xr-x every one would be
allowed to
That is exactly my profile and what I wanted to do: Sadly it did not work, and
I dunno
), then umtsmon should start with the
rights of root and should be also allowed to start pppd! But i does
clearly NOT! I get the maesage: pppd is not allowed to start, only root
is allowed to start it.
What do I do wrong? Where do I think wrong?
IIRC, having the stick bit set on a binary only
it, it is started, and when I want to connect to the internet it
starts a modem connection by using pppd.
This is fine working, when I am starting it as user root. (I use sux to
become root from a normal user).
When I start umtsmon as normal user, pppd is not allowed to be used
Hi
I am trying to create a pptp tunnel over a vpn (work related), it seems
like the work client checks the route table for any changes :(, thats
cool, I have route table 50 setup for all my extra pppd routing I want,
but, it seems like whenever pppd (or is it pptp) starts talking to an end point
CONNECT 115200
-- Carrier detected. Waiting for prompt.
-- Don't know what to do! Starting pppd and hoping for the best.
-- Starting pppd at Tue Dec 1 08:13:53 2009
-- Pid of pppd: 3109
-- Using interface ppp0
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08
know what to do! Starting pppd and hoping for the best.
-- Starting pppd at Tue Dec 1 08:13:53 2009
-- Pid of pppd: 3109
-- Using interface ppp0
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- Disconnecting at Tue Dec 1
CONNECT 115200
-- Carrier detected. Waiting for prompt.
-- Don't know what to do! Starting pppd and hoping for the best.
-- Starting pppd at Tue Dec 1 08:13:53 2009
-- Pid of pppd: 3109
-- Using interface ppp0
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08]0¥e[08]
-- pppd: §e[08
Hi list,
Does anybody know if it is possible to use pppd in a vserver? I am
currently trying to set up a pptpd vpn server inside a vserver
environment, but it fails on
Jul 19 23:09:02 vserver pppd[18802]: ioctl(SIOCSIFDSTADDR): Cannot
assign requested address (line 2387)
Jul 19 23:09:02
On Mon, Jul 20, 2009 at 12:01:17PM +0200, Sjoerd Hardeman wrote:
Hi list,
Does anybody know if it is possible to use pppd in a vserver? I am
currently trying to set up a pptpd vpn server inside a vserver
environment, but it fails on
Jul 19 23:09:02 vserver pppd[18802]: ioctl
Tzafrir Cohen schreef:
On Mon, Jul 20, 2009 at 12:01:17PM +0200, Sjoerd Hardeman wrote:
Hi list,
Does anybody know if it is possible to use pppd in a vserver? I am
currently trying to set up a pptpd vpn server inside a vserver
environment, but it fails on
Jul 19 23:09:02 vserver pppd[18802
2009/3/16 Umarzuki Mochlis umarz...@gmail.com:
Frankly, I don't really know how to answer that other than giving you the
full dialing message
What was the command you typed to get that message?
PS I am subscrubed, you don't need to email me, just the list is fine.
Adrian
--
24x7x365 !=
2009/3/16 Adrian Levi adrian.l...@gmail.com
2009/3/16 Umarzuki Mochlis umarz...@gmail.com:
Frankly, I don't really know how to answer that other than giving you the
full dialing message
What was the command you typed to get that message?
PS I am subscrubed, you don't need to email me,
be flaky.
From long ago, when I had a dialup connection, I remember the solution
to this:
chmod +s /usr/sbin/pppd(as root)
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
-- Sending:
ATZ
ATZ
OK
-- Sending:
AT+CGDCONT?
AT+CGDCONT?
+CGDCONT:
1,IP,my3g,0.0.0.0,0,0
OK
-- Modem
initialized.
-- Sending:
ATDT*99#
-- Waiting for
carrier.
ATDT*99#
CONNECT
-- Carrier detected. Starting PPP
immediately.
-- Starting pppd at Sun Mar 15 19:24:44
2009
-- Warning
.
-- Starting pppd at Sun Mar 15 19:24:44
2009
-- Warning: Could not modify /etc/ppp/pap-secrets: Permission
denied
-- -- PAP (Password Authentication Protocol) may be
flaky.
-- Warning: Could not modify /etc/ppp/chap-secrets: Permission
denied
-- -- CHAP (Challenge Handshake) may be
flaky
:
AT+CGDCONT?
AT+CGDCONT?
+CGDCONT:
1,IP,my3g,0.0.0.0,0,0
OK
-- Modem
initialized.
-- Sending:
ATDT*99#
-- Waiting for
carrier.
ATDT*99#
CONNECT
-- Carrier detected. Starting PPP immediately.
-- Starting pppd at Mon Mar 16 03:22:31 2009
-- Warning: Could not modify /etc/ppp/pap-secrets: Permission
Sometimes, pppd hung up after awhile though on Ubuntu it retries endlessly.
It seems that /dev/ttyUSB0 (the modem) suddenly disappeared. I wonder what
could've caused it. Can somebody guide me on tackling this problem?
-- Connect time 61.2 minutes.
-- Disconnecting at Mon Mar 2 19:11:12 2009
Hola compañeros.
Yo normalmente lanzo las VPN´s que necesito desde CLI (pppd), pero he
pensado ya que tendo KDE ¿por qué no aprovecharlo?.
He instalado kvpnc, lo he configurado y todo parece que va bien, conecto mi
VPN, agrego rutas estáticas... una manravilla.
El problema viene al intentar
6 01:55:32 tango pppd[31832]: sent [CCP ConfReq id=0x2]
*Oct 6 01:55:32 tango pppd[31832]: rcvd [LCP TermReq id=0x6
~LN\327\000\315t\000\000\002\346]*
Oct 6 01:55:32 tango pppd[31832]: LCP terminated by peer
(~LNM-W^@[EMAIL PROTECTED]@^BM-f)
Oct 6 01:55:32 tango pppd
Dnia 6-09-2007 o godz. 21:08 Piotr Konieczny napisał(a):
On Thu, 6 Sep 2007, Arkadiusz Krysiak wrote:
Problem w tym że to konfigurowałem. niestety totalny olew jeśli chodzi o
sygnał dzwonienia.
Już z lekka zgłupłem.
czy jest jakaś opcja wymuszająca by mgetty podniósł słuchawkę?
-n -
Dnia 5-09-2007 o godz. 9:46 Piotr Konieczny napisał(a):
On Tue, 4 Sep 2007, Arkadiusz Krysiak wrote:
czy ktoś pamięta jak toto się konfiguruje?
jeśli tak to mam pytankNie wiem co robię źle ale nie odbiera mi połączeń
przychodzących.
Jak go zmusić do odebrania połączenia przychodzącego.
On Thu, 6 Sep 2007, Arkadiusz Krysiak wrote:
Problem w tym że to konfigurowałem. niestety totalny olew jeśli chodzi o
sygnał dzwonienia.
Już z lekka zgłupłem.
czy jest jakaś opcja wymuszająca by mgetty podniósł słuchawkę?
-n - liczba dzwonków po ilu ma podnieść. Poza tym spróbuj zmusić
go do
On Tue, 4 Sep 2007, Arkadiusz Krysiak wrote:
czy ktoś pamięta jak toto się konfiguruje?
jeśli tak to mam pytankNie wiem co robię źle ale nie odbiera mi połączeń
przychodzących.
Jak go zmusić do odebrania połączenia przychodzącego.
Nie reaguje na rington.
gdzie mu ustawić coby zaczął?
Hmmm...
czy ktoś pamięta jak toto się konfiguruje?
jeśli tak to mam pytankNie wiem co robię źle ale nie odbiera mi połączeń
przychodzących.
Jak go zmusić do odebrania połączenia przychodzącego.
Nie reaguje na rington.
gdzie mu ustawić coby zaczął?
Dwa
Witam
proboje uruchomic polaczenie via gprs mam gotowe skrypty do modemu pod
linuxa i problem jest taki
na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi
blad
pppd call orange-connect-chat
pppd: In file /etc/ppp/peers/orange-connect-chat: unrecognized option 'exec
On Mon, Dec 11, 2006 at 11:56:10AM +0100, Albert Czarnecki wrote:
Witam
proboje uruchomic polaczenie via gprs mam gotowe skrypty do modemu pod
linuxa i problem jest taki
na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi
blad
pppd call orange-connect-chat
pppd
Kamil Jońca napisał(a):
On Mon, Dec 11, 2006 at 11:56:10AM +0100, Albert Czarnecki wrote:
Witam
proboje uruchomic polaczenie via gprs mam gotowe skrypty do modemu pod
linuxa i problem jest taki
na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi
blad
pppd call
On Mon, Dec 11, 2006 at 12:28:12PM +0100, Albert Czarnecki wrote:
[...]
Tylko ze testuje to rowniez na laptopie gdzie mam sida i tam nie wyrzuca
takiego bledu, popbralem te skrypty od producenta modemu takze
niepowinno byc z nimi zadnych problemow ale dziwne ze na sidzie idzie a
na sargu
Kamil Jońca napisał(a):
On Mon, Dec 11, 2006 at 12:28:12PM +0100, Albert Czarnecki wrote:
[...]
Tylko ze testuje to rowniez na laptopie gdzie mam sida i tam nie wyrzuca
takiego bledu, popbralem te skrypty od producenta modemu takze
niepowinno byc z nimi zadnych problemow ale dziwne ze na
niego pobierane sa opcje i chyba go skrypt
wywlouje:) tyle ze jak narazie to nie rozpoznaje tej opcji exec
ale w pierwszym mailu napisałeś
===
na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi
blad
pppd call orange-connect-chat
pppd: In file /etc
.
KJ
Jest plik orange i z niego pobierane sa opcje i chyba go skrypt
wywlouje:) tyle ze jak narazie to nie rozpoznaje tej opcji exec
ale w pierwszym mailu napisałeś
===
na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi
blad
Could somebody point me in the right direction to determine why I get numerous
errors with pppd ie
Unsupported protocol 0x1 received
in my syslog? I'm running pppd
$ sudo pppd --version
pppd version 2.4.4
thanks, M
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
such that sometimes I have to try half a dozen times before a
connection is established and even then it's really really slow.
Thanks, Michael
Oct 1 20:03:44 manchester-campaigns pppd[5621]: Unsupported protocol
0x1 received
Oct 1 20:03:44 manchester-campaigns pppd[5621]: sent [LCP ProtRej
id=0x61 00 01 00
Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this
is 2.4.4
die Zeile ist es wohl ... google liefert auch schon ein paar Hits zu
Leuten, die aehnliche Probleme haben ...
kann man irgendwie pppd mit version 2.4.3 wieder installieren anstelle 2.4.4?
Habe da in apt-get leider
Hallo Philipp.
Philipp Flesch schrieb:
kann man irgendwie pppd mit version 2.4.3 wieder installieren anstelle
2.4.4?
Habe da in apt-get leider nix gefunden :-(
Auf der Manpage hättest du aber fündig werden sollen.
Möglichkeit 1: apt-get install pppd=2.4.3
Möglichkeit 2: apt-get install -t
Hi all
I am running Debian Sarge (Linux 2.4) on an Intel
Pentium III. It acts as a gateway for our LAN and
connects to the WAN through PPPoE. pppd and rp-pppoe
do the work.
Everything works fine but every other day pppd
would hang. This occurs for seemingly no reason at
intervals of about a day
Dirk Salva wrote:
On Mon, Aug 14, 2006 at 09:06:41AM +0200, Boris Andratzek wrote:
pppd kann beim Angewählt-werden ein Script ausführen. Die Optopn heißt
'connect' (analog dazu auch 'disconnect'). Damit müsste sich doch
eigentlich so ziemlich alles anschubsen lassen??
Hmm. Wenn ich
Anleitungen, die ich bisher gefunden habe, isdnlog. Und der widerum
kann nicht ohne capidrv:-(
Moin Dirk,
pppd kann beim Angewählt-werden ein Script ausführen. Die Optopn heißt
'connect' (analog dazu auch 'disconnect'). Damit müsste sich doch
eigentlich so ziemlich alles anschubsen lassen
1 - 100 of 1527 matches
Mail list logo