I've forgotten how to do this and can't find the proper help section to
figure it out.
In Print QSL labels there are checkbox options for Print QSL Manager Labels,
Print Method Labels, etc. They're checked by default. I can uncheck them
manually each time, but I'd rather have them unchecked
Hello all!
DX4Win 9.0.6.1228 has been working well for some time. Until today. When I
opened it I received some sort of configuration errors (which I
unfortunately didn't write down). Then the only windows to open were the log
and "main" window at the top. No DXCC, no WPX, no packet, no band
I've downloaded the appropriate 7610 .RIG files into the Radios folder and
have tried setting up my 7610 with a direct USB connection to the computer.
But however I try I can't get the 7610 to interface with DX4Win (or N1MM,
either, it's not just DX4Win).
Has anyone who's gotten this to work
: Saturday, July 21, 2018 12:53 PM
To: Joe Stepansky
Cc: DX4WIN@mailman.qth.net
Subject: Re: [Dx4win] Error message
Close the program and check that the file save\country.dat is present. I have
seen multiple reports of this file disappearing. I speculate that this is due
to an overzealous virus
-Original Message-
From: Joe Stepansky [mailto:k...@comcast.net]
Sent: Saturday, July 21, 2018 11:08 AM
To: 'Steve K7AWB'; 'DX4WIN@mailman.qth.net'
Subject: RE: [Dx4win] Error message
I started receiving the same error message this morning. Hadn't seen anything
like it before. My version
I started receiving the same error message this morning. Hadn't seen anything
like it before. My version is 9.0.4.1176. Doesn't seem to want to read ANY of
my log files.
Anyone have an idea?
73, Joe KQ3F
-Original Message-
From: dx4win-boun...@mailman.qth.net
Hello everyone!
I just upgraded to version 9 and have a question about WPX award alerting in
the DX spots window. I set File/Awards/WPX to show ONLY 12 meters as an
award band (I have endorsements for the other bands). But in the DX spots
window, I get red lettered spots for 30 and 17 meters.
(not
vc_redist.x64.exe).
Well, I should have just done it. I downloaded/installed it and all is now
well. Thanks!
73, Joe KQ3F
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Joe
Stepansky
Sent: Saturday, May 20, 2017 10:54 AM
To: dx4win@mailman.qth.net
No rush on this (I've waited this long) but I downloaded Dx4win updater 9.4.
Install seemed to go well, but when I click on the desktop icon I get the
following:
The application was unable to start correctly (0xc07b). Click OK to
close the application.
I checked the Dx4win data updater
Luis,
Change the Report/Action from Submission to Listing. When I do that and
save as a CSV file I get individual prefixes.
73, Joe KQ3F
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Luis Teixeira
Sent: Saturday, July 07,
I've been through Help for 15 minutes and can't find this. In the Award
flags, there's blank, C (confirmed), S (Submitted) and I (???). What does
I mean? And where would I find this in the Help facility? I've looked
where I thought was everywhere, but I'm missing it. Thanks!
73, Joe KQ3F
I recently got around to installing version 8.04, and noticed that I once
again receive WPX band alarms for only those bands I specify. For whatever
reason, that feature stopped working in 8.02 and 8.03, or at least it wasn't
working for me.
Whoever programmed that feature back in, thank
I goofed on a recent LOTW upload but can't seem to get DX4Win 8.03 to
correct it and move on. I did a filtered LOTW Export and unfortunately put
it in my old 8.02 folder rather than the 8.03 folder. I then told DX4Win to
update all flags, thinking I'd done everything correctly.
I didn't. So
Yup, that seems to work. Thanks Mel!
73, Joe KQ3F
-Original Message-
From: Mel [mailto:ve...@videotron.ca]
Sent: Saturday, April 17, 2010 3:40 PM
To: Joe Stepansky
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] LOTW upload question
Clear the upload date as well as the flag.
Joe
I noticed that when I press the F2 key to log a QSL, DX4Win creates a new
outgoing label for the QSO I just confirmed and for which I had originally
sent a QSL (the QSL Date field has a date in it, indicating I've already
printed a label). I've gone through the preferences, and in the F2 Key tab,
I tried finding this in the reflector archives but couldn't. While I REALLY
like version 8, there's something I got working properly in version 7 that
no longer seems to work in version 8.
I have WPX for most bands except 30, 17 and 12 meters. I'd rather not get
alarms for new prefixes on
-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Joe Stepansky
Sent: Friday, November 20, 2009 12:54 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Countries not showing as checked
I just upgraded from version 7 to version 8.02 and have an interesting
problem. Most of my
I just upgraded from version 7 to version 8.02 and have an interesting
problem. Most of my DXCC checked country count converted just fine, EXCEPT
for CW. EIGHTY entities are not counted as checked, merely confirmed
(version 7 had 333 entities checked, version 8 has only 253 checked). Yet
when I
apparently all too
true...DOPE! Apologies to all for the waste of time.
73, Joe KQ3F
_
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Joe Stepansky
Sent: Saturday, November 15, 2008 3:52 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4Win doesn't recognize the rig
I lost my hard drive two weeks ago and am now working with a new machine.
Seems like a good time to do my long awaited upgrade to version 7.
Anyway, I backed up the version 6 files and wonder if I can simply copy a
config file (the one with the CFG extension) over to the new DX7 folder and
For whatever reason, my newly installed DX4Win 7 won't see my rig. I had no
problem with version 6, but I've seemingly tried everything and it won't go.
I'm running this through RigBlaster PRO. All the connections appear to be
fine (nothing changed between the time my old computer went bye-bye
I've been unable to add FJ. I've changed the FJ mapping in FS to end on
12/13/2007. That took. But when I attempted to add FJ (with the help
screen open), I was able to enter the initial mapping, but when I attempt
to add a mapping (as instructed by the Help screen), I get no entry
boxes.
tabs, no matter what I do.
73, Joe KQ3F
At 10:34 PM 12/20/2007 -0500, Joe Stepansky wrote:
I've been unable to add FJ. I've changed the FJ mapping in FS to end on
12/13/2007. That took. But when I attempted to add FJ (with the help
screen open), I was able to enter the initial mapping
-0500, Joe Stepansky wrote:
As further information, I followed Kostas's instructions to the letter,
several times. I've now updated DX4Win to Expert mode, though Help notes
I only need Advanced mode. I filled out everything in the Details tab. I
continue to get NO data entry boxes either
: Joe Stepansky [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Saturday, March 10, 2007 17:42
Subject: [Dx4win] Search for unconfirmed prefixes
I always work some new prefixes in DX contests. Right now it looks as
though I have to go through the log manually, keeping an eye on the
prefix window
I'm still running version 6.03 (I do mean to upgrade) and have noticed
something strange. It's happened with other spots but I could never
remember the station callsign. But now it's happening with XF4DL.
When I get a spot for, say, 30 meters, DX4Win lists the spot in the spot
window (for
I'm still exploring DX4WIN full capabilities (so far, WOW), and have a QSL
printing question.
I'd like to make a custom label to print on my existing QSLs. I understand
the basics of creating the custom label, but wonder if there's a way to
increase the distance between each QSO on a label,
27 matches
Mail list logo