Installed the new country file into my program. I am coming up with one less
country worked for the mixed total. Suggestions?
Also what should North and South Cook prefix be? It is still coming up as
ZK/N, ZK/S.
73
john-n4dsp
Anyone familiar with the parameter settings for dx4win and the Orion II? I have
spent an hour searching the archives to no avail. Need some type of search
engine.
73
john-n4dsp
From [EMAIL PROTECTED] Thu Aug 31 13:01:39 2006
From: [EMAIL PROTECTED] (ON4AOI)
Date: Thu Aug 31 13:02:41 2006
dx4win is being
run in Real Time. Consequently this will lead to logging errors. Anyone have
any ideas what may be causing this crossover? This happens on every spot
which crosses the cluster.
73
john-n4dsp
on this reflector. There is a glitch in the
program itself.
john-n4dsp
--
I would rather have a German division in front of me than
.
Does that help? Anyone out there have this problem running dx4win and the
Orion II?
Three weeks and counting with this issue.
73
john-n4dsp
- Original Message -
From: KR4DA [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Cc: n4dsp [EMAIL PROTECTED]
Sent: Sunday, November 12, 2006 12:42 PM
-
From: Scott Neader KA9FOX [EMAIL PROTECTED]
To: n4dsp [EMAIL PROTECTED]
Cc: KR4DA [EMAIL PROTECTED]; dx4win@mailman.qth.net
Sent: Sunday, November 12, 2006 1:46 PM
Subject: Re: [Dx4win] Where is the Tech Support?
When you turn the radio on, you still have to the Radio Menu and choose
Start
pertaining to this issue.
john-n4dsp
- Original Message -
From: n4dsp [EMAIL PROTECTED]
To: Scott Neader KA9FOX [EMAIL PROTECTED]
Cc: dx4win@mailman.qth.net
Sent: Sunday, November 12, 2006 2:03 PM
Subject: Re: [Dx4win] Where is the Tech Support?
Thanks for the email Scott,
The radio
must continually watch
what the band and mode info is before I hit the enter key
to log the qso. I have had many band and mode errors in
my logbook due to this and I should not have to watch
it. No John, there is a bug in the program.
Thanks for the reply there OB.
73
john-n4dsp
and it really
slows me down due to this and then the incorrect band and mode data in the
qso window. That should not happen and it is either a problem with dx4win or
it is the Orion and no one wants to take responsibility for it!
73 Marc
john-n4dsp
- Original Message -
From: Marc
Thanks to everyone who responded trying to solve the band mode data issue I
am having. Hopefully this can
be resolved soon by Paul.
73
john-n4dsp
me a beta version since I do not want
to wait till dayton to have this fix and have not heard from Paul since. Go
figure.
73
john-n4dsp
- Original Message -
From: KR4DA [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Cc: [EMAIL PROTECTED]
Sent: Saturday, November 18, 2006 1:22 PM
Subject
10 months and I also have to work
especially at the end of the year so I can pay for another update
to fix what is broken.
By the way Guy, Merry Christmas and be careful not to buy any
toys which do not work correctly.
73
john-n4dsp
Some people need to work also !!!
And certainly @ the end
Is the dx4win users guide version 6.03 an abridged manual?
At one time I had an earlier version which seemed to me was more comprehensive.
If so where can I download that one.
73
john-n4dsp
Thanks to all who responded with the info.
73
john-n4dsp
From [EMAIL PROTECTED] Wed Apr 4 10:13:03 2007
From: [EMAIL PROTECTED] (George)
Date: Wed Apr 4 10:16:44 2007
Subject: [Dx4win] RADIO_FILES???
Message-ID: [EMAIL PROTECTED]
Can anyone tell me what the data in the radio files means
My system suddenly shut down and the program created a backup log. Doing a
search for it shows it in the Save Directory but there is no icon there. To
open it I have to do a search in WindowsXP Pro and once the search shows the
icon I can open it by double clicking. Anyone have any ideas why
I have 1500 qso's to print labels for and want to print these alphabetically
via prefix so I do not have to do buro sorting later. I cannot find a filter
selection for this in my help manual. Any help in this regard?
tnx
john
callsign
zones. I live in North Carolina and I use the k8smc in michigan and the w4to
node in tennessee and I receive the same spots on the both of them without
setting up a filter verifying the nodes are all connected.
john-n4dsp
- Original Message -
From: Alan Zack [EMAIL PROTECTED
Presently running 7.02 and I have 6.04 in another directory. How can I
delete 6.04 without harming 7.02? I went into the control panel in WindowsXP
and it is not showing 6.04 but it does show 7.02.
thank you
john-n4dsp
Thanks to Henrik,OZ6TL I now have a copy 7.02.
john-n4dsp
- Original Message -
From: n4dsp [EMAIL PROTECTED]
To: dx4win dx4win@mailman.qth.net
Sent: Saturday, August 11, 2007 8:21 AM
Subject: [Dx4win] Latest Users Guide?
Presently the latest Users Guide I have is 6.03 and I am
not have the QSL information for: N4DSP
I am not sure why I keep this message with any call I type into the qso
where I should be getting all qsl information. Anyone have a clue?
john-n4dsp
- Original Message -
From: ON4AOI [EMAIL PROTECTED]
John,
Put http://www.qrz.com/ in the qsl manager lookup = second line
That is what I did and now it is working. The manual was incorrect
on this one. Thank You.
john-n4dsp
From [EMAIL PROTECTED] Sun Aug 12 09:17:13 2007
From
windows. I have not changed anything today to change any parameters.
john-n4dsp
areas
of the dx4win qso window but qth like city and state is not tranferred over.
Is this normal?
Also there is no transfer on any sort for dx stations when clicking on the
Update QSO button. Is this normal?
By the way I am using version 7.02
Thanks
john-n4dsp
I followed the process exactly to add FJ to the country database and Saved
and Exit and it still does not appear in my country database. I am in the
Expert Level.
john
Anyone have the latest data for setting up dx4win to run the FT-2000?
john-n4dsp
From [EMAIL PROTECTED] Sun Mar 18 18:52:47 2007
From: [EMAIL PROTECTED] (=?iso-8859-1?Q?Harald_Kj=F8de?=)
Date: Sun Mar 18 18:55:01 2007
Subject: [Dx4win] Vista
Message-ID: [EMAIL PROTECTED]
A friend of mine got
do I get this to quit printing this commercial?
Thank You.
john-n4dsp
Thank You Pete.
73
john-n4dsp
It's a quirk. If you edit the label definition and OK out, then print or
preview QSL labels, there will be no commercial. But if you reopen the
label database the checkmark is reinstated. I guess the idea is to have
it default to Commercial = Y.
73
How do I turn this buro method off. Each time I print some labels one is
wasted printing Method=Buro
john-n4dsp
a quarter of
the screens window. How can I prevent this from happening?
thank you.
john-n4dsp
I am not referring to the sunrise/sunset window but there is a window which
lists the countries on the antipode or within the grayzone at a given time.
Anyone know how to activate the window and what it is called?
john
I am not referring to the sunrise/sunset window but there is a window which
shows the antipode or gray zone countries and I am unable to bring that
window up. Can someone help me?
tnx
john
Couple of months ago I saw a post for a rigfile for the Elecraft K3. What is
everyone using these days?
tnx
john-n4dsp
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
Just purchased Version 8 and would like to uninstall a much earlier version.
Could not find an 'uninstall' file in the program. What is the easiest and
safest way to uninstall?
john n4dsp
__
DX4WIN mailing list
Home: http
Less than a week ago I downloaded version 8.04 and installed the license.
Excellent service by Paul. Once I placed the order on sunday I had the key
within 2 hours!
My interface cable is the Elecraft KUSB to Serial with FTDI chipset. Downloaded
and installed the cdm driver. There are a couple
the same in the Config Menu of the K3.
Thanks for your help.
73
john-n4dsp
I addition to what Bud has suggested, right click on the Computer icon,
Select Properties, click on Device Manager, Open Universal Serial
Bus controllers, select *each* USB Root Hub and Generic USB Hub
entry, select
asking if they could send me my
log and Norm Fusaro did just that. This morning I received the file N4DSP LoTW
ADI. What would be the correct process of replacing my current inaccurate log
with this one?
Thank You
john-n4dsp
__
DX4WIN
Thanks Rick!
Certainly glad you brought this to my attention.
73
john
On Thu, May 10, 2012 at 8:39 AM, n4dsp n4...@triad.rr.com wrote:
Hello.
Dx4win running for over ten years now. In the beginning I made the
mistake
of replacing my country file instead of merging and it threw my dxcc
DX4WIN is always up and running and connected to the local packet cluster. When
I turn on the K3 the qso window showing the Date, Time, Mode, and Band does not
update but shows the last qso that is in the log. Clicking on Radio/Start Radio
does not change the qso window info nor do current
Thanks!
It sounds like you are forgetting to type F9, to put the log into
real time add mode.
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Since I only operate qrp would like to change the default of the qrp flag from
N to Y on the qso window. What file in the program on the C drive is this
located?
thanks
john.
__
DX4WIN mailing list
Home:
What cd is the most popular for call look-up with DX4WIN?
john
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by:
When dx4win opens how are the packet and dx spots windows disabled?
thanks
john
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This
In addition to uploading my log to LOTW there is another site called Club Log
which requires one to upload their log in adif format. How can this be done in
dx4win?
thanks
john
__
DX4WIN mailing list
Home:
Hello.
Anyone try or a using the qrz xml database subscription work with dx4win? Here
is what their info says..
XML Logbook Data - Direct access to our widely acclaimed XML Data Port by
popular logging programs like Ham Radio Deluxe, Amateur Contact Log,
Win-EQF,LOGic7, and ProLog2K, just to
Hello Peter.
Had the same request ten years ago and still waiting!
john
On 8/25/2012 12:53 PM, Peter wrote:
Hi
Is there a way to auto connect the packet network via TCP/IP when
starting the program?
Run 8.05 here
Peter
PC2A
__
Have logs from two other logging programs in adif format. Can they be
imported into the
dx4win log according to date these qso's took place?
thank you
john/n4dsp
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo
/15/2013 7:10 AM, n4dsp wrote:
Radio/Start I receive an error message i.e. BadLD-Specified comport
doesn't exist. Radio error #1.
Serial Port specified for radio is in use by another device.
Select a different port for the radio or the other device.
But going to device manager/Ports I find
Enterprise.
Thanks for the other advice.
Merry Christmas
john
On 12/17/2013 10:00 AM, Jim Reisert AD1C wrote:
On Tue, Dec 17, 2013 at 4:04 AM, n4dsp n4...@triad.rr.com wrote:
Downloaded and installed the USB driver for the Kenwood TS 590S and was
assigned to COM 3.
This morning I found the USB
To A Nigerian Prince About Your Health Care, Press '1' Now
*From:* n4dsp n4...@triad.rr.com
*To:* Jim Reisert AD1C jjreis...@alum.mit.edu
*Cc:* dx4win dx4win@mailman.qth.net
*Sent:* Tuesday, December 17, 2013 11:59 AM
*Subject
Kostas,
I do not disconnect the USB Cable.
john
On 12/18/2013 2:34 PM, Kostas SV1DPI wrote:
If I have understand well, you have a kenwood 590 connected via the
usb cable. This connection creates a virtual com (there is not a real
com port). The virtual com port is either com 3 and either com
?
DX4WIN is still my logging program.
If time constraints are the problem for DX4WIN updates perhaps it's time
to sell the company
and allow someone to further develop this great classic dx logging program.
john/n4dsp
__
DX4WIN mailing list
gone the way of the dinosaur by now.
Once again if Paul doesn't want to do some revisions then sell the company
to someone who would love to.
Regards,
john/n4dsp
john.
On 1/4/2014 2:21 PM, Erkki Heikkinen wrote:
I feel I have to express a different view.
I have been using DX4Win since V1.6
LOL. And TenTec is coming out with an Orion 3
and Elecraft with a K4.
73
john
On 1/4/2014 7:49 PM, PY2YP wrote:
I feel that Paul will surprise us with a new version very soon.
73 DX de PY2YP - Cesar
__
DX4WIN mailing list
Home:
idea's on this matter instead of
flaming would be nice.
john
On 1/4/2014 9:23 PM, WA7AA wrote:
On 04.01.2014 11:46, n4dsp wrote:
Why is it and it's not just with this reflector when post's come out
like mine
expressing dissatisfaction with DX4WIN and expecting and willing to pay
for revisions
the same with DX4WIN?
DX4WIN is still my logging program.
If time constraints are the problem for DX4WIN updates perhaps it's time
to sell the company
and allow someone to further develop this great classic dx logging program.
john/n4dsp
On 1/5/2014 12:23 AM, R.T.Liddy wrote:
Constructive
program.
GL/73/HNY Bob K8BL
From: n4dsp n4...@triad.rr.com
To: dx4win@mailman.qth.net
Sent: Saturday, January 4, 2014 9:57 PM
Subject: Re: [Dx4win] LOTW and DX4WIN
Zoran,
You ask me to to give you and other's on this reflector some idea on what
exactly
to
develop. But you and Bob need to spend some time at the local Senior
Citizens Center and play some cards with these folks and work a day or
two dispensing out food for the homeless rather than asking N4DSP for a
Santy Claus Christmas Wish List for DX4WIN.
On 1/5/2014 4:27 AM, Art - W6KY wrote
Paul should put a link on the DX4WIN website for owner's to contribute
their idea's to the Wish List.
I sent an email to Paul 2-3 weeks ago with a suggestion and did not
receive a response so I resorted
to the DX4WIN Reflector to BE HEARD.
Requesting some attention from the owner's of
making cheap
shots - grow up.
BTW, when was the last time you won a Contest and/or had your pic in QST?
N4DSP - Shea, John E
7170 Johns Pointe Court
Liberty, NC 27298
73 Happy New Year to You and Your Family,Bob K8BL
LOL.
Hey Bob,
Can't we all just get along!
LOL
On 1/5/2014 1:59 PM, R.T.Liddy wrote:
Art,
This gentleman appears to have issues. It's best that
he be ignored.
73/HNY,Bob K8BL
*From:* n4dsp n4...@triad.rr.com
Art, Bob, and Zoran,
what was originally an excellent post addressing the need to end the
4 year lapse in updates to the excellent but stagnated DX4WIN program
has been thrown off course by you three.
Another thread has appeared by Hams that are in favor and discussing in
a civil manner the
I agree Kostas.
After 4 years we NOW know , thanks to Paul, there will be NO LOTW
Updates to DX4WIN and additional rig files.
Would like to make a positive suggestion for Paul while he is still
listeningOn the DX4WIN Home Page provide a
Link that allows user's to see what is up and
to DX4WIN but it's over. Some will be
happy there will no longer see any more posts from n4dsp! LOL. Hate to see
such a great dx logging program coming to it's end and it's troublesome.
Made the ARRL Honor Roll with this program from my first contact to #334.
Paul,SELL THE COMPANY.
Respectfully,
john
63 matches
Mail list logo