I agree with George about the new Palstar HF-Auto. but it has stepper
motors and costs $1500 also not the same class of tuner plus it's a legal
limit tuner.
73,
Fred/N0AZZ
K3 Ser #'s 6730/5299--KX3 # 2573--K2/100--KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From:
I wish it were than easy ;-) I can hear it fine and get a good bearing here at home
with 4x9 element yagis, but I can't hear the noise at all with the dipole or vertical
in the car. I just have to hope that the intermittent noise is on when I drive out
to the spots along the line where the
I am the builder and non-smoking sole owner of K2 s/n 3070 (rev B) with
these options: KPA100 (also provides RS-232 computer interface), KSB2,
KNB2, K160RX, KAT100 external autotuner with crossover cable and Yaesu
MD-100A8X desk mic.
This rig has provided years of faithful service without a
There used to be some sites that described how to put a KPA100 and KAT100
in a remote EC2 enclosure for the K2, but I can't find these anymore. Can
anyone point me to the info?
Thanks 73,
--Andrew, NV1B
..
__
Elecraft mailing list
Home:
Call me crazy, but after many QRP contacts, both DX and US, I'm thinking I
could be happy with just a KX3 instead of my K2/100. Is that just nutty
thinking? Maybe just get a HFpacker amp for the occasional QRO boost. The SDR
aspects of the KX3 are really appealing to me.
Signed,
Can't have it
I haven't used my KX3 in a while and updated the firmware. In CW mode, I
notice there is substantial receiver noise at low volume with headphones.
The noise appears to be more active when a received CW signal is present.
Also, activating the attenuator also increases the noise and distortion.
The
While tuning around the WPX contest at my cabin, my KX3 spontaneously shut
down two times this morning. I'm running on battery and show 12.4 volts. BAT
MIN is set for 10.0.
Jim
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Spontanious-Shutdown-tp7574189.html
Sent
I am thinking of getting a K3. I notice that a computer is necessary for
several things. Can I use a Mac (iMAC) computer?
Thanks,
Dick, N5XRD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
We provide Mac versions of our firmware load utilities, for recent versions
of Mac OS/X.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard W Hemingway
Sent: Saturday, May 25, 2013 8:34 AM
To:
Dick,
The iMac will work just fine. I've had my K3/100 tied to a MacBook Air for
several years - no problems at all. With this setup I run the Elecraft Utility
programs for the K3 and my P3, in addition to using MacLoggerDX for logging
purposes.
Jim / W6JHB
Folsom, CA
On Saturday, May
Actually, a computer is no more necessary with a K3 than with any other
rig. Except for firmware updates and if you want to use a soundcard for
the various digi/rtty modes or run a logging program with rig control,
there is no need for a computer at all, unless you want to.
I run a Mac Mini
Thanks to everyone for answering so quickly. Boy that ws fast. Yes I do have
Parallels and Window 7 but don't have them on my computer now. I guess that I
better put them back on.
Also, I currently have an ICOM 7600. I have read on their list that they are
having some problems I don't
I have just read some of the answers f romthose of you that have used the
Mac without the Parallels. I will ry that before I loas the others. Thanks.
Dick, N5XRD
__
Elecraft mailing list
Home:
Also, Mac users should be sure to take a look at RUMLog and RUMPed free
Mac logging and contest logging software. I use both and am well satisfied.
73,
Scott, N9AA
On 5/25/13 12:01 PM, Jim Bennett wrote:
Dick,
The iMac will work just fine. I've had my K3/100 tied to a MacBook Air for
I agree I also use RUMLog and Fldigi from the Mac with my KX3. The main thing
that seems to be lacking on the Mac is good working SDR software. Otherwise I
think I am good not running Windows...
Jeff, K7GDE
On May 25, 2013, at 9:19 AM, Scott Manthe scott.man...@gmail.com wrote:
Also, Mac
The Mac versions of the K3 and P3 utilities work well for me on
my now somewhat old MacBook Pro. I don't think there is a Mac
version of the utility for the 2 meter option yet.
Cheers - Bill, AE6JV
On 5/25/13 at 8:34 AM, rhemi...@sbcglobal.net (Richard W
Hemingway) wrote:
I am thinking of
Macs all the way here - RUMlog, RUMped, RUMlog2Go work perfectly for me and
I've never found a bug that Tom didn't fix right away. And finding bugs is a
rare occurrence! He's a good developer. Using RUMped as I speak on the CQ WW
WPX CW contest….
Elecraft utilities for Macs also work well.
A little help, please.
I am using a MacBook Pro for shack computer. I am getting the K3 and KPA 500
firmware updates with no problem using this computer.
However, the KAT 500 tuner will not recognize the MAC for the initial utility
download. I am using the SerialPort 2 for K3 firmware
Hi Steve,
It may be that USB/Serial adapter you are using for the K3 and KPA500 are the
older KUSB that uses the Prolific driver. The adapter that ships with the
KAT500 (KXUSB) requires the FTDI driver. Try installing the FTDI driver on your
Mac.
I have the KPA500 linked with the K3 and the KAT500 and would like to use the
KPA500 with my backup rig a TEN TEC Jupiter. Is there any issue with
switching the RF and TX relay line (or leaving it connected to the Jupiter)
and leaving the AUX cable connected to the K3? Assume that only one rig is
Somehow I broke the connector J92. The center pin broke flush with the
board while I was inserting the coax connector.
What is my next move?
I thought that line was needed only if I want to use the external BNC
connector for receive only on the sub-receiver. However, I seem to have
no signal in
On Sat, May 25, 2013 at 10:54 AM, Brian F. Wruble bwru...@gmail.com wrote:
Somehow I broke the connector J92. The center pin broke flush with the
board while I was inserting the coax connector.
What is my next move?
I thought that line was needed only if I want to use the external BNC
On page 43 of K1 manual Q6 it calls out for a C5739...mine is a C2166 is this
ok ??? Or do I need a C5739 the errata is a bit confusing to a simpleton...
72/73/Scotty/NUØS
__
Elecraft mailing list
Home:
Scotty,
Install the 2SC2166 at Q6.
I am not certain which manual revision you are using, but at the top
left of the K1 manual Rev I, you should see the following:
TO-220 package transistors Q6 and Q7 look identical, but are
different types. Locate the 2SC1969 (labeled C1969), Q7, and set it
Hi guys,
I am in a fight with my just assembled K3. I have gone through all the
steps, and everything worked. However, I could not get the sub-receiver to
receive anything --- just noise.
So I figured I would put that aside for awhile and try transmitting into a
dummy load. I had already run
Is your transmitter in tx test mode?
Jim WB8AZP
Sent from my iPad
On May 25, 2013, at 5:58 PM, Brian F. Wruble bwru...@gmail.com wrote:
Hi guys,
I am in a fight with my just assembled K3. I have gone through all the
steps, and everything worked. However, I could not get the sub-receiver
No, unfortunately.
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278
On Sat, May 25, 2013 at 6:02 PM, James kvochick jameskvoch...@me.comwrote:
Brian,
Check your com port settings - the K3 normally connects at 38400 bps.
You indicate 4800 bps, so perhaps the computer port speed is
'throttling' the data. If you are using a USB to serial adapter, a low
speed like that can create errors in the data stream because the
responses are
I received Fred's KX3 book today from Lulu.
First impression: EXCELLENT!!!
Joe KK5NA
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady, Fred
Sent: Thursday, May 16, 2013 6:07 PM
To: Elecraft Reflector
Subject:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3. Is there a solution that would not require unplugging
the Signalink sound card?
73,
Ron, K5HM
k5hm@gmail.com
www.qrz.com/db/k5hm
__
Steve,
The KX3 will give you about the same output as a K2/10, and with the
KXPA3 amp and tuner soon to be available, you can have a 100 watt
station if you want, but it will also drive your HFpacker amp.
The KX3 offers several advantages over the K2 (IMHO).
All modes - CW, SSB, Data Modes
Hello Brian,
Be sure that you run the auxiliary KSYN3 procedure, as specified in the
Preparing for Operation section of the manual (pg. 43 of my manual). If
you don't, you'll experience just what you describe. You can probably
guess how I happen to know that ;-)
73, Dale
WA8SRA
Somehow I
What Don is saying is true. My manual, page 58 shows the factory default as
4800 b. Try resetting it to 38400 using the “config” menu.
You will have to also do the same with your computer. Then try reloading the
software. Anything you have saved with your present setup
could be corrupted
Ron,
I have looked at the SignaLink USB information and see *no* connection
for the KEYOUT line. Yes, the SignaLink needs to be connected to the
Line Out on the K3, but that is different than KEYOUT (PTT to the
amplifier).
73,
Don W3FPR
On 5/25/2013 6:27 PM, K5HM wrote:
The Signalink USB
That did it! I completely skipped that step. Thank you!
Now I have to solve an XMIT problem, and all will be well with the world.
73, Brian W3BW
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman
OK, I will head in this direction. I am using the USB to 232 cable from
Elecraft, and it was working fine at 4800.
I will report results. Thanks for your help.
Brian
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57,
OK, I am at 38,400, I reinstalled the utility software. I reloaded the
latest firmware. There is no change --- same result when I try to
calibrate XMTR gain.
OS Version 6.1 Build 7601 Windows 7/Windows Server 2008 R2
K3 MCU revision 04.67. RS-232 speed 4800 bit/s.
Starting 5 watt calibration
I have all those and can confirm the Signalink does not use key out.
Gerald
On May 25, 2013 5:28 PM, K5HM k5hm@gmail.com wrote:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3. Is there a solution that would not require unplugging
the Signalink
Agreed Gary,
I too would be interested in an internal 10M pre-amp (or an internal combo
6-10M pre-amp).
I already have the PR6 but like you say it (in stock form) protrudes so far
out behind the rig that it almost impossible to use for portable work.
Mounting it internally is the way to go and I
This sounds like a lack of creative thinking. How about using two 90 degree
BNC elbows on the back of the radio and a couple of BNC jumpers. You can
put the preamp anywhere... even in the next room is that is your fancy.
Also, you might try one of the 50+ preamps that are already available by a
The K3 Utility finds the K3's RS-232 speed by trying them all. Config save is
check summed and the RS-232 speed doesn't matter except that it takes longer at
slower speeds.
Dick, K6KR
Dick
On May 25, 2013, at 16:00, Ed edw...@sisqtel.net wrote:
What Don is saying is true. My manual, page
The original poster mentioned those of us who operate portable. Running
cables to the next room does not make that any simpler.
wunder
K6WRU
On May 25, 2013, at 5:13 PM, Dr. William J. Schmidt, II wrote:
This sounds like a lack of creative thinking. How about using two 90 degree
BNC elbows
The weekly Elecraft SSB net will meet tomorrow (5/26/13) at 1800Z on 14.3035
MHz +/- QRM. I will be the net control from western Oregon. See you there.
73,
Phil, NS7P
__
Elecraft mailing list
Home:
Brian
There are two other things you can check. On the K3, when pressing the “Xmit”
button,
the one above the volume control, does the red “Xmit” LED light? It is located
above the
“Phones” jack. If not look over on the extreme right of the display. There is
an arrow
that indicates
Thanks. That is not the answer, but please keep thinking!
It worked once, and I have obviously set something wrong.
Brian
--
70 is the new 40.
Brian F. Wruble, C.F.A.
1107 Key Plaza, PMB 447 Key West, FL 33040
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
I don't wish to flog a dead horse any further, however, choice is something
it seems everyone on this list is after.
So what if a K3 needs to NOT have a 2M transverter to fit a combo
pre-amp?there are many K3's in the world not fitted with 2M. This is a
choice made by the original owner I
Received Fred's book, The Elecraft KX3, yesterday form Lulu. Very nice. My
first impression, agree with KK5NA: EXCELLENT! Already cleared up a number of
questions I had about data modes.
Alan AA5XQ
__
Elecraft mailing list
Home:
Brian
What does the display show when you manipulate the power control knob.
It must have the green LED lit indicating “PWR” above the knob. If I
remember correctly the calibration process will set the output to “0” after
calibration.
So, I will continue to want an internal pre-amp and it does not need
to be for 6M as I don't operate there either. This is MY choice and
does not hold sway with the masses but it is my choice after all.
I agree that an internal preamp (or premps) would be ideal. However,
in addition to the
I noticed on Carl N4PY's website that his rig control software allows a K2
to act as a sub-receiver for the K3. The K2 functions through VFO B on the
K3. I have a K3 without the sub-receiver and a K2. I would be interested
if anyone has implemented this combination and what their
Hi Joe,
Gee...Shlet's not let that technical inconvenience reduce in any
way my hope for a cure to my sometimes demented desires:-)
Of course you are quite correct Joe. Point taken mate.
73
Gary
On 26 May 2013 12:06, Joe Subich, W4TV li...@subich.com wrote:
So, I will continue
72/73/Scotty/NUØS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
72/73/Scotty/NUØS
Original Message
Subject: Re: [Elecraft] K1 #3206
From: Scotty Long n...@hotmail.com
To: d...@w3fpr.com
CC:
Very cool Don K1-4 #3206 is on line/alive and well first short QSO to TX with
W5GXV on 30m... the noise blanker and internal tuner are ready for
That control acts normally. I can set the power from 0 to 100+ watts, and
the green light is on. After the calibration run, power = 0.0.briefly
flashes up, and then it goes to where I had the power set before the run
--- 5.0 watts in my case.
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Red light, yes.
Arrow points to VFO A
TX is steady
*Brian F. Wruble, C.F.A.
*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax 305.768.0278
On Sat, May 25, 2013 at 9:04 PM, Ed
let's not let that technical inconvenience reduce in any
way my hope for a cure to my sometimes demented desires:-)
I'm not saying it isn't possible ... takes one additional relay
and two connectors. There are even couple unused control lines
on the KXV3A that could be used to control
Ah Joe,
Thankyou for resurrecting my thought that it IS possible. The issue will
most likely be a lack of quantity that would be sold versus the cost to
manufacture,
I will live in hope...:-)
thanks for the info Joe, much appreciated.
73
Gary
On 26 May 2013 12:45, Joe Subich, W4TV
I got my KX3 book from Fred yesterday... I learned something on every page!
Outstanding work Fred. Thank you!
If you have a KX3... Buy this book! You will really like it!
Non judgement day is near
On May 25, 2013, at 7:36 PM, Alan Watson alan.p.wat...@gmail.com wrote:
Received Fred's book,
I rechecked the Signalinlk cable and connected the PTT to PTT IN on the K3.
Works correctly. It worked before, so I must have been dreaming about where
I had it connected.
Probably senior moment. Thanks to all.
73,
Ron, K5HM
k5hm@gmail.com
www.qrz.com/db/k5hm
This is how I mounted my Pre Amp for 6 mtrs so I would have clearance in the
back,
The Pre Amp does not extend any further than the back of the RS232
connectors when the cable is attached... used 2 standoff's a piece of
aluminum and 2 longer screws
Ed K7WIA
top view
On 14050 kHz at 2200z:
NO8V - John - MI - K3 - 820
AB9V - Mike - IN - K3 - 398
K0DTJ - Brian - CA - K3 - 4113
K9ZTV - Kent - MO - K3 - 21
W0CZ - Ken - ND - K3 - 457
On 7045 kHz 0100z:
K0DTJ - Brian - CA - K3 - 4113
K6PJV - Dale - CA - K3 - 1183
WI6O - John - CA - K1 - 922
Good Evening,
After a week of 70 degree, sunny weather it was hard to go back to
40, with rain and gloom. But there was an hour of sun today so it got
dried out enough for a hike. The paths I thought would be more
overgrown were as used as when I had been hiking them regularly. Lots
of
I don't know about that ... the incremental cost for the KXV3A
vs. KXV3 was minimal. The firmware changes to support two more
control lines should be minimal.
As far as an internal preamp - it should not be significantly more
complex than the PR6. With switching on a KVX3B, an internal
preamp
Wooowhooo! i made the list. i could barely make out the net but was happy
to stumble across it. QTH is Springfield VA and i was only using 5 watts.
Thanks for picking me up. Serial 3958.
Jeff N6SDR
On Fri, May 24, 2013 at 6:10 PM, Phil Shepard ph...@riousa.com wrote:
Last Sunday's net was
Hi Brian,
Try running VCO MD CAL again. I have had problems with this in the past.
Andy VK4KY
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Setup-Failing-tp7574207p7574246.html
Sent from the Elecraft mailing list archive at Nabble.com.
65 matches
Mail list logo
