I just uploaded K3_EZ, a Windows application I've written for the K3
(Apologies to K3EZ!). It provides:
* A set of 5 'memory-like' frequency storage areas per band and mode
* A frequency and mode database, useful for SWL frequencies
* A graphic interface for the K3 RX and TX equalizers with
S/N 00929 /w FW 2.76, 6.0 kHz filter. Confirmed TX on switch from DATA to
AM when VOX on. Getting typical AM carrier output for about 1 second.
Happens from either front panel mode change or PC control (two different
programs).
Happens from DATA to AM and DATAR to AM (I tried all
changing VOX gain did the trick.
It's not 4/1/2009 already is it???
73 allBill N2BC
- Original Message -
From: Greg a...@cablespeed.com
To: Bill Coleman N2BC n...@stny.rr.com; K2MK k...@comcast.net;
jp...@jeffnet.org; Elecraft Reflector elecraft@mailman.qth.net
Sent: Friday, December
There has been much chatter about the K3 EQ lately. I've written a small
Windows application that helps to 'manage' the equalizers. This is a work in
progress, and I'm not much of a programmer. You should take this to mean:
Caveat Emptor!
The application is being used by about 20 people now
FWIW, I've been using N1MM Logger keying via the serial port (and earlier
via parallel port) since 'day 1' of Logger on many different PCs, WIN98 thru
Vista, 'real' serial ports and USB-to-serial ports, on different YaeComWood
rigs, a K2 and now my K3. It works just fine, always has.
The
I've written a Windows utility to help 'manage' the K3 equalizers. It has a
graphic display of the 8 EQ bands in the K3 equalizers, can read and set the
EQs, and allows you to quickly set/save various setups along with relevant
notes entered by you (mic type, gain settings, etc).
The program
Per the Owners Manual Version D, page 51, ESSB mode has it's own TX
equalizer, indicated by TX*EQ when setting the equalizer bands. I've got
ESSB enabled (CONFIG:TX ESSB ON), but there is no * indication in the EQ
setup display (MAIN:TX EQ).
Is this not yet implemented, or did I just not
I would like to be able to GET and SET the individual equalizer settings for
SSB, ESSB, and RX.
Will the MN command be expanded to GET (now SET only), and include the 'sub'
entries for the equalizer bands? Or will the DS command be expanded to
include the B display as well?
Or... am I
I miss dedicated band buttons even though my main rig has been a K2 for the
last couple years. Using the Quick Memories and M1..M4 work quite well
though.
But (you knew this was coming), the very thing that makes the Quick Memory
function handy can also be its downfall. Try as I might to be
After a power off and a radio club meeting (probably not relevant), my K3 is
behaving slightly differently.
The sequence:
Current freq: VFO A 1.870.000 LSB VFO B 1.890.000
press M V
select a null (empty) memory
press M V
BEEP
frequency now VFO A 50.010.000 CWVFO B 50.000.000--- last
Is there a further explanation of the K3 NR anywhere? The manual doesn't say
much. Looking for the meaning / purpose of F1 thru F4 and the 4 levels inside
each.
Thanks!
Bill N2BC
K3 #929, 2 days old and still teaching it's owner.
___
Elecraft
I was setting up some band edge memories (KM5Q's post of 5/10). I goofed and
hit MV instead of VM. Then selected an 'empty' memory position, the main freq
display was - - - -. I hit MV again. The VFO jumps to 49.9940 mHz and
displays ERR PL 1
Seems like the MV routine should test for a
For those of you watching for these Katie-gram arrived this evening for
my Dec 11 K3 order.
Happy Camper, N2BC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Wayne, I'm curious about what seems to be an emphasis on non-powered
speakers in your reply... why?
My op bench was getting overrun with speakers for various rigs. I picked up
an 8 channel stereo line level mixer and now run everything through a single
set of powered PC speakers. The
KPA100 manual, Page 63 - K2/100 Specifications: +200V maximum @ 1 A
- Original Message -
From: Phil Kane [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Cc: Jim Miller [EMAIL PROTECTED]
Sent: Saturday, March 29, 2008 10:15 PM
Subject: Re: [Elecraft] Key Line - My Mistake
It took a sting of posts this morning for the 'light' to come on - my QST
has not arrived yet.
My very first April QST was back in the early 60s. There was an article
about tapering a single wire feedline to concentrate the power going to the
antenna, full of formulas to derive the proper
Looking at the K3 diagram a couple of Kenwood mics... UP/DOWN go to
ground.
73, Bill N2BC
- Original Message -
From: Brett Howard [EMAIL PROTECTED]
To: Fern Rivard [EMAIL PROTECTED]
Cc: Elecraft Reflector elecraft@mailman.qth.net
Sent: Friday, March 14, 2008 8:51 PM
Subject: Re:
Message -
From: Stephen Prior [EMAIL PROTECTED]
To: Bill Coleman N2BC [EMAIL PROTECTED]; elecraft
elecraft@mailman.qth.net
Sent: Wednesday, March 05, 2008 12:42 PM
Subject: Re: [Elecraft] K2 12M odd behavoir, END message
Bill,
I have exactly what you saw. Having reduced freq from above
Bear with me, this is strange K2 / 06254 built last Fall
A few days ago I fixed a problem on my K2 (low output on 15/12/10).
Yesterday I finished a complete alignment and today reinstalled the KPA100.
So... its lashed to a dummy load and I'm stepping through the bands to make
sure the
My, my... Here's what I propose. All you folks that are disappointed that
there may be a change in their K3, please send Lisa an email and ask her to put
your order on hold until the K3 stabilizes.
I would love to get bumped up in the queue. Further more I hope you never get
your K3. Why,
K2 # 6254 Only abt 1W out on 12M, 5W out on 10M. Worked FB when I assembled
it last fall. I've been all over the 12/10M bandpass components with fresh
solder.
I went through TX alignment found 20/17/15/12/10 all improved - but only
ended up with the above power levels for 12/10.
I have
Mic 'standard' - never happen - at least I hope it never happens.
They started out with one pin for audio and could end up with one pin for
everything as more and more 'brains' are moved into the microphone and the
connection to the radio turns into a one-wire serial link. This could give
us
There may have been another article... but the one Jim describes is indeed
QST May 1953 page 58. Logging on an IBM punch-card machine:-)
73, Bill N2BC
- Original Message -
From: Stephen Brandt [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, February 03, 2008 6:50
Just doing some planning for the eventual arrival of my K3.
The KRC2 needs AUXBUS 8R and ground. Where / what on the K3 AUX I/O
connecter is 8R or it's equivalent?
Thanks!
73, Bill N2BC
___
Elecraft mailing list
Post to:
Wilhelm [EMAIL PROTECTED]
To: Bill Coleman N2BC [EMAIL PROTECTED]
Cc: elecraft elecraft@mailman.qth.net
Sent: Wednesday, January 30, 2008 9:48 AM
Subject: Re: [Elecraft] K3: KRC2 interface
Bill,
The KRC2 does not need the 8R input for use with the K2 or K3. Look at
page 20 of the KRC2 manual
What are the I and E ratings of the K3's pin 6 BIAS ?
THX! 73, Bill N2BC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
It would be quite helpful if the subject line matched the subject. Even
more helpful if this discussion were taken somewhere more appropriate.
Feeling grumpy this morning.
HNY Bill N2BC
- Original Message -
From: G4ILO [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent:
TXF is missing - see page 58 in the Owners Manual for others.
- Original Message -
From: Dave Martin [EMAIL PROTECTED]
To: David Ferrington, M0XDF [EMAIL PROTECTED]
Cc: elecraft elecraft@mailman.qth.net
Sent: Friday, December 28, 2007 6:35 PM
Subject: Re: [Elecraft] Re: Err TXF on
- Original Message -
From: Toby Deinhardt [EMAIL PROTECTED]
To: Jim Harris [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Friday, December 14, 2007 6:00 AM
Subject: Re: [Elecraft] KUSB vs K2
snip:
As far as Vista is concerned, I don't know. I've used various USB to
Serial
I've got a K3/10 with a KXV3 on order. I have a vintage military amp that
only needs 100 to 150mW of drive.
I've studied the RX antenna options provided with the K3 and KXV3 but still
have questions:
Can I reliably set the output power at the 100mW level (band-to-band) ?
Ideally I would
but.. the K3 is a no solder kit! Sorry...
I converted my shack and a couple op positions at our club shack to APP's -
soldered dozens of them, works great.
One tip: make sure of the orientation of the connector pins before
soldering especially on heavy gauge wire. This can be a bit
KRQ2 said:
As I recall, TT also basically told their customers that, This is not
a design flaw, this is how it is supposed to work. And further, even
argued back about what was and what was not necessary for their
customer's satisfaction.
Of course, my being a lurker as opposed to an Orion
This was an issue with the early Orion also. As I understand it, PTT in CW was
eventually implemented on the Orion.
Some of the contesting software will raise PTT and delay a user specified time
before keying to let the T/R switching settle. Also, on all the YaeCOMWood
rigs I have used,
I'm at the second set of resistance checks on the RF board (page 62). All look
OK except U10 pin 8, the 8T line. It is over 1M ohm... Clearly that's 500
ohms, but looks like I have an open somewhere. The 8R line is 2.5K.
I've eyeballed all the components on the 8T line / solder joints,
Just did a quick scan of the K3 assembly manual - wonder how many downloads
so far..?? !! The following will likely apply to the K3 also - I'll find
out next year for sure.
I'm at the end of day one of assembling my second K2, just finished the
Control Board. Used my trusty (old) auto
Complete K2 for sale. Serial number 5290. Includes the K2, KPA100,
KSB2, K160RX, KIO2 mounted in original K2 top cover, FDIMP, KAT100-1
$1200, shipping included to US. Reply off list to [EMAIL PROTECTED]
73, Bill N2BC
___
Elecraft mailing list
Complete K2 for sale. Serial number 5290. Includes the K2, KPA100,
KSB2, K160RX, KIO2 mounted in original K2 top cover, FDIMP, KAT100-1
$1200 firm, shipping included to US. Reply off list to [EMAIL PROTECTED]
73, Bill N2BC
___
Elecraft mailing
Super! Happy Birthday!
Want to trade?
Oh, I'm keeping K2 #5290.
73, Bill N2BC
Spence Wilhelm wrote:
All,
My wife just gave me an awesome present for my birthday! K2 #5400!
Can't wait to get started.
73,
Spence W7CSW
___
Elecraft
I'm having a difficulty with the power control in a freshly built
KPA100. When I set the power to 50W then key up (TUNE), I get appx 25W
(indicated on the K2 and external wattmeter). If I barely move the
POWER control on the K2 output will jump to 50W indicated on both the K2
and wattmeter.
Earlier post:
I'm having a difficulty with the power control in a freshly built
KPA100.
snip - remove incriminating evidence
Thanks to Philip WD8QWR I have learned my K2 and KPA100 are working as
they should. Now to re-do the FWD and REV adjustments I have been
twiddling for two days.
I doubt it's the cover holes. I've done some testing with the top and
bottom covers off while interfacing my newly built K2 to a 1500W
amplifier without any problems. (QRP is fun, but sometimes...)
Is your problem band sensitive? Is your antenna resonant? I would
suspect grounding
Hi all, recently completed K2 #5290.
I've made a couple of posts during construction, all the 'bugs' I faced
were self-inflicted. Saturday I went directly from final alignment into
the middle of the NAQP and had a ball.
Yesterday I was on CW and while fiddling with various menu settings I
In the immortal words of Emily Latella. Never mind
Yes, I said I checked things carefully. Tired old eyes. K13 was not
soldered, sigh.
I still think the voltage chart for U4 pin 5 and 7 is incorrect (and the
places they connect to). Will report back later when I make it through
I'm building K2 #5290. Have made it through the second session on the
RF board (Assembly Part II). The VCO freq is wrong
The PLL Ref Osc range is 12098 to 12084. I'm seeing a stable 12445 on
the VCO (TP1), VFO set for 4000.1.
I've eyeballed the RF board carefully with a magifying lens
I've just started building K2#5290. Thought I would pass along a small
building tip.
The search function of the current Adobe PDF reader is quite handy for
finding things in the manual.
Example 1: Having just finished populating the caps on the Control
Board, I noticed the spot for C44
#5290 arrived today. I've enjoyed reading the reflector for the past
few weeks, hope to 'contribute' in the future. In an effort to
eliminate any possibility of a haunted K2, I will hang some garlic over
the workbench before I heat up the soldering iron.
Happy New Year to all
73, Bill
I'm considering a K2. The power out spec says .5W... how much less?
I'm not much of a QRP op, my amplifier only needs 100 to 150mW. If the
K2 will reliably go to 100mW or less I can skip inserting an attenuator
and simplify T/R switching.
Happy holidays to all de Bill N2BC
47 matches
Mail list logo