While not a netbook, my full-sized (17.3) HP dv7-4171us does have a stereo
input jack. This is one of HPs higher end laptops. The input jack just has a
mic symbol on it, but it is in fact, a stereo input. I have confirmed this
by plugging in a stereo cable, and listening through headphones. I can
No, that would be Fogerty...
not John Fogarty of CCR??
or just a similar name!!
al ve3gam
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
USB-serial adapters work fine for this. -Bruce, N1RX
Don't forget you need a netbook with a serial port too.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I actually modified my K3 to do this back in August of last year. I wrote up
the details in a post you can read here:
http://elecraft.365791.n2.nabble.com/K3-switched-DC-output-jack-simple-mod-t
d5425993.html
Works great.
Bruce, N1RX
Have you plugged the KUSB in yet? It won't show in the device manager unless
it is actually attached.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I guess I -should- have been more specific. I meant that the KUSB needs to
be plugged into the computer, before it will show up in the device manager
-on the computer-.
Bruce, N1RX
Maybe I'm misinterpreting your answer, but every USB-to-Serial
converter that I have - and there are several
Not a mechanical filter, but a low noise active audio filter running
around 11 KHz prior to the ADC. The 4 selectable bandwidths will help keep
unwanted off-signal energy out of the ADC.
-Bruce, N1RX
I think that I heard Wayne say at the Elecraft display in Dayton that they
were mechanical
I ordered one early last week (as part of another order) and was told by sales
they would not be ready for shipment until this week. I have not yet received
the order, or a shipment notice. I'm sure it will be along, just wanted to
mention what I was told about the external reference kit
Re: separate lists (again). It is not obvious to me at all. As one of
thousands of people who own more than one Elecraft product, I prefer this
list remain in it's current format. There are other single rig lists out
there, and programs like Mailwasher to help one filter out what is not
Of course, keep in mind that for I/Q panadapter functions, you will need a
Netbook with a STEREO soundcard input. You need both channels to be able to
use the I/Q output from the rig. Many notebook/netbooks do not have a stereo
input jack. Be sure about this when choosing one for this application.
The KX3 will have an internal ATU option. The external 100W amp will have
it's own, optional bolt-on ATU
Bruce, N1RX
From the 5 min Dayton presentation I did not quite understand whether the
antenna tuner option is internal or external. Can somebody enlighten me
please,
73, Igor UA9CDC
Sam,
Look here.
http://twitpic.com/photos/ke9v
there are some photos of the prelim sheet. View original size for best
resolution.
Bruce, N1RX
and this magical mystery preliminary info page
can be seen where?
GB 73
K5OAI
Sam Morgan
Nate, per Wayne's comments and the preliminary data sheet, the KX3 command
set will emulate the K3. I expect you will have no trouble supporting it in
hamlib.
Bruce, N1RX
Will the PC control command set be similar to the K3? I presume the
manuals will be available a short time before
From the datasheet for the DSP chip used in the K3:
The TMS320VC33 DSP is a 32-bit, floating-point processor manufactured in
0.18-Tm four-level-metal CMOS
(TImeline) technology. The TMS320VC33 is part of the TMS320C3x generation of
DSPs from Texas
Instruments.
The K3's DSP -is- 32 bit floating
Baseband refers to the fact that the QSD down-converts the RF to IQ
streams at directly near-audio range frequencies. The ADC converts this to
digital, and the DSP then does the demodulation. From the description, the
IF frequencies are in the 10 KHz range. So, the baseband roofing filter
will be
A few still pics, and hi-rez copies of the front/back of the preliminary
data sheet here:
http://twitpic.com/photos/ke9v
Select a pic, then view full size for maximum detail.
Bruce, N1RX
__
Elecraft mailing list
Home:
While fleshing out the KX3's general coverage receive capabilities, it will
be helpful if synchronous AM detection is implemented, as in the K3. Since
many of the announced features seem to be a port of the K3 DSP firmware, I'm
hoping this will be included.
Bruce, N1RX
I'm not all that
Wayne, I know you don't have anything to do but answer questions... ;-)
I didn't get a chance to ask this last night during the KX3 webcast:
What will be the usable bandwidth of the RX IQ output? Since the dual watch
capability is described as +/- 10 KHz, I am wondering if this is the total
BW
Quadrature Sampling Detector
QSD has always meant, Your keying is defective. I'm guessing that
isn't what's meant here?
73,
Fred K6DGW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thanks, Steve!
Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
With all due respect guys...
If it is OT it BY DEFINITION doesn't belong on this reflector...
This statement is incorrect. BY DEFINITION, this list WELCOMES topics of
general interest.
Here's the description from the Elecraft web page. (note the last sentence):
The ELECRAFT email list
My brother in law was also one of those killed.
Mike
AI4NS
Terrible news, indeed.
My thoughts are with you and your family at this tragic time, Mike.
Bruce, N1RX
__
Elecraft mailing list
Home:
With the XG3 and an attenuator it would be very easy to duplicate these
tests. Just remember that **unattended** beacons below 28 MHz are illegal
in the USA (I believe NCDXF beacons have special permission from the FCC).
73, Bill W4ZV
Excellent reminder Bill. And... as has already been
At 1 mW or less on its operating frequency, this is unlikely to cause
any problems. The 2nd harmonic and higher order even harmonics are over
30 dB down from that, and the odd harmonics are 7-10 dB down. It
certainly shouldn't cause any issues at VHF.
That said, you can always add a
In part, my reason for asking is the following...
I am feeding the K3 IF Out into a fast ADC at 192 kHz, followed by a
Winloe detector, etc. for panoramic viewing, but despite the 192 kHz
sampling frequency I am only getting about 44 kHz TOTAL spectral width.
Thus, there seems to be a
Go to the Elecraft web site and the KPA500 is in the Products tab. All
you
want to know and the manual.
Phil
Philip LaMarche
True, except he asked about the KAT500, not the KPA500.
Rob,
The KAT500 is still in development.
But, we have been told that it will handle up to 500W into a 10:1
I have had this KX1 for a while. This fault was noted (maybe arose)
during a recent garden op. session.
Bands 7/10/20 are all operational selectable as normal, but 3.5 is
skipped completely.
I acquired this little gem ready built fully working, so am a bit wary
of taking it apart.
Before I
I have forwarded Nick's query to Rich, K7SZ -Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
The order form for the KPA500 indicates that after the first run sells out,
the next batch will begin shipping in July. Has there been an announcement
that we are at that point yet? Curious if I ordered today, if it would be in
the first production run or not.
Bruce, N1RX
Hi, Ed. Here's a group that I belong to:
http://groups.yahoo.com/group/FMT-nuts/
Many of the members there are true time/freq measuring nuts. The Midwest
VHF/UHF society run their own FMTs at different times of the year. You can
also Google time-nuts. If you don't mind a simplistic overview,
Poor math skills early in the morning. 9 milliHertz out of 14 MHz is about
6*E-10, or 6 parts per ten Billion, not Trillion. Still, not too shabby for a
first FMT attempt. -Bruce, N1RX
N1RX wrote:
All that said, on one of the FMTs done a year or so ago, I was able to get
within 9 milliHertz
At first glance, frequency corrections being suspended during transmission
may have a large effect on the usefulness of the upcoming PLL board for the
K144XV. If the frequency is not compensated during TX, when maximum heating
(and therefore freq shift) takes place, it would seem that the K144XV
I believe this PC connection is only for firmware updates for the KPA-500.
the operational link between the K3 and KPA-500 is via the ACC connector.
Correct? -Bruce, N1RX
Jack Brindle wrote:
The KPA500 is not in the chain. It needs its own connection to the PC.
So your chain will look like:
Thanks for the clarification, Jack! -Bruce, N1RX
-Original Message-
From: Jack Brindle [mailto:jackbrin...@me.com]
Sent: Sunday, April 03, 2011 8:03 PM
To: Bruce Beford
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3, P3 KPA500
No, it is more than that. We have implemented
Any idea how far behind this the release of the PLL board for the K144XV
will be?
Bruce, N1RX
When might we see the kit to reference a 10Mhz source?
K6CG
Very soon. I was just proofing the manual.
73,
Wayne
N6KR
__
I refuse to get into the plus/minus arguments about Powerpoles, but I do
have a warning about a particular product I bought a few years ago. It
is a plastic frame designed to hold a bank of powerpoles, which I
installed on a little battery pack/charger storage case I built. It
contains
I refuse to get into the plus/minus arguments about Powerpoles, but I do
have a warning about a particular product I bought a few years ago. It
is a plastic frame designed to hold a bank of powerpoles, which I
installed on a little battery pack/charger storage case I built. It
contains
Julian, G4ILO wrote: (Quoting N1RX)
Another option for configuring multiple Powerpoles to prevent accidental
reverse polarity is to arrange the connectors thus:
B R R B
B R R B
With that arrangement couldn't you still plug the power cable in offset to
the left so the positive goes
Doug, N6TQS wrote:
I like the APP for the main power connector on the K3, but having the
12VDC OUT and the PTT IN connector the same seems a Murphy-proofing
fail. The fuse is very likely to fail before the device that's supposed
to drive PTT IN, but
Where is that fuse, anyway?
Could the T1 be modified to give CW read out of last freq matched by it?
Thanks, Danny Dyer, Wb4idu.
Hi, Danny. I saw that you asked this question before, but no one responded.
The T1 does not have the ability to measure the frequency it is matching.
So, the short answer is no, the T1 cannot be
Jim asked:
What's a GPSDO setup go for including an antenna?
73
jim ab3cv
You can put together a GPSDO system with 10 MHz output for less than $200.
Here's just one example:
Ebay item # 290322053618 By buying the items separately, you can sometimes
do even better on price.
The Trimble
If you want to participate in the WSPR project you need to be within 1Hz.
73
Max/ZL4VV
Actually, No. You just want to -drift- less than one Hertz during your
transmission period. Absolute accuracy is not required. A stable transmitter
is.
73,
Bruce, N1RX
LED monitors are still LCDs. they just use LEDs for the backlight, instead
of fluorescent lamp. In general the LCD monitors are quieter than the CRT
type. I have not heard of any data indicating that LED backlights for LCDs
are RFi-quieter that CCFLs. (cold cathode fluorescent) as a breed.
it
Copy and paste onto one line in your browser:
https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=ExhibitsR
equestTimeout=500calledFromFrame=Napplication_id=290417fcc_id='UTR-KPA500
'
Or, Go here:
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Enter Elecraft for
Mark wrote:
Who is going to calculated alternate replacement values of the resistors
in the two attenuators so that the KPA500 may be driven to a full 500
watts by a K3 / 10?
Mark, NØOKS
You are, if you intend to try this on your new KPA-500. -Bruce, N1RX
Wow! I don't know who leaked an early draft of the Owner's manual for that
site, but it's an early draft filled with incorrect and incomplete
information!
I'm presently working on the real Owner's manual - Perhaps someone with
the
authority (Wayne or Eric) will make it available soon.
Ron
Well at least it has more info than what I have with the real KPA-500 :-)
Gary
Show-off. That's just mean... 8-) Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I'm a licensed Navy MARS operator. It is not uncommon to have very long
digital messages that need to be sent using digital modes that will take
longer than 10 minutes to send. This limitation pretty much eliminates
this
amplifier from being able to be used in my shack for MARS purposes.
Nice write-up on tips for using the APF function, Wayne.
Would you please consider adding this to the K3 Operating Tips page on the
Elecraft website? (and the manual, as I am sure this will be a recurring
area of inquiry...)
73,
Bruce, N1RX
On Dec 31, 2010, at 4:13 PM, Guy Olinger K2AV wrote:
What gets me in a K3 is that there is still some room in there, even
after installing the KRX3 to the 100W transceiver, to add something
else. So far the possibilities haven't tickled my fancy.
We're saving it for a fuel cell :)
Wayne
Audio peak Filter
-Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Sam wrote:
isn't that kind of what the CWT
or any cw decoding software
does when decoding?
GB 73
K5OAI
Sam Morgan
Not exactly. My understanding is that an audio peaking filter actually
boosts or accentuates the audio at a particular frequency, rather than
attenuating those at other
, October 24, 2010 1:45 PM
To: Bruce Beford
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] APF For K3
Seems to me that adjusting the Pitch to one that most comfortably
stands out from others and then using Spot ought to accomplish the
same thing. No?
--
73,
Dick KA1OZ
Middleborough, MA
Gary,
If I recall correctly, the BNC connectors are on the top lid, the RCAs on
the lower panel. If you use the BNCs, you will have to disconnect them
(unsolder) to completely remove the top cover for service. I think that is
the only real difference.
GL,
Bruce N1RX
David,
You can only have one filter board in the K1 at a time.
My 4 band board is for 40m/30m/20m and 15m.
I have a 2 band board I swap in for 160m and 80m.
73,
Bruce N1RX
__
Elecraft mailing list
Home:
Hi Steve.
I installed the stiffener plate mod on both synth boards in my K3, s/n 559.
It probably is only really needed if you run CW, with the internal speaker
on, and the sidetone turned up fairly loud. It is under those circumstances
that the speaker vibration can flex the synth board,
Hi Larry. My comments in-line, below:
Larry, K2GN wrote:
Well, it's still doing the freeze.
I have found it in the freeze state 4 times while I'm not operating,
This remains a big mystery.
Indeed. If it is locking up while you are not operating (i.e. transmitting)
then that rules out an
Glenn,
That output is fused internally at 600 mA, and is supplied via a 1n4007
diode (1 amp max). Best not to exceed the 500 mA recommended max load. An
option would be to supply power to your powerpole strip from the same supply
that feeds the K3, but have it switched by a small relay controlled
I think it was originally intended to be a panel mount SMA. There was some
recent discussion around Elecraft -possibly- developing a form of crude
GPS-lock that may make use of this connector hole. No word on possible
timeline.
Bruce, N1RX
Anybody know what kind of connector is supposed to go
I am using latest beta firmware 0.31 on my new P3. I notice that when the
peak hold function is enabled, it disables spectrum averaging (if it was
enabled). Would it be possible to have peak hold available while using
display averaging?
Bruce, N1RX
K3 559, P3 97
While running my P3 powered from the DC output on the K3, I noticed that the
additional current drain is not reflected in the on-screen display of the
K3. I will probably look into changing the point at which this power jack is
tapped off the K3. I would like the ammeter in the K3 to include any
Re: Having the DC out accessory jack output current measured by the K3.
Well, I looked at the schematic and determined that this would (in theory)
be a simple mod. Page 5 of the schematics (page 3 of 4 Iof the K3 RF board)
shows the DC power control/measurement portion of the K3. The DC out
Johnw, N6AX wrote:
I experienced my very first vapor-lock (MCU LD freeze-up) when doing the
V4.05 download with the P3 connected in the RS-232 path..have done
many, many firmware updates since receiving my K3 (S.N 567) with no
glitches at all...is this a coincidence?
Did you
Phil wrote:
➢ What is the IF Buffer Mod -- did I miss something? I am Serial number 0030.
Phil, the IF buffer mod increases the gain of the IF output buffer –inside the
K3- by changing a resistor value. What matters is the serial number of the K3,
not the P3. Check the Elecraft website K3
The KPA500 is the same size as the K3.
Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Not much different than a K3, with connectors attached (RS232/coax...)
73,
Bruce N1RX
-Original Message-
From: Dick Dievendorff [mailto:die...@comcast.net]
Sent: Friday, August 13, 2010 9:10 PM
To: Bruce Beford
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Serial Number 0030
That same sentence has a mis-spelling of the word single as singal
-Bruce N1RX
Gus Hansen wrote:
Is there an Elecraft mailto address for corrections and suggestions
regarding product manuals? It would provide for timely feedback and
minimize clutter on this reflector.
An example
K3 s/n running v4.03 f/w
KRX3 installed
K144XV installed
Have entered a local repeater freq/offset/pl tone into VFO A
Output/K3 RX: 147.285, positive offset (147.885 Tx) pl 103.5
Have another local repeater output freq on VFO B: 146.760
Can hear both repeaters fine.
Once I TX on VFO to use the
An additional detail of the firmware strangeness when using the K3 on 2M
with the K144XV:
When tuning VFO B, I will not increment to the next MHz. It wraps around
within the same 1 MHz segment.
Bruce N1RX
__
Elecraft mailing list
Home:
Knut-
4.05 has been designated a regular production release. You do not use the
FTP method for regular production releases, only for beta releases. Just
start K3UTIL, and check the box that says Copy new files from Elecraft into
local folder. Then click the button that says Check Versions Now. It
for all. Some of us
enjoy being early adopters. Here, we have learned that that can be a -good-
thing.
Bruce Beford, N1RX
K1, KX1, K2, K3 (and P3)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Lyle Johnson wrote:
I just received my FLEX-1500
Nothing like a little intrigue for our list members :)
Gawd, I Love/Hate you guys... Keep the ideas flowing, I'll keep buying the
results.
Signed,
N1RX
Confirmed Elecraft groupie...
(we may need some kind of 12-step program...)
Eric posted the following on July 4th. This qualifies as an update in my
book.
We're darn close and the P3 is proceeding on plan so far. Everything has
been released to production and we are just awaiting delivery of the
final production sheet metal and stuffed PCBs. We're also refining the
Send an email to pa...@elecraft.com and they will send it right out.
-Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Phil Lamarche wrote:
LDG is shipping a new 600 watt auto tuner this month for only 359.00. It
supports Icom and Yaesu for tracking with a cable. Emailed the factory
about the K3 and they said they had no plans to support Elecraft. That
tuner with the new amplifier would be perfect and LDG
If past is prologue, then the manual will not be posted until just as they
are beginning to ship. The distributed workforce of Elecraft dictates this.
Often, there are adjustments to the assembly process, with pictures of the
actual commercialized boards and parts being assembled. This is
There -is- a K3 only list, on Yahoo groups:
http://groups.yahoo.com/group/Elecraft_K3/
Wayne, Eric and Lyle do read that list, and respond to queries there. Still,
there is a lot of K3-related activity here that you would miss out on. I
subscribe to both.
Bruce, N1RX
The app note for modifying the K3SYN board has been posted to the K3
Enhamcements and Application Notes page at:
http://www.elecraft.com/K3/k3_app_notes.htm
It is a simple one-resistor mod. Next time I have the rig open, I'll
probably do both of mine.
Description:
In rare cases, at certain
That should read Enhancements not EnHAMcements, of course. 8-)
Bruce N1RX
K3 #559
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
The K3UtilityVersionInfo file with the latest beta includes the following
info:
; K3 Utility Version information
CurrentVersion = 1.3.5.8; the most recent Windows version
published
The latest version of the util currently available for download on the
website is 1.3.4.26.
Is the
Hi Terry.
No new menu settings need to be made or changed as a result of the DSP
upgrade or the IF buffer mod. Just make sure you that if you have the subRX
installed, you have the same firmware version in the main and sub DSP. It is
also always a good idea to have the latest version of the K3
Sam,
It sounds like something is interfering with the communications between K3
Utility and the K3 itself.
Are you using a true RS232 port on the PC, or a USB-RS232 adapter? If there
is a USB adapter inline, are you then going through a USB Hub? If a USB
adapter, are you using the latest drivers
Sam Morgan k5oai.sam at gmail.com wrote:
forgot to say I AM using serial cable, no USB involved here.
Ah, very good. I would try another cable, and also make certain that no
other programs are running that may use the port. Are you using the latest
version of K3 Utility? Also, some have reported
I believe Use AUX appears when the sub RX is tuned to a higher frequency
band than the main RX. It is a reminder to use the AUX input connector in
this case, due to the input filtering of the main RX.
-Bruce N1RX
__
Elecraft mailing
Eric stated yesterday that the K3 ALC mod would be required to use the ALC
on the KPA500:
You will need the mod.
This change was included on All K3s shipped on Dec 10, 2008 and later.
(Rev B KIO3 Digital board)
See: http://www.elecraft.com/K3/k3_app_notes.htm
and scroll down to:
K3 Negative
size as a K3,
so Rose won't need to design a new cover.
I really don't know much more ... stay tuned.
73! Ken Kopp - K0PP
Man! This must be the first time I have ever been right about the Elecraft
rumor mill:
Date: Mon, 15 Feb 2010 17:09:36 -0500
From: Bruce Beford bruce.bef
Bill, W4ZV wrote:
Old news. KPA500 was leaked by Eric on 24 November in this accidental
post:
http://www.mail-archive.com/elecraft@mailman.qth.net/msg86032.html
True. An incorrectly addressed reply led to that little slip, then a couple
months later a mention of something new in a box the
Make sure the proper antenna port is selected for each band?
-Bruce, N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
You can -enter- the TCXO data into the K3Utility. The K3 doesn't -do
anything- with that data yet. The temp correction portion of the K3 firmware
is still pending.
-Bruce N1RX
__
Elecraft mailing list
Home:
Phil, K8MBY wrote:
My original question was how to monitor 2M on the sub, while using the main
for HF. I don' seem to be able to do that.
No Phil. You can't do that (at this time). This will require some additional
hardware (not yet available), that will allow the sub RX to have a different RF
Eric wrote:
Let's end the AMP thread for now. We are not planning on an 800 or 1500
W solid state amp at this time.
73, Eric WA6HHQ
Man, I love it when there is an opening. Notice how Wayne ruled out very
specific power levels. My money is on the 400-500W class amp in the same
sized box as
Dick KA5KKT wrote:
14.62.8..?
Clearly- early beta firmware needs some tweaks. My guess is that this should
probably have read 14.062.8 Nothing like good lively, pre-release product
debate, huh?
__
Elecraft mailing list
Home:
Don't bet on free hats or tee shirts, or scantily-clad women handing them
out. Unless Eric's head counts towards that last...
Got one of those K3 buttons here, from when Eric attended the New England
ARRL convention in August '08. I hope Elecraft gets a booth up here again
this summer.
Have fun
Rich,
If you will look at the photo #2 at the lower right quadrant of page 32- You
will see that what you are to cut are the bits of the pins that stick out of
the back of the small board attached to the encoder. Do this before you
install the encoder. This is done to prevent these from shorting
Stan W5EWA asked:
I've noticed that I am unable to operate the NR NTCH independantly
on the main sub receiver. If I turn either control on, it's on for both
receivers. Can't turn it on for one receiver and have it off for the other
like you can for the Preamp the NB. I installed the
Phil K8MBY asked:
Anyone installed the K144XV yet ?
Comments
I asked the same question earlier this week. No one responded. I note that
the K144XV firmware update utility mentioned in the docs has not been posted
yet. Perhaps the shipment schedule has slipped again.
Some word from Wayne or
Thanks, Guys. I appreciate the updates.
I am one of those who ordered early (within minutes of the page going up).
I appreciate the passion you guys (and the whole staff) pour into all the
Elecraft products.
73,
Bruce N1RX
(K1, KX1, K2, K3... Yada, Yada)
Jim Brown wrote:
Now a brickbat to Elecraft. Speakers are individual products, they
don't come wired with 3-circuit plugs, and as noted above, it's
not easy to buy parts to build adapters. What Elecraft SHOULD have
done is provide TWO output jacks, not one. They played cheap (or
dumb, to
Limited shipments were scheduled to begin on 12/24, and more last week. Have
any been received and installed?
-Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Make sure VOX is turned on.
-Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
401 - 500 of 561 matches
Mail list logo