Hey guys.your all spoilt you know.
My shack is under the Southern Cross..for all my space, it's still
untidy. Adding an external speaker would just add tl the clutter.
No, i didn't mean my mindbut
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 24/04/2013 7:04 PM, Edward R
H..Great, be nice if they could be run on 240/50Hz though for those of
us languishing in the dark dim ages.:-(
Oh just kidding..
I use the amplified speaker for the KX3 in the mobile and it helps a lot by
adding some volume to the audio for those of us hearing challenged folks.
73
Matt,
The matching speaker for the Yaesu FTdx9000 (we all now how much they cost)
is expensive. Is it better than the two internal speakers in the
transceiver?...not really was my opinion. Even the FTdx900 with two
internal speakers was not great.
We all have different audio opinions and to make
Rich,
I have the opposite setup here.
The RIT knob is my checking the band tuning knob at 1Khz and the VFO is
set at 100Hz. Not everyone's idea of course but old habits die hard.
73
On 23 April 2013 01:14, Richard Fjeld rpfj...@embarqmail.com wrote:
Fred,
You may like to do this; the
Scott,
Over the past 12 months I sent numerous emails trying to order one of his
antennas. Gave up in the end as I never did get a reply.
In a word?hopeless and I just figured he didn't like Aussie's...:-)
I think you nailed it buddy, Recipe for disaster sounds about right to me.
Oh, and
Bill,
Your number 3 would be helpful and has been long promised and was, I was
told, on the list at either number one or two...since then, not a word so
not sure when/if it will see the light of day.
I may be in the minority, but I bought my P3 with this feature in mind and
I was told it would
Now for an upgrade release of the P3 Tx monitoring. Long awaited.
Gary
On 26 March 2013 07:11, Garretson w...@arrl.net wrote:
On Mon, Mar 25, 2013 at 8:27 PM, Brian Alsop als...@nc.rr.com wrote:
I notice that in the narrower signal spectrun the two tone peaks have the
same amplitude.
Not sure 11W drive is good for normal rag chewing with the KX3. It does get
rather hot to touch.
I would hope that the KXPA100 would only require 5W for 100W output or
close to that.
73
On 24 March 2013 18:27, Fred Smith m...@mo-net.com wrote:
My KX3 will output 354w with 11w of drive power.
Contests can often help you get that much sought after entity...:-)
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 22/03/2013 6:33 AM, Gil G. g...@keskydee.com wrote:
On Thu, 2013-03-21 at 16:21 -0400, Joe Subich, W4TV wrote:
It would be helpful to have a small section of the bands “off
No option necessary. Pay attention to where those pesky fingers go:-)
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 22/03/2013 7:08 AM, hawley, charles j jr c-haw...@illinois.edu wrote:
No...please Elecraft don't limit everyone because someone bumps his
keyer...unless it's optional.
Good analysis Fred.
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 22/03/2013 8:43 AM, Fred Jensen k6...@foothill.net wrote:
Actually, entire bands have been declared contest-free by general
agreement among hams, worldwide. 30, 17, and 12 meters have been
contest-free from their
Don
As we get more mature (read old) we are supposed to slow downnot yearn
for the need for speed as mentioned in long ago movie:-)
73
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 22/03/2013 1:39 PM, Don Wilhelm w3...@embarqmail.com wrote:
Rich,
If you press the pedal to the metal
-
:'(
Aw shucks folksit was a slow news day heregrin
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 22/03/2013 1:50 PM, riese-k3...@juno.com wrote:
dont worry they will start talking about the best mike to use with the K3
odd lot
Bob K3DJC
On Thu, 21 Mar 2013 23:32:41 -0400 (EDT)
Have you got Menu Tech Mode ON?
Gary
On 15 March 2013 22:33, David G4DMP da...@g4dmp.fsnet.co.uk wrote:
I am getting dBV here, Bob, the VFO-B knob being fully clockwise.
I presume you have up-to-date firmware? Mine is uC=4.61, D1/2=2.80,
FL=1.15, DR=1.03.
73 de David G4DMP
In a recent
Never a truer statement made Fred.
Gary - vk1zz
Sent from my Galaxy SIII
On 14/03/2013 8:52 PM, Fred Smith m...@mo-net.com wrote:
The same could be said be said about buying a loaded K3/P3 SVGA for $5500+
instead of an IC-718 for $700 both radios?
Myself I prefer a better quality of radio,
Same here. I thought it was me:-)
Gary
Vk1ZZ
K3, KX3, KPA500, KAT500,P3.
On 15/03/2013 6:14 AM, Richard Fjeld rpfj...@embarqmail.com wrote:
I suggest you test e-mail into your Sales department. I have had previous
emails to them about other things go un-answered also. (I wonder if other
If it ran on Linux i would be confident but running in a Windows
environment is a concern for me.
The annual licence fee is also a concern for me.
I guess we wait and see.
Gary
Vk1ZZ
K3, KX3, KPA500, KAT500,P3.
On 15/03/2013 7:24 AM, Joe Subich, W4TV li...@subich.com wrote:
I can't wait to
This weekend the JMFD will be running in VK.
I expect many portable and base stations will be running on HF. (10, 15,
20, 40, 80 and 160)
It would be nice if we could work some kon this list so how about listening
out for us...VK1ZZ / VK4XA an all Elecraft operation.
73
Gary
Vk1ZZ
K3, KX3,
Can do that with TXEQ in the K3 and you don't waste money on another base
mic.
The MC60 can easily be made to sound the same. Bonus is it already has a
PTT lock too and no extra cable from Heil at inflated prices.
73
Gary
Sent from my Galaxy SIII
On 14/03/2013 10:37 AM, Jay pc...@verizon.net
But will it make my coffee?
74
Gary
Sent from my Galaxy SIII
On 13/03/2013 2:16 PM, Edward Dickinson III softb...@windstream.net
wrote:
Speculation..? Visalia, not Dayton. I think I like the idea of a variable
page, touch screen interface. .not sure about how successful such an
I would like to know exactly what/which model transceiver meets the K3
specifications AT the same or lower cost.
I don't know of any, but, I could be wrong. All of the current crop of
transceivers work, it's just that the K3 does it better...:-)
JMHO...and I AM biased of course!
73
Gary
On 2
-net.com wrote:
Gary
** **
I did not mention a price and that was intentional for all the obvious
reasons there were some in the 10k+ range. My K3 (loaded) replaced a
FTDX-5000MP and with the P3/SVGA both about the same price $6000 range.***
*
** **
Fred/N0AZZ
** **
*From:* Gary
Richard,
That was a Great answer...I learnt something today to.
Gary
On 20 February 2013 15:52, Richard Fjeld rpfj...@embarqmail.com wrote:
Pete, N4ZR
There have been some good answers for you. (I saved some to help others.)
My answer(s) is to the way I read your question(s).
The 'pitch'
Paul,
Thanks for the posting. Was great to read and glad to hear he and his
family are all safe.
Scary stuff eh?
73
Gary
On 18 February 2013 23:40, Fred Smith m...@mo-net.com wrote:
Paul thanks for posting that.
Fred/N0AZZ
-Original Message-
From:
The one that didn't give you what you wanted first...:-)
Chuckle
Gary
On 19 February 2013 13:37, Jim Wiley jwi...@gci.net wrote:
So, which one is the evil twin?
- Jim,KL7CC
Direct from one of the Elecraft Twins: We prioritized the amp ahead of it
(same engineer on both projects).
Fred and all,
My personal opinion is that virtually all manufacturer's, well perhaps all
but two, produce fine products that appear to meet pretty much all of our
requirements. Some of us even place these products in rather extreme
conditions that manufacturers would rather we didn't do.
By and
Dick,
I am using a West Mountain Radio PWRspkr 15W for mobile. It requires 12vdc
but the distortion is now gone as I only need to run the audio @ 15.
I am NOT using the KX3 as a portable walk-around transceiver though.
Strictly Mobile or Desktop operation.
73
gary
On 17 February 2013 23:56,
Ken,
i use a push up mast from Spiderbeam from Germany for exactly the
application you have and it works a treat. They are not cheap though.
There are two sizes and mine is the longer one of the two. It is now
several years old, has been exposed to the elements for a many weeks at a
time and has
Mel,
Thanks for posting that. Getting 2 of those..:-)
Gary
On 18 February 2013 07:21, Mel Farrer farrerfo...@yahoo.com wrote:
I purchased the Max Gain System up to 33 feet self supporting and also
very strong and heavy but also quite ridgid.
http://www.mgs4u.com/index.html
For what it is
Bill,
Add one element $230A$double my 500W = $3,000..I did the
former...:-)
TIC for those who wish to create a technical discussion...:-)
gary
On 17 February 2013 13:31, Bill K9YEQ k9...@live.com wrote:
Yes. For the power you cannot beat the KPA500. I would own one, if I
didn't
I guess this thread raises the question: Why does this FW remain on the
Top Secret list...:-)
just askin'
Gary
On 14 February 2013 11:06, Mark n2qt n...@verizon.net wrote:
I had missed that this wasn’t discussed on this reflector, so first a
little history
At the end of December, on the
And better yet on a Zepp
Gary
On 14 February 2013 11:23, Ariel Jacala n...@hotmail.com wrote:
I second Gerald. The Zs6 is a much more efficient antenna and provides a
better balance of performance. I got DXCC on the G5RV but I got DXCC -
QRP on the ZS6BKW. I took comparative measurements
Guess I should have added...TIC
:-(
On 14 February 2013 12:12, Joe Subich, W4TV li...@subich.com wrote:
As anyone who was in the WPX RTTY contest this past weekend knows,
anything that can help reduce the unnecessary interference from
overly wide transmissions is more than welcome.
Sorry Don, I use a 40M Double extended Zepp, when I can find a couple of
tall trees with nothing in between.
Not easy in a country where the National Average Height for trees is an
amazing 5 metres high...:-)
*Getting* the height is easy, *finding* the trees is a little more
difficult.
73
Gary
To all those Elecraft owners attending Kyneton Field Day on Sunday.
I will have an operating K-Line and KX3 on display and would appreciate any
Elecraft owner stopping by and assisting in answering questions from those
who want to know more about these fine products.
If interested, please let me
Eric,
I have the K3 and KX3 sounding pretty close in the headset on RX. (CM-500)
I have found that adjustment of the RX-EQ needs to be done first and then I
set the Hi/Lo cut and I then went and rechecked my RX-EQ settings to be
sure I had the best audio for me. By doing it this way I now rarely
Would this provide the same result when the user has either a hearing
defect or reduced hearing?
Would the above issues be irrelevant.
It does sound like an interesting project though.
73
Gary
On 5 February 2013 16:54, Wright, Robert rwri...@ap.com wrote:
This sounds like an interesting
Scott,
Personally?...I tend to agree with you. In my situation, I set up portable
under my Motorhome awning and I could use a 'Lockout' feature daily. I do
realize this is not for the shall we say majority, however I felt your
question was a valid one.
I use the current K3 partial lockout
not be doing so, unplug the power cable and take it with you or store
it someplace secure.
73,
... Joe, W4TV
On 1/31/2013 7:37 PM, Gary Gregory wrote:
Scott,
Personally?...I tend to agree with you. In my situation, I set up portable
under my Motorhome awning and I could use a 'Lockout
I only see this rarely when I use my open wire antenna. The amp does not do
this on my standard dipole fed by coax using a choke.
I have always assumed it was RF but that is only a thought, I have not been
able to prove it as yet.
Regards
Gary
On 24 January 2013 00:21, hawley, charles j jr
That would be nice.
I really don't want/need to join yet another group/list etc.
Yahoo is NOT on my list..:-)
Gary
On 24 January 2013 09:31, Mike Harris mike.har...@cwimail.fk wrote:
Might it be useful to also make it available somewhere where it doesn't
require joining another list?
Scott,
how much for my silence?.:-)
Gary
On 18 January 2013 07:53, Tom H Childers n...@n5ge.com wrote:
It makes working CW Pile-ups a breeze. I can't say how it does on
SSB pile-ups, because I've never been in one.
On Thu, 17 Jan 2013 13:32:47 -0600, W4SK w...@comcast.net wrote:
Dave,
The P3 NEEDS the upgrade to monitor the Tx of the K3 in all modes. This
will make it far more useful.
The wait for this has dragged on too long and still no word on a release
'time-frame'
Gary
On 18 January 2013 09:05, David and Dianne on Comcast dhh...@comcast.netwrote:
Ever
just waiting to be unlocked that I am disappointed that it has
been many months since the last firmware upgrade.
Having said that, the P3 has become an integral part of the way that I
operate and I cannot imagine being without it.
73 Stephen G4SJP
On 17 January 2013 22:11, Gary Gregory vk1zzg
Ron,
That would be a nice 'option' to have.
I use my KX3 as a mobile rig and when touring and I come into a town I need
to either turn the volume down (easy) or simply turn it off and this does
become more complicated with the 2 button press while keeping my eyes on
the road ahead.
I don't know
Begali Magnetic Pro...it's a statement yes, but s smooth to use..:-)
gary
On 5 January 2013 14:30, Ron D'Eau Claire r...@cobi.biz wrote:
Double paddles work non-Iambic with no changes whatsoever. Just do not
squeeze them! That's why 99.9% of the paddles sold are double paddles.
73 Ron
Thomas,
Your so right. The look on my face when I finished and powered it up would
have been priceless I reckon.
I am still grinning.
Gary
On 5 January 2013 14:55, Thomas Horsten tho...@horsten.com wrote:
But you lose the feeling of wow I built this and look how awesomely it
works in
...@mailman.qth.net] On Behalf Of Gary Gregory
Sent: Saturday, January 05, 2013 2:41 AM
To: Thomas Horsten
Cc: Elecraft email list
Subject: Re: [Elecraft] KX3 - Factory Testing identical to Kit Testing?
Thomas,
Your so right. The look on my face when I finished and powered it up would
have been priceless
Guy's,
The external PA is about ready to go to the Field Testers so I doubt they
would stop work on it right now.
I have not read where the 2M module is 2 years away though?...seems kinda
long eh?
I must have missed something...again
Gary
On 3 January 2013 06:14, ~BG~ archie...@gmail.com
Daniel,
Your Canadian white paint is probably not going to last 6 months in VK4 (I
don't think that is quality control related either)..:-)
73's
Gary
On 31 December 2012 08:55, VE3GNO Daniel yo3...@yahoo.com wrote:
It's Canadian white paint...UV protection for half year at least. We have
Yes and No!
cw+SSB Yes. Config menu allows you to turn this on/off
Unfortunately no in AM/FM AFSAIK
73's
Gary
On 28 December 2012 14:07, Chris Johnson elecr...@ozy.us wrote:
I read through the manual again, but couldn't find it. I'd like to be
able to send CW regardless of if I was in CW,
Likewise here.
Win7, USB hub (4 port, powered by the laptop) connected to the K-Line and
numerous FW updates done over the years. I have been FT'ing on several
Elecraft products and I have been using both Prolific and FTDI USB chipset
devices again with no issues.
I do a configuration save prior
The kat500 stores information in what are termed 'Bins' and communication
of data via Auxbus recalls memories from these 'Bin' locations and hot
switching does not occur.
I can QSY, with the kpa500 in OPER and 'IF' the kat500 needs to tune it
interrupts the amplifier key line and either selects
The Utility is useful for setting up in band memories as well as multiband
antennas etc.
gary
On 24 December 2012 09:42, Gary Gregory vk1zzg...@gmail.com wrote:
The kat500 stores information in what are termed 'Bins' and communication
of data via Auxbus recalls memories from these 'Bin
Keith,
The kpa500 is NOT required to make the kat500 work as described. In the
manual, and the utility describes operation of the kat500 in both auto and
manual modes and 'teaching' the kat500 can be done with the utility.
Any brand amplifier will only need the Key Line routed from the
Dave,
I agree that the K3 is an SDR by definition, one of the many reasons I was
an early adoptee.
Having said that, is there a front end software package that emulates all
of the K3 FW settings, provides a good SDR like screen such as PowerSDR
etc, that has been developed for the K3?
I know a
I believe 1.15 had the issue, and 1.18 is the latest revision that should
have fixed the issue.
Gary
On 21 December 2012 09:41, GDanner gdan...@windstream.net wrote:
I'm having the same issue.
Recently I installed a KAT500 upgraded both the KAT500 KPA500 firmware.
I'm sure the K3 was
Steve,
Some are having the problem it seems, I did and somehow I fiddled long
enough it got tired of playing with me, or maybe it took pity on an old man
and quit...:-)
FW sure is a 'Black Art' at times, or so it seems.
For now, mine is behaving, I know not why, but it's playing in the sand box
Nope, not allowed in VK either!
On 11M band you need to learn a foreign language and forget asking for
help, mostly you just get QRM'd and so it goes on.
I think Eric will close this thread soon..:-)
73's
Gary
On 14 December 2012 23:29, amsct...@comcast.net wrote:
Wow...just...wow...
And if you end up having the KPA500 powering up when you turn on the K3
it's one of those undocumented features.:-)
I have checked my settings and I cannot see what has changed, but the
behavior is not unwelcome, just mystifying.
Gary
On 12 December 2012 04:34, AE4CW ae...@att.net wrote:
Perhaps I should explain further. I have not used (read never) had the Y
cable in use as I don't have another device needing to share the AUX output
for the K3 and have always used the supplied Auxbus cables and I still do
so.
The 'feature' seemed to appear after I switched the longer Auxbus
:-)
Giggle.
Bet the combination will look good on the Tax Forms eh?
73's
Gary
On 12 December 2012 11:40, Fred Jensen k6...@foothill.net wrote:
On 12/11/2012 12:43 PM, Keith Heimbold wrote:
Tomorrow night I am heading up with clients to mammoth for a
snowboarding / skiing business
Fred,
Yes I have.
To correct this reading, I activated the K3 ATU and tuned, I then went to
Bypass on the KAT3 and all returned to 1.1:1
See if this works in your setup.
Gary
On 9 December 2012 09:18, Fred Jensen k6...@foothill.net wrote:
In 10m contest [CW], I'm seeing 2:1 SWR on the K3
The auxbus cable from the K3 to kat500 then kpa500 works fine with no user
adjustment required here. In early FT days we saw this on odd occasions but
the FW version 01.15 for the kpa500 resolved this by slowing down hi vswr
detection by the amplifier which caused the kpa500 to fault on occasion
Does anyone use an external amplified speaker in a mobile installation with
the KX3?
A search so far has found BHI speakers but these are DSP speakers which I
don't require.
73
Gary
--
*Gary - VK1ZZ
Motorhome Portable
The Shack*
*Elecraft K3
P3 Panadapter
KPA500FT
KAT500FT**
KX3-K
*
Hi to the group.
I have been reading the recent postings on AGM battery use and some of the
set-ups being used seem a little odd to me.
I have in my Motorhome, 800W of solar panels @ 24V and a pair of 270aH AGM
batteries. I use 24vdc to 14vdc stepdown to power the K-Line and KX3/GS-3
screwdriver
Don, Keith,
Isn't that the event that moves us into the 5th Dimension where all QSO's
needing completion will need to use a K-Line or lesser K2?
:-)
Sirens are winding up now
Gary
On 18 November 2012 03:02, Keith Heimbold ag...@hotmail.com wrote:
Doomsday net? What time and frequency?
After you set your preferred antennas to the bands you want etc...do tune
on say CW portion, then a couple of times through the SSB portions to
create 'store point in the kat500 memory bins'
From this point on, no manual initiation of tuning is needed.
When the KAT500 reaches the threshold you
*My thinking is the FW will change when Lyle and Wayne have finished as
Wayne has already posted on here awhile ago. Hence this discussion may
indeed be mute?
Just my observations along with successful use today on 40M yet again.
There will always be room for improvement but the noise changes
Is there a portable version?
:-)
Gary
On 6 November 2012 09:16, paim paimg0...@btinternet.com wrote:
Dan
yes look on this link http://www.dc9dz.de/en/tsunami40k.html
vy 73
E.P g0uut
__
Elecraft mailing list
Home:
*OR..release a new model...:-)
Gary
*
On 5 November 2012 00:09, j...@n7us.net wrote:
Stable is an appropriate word. With other manufacturers' equipment that
I've had, there would still be complaints about unresolved problems. ;-)
Jim N7US
Sent from my iPad
Original
*Fred,
I hear the relays clattering BUT nowhere near as loud as the LDG product
and this is only during a full tune.
Once the bands have been swept initially, you only here a click on key up
as the kat500 selects a memory bin.
Gary
*
On 2 November 2012 21:18, Fred Smith m...@mo-net.com wrote:
*Jack,
That has been my suspicion since the KPA500FT arrived. I wait till the
banner has cleared AND the kpa500 has been acknowledged by the K3.
In the early days of testing I noticed this anomaly quite often but since I
started to 'wait' for the K-Line to complete 'turn on' the issue has not
Maybe a typo?.:-)
On Thu, Oct 18, 2012 at 9:53 AM, N5GE li...@n5ge.com wrote:
What was the purpose of sending this to the Elecraft List?
What is your question for the list?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 17 Oct 2012
*Ollie,
Correct.
I might add the advantage of using AUXBUS on the KAT500 (for me at least)
is on receive, changing bands to 'check' another band, there is no need to
Tx a DAH to effect a change from say ANT1 to ANT2 if that is the antenna
assigned to that band.
Without AUXBUS connected one has
*Off the Elercaft order page:
**E850463* *Optional KAT500 to KPA500 Cable*
KAT500 to KPA500 cable. Provides band data to KAT500 for band change prior
to TX,, and feeds through KPAK3AUX cable data from the K3 to the KPA500.
Typically used in addition to the KPAK3AUX cable from the K3 to route
*Joe,
From my experience Joe the reliability outdoors is not real flash either.
Some folks will have had success with them but not here.
73
*
On 10 October 2012 14:04, Joe Subich, W4TV li...@subich.com wrote:
How about the Ameritron RCS-12?
The Ameritron switch is a tree relay
*John,
Checked my emails later than normal for the day and so I see you have had
an issue like I had once except i discovered the jumper was indeed faulty.
Glad to see you got it sorted.
73
*
On 8 October 2012 08:31, zen...@netspace.net.au wrote:
Group,
I think I've
*Don,
Right on the money.
From my point of view there are still unanswered questions on functionality
and these are still to be sorted.
73
*
On 7 October 2012 05:49, Don Wilhelm w3...@embarqmail.com wrote:
Hal,
I understand your frustration, but one of the BIG tasks of Field Testing
is to
*Hi Guy's,
I have mine under the K3 sitting on the desktop and this makes the height
of the K3 just right for me. I now don't use the bails on anything. My P3
is on top of the KPA500 on the left as you look at them so my airflow is
not restricted at all.
YMMV..
73
*
On 4 October 2012 07:11,
*Al,
whilst your statements hold true for you, I DO use the 1.8Khz almost as my
default. Attention paid to Hi/Lo gives me nice intelligibility and if you
were listening to 3D2C last night on 20M and witnessed the deplorable
behavior of stations deliberately providing QRM on their call frequency
*Same here on #679 and has been like it for a year or more I think?
the fix is to run OPER all the time which is not helpful if you need to use
a tuner...:-)
73
*
On 23 September 2012 18:23, Richard Squire - HB9ANM hb9...@bluewin.chwrote:
That's right, Fred and Mike - This is exactly what I
*Joe,
Thanks for taking the time to conduct the tests.
Now that I understand what the rationale for the request to Wayne, I am of
the same mind also.
As I use the FM filter rarely I would also be able to free up a filter slot
and add an additional narrow filter which would be good for me also.
*Joe,
I have to ask, why?
In VK we have a 3Khz SSB BW written into our LCD's and yet some folks
consume 10Khz out here on a net which tears up a considerable amount of
spectrum.
What advantage do you see to widen the ESSB?
Not sure I follow your thoughts here, hence the question Joe.
73
*
On
:00 AM, Gary Gregory garyvk...@gmail.com
wrote:
I have to ask, why?
Using the FM filter does no widen ESSB or AM ... the bandwidth of
those modes is determined by the DSP modulator. The only thing
the 8.215 MHz crystal filter does is to provide some additional
protection against
*Has anyone got a K3 with the 2M and 70cm transverters got any comments
plus or minus as to performance.
I don't have them myself but a VK is about to order his K3 and will be
adding these transverters.
His interest is HF, 2 and 70cm and not 6M.
I thought I would ask here as I don't know what
*Art
The Auxbus cable without the adapter carries the PTT function also so maybe
that is also an issue that FW may not be able to change?
With the addition of the KAT500 into the K-Line this may become even more
difficult as the Auxbus cable will run from the K3 to the KAT500 and then
to the
*AND mouse clicks...:-)
73
*
On 15 September 2012 06:46, Eric Swartz WA6HHQ - Elecraft e...@elecraft.com
wrote:
Let's end this thread (regarding policing of on air tx signals etc) now in
the interest of reducing list noise level.
73,
Eric
Elecraft List Moderator
www.elecraft.com
_..._
*I have often suspected this happens. Some of the dirtiest signals found on
the band are contest stations we hear in VK from EU regions.
Maybe we should make it 59 for good, 19 for bad...:-)
73
*
On 14 September 2012 14:51, Vic K2VCO k2vco@gmail.com wrote:
This is very non-representative
*I wonder if the original request for information was a result of having
CW+SSB turned ON, AND the K3 was in split?
I just checked and mine does the same thing.
With split active, CW+SSB does not allow the K3 to TX, the Red LED remains
OFF but the SPlit indicator LED is lit and the K3 LCD
*Tony,
I have worked them on 4 bands so far bbut I have noticed they continually
ask for a partial call sign to be repeated. By this I noticed they will ask
the station ending in Tango your call? and they do this with almost every
call and most of the time on all bands.
Listening to the pileup I
, 2012, at 1:47 PM, Gary Gregory wrote:
*Tony,
I have worked them on 4 bands so far bbut I have noticed they continually
ask for a partial call sign to be repeated. By this I noticed they will
ask
the station ending in Tango your call? and they do this with almost
every
call and most
*Interesting discussion locally here in VK.
Is there any advantage in having the Copper ground rod surrounded by
concrete over having the rod driven 6 feet straight into the earth?
Hope this doesn't get too far off topic or develop into a prolonged
discussion but I realised I didn't know the
*RFOTFL and can't get up
*
On 3 September 2012 01:54, Rick Johnson w3bi.r...@hotmail.com wrote:
CookieJust wait until 2014 when you become a Unit.Unit defined as a
person over 70 to be made comfortable.I can hardly wait.
73,Rick W3BI
Date: Sun, 2 Sep 2012 08:14:16 -0700
From:
*Fred,
Just a TAP of the NR is all that is needed. No need to HOLD
73
*
On 3 September 2012 02:57, W6NEK w6...@socal.rr.com wrote:
Hi Fred,
I agree that the 15 step DNR control on the FT5000 is a very useful and
effective function. To gain access to the K3 NR settings you need to press
and
: Gary Gregory
To: W6NEK
Cc: elecraft@mailman.qth.net
Sent: Sunday, September 02, 2012 2:28 PM
Subject: Re: [Elecraft] K3 DNR
Fred,
Just a TAP of the NR is all that is needed. No need to HOLD
73
On 3 September 2012 02:57, W6NEK w6...@socal.rr.com wrote:
Hi Fred
*Tony,
Very wise advice, let's hope many take it...:-)
Gary
*
On 25 August 2012 14:24, Adrian vk4...@bigpond.com wrote:
This post would be the most sensible and helpful of the lot.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On
*Bill,
But then a K3/500 is nice to work with...:-)
*
On 24 August 2012 10:33, Bill K9YEQ k9...@live.com wrote:
This might force me to order a KAP500 soon. I don't need one, but
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
*I have watched the thread since it appeared and I do concur with Adrian's
thinking that if an Advanced menu was to be added then I see no issue for
the newer owners whether they be new to Elecraft or the hobby.
Protecting the 'innocent' should not mean standing in the way of
progress:-)
*Eric makes the point that this increase is cost related. Many
manufacturers do this of course and some just bring out a new model and the
additional cost pressures are built into the new model pricing.
Nice to see Elecraft continue the products currently being sold and just
make a cost
201 - 300 of 781 matches
Mail list logo