Make a cage using non-conducting mesh and pvc pipe to put over the antenna.
On Sun, Jun 7, 2020 at 09:16 Andy Durbin wrote:
> I use a home brew mag loop on 30 m band and work into Asia most mornings
> with it. The loop tunes to a near perfect match (1.00:1 SWR) but becomes
> instantly detuned
For some reason the combo seems to be stuck in "tune" mode. I've tried
restarting everything. Hitting tune on the rig and amp to get it to
cycle but nothing seems to be working. What am I overlooking?
Mike/aj9c
__
Elecra
Don, Are those all 8 ft ground rods driven vertical in ground without help
from a rock drill? Lots of rock in your area? Mike AC5P
On Friday, June 5, 2020, 03:10:11 PM CDT, W2xj wrote:
To my mind, false economy.
Sent from my iPad
> On Jun 5, 2020, at 3:36 PM, Don Wilhelm wr
ONLY 3 weeks? Mine started 7 April and is still going on. The longest
delays seem to be between our contact person and the "K3 expert".
Eliminating the middle man would help a LOT.
K3s #11894 Overdrive Faults
--
73,
Mike Cizek W0VTT
-Original Message-
From: ele
I have an odd problem and I'm not sure what I am doing wrong or what is
not set correctly.
The KX3 combo will not key my Acom 2000a. it was working 160-20 but now
seems to be fubar everywhere. I was using the rig/amp to generate 30-40w
out put to drive the big amp. I'm not sure what I have
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
demonstrate when the VFO needs to be rebuilt.
Tomorrow I will record an audio clip and post it.
Thank you again.
Mike
Kj4pom
On Sat, May 23, 2020, 23:32 Keith Onishi wrote:
> If you have strong pulse noise and noise blanker enabled for eliminating
> the noise, you may hear s
to
troubleshoot and check these issues?
Thank you
Mike
Kj4pom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
.
--
Mike Stokes
KK9V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
If the headphone speaker on the front had a normally-closed switch to route
the audio to the internal speaker when no phones are presten, and that is
stuck open, then this might be the effect.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraf
Kevin, your last comment is interesting. If you were the only crew member on a
spaceship on a deep space mission and tried to communicate with other stars,
would it be accurate to use the phrase “on the air”?
Thanks,
Mike NJ2OM
> On May 17, 2020, at 12:53 AM, kevinr wrote:
>
> Goo
for reading.
Mike, WM5DX.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
to the HD version.
Stay Safe and well.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Newer LDMOS amps don’t need much input power to develop full output. I am
building a 600W amp that needs about 3watts input. My KX3 will do
just fine. In fact I had an input attenuator made that will allow full
power from the KX3 drive the amp at full power. I also have a K3/10.
Mike
AI4NS
he P3 and the KPA500
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
With the bale extended. From desktop to the top of the cabinet at the
front panel 6 7/8". I am taking this measurement of my KPA1500, which
from pictures the K4 is the same height.
--
*73 De Mike*
*VE3YF
_/http://www.ve3y
ferent.
73, Mike, WM5DX.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please he
Would like to purchase one of the old K3/0 control heads. I’m looking for one
of the early versions, not the later K3/0-mini. Tnx.
Mike, W1MU
Michael J. Zak
m...@brookblue.com<mailto:m...@brookblue.com>
__
Elecraft mailin
After building a K1 and K2, extra parts were kept in the wonderful
Elecraft white boxes that meant radio building time! At looong last
when organizing those extras tonight, I found my K2/10 cover (later
replaced by the K2/100 cover). On the inside with a Sharpie is written
'Built by Mike
would like to get a Raspberry Pi computer to lighten the
load a bit, is that possible?
Thanks in advance
Future KG4MA (in mid june)
Mike
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=icon>
Virus-free.
www.avast.com
<https://www.avas
knowledge to serve as transmitter attendant (with Broadcast
Endorsement) at small broadcast stations. Memory plays tricks on us old
people. :-)
Mike / KK5F
-Original Message-
>From: Fred Jensen
>Sent: Apr 30, 2020 12:35 PM
>
>Why were code tests with groups almost always
t I wasn't sure about the ( * ) remaining on.
- Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: h
I got my Novice in 1972 in Boise Idaho. I don’t remember if there was an
FCC office there. Would they have gone to other cities to administer exams,
or did they have VE’s by then? My dad and I both tested together.
Mike
AI4NS
On Tue, Apr 28, 2020 at 12:49 Jim Campbell wrote:
> The time of wh
levels with the KPA100
installed.
Is that correct?
Thanks,
Mike NJ2OM
> On Apr 27, 2020, at 3:21 PM, Dave Van Wallaghen wrote:
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
On my P3, the beep function has been disabled. I cannot find a reference
to this in the manual. Has anyone else had this happen? Thanks.
--
Michael March K4QU
242 Clay Hill Dr.
Winchester, VA 22602
mikek...@gmail.com
540-662-4279 home
540-539-8500 cell
for the early May date when California will ultimately
decide if people can go back to work or will have to stay isolated
further. I think from reading everything hinges on that time frame.
In the meantime I guess we will have to wait and stare at pictures of
the K4 Front panel.
--
*73 De Mike
distancing thing) Multi Multi !
Mike VE9AA
RAC "Get on the Air on World Amateur Radio Day" Special Event is tomorrow!
Image of Certificate for RAC "Get on the Air on World Amateur Radio Day"
special event
For immediate release:
RAC “Get on the Air on World Amateur Radio
anged this"
from rig to rig over time. But I guess that leads to problems with
tipping off the competition and being a bit of a time sink, too!
73,
Mike ab3ap
On 4/17/20 4:15 PM, Wayne Burdick wrote:
Hi Mike,
I can probably scrounge up the original Lm and other specs for you.
Varactor capa
on it?
Tnx es 73!
Mike ab3ap, suffering cabin fever
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
of the filter capacitor. The DC bus
voltage reported by the K3 toggled between two values, 13.6 V and 12.7 V.
Motto of this story: even if an electrolytic doesn't appear bad externally,
suspect increased ESR and replace it.
73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com
Tnx Charlie
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I use a solid core door slab.
On Wed, Apr 15, 2020 at 12:47 Don Wilhelm wrote:
> When I built my operating desk, I made the top a full 36 inches deep so
> the face of the equipment is about 24 inches from the front. I also put
> the 2 pedestals on appliance dolly wheels so I can roll the desk
Hi:
Going out on a limb here, but does anyone have one of the Black Main VFO
cnc Knobs that used to be sold by 73cnc before closing business that is
not being used anymore. Any info would be greatly appreciated.
Tnx
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
I've used Polywatch for similar things in the past, but not on a PX3.
So check product details first, and maybe others here know of better.
Should your sign off be: adTHANKSvance ? :-D
73,
Mike ab3ap
On 4/14/20 1:14 PM, Chris Cox, N0UK wrote:
Can anyone recommend a safe polish or other
Thanks, all.
Thanks,
Mike NJ2OM
> On Apr 11, 2020, at 11:12 AM, Don Wilhelm wrote:
>
> Mike,
>
> That will not work with the K2. You will have to move to the K3 with a SubRX
> to do that effectively.
>
> 73,
> Don W3FPR
>
>> On 4/11/2020 11:04 A
Anyone have one available?
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
into this
and screw something up! Thanks for any tips if you have any.
73's to Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
maintenance.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of donov...@starpower.net
> Sent: Monday, March 23, 2020 13:59
> To: John Simmons
> Cc: Elecraft Reflector Reflector
> Subject: Re: [Elecr
Does anyone have a K3, not K3S manual they could email? I have a 57xx S/N
K3 and could use one
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
K3 S/N 57xx shows ERR PL1 when I change bands. It goes away after a couple
of seconds. I just built it.
Firmware is up to date.
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I dunno...my blinkers seem to work a LOT better after a healthy dose.
Although, I understand from a W4 that we don't get the good stuff up north;
they keep it all for themselves.
--
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Any available?
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
I need the pinout for the KXUSB cable, and can't seem to find anything on
Elecraft website.
I need to make an adapter to use the KXUSB cable with a K3.
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Try being 20 ft with sandy soil. Hot and humid.
On Mon, Mar 16, 2020 at 14:35 KENT TRIMBLE wrote:
> Which is why we Midwesterners are always at a disadvantage against you
> brethren in the Rockies and the Appalachians -- on two scores:
>
> 1) Height above sea-level is greater on a mountaintop
Also Maxgain systems
On Mon, Mar 16, 2020 at 14:00 Mike Harris via Elecraft <
elecraft@mailman.qth.net> wrote:
> DX Engineering probably has what you require for tubing repair. Given
> that you are repairing from the inside a thicker wall would be useful,
> easy with a length i
DX Engineering probably has what you require for tubing repair. Given
that you are repairing from the inside a thicker wall would be useful,
easy with a length inside the first repair length.
Regards,
Mike VP8NO
On 16/03/2020 14:06, Fred Jensen wrote:
#3
73,
Fred ["Skip"] K6DGW
Let us know how you get on with a solution Bill. Good luck with it!
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Nr4c
> Sent: Thursday, March 12, 2020 03:23
> To: elecraft
> Subject:
I am doing the alignment following the install, and I do not hear any
difference regardless of phase/gain, or preamp setting. There is also
no difference in S meter display either. I am using a piece of small
coax as the pickup antenna. Any suggestions?
Mike
AI4NS
New unused AUX Cable set Optional KPA500 or KPA1500 to K3S/K3. Wont play with
my older K3 version with serial port. Asking $30 shipped CONUS only.
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Thanks, Don. I was afraid that it was going to be a hardware issue. BTW, I am
using the USB to serial cable specifically made for the K2 by K1EL.
So I guess I need to find out out how to make a connection from the soundcard
to the mic input.
Thanks,
Mike
> On Mar 4, 2020, at 4:57 PM,
The WinKeyer is connected to the USB port on the tablet. There is a USB to
serial cable from the WinKeyer to K2. The cable was from K1EL who makes the
WinKeyer.
Thanks,
Mike
> On Mar 4, 2020, at 3:18 PM, Don Wilhelm wrote:
>
> Mike,
>
> Please describe your metho
What 'pins' do you have? Nickel-platted or gold pins?
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Leroy Buller
> Sent: Wednesday, March 04, 2020 10:33
> To: Elecraft Reflector
> Subjec
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
. I’m very pleased with the KPA/KAT functionality for
the Flex.
tnx
Mike / W5JR
Alpharetta GA
> On Feb 26, 2020, at 18:02, w6mob wrote:
>
> I am trying to run my Flex6600/ KPA500/KAT500 remotely.
>
> Does anyone know if it is possible to hook up a PC & a Flex to a KAT500
Hi Eric:
Yes please share some info with us all on the KPA1500. My KPA1500 has
been working flawlessly since I got it in early January.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http
hand
in glove with the cable companies because the cable customers report TV,
internet and telephone interference that is traced to power line arc
generators making ingress to the cable network - both utilities find the
weak points in their respective systems.
Mike, K8CN
--
Sent from: http
Anyone have link/s to INTERNAL photos of the KPA-1500PS? No find on google
image search.
73, Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
gt; On Feb 9, 2020, at 2:43 PM, Mike Short wrote:
> >
> > I’m assembling a K3 from an incomplete kit. It appears the top row of
> > buttons do not function properly. I can’t enter config,etc. there doesn’t
> > appear be any damage
I’m assembling a K3 from an incomplete kit. It appears the top row of
buttons do not function properly. I can’t enter config,etc. there doesn’t
appear be any damage to the FP board.
Ideas?
Mike
AI4NS
__
Elecraft mailing list
Home: http
the Collins KWM-2A MF/HF SSB/CW transceiver was adopted as
the RT-718/FRC-93 ...and it had very little protection from adverse
environmental conditions.
73
Mike / KK5F
-Original Message-
>From: Wayne Burdick
>Sent: Feb 8, 2020 12:23
>FYI:
>
>I asked one of our U.S. militar
Bill:
Sure hope so, or I will have some extra's For Sale...
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Why not call Tech support? They need to know that your radio was not
working out of the box. Let them help you. That is what they are there
for.
On 1/27/2020 8:59 AM, Gary K9GS wrote:
Thank you Vic and others.It's been a long time since I assembled my K3. I
reviewed the assembly
Hi:
Has anyone tried using one of the CNC Weighted Tuning Knobs on their
KPod. I rarely use the Main VFO on my K3S and thinking of moving the
aftermarket CNC knob to the Kpod. Good or bad would like to hear your
experience or recommendations.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
2020, at 5:17 PM, Mike VE3YF wrote:
Terry:
I am thinking "Wakeup on Lan". That feature is used in other applications,
maybe in the K4 as well.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mai
Terry:
I am thinking "Wakeup on Lan". That feature is used in other
applications, maybe in the K4 as well.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
uency regardless of where
it's being used."
From the Elecraft wed site:
The XG50 is a simple 49.380MHz signal source specifically designed for
use with the KX3 Extended VFO Temperature Compensation Procedure.
Regards,
Well that was not something I was expecting.
Oh well stuff like that happens everyday. Some things are beyond
Elecrafts control.
The way I see it, better to have a polished and proper rig, than one
that just full of bugs and issues. Get it right the first time.
--
*73 De Mike*
*VE3YF
Hi Dave:
I am having the same problem, get an error message failed to load amp
driver or something close to that. See mu post earlier this month. The
KAT500 and the KPA1500 remote programs work perfectly.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
the update. I will ask for a replacement config file and see if that fixes
the config save issue. Thanks for the quick post of the fix.
Mike
AC4ZQ
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home
were in
California and Canada during your fire season. Wonderful to see how we can
help each other in trying times.
Best wishes
Mike
VK1OO
-
Cheers
Mike
VK1OO (ex AC7MZ, VK1KCK)
K2: 2599
--
Sent from: http://elecraft.365791.n2.nabble.com
the latest version of remote software from the Elecraft site.
Any idea's would be greatly appreciated. Tnx.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
you need, and I think the Beatles said more or less the same
thing didn't they?? :-) (Assuming love == i/q.)
Happy 2020,
Mike ab3ap
On 12/31/19 2:47 PM, M. George wrote:
...With an API to the K4 and the I/Q output over
the LAN, applications that are much better at what they do
y...Morse is only a hobbyist's or historian's undertaking. I
personally found practice at Morse reception to be far more rewarding outside
the ham bands...but that option no longer exists.
Mike / KK5F
__
Elecraft mailing list
Home:
I am looking to buy an Elecraft KPA 500 amplifier. Needs to be in good
condition and perfect working order.
Please contact me at with info and asking price.
Thanks for reading,
Mike, WM5DX.
__
Elecraft mailing list
Home: http
Hi Keith,
Mine reads 4.96, so should it be set to 5.0 or left alone?
Thanks.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Keith Trinity WE6R
> Sent: Thursday, December 26, 2019 15:25
&g
Anyone else have their KPA-500 crash on power ON? All LED's briefly flash
then all dead. Main fuses good.
73, Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
1/4 mile driveway along a busy street right next to a major
interstate. So yea...
I hope you get your amp soon!
W0MU
On 12/25/2019 7:02 AM, Mike VE3YF wrote:
Update:
The KPA1500 left Elecraft on 20 Dec 2019, and arrived in Mount Hope,
Ontario 21 Dec 2019, with a guaranteed
I can imagine there are some real horror stories out there. I certainly
hope my amp isn't one of those horror stories.
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
On 25-Dec-19 19:01, Tox wrote:
Ha!
I have vivid memories of a $100k rackmount computer UPS dropped (on a
pallet) from high
Ouch.
I think at one point in time that Alpha Power was shipping their amps on
a Pallet to avoid damage.
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
On 25-Dec-19 18:35, richard gilley wrote:
When my Concept 2 rower was dropped off damaged; I was told by UPS that if a
heavy item
Hi Joe:
I think all the courier services have gone downhill. They have us where
they want and not much we can really do.
Merry Christmas Joe.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http
the
guaranteed delivery date, and by the looks of it, I might see it maybe
31 Dec, which is over a week after the promised date. They also don't
allow people to pickup their packages in person, tried twice.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
Hi Rose:
As a New Years Resolution, maybe carriers can get their act together. Ha
Ha Ha
Merry Christmas Rose...
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Christmas...
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
the excitement and joy in their faces when they learn that they passed
their exam is great.
So from where I sit, things are looking up!
-- 73 de Mike Flowers, K6MKF, NCDXC - "It's about DX!"
> On Dec 23, 2019, at 10:19 AM, KENT TRIMBLE wrote:
>
> Brethren . . .
>
> Keep in
. It is better to get it right the first time than to have to send
the rig back for upgrades or updates when a few extra months could have
solved that problem.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home
. One of the cold winter spells I will
get the KPA500 working with the KPA500 remote software.
I am going to check out Node Red or Red Node software one of those cold
days as well.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
Well I think that the KPA1500 has been out long enough that it is time
to bite the bullet and order one. Also ordered a K4D so big changes are
in store here, enough to keep the old mind active.
Merry Christmas to everyone
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
contributing as well.
Thank you.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of W0MU Mike Fatchett
> Sent: Saturday, December 14, 2019 08:12
> To: elecraft@mailman.qth.net
> Subject: Re: [
There are many ways to get enjoyment from Ham Radio, long distance
contacts being just one of them. I am a DXer and Contester by heart as
that is what I was exposed to as a young ham. I never got into the rag
chewing. I had a sched with my Grandfather weekly yet we still still
talked just
my IC7610.
Quite recently, I queried Elecraft about mods to the same K3, while
resources are still available, and had a comprehensive reply within a day.
73, Mike VE3GFN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Was that town in the Iron Range? And if so, could all the iron ore
deposits play a role?
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Jim Rhodes
> Sent: Tuesday, December 10, 2019 07:47
Never saw my post appear so am sending it again sans screenshot-Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: December 9, 2019 5:55 PM
To: 'Elecraft@mailman.qth.net'
Subject: Re: [Elecraft] K3 RIT & OFFSET ENGAGES A
I need a K3 TCXO module for my K3. Either type is fine with me.
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Yes Bill I used to drive a Alpha 86 with my K3S. Same as my 91B, just a
cable between the rig and the amp and no buffer etc required.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http
s for the info/advice. Always appreciate your no nonsense words and great
work.
73 de Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: December 5, 2019 6:23 PM
To: Mike Smith VE9AA; Elecraft@mailman.q
If I was to purchase a new (barebones) K3S today, what are the chances the
2nd receiver module, filters, 2m module and whatever else are going to be
available a year from now (when I can afford more) ?
Thanks !
Mike VE9AA
Mike, Coreen & Corey
Keswick Ridge
It's Gmail ...
http://blog.simplelists.com/gmail-solution-mail-sent-to-a-list-doesnt-show-in-inbox/
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> On Behalf Of Grant Youngman
> Sent: Monday, November 18
I've been having a problem with my installation that requires me to run the
KAT500 utility 'As Administrator'.
When I do this, it works. When I don't, it fails - hangs, actually.
Perhaps this is related?
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
>
Anyone had experience packing a KX3 in an Apache 1800 waterproof case from
Harbor Freight? Saw the case today at HF and looked like it would fit okay
for good transport protection.
73, Mike AC5P
__
Elecraft mailing list
Home: http
401 - 500 of 6306 matches
Mail list logo