I'm looking to purchase a P3SVGA.
Please let me know if you have one you'd like to sell.
73,
Bud W3LL
w...@arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Ted,
I responded via your email address. I have both P3 options available (P3SVGA
and P3TXMON).
Ed, W9EJB
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The people at the Elecraft booth at Hamvention told me that the SVGA card
for the P3 is out of stock, so I got on a waiting list while Elecraft sorts
out component availability matters and then maybe decides to do another run
of the item.
Meanwhile, does somebody out there have one to sell me?
Does anyone happen to have a P3SVA not being used? I'm looking for one.
TNX Will WC2L
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
w...@wc2l.com
__
Elecraft
After owning a K3 and P3 combo for several years, I put the P3SVGA (along
with a generic monitor and wireless keyboard) on my Xmas list a while
back... I had been perfectly happy with just the little P3 but the big
screen has exceeded all expectations for detail and responsiveness... In
addition,
Another benefit of the SVGA kit is that you can add an external keypad
to your K3 for triggering macros stored in the P3...
See:
https://www.nk7z.net/adding-external-keypad-k3/
I used this during the recent contest last weekend, and the only reason
I touched the radio was to tune it, or
I use the P3 with a 32 inch monitor and the display is excellent. I wouldn't
be without it.
73,
Alan. G4GNX
-Original Message-
From: Phil Hystad
Sent: Friday, March 30, 2018 12:31 AM
To: Elecraft
Subject: [Elecraft] P3SVGA and 20 inch Display
I am considering finally getting
.
73
Frank
W3LPL
- Original Message -
From: "Phil Hystad" <phys...@mac.com>
To: "Dennis Moore" <den...@mail4life.net>
Cc: "Elecraft" <Elecraft@mailman.qth.net>
Sent: Thursday, March 29, 2018 11:54:06 PM
Subject: Re: [Elecraft] P3SVGA
Dennis,
Thanks, so SVGA display has zero knowledge of the existence of the TX Monitor
information (not the RF Envelope and not the TX PEP/SWR windows).
Was there any sort of statement from Elecraft on the non-support of SVGA of the
TX Monitor? If there was I most likely missed it. If I
TX Monitor does not appear on the external monitor. If I really need to
look at it I check the P3, otherwise I'm always checking the external
monitor. It's worth it even without the TX monitor display.
73, Dennis NJ6G
On 3/29/2018 16:31, Phil Hystad wrote:
I am considering finally getting
I am considering finally getting the P3SVGA option for my P3. I do have a 20
inch HDMI display supporting a variety of resolutions. I plan to use with an
SVGA to HDMI conversion cable.
So, I am wondering how the P3 TX Monitor display shows up on the SVGA display.
I assume either not at all
' <tom...@videotron.ca>; Phil Hystad <phys...@mac.com>
Cc: Elecraft <Elecraft@mailman.qth.net>
Subject: RE: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?
I am using an older tv set that has hdmi and vga input. Iam using the vga and
it has fine enough resolution.
73,
Bill
K
ft <Elecraft@mailman.qth.net>
Subject: Re: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?
This is a valid point. I don't think all vga to hdmi converters are created
equally.
Also the svga output from the p3 at 1920x1080 doesn't work on any of my
monitors so it would be interesting to
smartphone.
Original message From: Phil Hystad <phys...@mac.com> Date:
2017-12-22 1:37 PM (GMT-05:00) To: Bill Johnson <k9...@live.com> Cc: Elecraft
<Elecraft@mailman.qth.net> Subject: Re: [Elecraft] P3SVGA Option: VGA to HDMI
adapter ?
Bill,
I did that (i.e
Of Phil Hystad
> Sent: Friday, December 22, 2017 12:03 PM
> To: Elecraft <Elecraft@mailman.qth.net>
> Subject: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?
>
> I am planning to get the P3SVGA Option board and I need a VGA to HDMI adapter
> cable. Does anyone have a recomm
7 12:03 PM
To: Elecraft <Elecraft@mailman.qth.net>
Subject: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?
I am planning to get the P3SVGA Option board and I need a VGA to HDMI adapter
cable. Does anyone have a recommendation of a cable that you use and works
well?
Thanks,
I am planning to get the P3SVGA Option board and I need a VGA to HDMI adapter
cable. Does anyone have a recommendation of a cable that you use and works
well?
Thanks,
73, phil, K7PEH
__
Elecraft mailing list
Home:
Hello
is there any way to add more frequencies to the screen?
I can see center and edges freq but I want to see any scale, for example I
have 7000 - 7010- 7020, but I want to see the marks for 7001, 7002, 7003,
7004, 7005...
Is this possible?
--
73,
Jorge
CX6VM/CW5W
K2UF,
Looking at your cut, you left off the ";" at the end of the command.
Each command needs the ";" at the end.
--
73's, and thanks,
Dave
For software/hardware reviews see:
http://www.nk7z.net
For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info
For SSTV help see:
What version of P3 firmware is installed? You need at least v. 1.57.
Alan N1AL
On 03/01/2016 12:59 PM, Joe K2UF wrote:
Trying to use the commands in the P3 pgmrs ref. If I enter a command into
the P3 utility or the K3 utility app they work fine. If I try to place one
of the P3 commands
Trying to use the commands in the P3 pgmrs ref. If I enter a command into
the P3 utility or the K3 utility app they work fine. If I try to place one
of the P3 commands (ie #SPN000500 ) in one of the P3 slots using the
attached keyboard it does not work. I do not have a problem using any of
I'll take it Paypal?
Tex
ka5y
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-For-Sale-tp7606416p7606423.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
The P3SVGA has been spoken for.ThanksBob W6VY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I have a P3SVGA for sale. I purchased a used P3 with this installed and have
no need for it. (no room for a second monitor). Mounting screws and manual
included. The DC power cable is not included. I was purchased and installed
in May 2014 but was only used for a few hours (perthe original
Hi Doug,
Those resolutions do not have to match your monitor exactly. For
example, you can run 1440x900 on a monitor that is capable of displaying
1920x1080 or greater.Higher resolutions on the P3/SVGA will show
more detail (more pixels per span) but require slower update rates (more
I am contemplating adding the P3SVGA adapter to my P3. One thing that
bothers me is that of the 4 supported resolutions, only one is commonly
available and not very often in smaller monitors that are convenient to
add to the already crowed station desk. Most small monitors are
1366x768. The
Hi Jim,
The first thing to try is to perform a parameter reset on the P3. With the
P3 on, hold down the MENU and PWR keys. Note, this will reset any function
keys you may have set up.
The frame rate will slow when the span is very narrow. For example at 2 KHz
span, the frame rate will slow
That worked!
Thanks!
jim ab3cv
On Mon, Nov 10, 2014 at 12:13 PM, Paul Saffren N6HZ pa...@elecraft.com
wrote:
Hi Jim,
The first thing to try is to perform a parameter reset on the P3. With the
P3 on, hold down the MENU and PWR keys. Note, this will reset any function
keys you may have
Joe,
I don't want to be confrontational and I greatly value your engineering
mind, but I'm quite certain that the wide K3 NB DOES affect the P3
display. I work a lot of JT65 on 6M, and there are several strong
signals (not of overload magnitude) near me. The NB DOES create
artifacts that
Jim,
with the pick-off point clearly *before* the noise gate, the NB can
not possibly provide any *blanking* to the P3. There may certainly
be artifacts due to changes in the impedance (loading) seen by the
P3, but that is a *big difference* from real banking.
Please study the schematics
You're both right, he mused, studying his own schematic (and inexplicably
referring to himself in the third person).
The KNB3 *is* downstream of the pick-off point for the P3. But in the presence
of very strong signals and with the KNB3 set to a long gate time, some of the
gating artifacts
The only time, I have had a resolution to an issue is when a well
know person from Microham, reported the issue in a much more, how can
I say, forward way that I do, and it was resolved within a month.
Elecraft is quite responsive (issues a fix) if an issue is serious.
However, I have always
And that's why people came with Open Source concept.
Historically, proprietary platforms have been eliminated or converted to either
completely Open Source or partially, similar to what Apple did:
the platform is semi-open in the sense that nothing goes to Production without
their validation and
My complaint is that I feel deceived about this product(P3SVGA add-on).
Looking at the description I am lead to believe that the P3SVGA add-on board
will allow me to view what I am seeing on the P3 on a large external screen.
That is the way I read the ad. But this is NOT the case. I feel
Are you complaining because you see *more* info on
the SVGA than on the P3? Or is this your NB issue?
Has the NB on the P3 gone beyond the beta stage?
If not it cannot be advertised at all. Anyway, I
seldom use it with the P3.
Phil W7OX
On 8/15/14, 7:24 AM, XE3/K5ENS via Elecraft wrote:
I am saying I see signals on the P3 with the NB on that I can not see on the
P3SVGA screen.
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060p7592118.html
Sent from the Elecraft mailing list archive at Nabble.com.
Has the NB on the P3 gone beyond the beta stage?
Yes, it is in production firmware 1.29 although the Owner's Manual
(Rev D) and Programmer's Reference (Rev A4) do not appear to have
been updated to include the feature.
73,
... Joe, W4TV
On 2014-08-15 10:45 AM, Phil Wheeler wrote:
Are
: Friday, August 15, 2014 9:14 AM
To: Joe Subich, W4TV
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3SVGA
And that's why people came with Open Source concept.
Historically, proprietary platforms have been eliminated or converted to
either completely Open Source or partially, similar to what
Well, you just described my day job. We sell hardware (Ethernet
controllers) and the driver I support is open sourced Linux and FreeBSD.
There are also closed-source versions but I only do backup-support on
those.
Yes, it would require more support on Elecraft's end but it wouldn't be
impossible
On 8/15/2014 7:24 AM, XE3/K5ENS via Elecraft wrote:
The ad needs to be changed to reflect this point.
The P3SVGA display is NOT a copy of the P3 screen. I know the digital
decoding is added. By the way has, for me using a K3 for 6 years, never
worked well enough on weak signals to be
Jim,
You are mixing 2 completely different items. The decoding of the digital
signals I could care less how that works. I don't use that function. I am
saying that on the P3 screen with the NB on I can see weaker signals than I
can see on the P3SVGA screen. The noise blanker does not work on
On 8/15/2014 9:36 AM, XE3/K5ENS via Elecraft wrote:
I am
saying that on the P3 screen with the NB on I can see weaker signals than I
can see on the P3SVGA screen.
http://www.elecraft.com/P3/p3.htm Scroll down to see a photo of how the
SVGA compares to the P3 screen.
Repeating my advice --
Jim,
The NB in the P3 is a completely different animal than what is used in the
K3. It is more of a visual aid and does not need to worry about the audio.
My understanding of this NB is that if used on the audio all you would hear
is sounds like a typewriter. The NB in the P3 does an excellent
On 8/15/2014 10:14 AM, XE3/K5ENS via Elecraft wrote:
I hate how every time someone
makes a comment that they think is negative to Elecraft the person making
the comment is flamed.
Who is flaming whom? Certainly not me -- I'm simply trying to help you
and others get the most from your gear.
Jim,
And there is nothing on the P3 webpage that would lead me to believe that
the display on the SVGA screen would differ, other than resolution, than
what is seen on the P3 screen.
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060p7592136.html
Also -- the K3 NB is really two NBs, and the one that looks at
broadband noise DOES work in both the P3 and P3SVGA.
Jim, that information is incorrect. The K3 NB can not possibly have
any impact on the P3 or P3SVGA as the IF pick-off is at the output
of the first mixer - *before* any noise
I use Tom ' s software. It is stable and controls the elecraft line like no
other. There are a few issues that he has told us about and did say
elecraft was notified and later I recheck and he did not hear back from
them.
This software should be on the elecraft site. It controls the K-Line as
well
I am sorry, I found the P3SVGA add on to be quite adequate. Perhaps you
can share your findings of the short fall.
I may be in error, but I believe the P3SVGA is operating on the data
from the P3 FFT. I expect a panadapter to display what is impinging my
antenna, not the result of
Another clueless replier...
Have you even tried the NB in the P3 vs the SVGA screen. Obviously not.
Sounds like your ideal radio would have no NB, NR, and heck no AGC. Just
noise,noise,noise
Keith
--
View this message in context:
: Fri, 15 Aug 2014 09:36:10 -0700 (PDT)
From: XE3/K5ENS via Elecraft elecraft@mailman.qth.net
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3SVGA
Message-ID: 1408120570747-7592124.p...@n2.nabble.com
Content-Type: text/plain; charset=us-ascii
Jim,
You are mixing 2 completely different items
Clueless??
1) The radio is to select a specific signal and provide the tools to
decode it. It very well could be to determine the source of undesirable
noise. Those tools include noise blanking, noise reduction, agc,
selectable filtering, a panadapter, etc. Each tool applied as
: Friday, August 15, 2014 2:45 PM
To: Tom Blahovici
Cc: elecraft@mailman.qth.net; Eric Swartz WA6HHQ - Elecraft
Subject: Re: [Elecraft] P3SVGA
I use Tom ' s software. It is stable and controls the elecraft line like no
other. There are a few issues that he has told us about
and did say elecraft
On 8/15/2014 11:29 AM, Joe Subich, W4TV wrote:
Jim, that information is incorrect. The K3 NB can not possibly have
any impact on the P3 or P3SVGA as the IF pick-off is at the output
of the first mixer - *before* any noise blanker gate.
Joe,
I've never studied the schematic or signal flow in
/I appreciate the alert to the existence of the P3 NB. I last updated
firmware about six months ago, and it was not in that version. It does,
indeed, work pretty well/.
*And it would be great if it worked with the P3SVGA but it does nothing on
that screen.
*
Keith
--
View this message in
Agreed. This is on the firmware task list for the engineer working on P3 and
PX3 code.
73,
Wayne
N6KR
On Aug 15, 2014, at 2:23 PM, XE3/K5ENS via Elecraft elecraft@mailman.qth.net
wrote:
/I appreciate the alert to the existence of the P3 NB. I last updated
firmware about six months ago, and
I often study the screen of my P3, which DOES show reduction of noise
when the wider NB is active. 2-4 dB is typical for the types of noise
for which it is effective.
2 - 4 dB may be due to upsetting the impedance at the IF feed but given
the circuit topology it is not possible for the NB to
Since his last release for F/W upgrade to the P3SVGA card was on February
27th, 2013 we should be careful holding our breath on the next release. hihi
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060p7592158.html
Sent from the Elecraft mailing list
With the exception of figuring out how to deal the 'web cam' or 'capture
card' needed to view the P3, I have been seriously considering Win4K3.
Unfortunately now that I know the 'Mothership' is resistant to working
with Tom, I will wait until I hear that has changed before I take the leap.
I must be the only one that has bought a P3 with the SVGA board. If no one
else is interested in the NB like the P3 normal display.
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060p7592086.html
Sent from the Elecraft mailing list archive at
I doesn't have anything to do with one of their new products, so there
is no reason to waste electrons asking or commenting.
They will get around to it when and if they ever decide to, or are
allowed to, work on something P3 or K3 related, and no amount of asking
will change that.
Sam
On
I have a P3, my second. The first one had the SVGA card and I have not
missed a noise blanker at all, and I live in a garden home community
with lots of noise from every imaginable source. A noise blanker is only
effective against high rise time impulse noise I wonder if it would
truly be
my previous reply was the short answer, here is the long answer:
reference:
http://www.mail-archive.com/elecraft@mailman.qth.net/msg171471.html
to quote Wayne from 7/10/2014 7:55 PM
quote
Hi all,
Our firmware task lists are sorted by priority. Determination of
Priority is democratic to some
Hi Keith,
I might be interested but I didn't bother downloading the firmware because I
never look at the P3 screen, only the SVGA screen. How well does it work and
weren't there some caveats mentioned in the release notes?
73,
Mike K2MK
XE3/K5ENS wrote
I must be the only one that has bought
Ok, now I am going to be the “squeaky wheel”.
I am the author of Win4K3Suite. With a customer base of a few hundred users
(not one or two users) I have numerous times reported bugs and deficiencies in
the Elecraft API through the elecraft support channels as well as directly to
Wayne and have
Any info on when we might see the NB for the SVGA board??
Keith
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7592060.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
Also make sure you are powering the P3 from an adequate power supply (at least
1 A). The SVGA option adds enough current that the 12 V output on unmodified
older K3s may not be able to supply enough current for proper operation of the
P3 and SVGA together.
73,
Eric
elecraft.com
_..._
On
Hi Phil,
It sounds like the SVGA board is not powering up, or there is something
wrong with it. Be sure to check the 40 pin connector between the P3 I/O
board (serial board) and the SVGA board, and make sure it is aligned
properly and that all pins are inserted correctly. Then look at the 40
Installed P3SVGA in a P3 this weekend.
The P3 starts up, says waiting for SVGA and shuts off.
Any idea what's up?
thanks,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Look carefully at the insertion of the P3SVGA board in the P3 board. Also, have
you installed the FW on the P3 to utilize the SVGA addition?
Sent from my iPhone
...nr4c. bill
On Jun 22, 2014, at 8:46 PM, Phil Theis p...@k3tuf.com wrote:
Installed P3SVGA in a P3 this weekend.
The P3 starts
Must the firmware be installed first? If it would start now, I'd do
the firmware.
Phil
On 6/22/2014 9:19 PM, Nr4c wrote:
Look carefully at the insertion of the P3SVGA board in the P3 board. Also, have
you installed the FW on the P3 to utilize the SVGA addition?
Sent from my iPhone
...nr4c.
I am thinking of adding the SVGA option to my K3-P3. It would be neat to have
a single wide screen monitor running split screen, with the P3 display on one
side and a logging/spotting program on the other - or if necessary, alternate
screen keyed from the computer keyboard. Anyone know if
Ted,
The SVGA option for the P3 requires a dedicated monitor screen. It
cannot be shared with the output of a computer.
73,
Don W3FPR
On 4/8/2014 7:43 AM, Dauer, Edward wrote:
I am thinking of adding the SVGA option to my K3-P3. It would be neat to have
a single wide screen monitor
Hi Ted,
I don't have split screen but I do have my external monitor running dual
purposes. Most LCD monitors have double or triple inputs these days. And
many PCs have 2 or more video outputs. You hook up the P3 SVGA card to the
VGA input of the monitor and you hook up the DVI monitor input to
You know what I would buy in an instant? The P3-SVGA card but without the P3
chassis. If that was available as an add-on to the K3. Bring-your-own-display
sort of an option. Have a VGA or dvi or maybe even HDMI (much smaller) in the
back of a K3.
Is that possible?
Slava Baytalskiy
Cc: Dauer, Edward eda...@law.du.edu; elecraft@mailman.qth.net
Sent: Tuesday, April 08, 2014 5:03 PM
Subject: Re: [Elecraft] P3SVGA Option - Split Screen?
You know what I would buy in an instant? The P3-SVGA card but without the
P3 chassis. If that was available as an add-on to the K3.
Bring-your
I previously used my Logitech K360 wireless keyboard with my P3SVGA but then
was trying it with my computer. I unpaired the keyboard with the Logitech
Unifying receiver on the computer and now can't get it to pair with the
Unifying receiver plugged into the SVGA USB port.
I know the port works
Hi Jim,
The P3/SVGA sees the K360 keyboard as simply a 'keyboard' and doesn't know
about pairing.Have you tried removing and replacing the batteries in the
keyboard yet? Looking at mine, there aren't any buttons inside the
keyboard to push. Maybe you have to remove the unifying remote
I've moved two K360s back and forth between several devices, including
the P3/SVGA, many times. Nothing special was required; each pair
hooked up again when plugged into the new device.
73,
matt W6NIA
On Fri, 28 Mar 2014 13:09:37 -0700 (PDT), you wrote:
Hi Jim,
The P3/SVGA sees the K360
Hi Paul,
I moved the Unifying Receiver from the SVGA and connected it to a computer
that was new to any Logitech receiver. The Logitech program showed the
receiver was still paired to the K360. I unpaired it and tried it again in
the SVGA but no joy.
I plugged a corded K120 KB into the SVGA,
BTW, two days ago it was $4 cheaper and shipped free with Amazon Prime!
73, Jim N7US
-Original Message-
Hi Paul,
I moved the Unifying Receiver from the SVGA and connected it to a computer
that was new to any Logitech receiver. The Logitech program showed the
receiver was still
You were right, Paul. I had unpaired it before when removing the receiver
from the computer, thinking I'd restore it to the out-of-box condition.
Pairing it in the computer and then moving it did the trick.
A nice feature of the K360, besides the wireless operation and its compact
size, is the
Hi,
I really appreciate the higher resolution and detail available using the
P3SVGA, but I have no room for a separate monitor in my setup. I have
been using the monitor's input switching to see the P3SVGA's display but
it is clumsy and slow, and I want to be able to see my logging software
Hoyt hh...@mebtel.net
Date: 28/02/2014 11:18 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: [Elecraft] P3SVGA windowing
Hi,
I really appreciate the higher resolution and detail available using the
P3SVGA, but I have no room for a separate monitor in my setup. I have
been using
Hi Rick,
The feature to save and restore keyboard messages and macros is already
implemented in the current version of firmware (1.26/1.16) Located in the
SVGA sub-menu are Usav and Urst which save and restore the
messages,macros and Ctrl-Alt-S settings. Simply remove the keyboard and
insert
Thanks Paul,
I missed that.
Rick
K6LE
On 4/15/2013, at 8:35 , Paul Saffren N6HZ pa...@elecraft.com wrote:
Hi Rick,
The feature to save and restore keyboard messages and macros is already
implemented in the current version of firmware (1.26/1.16) Located in the
SVGA sub-menu are Usav
and down arrow keys controlling
frequency in ten Hertz steps.
73, Bob N7ZO
-Original Message-
From: Bob [mailto:k...@ptd.net]
Sent: Sunday, April 14, 2013 9:53 AM
To: Wright, Robert
Subject: Re: [Elecraft] [P3SVGA] Missing Fn key display on P3 after installing
P3SVGA
Hi Bob
Bob,
While I have a few keyboard macros pre-programmed I haven't been near as
diligent as you have. Now you have me motivated to basically copy your
approach and also to set up several K3 Macros.
The question comes to me though about the possible volatility of these macros.
I wonder if the
I just installed the P3SVGA option and am having a lot of fun programming the
text message and K3 macros. But I seem to have lost the display of the P3
function keys assignments that I normally see at the bottom of the P3 LCD
display. Is this a setting I have screwed up or a bug?
P3 ver 1.26
It shouldn't affect the function key assignments. You do have the FN
labels turned on with the LABELS key (hold key), right? The only
other thing I can suggest is maybe the EEPROM wasn't read properly after
cycling power for some reason. You could try cycling power again.
Alan N1AL
On
@mailman.qth.net
Subject: Re: [Elecraft] [P3SVGA] Missing Fn key display on P3 after installing
P3SVGA
It shouldn't affect the function key assignments. You do have the FN labels
turned on with the LABELS key (hold key), right? The only other thing I can
suggest is maybe the EEPROM wasn't read
I use a 20 inch wide screen wall mounted. I have 4 monitors on my wall. 2 for
my computer, one for the P3 and one for my XYLs computer. They are all tied in
so either of us can use the radio with computer control. Station pic at my
QRZ.com page
barry
NF1O
I use an old 15 inch 1024 x 768 LCD about six inches further than an
arms length
from my eyes which does a great job.
73,
Tom
Amateur Radio Operator N5GE
Same here - a 15 inch 1024 x 768 LCD, but also with the stand removed so
the screen sits directly on top of the K3. That places the K3 and
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph Carter
Sent: Monday, March 25, 2013 6:54 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] P3SVGA advice please
Am thinking of adding the P3SVGA to my P3 - will need to get
These days, it might be less expensive to find a small flat-panel TV
set that has VGA input. However, on of the big consumer electronic
sites sent me an email today hawking a 20 LED monitor for $99. That
seems like a modest price.
73 de Ray
K2ULR
-
From: Tom H Childers
To: Harlan
Cc: Elecraft@mailman.qth.net
Sent: Monday, March 25, 2013 8:01 PM
Subject: Re: [Elecraft] P3SVGA advice please
I use an old 15 inch 1024 x 768 LCD about six inches further than an
arms length from my eyes which does a great job.
73,
Tom
...@n5ge.com; Harlan
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3SVGA advice please
I am limited for space. I have a small desktop computer with a 15 inch LCD
monitor. I bought an inexpensive VGA A/B switch and a couple VGA cables on
eBay. I share the monitor between the P3 and computer
Joe,
I have a 20 inch and it is plenty good for these 62 year old eyes. ;)
Sent from my Verizon Wireless 4G LTE DROID
Joseph Carter j...@case.edu wrote:
Am thinking of adding the P3SVGA to my P3 - will need to get a new monitor too.
In reading the eham reviews etc I am wondering about what
Am thinking of adding the P3SVGA to my P3 - will need to get a new monitor too.
In reading the eham reviews etc I am wondering about what size monitor folks
might recommend.
FYI I am 63 years old and eyes still pretty good other than the small print
conspiracy.
Desk space not really an issue.
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joseph Carter
Sent: March-25-13 8:54 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] P3SVGA advice please
Am thinking of adding the P3SVGA to my P3 - will need to get a new monitor
too.
In reading the eham reviews etc I
Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: Joseph Carter
Sent: Monday, March 25, 2013 4:53 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] P3SVGA advice please
Am thinking of adding the P3SVGA to my P3 - will need to get a
new monitor too.
In reading the eham reviews etc
1 - 100 of 329 matches
Mail list logo
