[Elecraft] LP-PAN 2 For Sale

I have a LP-PAN 2 Software Defined Panadapter for a K3 with Xonar U7 MK II soundcard for sale. Plans have changed. Please contact me off-list at n...@comcast.net mailto:n...@comcast.net Dave N8AG __ Elecraft mailing list Home:

Re: [Elecraft] LP-PAN 2 Panadapter with Z10000 for K2

Hi Paul, I'm sorry. I haven't received any emails except this one. The LP-PAN is available. I'll hold it for you until you can make a decision. Please let me know what you posted in the other emails so I can answer any questions. Use this gmail address until I can figure out what happened

Re: [Elecraft] LP-PAN 2 Panadapter with Z10000 for K2

Eric I am interested and have emailed you a couple of times off list as you suggested. If the items are sold please let me know. Paul W6PNG/M0SNA www.nomadic.blog > On Apr 6, 2019, at 3:40 PM, EricJ wrote: > > Originally an LP-PAN, but upgraded to LP-PAN 2. > No

[Elecraft] LP-PAN 2 Panadapter with Z10000 for K2

Originally an LP-PAN, but upgraded to LP-PAN 2. No extraneous holes or mods. Includes: LP-PAN 2 Z1 buffer amp optimized for K2 BNC-SMA cable to connect K2 to LP-PAN Manual pdf's on DVD Photos here: https://photos.app.goo.gl/zRkmEw7V8ztjrALM8 See telepostinc.com for easy installation,

Re: [Elecraft] LP-PAN 2 and P3

: elecraft@mailman.qth.net Asunto: Re: [Elecraft] LP-PAN 2 and P3 I have an additional question in addition to Jorge. I recently installed my LPAN2 (I do not have a P3). My question is that can I run my LPAN2 at the same time I run N1MM+. I tried and got a port conflict the with K3. Also, I run

Re: [Elecraft] LP-PAN 2 and P3

LPB2 is a version of LP-Bridge that is intended for use with transceivers other than the K3 (K3S and KX3). If you are running a K3, LP-Bridge (not LPB2) will provide better performance because it buffers some of the K3 information and thus reduces the need for frequent access to the K3 for

Re: [Elecraft] LP-PAN 2 and P3

Subject: [Elecraft] LP-PAN 2 and P3 Hello I am looking for information about LP-PAN 2 and the P3 SVGA Not understand at all about them, are the same? May I use LP-PAN 2 without P3 or there´s any benefit using both LP-PAN 2 and P3 Or is better to use just the P3 SVGA Thanks, Jorge

Re: [Elecraft] LP-PAN 2 and P3

David, LP-Pan is just a piece of hardware, and has no connection with COM ports. However, the software application that shows you the panadapter display on the computer will usually use a COM port to indicate the frequency on the display and may have some other rig control functions. Note that

Re: [Elecraft] LP-PAN 2 and P3

David, I'm using LPB2 (LP Bridge) to handle the serial port access. FWIW, I use DX Lab Commander for multi rig use. That works especially well for allowing either rig (K3 or Flex 6300) access control to the KAT-500 tuner as well as logging software, fldigi, etc. Ken WA8JXM On 10/15/15

Re: [Elecraft] LP-PAN 2 and P3

Jorge, I went the cheapest route, and it works quite well. I use a softrock lite II which cost $21. I needed a stereo sound card for my laptop, so I ordered a USB sound card for around $14 from Amazon. I later changed to a Xonar U5 sound card, which cost $60 after a $10 rebate. It is a better

Re: [Elecraft] LP-PAN 2 and P3

On Wed,10/14/2015 11:33 PM, David Gilbert wrote: One that is dear to my heart would be an application that quantifies splatter and key clicks from crummy signals. Properly adjusted, the P3, especially with the SVGA adapter, can do an excellent job of displaying wide, dirty signals. Here are

Re: [Elecraft] LP-PAN 2 and P3

From my point of view there is another consideration at hand here. A hardware interface like LP-Pan that provides I-Q signals to a PC sound card allows the use of other SDR-type software like CW Skimmer, and while CW Skimmer may not be of interest to everyone I believe other third party

Re: [Elecraft] LP-PAN 2 and P3

craft-requ...@mailman.qth.net wrote: Message: 24 Date: Thu, 15 Oct 2015 06:10:13 -0400 From: "David Smith"<dlsm...@harlanonline.net> To:<elecraft@mailman.qth.net> Subject: Re: [Elecraft] LP-PAN 2 and P3 Message-ID:<01d10731$aeae5e70$0c0b1b50$@harlanonline.net> Conten

Re: [Elecraft] LP-PAN 2 and P3

: [Elecraft] LP-PAN 2 and P3 Only one program can connect directly to a serial device like the K3. You need to use a port sharing app like LP-Bridge or several others out there to allow this to happen. LP-Bridge in this case connects to the K3, and lets you create "virtual" ports for the S

Re: [Elecraft] LP-PAN 2 and P3

OK ... thanks for the clarification. Dave AB7E On 10/15/2015 1:13 PM, Alan wrote: On 10/14/2015 11:33 PM, David Gilbert wrote: p.s. As far as I know, the P3 has to generate its own I-Q signals internally. I've never understood why Elecraft didn't provide them as buffered outputs from

Re: [Elecraft] LP-PAN 2 and P3

Reflector Asunto: Re: [Elecraft] LP-PAN 2 and P3 Jorge, There is a good comparison chart for the LP-PAN vs P3 on the telepostinc website (http://www.telepostinc.com/). I recently got my LP-PAN working with NaP3. No one has commented about pc requirements. I originally tried to use LP-PAN

Re: [Elecraft] LP-PAN 2 and P3

I second the option of sticking with W7. W10 does a lot of things that I just don't need. Why fix what isn't broken. ...robert On 10/15/2015 14:18, Don Wilhelm wrote: Jer, Try HRD version 5 which does not use unicode. Or use something other than HRD. HRD does a lot of polling of the K3 and

Re: [Elecraft] LP-PAN 2 and P3

On 10/14/2015 11:33 PM, David Gilbert wrote: p.s. As far as I know, the P3 has to generate its own I-Q signals internally. I've never understood why Elecraft didn't provide them as buffered outputs from the P3 to make it more versatile. Somebody please correct me if I'm wrong here. The P3

Re: [Elecraft] LP-PAN 2 and P3

o use N1mm like Davis, hope I can do it > > Thanks, > Jorge > > > -Mensaje original- > De: Elecraft [mailto:elecraft-boun...@mailman.qth.net] En nombre de David > Smith > Enviado el: jueves, 15 de octubre de 2015 07:10 a.m. > Para: elecraft@mailman.qth.net > A

Re: [Elecraft] LP-PAN 2 and P3

I was thinking more along the lines of an app that would calculate an actual numerical figure of merit. Something along the lines of: * you tune to a signal of interest * the app breaks up the surrounding spectrum into 100 Hz windows * the app measures the magnitude of the energy in each

Re: [Elecraft] LP-PAN 2 and P3

On 10/15/15 12:46 PM, Steve Lund wrote: You'll also want a large monitor (or put a dual monitor card in the pc) as once you get hooked on LP-PAN, you'll always have it running! You don't really need another monitor card on many newer computers. Many newer computers have both VGA and DVI

Re: [Elecraft] LP-PAN 2 and P3

Jer, Try HRD version 5 which does not use unicode. Or use something other than HRD. HRD does a lot of polling of the K3 and ties up computer resources. LP-Bridge currently does not support Unicode, but I understand Larry is working on it. OTOH, you may want to revert to Windows 7 where

[Elecraft] LP-PAN 2 and P3

Hello I am looking for information about LP-PAN 2 and the P3 SVGA Not understand at all about them, are the same? May I use LP-PAN 2 without P3 or there´s any benefit using both LP-PAN 2 and P3 Or is better to use just the P3 SVGA Thanks, Jorge CX6VM/CW5W --- El

Re: [Elecraft] LP-PAN 2 and P3

Jorge, Don has given you a good summary of the two devices. When considering the PC path you should be aware that there is more opportunity to receive and display a much wider bandwidth than either the P3 or LP-Pan can provide. At the moment both the P3 and LP-Pan are limited to 200kHz and

Re: [Elecraft] LP-PAN 2 and P3

Jorge, The goal of both the P3 and LP-Pan (with PC software) is the same -- to give you a panadapter display of the IF output of the K3 (K3S) or any other radio. The P3 does it by direct digital means and displays the resulting spectrum and waterfall on the native screen. With the SVGA

[Elecraft] LP-Pan for K3 - ew in box for sale

Factory assembled LP-PAN for the Elecraft K3 for sale. Serial number 00712. I purchased this new and never used it. New in box. Power cable included. $1149 plus $10 USPS priority mail shipping. PayPal preferred by will take personal check or credit card. Photo on eHam Classifieds 73 Bill AA7XT

Re: [Elecraft] LP-Pan for K3 - ew in box for sale

$149 not $1149 for LP-Pan K3!!! Sorry about that. Bill AA7XT On Fri, Feb 28, 2014 at 2:40 AM, William Hein bill.aa...@gmail.com wrote: Factory assembled LP-PAN for the Elecraft K3 for sale. Serial number 00712. I purchased this new and never used it. New in box. Power cable included. $1149

Re: [Elecraft] LP-PAN 2 For Sale

Steve. I would like to purchase the LP-PAN2 that you listed for sale. Give me your mailing address and I will get the payment out to you in the next mail. Or, if you prefer, I can pay immediately via paypal. 73, Charlie k3ICH __

[Elecraft] LP-PAN 2 For Sale

Selling LP-PAN 2 which is surplus for me. Just a few months old. Perfect. $200 - shipped USA CONUS. PayPal or Check Steve N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] LP Pan For Sale

I have a LP Pan set up for the K3 and a Creative Labs EMU 0204 outboard sound card for sale. The LP Pan has the preamp mod installed. Audio cables from the Pan to the EMU only. $225 for both plus shipping. Contact me at k...@bellsouth.net

[Elecraft] lp pan and Yamaha UR22 sound card forsale also.

lp pan and Yamaha UR22 sound card forsale also. E mail me off the list. Thanks Ed Wp4o w...@tampabay.rr.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] LP Pan FS

This was sold but the person got sick and could not follow through. So... One LP-Pan with the attenuator option and setup for K3 for $150 shipped. I can include an EMU1212M PCI (NOT PCIe) soundcard for $225 shipped. Works fine running NaP3 on a WIN7 64 system. Tnx and 73 Greg - AB7R

[Elecraft] LP Pan for sale

Selling an LP Pan setup for K3 IF with the attenuator circuit. $150 shipped. Tnx and 73 Greg - AB7R 360-320-3436 ab7r at cablespeed dot com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] LP Pan for sale

I am seriously interested but must ask why you are selling? Ron K5HM. On Apr 1, 2013 9:00 AM, Greg a...@cablespeed.com wrote: Selling an LP Pan setup for K3 IF with the attenuator circuit. $150 shipped. Tnx and 73 Greg - AB7R 360-320-3436 ab7r at cablespeed dot com

Re: [Elecraft] LP Pan for sale

The LP-Pan has been sold. Thank you. 73 Greg On 4/1/13, Greg a...@cablespeed.com wrote: Selling an LP Pan setup for K3 IF with the attenuator circuit. $150 shipped. Tnx and 73 Greg - AB7R 360-320-3436 ab7r at cablespeed dot com

[Elecraft] LP-PAN Panadapter Ser#041 For Sale

This LP-PAN worked very well with my soundcard. Now have a P3 so no longer need it. LP-PAN S/N 041 $165.00 plus shipping from 76016. -- 73 Joe KK5NA ,,_ o )~ __ Elecraft mailing list Home:

[Elecraft] Lp-Pan

Does anyone have a new or used LP-Pan for the K-3 for sale? Prefer the pre-amp version but would consider without. Also looking for an E-MU 0202 or 0204 ext. soundcard? please reply off the list with price. thanks 73 Dwight NS9I __

Re: [Elecraft] Lp-Pan

Found one ... thanks 73 Dwight NS9I On 4/4/2012 8:53 AM, DGB wrote: Does anyone have a new or used LP-Pan for the K-3 for sale? Prefer the pre-amp version but would consider without. Also looking for an E-MU 0202 or 0204 ext. soundcard? please reply off the list with price. thanks 73

[Elecraft] LP-Pan For Sale

I have a used LP-Pan for sale with the audio cables and DC cable to connect to a K3. Reason for selling is due to purchase of Elecraft P3. Please contact me off list if interested. 73, Joel - W4JBB __ Elecraft mailing list Home:

[Elecraft] LP-Pan No Longer For Sale

Sorry for taking up your bandwidth, but after further consideration due to good opinions, I have decided to hold onto the LP-Pan for a bit and further evaluate it. I will, of course, let you know if I decide to re-list it. Thanks for the inquiries. 73, Joel - W4JBB

[Elecraft] LP-PAN

Anyone have a LP-Pan for sale? Please reply to k...@roadrunner.com Will be using it on my K3 of course. Thanks, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] LP-Pan for K3 For sale. Never used factory assembled

Does not have the preamp. $175.00 and I will ship via Priority Mail. W0MU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

Re: [Elecraft] LP-Pan for K3 For sale. Never used factory assembled

Sold pending payment. On 12/4/11 1:27 PM, Mike Fatchett W0MU wrote: Does not have the preamp. $175.00 and I will ship via Priority Mail. W0MU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [LP-PAN] K3 FW 4.31 problem

Hi Steve. I tried 4.31 with the current version of LP-Bridge and I couldn't reproduce this with just LP-Bridge or with LP-Bridge and PowerSDR/IF v1.19.3.5. I did have a little trouble getting 4.31 to load, but after a couple tries it loaded OK. It is normal for PowerSDR to mute when XMIT is

Re: [Elecraft] [LP-PAN] K3 FW 4.31 problem

Well I just checked it again and now it's working ok. I guess the reboot from last night fixed it. Sorry if I caused any confusion! Steve N4LQ - Original Message - From: Larry Phipps To: lp-...@yahoogroups.com Cc: Steve Ellington ; Elecraft@mailman.qth.net ; Wayne Burdick -

[Elecraft] LP-PAN

I'm interested in the LP-PAN if you haven't sold it yet. 73 John K3TN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] LP Pan versus P3 Panadapters

That's useful info for comparison, Alan. To satisfy my curiosity and answer the original question, I just ran a similar test with my LP-PAN, with and w/o the upcoming preamp mod kit. First, I should mention a couple differences in PowerSDR/IF and the P3. With PowerSDR/IF the sampling rate is

[Elecraft] LP Pan versus P3 Panadapters

I do not have a P3, so my comments are based on my experience using the SDR-IQ on 144-MHz using a 144/28 converter to receive 2m-eme signals. The sensitivity of the display is tied to the sampling rate (FFT/BLK size on the control panel of the SDR-IQ). With maximum sampling of 262,144 I get a

Re: [Elecraft] LP Pan versus P3 Panadapters

Also, the waterfall (or Panafall) display should be used to take advantage of the averaging, which reduces random noise. That's a point I forgot to mention. If you turn on averaging in the waterfall you can see farther down into the noise. It works best on steady carriers. With CW signals

Re: [Elecraft] LP Pan versus P3 Panadapters

On Sep 15, 2010, at 10:15 AM, Alan Bloom wrote: If you turn on averaging in the waterfall you can see farther down into the noise. It works best on steady carriers. With CW signals you have to keep the averaging time less than a dit. I have found that per-bin averaging of the power

Re: [Elecraft] LP Pan versus P3 Panadapters

Sorry, but the only way of handling this well is proper interleaved style. Edward R. Cole wrote: The sensitivity of the display is tied to the sampling rate (FFT/BLK size on the control panel of the SDR-IQ). With maximum sampling of 262,144 I get a bin size of 0.42 Hz. This also referred

Re: [Elecraft] LP Pan versus P3 Panadapters

Don, I'm using a Softrock IF kit (plus Z1B buffer amp) as a panadapter with a ~£275 Samsung NC10 netbook. Initially I was surprised but it works well with the internal Realtek HD soundcard. It runs LP Bridge, PowerSDR/IF and N1MM or Logger23 smoothly; with an extra LCD monitor this gives

Re: [Elecraft] LP Pan versus P3 Panadapters

Hi, I have been using LP-PAN for a couple of years. In spite of not owning a P3 I think I know enough about its capabilities to comment about the comparison. The P3 definitely has better sensitivity. LP-PAN is currently quite poor in that respect, but Larry is working (feverishly I hope) to

Re: [Elecraft] LP Pan versus P3 Panadapters

Bill, I can tell you that just last night, on 160 meters, I copied 2 very weak stations perfectly Q5 that did not show on the P3 waterfall. Now, Its entirely possible its my adjustment skills but I dont think so. Yes..the K3 IF Mod was factory installed. This has happened more than

Re: [Elecraft] LP Pan versus P3 Panadapters

are fine, even after 61 yrs of ham radio...ok for weak sig detection...73 Steve, W6HPK - Original Message - From: Larry K1UO k...@uninet.net To: elecraft@mailman.qth.net Sent: Tue, 14 Sep 2010 13:03:01 - (UTC) Subject: Re: [Elecraft] LP Pan versus P3 Panadapters Bill, I can tell

Re: [Elecraft] LP Pan versus P3 Panadapters

Corrections: beacons at 14100 Mhz, not 14000 Mhz,,,Steve W6HPK - Original Message - From: shwha...@comcast.net To: Larry K1UO k...@uninet.net Cc: elecraft@mailman.qth.net Sent: Tue, 14 Sep 2010 16:22:46 - (UTC) Subject: Re: [Elecraft] LP Pan versus P3 Panadapters Hi Larry all; I

Re: [Elecraft] LP Pan versus P3 Panadapters

Hello all -- K0AWU here I am reading this thread with great interest. I apologize to those that have seen similar messages from me on this subject in the past. I had SO HOPED that with such a large number of P3s now in the field I would have seen reports on weak sig detection from some of

Re: [Elecraft] LP Pan versus P3 Panadapters

Hi Larry, It depends on the span. Unlike some other panadapters, the P3 automatically reduces the sample rate as you narrow the span, which improves the sensitivity. For example, I have my HP8656B signal generator set to 3640 kHz with the amplitude as low as it will go (-127 dBm). The K3 has

Re: [Elecraft] LP Pan versus P3 Panadapters

for analysis of the IF information, rather than say a P3. KJ4VPI From: Alan Bloom n...@cds1.net To: Larry K1UO k...@uninet.net Cc: elecraft@mailman.qth.net Sent: Tue, September 14, 2010 1:00:30 PM Subject: Re: [Elecraft] LP Pan versus P3 Panadapters Hi Larry

Re: [Elecraft] LP Pan versus P3 Panadapters

For some reason that goes against what I think many are looking for in the P3, if one has to narrow the span to 2khz, then I see no use for the P3 at all, I need to see what is on the band at -127DBm at 30 to 50khz or more span. If the signal is only seen at 2KHZ, I can hear that by ear and

Re: [Elecraft] LP Pan versus P3 Panadapters

No I didn't have to narrow the span to 2 kHz to see the -127 dBm signal. Anything less than about 30 kHz was sufficient. Also, remember I had the K3 preamp off and the attenuator on. With the attenuator off, the -127 dBm signal is visible all the way up to 200 kHz span. With the K3 preamp

Re: [Elecraft] LP Pan versus P3 Panadapters

Hi Alan, Ill admit I didnt try a narrower span and I normally use the +-15Khz setting (30Khz span) on the 160 meter cw band. Ill try narrowing it up and see if it picks up the very weak signals but I dont want to operate on a too narrow span or, as they say, it becomes much less useful to

Re: [Elecraft] LP Pan versus P3 Panadapters

Alan, thanks for the explanation, sounds like there is some other problem then if people are not seeing the weak signals that they can hear. Will hook up the P3 here shortly and see what mine does. If you can see -127DBm at 30 KHZ it sounds fine to me. 73 Merv K9FD / KH7C No I didn't

[Elecraft] LP Pan versus P3 Panadapters

To All, Can you please provide comments on the LP Pan versus the P3 Panadapter on the K3. The LP Pan seems to have a lot more features compared to the P3 and the cost is so much less. I understand that the LP Pan requires a PC but you get a bigger screen when using a PC. What makes the

Re: [Elecraft] LP Pan versus P3 Panadapters

I don't yet have a P3, but I do use an SDR-IQ as a panadapter. I used an LP-Pan for a little bit before this. If I had to state one advantage for either of these compared to the LP-Pan it would be this: Neither of them uses PowerSDR. Wes N7WS --- On Mon, 9/13/10, Paul Maruna

Re: [Elecraft] LP Pan versus P3 Panadapters

Paul, I don't see you getting a lot of comments, so I'll throw in a few cents worth, hi. I bought the P3 for several reasons, but the main one is NOT for what it is right now, but what I think it will be over time. It will have VGA output at some time and allow the big screen, and I feel we,

Re: [Elecraft] LP Pan versus P3 Panadapters

detection with the P3 after many requests to the initial testers of the P3. ANYONE out there looking for weak weak sigs with a P3?? 73 Bill K0AWU EN37ed --- From: pmar...@yahoo.com To: elecraft@mailman.qth.net Date: Mon, 13 Sep 2010 20:00:52 -0400 Subject: [Elecraft] LP Pan

Re: [Elecraft] LP Pan versus P3 Panadapters

Bill, I cannot say anything about the comparison of weak signals on the waterfall between the two, but one great advantage of the P3 is the ability to adjust the span - you can go from observing a 200 kHz chunk of the band (-100 kHz to +100 kHz) to a width that will allow you to examine a

Re: [Elecraft] LP Pan versus P3 Panadapters

Bill, All I can tell you is if I can hear it I can see it! Rick K6LE On 9/13/2010, at 9:01 , Bill Davis Jr wrote: I too would like to see details of the improvement over LPan etc. I am a long time user of SDR/computer panadapters for use in detecting very weak signals at

[Elecraft] LP-PAN Sound Card For Sale

I have a factory built LP-PAN Sound Blaster X-FI sound card for sale. $195 shipped 73, Ken, K6LA / VY2TT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] LP-PAN and E-MU 0202 For Sale

For sale: Like-new LP-PAN and a like-new E-MU 0202 USB sound card. Full documentation. Includes Radio Shack patch cables. $210 including USPS shipping. 73, Hank, W6SX 760-934-7665 Mammoth Lakes, California Elevation 8083 feet in John Muir's Range of Light

Re: [Elecraft] LP-Pan and Rocky (was: SDR with a Twist)

Sure, it can be used with any SDR app. Larry N8LP On 7/23/2010 12:00 PM, elecraft-requ...@mailman.qth.net wrote: Message: 2 Date: Fri, 23 Jul 2010 07:51:39 +0200 From: Jon K?re Hellanhel...@acm.org Subject: [Elecraft] LP-Pan and Rocky (was: SDR with a Twist) To:elecraft@mailman.qth.net

Re: [Elecraft] LP-Pan and Rocky (was: SDR with a Twist)

Linux users might be interested in Quisk, which runs fine with LP-PAN; I've also provided an interface to the K3 and fldigi. It uses about 10% of the CPU on my desktop, which is a few years old. http://wa5znu.org/2009/04/quisk-lppan-k3/ There's a Windows port in the works, but not immediately.

[Elecraft] LP-Pan and Rocky (was: SDR with a Twist)

On 07/23/2010 01:17 AM, Steve Ellington wrote: Gosh I though someone had filed for documents under the Freedom of Information Act. But whatever, this sounds like a good scheme. You're right about PwrSDR being a resource hog. I had to get a dual core cpu just to run LP Pan smoothly. Can Rocky

Re: [Elecraft] LP Pan K2

Yup !! I am also looking for a reply on this. Looks like the thing to do if you have a K2 around .. On Mon, 14 Jun 2010 21:41:31 -0400, n0jrn n0...@mchsi.com wrote: Anybody running LP Pan with your K2??? IF so, what do you think of it I'm considering adding it to the shack

[Elecraft] LP Pan K2

Anybody running LP Pan with your K2??? IF so, what do you think of it I'm considering adding it to the shack and wanted some opinions before purchasing. Thanks 73: Jerry N0JRN __ Elecraft mailing list

[Elecraft] LP Pan and E-MU 0202 USB for sale

I have an LP-PAN (assembled version for K3) and an EMU-0202 USB box in working order that I am selling; $225 gets them including shipping in the continental US. Please reply directly if interested. Thanks 73 de Dave, W5SV w5sv.d...@gmail.com

[Elecraft] LP-Pan EMU-0202 cables included

I have an LP-PAN with an EMU-0202 sound card for sale this is a factory built unit. Would like $225 + shipping from Colorado Craig WØLV 719-661-5695 -- View this message in context: http://elecraft.365791.n2.nabble.com/LP-Pan-EMU-0202-cables-included-tp5080926p5080926.html Sent from the

[Elecraft] LP-PAN and other SDR

Got my K3 back after having the 144 module installed and all hardware updates done. Works wonderful except for one aspect. I have several SDR platforms to use and in every one, the panadaptor base line is below the -140 and I can't see the signals. Worked fine before. Any ideas? Phil

Re: [Elecraft] LP-PAN and other SDR

...@mailman.qth.net] On Behalf Of Phil LaMarche Sent: Friday, April 09, 2010 8:26 AM To: Elecraft@mailman.qth.net Cc: lp-...@yahoogroups.com Subject: [Elecraft] LP-PAN and other SDR Got my K3 back after having the 144 module installed and all hardware updates done. Works wonderful except for one

Re: [Elecraft] LP-PAN and other SDR

-0400 From: Phil LaMarche plama...@verizon.net Subject: [Elecraft] LP-PAN and other SDR To: Elecraft@mailman.qth.net Cc: lp-...@yahoogroups.com Message-ID: 56fa9e417074492f951c1e3d263e8...@lamarcheenterpr Content-Type: text/plain;charset=US-ASCII Got my K3 back after having the 144 module

[Elecraft] LP-PAN and other SDR

-0400 From: Phil LaMarche plama...@verizon.net Subject: [Elecraft] LP-PAN and other SDR To: Elecraft@mailman.qth.net Cc: lp-...@yahoogroups.com Message-ID: 56fa9e417074492f951c1e3d263e8...@lamarcheenterpr Content-Type: text/plain; charset=US-ASCII Got my K3 back after having the 144

[Elecraft] LP-PAN

I am looking for an LP-PAN/E-MU 0202 setup. Anyone want to sell theirs to fund the P-3? Let me know what you have and what you want For it. Thanks Dan N0DT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] LP-Pan for K3

For Sale: Factory assembled LP-Pan for K3 with Infrasonic PCI 192 kHz Pro audio interface card and full set of interconnecting cables. Everything like new. Used maybe one hour. Looks and works perfect. $250 including CONUS shipping. Going to a high end separate SDR approach. See photos

[Elecraft] LP Pan for sale

Selling my LP-Pan (K3) along with an M-Audio Firewire 96 kHz soundcard. The LP-Pan is in excellent condition. The firewire card works great but it does have a few marks on the top of the case. This card works easily with PowerSDR and Skimmer at the same time. $175 shipped CONUS. Tnx Greg

[Elecraft] LP-PAN/EMU0202 / AF1s

Still have: LP-Pan (Kit build) + EMU0202 - reduced $215 shipped (lower 48) (actual shipping elsewhere). Works fine, cosmetically excellent. (2) Elecraft AF1 Active audio filters w/ audio amplifier - $45 shipped each, $80 shipped for the pair OBO (they run $60 + shipping new). Used in stereo

Re: [Elecraft] LP Pan Quartet

The LP Pan and Quartet Sound Card have been sold. Thanks, Bob W6VY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] LP Pan Infrasonic Quartet for Sale

I have an LP Pan (for the K3) and a Infrasonic Quartet 192 kHz card for sale. Both are in as new condition. The LP Pan is serial 549 (purchased assembled). Price is $200.00 plus shipping (US only). Please contact me at off list. Thanks. Bob W6VY

[Elecraft] LP-PAN Buffer Modification

Hello: While sniffing around the LP-PAN website _http://www.telepostinc.com/_ (http://www.telepostinc.com/) I noticed a mod to the K-3 Buffer Amp that is supposed to improve receiver performance. The instruction information states that the modis not yet an approved mod for the

Re: [Elecraft] LP-PAN Buffer Modification

Is this the mod that improves the LP-PAN performance by giving it a slightly higher gain? I don't think it was supposed to have any effect on the K3 RX performance itself. Leigh/WA5ZNU Hello: While sniffing around the LP-PAN website _http://www.telepostinc.com/_

Re: [Elecraft] LP-PAN Buffer Modification

is ON, the gain distribution limits the degradation of the loss that comes after it to a degree. 73, Larry N8LP -- Date: Fri, 14 Aug 2009 10:18:57 EDT From: w3...@aol.com Subject: [Elecraft] LP-PAN Buffer Modification

[Elecraft] LP-Pan For Sale

I have a LP-PAN module, and a Creative E-MU-0202 USB sound module for sale. Modules work fine and the E-MU module comes in it's origonal box with all software and USB cable. Also include a home built set of cables to interconnect the modules Asking $225.00 shipping included in USA. Please

Re: [Elecraft] LP PAN and Point and Click

Actually, there a number of folks running multiple instances of LP-PAN/PowerSDR, both with two K3s and with a K3 with KRX3. It is not terribly difficult if you are computer savvy, and requires a newish PC (duo or quad core), but there is nothing in either program which prevents multiple instances

[Elecraft] LP-PAN and Soundcards FS

Excellent condition LP-PAN for sale. Includes USB and audio cables, EMU-0202 soundcard and an Audiophile firewire soundcard. This is for interfacing an Elecraft K3 to a soundcard to be able to use the SDR-IF or SDR-IQ software for a panadapter. Works great! Also, if you have a Kenwood with

Re: [Elecraft] LP PAN and Point and Click

Yea I figured this was possible but I was trying to help solve the issue in the manner the person was looking to. And using synergy would allow one to get the job done with two lesser machines. The worlds greatest multi tasker is another computer... ;) Thanks much Larry... ~Brett On Sun,

Re: [Elecraft] LP PAN and Point and Click

Dick Williams-2 wrote: Your point is well taken; but in the end what percentage of amatuers that own a K3 do not have it hooked up to a computer and a logging program; and I bet that most amateurs leave their computer on 24/7 and connected to a DX Cluster. I certainly don't do

Re: [Elecraft] LP PAN and Point and Click

Julian, G4ILO wrote: I'd be happier with a computer-based solution if the software ONLY gave you the panoramic display. I want a standalone display that I can use alongside the software of my choice but although I certainly understand the reasoning of those who want one that will work without

Re: [Elecraft] LP PAN and Point and Click

Here is one way to pull off what you want... Use 2 PC's and 2 LP-PAN's with your 2 K3's and then user Synergy to tie the two PCs together. I use this at work. I have two monitors and two PC's (one running linux and the other running windows) and I'm able to share one keyboard and mouse between

Re: [Elecraft] LP PAN

Brett Howard wrote: Because some of us despise being forced to run Windows to use the product. Some of us would also like the tools to continue working It's quite likely that the cheapest way for Elecraft to implement such a product would result in its running Windows, albeit XP embedded, on

Re: [Elecraft] LP PAN and Point and Click and other threads (K3)

Just a gentle suggestion from a non-K3 guy. A while back it was brought up that we'd place the model # of the rig being discussed in the subject line of our posts, when applicable. Like, K3 when we were talking about that rig, or K1, etc. Threads of general interest would not have any

  1   2   >