Re: [Elecraft] T1 beginner operating question

One note I should add - after the "INFO" procedure (emits "L0" with yellow LEDs, followed by string of individual flashes with Red LED), I noticed relays clicked once at the end of the red LED sequence. On Sunday, January 14, 2024 at 05:31:25 PM MST, wrote: Thanks, Myron - I've

Re: [Elecraft] T1 beginner operating question

Thanks, Myron - I've plugged my paddle (tip = dit, ring = dah) into the side jack of the tuner. I can press the Dah (RING) contact and after 2 seconds while in sleep mode, it appears to enter tune-ready (blinking green LED) condition. During blinking green LED condition, application of 5

[Elecraft] T1 beginner operating question

I've been lent a T1 tuner by a local ham friend with "can you get it to work at your station?" request, following a "no trouble found" round trip to Elecraft and back late last year. I've never used a T1 before. Station is a Kenwood TS940 set to minimum TX power (about 5 watts); antenna is a

Re: [Elecraft] T1 Antenna Tuner for sale SPOKEN FOR.

The T1 has been spoken for. Thanks. Jim, W0EB -- Original Message -- From "Jim Sheldon" To "Elecraft Reflector" Date 8/30/2023 10:41:39 AM Subject T1 Antenna Tuner for sale I have a T1 that's a couple years old. It got used only slightly and never out portable with my KX2 after

[Elecraft] T1 Antenna Tuner for sale

I have a T1 that's a couple years old. It got used only slightly and never out portable with my KX2 after I built it from the kit. I added the internal tuner to the KX2 to minimize things to carry when we went on vacation and the T1 was shelved as a backup in case the KX2's tuner quit (it

[Elecraft] SOLD: FS; Elecraft T1

Subject says it all. Thanks for allowing me to post to the group. Jack - KD4IZ From: kd...@frawg.org Sent: Tuesday, August 22, 2023 14:58 To: 'elecraft@mailman.qth.net' Subject: FS; Elecraft T1 All, I have moved away from using my T1 and now use more "direct" antenna solu

[Elecraft] FS; Elecraft T1

All, I have moved away from using my T1 and now use more "direct" antenna solutions. I am asking $250 delivered. I will accept PayPal or Zelle only if shipped. $240 cash if you live in the Baltimore - York, PA corridor and we can meet. PLEASE contact me direct at KD4IZfrawg,org. PLEASE

[Elecraft] Looking for an Elecraft T1 QRP tuner

Elecraft has no idea when they will again be selling their qrp T1 tuner. If anyone has one they are willing to part with I can give it a good home. Thanks very much Joy N6GO __ Elecraft mailing list Home:

Re: [Elecraft] Elecraft T1 auto tuner question

I use this on all my QRP rigs that can't take a high SWR during tuning with an external tuner: https://qrpguys.com/tuning-indicator It's tiny, inexpensive, and keeps the SWR under 1.5:1 while you are tuning, and has a little slide switch that bypasses the gadget after you done tuning, so you

Re: [Elecraft] Elecraft T1 auto tuner question

The T1 specs say that it should function with input power as low as 0.5 watts.  An 8 dB attenuator at the output of your 4-5 watt QRP rig should still give you close to 0.5 watt into the T1, and the attenuator acts as a buffer that diminishes the reflected power from the high SWR load.  Tune

[Elecraft] Elecraft T1 auto tuner question

I have a T1 that I have used for several years. I recently purchased a QCX-mini, and an SW-3B. I normally use my K2, KX2 or KX3 for portable operations, but occasionally I like to use something different for QRP CW. Both the QCX-mini and the SW-3B require a 2.0 or less SWR. The documentation

[Elecraft] T1 ATU Not Staying In Tune Mode

All: Is it normal for the T1 ATU not to stay in tune mode after tuning an antenna? I've noticed that my T1 will occasionally default back to power mode so I need to switch the T1 back into tune mode whenever I switch bands and need to re-tune. Tony

[Elecraft] T1 antenna tuner

Anyone have an extra one? 72, Bob KI0G Sent from Yahoo Mail for iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

Re: [Elecraft] Elecraft T1 Tuner Issue

Hi Thomas, I didn't solve it yet, but I haven't given up. I'm in Finland working at the moment, but will be home tomorrow - I'll find and forward the email I had from Elecraft giving some pointers about where to look. Best regards, Paul 24 Aug 2022 06:06:36 Tomas Bystrican : > Hi Paul, > >

Re: [Elecraft] T1 not tuning

Hi Fred, when you operate bypass do you hear a relay click (K8)? If so the MCU is working and you eliminate a good bit of circuitry, Have you read this? There is a schematic on page 12. https://ftp.elecraft.com/T1/Manuals%20Downloads/E740079%20T1%20owners%20man%20rev%20B.pdf

Re: [Elecraft] T1 not tuning

I changed the battery out and still the same issue from 6-80m. Tuner just stays on yellow light. Have tried bypass off and on and still seems like same results. Sent from my iPhone Fred VE3FAL/CIW649 > On Apr 26, 2022, at 17:35, Paul Jewell wrote: >

Re: [Elecraft] T1 not tuning

Not sure if you are referring to my post from a few weeks back. When I finally spent time diagnosing my problem, I can confirm it is doing everything as expected, except it continually flashes 4 yellow. Based on a very helpful email from Elecraft technical support, it is clear that something is

[Elecraft] T1 not tuning

I had just read a post from someone who said their T1 had quit tuning. I pulled mine out of my qrp go-bag only to find mine has also stopped tuning. Now, with that being said. I have not changed the battery out for a new one as of yet. But wondering if the other person who had issues came to a

Re: [Elecraft] Elecraft T1 Tuner Issue

ems to be working. Any ideas? Many thanks! On 17/04/2022 15:47, Paul Jewell wrote: Good afternoon, I have a Elecraft T1 tuner which I used last summer, but have had it stored away for several months. Today I have been trying to use it again with my KX3, but I am having an issue which I ca

[Elecraft] Elecraft T1 Tuner Issue

Good afternoon, I have a Elecraft T1 tuner which I used last summer, but have had it stored away for several months. Today I have been trying to use it again with my KX3, but I am having an issue which I can't resolve. The yellow LED is flashing continuously, as it would when selecting

[Elecraft] WTB Elecraft T1

Anyone have an Elecraft T1 Auto Tuner they are looking to sell? Let me know what you have and how much shipped to 49009, Kalamazoo Michigan. Thanks. Larry, KN8N Kalamazoo, Michigan __ Elecraft mailing list Home: http://mailman.qth.net

Re: [Elecraft] OT FS: Elecraft T1 Tuner - Assembled

Folks, the T1 has been sold - thanks to all who responded. I’ll probably have more goodies to post in the near future. > On Apr 4, 2022, at 11:07 AM, James Bennett wrote: > > Got another item in the shack that has moved to my “un-needed at this time” > list: an Elecraft T1 tuner,

Re: [Elecraft] OT FS: Elecraft T1 Tuner - Assembled

Just for clarification - this T1 was not factory assembled - I built it from a kit a while back. > On Apr 4, 2022, at 11:07 AM, James Bennett wrote: > > Got another item in the shack that has moved to my “un-needed at this time” > list: an Elecraft T1 tuner, with printed manual

[Elecraft] OT FS: Elecraft T1 Tuner - Assembled

Got another item in the shack that has moved to my “un-needed at this time” list: an Elecraft T1 tuner, with printed manual. Works fine, never been out of the house. Non-smoking environment. Take a look at the price of a new one! I’ll sell mine for $185, shipped USPS Priority Mail. Jim

Re: [Elecraft] T1 IC705 interface cable

Hi Wayne, any news on this? :-) Thanks and 73, Erik Tkal - W1QED On Jul 28, 2021, at 16:35, Wayne Burdick wrote: Some issues came up during testing. We'll post more details when we get closer. 73, Wayne N6KR > On Jul 28, 2021, at 9:55 AM, Edward Seeliger wrote: > > Is there an

Re: [Elecraft] T1 Tuner Question ?

On 8/16/21 at 2:15 PM, ecke...@gmail.com (Paul Ecker) wrote: > Thanks to all that responded to my T1 Tuner question. Turns out the one I > was asking about, that I bought thru QRZ Swapmeet would not tune, but the > seller immediately refunded my money via PayPal. The second offer of a T1 > also

Re: [Elecraft] T1 Tuner Question ?

Thanks to all that responded to my T1 Tuner question. Turns out the one I was asking about, that I bought thru QRZ Swapmeet would not tune, but the seller immediately refunded my money via PayPal. The second offer of a T1 also via QRZ turned out to be a scam. So enough, just ordered a brand new T1

Re: [Elecraft] T1 Tuner Question ?

Make sure you haven't bypassed the tuner. I have this (excellent) tuner, but I have been caught out a couple of times when the tuner has been in bypass, and I have tried to tune. You will hear the relays when it is tuning. Paul / MW7PAJ On 15/08/2021 01:00, James Bennett via Elecraft wrote:

Re: [Elecraft] T1 Tuner Question ?

Paul, I believe you should hear a few relays click. If you are connected to a load that the T1 “knows” there may be no click. You can test that by using a different antenna or a dummy load. Jim / K7TXA > On Aug 14, 2021, at 2:21 PM, Paul Ecker wrote: > > I just purchased a T1 Tuner from a

[Elecraft] T1 Tuner Question ?

I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it says: *To start tuning, transmit while the green LED is flashing (about 3 seconds). If you use SSB voice or a CW keyer, relay switching will start and stop. Keep transmitting until all LEDs turn off.* I am not hearing or

Re: [Elecraft] T1 IC705 interface cable

Some issues came up during testing. We'll post more details when we get closer. 73, Wayne N6KR > On Jul 28, 2021, at 9:55 AM, Edward Seeliger wrote: > > Is there an update on availability of the interface cable to connect the T1 > tuner to the Icom IC705? > Edd - KD5M >

[Elecraft] T1 IC705 interface cable

Is there an update on availability of the interface cable to connect the T1 tuner to the Icom IC705? Edd - KD5M __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] T1 cable for the IC-705

We hope to get back to work on this soon. We have a prototype -- just needs some firmware. 73, Wayne N6KR > On May 5, 2021, at 12:42 PM, Don - W6CZ wrote: > > Waiting with breath like bait... ;) > > > > - > Don > W6CZ > DM07bk > -- > Sent from: http://elecraft.365791.n2.nabble.com/ >

Re: [Elecraft] T1 cable for the IC-705

Me too. I’m fine with folks running QRP transceivers off 500W amps and all, but I use them at <10W, so the T1 is perfect. Other options take up too much space/weight in my backpack! Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

...@w3fpr.com Cc:Elecraft@mailman.qth.net Subject: Re: [Elecraft] T1 Tuner Kit Control Board final check issues Message-ID: Content-Type: text/plain;    charset=utf-8 Hi Don, Yeah, I don?t often perform measurements on components already installed in a circuit, so the behaviour was confusing.  I

[Elecraft] T1 Tuner Kit Control Board final check issues

.? Does anyone have any suggestions for a more permanent fix?? Thank you in advance.? Dave, K8RXB?Sent from my Galaxy -- Message: 3 Date: Tue, 25 May 2021 15:01:18 -0400 From: Erik Tkal To:d...@w3fpr.com Cc:Elecraft@mailman.qth.net Subject: Re: [Elecraft] T1 Tuner Kit

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

And for the bands to cooperate!! :-) Congrats, Erik. > On May 25, 2021, at 1:01 PM, Erik Tkal wrote: > > Hi Don, > > Yeah, I don’t often perform measurements on components already installed in a > circuit, so the behaviour was confusing. I thought I bought a nice DMM but I > guess it was

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

Hi Don, Yeah, I don’t often perform measurements on components already installed in a circuit, so the behaviour was confusing. I thought I bought a nice DMM but I guess it was just a fluke… ;-) Anyway, I got it finished and everything is operational, now just have to wait for the IC-705

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

Erik, Yes, using auto ranging on the DMM can cause false readings.  Try to set the fixed range a bit above the highest expected resistance for the best results.  It all depends on the voltage the DMM applies to the circuit.  Too high a voltage can make ICs and transistors conduct causing a

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

Hi Don, Everything appears correct and in place, already used magnification to check, and individual resistors all seem to measure correctly. I still think it's my multimeter in auto mode. I went back and retried the initial test using manual ranging and if I set the range to 600K it shows a

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

Since that is the case, check the value of the resistors and check out the soldering under magnification. 73, Don W3FPR On 5/24/2021 3:08 PM, Erik Tkal wrote: Hi Don, Nope, D3 and D4 are correct, and the LEDs check out per the test...

Re: [Elecraft] T1 Tuner Kit Control Board final check issues

Erik, Check and double check the orientation of the diodes.  That is the most likely reason for you measurement results. 73, Don W3FPR On 5/23/2021 5:39 PM, Erik Tkal wrote: I just assembled the T1 kit, but am having an issue in the final check phase of the Control Board. "Resistance

[Elecraft] T1 Tuner Kit Control Board final check issues

I just assembled the T1 kit, but am having an issue in the final check phase of the Control Board. "Resistance across capacitor C19: between 137 K-ohms and 148 K-ohms. Press S2 and confirm reading drops to between 117 K-ohms and 135 K-ohms.” I’m getting around 60K or 43K with my Fluke 117,

Re: [Elecraft] T1 cable for the IC-705

Waiting with breath like bait... ;) - Don W6CZ DM07bk -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] T1 and IC705 interface

Hi Edd, Thanks for asking. It's still in progress, and we'll provide full details when available. 73, Wayne N6KR > On Apr 27, 2021, at 5:37 PM, Edward Seeliger wrote: > > Is there any update information about the availability of the T1 to IC705 > interface? > Edd KD5M > > Sent from my

[Elecraft] T1 and IC705 interface

Is there any update information about the availability of the T1 to IC705 interface? Edd KD5M Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Elecraft T1 and ICOM IC-705

stom enclosure that measures only 2.5 x 1.2 x > 0.4”. > > 73, > Wayne > N6KR > > > elecraft.com > >> On Jan 26, 2021, at 12:48 AM, Björn Ekelund wrote: >> >> Thinking entirely egoistic, I think Elecraft should manufacture this > great

[Elecraft] T1 bypass mode and 2M/70CM

I know that the T1 can’t be used to tune an antenna above 6 meters, but can it be used in the bypass mode? -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home:

Re: [Elecraft] T1 cable for the IC-705

In progress. Wayne elecraft.com > On Feb 27, 2021, at 1:57 PM, William Combs via Elecraft > wrote: > > Is there any update on the T1 control cable for the IC-705? > > Bill > W8BC > > > > __ > Elecraft mailing list >

[Elecraft] T1 cable for the IC-705

Is there any update on the T1 control cable for the IC-705? Bill W8BC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] Elecraft T1 and ICOM IC-705

pter is housed in a custom enclosure that measures only 2.5 x 1.2 x >> 0.4”. >> >> 73, >> Wayne >> N6KR >> >> >> elecraft.com >> >>>> On Jan 26, 2021, at 12:48 AM, Björn Ekelund wrote: >>> >>> Thinking entirely e

Re: [Elecraft] Elecraft T1 and ICOM IC-705

> > > > Thinking entirely egoistic, I think Elecraft should manufacture this > great > > design as an option to the equally great T1. > > Elecraft T1 controller (T1con) with extremely low energy consumption!: > > アマチュア無銭家のブログ (cocolog-nifty.com) >

Re: [Elecraft] Elecraft T1 and ICOM IC-705

> design as an option to the equally great T1. > Elecraft T1 controller (T1con) with extremely low energy consumption!: > アマチュア無銭家のブログ (cocolog-nifty.com) > <https://amateur-radio.cocolog-nifty.com/blog/2021/01/post-7d1c42

[Elecraft] Elecraft T1 and ICOM IC-705

Thinking entirely egoistic, I think Elecraft should manufacture this great design as an option to the equally great T1. Elecraft T1 controller (T1con) with extremely low energy consumption!: アマチュア無銭家のブログ (cocolog-nifty.com) <https://amateur-radio.cocolog-nifty.com/blog/2021/01/post-7d1c42.h

Re: [Elecraft] T1 Tuner green/yellow flashing LEDs

What I meant to say in the second paragraph is that the yellow light will flash if you tap PWR and do nothing else. > On Dec 15, 2020, at 12:50 PM, James Bennett via Elecraft > wrote: > > Craig - I built one about two months ago and it’s working fine. > > On mine, to go to bypass, I quickly

Re: [Elecraft] T1 Tuner green/yellow flashing LEDs

Craig - I built one about two months ago and it’s working fine. On mine, to go to bypass, I quickly press the PWR button, then the BYP button. Doing so alternates back and forth between bypass and not. After doing that one-two press combo, the yellow will light up for a second or two if you are

[Elecraft] T1 Tuner green/yellow flashing LEDs

I just finished building my T1 kit. As with their other gear, top notch instructions and quality. A very solid design. Power up and test all appear to be functional, although I've not tuned any radials yet, since I wanted to step through the testing. Everything appears nominal including the

Re: [Elecraft] T1 Question

th.net> > On Behalf Of James Bennett via Elecraft Sent: Monday, November 2, 2020 12:15 To: Elecraft Reflector Reflector mailto:elecraft@mailman.qth.net> > Subject: [Elecraft] T1 Question The specs for the T1 QRP antenna tuner indicate "Tuning times (typical): 2 to 8 seconds for

[Elecraft] T1 Question

The specs for the T1 QRP antenna tuner indicate "Tuning times (typical): 2 to 8 seconds for initial tuning; 1 to 2 seconds to re-tune from memory” and "Many tune-ups are saved for fast re-tuning” However, I can’t find any documentation as to how many memories this thing actually has. Does

Re: [Elecraft] T1

I have one as well that I think I can part with. Mike va3mw On Fri, Dec 13, 2019 at 9:48 AM Ian Kahn wrote: > Terry, > > I have one for sale. Let's connect off-line. > > Ian, NV4C > > On Fri, Dec 13, 2019, 9:39 AM Terry Basom wrote: > > > Looking for a T1 tuner.. > > > > Thanks > > Terry > >

Re: [Elecraft] T1

Terry, I have one for sale. Let's connect off-line. Ian, NV4C On Fri, Dec 13, 2019, 9:39 AM Terry Basom wrote: > Looking for a T1 tuner.. > > Thanks > Terry > VE3IQL > __ > Elecraft mailing list > Home:

[Elecraft] T1

Looking for a T1 tuner.. Thanks Terry VE3IQL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] T1 ATU for 200mW WSPRlite

Thanks Bill, but I wasn't clear the options I was looking for were how to use he T1 with the EndFed antenna I have with the WSPRlite, given that the T1 requires 0.5W and the WSPRlite outputs only 0.2W. Odd as it sounds, I'm looking for an "amplifier" to switch in to bump 10-25 fold to 2-5W as the

Re: [Elecraft] T1 ATU for 200mW WSPRlite

from Mail for Windows 10 From: MaverickNH Sent: Sunday, June 30, 2019 7:47 AM To: elecraft@mailman.qth.net Subject: [Elecraft] T1 ATU for 200mW WSPRlite I'm planning to do some camping and will bring along a KX3Helper EndFed 40-6m antenna with 9:1 Unan, T1 ATU and SOTAbeams WSPRlite to run on 30m

[Elecraft] T1 ATU for 200mW WSPRlite

I'm planning to do some camping and will bring along a KX3Helper EndFed 40-6m antenna with 9:1 Unan, T1 ATU and SOTAbeams WSPRlite to run on 30m from a USB battery bank. The T1 requires 0.5W to tune but the WSPRlite output is 0.2W. Any thoughts on options other than tuning up with another radio

[Elecraft] T1 stopped cooperating

My wonderful new T1 has just developed the following condition: I can't access the Info or Bypass; tapping PWR always and only results in a blinking yellow. I also tried to do the L-network test; no response. I can't think of anything that changed, since the last time I accessed these functions.

[Elecraft] FS: Elecraft T1

Afternoon all: I purchased the following items in hopes of setting up a portable QRP station/coms go kit of sorts with the Yaesu FT817ND, however I'm finding that work and family commitments leave me little to no time for the hobby. I also recently obtained a KX2 which also streamlines my QRP

Re: [Elecraft] [T1] Newly assembled T1 inop

Found the problem! As many would guess - it's a solder problem! A tiny splash of solder in a random location shorted one of the remote control lines to ground! 73, Randy, KS4L On Thu, Apr 11, 2019, 9:05 PM Randy Moore wrote: > Just completed an Elecraft T1 ATU. I built and used one seve

[Elecraft] [T1] Newly assembled T1 inop

Just completed an Elecraft T1 ATU. I built and used one several years ago and wished I hadn’t sold it, so built another one. But it’s not working. When I plug-in the (tested good) 9v battery, the yellow LED blinks 4 times (not mentioned in the manual that I can see), but there’s no response

[Elecraft] T1 aznd LP-PAN Sold

The T1 and LP-PAN have been sold. XG3 still available. Thanks to Elecraft reflector for making this possible. Eric KE6US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] T1

Has anyone used the T1 remote cable with the Yaesu FT-818Elecraft says they have not tested it. 73! Tomy KF7GC AZ STM, A1-Operator NM AZ Section Net, ORS, www.atenaz.net __ Elecraft mailing list Home:

[Elecraft] T1 ATU

I recently bought and built the T1 ATU, and it works great - no issues from first power up on. I should say it functions correctly - but I have a problem with the battery voltage displayed by the ATU. It seems to be over 1V high. I don’t expect calibrated precision, but a semi used 9V

[Elecraft] FS: Elecraft T1 and Yaesu FT817ND #QRP

Morning all: I purchased the following items in hopes of setting up a portable QRP station/coms go kit of sorts with the Yaesu FT817ND, however I'm finding that work and family commitments leave me little to no time for the hobby. I also recently obtained a KX2 which also streamlines my QRP

[Elecraft] T1 tuner kit

I recently picked up a kit built T1 tuner which doesnt quite work. On power up the yellow led flashes thrice then then stops and thats all we get. It is not well built so Im going to reflow all joints and carefully check everything, BUT, I wonder whether anyone else has come across this fault

[Elecraft] T1 QRP Autotuner

I just finally completed building my T1 tuner kit. It's been hanging around unbuilt for years! It went together really nicely. Soldering the relays was a bit tricky, but everything went okay and it worked perfectly first time. I have to say it's a marvelous but of kit. Extremely well

[Elecraft] T1 ATU parts question

I'm taking a parts inventory and noticed that I've been provided with a 78L06 instead of an 78L05.   Is this expected or should I contact Elecraft for the specified part? Thanks,Scott N1ST __ Elecraft mailing list Home:

Re: [Elecraft] T1 BNC connector

Rick, It is a low profile PC Mount BNC connector. Elecraft p/n E620075. See the parts listing in the T1 assembly instructions for a small photo. It is also used in the KX1. 73, Don W3FPR On 1/21/2018 2:17 AM, Rick McGaver wrote: Is the BNC connector used on the T1 tuner standard pcb mount?

[Elecraft] T1 BNC connector

Is the BNC connector used on the T1 tuner standard pcb mount? Rick. NK 9G Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] T1 as remote tuner for KX2/KX3?

Hi Wayne, Sounds good, could you tell us the approximate offset of the feed point from the centre, I would like to try this from home. Many Thanks, Glen VK1FB On Saturday, September 16, 2017, Wayne Burdick wrote: > Steve, > > This should work. A couple of notes: > > 1.

Re: [Elecraft] T1 as remote tuner for KX2/KX3?

Steve, This should work. A couple of notes: 1. Yes, you could use one of the general-purpose I/O signals from the KXIO2 module to activate a T1 ATU. The associated menu entry could be assigned to one of the four programmable function buttons. There’s no way to do full T1 control from the KX2,

[Elecraft] T1 as remote tuner for KX2/KX3?

I am developing plans a hut-to-hut skit tour in Canada for next winter. On this trip, I will want to operate my KX2 inside of metal-roofed A-frame huts with a 60' feedline (RG-174, RG-58, or 300Ω twinlead?) to some kind of wire antenna outside. I plan to operate SSB on 40 & 20 meters at a minimum,

[Elecraft] T1

T1 is spoken for, pending payment. Thanks for all the interest. Mike, W4UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] T1-A and T1-FT817C FOR SALE

Michael, I'll take it if no one else has claimed it. Thanks, Randy AK4QK Member Calhoun County Amateur Radio Assn. NAQCC #6312 On Jul 15, 2017 2:17 PM, "Michael Raskin" <rask1...@bellsouth.net> wrote: > For sale is a brand-new, still in the box, never-used, factory asse

[Elecraft] T1-A and T1-FT817C FOR SALE

For sale is a brand-new, still in the box, never-used, factory assembled Elecraft T1-A Automatic Antenna Tuner. New they sell for $159.95 assembled. Buy mine for $100. Also have a brand-new T1-FT817C Remote Control Adapter Cable which sells new for $59.95. Buy mine for $40. Or buy both

Re: [Elecraft] T1 doesn't tune nor read power levels

ione.serv...@gmail.com> Cc: elecraft@mailman.qth.net Bcc: Date: Sun, 21 May 2017 23:01:38 -0400 Subject: Re: [Elecraft] Elecraft T1 doesn't tune nor read power levels Motors? Forwarded message -- From: Nr4c <n...@widomaker.com> To: IU6ASS <5battaglione.serv...@gmail.com> Cc:

Re: [Elecraft] Elecraft T1 doesn't tune nor read power levels

Motors? Sent from my iPhone ...nr4c. bill > On May 21, 2017, at 1:29 PM, IU6ASS <5battaglione.serv...@gmail.com> wrote: > > Couple of weeks ago i got my hands on a used rig, an FT817D plus an Elecraft > T1 tuner. The tuner worked fine until yesterday, doing the autotunin

Re: [Elecraft] Elecraft T1 doesn't tune nor read power levels

d antennas just for good measure, but there is no change. -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-T1-doesn-t-tune-nor-read-power-levels-tp7630887p7630890.html Sent from the Elecraft mailing list archive at

Re: [Elecraft] Elecraft T1 doesn't tune nor read power levels

Hello. Open up the tuner and see if the motors are trying to turn. They may be frozen/sticky. 73. John. On 21/05/2017 10:29 AM, IU6ASS wrote: Couple of weeks ago i got my hands on a used rig, an FT817D plus an Elecraft T1 tuner. The tuner worked fine until yesterday, doing the autotuning

[Elecraft] Elecraft T1 doesn't tune nor read power levels

Couple of weeks ago i got my hands on a used rig, an FT817D plus an Elecraft T1 tuner. The tuner worked fine until yesterday, doing the autotuning at band change and tuning when pressing the "tune" button. But now when i press the tune button or switch between bands and trans

Re: [Elecraft] T1 no longer tunes.

Thanks Mike. RF is getting out, but the bypass button no longer works... Gil. Michael Walker wrote: > It also will not tune if the radio is not sending out an RF. __ Elecraft mailing list Home:

Re: [Elecraft] T1 no longer tunes.

Is your output power to low? I built a T1 a few weeks ago and at first it worked good, Then it started acting up...  I had turned my output power down, turning it back up solved the problem. Note: As per the manual 2-5 watts is the recommended power setting.

Re: [Elecraft] T1 no longer tunes.

It also will not tune if the radio is not sending out an RF. Have you turned down your RF output to Zero? Failing that, try resetting. If that doesn't work, if you don't get any RF out with or without the tuner in line, then either the finals have failed or you have a RF lead that has failed

Re: [Elecraft] T1 no longer tunes.

9.2V kg9hfr...@gmail.com wrote: > Battery? > Frank KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] T1 no longer tunes.

Battery? Frank KG9H > On Feb 5, 2017, at 6:54 PM, Gil via Elecraft wrote: > > Well, it looks like the bypass button is no longer working. Neither > tapping or holding the button does anything... > > Gil. > > Gil wrote: >> Thanks Eric. I thought about that, even

Re: [Elecraft] T1 no longer tunes.

Well, it looks like the bypass button is no longer working. Neither tapping or holding the button does anything... Gil. Gil wrote: > Thanks Eric. I thought about that, even removed the battery and retried... > Gil. > Eric Swartz - WA6HHQ, Elecraft wrote: >> Hi Gil >> Make sure you have not

Re: [Elecraft] T1 no longer tunes.

Hi Gil, Make sure you have not accidentally put it in bypass mode. That is the most common mistake made on the T1. 73, Eric elecraft.com _..._ > On Feb 5, 2017, at 8:39 AM, Gil via Elecraft wrote: > > Hello, > > My T1 doesn't tune anymore. I built it only a few

[Elecraft] T1 no longer tunes.

Hello, My T1 doesn't tune anymore. I built it only a few weeks ago. It used to work just fine. Now the tuner no longer goes through the relays clicking routine and only shows SWR with the LEDs. Any suggestions? Thanks guys! Gil, AK4YH & F4WBY. -- Development, Unix servers, Databases. PGP Key:

[Elecraft] T1 QRP Antenna Tuner - is U2 supposed to be a 5v or a 6v regulator?

The manual has it listed as a L78L06 or LM78L06 (6v regulator) but I received a LM78L05ACZ in the kit (5v Regulator). The schematic also shows 6v  (I'm not a PIC guy but I thought they took 5v and not 6v) Did I get the wrong part or is the manual wrong? Thank you

Re: [Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

The Elecraft has been sold - thanks to all who have replied! Dan - NB1C -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan Boardman Sent: Sunday, August 21, 2016 1:03 PM To: Elecraft Subject: [Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

[Elecraft] FOR SALE: ELECRAFT T1 ATU - Factory Built

I have a Elecraft T1 (factory built) for sale - I used it ounce, Non smoking user. Sell for $125 shipped in the US - Paypal OK - ADD 3% for fees. First responder that tells me they will take it will be the lucky new owner! Thanks much Dan - NB1C

  1   2   3   4   >