On Nov 21, 2007 6:22 AM, Greg [EMAIL PROTECTED] wrote:
I renewed my subscription and updated Spysweeper today before doing an
update. It did block it but only because it was set to block exe files. I
went into the setup in Spysweeper to ask first instead of auto blocking.
When I ran setup
FYI: Here at work neither Spybot - Search Destroy nor Trend Micro reported
any problems.
vy 73 de toby
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
This is a bit off-topic, although I'm asking in the context of the K3
operating software I'm writing (more info on this at
www.g4ilo.com/kcommunicate.html .) My program will keep a log of
contacts made with it in MixW log format, because that's what I'm
already using. If you use MixW already you
With Log Window 4.5 you can now have it connect to your MixW log, so
anything logged in MixW goes into the LW log simultaneously without the need
to do an export/import. --Dale, K4EQ
-Original Message-
From: Julian G4ILO [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 21, 2007
I'm using a hakko 936 and I have a .05 chisel tip. The solder that I'm
using is kester SN60PB40 #66/44 .025. (It is my intention to use this solder
and the .05 tip when working on the K1.)
Robert,
I thought of two items when
I was looking at all the neat pictures out there of K3 assembly and I noticed a
picture of the K3 Amp that has some resistors going from the binocular
transformer...across the final transistorsto a solder pad. Looked kind of
goofy to me so I thought I would ask.
Are those some sort of
For Windows users who don't currently run a Spyware detector but are
considering doing so now after being alerted by this discussion, please
be careful when picking one as there are many free download programs
which claim to be spyware checkers and have lookalike names similar the
ones
Those are feedback resistors and dissipate a few watts of power. They
need to up in the air to allow the power to dissipate without burning
the board.
73,
Bob, N6CM
On Nov 21, 2007 6:46 AM, Lee Buller [EMAIL PROTECTED] wrote:
I was looking at all the neat pictures out there of K3 assembly and
Hello,
Saturday 24 Nov. 2007 the Polar Bears will be on the HF bands out on the
trails. Yes, there is a major CW DX contest going on this weekend but it is
The Full Beaver Moon on the 24th.
Most of the Polar Bears that will be on the air will be on 40, 30 and 80m
CW during the day into the
On Wed, 21 Nov 2007 07:24:44 -0800, you wrote:
Amen. Good comment!
For Windows users who don't currently run a Spyware detector but are
considering doing so now after being alerted by this discussion, please
be careful when picking one as there are many free download programs
which claim to
Could we K3-hungry folks have some more eHam (reviews), please? And thanks to
those 6 lucky guys who already submitted them.
73 from K3-hungry George, n4ym
K2 # 4758
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Dick is having trouble posting. Here is his comment on the downloader
utilty and anti-spyware.
73, Eric WA6HHQ
Original Message
Subject:RE: [Elecraft] Latest updater reported as Spyware!
Date: Wed, 21 Nov 2007 07:36:07 -0800 (PST)
From: Dick Dievendorff [EMAIL
Says something about the popularity of eHam, doesn't it
73! Ken Kopp - K0PP
K2 #5665
K3 #56
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Trying again without the picture.
Dick, K6KR
-Original Message-
From: Dick Dievendorff [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 21, 2007 7:36 AM
To: 'Dave G4AON'; '[EMAIL PROTECTED]'; 'wayne burdick';
'elecraft@mailman.qth.net'
Subject: RE: [Elecraft] Latest updater reported
On Nov 21, 2007 3:24 PM, Leigh L Klotz, Jr. [EMAIL PROTECTED] wrote:
For Windows users who don't currently run a Spyware detector but are
considering doing so now after being alerted by this discussion, please
be careful when picking one as there are many free download programs
which claim to
No problem here with Norton, Ad-Aware or Spybot
Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
Hi all, especially those who have assembled a K3 already (Eric, Wayne,
and the Elecraft FTers invited to answer as well):
Okay...so here I am in the K3 queue, getting ready. I have picked up
an ESD mat and wrist strap, some new Phillips (those I have were
pretty beat up), and now I'm bothering
I have four DMMs and four or five VOMs. If you need digital
readability or high input resistance a DMM is good. I won't bother
with one to make resistance checks and the like when my K3 comes. I'd
have to go look for one of my DMMs. A couple of the VOMs are within
reach. Of course I may be
Hello,
I just put a couple more K3 pix on site ...
http://wilcoxengineering.com/K3sn40.aspx
As soon as the missing modules come, I'll be moving forward again. :)
Cheers,
Alan
--
Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701
In a message dated 11/21/2007 11:05:45 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hi all, especially those who have assembled a K3 already (Eric, Wayne,
and the Elecraft FTers invited to answer as well):
Okay...so here I am in the K3 queue, getting ready. I have picked up
an ESD
On Nov 21, 2007 7:04 PM, DOUGLAS ZWIEBEL [EMAIL PROTECTED] wrote:
Sobeing a classic ham and O.F cheapskate, what do I really need to
get the job done? If we are only talking resistance measurements (not
adjustments), what is really needed?
Greetings from a fellow cheapskate. Unless I
So I just finished scanning the assembly manual (and the KPA manual).
I found just 6 times where a measurement is called for
using a multimeter (all found in the assembly manual, none in
the KPA manual).
And all six are just resistance checks (2 on page 32, 1 on
page 41, 3 on page 42).
On Wed, 21 Nov 2007 14:16:50 -0500, you wrote:
I have four DMMs and four or five VOMs. If you need digital
readability or high input resistance a DMM is good. I won't bother
with one to make resistance checks and the like when my K3 comes. I'd
have to go look for one of my DMMs. A couple of
Doug
I used the most basic of digital multi-meters to check out my K3 when
assembling it, the meter cost the equivalent of $5 about a year ago!
You only have to do some basic resistance checks, nothing fancy.
You will need a power meter and a 50 Ohm dummy load, for the basic K3/10
one that
Be very careful of any old VOM's around modern gear!
For resistance checks they often used sufficient voltage and current to
destroy modern i.c.s
Even though you're only looking for a short circuit, if you do NOT have a
short, whatever voltage/current the old VOM delivers will be placed across
I have been in contact with Dick, K6KR, the author of the updater
program who is travelling some distance and is away from a PC. Dick
asked if I could update the Reflector with our findings.
While Spysweeper reports a problem on my PC it seems that others are not
seeing anything with other
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Happy Thanksgiving to All
And especially to the entire Crew at Elecraft, you deserve a rest!
73, AL WA6VNN
**Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)
I second that - Elecraft (on behalf of Wayne :-) - take a break.
I may be waiting for my rig, but not at the expense of your sanity - Happy
Thanksgiving
On 21/11/07 19:54, [EMAIL PROTECTED] [EMAIL PROTECTED] sent:
Happy Thanksgiving to All
And especially to the entire Crew at Elecraft, you
Missing the reference oscillator, and that's a bit of a show stopper!
--
Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701
[EMAIL PROTECTED] wrote:
In a message dated 11/21/2007 10:41:34 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hello,
I
Dave...
In Spysweeper go to the windows system tab and uncheck the auto shield for exe
programs. The system should then ASK if you want to continue when you attempt
to
run an exe file. That's what I had to do and it worked fine.
-
73,
Greg - AB7R
Whidbey Island WA
FWIW
I never had a virus that was as bad as an Antivirus
program...
Keep a GHOST image and simply restore as needed...
[Elecraft] Latest updater reported as Spyware - update
Greg - AB7R ab7r at cablespeed.com
Wed Nov 21 17:29:56 EST 2007
Dave...
In Spysweeper go to the windows system
Hello Guys,
K3 Serial Number 78, located in Germany, is up and working.
I finished to assemble my K3 (ordered 04/30/07, shipped 11/15/07 and
delivered 11/19/07) without any serious problems.
The only thing you should consider... RTFM !
Even if a step seems to be not necessary or wrong... do each
Ordered April 28/29 via FAX with deposit. Factory assembled K3/100-F Serial
#83 was shipped yesterday afternoon and delivered via UPS Overnight this
morning (November 21). 73 es gud dxing -- Don N4HH
___
Elecraft mailing list
Post to:
- Original Message -
From: Frank Van Cleef [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, November 21, 2007 4:12 PM
Subject: Latest updater reported as Spyware
Hi Dave,
I had the same kind of problem, and I run Spy Sweeper version 4.7 with
automatic database
We have just posted the latest versions (Rev C) of the K3 Assembly and
Owner's manuals to the web site. These new manuals incorporate customer
feedback from the first 100 K3s shipped. Thanks for the suggestions!
73, Eric WA6HHQ
http://www.elecraft.com
We have just posted a new revision (A4) of the K3 programmer's reference
on the manual download web page at http://www.elecraft.com
73, Eric WA6HHQ
---
P.S. Have a GREAT Thanksgiving! (And a super weekend if you are outside
of the U.S. :-)
___
Congrat's to Elecraft on shipping the first 100 K3's !!
Would imagine it is going to be a busy week ahead shipping the remaining 100
from Run#1 prior to the 30/Nov.
Keep up the good work !!
David, VK2NU
___
Elecraft mailing list
Post to:
A friend who bought a used K2 created a Reference Guide to help
fqmiliarize himself with the K2 buttons and the menu functions. He has
generously allowed me to post his work on my website.
It can be found right now at www.qsl.net/w3fpr - scroll down on the
opening page a bit and you will find
David,
Yes 100 units is a big accomplishment...congratulations to Elecraft.
Yes I remember production run
1 was increased to 200 units also.and to think there is still 100 to go
before #2 starts.
I guess anyone in production runs 2 and 3 still have a lot of waiting before
theirs
... K3 SN 00067 is alive and well!
My heartfelt thanks to Eric, Wayne, Lisa, Scott, the developer team, the
field testers and all the people who packed the fortune cookies!
vy 73 de toby
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
[My apologies if you're receiving this message twice. We posted to both
the Elecraft reflector and to our list of present K3 owners to make
sure everyone affected learns of this firmware release.]
Our newest firmware release for the K3 (MCU revision 1.41) has many
significant improvements,
Gents:
I feel that the rumors are getting off track again.
As I recall (which may not be perfect), but in the very beginning, it
was posted that (paraphrasing), If you place a 50% deposit, you can
have a SN in the first 200. There was never any statement that 200
was the size of a
I think you may be wrong in expecting it before the December
holidays, I am in the first run and figure I might get mine just before
that.
Ordered May 2nd and paid the deposit, and so far I have heard nothing.
After the email arrives, its 5 to 10 business days or something before it
ships,
then
Eric or Wayne, correct me if I am wrong or the
shipping status page is incorrect, but the shipping
status page now says:
2nd Production Run K3 shipments are targeted to begin
shipping the week of Nov 30th. Sold out.
That is fresh information as of November 19th and
indicates to me that they
I'm in Ventura, CA tending a sick brother in the hospital. Looks like I'll
miss Thanksgiving at home. But I talked to the XYL yesterday, and a package
arrived at home. Guess what! My K3 arrived! What's strange is that I did
get a preliminary message about my invoice, but no message saying
FWIW my serial number was written in pencil in the upper right corner of my
invoice that came with the K3. That might be the easiest to find.
I think the serial number envelope was in the miscellaneous parts bag. It
was near the bottom of the bigger box of subassemblies, not the small box of
47 matches
Mail list logo
