If you are thinking of the DEM kits - I build them on order.
1296 transceiver is not available from DEM while they re-design it.
http://www.kl7uw.com/kits.htm
I have DEM transverters for 144, 222, 432, and 1296 in use with my K3/10.
Contact me off the list if you need some set up help.
Gary,
What you are envisioning is a perfect example of an idea that can
become a new niche product. If Elecraft chooses to not develop the
concept, there is no reason that it cannot be done by someone else.
For example: fabricating a cage for docking several transverter
boards. I'm
Just wondering if crossband is possible without significant hardware changes
for those who have transverters or a second receiver.
73, Jim KG0KP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The K2 and K3 have near perfect equal key ON/OFF delays. Therefore, the
K3 and K2 will not normally need external keyer delay compensation.
The KX3 (measured with MCU 1.50 / DSP 1.21) has about 8 ms key ON to OFF
delay. The delay is for both the internal and external keyers. (Breakin
mode, XMIT
Will the KX3 features:
- CWT mode enables FINE tuning
- SPOT with RIT enabled tunes RIT, not VFO A
be ported to the K3?
John KN5L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Corrections:
On 08/24/2013 06:53 AM, John Oppenheimer wrote:
Will the KX3 features:
- APF mode enables FINE tuning
- SPOT with RIT enabled tunes RIT, not VFO A
be ported to the K3?
John KN5L
__
Elecraft mailing list
Home:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Could you describe what you are seeing - or, perhaps send a picture? I
had problems early on with my P3 and it was just a lousy patch cable
(between the K3 and the P3). I replaced the patch cable and all has been
fine since then.
Bill W2BLC
How many of you have an Elecraft DL1? It's an amazing piece of test
equipment for only $26 when coupled to an accurate DVM.
The DL1 is a simple 50 ohm dummy load with a peak detector diode. The
load on the diode is the input impedance of the voltmeter, normally
10 Meg Ohm, which results with a
Seems I remember the ARRL issuing a warning not to run phone patches for them
as they were conducting church business. Think I had a card from the
mission but it was lost in a flood in 1989.
73 Tex
ka5y
--
View this message in context:
Hi Hisashi,
From the photo is looks like you have your REF LVL set too high. The base
signal (noise level) should be slightly below the dividing line between the
upper display and the waterfall. Press the REF LVL button and turn the
SELECT knob counterclockwise until the noise level just
End of Thread. We're drifting a little too far OT.
73,
Eric
List Modulator
elecraft.com
_..._
On Aug 24, 2013, at 6:36 AM, pkhjr k...@yahoo.com wrote:
Seems I remember the ARRL issuing a warning not to run phone patches for them
as they were conducting church business. Think I had a card
I am reluctance to reply on here as the reflector seems full of trash
these days. But yes, John, I wholeheartedly agree with you; the DL1 is
excellent and well worth buying at that price. Rated at 20W it is ideal
for setting up the K1, K2, KX1, KX3 and K3/10.
73 de David G4DMP
On 24/08/2013
Hello Hisashi,
It looks like you have a very high noise level, or, you never ran the
level calibration for the P3. Other than a few blips on the right half of
the screen, I don't see any signals, so I wouldn't expect to see much of
anything in the waterfall either.
That said, you can put the
Hi all,
Ham Fair 2013 in Tokyo is held today and
tomorrow.
Elecraft equipment is not displayed at any
commercial booth so far.
We are demonstrating 6m outdoor operation
style using KX3 at the mountaineering booth.
I hope Elecraft will join the fair next
year.
Jun JI1TLL,
Selling LP-Pan panadaptor + recommended soundcard E-MU 0202 (see
telepostinc dot come for detailed setup info). LP-Pan serial #080 was
assembled and tested/aligned by Larry N8LP. He also has the LP Pan mod
kits IOT use with K2 plus other rigs; these are approx $15 including
shipping in US. See
Two possible causes for spurious signals on the P3 are
1) A bad coax jumper with a non-continuous shield (Elecraft had some at some
point) , and
2) paint on the inside of the enclosure where the parts are joined.
Try a new jumper cable and make sure the mating surfaces of the enclosure are
Aha. Things look quite different on both monitors, and as George Danner
pointed out, SVGA bias can be turned down to amke the display on the
SVGA look the same as on the internal monitor. Default is 9.9, I think,
and I turned it down to 1.2 at his suggestion.
Of course, my REF LVL needed
Hello all,
I have studied the prior posts about KX3 and PSK31 but I am still not
getting it.
1. The other day I succeeded in setting Mic Btn to OFF but today when
I go to the menu the only choices for Mic Btn are PTT and NR - OFF no longer
shows up as a choice! Where did I go wrong?
2.
http://k4mtx.wordpress.com/2013/04/11/kx3-fldigi-setup/
this is the easiest setup... this will get you up and running on bpsk31
in no time
--
R.Neese
KB3VGW
__
Elecraft mailing list
Home:
Hi Julie,
On 2) you can do it, but you have to be careful. Any of the system
beeps or startup sounds may go out over the air, and you don't want that.
You don't need an elaborate USB sound card, but using one avoids making
mistakes.
73 -- Lynn
On 8/24/2013 8:28 AM, Julie Royster wrote:
Hi Julie,
A lot of laptops these days are using those annoying combo jacks, which
instead of having a tip, ring, and sleeve, have a tip two rings, and a
sleeve, putting the mic-in and stereo headphone-out connections one a
single jack. Splitters are available online, but I have not been
Excellent post, John. You don't mention that there is even more useful
information about this on your web site.
I have always thought it would be very useful for Elecraft to post App
Notes of this kind about all their mini-kits. I know several people who
have built them seemingly to satisfy
Julie,
I am still a newbie too, it'll happen. I use an iMic on an Macbook Pro with
Fldigi software. It is very easy to use.
On Aug 24, 2013, at 6:00 AM, elecraft-requ...@mailman.qth.net wrote:
1. The other day I succeeded in setting Mic Btn to OFF but today when
I go to the menu the
Julie,
First of all, I assume you are trying to use the KX3 with a soundcard
application like FLDIGI with the KX3 in Data A mode??? Operating in the KX3
PSK mode (PSK-D) is a bit different, and only certain software packages support
it.
Re: The other day I succeeded in setting Mic Btn to
My friend uses the K3/0 to connect to my K3, and that works fine.
But when I use my K3, I use Ham Radio Deluxe which would normally connect to
the 9 pin RS232 on the back of my K3, but since I have one of the remote boxes
connected to my K3 9 pin RS232, I would use the com1 on the front of the
Elecraft shipping and production will be closed for fiscal year end
inventory from Aug. 29 to Sept. 3. Shipping will resume on Wednesday,
Sept. 4.
Every effort will be made to ship orders received between Aug. 29 and 8
am PDT Wednesday, Sept. 3, by the end of the day Wednesday.
You will
On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch sabert...@gmail.com wrote:
My friend uses the K3/0 to connect to my K3, and that works fine.
But when I use my K3, I use Ham Radio Deluxe which would normally connect to
the 9 pin RS232 on the back of my K3, but since I have one of the remote
It works!!! FANTASTIC!!! Thanks so much iain. I had to make the baud rate
change to 38400. It was set to 9600.
73, Steve K6SAB
On Aug 24, 2013, at 11:00 AM, iain macdonnell - N6ML a...@dseven.org wrote:
On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch sabert...@gmail.com wrote:
My friend
Many laptops have stereo line in and mono mic in.
I think even my old Pentium 4 Dell laptop had stereo line in.
PSK31 should be quite easy. Re-read the digital section of the manual and you
should be able to get it going.
ALSO note that many button presses or menu items are mode specific.
Can someone point me to the location or send me a cabling diagram for
connection all three devices.
I need to make sure I have or order all of the required cables and Y's to
have full operability of the system.
Thanks and 73 Bill W4RM
Bill,
The proper wiring diagrams are in KAT500 (p. 5) manual, available for
download from Elecraft's web site.
KAT500 -
http://www.elecraft.com/manual/E740183%20KAT500%20Owner's%20Manual-%20Rev%20
C.pdf
Hope this helps, and gud luck.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
Figure 1 on page 5 of the KAT500 owner's manual (I'm looking at revision C).
If you have other things to connect to the AUX connector you may need a Y.
For the basic K3, KAT500, and KPA500 you don't need any Ys, you just need
two of the 15-pin accessory cables.
73 de Dick, K6KR
-Original
The email account I use ONLY for the Elecraft List was hacked.
I apologize for any spam you may have received.
Sorry and 73,
Don NA6Z
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
A friend runs an IC756 Pro III, and recently got a KAT500 tuner. He likes
it, but when he presses the tune button on either the tuner or the radio,
the tuning solution is not always a good one... when he then keys the
radio, a better solution is sought. He believes the problem is that the
Icom
I've been watching this K radio wish list thread and I liked where it went.
I too would like to see a new Elecraft KV3 as a technical update to the
venerable Yaesu FT-736r. Some features of interest are:
- Dual simultaneous receive; switchable among the VHF bands; 50 and 144 as
a minimum.
You don't need an elaborate USB sound card, but using one avoids
making mistakes.
You do if you use the I/Q port and a laptop as most mic inputs on
laptops are mono.
so using a usb sound card should give you stereo mic inpu for i/q audio.
If you check and make
sure the usb has stersio mic
Maybe I'm missing something. My reasoning for a second sound card is
keeping the system sounds going out over the air.
On 8/24/2013 3:15 PM, Richard Neese wrote:
You do if you use the I/Q port and a laptop as most mic inputs on
laptops are mono.
so using a usb sound card should give you
Turn them off, that's what I have done. Mostly they are just ear wax.
Regards,
Mike VP8NO
On 24/08/2013 21:42, Lynn W. Taylor, WB6UUT wrote:
Maybe I'm missing something. My reasoning for a second sound card is
keeping the system sounds going out over the air.
Agreed, but I use my computers. They're business tools and not something
that I dedicate solely to my hobby. I know that's a little different
from most here.
A relatively inexpensive USB soundcard is cheap insurance -- and an
expensive soundcard is still cheaper than another laptop, and one
Lynn,
Not only keeping the system sounds from going out on the air, BUT ---
If you are using a laptop, the internal sound card typically has only a
Mic level input (no line-in).
With a mic level input, the KX3 (or K3) will overdrive the mic input
unless you provide an attenuator in the line.
Hello,
I just got a lipo charger and 3S packs for my MTR and K1, but I wonder if a 4S
pack could be used with my KX3? The voltage is presumably 14.8V, but I assume
it would be a little more at full charge..? Is anyone using a 4S battery pack
with the KX3?
I guess I could use one or two diodes
Good Evening,
During this week summer changed to fall. Nights were crisper and
the smell of the forest has changed. Luckily it has been a fairly moist
year with all of the fog. Very, very little rain but when the fog rolls
in the trees rain on themselves. Fire danger has not gotten very
Last Sunday's net was particularly large with 48 check-ins.
Participants from the 8/18/13 net follow:
Station NameQTH Rig S/N
N6JWJohnCA K3 936
KM4IK Ian GA K3
My last desktop machine died in 2006. It led a long and useful life, at
least two standard eternities.*
... but I realized that my laptop was twice as powerful as my desktop,
so I just switched -- and haven't looked back.
73 -- Lynn
* In computer terms, one standard eternity is three years.
45 matches
Mail list logo