If you’re considering selling yours send me the details - off list.
Thanks
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
If you want to quantify the CW element lengths and timing as they appear
in the sidetone audio try an app called Precision CW Fistcheck. It
displays a graphical representation of the individual code elements.
73,
Drew
AF2Z
On 09/23/15 15:10, David Bunte wrote:
A friend is having an issue
Two more items to keep in mind from another (semi) rural resident:
1) Power pole lightning arrestors can deteriorate or be damaged by a strike
and cause leakage/arcing. (Note that the noise from this can be intermittent
rather than constant.) That happened on a pole near me. I walked around the
Is a Direct TV / satellite receiver involved? I have experienced RF
getting into the Direct TV / satellite receiver causing it to change
channels, turn on and off, and reset. It is the fact you are radiating
RF which is the desired intention and this RF is getting into the
"plastic box" of
Al's point is very well taken.
I've encountered more than one device that is "Part 15 Compliance", when
indeed measurements confirm it only has the "Part 15 Label". With
companies performing self certification, first there is no assurance the
results are accurate and second, manufacturing
I had the same problem and it occurred on 40 meters regularly as well. Low
power (~80 to 100 watts) did not seem to bother the TV but it was a regular
problem at power’s much over 100 watts.
My solution which seems to work flawlessly so far with max power of 600 watts
is that I took a whole
I'm helping out K7BTW with his K1 kit; we've got it assembled and tested to the
point of #7 - Alignment and Test. We have done all of the somewhat static value
checks and tests up to this point.
When we turn the unit on (with no smoke or heating parts), the ATTN yellow
light comes on, then off,
Need a schematic of CBLP3Y cable.
K3S comes with E980297 cable (RJ45 in K3S to RS232 in P3).
Now the need is connection between those two RS232 to P3 (PC and XCVR).
No point in ordering CBLP3Y cable. Price 30$ is OK, but postage 50€ is not.
BennyOH9NB
---
Avast Antivirus on tarkistanut
On 40m my TV turns off and on by itself when I transmit. I'm thinking that
it's related to grounding because I've not figured that out yet. I have a
roof mounted mast that holds my dipole. The coax comes down through the
roof, routes through the attic down inside the wall to the station. I've
been
Jindra,
check the KYn; response for error / success. See manual re. the KY
command. Might be a buffer overrun ? The buffer is limited to 24 chars
according to the specs.
73
Gernot, DF5RF
Am 26.09.2015 um 20:18 schrieb Jindřich Vavruška:
Hello,
I am programming yet another utility to control
Wow, good info ty. I'm not sure why it's a problem now. My prior rig wasn't
nearly as nice as the K3S and the XYL never complained about me
transmitting.
I'll figure it out. I guess I'll end up taking my Samsung TV apart.
-Original Message-
From: elecraft-boun...@mailman.qth.net
Dale, if you use a handheld that can do AM on VHF or UHF and walk the
fence you will find it pretty easy to locate the bad joint(s). Once they
are fixed the noise goes away.
For Wire fences I put a little grease on the join after I remake it to
discourage future corrosion. For tape and string I
Have a nice K2-100 with External Kat-100 Auto tuner FSIf interested contact me
at kf...@arrl.net.Thanks! 73! Tomy KF7GC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
You might just add a 0.05 mf 600V capacitor between the black to ground
and a 2nd one from white to ground at each light. Likely the Romex
comes into the box and the lamp is wire nutted on. Should be pretty
easy to figure out how to install a couple of bypass caps.
Before working on this,
Instead of a clip-on ferrite, if you're going to have the box open anyway
might running the hot and neutral through a small ferrite (core or sleeve),
or in addition to the bypass caps, possibly correct the problem?
73, Al
On Sat September 26 2015 7:22:23 pm Bob McGraw - K4TAX wrote:
> You
K3 #4519 is still for sale to make room for a new K3S:
-100 watts
-ATU
-General Coverage RX module
-2.1 Khz 8 pole filter
-2.8 Khz 8 pole filter
-400 Hz 8 pole filter
- 6 Khz 8 pole filter
-13 Khz FM filter
-TCXO
-KXV3A Rx Ant, IF Out & Xverter interface
-PR6-10 Preamp
Price reduced to $2750
My problem with stray RF isn¹t the TV or other electronic appliances, but
with the exterior motion sensor lights. 500 Watts on 20 meters turns one
of the three pairs on (always the same one). Since they are hard-wired
into the house, clip-on ferrite would be hard to do. I can live with it
if I
Ken WA8JXM etal
Yes; agree. I've been thinking about a remote site 15 miles from town
and purchasing a K3 MINI. My first task is to check out the area noise
and internet connectivity wise, if any. If those are good.then maybe
Hi & 73 Phil, W0XI, Lawrence, KS
I would think it is more related to the susceptibility of the TV to RF
than to any grounding issues.
You could try ferrites on the TV power and all other cables.
73,
Don W3FPR
On 9/26/2015 1:41 PM, ae...@carolinaheli.com wrote:
On 40m my TV turns off and on by itself when I transmit. I'm
The problem has nothing to do with grounding.
RF is getting into the house wiring. I suggest adding a choke balun at
the feedpoint of the antenna to reduce "RF in the shack" and wrapping
the power cord of the TV around a ferrite rod, toroid or bead for
several turns. Google K9YC's RFI
Hello,
I am programming yet another utility to control KX3 and I encountered a
strange (inconsistent) behavior.
In digital mode contest traffic it is necessary to switch to RX immediately
after exchange has been sent. I learned that the way to do this is to
send KYW;RX; to the serial interface.
I had a direct lightning hit on one of my towers recently. Wiped out
several PC's, monitors, etc. Everything connected by rs-232 and or rj45
jacks got fried. That included the K3! Elecraft service said send it in
and it would take about 5 weeks in the shop. Yesterday was 5 weeks to the
day
Be sure the RJ-45 portion of the K3S<->P3 "Y" cable is fully seated.
Sometimes the rubber boot slides a bit on the connector and it appears
to be fully mated, but isn't. It must be seated until the plastic tab
on the RJ-45 clicks.
There is a jumper connection in the RJ-45 connector on this
Byron,
The way you have it connected now, you have to use two "COM" ports, one
for the K3S and another for the P3. It would be better to use only one.
Since you have a USB to serial adapter working with the P3, I suggest
you remove the USB cable (unless you are using the internal K3S
Is there some place from which I can purchase the mic holder “ring” that
attaches to the MH3? I’m not talking about a hook you mount on a shelf or
something, but the actual ring that goes on the MH3 itself?
Thanks,
Joel - W4JBB
__
The issue turned out to be an OPEN RFC6 on the RF board, so no 6v to the RF
board. I suspect that the Key In line (powered through a voltage divider) or
some other line was presenting something the CPU couldn't deal with
(algorithmically).
Careful measurement of all of the voltages pointed us
I found a workaround by using the Elecraft RJ-45-to-Serial cable and a
separate PC-to-P3 USB-to-serial.
I am uncertain how to test the RJ-45-to-Serial cable, but at least it no
longer "breaks" my K3S to PC USB.
Data Terminal Mode in the P3 seems like a secret, but I'm hunting for it
now. 73,
Have a great day,
--... ...--
Dale - WC7S in Wy
> Date: Sat, 26 Sep 2015 11:32:42 -0500
> From: aldenmcduf...@sunflower.com
> To: wa8...@gmail.com
> CC: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] experience with CW and settings
>
> Ken WA8JXM etal
>
> Yes; agree. I've
I thought you loved that place.
73, Guy.
On Sat, Sep 26, 2015 at 10:45 PM, Fred Jensen wrote:
> Scare the wildlife ... that's good, we've had it with "Nature." We just
> sold the "farm," in part because the two jack rabbits had taken up
> permanent residence in the
It says OT right at the beginning. That said, I believe this might be of
interest to many Elecraft owners, particularly considering the QRP DNA of the
founders and many of the faithful.
Personally, I'm in favor of more nuclear power and I live in Arizona, where it
is alleged that solar is the
Scare the wildlife ... that's good, we've had it with "Nature." We just
sold the "farm," in part because the two jack rabbits had taken up
permanent residence in the garden, the deer munched lunch on the roses,
the big and little raccoons kept turning over Andrea's many pots, the
flock of 30+
Good advice, both on the caps and pulling the breaker and checking that
it's dead. Of the 38 24 VAC irrigation valves I had [before we sold the
farm], 6 were directly under my low band sloping V and I turned them on
and off at 30 WPM which is not an approved code speed for Irritrol
valves.
On Sat,9/26/2015 10:41 AM, ae...@carolinaheli.com wrote:
Thoughts /comments?
You're kinda out there in thinking about this. First, study
k9yc.com/RFI-Ham.pdf and http://k9yc.com/GroundingAndAudio.pdf
One of the most susceptible consumer circuits are those used for
touch-sensitive control
Fred,
Not sure at all about your "cure", however, the preamble was nothing short of
hilarious and left me giggling till I finally ran out of breath and had to lay
down and concentrate hard on slow deep breaths.
Brilliant!
Thank you for making my Sunday even better.
73
Gary
-Original
We did, for 38 years, and then we got old.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org
On 9/26/2015 7:50 PM, Guy Olinger K2AV wrote:
I thought you loved that place.
73, Guy.
Your grounding plan sounds fine, *if* and only if you connect that
separate ground rod to the utility entrance ground rod using a #6 or #4
copper wire - that wire should be buried several inches and run outside
your dwelling foundation.
That connection is a NEC requirement and is necessary for
Benny,
You may have to contact K3support for that schematic.
73,
Don W3FPR
On 9/26/2015 2:30 PM, Benny Aumala wrote:
Need a schematic of CBLP3Y cable.
K3S comes with E980297 cable (RJ45 in K3S to RS232 in P3).
Now the need is connection between those two RS232 to P3 (PC and XCVR).
Let me summarize my tests in hope someone has an idea.
1. I have followed the instructions.
2. I am using the proper cable.
3. As far as I know.
It seems simple.
1. Set K3S CONFIG:RS232 to USB. Connect USB between computer and K3S.
[CHECK]
2. Connect CBLP3Y to P3 (top+bottom) and K3S RJ-45
Jerry,
I had this exact problem on 40m with a 42" Samsung LCD tv. I finally got
it working, but here's what I tried that ultimately proved useless:
-- Added a counterpoise on the floor of the shack for 40m
-- Added ferrite cores on all cables connected to the tv; power cord HDMI;
audio line out
39 matches
Mail list logo