Hello all,
I want to know if someone here is using the DigiMaster Pro and If I could
get some advice on how to do the right audio cables myself so to be able to
use it with WSJT-X. I've got already the CAT one. This is the interface:
http://www.g4zlp.co.uk/unified/DM_PRO_PLUS_complete.shtml
Is
When you hear the others sending their call or "hail" sign just send
yours. Usually I'll get alerted to you by the other ops. Today I was
getting comments about how folks were hearing which did not match what I
was hearing. I was in the middle of a torrent of rain from my trees.
The sun was
Yes Don. They sent me 4 trimmers that look identical to c22 on the control
board.
No red body trimmers.
From: Don Wilhelm
To: Chuck Stover ; Robert Kasten ;
"elecraft@mailman.qth.net"
Sent:
Usually if I hear a caller that Kevin doesn't I'll QSP. Tonight we had a couple
of tuner-uppers and a CQer on frequency that made it tough. Keep trying.
73,
Brian, K0DTJ
__
Elecraft mailing list
Home:
Net control, KD5ONS in Oregon, was S5-S7 with fast QSB in the Dallas, TX
area. Had pretty good check in tonight.
Dave, W8OV
On 2017-02-26 19:29, Marvin Wheeler wrote:
I listened to check in to the 40 meter net. I could faintly hear the net
control station but could not copy his
Harry,
The yellow ones do not go reliably down to 6.8pF, many are limited to a
minimum capacity of about 15pF.
The capacity for the 12 meter bandpass needs to be in the 11 to 12pF
range or less.
Yes, I have measured several of them. I went through this as the tester
for Elecraft when the
Ted,
I thought the errata sheet was up to date. We'll look into this tomorrow.
Thanks,
Wayne
N6KR
http://www.elecraft.com
> On Feb 26, 2017, at 17:18, Dauer, Edward wrote:
>
> I went through the same business with my first K2, apparently during the
> switch-over of
Ditto Marv,
Same report here in Bremerton, 15 miles W of Seattle.
Doug, K7CUU
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Marvin
Wheeler
Sent: Sunday, February 26, 2017 5:30 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Sunday Net on
I listened to check in to the 40 meter net. I could faintly hear the net
control station but could not copy his transmissions here in Washington
State. Most California stations were at least 5 7 or 5 9 but I didn't hear
anyone ask for relays to check in.
Marv
KG7V
---
This email has been
I went through the same business with my first K2, apparently during the
switch-over of trimmer suppliers. None of the colors matched what they were
supposed to be and the errata sheets didn’t help at all. Don Wilhelm and Gary
Surrency both went out of their way to help me sort it out.
Just tried with an old dynamic Kenwood mic.
Setting K3 mic to "rP.L" gave same result: no output.
Receive and eveything else works fine.
P-T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Remoterig-K3-0-MIC-connection-tp7627375p7627409.html
Sent from the Elecraft
I would think it would be best to use:
The Yellow (ones 6.8-45pf) at C44 & C46 (10/12 m) since the schematic calls
for 5-30pf
The White with Red dot ceramic trimmers (8-50 pf) at C19 and C23 (20/30m) since
the schematic calls for a 50pf trimmer
C32 and C34 should also be 5-30 as per the
Chuck,
WHAT?? Did you have 4 ceramic trimmers with red dots on the side? The
same as that used for C22 on the Control Board? Those normally will not
work for the 12 meter bandpass at C44 and C46.
The large yellow plastic trimmers should go at C32 and C34, and the
ceramic trimmers with
They are no longer giving out the Red Bodied ones
They not give you 2 more ceramic 8-50 pf ones
From: Robert Kasten
To: elecraft@mailman.qth.net
Sent: Sunday, February 26, 2017 6:41 PM
Subject: Re: [Elecraft] K2 12m alignment
Indeed, I have the brown
Thanks Bob, that was it (I was at MCU 5.50). Updated to latest and changed
LIN OUT back to NOR, and it works exactly how I wanted. I also found a
powerpoint presentation out on the web that you did for CTU on the subject
of recording contest audio - very informative. Thanks! Guess I need to
Bob, Don,
I just finished up a K2 as well. The trimmers I got didn't match the
description in either the manual or errata, so I wasn't sure what I was looking
at.
I had to use clip leads from my cap meter and got too much stray stuff going on
to accurately measure min and max.
I talked to Gary
i see people confusing Lipo with LifePo4
two different chemistries.
would you not agree that one benefit of Lipo 14.6 batteries is their voltage
being above the 13.8 spec?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent:
Indeed, I have the brown trimmers at C32/C34 as well as C44/C46. The latest
errata sheet from Nov 2016 says C44/C46 should have red bodies and be about
25pf. The ones I have do not go below low-30pf. Thanks for the help, Don!
Bob
On Sun, Feb 26, 2017 at 5:10 PM, Don Wilhelm
Bob,
You have too much capacitance at C32 and C34.
Contact Elecraft support and ask them to send 2 trimmer caps to replace
C44 and C46. The ones you have with your kit do not have a small enough
minimum capacitance. The p/n you need is E540011 and the bodies were
red the last time I saw
On Sun, Feb 26, 2017 at 12:24 PM, Mike Cox wrote:
> If CONFIG:PB CTRL is set to .01 in CW mode, then, per the function
> description in the K3 Owners Manual (pp. 62 in Manual Revision A1), you
> will be limited to the Shift/Width controls mode only. Change PB CTRL to
> .05 and you
Finished my K2 in the last few days and really enjoyed the build. It was
just like old times.
All bands except 12m have aligned OK...but I cannot get any more than .5W
output on 12m - no matter the C44/46 trimmer cap settings or the power
setting. And while it not fun, I pulled components
Re: " I have excactly (sic) the same problem with the big MFJ-927 tuner and
the preprogrammed chip replacement from the company made no cure"
No, wait, what??? You have the same problem with a tuner make by a different
manufacturer? It is time to start looking for items that are in your
This may be a duplication in the process. The email you folks sent, stated, if
I wanted to post, I needed to send a request to this email.
dave
KK4CNF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Thanks Doug and Brian,
In the last half hour I have also found the same type of adapter for both
European (Schuko) and US mains plugs on the same auction site.
73 Stephen G4SJP
On 26 February 2017 at 20:29, Brian Hunt wrote:
> Good find! Thank you.
>
> 72,
>
Good find! Thank you.
72,
Brian,K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Don, Jim, thanks.
Could be a processor, agree. Paradoxically, I have excactly the same
problem with the big MFJ-927 tuner and the preprogrammed chip replacement
from the company made no cure, :).
The buttons seems like working for they do switching during the test mode.
I'll definetely write to
Are you sure the push button switches are working?
Jim ab3cv
On Feb 26, 2017, at 2:31 PM, Don Wilhelm wrote:
Linas,
It sounds like a microprocessor problem, but I can't be sure.
Do you know of any locals who also has a T1 and would be willing to try
swapping the
Linas,
It sounds like a microprocessor problem, but I can't be sure.
Do you know of any locals who also has a T1 and would be willing to try
swapping the microprocessor?
It may be heplful to contact Elecraft support even though you may not
want to send it in for repair.
73,
Don W3FPR
On
Can it be the Remoterig settings are incorrect?
P-T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Remoterig-K3-0-MIC-connection-tp7627375p7627391.html
Sent from the Elecraft mailing list archive at Nabble.com.
If f.ex. both K3 and K3/0 has the tx equalizer set, will their effect be
added?
P-T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Remoterig-K3-0-MIC-connection-tp7627375p7627390.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hello,
My Elecrat T-1 mini-autotuner stopped working after some 10 years of
flawless service...
It started behaving erratically , it either does not react to the RF input
, or if it does then never finds the tune ending up with the red LED on.
It is not related with the antenna type, it is all
If like me you are rather horrified to find that the Li-ion charger and
cable for the KX2 takes up more space in a bag than the transceiver itself,
I've just found one of these adapters which replaces the cable completely.
No doubt similar adapters exist for other mains plug designs.
Chuck,
Looks like your reply didn't go to the list, so I'm quoting it below for
the benefit of other readers.
It looks like KG6IRW has the solution. From the Owner's Manual Errata:
"IF THE SPEAKER IS NOT WORKING with headphones unplugged: Locate the
CONFIG:SPKR+PH menu entry. Tap ‘1’ on the
If CONFIG:PB CTRL is set to .01 in CW mode, then, per the function
description in the K3 Owners Manual (pp. 62 in Manual Revision A1), you
will be limited to the Shift/Width controls mode only. Change PB CTRL to
.05 and you will also enable LO/HI cut on the controls.
73,
Mike
On 2/26/2017
Hello F5VJC,
Yes! You are correct. Thank you. That solved the problem.
73, Ted W4NZ
From: F5vjc [mailto:foxfive@gmail.com]
Sent: Sunday, February 26, 2017 11:48 AM
To: Ted Bryant
Subject: Re: [Elecraft] K3 Receiver mush
CONFIG PB CTRL SHIFT (set to .05) if set to .01
Thanks Joe, Randy and Ken. But the CW QRQ says it is OFF. There is no "+"
showing, either.
73, Ted W4NZ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: Sunday, February 26, 2017 10:29 AM
To: elecraft@mailman.qth.net
Never mind...
Walked back through the setup and realized I hadn't set the installed SubRX
filters on all modes... just CW.
All seems fine with the SubRX now.
73 de Chuck, WS1L
On Sun, Feb 26, 2017 at 9:50 AM, Chuck Chandler
wrote:
> Well, the Sub receiver was installed
Thanks, John. This fits with what I have assumed.
I would like to try connecting the mic directly to the RRC-control, but I do
not have the reqired adapter.
We'll see...
P-T
--
View this message in context:
Well, the Sub receiver was installed this morning, filters and config
seemed to complete without problem.
However, the Sub-RX does not seem to be getting any signals. I see the
Ant=Main when I use B-Set, so it should be sharing the main antenna.
Any suggestions? Nothing pops out on the CONFIG
When the K3/0 is connected to the K3, the rP or Fp menu sets the condition
of the K3, not the K3/0.
When the K3/0 is not connected, the setting changes the K3/0.
But I have had much better luck with connecting directly to the mic input om
the RRC control, so try that if you can.
73 John N5CQ
I just found tha there is a comment on the K3 mic setting on the top of p.16
in the K3 Remote manual.
I have now changed my setting for K3 to "rPL". Not sure if it should have
been "rPH".
Does the setting of the K3/0 have any influence when in remote mode?
I find it a bit confusing that there
I am using 5.57 here and tapping either the shift or width
knobs causes the function to cycle between Lo/HI and
Shift/Width with the Green LEDs to switch as well.
73, Ken K3IU
~~
On 2/26/2017 10:13 AM, Ted Bryant wrote:
In playing with Bob N6TV's
Do you have QRQ mode selected (+ showing in the display)?
From the Owner's Manual, page 54: > Filter passband SHIFT/LOCUT/HICUT
cannot be used when CW QRQ is in
effect.
73,
... Joe, W4TV
On 2/26/2017 10:13 AM, Ted Bryant wrote:
In playing with Bob N6TV's suggested settings, I've
Hello,
I have a problem connecting a Heil headset to the K3/0-mini.
Guess it is a configuration problem, since it works OK if conneced directly
to the K3 in local mode.
I have tested it with the K3 MIC set to "rP.H bIAS" and K3/0 to "FP.H bIAS"
(configured when K3/0 was disconnected from
In playing with Bob N6TV's suggested settings, I've discovered that on CW,
neither the Shift->LO Cut nor the Width->HI Cut controls change functions
when tapped. They appear fixed at SHIFT and WIDTH. Tapping them merely
displays their current setting. On SSB, they change and work as expected.
My oldest k3, serial # in 200s has developed a quirk in key pad that #s 4 , 8
, and 9 no longer register when mashed.
Is this a simple fix regarding panel cabling seating? Or, is it more complex?
Any hints welcome.
73 de Al, W5IZ (also long in the tooth
46 matches
Mail list logo