your receive and
transmit frequencies in receive mode. Hold SPLIT to turn split mode on
or off."
Can someone explain what the manual is trying to say here and how
VFOA/B is being assigned to the subrx in diversity/split? Is the
subrx always assigned to VFOB or is there more flexibility than
in diversity split because of settling
time and needs for fast qsk.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mai
es the mic input
during DVK'ing (via software, turns mic gain to 0 during DVK'ing and
then restores mic gain after DVK'ing).
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the li
own and tested the QSK and can
report at how high a keying speed the K3 receiver recovers between
dits? The cw rise time and rx AGC settings used for the test would
also be useful to know.
Thanks & 73,
Barry N1EU
___
Elecraft mailing list
Post to: El
'm happily clueless about
them.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraf
he line. Yes,
topbanders use tons of it, but as long inexpensive receive-only
Beverage feedlines.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, s
Is there any numeric indication of the K3 rx bandwidth on the display?
I see the trapezoidal analog display of relative bandwidth, but if
the dsp bandwidth is set to 300hz, does the K3 indicate such directly
to the operator?
Thanks & 73,
Barry
ealize the work-around will be to adjust it in order to read
it.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/m
transmitting with 2.7Khz bandwidth? DSP filtering is not
being used to allow user selectable tx bandwidths less than 3.0Khz?
Thanks & 73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
the front in parallel with
the mic.
Hopefully there will be software support (N1MM Logger?) that will
enable rear line-in during DVK'ing and switch back to front panel mic
otherwise.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mail
, if the user goes the "y" route, they definitely need to add their
own isolation xfmr between soundcard and mic jack. I should have
mentioned this in my previous post.
73,
Barry N1EU
On Nov 19, 2007 1:03 PM, Lyle Johnson <[EMAIL PROTECTED]> wrote:
> Hello Barry!
>
> &g
Actually, for the K3 you should try
http://www.zerobeat.net/mediawiki/index.php/K3_Serial_Numbers
73,
Barry N1EU
>Try http://www.zerobeat.net/qrp/elowners.html
>Bruce Bowman, NM5B
>Santa Fe, NM
>> Sorry for the bandwidth, but I can't find the matching post. What is
&
I'm surprised to notice no provision for tx enable/inhibit signals
(qsk keying loop) on the K3. I'd appreciate hearing comments on why
this wasn't part of the design and what the timing safeguards are in
the existing "key out" signal to prevent hot switching on make/b
text refers to the "ACC" labeled connector as "AUX I/O" -
shouldn't this be consistent?
I believe there's an omission in the manual - TX INH is not listed in
the CONFIG menu section and I believe it should be.
73,
Barry N1EU
On 11/28/07, Don Wilhelm <[EMAIL PROTECT
pective K3 contesters.
73,
Barry N1EU
>Don, in the email below, says that the time delay in the K3 will accommodate
a QSK amp. That is only partially true. The problem is in setting it
up. I could,
of course, put in a LONG delay but then QSK is gone. If I crank the delay down,
at some point I
Simon, what was the dsp selectivity set at when you're using the 1Khz
and 250hz roofing filters? Was it likewise 1Khz and 250hz?
73,
Barry N1EU
>Here's a WAV recording ftp://ftp.ham-radio.ch/common/K3%20CW%20Demo.WAV
___
Elecraft mailing
Additional recordings would be great - from you or any other
K3 owners out there with a soundcard.
73,
Barry N1EU
>It's a 16-bit mono recording taken via the line-out using a high-quality
soundcard (USInterface.com Navigator). The K3 operator isn't all that
skilled but he's got half
m for all kinds of comments, laudatory and
critical. Everybody's motivation is making the K3 the best radio out
there, and it's off to a great start.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subsc
Great little clip Eric! How about a full length feature?
Nice to hear the K3 sounding good on cw.
73,
Barry N1EU
>http://www.liveleak.com/view?i=10f_1196591072
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
ore ringing.
>The above is true for both digital and analog filters.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://ma
>Barry N1EU, regarding your comment about shape factor, I assume you know
about the K3 Context filter.
Yes Bill, and I look forward to seeing how it works. But the filter
slopes on the context filter are not adjustable either so we're
talking apples and oranges. If the firmware can
e the parameter display right into their program or else to
read the K3 data and make it available through an OLE interface to
external programs.
73,
Barry N1EU
>I propose that an item for the SW development list (if it isn't there
already) be a Windoze app that takes all key parameters
Simon, any chance you could make about a 10sec recording of band noise
on an empty band with RX EQ set flat and 6Khz selectivity and either
post the WAV file or email it to me?
Thanks/73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft
Off the top of my head, Omni 7 has a big beautiful display and has TCP/IP
ethernet remoting built into it.
To my eyes, these are two VERY different radios. Why don't you download
both manuals from the mfr's Web sites and compare for yourself?
73,
Barry N1EU
Another way to ask th
ce without having to search through the
archives.
73,
Barry N1EU
>On another point, there was criticism of someone posting an assembly
question to the reflector. That is the whole point of the reflector,
simple "how does it fit" or "where does that go" questions are easily
re
It would be very cool if some future generation of PowerSDR software provided
a clickable bandmap overlay to the displayed spectrum from the K3.
Functions such as quick qsy to any point in the spectrum and labeling of
sigs with callsigns would be great tools for dxing/contesting.
73,
Barry N1EU
cally
oriented spectrum that would parallel the bandmap and move/resize in tandem
with it.
That would sure sell a bunch of K3's (as if they were sitting on the shelf
already . . . . ;-)
73,
Barry N1EU
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I think he was looking for an N1MM type band map
You can connect the subreceiver to a rx ant via the aux RF jack, without
having the KXV3 option.
See "Antenna Selection" at
http://www.zerobeat.net/mediawiki/index.php/K3_Stereo_Diversity_Reception_and_SO2V_Contesting
73/HNY,
Barry N1EU
DaleJ wrote:
>
> I'm trying to cl
Get a used Orion I - a bargain at around $2K and you'll be able to resell it
for little loss when your K3 is ready.
73,
Barry N1EU
Just wondering what Rig would be your second choice if you can't wait
forever to get a K3?
--
View this message in context:
http://www.nabble.com/
This is admittedly topic skew, but for non-critical occasional am listening,
it would be nice to have a much lower cost option than the $120 filters. A
cheap ceramic or 2-xtal filter, about 15Khz bw would have been a nice
addition to the K3, maybe even as a st'd component.
73,
Barry
electivity that will still
allow the 2.8Khz filter to be engaged
please tune to an empty spot on any band - I just want to hear the band
noise and run a spectral plot
Thanks & 73,
Barry N1EU
--
View this message in context:
http://www.nabble.com/Request-for-K3-recording---2.8Khz-filter-tp149
loped") totally depends on the context
of comparison and how quickly you're apt to butt up against the radio's
limitations. In tough band condx, I don't think it would be much of a
comparison.
73,
Barry N1EU
David and Dianne on Comcast wrote:
>
> Hi Everyone,
>
> T
Mike, I don't think the K3 will do what you think it will. The non-transmit
antenna (ANT1/ANT2) can't be used by the main receiver, only the
subreceiver. Look at figure 3 on p39 of the manual.
I'm sure someone will correct me if I'm wrong.
73,
Barry N1EU
Mike B-12 wr
ntenna.
>
> 4. Main on any of the above and sub on AUX RF. (Antenna Selection details)
>
Brett, under your option #1, you failed to mention the constraint that
ANT1 or ANT2 selection for the receivers must match the transmit
antenna selection. This was the essence of Mike&
t to say was "April foolish" , ja?
73,
Barry N1EU
--
View this message in context:
http://www.nabble.com/KRX3-Shipping-Date-tp15029880p15031897.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: E
assband is adjusted to at the factory with the
stock 2.7Khz filter?
Thanks/73,
Barry N1EU
--
View this message in context:
http://www.nabble.com/K3-ssb-tx-passband-tp15043223p15043223.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecra
o each receiver?
Can both receivers be tuned with the same vfo?
Can RF Gain be independently adjusted for main/sub rx (eg., using low
gain rx ant on subrx)?
Thanks & 73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
both the mainrx and subrx frequency.
3. Single button press that would "push the context" of the main
receiver to the subreceiver if the receivers are otherwise acting
independently.
Thanks & 73,
Barry N1EU
___
Elecraft mailing list
Pos
it should
be predictable based on the dynamic range downstream.
2. I NEVER use the Hi/Lo Cut controls (in favor of Width/PBT-Shift)
and not sure that anyone else does.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
AE6WA asked: "Will the K3 allow the second receiver to be connected to
a second antenna?
This would allow spatial or polarization diversity reception."
FYI, this was previously asked and answered - see
http://mailman.qth.net/pipermail/elecraft/2007-April/066568.html
73,
I'd like to suggest a K3 feature for the ability to optionally
reassign the SQL control to subreceiver RF Gain. This would make for
a beautifully symmetric pair of AF and RF Gain controls for main and
sub receivers, which would be great for frequent users of the
subreceiver.
Thanks &
http://n1eu.com/orion/so2v.htm
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
he K3 will be able to transmit through the
stock 2.7Khz filter and switch in a narrower filter when receiving.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. C
le to pull out weak cw signals or rendering them
unreadable.
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/ma
I've never owned an FT-2000, but I can't help but wonder at the
relatively high number of used FT-2000 radios offered for sale
(eham.net, qth.com) - it sure seems that a significant portion of new
owners are having issues with the radio.
73,
never use."
Unless I'm mistaken, I AM being forced to pay for an ATU option in
order to get a 2nd antenna input and to pay for a transverter option
to get a rx antenna input. I'm thrilled about the K3, just not
thrilled about this part of
nput for the main rx with the ANT1
input for transmitting. This setup is for diversity reception with
two rx antennas.
ANT1 - transmit antenna
KXV3 - rx antenna to main rx
ANT2 SO239 (no KAT3) - rx antenna to sub rx
Can someone please confirm this will be doable from the outset of K3 production?
igs out of high noise on the Orion.
Will the K3 afford adjustability of the DSP filter shape?
73,
Barry N1EU
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Are there any 3rd party software utilities available that will store
profiles with different tx setups including TX EQ?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
ot; Is
there a trick I'm missing?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Sorry, I switched computers and it worked like a charm. I've got a
computer issue I need to troubleshoot I guess. Sorry for the
bandwidth.
73, Barry N1EU
On Mon, Dec 7, 2015 at 9:32 PM, Barry N1EU wrote:
> I'm trying to get a K3S talking with N1MM Logger+ for the first time.
>
My monitor reports "no signal" from my P3 SVGA. I've gone into the
menu and enabled SVGA and set the resolution. Is there anything else
I need to do?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mail
I'd like to hear from folks who've owned the P3 transmit monitor for a
while. Can you please comment on why you do (or don't) find it useful
in day-to-day operating? Is it a tool you use often, just a cool toy,
etc ???
Thanks &
Is the waterfall speed adjustable?
Any brilliant insights on optimal cw waterfall setup gratefully
appreciated! I'm an old fan of the cw skimmer waterfall with traces
so clear you can easily read the cw dits/dahs.
Thanks & 73,
B
Can someone please describe how to simply change the speed of the
waterfall? The update rate doesn't change it.
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
I don't think it's available any longer. Perhaps someone has a copy
of the install files they can make available?
Thanks & 73,
Barry N1EU
On Thu, Dec 10, 2015 at 9:57 AM, Kjeld Holm wrote:
> Hi Elecrafters
> I find the utility K3EZ very useful. Going to a new computer I sea
eriod (rate) directly and obviously changes
the waterfall speed. And the P3?
Thanks & 73, Barry N1EU
On Thu, Dec 10, 2015 at 3:29 PM, d...@lightstream.net
wrote:
> Barry,
>
> It's as Fred said, it changes as a function of the "Rate" setting when
> running in the
Okay, what I think is tripping me up is the P3 internal waterfall
speed IS varying with update rate but the SVGA waterfall speed is not.
Barry N1EU
On Thu, Dec 10, 2015 at 11:08 PM, Barry N1EU wrote:
> Sorry for my dimness, but I've tried Tracking mode and Fixed-Tune
> mode, varying
Can you get a relative assessment of the degree of compression (speech
processing) by viewing the ssb waveform in the P3 TX monitor?
Barry N1EU
On Thu, Dec 10, 2015 at 8:30 PM, Nate Bargmann wrote:
> * On 2015 09 Dec 08:13 -0600, Barry N1EU wrote:
>> I'd like to hear from folks wh
If I'm reading the manual correctly, the K3s subreceiver (KRX3)
antenna is NOT normally disconnected by a relay during transmit,
although there's a carrier-operated protection relay in-line. Am I
correct in this regard?
Thanks &
x audio being driven?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http:/
Thanks Fred, I didn't. I've got Mic+Lin working fine with another
soundcard but can't get the USB audio to play through.
73, Barry N1EU
On Sat, Dec 12, 2015 at 2:01 PM, Cady, Fred wrote:
> Hi Barry,
> Make sure you don't have a cable plugged into the K3s Line In jack.
ndows Sound Playback level jumping up and down as expected
- audio is going to the device
Push PTT on K3s and absolutely no tx audio
Is there anything I'm possibly missing?
Thanks & 73,
Barry N1EU
On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU wrote:
> Would appreciate any tips to gettin
yes, it's already max
On Sat, Dec 12, 2015 at 6:16 PM, Rick WA6NHC wrote:
> Have you set the output levels on the OS driver? In mine, that should be at
> or near max output...
>
> Rick nhc
>
>
>
> On 12/12/2015 8:59 AM, Barry N1EU wrote:
>>
>> I
I know you need to have the MS.Net Framework installed to run K3 EZ
73, Barry N1EU
On Sun, Dec 13, 2015 at 1:16 PM, NZ0T wrote:
> Has anyone been able to get K3 EZ running in Linux with WINE? I use Mint for
> my primary OS and would like to use K3 EZ there. I have Win 10 dual booted
>
rding. Has anybody else tried this?
Thanks & 73,
Barry N1EU
On Mon, Dec 14, 2015 at 12:44 AM, Chris wrote:
> Have you set your mode to digi my k3 only tx audio when I use it in digi mode
> not lsb or usb or cw
>
&
It doesn't work with N1MM Logger+, probably the top application for
using SSB audio through the USB codec. I believe the N1MM team is
investigating.
73, Barry N1EU
On Mon, Dec 14, 2015 at 2:20 PM, Ed Muns wrote:
> The Codec deals with digitized audio of LINE IN and LINE OUT, indepe
Yes
73, Barry N1EU
On Mon, Dec 14, 2015 at 8:15 PM, johnpierce wrote:
> Has anyone used the K3 EZ software on a windows computer with the K3s? Is
> it compatible?
>
>
>
> John, AD2F
>
> __
> Elecraf
er to transmitter.
73, Barry N1EU
On Mon, Dec 14, 2015 at 9:33 PM, Cady, Fred wrote:
> No problem here with N1MM+ playing wav files through the USB audio codec. Or
> with WSJT or MMTTY.
> In N1MM+ you have to (or can) have the wav files in a directory
> ../wav/{operator}/...wav where
I have it working now, thanks for the helpful suggestions. I don't
know why it's suddenly working, I didn't change anything. I'll keep
an eye on it.
73, Barry N1EU
On Mon, Dec 14, 2015 at 10:01 PM, Cady, Fred wrote:
> Hi Barry,
> Have you tried using the K3s regular
Thanks for posting this Roy. Not one mention of the loud relay in 31
eHam reviews and it's something that obviously would bother some of us
(me) more than others.
73, Barry N1EU
On Thu, Dec 24, 2015 at 8:03 AM, Roy Koeppe wrote:
> " looking for input on how well the K3 will integ
options is the
integral telnet connection that will paint a bandmap superimposed on the
spectral display.
73, Barry N1EU
On Thu, Dec 24, 2015 at 11:47 AM, Juliean Galak wrote:
> I'm planning on getting a K3s and am wondering about panadapters. There's
> obviously the P3, but there
Is there an acceptable range of headphone impedance for the K3/K3s?
I've got some 300-ohm headphones and wondering if the impedance alone
makes them a poor choice for my K3s?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
H
Thanks for all the public and private responses! My 300-ohm
headphones should not be a problem for the K3s.
73, Barry N1EU
On Mon, Dec 28, 2015 at 10:20 AM, W2RU - Bud Hippisley
wrote:
> The headphones I have used for over a decade are 600-ohm high-end stereo
> high-fidelity phones. I
I believe this also means that the K3 headphone output circuit will
deliver 10X power (with fixed V, P~1/R) into a 30-ohm headphone as a
300-ohm headphone, so at some point the amp might clip as you raise
the headphone impedance?
Barry N1EU
On Mon, Dec 28, 2015 at 12:57 PM, Jim Brown wrote
give them a thumbs up if you need an isolating type
headphone, although I prefer the higher priced Beyer DT770M. If you
don't need the isolation, I prefer the more comfortable and better
sounding circumaural open-back Sennheisers.
73,
Barry N1EU
On Tue, Dec 29, 2015 at 12:02 AM, AB2E Darr
dphone impedance
and efficiency that makes up for the inverse relationship between
output power and load impedance. I just don't observe this efficiency
rule consistently in my collection of headphones with varying
impedance. Headphone efficiency clearly has other dependencies than
impedance.
I think the OP was asking for main/main L/R balance control which SUB
AF will not provide
73, Barry N1EU
On Tue, Dec 29, 2015 at 9:15 AM, Jeff Schmidt wrote:
> Mike,
> CONFIG: SUB AF: bALANCE will do what you want, minus the individual EQ
> curve.
>
> Jeff, KC9WSJ
>
>
Dave, can you comment on how the isolation compares between the CM500
and the SB-45? Does the SB-45 provide more isolation?
Thanks & 73,
Barry N1EU
On Mon, Dec 28, 2015 at 6:39 PM, Dave Hachadorian wrote:
> It's quite a coincidence that you asked about the Koss SB-45, because I jus
Pre-distortion dsp processing on the tx signal makes a DRAMATIC
improvement. Check out the tx spectrum and waterfall outside the filter
passband on this video before and after W1AEX switches in pre-distortion at
34 seconds in: https://www.youtube.com/watch?v=MCm3mKHyuAo
73/HNY,
Barry N1EU
On
You'll get hum if your computer and K3 chassis aren't at the same
ground potential. For many, it may be preferable to use the rear
panel Line Out, which is transformer isolated.
73, Barry N1EU
On Thu, Dec 31, 2015 at 2:15 PM, ab2tc wrote:
> Hi again,
>
> BTW, some people ha
em because of that SSL cert.
Barry N1EU
On Sat, Jan 2, 2016 at 12:02 AM, ab2tc wrote:
> Hi,
>
> Are you suggesting that this may be the reason why a number of us
> (apparently all with Verizon FIOS) cannot reach the web site?
>
> AB2TC - Knut
>
> Byron Peebles wrote
&
t6.cruzio.com>. This may be caused by a misconfiguration or an
attacker intercepting your connection.*
Barry N1EU
On Sat, Jan 2, 2016 at 10:46 AM, Oliver Dröse wrote:
> http://www.elecraft.com is not using any certificates (just checked),
> it's just plain http, not https (thus no need for ce
There's a 4KHz low pass audio filter inline that will limit the rx audio
passband, even if the width control allowed you to go higher.
Barry N1EU
On Sat, Jan 2, 2016 at 9:32 PM, Mike Weir wrote:
> Good afternoon all, I have for some time now had the 6 Khz filter
> installed in m
Yes, but who ever said it was a DNS issue?
On Mon, Jan 4, 2016 at 9:27 PM, Mark E. Musick
wrote:
> Yes, it can take up to 48 hours to propagate.
>
>
> Mark, WB9CIF
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Matt
> Zilmer
> Sent: Monday,
It is NOT a routing issue. Knut and I have identical tracert after
the first few hopes and I've never had an issue with connecting.
Barry N1EU
On Mon, Jan 4, 2016 at 11:53 PM, tomb18 wrote:
> I had the same thing in the past where I couldn't access Price Waterhouse
> from
cilloscope). I'm wondering how dynamic the xmit waveform display is in
cw, AM and SSB.
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
There was a discussion a while back on the Flex forum about their
implementation of CESSB in the 6000 series:
https://community.flexradio.com/flexradio/topics/cessb-questions
OpenHPSDR also implemented CESSB, about a year ago.
73, Barry N1EU
On Wed, Jan 13, 2016 at 11:36 AM, NC3Z Gary wrote
If anybody has a spare Inrad 250Hz 8-pole filter for the K3, please email
me directly.
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
This is fantastic Dave and a groundbreaking development in rig
interfacing. Have you, or do you intend to, physically label the keys?
I NEED one of these.
Thanks & 73,
Barry N1EU
On Fri, Jan 22, 2016 at 10:17 AM, David Cole wrote:
> Hi Fred,
>
> I have no reason to believe it wo
. Also, users could toggle it on/off and return back to classic P3
display as desired.
I was thinking that something like this plus NK7Z's Genovation macro
generator would turn the K3/K3S/P3 into my dream machine ;-)
Thoughts?
73, Barry N1EU
__
their
manual/auto gain settings, and not just willy nilly copy other people's
settings.
73, Barry N1EU
On Sat, Jan 23, 2016 at 4:19 PM, Don Wilhelm wrote:
> Donald,
>
> The AGC settings, particularly the slope and the threshold are best set to
> your individual preferences. There
I've got the digital readout WESD51, very pleased, and good assortment of
tips available.
Barry N1EU
On Sun, Jan 24, 2016 at 5:13 AM, AB2E Darrell wrote:
> Ditto here on the WES51 solder station, very well-built and reliable.
> 73 D
CONFIG: VFO LNK
73, Barry N1EU
On Mon, Jan 25, 2016 at 11:10 AM, Paul VanOveren wrote:
> I can not link the VFOS, an instantaneous push turns on the SUB receiver
> ok, but anything longer that an instantaneous push, indicates DIVERSITY on
> the B display. There is no inbetween, where
just get the wider cw filter.
Barry N1EU
On Thu, Jan 28, 2016 at 2:04 PM, Clay Autery wrote:
> OK... so I don't have time to complete my stack of cash for my K-Line
> order... I've paired it back. Anyone interested in offering me a
> second pair of eyes to see if I am mak
Visual Analyser 2014 software. It
mirrors what I hear in my headphones.
73, Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.n
is
4000Hz, within a 6KHz wide roofing filter. I don't understand the
discrepancy between selected bandwidth and what the K3/K3s is providing.
For comparison, a passband curve in AM mode is also shown and it reveals
extended flat response from below 50hz to almost 4000Hz.
73, Barry N1EU
&
t proving this point is visible at
http://k3s.wikidot.com
73, Barry N1EU
>
> 73
> Bob, K4TAX
>
> On 1/29/2016 7:07 PM, David Ahrendts wrote:
>
>> Am I correct that you do not achieve 4.0 kHz ESSB (widest TX with the
>> K3S) without selecting the 6.0 kHz cryst
Does anyone know a way to program a K3 macro to set the Subreceiver antenna
selectively to Main or Aux?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
Thanks Dick but a switch toggle won't work - the result is indeterminate
unless there's a way to reset to a known value first. Is there a key
sequence that will place the subreceiver antenna selection in a known state?
Barry N1EU
On Tue, Feb 2, 2016 at 1:34 AM, RIchard Williams
wrote
1 - 100 of 504 matches
Mail list logo