one.
73,
Frank - W6NEK
Windy Dankoff KM5Q wrote:
Start them with a Heathkit nut starter! It's a little plastic tube
just soft enough to stretch over the two main sizes of nuts. Makes it
SO much easier to start those little buggers.
You'll need to find an Old Master who saved them
Hello Elecraft,
Can you please provide an update on the shipping status of the KRX3??
Based on the current website info, delivery must be very close.
Any info greatly appreciated,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft
to simultaneously
listen to two inband frequencies at once. It's a very powerful addition to
the K3.
Just passing along info to K3 users who may be interested in adding a
computer supported panadapter to their K3.
73,
Frank - W6NEK
- Original Message -
From: Jerry Flanders [EMAIL
, the entire team at Elecraft for designing the K3
which has brought back the fun in my HAM radio operating!
Best 73,
Frank - W6NEK
- Original Message -
From: n4lq [EMAIL PROTECTED]
To: David and Dianne on Comcast [EMAIL PROTECTED];
elecraft@mailman.qth.net
Sent: Wednesday, May 28
. As I mentioned in a earlier post, it has been achieved using
PowerSDR LP-PAN.
When not using PowerSDR I simply enter the 1st two digits of the band I want
to go to and press enter. Works for me.
Best 73,
Frank - W6NEK
- Original Message -
From: Dave Van Wallaghen [EMAIL PROTECTED
listening to SW
broadcasts. Works great!
Thanks for any info on 7800 Sync AM,
Frank - W6NEK
- Original Message -
From: Shane White [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, June 19, 2008 4:39 PM
Subject: Re: [Elecraft] K3: Synchronous AM Receive
WW2PT wrote
if that is correct?
Frank - W6NEK, K3 S/N 312, KRX3 back-ordered on May 5th, 2007
Original Message:
I just received from Elecraft, confirmation that my two K3's factory
assembled with respective second receivers are being built and will ship in
two weeks.
My two units SN 423 and 434 were on hold
, you can custom design many pertinent rig setting into a
single key press.
It keeps getting better and better ;-)
Frank - W6NEK
- Original Message -
From: W0FK llader...@earthlink.net
Thanks for the sub on addition, Richard.
Lou, W0FK
Thanks Wayne for letting me try the new
.
(See page 34 of K3 Owners Manual Rev D4)
73,
Frank - W6NEK
- Original Message -
From: VE3NFK john.turgo...@gmail.com
To: elecraft@mailman.qth.net
Sent: Saturday, October 31, 2009 4:27 PM
Subject: [Elecraft] K3 DATA question
Hello
Playing around listening to PSK / Pactor some Hell etc
see CONFIG:PTT-KEY. If necessary, try removing the KIO3 module or its
digital I/O daughter board.
Check to see if your key is closed, or PTT is shorted or external software
has RTS or DTR set to PTT the rig.
Hope this helps,
Frank - W6NEK
- Original Message -
From: eric norris
/TUNE to exit the TUNE mode and the K3 will return to
LSB mode and the power will be set to its previous value of 100 watts.
If your K3 is not working as I have described then you may want to
contact k3supp...@elecraft.com for help correcting the problem.
Best of luck,
Frank - W6NEK
On 12/23
Keith, you can start here:
http://www.elecraft.com/K3/k3_app_notes.htm
Best 73,
Frank - W6NEK
- Original Message -
From: Keith Bainbridge vk...@arach.net.au
To: elecraft@mailman.qth.net
Sent: Wednesday, December 17, 2008 5:44 AM
Subject: [Elecraft] K3 No 133
Ok I've been very
of Elecraft for encouraging it's
customers to make suggestions and actually implement a significant number of
change requests. Elecraft is truly unique in this regard. Thank you!
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
function is turned
OFF. So it looks like half the request I asked for is already implemented!
Now all that is needed is to change the firmware to leave the CWT function
in whatever state I left it in prior to changing from CW to any other mode.
Thanks for your input Joe,
Frank - W6NEK
- Original
/tune and a quick
turn of the width control to 50 Hz bandwidth. The way Elecraft implemented
the CWT function is fast, intuitive and repeatable. It's one of my favorite
features in CW mode on the K3.
Best 73,
Frank - W6NEK
- Original Message -
From: K9ZTV
Cc: elecraft@mailman.qth.net
Hi Keith,
From the K3 Owners Manual (Page 17):
KEY OUT (RCA/Phono) is the (linear) amplifier T-R relay keying output,
capable of keying up to +200VDC @ 5A.
Manual Index KEY OUT: Pages 17, 19, 57
Best 73,
Frank - W6NEK
- Original Message -
From: Darwin, Keith
To: elecraft
).
The rig that keeps on giving ;-)
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Hi Michael,
That is a meaningful and outstanding suggestion. I would really like to see
Elecraft add it to the List.
Frank - W6NEK
- Original Message -
From: The Smiths
To: elecraft@mailman.qth.net
Sent: Tuesday, February 03, 2009 8:54 PM
Subject: [Elecraft] ECO for SPOT Control
I
Wow that was fast!
It's already in there!
Guess it's time to review all the menu settings.
Who knows what other nifty things I'll find!
Red faced,
Frank - W6NEK
- Original Message -
From: W6NEK w6...@socal.rr.com
To: 'Elecraft Reflector' elecraft@mailman.qth.net
Sent: Saturday, April 04
That is an outstanding suggestion Joe!
Simple and elegant. I hope it makes it to The List!
Frank- W6NEK
- Original Message -
From: Joe Subich, W4TV li...@subich.com
Sent: Saturday, April 04, 2009 4:27 PM
Subject: Re: [Elecraft] K3 Assembly
SNIP
All that's necessary is to set MEM 0
Here is where I found the latest K3 beta download:
ftp://ftp.elecraft.com/K3/firmware/beta/
Once connected, download zip file K3fw3r11.zip
73,
Frank - W6NEK
- Original Message -
From: K7WIA emoss98...@msn.com
To: elecraft@mailman.qth.net
Sent: Tuesday, April 21, 2009 4:58 PM
Subject
out there with a
detailed working knowledge of the K3 can help guide me in the right
direction. I do have a good RF Signal Generator, OScope, etc to do signal
tracing as necessary.
Thanks for any help,
Frank - W6NEK
__
Elecraft mailing
I need to clarify my opening statement.
The Main and Sub Receivers are both deaf on 6 meters only.
Thanks,
Frank - W6NEK
- Original Message -
From: W6NEK w6...@socal.rr.com
To: elecraft@mailman.qth.net
Sent: Thursday, July 16, 2009 1:02 PM
Subject: [Elecraft] K3 both main and sub
have nothing connected to the RX Ant Input!) While I have egg on my face I
also have a big smile. Sure glad it was a loose nut behind the main tuning
knob and not a real hardware problem!
Thanks again for all the feedback,
Frank - W6NEK
- Original Message -
From: Brian Alsop als
the K3 to it's frequency). I'm so spoiled that I seldom use the 7800
for CW operation anymore. Add to that CWSkimmer (running at the same time)
and I died and gone to heaven ;-)
Frank - W6NEK
- Original Message -
From: N1IX n...@n1ix.com
To: elecraft@mailman.qth.net
Sent: Tuesday
display, 400 KHz max display span, matching K3 esthetics. Going
to be a very popular accessory for the K3.
73,
Frank - W6NEK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Ref: K3 Owners Manual Rev D2
Page 52 under Menu Functions, Main Menu: LED BRT
Frank - W6NEK
- Original Message -
From: Roy Morris w4...@carolina.rr.com
To: elecraft@mailman.qth.net
Sent: Tuesday, September 01, 2009 8:42 AM
Subject: [Elecraft] Setting K3 LED Brightness
Quite
if it's
internal or not.
73,
Frank - W6NEK
- Original Message -
From: K2/100 S/N 868 [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Wednesday, July 16, 2008 11:16 AM
Subject: [Elecraft] Birdie ?
I am showing a very strong signal at 3590 KHz - is this normal ?
Thanks,
TR
reloaded MCU 2.16 (DSP 184) and now NR signal volume level is once again
balanced between NR ON and NR OFF.
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hi Jerry,
I back ordered my KRX3 on 5/5/2007.
Received Katiegram 7/29/2008
Received UPS notice that KRX3 has shipped 8/4/2008
KRX3 is due to arrive on 8/6/2008
My K3 S/N is 312
You should be getting yours soon.
Best 73,
Frank - W6NEK
- Original Message -
From: Jerry T. Dowell [EMAIL
Hi Dave,
Push and hold the SUB key to LINK and UNLINK the VFO (toggle function).
73,
Frank - W6NEK
- Original Message -
From: Dave W7DPW [EMAIL PROTECTED]
To: k3 elecraft@mailman.qth.net
Sent: Wednesday, August 06, 2008 11:03 AM
Subject: [Elecraft] LINK Command
I've received my K3
- W6NEK
- Original Message -
From: Barry Simpson [EMAIL PROTECTED]
To: 'Elecraft' elecraft@mailman.qth.net
Sent: Tuesday, August 12, 2008 2:49 AM
Subject: [Elecraft] K3 and SM20
In readiness to use my new K3 I have rewired my Icom SM20 mic to the K3
configuration. I was surprised to find
Hi Oliver,
How about the NET meets on a specific frequency and everyone tunes to that
specific frequency.
That will work too,
Frank - W6NEK
- Original Message -
From: O. Johns [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Thursday, August 14, 2008 4:41 PM
Subject: [Elecraft
/detail/5981
73,
Frank - W6NEK
- Original Message -
From: Joe G [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, October 04, 2008 11:23 AM
Subject: [K3] [Elecraft] Power meter
Can anyone suggest a good power meter to calibrate the K3
Joe
W1JGS
-
Joe
W1JGS
--
View
and actually have the lead designers hear you!!!
Best 73,
Frank - W6NEK
- Original Message -
From: Larry Naumann [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, October 22, 2008 11:12 AM
Subject: [Elecraft] K3: CWT and Volume wish list
I have a couple of minor things
then the addition of the
LP-PAN IF interface and PowerSDR software to the K3 is, in my opinion, the
single biggest enhancement available for the K3 (in fixed station use) at
this time.
My 2 cents,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft
Hello K3'ers
For those interested in K3 shipment status, the elecraft web site has been
updated.
http://www.elecraft.com/elecraft_shipping_status.htm
73,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Better yet, instead of collecting S/N's in an attempt to guesstimate what
shipped last week, how about a weekly shipping status update?
Please Elecraft; enlighten those of us who are in the 1st batch and waiting.
Information please!
Thank you,
Frank - W6NEK Batch #1, May 5th.
Day 220 - yes I'm
Updated shipping schedule has been posted on the web site.
73,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
I also received notice last night from Lisa that my K3/100 Kit will ship in
3-5 days. My order was placed on May 5th with NO deposit. Looks like
Elecraft is picking up steam in K3 deliveries. Good news for everyone!
Frank - W6NEK
- Original Message -
From: Phil Debbie Salas
For those keeping track of K3 deliveries:
Order date May 5, 2007 (NO DEPOSIT)
K3/100 (S/N 312) shipped from Elecraft on Jan. 25, 2008
Received Jan. 29, 2008
73,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
and watt meter set-up.
Best 73,
Frank - W6NEK
K3 #312
- Original Message -
From: mark roz [EMAIL PROTECTED]
To: Elecraft elecraft@mailman.qth.net
Sent: Monday, February 04, 2008 1:23 PM
Subject: [Elecraft] K3 SSB average power output
With SSB mic level adjusted to the max level (ALC
input,
Frank - W6NEK
Dave G4AON wrote:
Bryan
You can set the S-Meter to whatever you want, given that most other HF
transceiver S-Meters are nowhere near as accurate as that in a K3. The
recommended setting with firmware ver 1.66 is SMTR SC=14 and SMTR OF=24
(from the firmware notes
Thanks for the info Bill,
That puts my mind at ease knowing that what I observed (below) is normal
given the current state of firmware development. No problem, I'll just wait
for the future firmware correction. By the way, my rig has the HAGC
hardware mod installed.
Best 73,
Frank - W6NEK
K3
it's called
BK-IN (Break-in).
There's nothing wrong with your K3,
Frank - W6NEK
K3 312
- Original Message -
From: Joe [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, February 14, 2008 10:31 AM
Subject: [Elecraft] CW with my new k3
K3/KPA #241 is operational. When
to participate!
Given the fact that Solardx admitted: I might have a faulty unit and I am
not really sure, tells me he made a frustrated, disappointed, premature
eHam post.
Best 73,
Frank - W6NEK
- Original Message -
From: AD6XY - Mike [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent
I can't locate where the latest K3 Utility (version 1.1.3.6) is located.
The latest I see on the Elecraft site for download is version 1.1.1.28
Anyone have a link??
73,
Frank - W6NEK
- Original Message -
From: wayne burdick [EMAIL PROTECTED]
To: Elecraft Reflector elecraft
- W6NEK - (A HAM since 1959)
- Original Message -
From: [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, June 23, 2007 7:52 AM
Subject: Re: [Elecraft] OT: Hate the word ham
I'll offer a comment here...
I beleive that the phrase ham radio operators carries more recognition
this?
Thanks,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi,
Does anyone know when the K3 Owner's Manual will be posted on the Elecraft
web site?
Now that I've fully digested the K3 Kit Assembly Manual, I'm anxious to see
the detailed owner's manual.
Any info, especially from Elecraft, is most welcomed,
Frank - W6NEK, K3 ??? (first batch
- W6NEK
- Original Message -
From: Carl Clawson [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Friday, September 21, 2007 10:11 AM
Subject: RE: [Elecraft] K3 and QSK
Let us be clear. There are two questions in this discussion.
#1. Can you use external PTT to put the rig in CW
demonstration of the CW to RTTY
translator built into the K3. In addition, Tom's signal was 10 over S9 and the
RTTY signal was clean and perfect copy (using MixW 2.18).
Great demonstration of the K3 CW to RTTY capability. Darn, I can't wait to get
my hands on my K3!
Best 73,
Frank - W6NEK
Great Lyle,
Perfect, that's exactly what the SM-20 needs to power the internal preamp.
I'll continue on with the mic adapter plug.
Thanks,
Frank - W6NEK
- Original Message -
From: Lyle Johnson [EMAIL PROTECTED]
To: 'Elecraft Discussion List' elecraft@mailman.qth.net
Sent: Saturday
It's been a long while since we have had any update on the availability of
the new Elecraft HF Amplifiers. Is there any information to report? Wayne?
Eric? This year? ;-) Next Year? :-(
Inquiring minds want to know!
Best 73,
Frank - W6NEK
I own the Alpha (87A) but instead I purchased the LP-100 digital watt meter
kit by N8LP. Just as accurate, at 1/5th the price, and it will match the
looks of my Alpha even better! Got to love the sexy PLED Display ;-)
Frank - W6NEK
Larry N8LP wrote:
Because it matches your Alpha
a dial-up account)
This is my 12th K2 kit and it was as much fun to build as my first.
Thanks for the bandwidth,
Frank - W6NEK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hello All,
The subject K2 has been SOLD.
Thank you for the response and comments regarding this K2.
73,
Frank - W6NEK
- Original Message -
From: W6NEK [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, July 31, 2006 3:47 PM
Subject: [Elecraft] For Sale New K2
Hello Fellow
in front of 7800. Is just feels great to
operate. Therefore, is there room for a Sienna at my QTH? If it performs
like a K2, and feels like a 7800 then you bet there is! Bring it on guys.
The more choice in the HAM market place the better!
73,
Frank - W6NEK
- Original Message -
From: Brian
. Just click
the AVG Button off.
73,
Frank - W6NEK
- Original Message -
From: Brett Howard br...@livecomputers.com
To: Lyle Johnson k...@wavecable.com
Cc: Elecraft Group elecraft@mailman.qth.net
Sent: Monday, June 28, 2010 12:57 PM
Subject: Re: [Elecraft] Fwd: [FlexEdge] Field Day, Focus
it to any value from
1 to 350ms to your liking.
Best 73,
Frank - W6NEK
- Original Message -
From: Brett Howard br...@livecomputers.com
To: W6NEK w6...@socal.rr.com
Cc: Elecraft Group elecraft@mailman.qth.net
Sent: Monday, June 28, 2010 3:03 PM
Subject: Re: [Elecraft] Fwd: [FlexEdge] Field Day
Hello Ian,
While in CW mode just press and hold the VOX function Off (press left side
of Band Select Button in upper left corner of K3). With the VOX function
Off in CW mode the PTT function will be enabled which will allow you to use
your foot switch for Tx/Rx change over.
73,
Frank - W6NEK
at all ;-)
If someone could send me a copy ( or a link ) I would be most grateful,
Thanks and 73,
Frank - W6NEK
w6nek at socal.rr.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Many thanks to Dick for response.
Best 73,
Frank - W6NEK
- Original Message -
From: W6NEK w6...@socal.rr.com
To: Elecraft@mailman.qth.net
Sent: Thursday, July 22, 2010 11:31 AM
Subject: [Elecraft] K3 Memory Manager - MCU 3.94 requesting beta copy
Hello All,
Does anyone out
- W6NEK
- Original Message -
From: Julian, G4ILO julian.g4...@gmail.com
To: elecraft@mailman.qth.net
Sent: Wednesday, September 08, 2010 7:07 AM
Subject: Re: [Elecraft] NCDXF/IARU Beacons
I think the problem is, as you say, the decoder isn't sensitive on weak
signals. But what's
999.00 KHz.
2. Now tune the VFO to 1000 KHz and note the Center Freq Display reads
1.000.00 KHz.
3. Now return the VFO to 999 KHz and note the incorrect Center Freq Display
now reads 1999.000 rather then 999.00.
Can anyone else confirm this?
73... Frank - W6NEK
the
various K3 settings. It runs fine on my Win XP PRO partition. I really
like K3_EZ.
73,
Frank - W6NEK
- Original Message -
From: W4CCS w4...@w4ccs.com
To: elecraft@mailman.qth.net
Sent: Monday, January 25, 2010 3:39 PM
Subject: Re: [Elecraft] Windows 7 32 bit
Mike:
I'm running
operating
performance that I'll never again purchase any rig that isn't provisioned
for one. I need my Radio Eyes.
Best 73,
Frank - W6NEK
- Original Message -
From: Steve Ellington n...@carolina.rr.com
To: Björn Mohr b...@broadcast.se; Elecraft Reflector
elecraft@mailman.qth.net
Sent
Great suggestion Ted,
It would be a very helpful addition to split operation and add to the
Elecraft K3 operating elegance.
Frank - W6NEK
- Original Message -
From: Ted Roycraft w...@comcast.net
To: 'Elecraft_List' elecraft@mailman.qth.net
Sent: Saturday, April 10, 2010 8:19 PM
Subject
Hi Dave,
Here is a direct link to the K3 ALC mod:
http://www.elecraft.com/K3/mods/K3ALCMod_Rev_B.pdf
Best 73,
Frank - W6NEK
- Original Message -
From: Dave Anderson, K4SV davek...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Friday, May 28, 2010 1:30 PM
Subject: Re: [Elecraft] ELECRAFT
steps with
the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining 16
tailored for SSB mode (F5-1 thru F8-4). While not as convenient as the
variable NR setting on the FT5000, it's just as effective. You can read all
about it on page 25 of the Operating Manual.
73,
Frank - W6NEK
while listing?
As far as I know NR TAP HOLD (NR ADJ) is the only way to accomplish what he
wants.
Is there an easier way that I missed?
73... Frank - W6NEK
- Original Message -
From: Gary Gregory
To: W6NEK
Cc: elecraft@mailman.qth.net
Sent: Sunday, September 02, 2012 2:28 PM
For anyone following this post, does Abbot and Costello's Who's on first
routine ring any bells?
I'm done, now back from whence I came,
Frank - W6NEK
- Original Message -
From: Gary Gregory
To: W6NEK
Cc: elecraft@mailman.qth.net
Sent: Sunday, September 02, 2012 4:00 PM
-Meter display
would lead one to think the RF Gain Control is fully off (counterclockwise,
which it is not). Is anyone else seeing this kind of behavor? Maybe this
is explained in the Manual and I overlooked it, but it sure seems strange to
me.
Thanks for your feedback,
Frank - W6NEK
Thanks Dick and George,
Looks like I have a hardware problem and need to contact Elecraft Support.
I wanted to make sure that this wasn't normal before contacting them.
Many thanks for the feedback,
Frank - W6NEK
- Original Message -
From: W6NEK w6...@socal.rr.com
To: Elecraft
-Meters were calibrated within a few minutes.
Fast and easy fix!
As always, Elecraft support is quick to respond. Outstanding service and
support. Thanks again Gary!
Thanks for the bandwidth,
Frank - W6NEK
K3 S/N 312
- Original Message -
From: W6NEK w6...@socal.rr.com
To: Elecraft
You're not alone Don. I have the exact same issue. If I place my hand on
the top of the P3 cabinet the displayed noise goes to zero. I'll be
interested to see what kind of feedback you receive.
Frank - W6NEK
- Original Message -
From: Don Wines dwi...@suddenlink.net
To: Elecraft
Hello Ian,
Set Config Menu TECH MD to ON.
The various AGC menu setting will then be available.
73,
Frank - W6NEK
- Original Message -
From: Ian Kahn ak4ik@gmail.com
To: elecraft@mailman.qth.net
Sent: Thursday, May 26, 2011 6:25 PM
Subject: [Elecraft] Question about setting AGC
I
Go to these websites. Everything you want to know about CWSkimmer reverse
beacons:
http://www.dxatlas.com/CwSkimmer/
http://www.dxatlas.com/CwSkimmer/Files/Skimmerintro.pdf
http://www.reversebeacon.net/
Frank - W6NEK
- Original Message -
From: Hanford R Wright jo...@earthlink.net
. Is there a
separate menu adjustment that prevents the VGA pan display level from dropping
-15 dbm when the either receive VFO is tuned? I just know I have something set
up wrong in the menu system.
Any input welcome,
Frank - W6NEK
__
Elecraft
in Tracking
Mode. LP-PAN/NaP3 displays properly in tracking mode but then again I have
a Intel I7 powered PC doing the heavy lifting ;-)
Thanks again for the info,
Frank - W6NEK
- Original Message -
From: Vic K2VCO k2vco@gmail.com
To: elecraft@mailman.qth.net
Sent: Friday, March 23
Display is
duplicated on the P3SVGA display. What you are experiencing does not sound
normal. Perhaps a P3 guru can shed some light on what you are experiencing.
Frank - W6NEK
- Original Message -
From: Toby Pennington toby...@embarqmail.com
To: Elecraft@mailman.qth.net
Sent: Sunday
:
http://www.xenarc.com/product/700ts.html
73,
Frank - W6NEK
- Original Message -
From: David Christ radio...@mchsi.com
To: Joel Black joel.b.bl...@gmail.com; :@mailman.qth.net
Sent: Tuesday, March 27, 2012 11:20 AM
Subject: Re: [Elecraft] Medium size monitor for P3?
All these small
Read your post while drinking my morning cup of joe.
I laughed so hard coffee came out of my nose!
Frank - W6NEK
- Original Message -
From: W4SK w...@comcast.net
To: Dyarnes w7...@cox.net; elecraft yahoo groups
elecraft...@yahoogroups.com
Cc: elecraft@mailman.qth.net
Sent: Sunday
for everyone waiting for a KPA500 kit.
Frank - W6NEK
- Original Message -
From: Roy Morris w4...@carolina.rr.com
To: elecraft@mailman.qth.net
Sent: Sunday, July 17, 2011 8:24 AM
Subject: [Elecraft] KPA500 Kit
My KPA500 kit was ordered on 4/17/11. I received my shipping notice on
7/13/11
For those keeping track of KPA500K deliveries:
KPA500K ordered 5/17/11
Received notice of delivery on 7/15/11
Received KPA500K S/N 236 on 7/21/11
Guess what I'll be doing today? ;-)
73,
Frank - W6NEK
__
Elecraft mailing list
Home: http
their investigation.
Frank - W6NEK
- Original Message -
From: ai6ii ai...@att.net
To: elecraft@mailman.qth.net
Sent: Monday, August 01, 2011 10:13 PM
Subject: Re: [Elecraft] KPA 500 Hum
I too have noticed a hum emanating from the KPA500 (#26), but the
circumstances are a bit strange. The hum
. ;-)
Frank - W6NEK
- Original Message -
From: W6NEK w6...@socal.rr.com
To: elecraft@mailman.qth.net
Sent: Wednesday, August 03, 2011 8:59 AM
Subject: Re: [Elecraft] KPA 500 Hum
I confirm the exact same hum issue as Mike describes below.
(Front panel power switch is off
mode setting.
To turn off your 17 meter REV Data mode icon just press and hold the MODE
left down-arrow (ALT).
Frank - W6NEK
- Original Message -
From: Phil Anderson aldenmcduf...@sunflower.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, December 28, 2014 2:59 PM
not noticed
any degradation to the TFT display brightness or resolution. Neither have I
notice any evidence of dead pixels. From my own experience, I am not
concerned about the TFT display.
Frank - W6NEK
- Original Message -
From: "Steve Ellington" <steven...@gmail.com>
89 matches
Mail list logo